Hi everyone! I've built a recovery named TWRP for Samsung Galaxy Trend Lite S7390 or S7392! And if we have any Cyanogenmod version of CM11 and newer than it, you can flash it using this recovery thanks to being enabled of SELinux!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What’s new in 2.8.6.0:
TWRP 2.8.6.0 is out now for all currently supported devices.
Fix daylight savings time rules for USA and Europe (_that)
Allow mulitple overlays for popup boxes (Dees_Troy)
Add pattern style password entry for decrypt (Tassadar)
Keyboard improvements (_that)
Update AOSP base to 5.1 (Dees_Troy)
Reduce theme count to 5 and rely on scaling (Dees_Troy)
Various scaling improvements (Dees_Troy)
Improved handling of resources in the GUI (_that)
Make scroll bar size proportional to list size (_that)
Allow scoll lists to render without a header (_that)
Make console scroll per pixel with kinetic scrolling (_that)
Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
CHANGELOG
2015.05.17
initial release
BUGS
No bugs
If it's you tell me!
DOWNLOAD
Thanks to:
Samsung for device
Team Win Recovery for recovery sourcecode
Thread to discuss about our devices
XDA:DevDB Information
TWRP 2.8.6.0 for the Galaxy Trend Lite, App for the Android General
Contributors
fbli_41
Source Code: http://github.com/fbli41/android_device_samsung_kylevess
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2015-05-17
Created 2015-08-04
Last Updated 2017-12-04
Ones again great work !!
Really cool fam!!
Wich one to use? Because the stable one is the 2015-05-17 version right?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ca110 said:
Wich one to use? Because the stable one is the 2015-05-17 version right?
Click to expand...
Click to collapse
Both are stable but i suggested #1 2015-05-17 to flash CyanogenMod 11
twrp 2.8.6.0 release # 1
anybody checked simulation action twrp 2.8.6.0 , how it work?
i did many backups of system, but only two of them work
don't know where is error
trouble with odin?
hi, love your work, i've been using fancy lite and was so happy to see that you built cm11
I'm trying to flash twrp 2.8.6.0 via Odin3 v3.10 onto my galaxy trend lite, but when i select start, it gets stuck at <ID:0/005> recovery.img for ages. Its been half an hour since i decided to post this.
i had disabled the auto reboot and F. reset time, as various threads had sugguested.
side note, auto start set to "-" could this be the problem?
same thing happened with earlier versions of odin
thanks in advance :good:
Munya8 said:
hi, love your work, i've been using fancy lite and was so happy to see that you built cm11
I'm trying to flash twrp 2.8.6.0 via Odin3 v3.10 onto my galaxy trend lite, but when i select start, it gets stuck at <ID:0/005> recovery.img for ages. Its been half an hour since i decided to post this.
i had disabled the auto reboot and F. reset time, as various threads had sugguested.
side note, auto start set to "-" could this be the problem?
same thing happened with earlier versions of odin
thanks in advance :good:
Click to expand...
Click to collapse
via ODIN you must to flash .tar file
twrp 2.8.6.0 release # 1
backup system cm 11 BETA2 with verify md 5( before change kernel), all was ok, but when i wanted to restore system it's wrote md5 does not match...nothing can't to do... it's not first backup, also was few time...
amiro13 said:
via ODIN you must to flash .tar file
Click to expand...
Click to collapse
You mean twrp-2860_kylevess.tar?
that is what I've been using and it is not working :crying:
another side note, i opened the .tar file with 7-zip and i found a recovery.img file is that correct?
thanks again in advance
Munya8 said:
You mean twrp-2860_kylevess.tar?
that is what I've been using and it is not working :crying:
another side note, i opened the .tar file with 7-zip and i found a recovery.img file is that correct?
thanks again in advance
Click to expand...
Click to collapse
via ODIN flash CWM v6.0.1.5 .tar file
via CWM flash TWRP recovery.img
it's all
amiro13 said:
via ODIN flash CWM v6.0.1.5 .tar file
via CWM flash TWRP recovery.img
it's all
Click to expand...
Click to collapse
thanks a bunch, ill try it out tomorrow though
worked
Munya8 said:
thanks a bunch, ill try it out tomorrow though
Click to expand...
