Database Develop

[Q] Problems with recognizing

Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?

croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
Check if you have the latest drivers, connect the phone in recovery (vol- and connect to PC), flash with LGFlash Tool.

RuedasLocas said:
Check if you have the latest drivers, connect the phone in recovery (vol- and connect to PC), flash with LGFlash Tool.
Click to expand...
Click to collapse
I cant flash my LG with LG Flash because tihs program dont reconized my phone.. "Phone is not found"

croluka4789 said:
I cant flash my LG with LG Flash because tihs program dont reconized my phone.. "Phone is not found"
Click to expand...
Click to collapse
palalos81 said:
hi. i woould like to downgrade from v20a to v10h and the lgflashtool doesn't work.some times stuck on ready and some others on 10%i have tried almost everything from installing the drivers once more until change pc and ports.is there any option to downgrade with another way?
Click to expand...
Click to collapse
There is no other way...
Did you follow the tutorial? Did you remained calm and gave time for windows recognise your device?
Did you uninstall and re-install the drivers? You're able to reboot in SW mode (vol- pressed while connecting to PC)?
Here you have all files needed:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Delete your old files, download new ones and follow the tutorial.
Remember to remain calm and give time to system recognise and install everything needed.
Good luck :fingers-crossed:

RuedasLocas said:
There is no other way...
Did you follow the tutorial? Did you remained calm and gave time for windows recognise your device?
Did you uninstall and re-install the drivers? You're able to reboot in SW mode (vol- pressed while connecting to PC)?
Here you have all files needed:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Delete your old files, download new ones and follow the tutorial.
Remember to remain calm and give time to system recognise and install everything needed.
Good luck :fingers-crossed:
Click to expand...
Click to collapse
TNQ...I fix my LG...and know work perfect I put 20A kdz. 4.1.2. and phone work perfect

Same problem here
I have the same problem. I think the stupid thing I did was to install V20a without rooting the phone. Now I cant root it. IS11LG_SystemBackupTest.signed.ap would not run and when I try to recover either with LGflashboot or LG firmware recovery I get the same error message "morning call is empty" (very strange error message). I can go back to v20a but since I am not completely happy with it I would like to resolve it. Is there any chance to fix it? I am not very confident to format bootload or installing custom ROM.
Thanks

sgiedrius said:
I have the same problem. I think the stupid thing I did was to install V20a without rooting the phone. Now I cant root it. IS11LG_SystemBackupTest.signed.ap would not run and when I try to recover either with LGflashboot or LG firmware recovery I get the same error message "morning call is empty" (very strange error message). I can go back to v20a but since I am not completely happy with it I would like to resolve it. Is there any chance to fix it? I am not very confident to format bootload or installing custom ROM.
Thanks
Click to expand...
Click to collapse
You cannot root the phone on V20a using IS11LG_SystemBackupTest.signed.apk, since that file is used for versions V10x. Check out this link for rooting V20a: http://forum.xda-developers.com/showthread.php?t=2180688

croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
Same problem here!

xavierleonelbr said:
Same problem here!
Click to expand...
Click to collapse
Uninstall all drivers and folders like "LG United Mobile Driver" and "LG USB Modem Driver".
Re-install the drivers:
http://www.4shared.com/file/rPpP2btT/LGUnitedMobileDriver_S4981MAN3.html
http://www.4shared.com/file/ZSMf2x6n/LGUSBModemDriver_Eng_WHQL_Ver_.html
Take out the battery, press "Power Button" (just to discharge all phone components), put the battery back on the phone.
Press "Vol-" and connect to PC. Wait while windows detect the device and search in windows update for possible new drivers.
Windows won't find a thing but will take some time while trying...
After that you should be OK.

Just did similar to my phone and followed the advice in this thread - now sorted. Thanks guys you rock!

if u epic fail to manually force the drivers in just install android jdk open it and update it.

croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
I had the same problem, after running several recovery procedures and kdz files, I finally was able to restore the phone to it's original ICS rom.
Download the files in the description and follow up the video.
http: www youtube com watch?v=12v5A3pArJQ
hope it helps.

