Related
Hello all... I'm new to this forum but have found it quite helpful in my quest to optimize and get every bit of juice out of my HD2. I have looked through so many posts trying to find information on stands as I have just purchased my apple bluetooth keyboard for use as a note taking device at school. I was going to buy another eeepc after I sold mine, but realized that with the keyboard this baby is actually quite powerful enough to be a baby computer at school. A lot of the stands seem really cool but I was wondering if anyone had found or figured out a way to modify a stand that could securely clip onto the space at the top of the apple keyboard.
Attached is a link to an image of the keyboard to give you an idea of what I'm working with. Seems the space at the top is about an inch. As I can't seem to find one I can buy yet, I've been trying to think of ways I could create a clip on from one of the stands like the smart stand but thought I'd throw this out to you guys for some ideas as I'm not getting very far. Sorry if this has been covered before, but I did do a lot of searching and didn't seem to find anything like this in particular so thought I'd post.
And, btw, I'm Elle. Nice to meet you guys.
Cool idea...let us know if you figure something out.
The whole concept just sounds strange to me. Using a small phone with a massive keyboard just to do some notes. Granted both devices are beautiful but working them both together, er no.
However each to their own and all. I can't think of a way to attach them together which wouldn't inherently ruin either the phone or keyoard but what I'd do if I was so inclined to use them both together, would be maybe buy the extended battery with kickstand and then use it like the image below (obviously you wouldn't need to lean your phone against the wall with the kickstand ).
I fail to see why the HD2 needs to be attached to the keyboard in the first place .
Update - my girlfriend has suggested you just use a bit of blu-tac lol.
That's what I've been doing, just without an appropriate stand but a self-created one. It's actually a rather cool setup; this is the smaller version of the keyboard and it decreases the weight I carry around immensely. The keyboard syncs wonderfully, I just thought it might be cool if there was a way to attach it to the keyboard. I'll let you guys know if I figure anything out specifically, there seems to be some interesting ways to manufacture a simple clip on that I'm figuring out the details for at the moment.
Did you ever figure out a simple stand? I just bought one of these keyboards. and it paired perfectly and all the keys work, except the specialized function keys.
Compared to other available bluetooth keyboards (Stowaway, Freedom, etc.), this one is probably overall less space (by volume) and lighter.
Cheers
Capdase stand
hi. Just to let you know that this stand actually works.
Alright, ignoring the iPhone (it sux anyways. ), the translucent stand thats holding the phone actually fits the hd2. Not only that, I have the silicon casing around the hd2 and the stand still fits! Of course, it stretches as the iphone is of a smaller width. How do i know? I tested my bro's stand and it has been with me since. Lets just say that the holder was no longer meant for the iphone due to the bigger hd2. I.e. Its mine!
P.s It goes horizontal and vertical.
There's a couple of threads on make-your-own stands My favourite is the credit-card one, which you then fold out whenever you need it. Keep it in your wallet/as part of your phone case and you're there!
http://forum.xda-developers.com/showthread.php?t=603363
iPhone stand
CCheck out this one: w w w. northsecure. com/iphone-stand/ (remove spaces)
Old thread, but anyway the extended battery with it's kickstand would do this amazingly
Hey everybody!
I go by Tactus Texas over at notioninkhacks.com and I am an electronics manufacturer and an Adam enthusiast. I have the capability to produce cases with my manufacturing partners but I want to get the communities input first before I take anything to production.
What do you want in a case for your Adam? My current idea is that of a "second skin" a thin and light hard case that will be always on your adam and will cover everything while leaving access to ports, the camera, and the display/buttons. I want to be clear your input is going towards a real product that I hope to bring to market within the next few weeks provided we manage to get Notions blessing to go ahead.
Chime in and have your say as to what it should be, if anything, this project will only happen with community support!
- TactusTexas
If you interested in being put on this list to be notified when pre orders start go to the notion ink hacks website and look under the accessory section and submit your information!
I'm expecting my NI very soon and as a casing I think I would opt for something of a hard leather casing I could fold open as a book, interface ports available of course and easy to slide out to show of in full and home usage.
two types of cases i really enjoy are:
1. leather case that can be used as a stand too like this:
http://www.amazon.com/Cyber-Acoustics-IC-1000BK-Leather-Cover/dp/B0042BVSF4/ref=sr_1_7?ie=UTF8&qid=1295661437&sr=8-7
if you could make a magnetic strip that run from top to bottom or left to right to latch it close that would be fantastic
2. Or a soft gel like this one
http://www.amazon.com/Amzer-Argyle-Gloss-Samsung-Google/dp/B004FPZBSC/ref=sr_1_35?ie=UTF8&qid=1295661879&sr=8-35
hate the hard shell pastic cases.
whatever the skin, it should be thin and easy to grip
I like the leather case idea with folding cover like a book. I also like the hard case idea. I currently have a seidio rugged case on my incredible, I like the protection a hard case provides. Maybe a hard case with a leather folding cover. Put me on the pre-order list please.
edit: meant to write "pre-order list" not "protest list", damn auto-correct
Sent from my ADR6300 using XDA App
Edit: Nevermind.