Click to collapse
Managed to flash the CWM img with rashr, then flash the twrp zip :good:
Just note the current version of rashr, 2.3.5, doesnt work at all, so use an older version if you want to use this method
thanks again
Munya8 said:
Managed to flash the CWM img with rashr, then flash the twrp zip :good:
Just note the current version of rashr, 2.3.5, doesnt work at all, so use an older version if you want to use this method
thanks again
Click to expand...
Click to collapse
With the latest one (2.3.6) of Rashr doesn't work. I use 2.3.4 and works perfectly. thanks
First flash cwm.img then twrp.zip
Ca110 said:
With the latest one (2.3.6) of Rashr doesn't work. I use 2.3.4 and works perfectly. thanks
First flash cwm.img then twrp.zip
Click to expand...
Click to collapse
well. I've tried with cmw also. download with odin was ok, but starting in restore mode always show the standard menu. have you got any tips for me?
aldolo said:
well. I've tried with cmw also. download with odin was ok, but starting in restore mode always show the standard menu. have you got any tips for me?
Click to expand...
Click to collapse
Check the f.a.q. s in my CM11 thread.
kadjarT said:
Check the f.a.q. s in my CM11 thread.
Click to expand...
Click to collapse
i've done a simple root. too scary to go deeper with the mod.
the trick is to switch off the phone after loading cwm or twrp and on again, with volumeUp/Home/Power, without the "auto reboot" option.
thank you for support.
aldolo said:
i've done a simple root. too scary to go deeper with the mod.
the trick is to switch off the phone after loading cwm or twrp and on again, with volumeUp/Home/Power, without the "auto reboot" option.
thank you for support.
Click to expand...
Click to collapse
You're welcome.
Is it necessary to unlock the bootloader if I wanna flash twrp, fancy lite and kadjar kernel? Also thank you for your work, it's hard to find something for these low-end devices.
UppGr4de said:
Is it necessary to unlock the bootloader if I wanna flash twrp, fancy lite and kadjar kernel? Also thank you for your work, it's hard to find something for these low-end devices.
Click to expand...
Click to collapse
We haven't got bootloader on our devices. So you don't need it. Kadjar kernel is only for Kitkat based roms, it won't work on stock rom.
You're welcome.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. Hard. A lot
Unlocking Bootloader/Root/Recovery (Required)
Just follow steps from Sony Developer World Mobile
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
1 - Make sure you have a Recovery pre-installed (via boot partition or bootstrap hack) and Bootloader Unlocked
2 - Download the latest version
3 - Flash it via your recovery
Now you ask "i still have the CWM Philz, what to do?"
You will need a custom kernel with support to load recovery from FOTAKernel, check this
For now only one Custom Kernel support it, the FalconSS Kernel
4 - Flash FalconSSKernel or any other Kernel with this support via recovery
5 - And Enjoy!!!
TWRP3 - Support from Stock KitKat to CM14.1 Based- Zip Flashable - https://www.androidfilehost.com/?fid=457095661767133664
Support: All Xperia E1 Variants
How to get into recovery: The LEDs will flash green, in this moment you can press Volume buttons and wait, you will see a Blue/Cyan color in LEDs, you will enter iin recovery.[/B]
No issues related to TWRP3 (If you found someone, just report. Thanks!)
https://github.com/TeamVee-SS
Great work
nvt992 said:
Great work
Click to expand...
Click to collapse
Thanks
Caio99BR said:
Thanks
Click to expand...
Click to collapse
why only 2.8.1?
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
why only 2.8.1?
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
We need to get CM11 working, so TWRP of Android KK branch, after get this working we will go to CM12.1 and TWRP of Android LP Branch and by last TWRP3 of MM branch.
Understand?
The device tree?
GITHUB?
porcha18 said:
The device tree?
GITHUB?
Click to expand...
Click to collapse
Oh sorry, i will update thread.
Wtf? I can't boot into 3.x... I have 2.8 (R1) installed, the. zip doesn't work and the image file in Rasher won't work either. I have FalconSS kernel installed, (of course) TWRP 2.8 and Sony Xperia E1 Stock Lite but I cannot get this to work. Fastboot I'm also having problems with; the drivers are being a fricken pain in the ass rn... If someone could link me the offical drivers that would be awesome thanks
xeonyt12 said:
Wtf? I can't boot into 3.x... I have 2.8 (R1) installed, the. zip doesn't work and the image file in Rasher won't work either. I have FalconSS kernel installed, (of course) TWRP 2.8 and Sony Xperia E1 Stock Lite but I cannot get this to work. Fastboot I'm also having problems with; the drivers are being a fricken pain in the ass rn... If someone could link me the offical drivers that would be awesome thanks
Click to expand...