Help, Hardbrick LG L90

Hello guys, i'm new here. First of all english is not my native language so sorry if i make any mystakes.
I flashed my phone to Lollipop. Then i tried to install twrp (with Flashify) recovery so then i could install Xposed... but the thing is that i may have used the wrong file..
My phone doesn't start. The only sign of live that it gives is when i plugged it to the PC, the pc makes the usual sound when you plug a USB. And it shows my phone as a usb with 63MB of storage (obviouly my phone has more storage). And when i go to Disk admin it shows me all the partitios that my phone has.
Also in Devices admin it shows my phone as: LGE AndroidNet USB Serial Port (COM6)
Do you know what can i do to unbrick my phone? :crying::crying:
LG D410H with lollipop 5.0

Did you unlocked the bootloader before flashing twrp?
Did you tried to hold vol + and plug USB cable to enter in download mode?

F. Gacrux said:
Did you unlocked the bootloader before flashing twrp?
Did you tried to hold vol + and plug USB cable to enter in download mode?
Click to expand...
Click to collapse
Hello, thanks for your reply.
Yes i have tried that already. Nothing seems to work :crying:
When i tried Volume up and plug the cable it shows nothing in my phone's screen. Just in my PC i sounds like a disconected or connected device

You probably flashed the wrong bootloader, which is a fatal error.
I know users that managed to recover other phones from this brick with LGBoardDiag as explained in this topic: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
I don't know how to get this TOT file, but the same partitions shown can be retrieved from your KDZ in BIN extension with LGFirmwareExtract, I think it's just a matter of renaming the files.

F. Gacrux said:
You probably flashed the wrong bootloader, which is a fatal error.
I know users that managed to recover other phones from this brick with LGBoardDiag as explained in this topic: http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
I don't know how to get this TOT file, but the same partitions shown can be retrieved from your KDZ in BIN extension with LGFirmwareExtract, I think it's just a matter of renaming the files.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/help/bootstack-flash-gone-wrong-t3120536
i have this problem exactly the same

I found this interesting topic, you probably can recover from this brick to allow you to enter in download mode using LGFlashTool (not the one that flashes KDZ) like this: http://forum.xda-developers.com/showthread.php?t=2475045
But we still need this TOT file and the DLL for your D410H that I do not know where to find or to create from the KDZ.

F. Gacrux said:
I found this interesting topic, you probably can recover from this brick to allow you to enter in download mode using LGFlashTool (not the one that flashes KDZ) like this: http://forum.xda-developers.com/showthread.php?t=2475045
But we still need this TOT file and the DLL for your D410H that I do not know where to find or to create from the KDZ.
Click to expand...
Click to collapse
But i can't go download modde :/ my phone does not show anything on it's screen..
i've been trying with this post:
http://forum.xda-developers.com/lg-g2/general/tool-unbrick-lg-g2-qualcomm-9008-board-t3072073
but it gives me the error that appears at the beggining of the thread. I unplugged it, remove battery, then put it back again and reconnect the usb, but the same problem :/ :crying:
also i have found not the TOT file but this thread:
http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429

I meant that will lead you to a working download mode, which is enough to restore everything, including partition table.
I have a suggestion, you said Windows detects as a mass storage unit, can you boot Linux and follow this thread http://forum.xda-developers.com/showthread.php?t=2582142 to see if can see all the partitions?
If yes, it's just a matter of extracting the KDZ of your variant and flashing the said partitions to get a working download mode to make a complete kdz flash.

lg l90 405 is believed to be 410 dual sim
hi to all guys, I would like to submit for your ATTENTION What I And Success Knowing and possibly come to restore rate.
I am the owner of an LG L90 model d405n, Wanting to make the Unlock bootloader I used an Application That I would have to just unlock the bootloader and recovery modified Install A.
In the cell AFTER tale reality 'hack And practically dead, he would not turn on even.
I Put in search tool various programs and various vain, the cell showed no signs of life.
Then, Dandolo now hope for him I tried to go for broke, I formatted a low debits and then with an Application (umbrick) I managed to flesciare start and everything else. Now the cell was lit and was anche in update download mode '.
I downloaded the firmware 405 and KDZ I Tried to use the flash tool but the procedure is always blocked at 2% giving an error.
With the instrument of 'LG I discovered sensationally That cell was identified coming D410, exhausted from the various prove not go into port I wanted to download the KDZ model 410D and, come by magic, flash tool worked! I installed the latest version information and cellphone works beautifully!
So now I have a phone with a firmware His (among other things the 410D E anche dual sim).
I would like to restore your system orifginale, That the 405 but I'm afraid to rate other trouble ....
I hope someone can give me a hand ...

LG L90 D410 Totally bricked. Please someone help.
I an LG L90 D410. I tried to install boot loader and after rebooting the phone, it was unusable. It is not showing any QhSUB_BUlk as well as any partition in My Computer. its not showing anything in PC. Please help someone how can i unbrick my phone.

