Related
i've paired a few things (bt headset, parrot car hands free, computer) but it won't automatically connect to anything. i have to manually tell it to connect. is there a setting that i'm overlooking, or a tweak to allow this?
thanks.
Yeah I noticed the same thing in the car today. Maybe because of whether it is discoverable or not? When you turn that on it only does 120secs. I haven't played with it, but i sure hope it can auto connect, or at least with froyo.
It auto-connects to my car, but not to my home phone. I think that's because the car itself initializes the connection... Would be nice to figure out how to fix this, so I wouldn't have to connect manually every time I come home.
wgarrido said:
Yeah I noticed the same thing in the car today. Maybe because of whether it is discoverable or not? When you turn that on it only does 120secs. I haven't played with it, but i sure hope it can auto connect, or at least with froyo.
Click to expand...
Click to collapse
In my 10' BMW, I had to check mark to always allow the car to access my contacts. Once I did that, it would automatically connect to my car upon startup of the car.
Hope that helps.
rajsharma714 said:
In my 10' BMW, I had to check mark to always allow the car to access my contacts. Once I did that, it would automatically connect to my car upon startup of the car.
Hope that helps.
Click to expand...
Click to collapse
in my '10 Genesis Coupe, I cannot get it to auto connect, even though i reset it two times and checked "always allow." This is the first phone this has ever happened with, every other one auto connected (HTC Touch Pro2 with winmo 6.5 AND a hacked android 2.0, htc hero w/ 2.0 and 2.1, n1 w/ 2.1 and 2.2, and a feature samsung phone) so I know its not the car.
Any more ideas?
What I figured out is that auto-connect on this phone just doesn't seem to work at all. The only time it auto-connects is to my 06 Acura when I start it and only if it's not already connected to anything else. But that's because when I start my car, it's the car that initiates a connection, not the phone. If I'm connected to something else (like my home phone, for example), when I start my car, and drive off, Bluetooth connection to my home phone will get dropped after I get away for more than 100 feet, but it will never connect to my car after that. And it never connects to my home phone on it's own. Very painful!:-(
My Captivate will automatically connect to my Parrot hands free device when I get into the car. I don't know which device is pushing the connection. However, I also have a Miccus BluBridge Receiver in my car plugged into the Aux jack. This device doesn't auto connect.
To get things working I have to go to the home screen, settings, wireless, blue tooth, then click on the device. A friend of mine was talking about Tasker as a possible app to use, but I don't really want to spend the money on it until I know it will do what I want. The other annoyance I have is that speaker, headset, and bluetooth volume are all the same. It looked like Tasker would solve my second problem, but perhaps not my first. Has anyone else investigated this?
Bluetooth auto connect
I too thought I had an issue with this. Mine is now working OK most of the time. One thing I discovered is that if there is more than one BT device available the phone sometimes will not connect automatically.
I wonder if this has to do with the fact that it will not connect to more than one device at a time. This is big downside for me that I hope get corrected (but please GPS first)
It won't conect correctly because there is no setting for always visible. The handsfree device searches for your phone to initiate the conection and if it can't see it it won't try to conect.
jbl7979 said:
in my '10 Genesis Coupe, I cannot get it to auto connect, even though i reset it two times and checked "always allow." This is the first phone this has ever happened with, every other one auto connected (HTC Touch Pro2 with winmo 6.5 AND a hacked android 2.0, htc hero w/ 2.0 and 2.1, n1 w/ 2.1 and 2.2, and a feature samsung phone) so I know its not the car.
Any more ideas?
Click to expand...
Click to collapse
I also have a Genesis Coupe 2010 (3.8 in case you care) and my vibrant connects just as well as my TouchPro2 and my Nexus One running Foyo.
The Nexus One stock 2.1 never worked, reconnecting every couple of minutes.
My first Vibrant (same as captivate) did not work well either. I expected it was because the BT stack in Eclair did not support car profile, but after I exchanged my Vibrant due to a rattling volume key, it has worked very reliably with the GC'10. It autoconnects ad soon as I turn on the engine, without having to do anythong, followed by "transfer complete".
I leave BT on all the time. My phone is not rooted or modifief in any way, running stock software for everything.
Sent from my SGH-T959 using XDA App
thumper_1151 said:
It won't conect correctly because there is no setting for always visible. The handsfree device searches for your phone to initiate the conection and if it can't see it it won't try to conect.
Click to expand...
Click to collapse
That is not true and it is not necessary, not even during pairing, ad the connection is initiated by the phone. Once passkeys are echanged, visibility is not required.
Please verify your answers prior to posting to prevent other people from getting confused.
Sent from my SGH-T959 using XDA App
jbl7979 said:
in my '10 Genesis Coupe, I cannot get it to auto connect, even though i reset it two times and checked "always allow." This is the first phone this has ever happened with, every other one auto connected (HTC Touch Pro2 with winmo 6.5 AND a hacked android 2.0, htc hero w/ 2.0 and 2.1, n1 w/ 2.1 and 2.2, and a feature samsung phone) so I know its not the car.
Any more ideas?
Click to expand...
Click to collapse
What firmware do you have on your GC? Have you deleted all phones?
Things to try:
Delete all phones from the car (setup/delete all phones)
Restore the phone to factory settings.
Upgrade the car's radio/BT firmware (see dealership for details or try gencoupe.com)
Call ATT support (?)
