Hi to all !
In my note 4 910F "HUI" H3G ITA Lollipop BOC3 is possible activate in search network menu mode LTE only ? I have LTE/WCDMA/GSM - WCDMA/GSM - only WCDMA - only GSM not only LTE .In kitkat with exposed are possible install module in lollipo no.
Any solution ?
my device is rooted!
you can set it "LTE only" from the service menu (there was a thread here on the Note 4 forum about that menu),
but you wouldn´t be able to call, because calls are handled over "3G" thats why it isn´t selctable from the normal settings
Before having the option in the menu was necessary for easy selection. In the service menu it is very inconvenient select every time.
fiatuno said:
Before having the option in the menu was necessary for easy selection. In the service menu it is very inconvenient select every time.
Click to expand...
Click to collapse
hi ,
if you are rooted and on Lollipop ,then its no problem .?
i have a N910F ,rooted and using a app Toggle Network ( XDA link )
http://forum.xda-developers.com/android/apps-games/widget-toggle-network-type-5-0-xda-t2945406
it is a only a matter of clicking on widget .
very fast switching, networks and works 100%
good luck
(see sceen shot )
Very tanks! It work perfect end is FREE.
For the moment is good solution and wait for original mod menu.
thanks again
Related
Does it exist on the captivate? I cant find a way to run my phone in edge only to save battery....
Thanks.
You'd have to run certain custom ROM's that have it enabled. Unfortunately they change so often I cannot remember which one offered it.
I would check Auxura ROM in the dev forum here - I "think" they had that feature enabled.
psufan5 said:
Does it exist on the captivate? I cant find a way to run my phone in edge only to save battery....
Thanks.
Click to expand...
Click to collapse
You could try the following:
Put your phone in service mode by dialing *#*#197328640#*#*
Then type 1 for Debug
Then 8 for Phone Control
Then 4 for UE State Control
and then 3 to change to GSM
then Menu-> exit.
JoeDV said:
You could try the following:
Put your phone in service mode by dialing *#*#197328640#*#*
Then type 1 for Debug
Then 8 for Phone Control
Then 4 for UE State Control
and then 3 to change to GSM
then Menu-> exit.
Click to expand...
Click to collapse
Yep, that's what I do during the week as the 3G signal by my office isn't so great. To go back to 3G, it's option 2 instead of 3 (WCDMA).
Think there's a way to create Launcher Pro buttons to have it switch using shortcuts instead of having to dial all that?
just to add some additional info.
Running Axura 2.4, you have the following options in the usual settings menu => Wireless and Network => Mobile Network Settings
GSM/CDMA
GSM Only
CDMA Only
avgjoegeek said:
Think there's a way to create Launcher Pro buttons to have it switch using shortcuts instead of having to dial all that?
Click to expand...
Click to collapse
I just added the number as a contact. Whenever I want to access it, it pops right up after dialing #.
I'm after a way to be able to switch from GSM Only - WCDMA/GSM Auto.
Plenty of widgets that claim they do it, but most of them are "Mobile Data" switches, which I find useless as I can do that from my status bar...
Not even sure if its possible on a stock 2.3.3...might have to be rooted...
Thanks in advance.
Yea you will need a rooted phone as far as I am aware
Sent from my mobile
What about extended controls?
I think it can do the trick.
Sent from my HTC Incredible S using XDA App
Have you tried following:
Home -> Settings -> Wireless & networks -> Mobile networks(Set options for roaming, networks, APNs) -> Network Mode dropdown
My IS is not rooted(or I'm not aware of it) and it is possible to change network mode.
Hi
Just press "Phone" and enter *#*#4636#*#* under "Phone information" you can change it.
Could you indicate what you are trying to do?
Only switch between GSM & CDMA for internet usage?
Or to turn 3g/2g internet connection on-off?
Ok, sorry... It seems like I haven't explained myself right here...
OK...
I am totally aware of what options there are in the settings...but thank you none the less for pointing those out though seriously.
Currently, this is what I do to change it (Mobile Network Settings)... I wasn't saying I cant change it haha. Misunderstanding. My apologies...