Good stuff.
Notion ink case idea
ksidirt said:
Edit: Nevermind.
Good stuff.
Click to expand...
Click to collapse
I want a leather case that will hold a keyboard or a pocket for a small foldable bluetooth keybard.
Hey guys, sorry for my absence here I've been around on NIH and Notion Addicts working with the community on the case! We are now preparing our first prototypes, we weren't able to go with leather (right away) but we are working on solutions for that as well! You can expect to see some shots of it by the end of the week I think you guys will definitely like it!
We will also be producing color strips here very shortly!
Love the idea and agree with what you want. I would add some protection for the camera though. Maybe a Velcro strap or strip that can be removed or folded back.
Sent from my PC36100 using XDA App
Hey guys,
Tactus Texas here with more good news today on the Project Stealth front! So many people have been asking when is it coming, what does it look like etc and while I can't answer all your questions I can at the very least tell you guys that we are working at full steam to get this done for everyone. Starting a new project of this scale is hard work but those of us here at NIH and our manufacturing partners are working very quickly to get things ready. We took a slight change in our internal goals for the product, we want it to be as sleek and stylish as possible but our secondary goal is to make it as rugged as possible.
With this in mind you will see a final design that cradles your adam in a soft silicon but surounds it in a very hard plastic so you get shock absorption and a sturdy exterior to defend against the bumps and bruises of every day life. You will also have the option of using a removable screen cover that you can clip to the front of the device with ease as you throw it into a bag without worrying that your screen won't come out the other side. You can also expect a great integrated kickstand as well!
In short we are doing everything we can to get this product to our fellow adamites as we've been called as soon as possible. You can expect to see official renders here at NIH and you can rest assured you will be able to see review units in the hands of your favorite Notion fan sites before you have to bite the bullet and pull the trigger on an order.
Stay tuned, more info will begin to come in at a faster rate, also stay tuned for Project Stealth to evolve into a line of Notion Ink products to cover all of your needs to make this great device even better.
Thanks everyone, keep spreading the word, it is the community that will decide if we go to full production!
- Tactus Texas
On a secondary note how would you guys feel about an extended battery as well? And also any particular favorites for color strips?
Red
Sent from my ADR6300 using XDA App
Tactustexas said:
On a secondary note how would you guys feel about an extended battery as well? And also any particular favorites for color strips?
Click to expand...
Click to collapse
If the thing really lasts 10+ hours, I don't see my self wanting to carry around the extra weight of an extended battery (at least not directly in a case).
joshua.lyon said:
If the thing really lasts 10+ hours, I don't see my self wanting to carry around the extra weight of an extended battery (at least not directly in a case).
Click to expand...
Click to collapse
Thats one of the things we have tried to take into consideration, we do think that there are power users who are planning to use this device in an outdoor environment for long periods of time without access to a charge, that's what we are going for on creating an extended battery solution. We do know that option won't appeal to many users so we are keeping that as an R&D for now. For now what we are working on wont actually be integrated into a case, it would ship as an extension for the existing battery compartment but in a way that wouldn't disrupt the unique grip of the adam.
I appreciate all the feedback here and around the web so keep it coming, we really are listening!
I would like a leather case. with a folding design that acts as a stand. and an integrated bluetooth keyboard. Ive seen this design before for an ipad in Brookstones gadget store in my local mall.
Hey number01pup, we won't be launching with leather or keyboard at launch but rest assured we are working on it! I hope to be able to announce something on that front in the coming month. If not leather a keyboard equipped case is definitely in the works.
charger/extra battery for adam
I would be interested in this kind of charger/extra battery, which would store electricity into normal AA cells. Solar panel would be nice too since I like to take my laptop with me when I go cycling for longer trips.
Unfortunately I can't post a link here because I'm a new user but if you add the www and the dots this is what the url looks like:
mark-ju net/bike_ride/equipment/charger htm
Does anyone know if such products are commercially available?
It would be ideal for my adam.
Battery life
people over at notionaddicts are not reporting anything near 10 hours of battery life. So extended or better quality batteries might be in demand.
Hate the hard shell cases. Something with leather would be good.
Some color or texture that you can use in the sun.
I know that right now most of you do not have this problem, but this summer you will. Flat black, or shiny, in the sun gets hotter than he__! Just today in Florida after an hour I could barely hold my Lenovo/Pixel Qi netbook and could not even think about using the touch pad.