Click to collapse
In Flashtool you can find Shuang (MSM8210/MSM8610) drivers, and also Sony generic drivers that will work
Kizoky said:
In Flashtool you can find Shuang (MSM8210/MSM8610) drivers, and also Sony generic drivers that will work
Click to expand...
Click to collapse
@Kizoky For some reason, those drivers won't install... it just says 'Drivers Failed to install'; no error code or anything.... idk anymore
Wow TWRP 3.0:victory:
You're one of the best dev of this forum thank you bro :highfive:
EDIT : erm, big fail, i forgot to wipe chache/dalvik any idea to get out of this situation ? Bc now twrp 3.0 won't boot
MrGunBest said:
Wow TWRP 3.0:victory:
You're one of the best dev of this forum thank you bro :highfive:
EDIT : erm, big fail, i forgot to wipe chache/dalvik any idea to get out of this situation ? Bc now twrp 3.0 won't boot
Click to expand...
Click to collapse
I will try to fix it, sorry, i said it is in wip, the recovery works but not pass of TeamWin screen, why idk.
Caio99BR said:
I will try to fix it, sorry, i said it is in wip, the recovery works but not pass of TeamWin screen, why idk.
Click to expand...
Click to collapse
NP bro'
everybody do some fails, but i'm sure you'll make it boot:fingers-crossed:
btw guys do you have 2 recoveries ,cwm and twrp ,too?
sad2kac said:
btw guys do you have 2 recoveries ,cwm and twrp ,too?
Click to expand...
Click to collapse
Actualy, the dual recovery exploit, use the bootstrap folder into the root of the storage to boot a recovery without having a UB, then if you want a PhilZ and TWRP, you unlock your BL, flash TWRP 2.8, Caio kernel AND THEN you have dual recovery
Ok, so far I got TWRP flashed, but the problem is it shows the TWRP start logo, but doesn't boot to the UI/Options. I waited for 15 minutes and it didn't boot. Hope this can get fixed
xeonyt12 said:
Ok, so far I got TWRP flashed, but the problem is it shows the TWRP start logo, but doesn't boot to the UI/Options. I waited for 15 minutes and it didn't boot. Hope this can get fixed
Click to expand...
Click to collapse
As he said, he havn't tested the recovery
Tested on R0r2 FalconSS Kernel, TWRP 3.0 Passed on Recovery but not on UI/Option on Xperia E1 (D2005). Hope it can be fixed. Good work though.
TWRP 2.8.1.0 R2 is on!
Fixed font size
Fixed device set
Partially fixed mtp
Removed default max brightness
I think so
Not is really NEED to update, but is more good than the previous release
You still need FalconSSKernel or kernel compatible with load FOTAKernel ramdisk
Caio99BR said:
TWRP 2.8.1.0 R2 is on!
Fixed font size
Fixed device set
Partially fixed mtp
Removed default max brightness
I think so
Not is really NEED to update, but is more good than the previous release
You still need FalconSSKernel or kernel compatible with load FOTAKernel ramdisk
Click to expand...
Click to collapse
Does this include the new kernel compression stuff?
USE THE NEWER Version Here :
http://forum.xda-developers.com/lenovo-a3000/orig-development/rom-lenovo-a3000-h-aosp-4-4-2-t3414278
This is Pure Android 4.4.2 with a little changes to make it more beautiful....
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version). Before flashing, please make sure to be on Stock 4.2.1 a3000_prc_3gfull and use CWM or TWRP recovery. (All you need...below)
Code:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
-Real ANDROID 4.4.2 and kernel version 3.4.67
-All apps is Pure..
-some changes like Wallpaper and icons to have more beauty.
-All google apps is included
-Camera is full working (google camera)
-No storage bugs
-Pre-Rooted
-ART works fine
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BUGs:
No Bugs...but there is some issue in rotation (you can fix by Xposed)
You may till me if you found something else.
Download & Install
look below...