Hello please try to follow this thread http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
This works 100% it helped me unbrick my phone. Hope it will work for you as well
Enviado desde mi LG-D410 usando XDA Forums

Problem after miflash

Hey guys, I need your help, I bricked my phone yesterday, and trying to solve it I used miflash, but now that the process finished my phone only vibrate and show a green light and then start a loop , and my pc wont recognizes my phone, somebody can help me please?
sorry for my bad english

Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804

Uivalf39 said:
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Click to expand...
Click to collapse
So in the last days I bricked my z2 pro by closing the bootloader with a custom installed, and to solve the problem I put it in EDL mode and I used the flash mi, but now when I press the power button it just vibrates and flashes a green Led, but it does not turn on, I already tried several combinations of buttons to get into fastboot and nothing, and when I plugged the usb into the pc it shows nothing

H811 bricked:a very rare case i suppose

this morning i set up lgup tool and updated my phone from 10N (lollipop) to 20i
when lgup tool done flashing and went to rebooting[150s] step i saw the phone died
but lgup was doing its job after reaching 100% i tried turning on the phone but no lock and even tried to enter download mode but it connects to pc as QHSUSB_BULK its been nearly 6 hours and i did what this said and put the sd card in the phone but it still wont turn on and no download mode neither i really appriciate if some one could help me with this half dead phone
Note:
OEM unlock ticked from developer tools and usb debugging on too

Just make sure to follow every step, it sometimes does work in first attempt

jam1445 said:
Just make sure to follow every step, it sometimes does work in first attempt
Click to expand...
Click to collapse
should i install any other driver beside usb driver?
i saw people not getting qhsusb_bulk but qualcomm 9008...

Update:
i managed to get out of qualcomm 9008 state with this guide now a new problem comes out:no download mode and nothing else only a charging message on screen even with using hotkeys please note that the phone is not recognizable by the pc or laptop in any way no beep while connecting the usb too

tried sd card solution but no luck

Then u must be facing permanent bootloop

Update:
Battery was short circuited some how
Tested with springs and a working battery of LG l90 model and phone started showing LG sign then sucure boot failed 1009
Just made a factory reset phone booted up completely but camera stopped working.
Need to flash 20i again or another rom?will find out

jam1445 said:
Then u must be facing permanent bootloop
Click to expand...
Click to collapse
found out how to fix my phone but problem is i need h811 .mbn and .xml files in order to use in qfil and i turned the whole internet upside down but could nt find any can you provide help with those eMMc files i mentioned? so many diffrences between ls991 and h811 mbn files and flashing them with qfil boots up my phone but no imei and no camera working also the baseband is unknown all i need is correct QFIL files
if you have...or if you know how can i get them please help

Nokia 8 Black Screen Of death not charging !

Hello guys i have nokia 8 with Nougat Os and tried to flash last OTA pie file With twrp sideload option but i think there was problem with loading files and the update stopped in 50 percent so i rebooted phone but nothing happened the phone turned off not turning on or recovery even not charging , tried to connect phone with usb cable to pc same nothing happening , is there is any solution i thought maybe the phone freeze on black screen so its been 2 days im waiting incase the battery still not drained so if the battery drained and i charged phone maybe its turn on !
i Tried all the boot options holding Vol+ Power ,
Vol- Power , Vol+ Vol- Power , nothing happen no vibrate or any sound .:crying:

WTF
What did you think when you flash OTA update with custom recovery TWRP?
These are things that you must know before you flash or do anything on your phone.
OTA UPDATE-->ONLY ORIGINAL RECOVERY CAN FLASH.

cyrusct82 said:
WTF
What did you think when you flash OTA update with custom recovery TWRP?
These are things that you must know before you flash or do anything on your phone.
OTA UPDATE-->ONLY ORIGINAL RECOVERY CAN FLASH.
Click to expand...
Click to collapse
u can download updates using adb sideload command and thats what i did

