Database Develop

Can't Format SD Card

I lost my sd card data flashing a rom. Could not mount it even thru recovery. Got a card reader, but it won't format it.
Using Mini Partition Tool to troubleshoot. I am not at a point where it shows three partitions. The main 16gb unallocated, logical. The ext3 unformatted 500mb, primary (think I did that by mistake when trying to recover partition). And a 32mb unallocated, logical. All zero used memory.
I need to get back to one partition allocated, primary. Then I can get sd data back on it and reformat thru recovery.
Again using Mini Partition Wizard
Any help please!

OK,
I got it repartitioned as primary and formatted, bu sd card from pc now.
Hope phone recognizes it.
Will update, if I need further help.
Ken

If you want a good program to format your sd card, try SD Formatter.
Download and install that, plug in your sdcard into your sd card reader and format it.
Choose Full Erase On (if possible) and Resize On. It will format your sdcard to factory default and that means even the ext partition will be gone too.

Well, all transferred. Still won't mount. Says can't mount either of the dev/blocks mmcb1k0p1 and mmcb1k0.
Staus bar says sd card damaged.
?????

musashiken,
Thanks, typing while you posted. Based on my last post should I still do that?
Ken

Yeah I think you should try to reformat again with the program I suggested, as that will full format your sd card.
Once done, put your sd card back to the phone and create ext partition in recovery.

At work now but will be working on it.
Thanks
Ken

musashiken,
Thanks, appreciate all your help
That program worked, and I am back up and running
Ken

Glad it worked for you. My sd card kept giving me problems and I have to use this every few rom flashes.

I have a similar problem. I installed a new 32 gb SDHC card in a CDMA Hero running Cryogenmod. All was working well for about 10 days, then I got an error that no SD card was found. I had the original card and tried to get to the Clockwork recovery, no luck. Finally, through Rom manager, (flash alternate recovery to Ramon, then back to Clockwork, I was able to boot into recovery.
I still cannot format the new SDHC card, through Recovery, Windows 7, or the Panasonic program listed above. The Windows format option sees the card as a FAT 121mb card, so does the above program. Is this new card toast? It came with a lifetime warranty from Kingston, but I am mad that it did not make 2 weeks.
Any help would be greatly appreciated.
Craig

If sdformatter did not work it may be bad.
I always had good luck with it.
Did you have all options set per instructions?

[Q] cvm recovery can't mount sd card

i installed 10.1 and upgraded to 10.2 on my nook hd. I downloaded the cm 11 recovery and cm11 rom and gaps to my nook to upgrade to kitkat. After i downloaded the cm 11 to my nook, the updater took me to recovery. i installed the cm 11, but then had problems. I realized that I was using the cm 10 recovery , and should have installed the cm 11 recovery before I attempted to flash the new rom. I then wrote verygreen's sd card image for cm11 and it did boot into recovery. when i tried to install the rom, the device said it couldn't mount the sd card. i tried using the cm 10 recovery image and that didn't work either. same message, couldn't mount sd card. I then formatted cache, data, boot, did another wipe and same issue. currently, it takes a long time but the nook hd will boot into cm recovery, but same issue about not able to mount sd card. I checked similar threads for other devices, but I couldn't find any solutions. I called barnes and noble customer assistance and they were totallyuseless. My question is how do i get recovery to mount my sd card?

ditto
I had the same issue on my nook hd-
When I wrote the image to the sd card- I could boot in to CWM 6.0.4.6, from that sd card- but it could not mount the sd card, or find any files on it. so I couldn't flash the emmc version. When I pulled that sd card out, it reverted back to cwm 6.0.3.2 (which worked fine with cm10.1) but again, it still can't find the sd card.
/sdcard is the internal sd and while is mounted and navigatable, it's blank and there's nothing to install from it. (is there a way to copy to it from some other device?)
the other option is to install a zip from /storage/sdcard1 but that does nothing but pop up
E: Can't mount /storage/sdcard1
or
Error mounting /storage/sdcard1
Click to expand...
Click to collapse
I've been following and using the info in http://forum.xda-developers.com/showthread.php?t=2600572
I've used both a linux machine with dd and a windows machine with Win 32 disk imager for flashing images.
I've tried a variety of file systems (does anyone know what is the preferred file system for a grossly oversized micro sd card for CM11?).
I've tried to find a newer better version of CWM, and have found references to a 6.0.4.5b but haven't actually found the files yet.
have also tried sideloading with adb, but the device is never found. with either version of cwm
Would be ok moving back to cm10 as well, but as long as it can't find a SD card, I don't know how.
love this little device, would greatly appreciate any assistance.
-dingo

continued
after much banging of my head against the wall, I discovered that if i let it boot to the 6.0.3.2 on its own, it would let me mount the sd card that had the initial image written onto it.
So i loaded the new cwm zip and flashed it.
pulled the sd card out and had to let it reboot on its own 4 or 5 times before it popped up emmc CWM based recovery 6.0.4.6
..which then let me mount the sd card as /external_sd and I was able to flash the latest cm11 nightly (yes, I'm a glutton for punishment).
I've pulled the sd card out and rebooted...
AND IT'S BOOTING!!!!
...this is awesome.

Success
i changed sd cards and downloaded the recovery, rom, and gapps on the new card. Recovery was able to mount the new card and I got everything installed. Initially recovery aborted the rom installation, so I downloaded another cm10.1 and was able to flash it. So everything is good now.

[Q] MicroSD not recognized

Hi, my problem it is that when i go to recovery my microsd card is never recognized. I tried to format it into FAT,FAT32 more times but the problem persist. what could be?
PS:the microsd card is a SanDisk 2GB

Solution
portagira said:
Hi, my problem it is that when i go to recovery my microsd card is never recognized. I tried to format it into FAT,FAT32 more times but the problem persist. what could be?
PS:the microsd card is a SanDisk 2GB
Click to expand...
Click to collapse
Go to recovery, then mount external sdcard
If you still have that problem, tell me if you have an custom rom.

Can't mount it. I ha ve cm10.1 and cwm 6.0.2.2

[Q] CWM or TWRP and 64gb TF card ?

Hello
I am not being able to use TWRP 2.8.1.0 or CWM 6.0.2.5 to be able to mount my 64gb microsd
I read that it was possible to mount 64gb cards with Lg2x but the TWRP and CWM doe not "see" the card
I am trying to use TonyP TBuild 05 since it allows to use the microsd as internal storage
(I know TonyP ROM is not supported anymore, but CM 11 sucks regarding swapping SD mount points, and with 32gb tf card its possible to use)
I already made ext3 partitions in the microsd so I can install apps to the new "internal" storage, and using the rest (Fat32 with 32kb sectors) to my usual stuff (media, mp3s, photos...)
But the recoveries just can not "see" the card, since both TWRP and CWM only see the real device internal storage as sd_card
Any ideas how can I mount my tfcard within the recoveries ? And of course, how can I really use the 64gb with the device ?
Tks

twrp doesn't detect sd card

Hello
Today i installed twrp recovery 3.0.2-0 but when i boot into recovery to backup my rom i can't find external sd card to backup there. It gives to options
Internal storage (1775)
USB storage (0MB)
But doesn't have the sd card option yet I've an external sd card in my phone. Is there any solution for it?