CREDITs
•XDA Developers
•4pda Developers
•kupyxa4444
XDAevDB Information
4.4.2 AOSP for the Lenovo A3000-H, ROM for the Lenovo A3000
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status:Stable
Download :
Rom : http://www.mediafire.com/download/zcdre3rualsyh6x/AOSP442.zip
TWRP: http://www.mediafire.com/download/ufxg3rkveth3cui/TWRP_recovery.zip
Stock Frimware : https://www.mediafire.com/download/0cayc8cycad0z53
Tweak to Resize Storage : http://www.mediafire.com/download/yectd3deic7gdqh/EBRtweak.zip
install
-be sure that you on AOSP 4.2.1 a3000_prc_3gfull
-Download TWRP and Flash it Using SP_Flash_Tool
-Download Rom Zip and flash it by Recovery
Note: if you want to change internal storage you can use Tweak I have attached above.
*Run EBRtweak.exe
*Select size you want
*flash New ERB1 & ERB2 by SP_Flash_Tool
thank you.......
is SD card=Internal Storage because it make my device slowly??
is ART work really??
Happy-Droid said:
thank you.......
is SD card=Internal Storage because it make my device slowly??
is ART work really??
Click to expand...
Click to collapse
No SD card=SD card and internal=internal
and ART working fine, if you have problem with it tell me
nice work...thanks
Great Rom...everything work perfect.
Hesham Sleem, gladto see one more stable Rom for MTK6589. I know, this is a A3000 thread. I would like to ask, how difficult would it be to bring it on Lenovo S6000-H? Both devices are similar to each other. As I know, the screen size is different.
Thank you for reply.
Hans_Werner
it shows an error not all images are found
first time install rom
hi , i have problem here i install a rom on my a3000 now the sim is not working , and i can't fix it > plz is there video to help me install this rom on my tab and make it work right ???
Hans_Werner said:
Hesham Sleem, gladto see one more stable Rom for MTK6589. I know, this is a A3000 thread. I would like to ask, how difficult would it be to bring it on Lenovo S6000-H? Both devices are similar to each other. As I know, the screen size is different.
Thank you for reply.
Hans_Werner
Click to expand...
Click to collapse
it may be easy because the two devices have same chipset...you may have problem with screen size.
karim600 said:
hi , i have problem here i install a rom on my a3000 now the sim is not working , and i can't fix it > plz is there video to help me install this rom on my tab and make it work right ???
Click to expand...
Click to collapse
try to reflash your modem...if you still have the problem tell me
How difficult would it be for someone with no porting skills? I don't know how to start. I am looking forward to get a newer android version.
Gesendet von meinem D6503 mit Tapatalk
I get an Error when installing it from the recovery mode by TWRP
*Skipping MD5 check: no MD5 fil found.
*Warning: No file_contexts
*symlink: some symlinks failed
*E :Error executing updater binary in zip ' /sdcard/Android OS/AOSP442.zip'
*Updating partition details...
Then it stops and I can choose to (Wip Cache/Dalvik) or (Home) or (Reboot System)
So what to do please help me
yousif amr said:
I get an Error when installing it from the recovery mode by TWRP
*Skipping MD5 check: no MD5 fil found.
*Warning: No file_contexts
*symlink: some symlinks failed
*E :Error executing updater binary in zip ' /sdcard/Android OS/AOSP442.zip'
*Updating partition details...
Then it stops and I can choose to (Wip Cache/Dalvik) or (Home) or (Reboot System)
So what to do please help me
Click to expand...
Click to collapse
OK.. First please be sure you have flashed the TWRP Recovery i have attached in post #2 and put the Rom zip file in the root of SD card not in any folder.. and try again
[/COLOR]
Hesham Sleem said:
OK.. First please be sure you have flashed the TWRP Recovery i have attached in post #2 and put the Rom zip file in the root of SD card not in any folder.. and try again
Click to expand...
Click to collapse
I had flashed the TWRP by an app named Flashify on the playstore.
And I copied the ZIP file to the Sdcard not in a folder and still have the errors
---------- Post added at 02:06 PM ---------- Previous post was at 01:24 PM ----------
yousif amr said:
[/COLOR]
I had flashed the TWRP by an app named Flashify on the playstore.
And I copied the ZIP file to the Sdcard not in a folder and still have the errors
Click to expand...
Click to collapse
Now it can't boot and when I connect it to the charger I only see the Lenovo Logo and it stucks on it...
please help me ASAP...
Hesham Sleem said:
No Bugs...but there is some issue in rotation (you can fix by Xposed)
Click to expand...
Click to collapse
Could you write something more about this? What is exactly the problem? Which Xposed module/s should I install to fix it?
Thanks in advance
yousif amr said:
[/COLOR]
I had flashed the TWRP by an app named Flashify on the playstore.