Hello,
I'm looking for a stand like this one only made out of plastic and that could be folded. If you seen something like this or you know there's none for sure please let me know. I might model one in Pro/E (modeling software) and try to find someone who can make it.
Thanks,
Moav
A nice find
Sadly its the first i have ever seen, you could shape one from wire, but it won't be foldable
The Scan Dock version (on the website) looks better and is collaspible, have a closer look, it might fit your needs, simple as well to fabricate this from ply. plastic or almuminum would be very simple
Couple of reason why it won't fit my needs. First, I'd need to fabricate it myself, and the one in the picture looks fragile enough, so my handy-work won't be so tough. And the other thing is I really want something that folds so I won't have to build it every time.
Do you think a plastic folding stand such as this but professionally made would sell ? As a student I find myself copying quite allot with the camera to a PDF, and if it could be folded nicely in the bag it would be ideal. As a Mechanical Eng. student I could quite easily model such a thing but I'd need to manufacture allot for it to be cheap.
Mmm not too hard to fabricate, I am a mechanical engineer & could do this quite easily from plastic or alloy as a flat packing design.
Do not need one myself but as a Mech Eng student it would be a good little project if you do have some practical skill & workshop resources. Have a go ...
Update :
Another option for the scanner on the travel is the "Kickstart". You can find all the info here
moav said:
Update :
Another option for the scanner on the travel is the "Kickstart". You can find all the info here
Click to expand...
Click to collapse
Alternatively, if you run Android on your HD2, download Camscanner from the market.
It reshapes and resizes almost perfect every time, and converts to PDF for sending saving etc
Anyone replace out your strap/band yet? How does it look?
Sent from my Nexus 9 using Forum Fiend v1.3.3.
Yep, hated the stock band. I purchased this one... http://www.amazon.com/gp/product/B001EYVBJA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Super quick review... Matches the watch like it was built for it. I've had this brand before and it held up well which isn't surprising, it feels like a piece of decent quality. Quicker to take on and off and less likely to drop your watch which is true all of straps of this type versus a buckle. Regrets = zero.
Sweet! I just ordered one too....
Sent from my SM-G925T using XDA Free mobile app
krabman said:
Yep, hated the stock band. I purchased this one... http://www.amazon.com/gp/product/B001EYVBJA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Super quick review... Matches the watch like it was built for it. I've had this brand before and it held up well which isn't surprising, it feels like a piece of decent quality. Quicker to take on and off and less likely to drop your watch which is true all of straps of this type versus a buckle. Regrets = zero.
Click to expand...
Click to collapse
I wonder if they make that one in the rose gold that matches the gold Urbane. I will have to look into that...
I purchased these 2:
DASSARI Concord Black w/ White Stitching Croc Leather watch Band for BREITLING 22/20 22mm https://www.amazon.com/dp/B00OC77BR2/ref=cm_sw_r_awd_Ctssvb0JQAJAR
Ritche 22mm Stainless Steel Bracelet Watch Band Strap Curved End Solid Links Color Silver https://www.amazon.com/dp/B00DKYC93E/ref=cm_sw_r_awd_fvssvb1V69QNZ
TriadX1 said:
I wonder if they make that one in the rose gold that matches the gold Urbane. I will have to look into that...
Click to expand...
Click to collapse
Its much easier to match up the stainless than various gold, rose, graphite, ti, etc. bands/straps/bracelets. I would consider taking it to a larger shop where they have a good inventory and try to match it up.
http://www.amazon.com/gp/product/B005K2R4IO/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 This was the wand band I ordered when I bought the watch. It matches the watch perfectly. I attached some pictures below.
I am curious about how you charge the watch with a metal band. Could someone please post a picture of your watch on the stock charger to show how you do it?
just ordered this
Hadley Roma 18-22mm Squeeze End Link Men's Deployant Stainless Metal Watch Band
http://www.ebay.com/itm/371296668278
JimSmith94 said:
I am curious about how you charge the watch with a metal band. Could someone please post a picture of your watch on the stock charger to show how you do it?
Click to expand...
Click to collapse
The magnet is strong enough to hold the charger to the phone in most any position including the watch laying on its side. You can do it however you want.
Got the SUPER engineer Type II based on reviews
Amazon item B00CSE7IJ2
I know it seems like it's a bit pricey compared to others like the Hadley Roma but I'm super impressed with the quality. It's very heavy and the edges are not rounded over like it was mass produced. The links that can be removed for sizing have screws and they are super easy to adjust. I also like the buttons on the flip part of the band closure.
$72 bucks is still a hell of a lot cheaper than those rip off apple metal bands. Can't imagine them being any higher quality than this.
