Could someone PLEASE provide an image of the 4.4.2 Kitkat firmware (preferably Retail.EU) suitable for flashing with RSD Lite?
For all those who got stuck with a dead phone...
pj.de.bruin said:
Could someone PLEASE provide an image of the 4.4.2 Kitkat firmware (preferably Retail.EU) suitable for flashing with RSD Lite?
For all those who got stuck with a dead phone...
Click to expand...
Click to collapse
There is nothing we can do, someone needs the fastboot files from Moto / a leaked source.
Just use RSD+JB and then take the OTA to KK
dagoban said:
There is nothing we can do, someone needs the fastboot files from Moto / a leaked source.
Just use RSD+JB and then take the OTA to KK
Click to expand...
Click to collapse
No , flashing JB with RSD, which used to work before upgrading to KK, now fails with:
Downloading ...
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
Fastboot command failed
Is there a workaround?
Or is there a way to flash the KIA20.74.rar version using just the standard recovery mode?
Or to flash CM11?
(I was in the KitKat testdrive program, and all worked fine till the application updates of last week.
Now the boot process stops while either the Motorola or Intel logo is shown.
Full factory restore using recovery mode doesn't help.
I had this twice before while on Jelly Bean, and solved it by flashing with RSD.)
pj.de.bruin said:
No , flashing JB with RSD, which used to work before upgrading to KK, now fails with:
Downloading ...
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
Fastboot command failed
Is there a workaround?
Or is there a way to flash the KIA20.74.rar version using just the standard recovery mode?
Or to flash CM11?
(I was in the KitKat testdrive program, and all worked fine till the application updates of last week.
Now the boot process stops while either the Motorola or Intel logo is shown.
Full factory restore using recovery mode doesn't help.
I had this twice before while on Jelly Bean, and solved it by flashing with RSD.)
Click to expand...
Click to collapse
Remove the line with gpt_signed from the XML file is the rsd lite package
Hazou said:
Remove the line with gpt_signed from the XML file is the rsd lite package
Click to expand...
Click to collapse
No good, the boot and system patitions give the same problem, and still no booting.
Partition (system) Security Version Downgraded
PIV block validaton failed
eIV block validation failed for system
Invalid PIV image: systemFastboot command failedRecovery and motobp could be flashed.
pj.de.bruin said:
No good, the boot and system patitions give the same problem, and still no booting.
Partition (system) Security Version Downgraded
PIV block validaton failed
eIV block validation failed for system
Invalid PIV image: systemFastboot command failedRecovery and motobp could be flashed.
Click to expand...
Click to collapse
I had no problem flashing JB with RSD over KK
dagoban said:
I had no problem flashing JB with RSD over KK
Click to expand...
Click to collapse
Then where did you get JB?
The (Retail.EU) version I'm using is named "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml" and dated 01/17/2013.
My KK version is not the OTA, but the latest one from the testdrive program.
pj.de.bruin said:
Then where did you get JB?
The (Retail.EU) version I'm using is named "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml" and dated 01/17/2013.
My KK version is not the OTA, but the latest one from the testdrive program.
Click to expand...
Click to collapse
"CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml" is a JB image
What if u flash the gpt.bin (or how it is called) from a 4.4.2 update zip through fastboot. This will solve the gpt security mismatch. Then try RSD-Lite again, but remove the gpt line. Or flash the system_signed, recovery_signed, boot_signed manually with mFastboot or fastboot compatible with an image that's more than 100mb. And then do a full data erase.
The 4.4.2 update zip is floating around somewhere for the gpt file, already seen it on the internet.
This should solve your problem. If it doesn't u got a far greater problem i think, or i just don't know.
Hazou said:
"CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml" is a JB image
What if u flash the gpt.bin (or how it is called) from a 4.4.2 update zip through fastboot. This will solve the gpt security mismatch. Then try RSD-Lite again, but remove the gpt line. Or flash the system_signed, recovery_signed, boot_signed manually with mFastboot or fastboot compatible with an image that's more than 100mb. And then do a full data erase.
The 4.4.2 update zip is floating around somewhere for the gpt file, already seen it on the internet.
This should solve your problem. If it doesn't u got a far greater problem i think, or i just don't know.
Click to expand...
Click to collapse
Nope, flashing gpt_signed, or any of the other signed images, with mfastboot give the same preflash validation errors as with RSD, as was to be expected.
I have found some 4.4.2 update zips, but they are all TWRP backups, not full partition images; I don't see how these can be flashed with mfastboot.
Found it! I had to unlock the bootloader, and now JB can be flashed.
I guess it would also have been possible, after unlocking the bootloader, to flash the "unofficial TWRP recovery" and then install one of the 4.4.2 TWRP backups from an SD card.
XT1053 yesterday got into a never-ending reboot loop on around 20th second of loading up. I think the phone had the latest firmware update on it.
I tried to upload a new firmware:
GHOST_RETAIL_5.1_LPA23.12-15_cid9_CFC
RETAIL-US_4.4.4_KXA21.12-L1.29.1_2_cid9_CFC_1FF
TMO_5.1_LPA23.12-15_15
Using RSDLite 6.1.5
I always get:
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
Any ideas how to proceed?
P.S. XT1053 is a US *unlocked* version purchased directly from Motorola.
Hi
I have a Razr i here that stopped booting today. Have tried factory reset but it freezes at the Intel logo. Thought I would flash stock firmware to it so downloaded:
Filename: CFC_9.8.2I-50_SMI-29_S7_USASMIJBRTGB.xml
Creation Date: 02/05/2013 08:54:18
File size: 1462
Sofware Version: XT890_emara-user 4.1.2 9.8.2I-50_SMI-29 1359963544 release-keysSUNRISE_SMB_REV30_V2_R3_1251.B
However when I flash it, it fails with:
Downgraded Security Version
Update gpt_main version failed
preflash validation failed for the GPT
Fastboot command failed
The phone is definetly stock and not unlocked. I think this should be the stock firmware, so not sure whats wrong here. Sounds like the firmware is trying to downgrade the software - but that firmware is the latest release in the XDA superthread for the Retail GB. So not sure how the device could be ahead of that?
Am I missing something here?
I accidentally flashed the wrong firmware on this device. Was meaning to flash stock firmware. But accidentally clicked the wrong "flash.bat" script. My reasoning was to fix an error with the ota update for the September patch. The bootloader is indeed locked and is not unlockable. and I can partly flash stock firmware but the boot.img and gpt.bin keep throwing a error "preflash validation failed". The bootloader logs show "failed to validate boot img". The firmware I tried to flash to fix it was the stock firmware. The variant of this device is ali. Carrier is tracfone. Someone please help. I would rather this device be of use instead of a close to $300 paper weight.
I accidentally flashed the wrong firmware on this device. Was meaning to flash stock firmware. But accidentally clicked the wrong "flash.bat" script. My reasoning was to fix an error with the ota update for the September patch. The bootloader is indeed locked and is not unlockable. and I can partly flash stock firmware but the boot.img and gpt.bin keep throwing a error "preflash validation failed". The bootloader logs show "failed to validate boot img". The firmware I tried to flash to fix it was the stock firmware. The variant of this device is ali. Carrier is tracfone. Someone please help. I would rather this device be of use instead of a close to $300 paper weight.
With a locked bootloader you are not able to flash anything, I believe. How about a factory reset in the recovery?