And I copied the ZIP file to the Sdcard not in a folder and still have the errors
---------- Post added at 02:06 PM ---------- Previous post was at 01:24 PM ----------
Now it can't boot and when I connect it to the charger I only see the Lenovo Logo and it stucks on it...
please help me ASAP...
Click to expand...
Click to collapse
My tablet got Bricked and I can't unbrick it...
Can anyone help me???
I am busy right now… please give me two days and i will help you..
yousif amr said:
My tablet got Bricked and I can't unbrick it...
Can anyone help me???
Click to expand...
Click to collapse
Now...i attached the Stock frimware you must flashed on you Tablet
try to flash the frimware and try again.
AOSP 4.4.2
Hesham Sleem,
This is works very well, thank you!!! I have been looking for an "update" for the A3000 and this solves my issue.
Few things I noted from tha past 2 days since I upgraded to this ROM:
1) Rotation issue (Already stated by you) . This happens specifically during calls where the display switches to portait mode.Yet to try Xposed to fix this issue though. Which module would you recommend to fix this issue?
2) Garbled screen during bootup, before the 4 coloured circles appear. Not sure what the issue is or why it happens, but it happens everytime I start up the tablet.
3) Battery life seems to have dropped. Hopefully it will get better over the next few charge cycles.:fingers-crossed:
Apart from these, I find the tablet way better and responsive compared to the stock ROM.
Thank you for all your efforts!! :good:
Team Win Recovery Project 3.x
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
One recovery to rule them all:
The common TWRP is compatible with GT-P3100, GT-P3110, GT-P3113, GT-P5100, GT-P5110 and GT-P5113 at the same time.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or lost Data!
* Please do some research if you have any concerns about this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this recovery: Stay away from this thread!
*/
Download:
http://andi34.github.io/recoveries_tab2.html
Note:
The new "Common TWRP" won't be able to flash Roms compiled before 22.03.2016.
Important links:
https://twrp.me - official TWRP page
https://twrp.me/FAQ - official FAQ
http://andi34.github.io/faq.html - FAQ by myself
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[unified] TWRP, Tool/Utility for the Samsung Galaxy Tab 2
Contributors
Android-Andi
Version Information
Status: Stable
Created 2016-09-18
Last Updated 2016-09-18
Reserved
DEVICE SPECIFIC TWRP
Device specific TWRP are discontinued!
Please note: our kernel detects your Tab2 variant at boot and chooses the right driver and config for your device! In some cases (e.g. if the mainboard or the screen got replaced) your device variant isn't detected right and it will use wrong driver!
I am not sure how many user are affected, but in such case we can skip the intelligent board detection and hardcode the variant.
Attached device specific TWRP should work to flash latest Android 7 builds.
Feel free to buy me a coconut water if it helped you to keep your Tab still, after many years, almost up to date.
Old recovery threads have been closed because device specific recoveries are discontinued and cwm & philz touch are not maintained anymore.
Let's keep this thread on topic here please:
- No rom questions
- no questions about other recoveries
- make sure posting a recovery.log, maybe dmesg if you have issues on this common twrp
~ All my work, news etc. on http://andi34.github.io ~
Thank you Andi for your kindness... I don't see twrp 3.0.2.5 in your files. Is it OK to install it
zidane01 said:
Thank you Andi for your kindness... I don't see twrp 3.0.2.5 in your files. Is it OK to install it
Click to expand...
Click to collapse
Yeah, it is ok. I'll upload it tomorrow to androidfilehost. It was a quick test to check if eMMC 4.5 work fine (some tab2 seem to have newer emmc, because of that current twrp wasn't able to use the emmc and flashing wasn't possible. Its also the reason why latest builds don't boot on some tab2 and getting only a black screen).
~ All my work, news etc. on http://andi34.github.io ~
hey man, thank you for the recovery and ROM. I am currently running the official kitkat cyanogenmod on the old recovery. So to install and use this recovery, do I just flash it using the current recovery, or is there some other steps i need to follow?
arnavb8 said:
hey man, thank you for the recovery and ROM. I am currently running the official kitkat cyanogenmod on the old recovery. So to install and use this recovery, do I just flash it using the current recovery, or is there some other steps i need to follow?
Click to expand...
Click to collapse
right, you can flash it with your current recovery (if you download the zip)
arnavb8 said:
hey man, thank you for the recovery and ROM. I am currently running the official kitkat cyanogenmod on the old recovery. So to install and use this recovery, do I just flash it using the current recovery, or is there some other steps i need to follow?