I am just after a widget that does it for me basically... from...
"WCDMA/GSM Auto (or just WCDMA)" -----too---- "GSM Only" ----and vice versa...and so on...
I hope this makes sense...
Thanks again, in advance guys.
It makes perfect sense, but I don't think its possible.
gudge said:
It makes perfect sense, but I don't think its possible.
Click to expand...
Click to collapse
Hrmm, yeah I'm starting to realise that...unfortunately...
I'm still going to try some stuff. A friend suggested "Toggle 2G"...but i cant seem to find it on the market... The add on for it is there but, not that actual app...weird...
Under HTC widget, there is one for the on/off for 3G.
I don't have an on/off HTC 3G/2G toggle widget
kazprotos said:
I don't have an on/off HTC 3G/2G toggle widget
Click to expand...
Click to collapse
On the main screen, touch the personalize button.
Touch widget.
Touch Browse all HTC Widget.
By default it is number 50/71 widget.
My unmod IS have this.
The topic is about switching between 2G and 3G not switching mobile data on or off.
Thanks for your reply man. But unfortunately there's no such thing. There's a mobile data switch, which has nothing to do with GSM or wcdma.
Thanks anyway.
ltcaugust13 said:
On the main screen, touch the personalize button.
Touch widget.
Touch Browse all HTC Widget.
By default it is number 50/71 widget.
My unmod IS have this.
Click to expand...
Click to collapse
I only have 66 HTC widgets and 2g/3g is not one of them. Very strange.
I guess IS from different countries differs.
I have that widget and it works fine for me.
It does toggle between 2G/3G. Tried and Tested.
How do I go about re-enabling this option? I'd like to be able to toggle my 4g off to save battery.
Wapples said:
How do I go about re-enabling this option? I'd like to be able to toggle my 4g off to save battery.
Click to expand...
Click to collapse
This doesnt answer your question, but I too have come across this. I updated to ICS this morning and see that my Network Mode toggling is now disabled.
Anyone, pls help!
Wapples said:
How do I go about re-enabling this option? I'd like to be able to toggle my 4g off to save battery.
Click to expand...
Click to collapse
Two options on ICS:
Grab LTE On/Off (Thunderbolt) from Play Store
Dial *#*#4636#*#* on your dialer
The dialer method simply gets you one step up higher in the Testing menu; go to Phone Information.
Scroll down the page a bit to see the Radio setting; it's the dark grey on black control, right above the Turn Off radio button, that by default reads LTE/CDMW/EvDo. Change to CDMA auto (PRL)
Vereynn said:
Two options on ICS:
Grab LTE On/Off (Thunderbolt) from Play Store
Dial *#*#4636#*#* on your dialer
The dialer method simply gets you one step up higher in the Testing menu; go to Phone Information.
Scroll down the page a bit to see the Radio setting; it's the dark grey on black control, right above the Turn Off radio button, that by default reads LTE/CDMW/EvDo. Change to CDMA auto (PRL)
Click to expand...
Click to collapse
Both of your suggestions worked perfectly thank you!
hi,
I usually set wcdma only through phone info (*#*#4636#*#* fom dialer).
two days ago I change slot for my sim (to solve a bug in cm13)
and i can't set wcdma only.
maybe phone info setting works only with SIM1 ...there is any way to set wcdma only in the SIM2? with root?
i only Can set 3g with Classic menu but it's wcdma preferred.
any ideas?
filip2805 said:
hi,
I usually set wcdma only through phone info (*#*#4636#*#* fom dialer).
two days ago I change slot for my sim (to solve a bug in cm13)
and i can't set wcdma only.
maybe phone info setting works only with SIM1 ...there is any way to set wcdma only in the SIM2? with root?
i only Can set 3g with Classic menu but it's wcdma preferred.
any ideas?
Click to expand...
Click to collapse
Flash xposed -- Install gravity box -- Add the Network Mode tile to QS.
nilanko said:
Flash xposed -- Install gravity box -- Add the Network Mode tile to QS.
