Q&A for SailFishOS on the TouchPad
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for SailFishOS on the TouchPad. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Installation questions
Hello,
I want to say thank you for porting Sailfish to the HP Touchpad :good:. Soon after I saw this thread, I ordered a used device from ebay (73€). As I am now waiting for the delivery, I am preparing myself to get Sailfish to the device.
I found a guide to get CM 11 to the device on rootzwiki from "RolandDeschain79" (as I am new, I can't post links here).
In step 5b where you have to copy the CM11 files to the "ttinstall" folder of the device, what files exactly do I have to put there? I have two zip files from the first post in this thread (Cm11 and Sailfish).
Is it OK to first copy the extracted CM11 archive to the ttinstall folder and then flash android first?
How do I proceed after that?
John944S2 said:
Hello,
I want to say thank you for porting Sailfish to the HP Touchpad :good:. Soon after I saw this thread, I ordered a used device from ebay (73€). As I am now waiting for the delivery, I am preparing myself to get Sailfish to the device.
I found a guide to get CM 11 to the device on rootzwiki from "RolandDeschain79" (as I am new, I can't post links here).
In step 5b where you have to copy the CM11 files to the "ttinstall" folder of the device, what files exactly do I have to put there? I have two zip files from the first post in this thread (Cm11 and Sailfish).
Is it OK to first copy the extracted CM11 archive to the ttinstall folder and then flash android first?
How do I proceed after that?
Click to expand...
Click to collapse
TPToolBox is for installing Android only. You'll have to use the specific instructions in the Sailfish thread for anything else. I know nothing about Sailfish, so that's about all I can help you with.
shumash said:
TPToolBox is for installing Android only. You'll have to use the specific instructions in the Sailfish thread for anything else. I know nothing about Sailfish, so that's about all I can help you with.
Click to expand...
Click to collapse
OK, thank you for replying. Can you tell me, if I have to extract the zip file before copying to the folder on the device?
I still hope, someone who has done the complete procedure could answer to my questions.
John944S2 said:
OK, thank you for replying. Can you tell me, if I have to extract the zip file before copying to the folder on the device?
I still hope, someone who has done the complete procedure could answer to my questions.
Click to expand...
Click to collapse
No unzipping, leave the files as they are. That's typical for most all of the flashing you will do.
shumash said:
No unzipping, leave the files as they are. That's typical for most all of the flashing you will do.
Click to expand...
Click to collapse
Ok, thank you. That was a missing part of the puzzle for me.
I think I now have a clue how to proceed with the flashing procedure.
It's quite challenging to find all of the informations across the web to get Sailfish to the Touchpad. Since flashing an operating system to a device is always a sensible act, I don't want to do anything wrong (and eventually brick the Touchpad ).
When I have my Touchpad and everything works out OK with Sailfish, I will do a small guide for other beginners (like me).
Related
Hey guys, I would like to know how to build a. Zip like a "gapps" containing all my applications in this package. Whether it is a. Tar or via odin. Zip via CWM. Could someone point me to a program or a tutorial so I may even be studying and developing?
grateful
http://forum.xda-developers.com/showthread.php?t=1365099
http://forum.xda-developers.com/showthread.php?t=1318423
http://forum.xda-developers.com/showthread.php?t=1321268
l2r
Yes OP, please understand the issue is not your question...but that you posted it in the Development Section. I would ask that you read the Forum Rules Sir.
Moved & Thank You.
Q&A for [XXLTC] Cheese ROM (17.Sep.2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [XXLTC] Cheese ROM (17.Sep.2014). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
All Provided Links Are Malfunctioning
Every link provided to download this rom is invalid or stucks inbetween download
Please provide a different and stable link to download this awsome rom
I am so exited to try this rom but download links downs me!!!
when will air command work???
Can any 1 tel me when will air command work in cheese rom
where is link for download this rom. thanks.
Scrollable wallpaper only
@mjrifath I'm currently using Cheese rom with your multiwindow fix. I'm totaly satisfied except one little thing. I would like to have scrollable wallpaper. You have posted CheeseRom_Update_Package_v1_by_mjrifath with all updates, but could you to extract only files for this one. I could do it myself, only need explanation what exactly to do. I know it's related to SecLauncher2.apk, but I'm not quite sure will it work if I push the file to the system/app with right permissions. Thanks in advance!
super_operater said:
@mjrifath I'm currently using Cheese rom with your multiwindow fix. I'm totaly satisfied except one little thing. I would like to have scrollable wallpaper. You have posted CheeseRom_Update_Package_v1_by_mjrifath with all updates, but could you to extract only files for this one. I could do it myself, only need explanation what exactly to do. I know it's related to SecLauncher2.apk, but I'm not quite sure will it work if I push the file to the system/app with right permissions. Thanks in advance!
Click to expand...