Click to expand...
Click to collapse
Just flash it via current recovery :good:
Hello! Thank you for your good work, Android-Andi
Anyway, I'm just asking. Does everytime I update my CM13, do I also need to re-flash the Common TWRP? (Flash TWRP > Update CM13 > Flash TWRP again)
Kursem said:
Hello! Thank you for your good work, Android-Andi
Anyway, I'm just asking. Does everytime I update my CM13, do I also need to re-flash the Common TWRP? (Flash TWRP > Update CM13 > Flash TWRP again)
Click to expand...
Click to collapse
no not needed
Perfect & faster recovery 3.0.2-6.... Works very correctly for me ... Ty Andi
TWRP 3.0.2-7 uploaded
- Update the ext-csd.rev check for eMMC5.1 (fixes emmc detection for some tab2)
Hey everyone., how to install twrp in tablet,,?
jimwel said:
Hey everyone., how to install twrp in tablet,,?
Click to expand...
Click to collapse
Do u know how to use Odin?
If yes, flash twrp using Odin
ok, I know how to use odin, but am I flashing the twrp tar.md5 file only or is there something else I'm supposed to be flashing? can't find a thorough guide for rooting the galaxy tab 2 7.0 p3113
You can read here
BlaineLondon said:
ok, I know how to use odin, but am I flashing the twrp tar.md5 file only or is there something else I'm supposed to be flashing? can't find a thorough guide for rooting the galaxy tab 2 7.0 p3113
Click to expand...
Click to collapse
http://forum.xda-developers.com/sitesearch.php?q=How to root p3113 (here is wrong thread for this )
---------- Post added at 18:55 ---------- Previous post was at 18:47 ----------
jimwel said:
Hey everyone., how to install twrp in tablet,,?
Click to expand...
Click to collapse
Take zip twrp , sent zip to SD & install via recovery...Or take .tar-md5 file and flash it with Odin... From here by Andi : https://andi34.github.io/recoveries_tab2.html (you must read first)
Windows Defender detected a Trojan in the latest TWRP zip (3.0.2-8).
https://www.androidfilehost.com/?w=...d44fd3d141077f60723133fd33b53c552b55892a840a0
Not sure if it's a false positive, or if maybe the Android File Host mirror was infected.
Update: I searched the md5 in VirusTotal and it came up clean
https://www.virustotal.com/en/file/...86575991df34d1ebd93aaf4a6fea9bf9f4c/analysis/
I also redownloaded the zip file a 2nd time, with no virus warning. So looks like it was a false alarm.
I use 3.0.3-0 .... Excellent ! Thanks Andi
I have tried the common 3.0.3-0 on my tab 2 7.0 (p3110) but it installs larger than the screen and the touch wont work, connected mouse to OTG but nothing would work. ended up forcing a shutdown and reflash old version.
peeko1979 said:
I have tried the common 3.0.3-0 on my tab 2 7.0 (p3110) but it installs larger than the screen and the touch wont work, connected mouse to OTG but nothing would work. ended up forcing a shutdown and reflash old version.
Click to expand...
Click to collapse
Sounds like your bootloader makes trouble.
Edit:
https://androidfilehost.com/?w=files&flid=37700
Flash the one for your device using Odin.
Gesendet von meinem A0001 mit Tapatalk
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
Backup & Restore fully functional
MTP support
Micro SDcard and USB OTG storage support
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
All device-supported TWRP 3.1 features
BUGS
Touchscreen doesn't respond until you turn off the display once and wake it.
All TWRP bugs.
Report if you find another.
DOWNLOADS
Downloads section on top
INSTALLATION
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version from our website on your device
2) Reboot to TWRP
3) Hit Install and tap the "Images..." button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
OR
Follow: http://forum.xda-developers.com/android/development/unlock-root-lenovo-vibe-x3-row-x3a40-t3350514
XDA:DevDB Information
TWRP, Tool/Utility for all devices (see above for details)
Contributors
arpit_nnd
Version Information
Status: Beta
Current Beta Version: 3.1.0-0-20170324
Beta Release Date: 2017-03-24
Created 2016-09-27
Last Updated 2017-03-25
Reserved
Reserved
arpit_nnd said:
Touchscreen doesn't respond until you let the display turn off once and wake it. Workaround: Set the display timeout to minimum from settings.
Click to expand...