Click to expand...
Click to collapse
thanks, i'll try
nilanko said:
Flash xposed -- Install gravity box -- Add the Network Mode tile to QS.
Click to expand...
Click to collapse
i tried but i have installed Android n-ify module and these 2 module is in contrast for quick setting. there is an app only for this?
filip2805 said:
i tried but i have installed Android n-ify module and these 2 module is in contrast for quick setting. there is an app only for this?
Click to expand...
Click to collapse
They don't conflict with each other. I have used these two together without any problem. I could not find any app for that purpose.
filip2805 said:
hi,
I usually set wcdma only through phone info (*#*#4636#*#* fom dialer).
two days ago I change slot for my sim (to solve a bug in cm13)
and i can't set wcdma only.
maybe phone info setting works only with SIM1 ...there is any way to set wcdma only in the SIM2? with root?
i only Can set 3g with Classic menu but it's wcdma preferred.
any ideas?
Click to expand...
Click to collapse
Try a clean flash of the rom again.. Check if the issue persists..!
Sent from my Xiaomi Mi 5 using XDA Labs
I just moved new from huawei to samsung. and on huawei they always had a shortcut to switch directly to 4G only. also when long pressing on the mobile data in quickpanel it took you directly to the setting page where you can change the network mode.
On samsung software i cant seem to find any shortcut to this except to go to settings > connections > mobile networks > network mode and change from there. I dont want to keep it at automatic because sometimes i am in poor reception areas and already have wifi so i need to force it to 2g only which has better reception. (to reduce battery drain)
oae08 said:
I just moved new from huawei to samsung. and on huawei they always had a shortcut to switch directly to 4G only. also when long pressing on the mobile data in quickpanel it took you directly to the setting page where you can change the network mode.
On samsung software i cant seem to find any shortcut to this except to go to settings > connections > mobile networks > network mode and change from there. I dont want to keep it at automatic because sometimes i am in poor reception areas and already have wifi so i need to force it to 2g only which has better reception. (to reduce battery drain)
Click to expand...
Click to collapse
iam afraid , dont .... but i never switch for 3g or 2g , even bad reception . on 4g will drain battery sure coz not all area in our country well covered , u know what iam talking about , at least still have internet , and we still alive , keep on touch and pm me if u need anything.
regards from baabda
oae08 said:
I just moved new from huawei to samsung. and on huawei they always had a shortcut to switch directly to 4G only. also when long pressing on the mobile data in quickpanel it took you directly to the setting page where you can change the network mode.
On samsung software i cant seem to find any shortcut to this except to go to settings > connections > mobile networks > network mode and change from there. I dont want to keep it at automatic because sometimes i am in poor reception areas and already have wifi so i need to force it to 2g only which has better reception. (to reduce battery drain)
Click to expand...
Click to collapse
This worked for me.
Samsung Band Selection - Apps on Google Play
This app will help you access hidden network settings for forcing band selection
play.google.com
Select the "More network settings" option
tjsooley said:
This worked for me.
Samsung Band Selection - Apps on Google Play
This app will help you access hidden network settings for forcing band selection
play.google.com
Select the "More network settings" option
Click to expand...
Click to collapse
What is it supposed to do? I have tried clicking it but nothing is happening. If you can post a screenshot please.
oae08 said:
What is it supposed to do? I have tried clicking it but nothing is happening. If you can post a screenshot please.
Click to expand...
Click to collapse
I click on the button I mentioned and it brings me to a band selection screen. Might only work on the QUALCOMM version which is what I have.
Here is a screen recording I just made.
oae08 said:
I just moved new from huawei to samsung. and on huawei they always had a shortcut to switch directly to 4G only. also when long pressing on the mobile data in quickpanel it took you directly to the setting page where you can change the network mode.
On samsung software i cant seem to find any shortcut to this except to go to settings > connections > mobile networks > network mode and change from there. I dont want to keep it at automatic because sometimes i am in poor reception areas and already have wifi so i need to force it to 2g only which has better reception. (to reduce battery drain)
Click to expand...