Click to collapse
Go Here
Cheers!
question
i dont know where iam can do download this ROMS? (
somebody help me !!
Q&A for Android Lollipop port development
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Android Lollipop port development. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
CM May help
Not sure if this thread was hoping for an AOSP port, but Cyanogenmode recently posted the new CM12 branch. Its not going live in nightlies for a little while but as far as I can tell its a fully buildable branch I'm just unsure whether it'll work with the existing CM11 kernel, or if the device blobs will even function correctly on an upgrade this big.
iam in for testing android l port on my moto x XT1052 Indian version
test
Hi! How can I be a tester too ? What do I need guys ?? I have one Moto X 2013
I would love to test. I have a 2013 VZW Dev Moto X.
interested, sent you an hangouts
flash successful.
I have gotten it to flash successfully but i forgot to write down the logs (my bad) i found the issue of why it didnt flash though. Ive seen a few files sitting in the wrong place and i moved them to their original spots and I've gotten rid of that extra folder when you open the zip file and see there that leads to the other files. Once i did that, i zipped it back up and renamed it to nexus 6 port test. It took awhile but it flashed successfully. The only bad thing about it is that it cant get pass the warning bootloader unlocked screen. If you want the rom i changed, just let me know and i can upload it to mediafire when i get out of school today.
Cdiamond
Q&A for [XAP] AdBlocker For Windows Phone 8.x+
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [XAP] AdBlocker For Windows Phone 8.x+. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hmm, it's making a mess in a hosts file. There are no spaces and enters between each host entry. And you much fix theese 2 sources. That would be great! You can open app on github right now, we will commit the bugs.
I have just installed V4 in my Nokia Lumia 830 8.1 update 2 and when i start the app it suddenly stop.
Installation question
Hi. thank you for all your work! I have spent two days attempting to install this, and have read through this entire thread and many others before asking this question.
Trying to install onto 640 running 10586.36 in developer mode. I am a semi noob to windows phone. Have tried installing wppt and xap deployer 2.0 with no luck. Like I said, a noob. I don't know if I have not unlocked the phone as it should be or what. Under the impression that in win10mobile "developer mode" is unlocked. When I try to "launch" the xap it just closes right away.
If and when you have the time, if you could point me in the right direction on what I need to do to install this it would be very appreciated.
Thanks again!
[email protected]
Have you read Post 1
***YOU NEED TO BE INTEROP-UNLOCKED AND HAVE ALL CAPABILITIES UNLOCKED AS WELL!
titi66200 said:
Have you read Post 1
***YOU NEED TO BE INTEROP-UNLOCKED AND HAVE ALL CAPABILITIES UNLOCKED AS WELL!
Click to expand...
Click to collapse
Thanks for the reply. Yes I have read that, as well as all nine pages of the thread before I posted... I am trying whats in this thread right now....Let me reiterate that I am not a developer.
http://forum.xda-developers.com/win.../jailbreak-interop-unlock-windows-10-t3178140
To deploy any xap I need something like wppt, correct? Right now I am trying to install wppt but get any error saying...http://tinypic.com/r/51vfkk/9[/IMG]
So to summarize, I need to install wppt so I can deploy root_tool.xap, but getting errors in the process. Do I need visual studio installed on computer to run wppt? I am not a developer. Just a windows phone noob who doesn't want ads. I am fairly proficient in the desktop environment, not at all with mobile.
Thanks for all your help, it is not taken for granted. Much appreciated. Cheers.
Q&A for [5.1.1]Echoe_Rom_Tmobile
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [5.1.1]Echoe_Rom_Tmobile. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Wi-Fi calling does not work
I like this rom and am having fun playing around with it, but Wi-Fi Calling fails to start. This has occurred in all three versions. It works for me on stock roms and Infamous roms, as well as, Darthstalker, so I don't believe it's my device, but I do want to thank you for all your hard work and getting this rom and the updates out to us so fast. Thanks!:good:
Getting that too!
Seems that there is several seconds before the rest of the OS catches up after reboot as the screen tends to go black for me, then my wallpaper finally appears followed by a few more seconds and the rest of my icons appearing.
Ad blocker
i love this Rom but im missing "youtube adblocker" and yes i know exposed isnt working at the moment so does anybody know of another way to block ads on youtube?
COG 2
This rom can be flashed over COG 2, correct ?
re: new rom
Megamachine said:
This rom can be flashed over COG 2, correct ?
Click to expand...
Click to collapse
Since the rom is based on the new 5.1.1 firmware you need to odin
flash the modem.bin and the hlos.bin files before flashing the rom.
You can find both of those files in the OP of the link below:
http://forum.xda-developers.com/note...obile-t3179619
Be sure to make a nandroid backup before doing anything else.
Be sure to do a full wipe including a factory reset in twrp before
flashing the zip file rom. (no need to wipe the internal sdcard)
Good luck,
Have a great day!