Click to collapse
Going to fix this ?
noskojv said:
Going to fix this ?
Click to expand...
Click to collapse
Definitely!
But, I will look into it once CM is up and running.
@arpit_nnd
It is Support Aroma Installer?
leo.riv said:
@arpit_nnd
It is Support Aroma Installer?
Click to expand...
Click to collapse
It's vanilla TWRP from official sources. If the official ones do, so will this.
I haven't used Aroma from quite some time now.
Test it and let me know if it works.
arpit_nnd said:
It's vanilla TWRP from official sources. If the official ones do, so will this.
I haven't used Aroma from quite some time now.
Test it and let me know if it works.
Click to expand...
Click to collapse
Yes it's working perfectly.
I am testing it.
When flash any zip in recovery Show "E : string resource 'up_a_level' not found. using default value"
leo.riv said:
Yes it's working perfectly.
I am testing it.
When flash any zip in recovery Show "E : string resource 'up_a_level' not found. using default value"
Click to expand...
Click to collapse
That's fine, it's a theme related bug, not a big issue.
Aroma is working fine, right?
arpit_nnd said:
That's fine, it's a theme related bug, not a big issue.
Aroma is working fine, right?
Click to expand...
Click to collapse
Yes
Chinese TWRP 3.0.2-0 , problems with touch not.
Tested on X3a40 - 6.0.1.
Link
noskojv said:
Chinese TWRP 3.0.2-0 , problems with touch not.
Tested on X3a40 - 6.0.1.
Link
Click to expand...
Click to collapse
Who built it?
arpit_nnd said:
Who built it?
Click to expand...
Click to collapse
http://club.lenovo.com.cn/thread-1868620-1-1.html
@arpit_nnd
The Chinese TWRP 3.0.2.0 is quite big so I think they maybe use Lolilop prebuild kernel with build-in .dt file.
I don't know how your TWRP Build but the Chinese TWRP and Sevenmaxs's can not install Aroma.
But my TWRP 2.8 can install well.
https://1drv.ms/u/s!Aj_PXc4oM3zKgV_zw6pTazyWCySZ
ctheanh said:
@arpit_nnd
The Chinese TWRP 3.0.2.0 is quite big so I think they maybe use Lolilop prebuild kernel with build-in .dt file.
I don't know how your TWRP Build but the Chinese TWRP and Sevenmaxs's can not install Aroma.
But my TWRP 2.8 can install well.
https://1drv.ms/u/s!Aj_PXc4oM3zKgV_zw6pTazyWCySZ
Click to expand...
Click to collapse
My builds on the OP have unseparated dt too.
Aroma works well as tested by @leo.riv.
@arpit_nnd
Can you help me to flash TWRP/ other Custom Recovery on my X3c50 running on stock MM 6.0.1 (VIBEUI_V3.1_1626_5.565.1_ST_X3c50)...??
Is it possible or not?
Thanks in advance :good:
@arpit_nnd
Hi thanks for TWRP 3.0.2
Can you update TWRP 3.1.0?
leo.riv said:
@arpit_nnd
Hi thanks for TWRP 3.0.2
Can you update TWRP 3.1.0?
Click to expand...
Click to collapse
Yes, I would do it.
When? I can't say clearly but, not anytime soon.
arpit_nnd said:
Yes, I would do it.
When? I can't say clearly but, not anytime soon.
Click to expand...
Click to collapse
Thanks.....................
New build up!
TWRP-3.1.0-0-x3_row-20170324 is now available in downloads.
What's new:
https://twrp.me/site/update/2017/03/10/twrp-3.1.0-0-released.html
The touch bug still persists but workaround takes no time now.
Turn off display instantly, wake it and you are good to go.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OrangeFox Recovery is one of the most popular custom recoveries, with amazing additional features, fixes and a host of supported devices.- Warnings :
Your warranty is now void, or not... (i have no idea bruh)
・ I'm not responsible for bricked devices, thermonuclear war or alarm app fails.
・ If it's your first time or you're unexperienced with flashing ROMS, please do some search before flashing!
・ YOU are choosing to make these modifications, you're the only responsible guy for messing up if you do so.
- Informations :
- Was built on the 11th of September 2022.
- Maintained by kota. (me)
- Used Kernel : Here!
- What's broken ?
- The Status Bar can now be totally seen but doesn't totally fit.
- Vibration still doesn't work normally (there have been changes to it tho)
- Please report anything else if you do find an issue!