Click to collapse
Just use Bixby routines and create a condition or a button to trigger the change to your preferred network mode.
tjsooley said:
I click on the button I mentioned and it brings me to a band selection screen. Might only work on the QUALCOMM version which is what I have.
Here is a screen recording I just made.
Click to expand...
Click to collapse
seems so. and besides it still requires you to go to the application and click the button. so i can instead click on settings and then connections and then im on the same screen. on huawei it was just 1 click to be on that screen
DaReDeViL said:
Just use Bixby routines and create a condition or a button to trigger the change to your preferred network mode.
Click to expand...
Click to collapse
I tried that, how to condition a button to trigger it? I appreciate if you could explain more please
oae08 said:
I just moved new from huawei to samsung. and on huawei they always had a shortcut to switch directly to 4G only. also when long pressing on the mobile data in quickpanel it took you directly to the setting page where you can change the network mode.
On samsung software i cant seem to find any shortcut to this except to go to settings > connections > mobile networks > network mode and change from there. I dont want to keep it at automatic because sometimes i am in poor reception areas and already have wifi so i need to force it to 2g only which has better reception. (to reduce battery drain)
Click to expand...
Click to collapse
I have set up a bixby routine to switch network modes, and you can put a button on your homepage.
Settings > Advanced Features > Bixby Routines
If Start Button Tapped
Then Network mode (select what you want)
You can also make it revert when you unclick the button
Then on the home page, long press, add widget, add a bixby routine button, select the routine you just made
oae08 said:
I tried that, how to condition a button to trigger it? I appreciate if you could explain more please
Click to expand...
Click to collapse
Sure. In the "if" condition choose "start button" then choose the action to switch to the preferred network mode. After that you can set a home screen button for the routine.
DaReDeViL said:
Sure. In the "if" condition choose "start button" then choose the action to switch to the preferred network mode. After that you can set a home screen button for the routine.
Click to expand...
Click to collapse
mtm1401 said:
I have set up a bixby routine to switch network modes, and you can put a button on your homepage.
Settings > Advanced Features > Bixby Routines
If Start Button Tapped
Then Network mode (select what you want)
You can also make it revert when you unclick the button
Then on the home page, long press, add widget, add a bixby routine button, select the routine you just made
Click to expand...
Click to collapse
Thanks guys, ok I have managed to create the scenario but I was under the impression that this button can be put in the quick toggles but I cannot find it. Where do you find the button?
I can only see it as a widget. (I am using nova launcher if it matters)
Thanks again
oae08 said:
Thanks guys, ok I have managed to create the scenario but I was under the impression that this button can be put in the quick toggles but I cannot find it. Where do you find the button?
I can only see it as a widget. (I am using nova launcher if it matters)
Thanks again
Click to expand...
Click to collapse
quick panel : only bixby routine must be on
and yes u must put the widget if u select routine work if START
carlitobahsoun said:
quick panel : only bixby routine must be on
and yes u must put the widget if u select routine work if START
Click to expand...
Click to collapse
Thanks bro, so there isn't any way to put this 'button' except as a widget in the homescreen? No way to put it for example in edge panel or quick toggles etc.. ?
oae08 said:
Thanks bro, so there isn't any way to put this 'button' except as a widget in the homescreen? No way to put it for example in edge panel or quick toggles etc.. ?
Click to expand...
Click to collapse
if i found a way will tell u , but till now not figured
There are apps I have used in the past that create shortcuts to system tasks that appear as apps, however I don't know if it's compatible with Bixby Routines. Will try at lunch and see what I can find
mtm1401 said:
There are apps I have used in the past that create shortcuts to system tasks that appear as apps, however I don't know if it's compatible with Bixby Routines. Will try at lunch and see what I can find
Click to expand...
Click to collapse
carlitobahsoun said:
if i found a way will tell u , but till now not figured
Click to expand...
Click to collapse
I have found from the galaxy store the app called widget edge that would allow you to add widgets to the edge feature.
For now this solves my problem in a way. If you think of other solutions please let me know.