Important note: the 2.5mm fat boy pins that come with this larger band do not fit into the body of the LG Urbane because the lugs or tips are 0.8mm instead of the tiny ones that came on the existing leather strap band. For now, I'm using the pins that came with the watch, which are standard 22mm, but with smaller lugs. I could not find another vendor who made a 2.5mm pin with smaller tips since these larger bands are designed to go on Seiko's or diving watches.
Update: My plan is to put the fat boy pins that came with the watch in my dremel and use a micro diamond file ($13 on amazon) to reduce the lug down to a diameter that works in the Urbane. I will post an update if it works out and post links to the files I bought. Don't see why it wouldn't work and I don't think there is any other choice if you want to utilize the fat boy pins...which I do.
Stay tuned...pics coming.
Peter
ptchan5, could you explain in greater detail the Fatboy 2.5mm lug and LGs .8mm tips?
Keep us posted in the project
Anyone here thinking of going with a dark brown aligator band with the silver watch?
I would love to here what you guys think... or am I the only one not going with the metal braclet.
why_999 said:
Anyone here thinking of going with a dark brown aligator band with the silver watch?
I would love to here what you guys think... or am I the only one not going with the metal braclet.
Click to expand...
Click to collapse
I like this also.
Metal bands are not my thing.
Fat boy 22mm Spring Pins MOD
This is a follow-up to my previous post.
I used a dremel to reduce the diameter of the lugs on the 2.5mm fat boy spring pins that come with the heavy diver watch metal bands. I searched high and low and I believe all the thick spring pins come with 0.8-1.0mm lugs at the tips which are too big for the body of the LG Urbane. Turns out the pins that come with the Urbane are actually smaller than the holes in the watch body, but the fat boy pins are just a wee bit too large.
This MOD took about 5-8 minutes to do and worked perfectly! Now you can use the spring pins that were supposed to go with the larger metal band.
All you need to do is insert the spring pin into the dremel about half way and turn the dremel on to low setting. I bought the cheapest set of micro files I could find on Amazon Prime for $14 bucks and I ended up only using a single file out of the set. The one I used was the 90 degree square one so I could easily just hold it up to the lug for a minute or two and moved it forward and backward while watching the lug leave metal residue on the file. The 316L stainless steel pins are not soft metal! So it's nearly impossible to mess this one up. Once I got the pins to be reduced down in size visually I tested them in the watch before proceeding to do the rest of the pin ends.
Again, don't waste your time searching ebay or Amazon for 2.5mm pins with smaller lug pins. They don't exist. Besides by the time you buy them and find out they don't work you could have owned a nice set of micro files and been done with the MOD on the original pins that shipped with the watch band.
Very happy with the results. Ping me if none of this makes sense. Enjoy!
** Apparently can't post the pics, so ping me and I'll email them to you; maybe someone else can post them for me **
I think I'm going to go with this one
http://www.amazon.com/gp/aw/d/B00RF...olid=3U4N5O4C10O74&coliid=I34CDQ7SASFQ76&vs=1
graffixnyc said:
I think I'm going to go with this one
http://www.amazon.com/gp/aw/d/B00RF...olid=3U4N5O4C10O74&coliid=I34CDQ7SASFQ76&vs=1
Click to expand...
Click to collapse
That one has the cutout for the Moto 360. You don't need that for the Urbane.
JimSmith94 said:
That one has the cutout for the Moto 360. You don't need that for the Urbane.
Click to expand...
Click to collapse
That's not a factor for me. I'm getting that one because I liked the design best. I'm sure it would fit the urbane just fine.
I'm not much of a watch geek and have never paid too much attention to what strap I'm using. I used a NATO strap with my Pebble and the original straps with both my Pebble Steel and LG G Watch R.
However, I keep reading how uncomfortable the Urbane's strap is and it got me thinking: could I use the one in the Watch R with the Urbane? I find that one pretty comfortable.
Gorgeous!
Finally received my new metal bracelet and it beats anything I have ever seen, it really makes my watch look fair superior than even an apple watch
Hey xda members, we at Artifex Design have developed a new way to charge your urbane watches. We plan on creating the same solution for the urbane as we did for the huawei watch. The stand will look very similar to our huawei stand ( see attached pics). We plan on releasing this stand within a week or so. Our reviews of our huawei stand have been nothing but fantastic! The stand also includes an microfiber pad to protect the hanging band and rubber feet to prevent it from sliding. We will be adding pictures of the actual stand in about a week. If you would like to pre order please email us at , the preorders will run 21 USD which includes shipping. Regular price is scheduled it run at 24USD without shipping. Looking foward to hearing some feedback from the LG community!
mod edit
That awesome i have been looking for a nice looking stand for my watch for my desk at work and they are a little hard to found. So count me in for one please but is there a way to get green for android? if not thats cool ill take black
advertisements are not allowed on xda
thread closed