HS-USB Diagnostics 9008 ? In windows device manager?
What do you see in Windows device manager?
Do you see Fastboot, or HS-USB Diagnostics 9008 ?
Did you unlock_critical?
If you see HS-USB Diagnostics 9008, then your bootloader have to be bind to one slot.
Solution: Follow steps of LG qualcomm. You have a hard way a head you, because there or no ready model-files yet that "someone" extracted from our firmware-binary-files.
https://forum.xda-developers.com/verizon-lg-g3/general/fix-unbrick-hard-bricked-lg-g3-vs985-t3467067
You need drivers for Qualcomm installed on windows Qualcomm QDLoader_HS-USB_Driver 32 and 64bit Link is in the link above
Follow internet with these keywords when you search "unbrick HS-USB Diagnostics 9008 " on google. Also there is defferense between in partiotions mountspoint because of different GB-size 64GB 128GB
Don't follow this unless you know your thing: Warning! https://forum.xda-developers.com/mi-a2/how-to/guide-install-payload-bin-twrp-t3865319
This is my partiotion that I flashed and theyr size, size isn't important information but when flashing through Qualcom there is need for specifik hex-code, start-sector to end-block for each partition in the EMMC (phone-harddrive)
PHP:
274*432 abl.img
405*504 bluetooth.img
53*161*984 boot.img
8*388*608 cda.img
225*280 cmnlib.img
294*912 cmnlib64.img
61*440 devcfg.img
16*777*216 dsp.img
41*943*040 hidden.img
262*144 hyp.img
380*928 keymaster.img
17*809*408 mdtp.img
1*081*344 mdtpsecapp.img
114*331*648 modem.img
2*326*528 nvdef.img
53*248 pmic.img
237*568 rpm.img
11*079*680 splash.img
3*758*096*384 system.img
45*056 systeminfo.img
1*945*600 tz.img
3*006*464 xbl.img
22 File(s) 4*032*188*416 bytes
I am almost in the same situation, maybe yours is easier, dependes on the details we don't know exactly, but this Qualcomm Com port is the last resort. I trouble when I did flash everything when I dumped/extracted the firmware, maybe the software-hack-tools I used where not perfect, Or me dum for flashing every img and
Now my fastboot don't work with a black dead phone. I working it out. And will share the solution by time.

kurdi9132 said:
Hello guys i have nokia 8 with Nougat Os and tried to flash last OTA pie file With twrp sideload option but i think there was problem with loading files and the update stopped in 50 percent so i rebooted phone but nothing happened the phone turned off not turning on or recovery even not charging , tried to connect phone with usb cable to pc same nothing happening , is there is any solution i thought maybe the phone freeze on black screen so its been 2 days im waiting incase the battery still not drained so if the battery drained and i charged phone maybe its turn on !
i Tried all the boot options holding Vol+ Power ,
Vol- Power , Vol+ Vol- Power , nothing happen no vibrate or any sound .:crying:
Click to expand...
Click to collapse
did you get any solution??
i too by mistake flashed stock firmware with TWRP Recovery.
Phone is totally dead, isnt starting at all...

Shabbirkt said:
did you get any solution??
i too by mistake flashed stock firmware with TWRP Recovery.
Phone is totally dead, isnt starting at all...
Click to expand...
Click to collapse
I'm exactly in the same problem. I didn't do it by accident, it was stupidity. But I don't want to go to service center as a looser...
Please, some help.
BTW, I feel is stil warm, off, but warm, like there is something spending energy there. I tried pressing all the conbinations of buttons, even 15 min pressing all together.... Nothing happened.
Please, please, please. Any tips?
I bouhgt the phone 3 days ago:crying:

Dr.Csoo said:
I'm exactly in the same problem. I didn't do it by accident, it was stupidity. But I don't want to go to service center as a looser...
Please, some help.
BTW, I feel is stil warm, off, but warm, like there is something spending energy there. I tried pressing all the conbinations of buttons, even 15 min pressing all together.... Nothing happened.
Please, please, please. Any tips?
I bouhgt the phone 3 days ago:crying:
Click to expand...
Click to collapse
No luck yet. I tried to flash Official firmware using twrp which eventually let to death.
Service centre guys will says your phone is dead when pc wont detect it...

Shabbirkt said:
No luck yet. I tried to flash Official firmware using twrp which eventually let to death.
Service centre guys will says your phone is dead when pc wont detect it...
Click to expand...
Click to collapse
Do you know if they can or not notice if device was hard bricked by software mistakes?

@kurdi9132
Plug your phone to your computer via. USB, and leave it for 15-16mins, you should hear a notification sound, then check Device Manager to see if Qualcomm 9008 comes up.
Please let us know!

well... doing some stuff with t-virus and my curiosity led to situation like what is mentioned here. everything was fine untill I pressed reboot>edl from recovery. Phone went down and went down deep!
PC makes sound when I connect the phone. but nothing more than that.
Device manager shows HS-USB Diagnostics 9008.
It looks like that the phone does not even charge. I cant feel any warming while connected to power adapter.
So...?