- Installation Guides :
- Notes :
A glitch may happen where booting it via fastboot makes touch doesn't work sometimes.
To fix that, i also provided a flashable zip via sideloading (tested on TWRP) that directly installs it.
- First way to install : (Casual way, if touch works okay | .img )
1 · Reboot into bootloader and boot OrangeFox by using this command : fastboot boot OrangeFox.img
2 · Once the Recovery boots up, go to 4th menu (3 lines), and on it, click "More".
3 · Then click More, and Flash Current OrangeFox Recovery, then swipe and reboot!
- Second way : (More tricky, but always works out fine | .zip )
1 · Reboot into Recovery Mode with TWRP installed.
2 · Prepare an ADB Session on your PC and add to it the .zip version of OrangeFox.
3 · Get into Sideload Mode and do this command on adb : adb sideload OrangeFox_Name_Example.zip
- You're now done with flashing!
- Download Links :
- OrangeFox Folder (ZIP + IMG version) : Here!
- End :
Well, here it is! Real working OrangeFox for Mi 11.
At first it was just a random idea that went threw my head two month ago.
Now it's a real thing, it was really time consuming and head scratching but it was all worth it!
Enjoy and have a nice day!
By kota.
Please note!
For the second flashing method, TWRP isn't really "required", it's more to assure that your recovery let's you sideload any unsigned packages. You should be able to flash from some recoveries such as Pixel Experience and ArrowOS recovery.
As for unsupported ones such as CherishOS, RiceDroid, etc... They'll probably throw an Error 21 when trying to sideload any unsigned packages. (in this case, Orangefox but could also be Magisk) For them, simply use TWRP.
Reserved! #2
does this allow full backup and restore of the ROM?
Sage said:
does this allow full backup and restore of the ROM?
Click to expand...
Click to collapse
The "quick backup" (whatever it is) provides a backup of data and boot partitions. I'm not totally sure that the quick backup option is related to the one on main screen tho
Hello, thanks for your work, this recovery is amazing !
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
bongmeiister said:
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
Click to expand...
Click to collapse
Yup it works, at least with Pixel Experience it works. You just have to type in your code because the partition is encrypted
Nysioko said:
Yup it works, at least with Pixel Experience it works. You just have to type in your code because the partition is encrypted
Click to expand...
Click to collapse
Great, currently I'm running Evolution X with newest TWRP and there the recovery has problems with decrypting the internal storage - no matter what I try. I think it was not made for Android 12. https://wiki.orangefox.tech/en/guides/encryption Android 12 Custom Recoveries
What code do you mean to decrypt the partition? - Thanks for your response
bongmeiister said:
Great, currently I'm running Evolution X with newest TWRP and there the recovery has problems with decrypting the internal storage - no matter what I try. I think it was not made for Android 12. https://wiki.orangefox.tech/en/guides/encryption Android 12 Custom Recoveries
What code do you mean to decrypt the partition? - Thanks for your response
Click to expand...
Click to collapse
The code to decrypt the partition is the same you had to put in to lock your phone. Say you have a pin code of 3926, just type 3926 to unlock the score from orangeFox
bongmeiister said:
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
Click to expand...
Click to collapse
Of course it's made for A12
First link is dead
Nysioko said:
First link is dead
Click to expand...
Click to collapse
Oops! Fixing that
kotalol said:
Oops! Fixing that
Click to expand...
Click to collapse
Thanks
Excellent, working perfectly!
(other than vibration, which is very weird indeed!)
Hoping you will continue your great work, and build for A13...
nelvinchi said:
Excellent, working perfectly!
(other than vibration, which is very weird indeed!)
Hoping you will continue your great work, and build for A13...
Click to expand...
Click to collapse
Yep, A13 is coming soon...
With A13 decryption support, fix trial to vibration, removal of flashlight button, base on latest sekaiacg TWRP and much better holepunch handle!
Does it recognize and mount USB OTG? So I can do backups to USB storage?
seemebreakthis said:
Does it recognize and mount USB OTG? So I can do backups to USB storage?
Click to expand...
Click to collapse
Not yet because of the used kernel in pre-release, the next version will probably support ExFat USB OTG.
Hi, does anyone knows that this recovery works for Xiaomi EU roms ? Thank you !
epcwong said:
Hi, does anyone knows that this recovery works for Xiaomi EU roms ? Thank you !
Click to expand...
Click to collapse
It does!