Wait for froyo
Get used to
Return/sell the phone
Hope this helps
Sent from my SGH-T959 using XDA App
I have the same issue with my Plantronics Voyager Pro . Can't get it to auto-connect! Anyone have an idea what the problem is?
Sent from my SAMSUNG-SGH-I897 using XDA App
I am a tech for mercedes and we have to set the phone to always visible or it wont auto connect. It is the same way with pioneer bt radios. I am just speaking from what mercedes told us and personal experience with pairing phones. I have had the problem probobly 100 plus times at work where phones wont auto connect evan though they are paired corectly and when you change the phone to always visible it fixes it every time. I know the phone can initiate the conection, i just know they don't all do it automatically.
thumper_1151 said:
I am a tech for mercedes and we have to set the phone to always visible or it wont auto connect. It is the same way with pioneer bt radios. I am just speaking from what mercedes told us and personal experience with pairing phones. I have had the problem probobly 100 plus times at work where phones wont auto connect evan though they are paired corectly and when you change the phone to always visible it fixes it every time. I know the phone can initiate the conection, i just know they don't all do it automatically.
Click to expand...
Click to collapse
Never had the problem with any of the Pioneer radios we've had, and my Eclipse doesn't have that problem either. To be fair, I've no experience with MB cars, but that shouldn't be the case.
I know with my Eclipse HU, I had to initiate the connection while in the phone menu otherwise it would connect for BT audio but not for the phone. After setting up the phone it will connect as its supposed to regardless of what input I'm using.
just as an update to my initial problem... my parrot system in my car auto pairs all the time now (it just takes ~30-45 sec to do so), but the phone still will not auto pair to bt headset or computer...
I don't think its supposed to auto connect to the computer. I think its a need based connection.
And on that note, when i send a file my phone does connect. I don't use a dedicated bt headset so i can't talk about that unfortunately.
Sent from my SAMSUNG-SGH-I897 using XDA App
Lucke said:
just as an update to my initial problem... my parrot system in my car auto pairs all the time now (it just takes ~30-45 sec to do so), but the phone still will not auto pair to bt headset or computer...
Click to expand...
Click to collapse
When you say 30~45 sec, does it mean from powering the car up until BT is usable through the car system? That's is normal and the duration depends on how many contacts you have in your phone book and how many phones per contact. Mine take about the same.
BigJayDogg3 said:
I don't think its supposed to auto connect to the computer. I think its a need based connection.
And on that note, when i send a file my phone does connect. I don't use a dedicated bt headset so i can't talk about that unfortunately.
Click to expand...
Click to collapse
I agree. It is only supposed to autoconnect to devices that support the handfree profiles, if the handfree profile is set as default.
I tired turning visible on right before i started the car and it connected no problem. Really annoying. I have a pioneer as well. Too bad you can't set it to visible always. Other than that it works much better than it did with the Fuze/Any WinMo phone. Never had a phone that worked right in the car, except for my GF IPhone, works great.
I hope it works better in Froyo.
Hello!
I bought an SBH20, paired with my XZ via NFC, listened to music, then disconnected the headset, using the NFC.
After a while, i tred to connect again via NFC but all i get is a 'connecting' message, BT turning on -white BT icon- but no real connection, therefore the BT turns off.
After several tries it finally connects, but it's not reliable this way.
I noticed, if i enter to settings(not turning anytihng on/off) and trying to connect (still using NFC), everything works fine: connects, disconnects perfectly, and handles the BT as it should.
I've reseted the headset, tried single and multi point modes aswell. Deleted the BT devices, then repaired, still got the problem.
Am i doing sth wrong? I want to connect and disconnect the headset with a simple touch, and not toggling the BT manually (NFC yeah...) Is this something, SBH20 is not compatible with?
(btw sony support says: "For subsequent connections between devices that have already been paired once, make sure that Bluetooth™ is turned on so that the devices can connect automatically." If it's a "must" , then what is the [email protected] use of the NFC??? Just to pair once???)
Please share your experiences! Any advice would be greatly appreciated!
Thanks for reading ( and sorry for my english)
I actually have the same problem using the SBH50. For me sometimes it connects perfectly fine, other times it doesn't and I have to go into bluetooth settings after which it seems to connect properly.
I have noticed that it also depends on how I disconnect it; if I remember to touch the headset to disconnect then next time when I try to connect I have more chance of it being successful. Also, when I try to connect I hold the headset aganist the phone even after the ‘connecting’ popup until I get the 'connected' popup.
These are just work-arounds which aren’t always 100% successful though so would be good to find out what the proper method is.
fl4r3 said:
I actually have the same problem using the SBH50. For me sometimes it connects perfectly fine, other times it doesn't and I have to go into bluetooth settings after which it seems to connect properly.
I have noticed that it also depends on how I disconnect it; if I remember to touch the headset to disconnect then next time when I try to connect I have more chance of it being successful. Also, when I try to connect I hold the headset aganist the phone even after the ‘connecting’ popup until I get the 'connected' popup.
These are just work-arounds which aren’t always 100% successful though so would be good to find out what the proper method is.
Click to expand...
Click to collapse
It is a real shame... In my case it's the opposite, if i touch the headset to disconnect, the next nfc-connect tends to be less successful.
(and i noticed that it also matters if i turn off the headset after disconnected, or not)
And what is really odd, that i don't have to do anything in the settings menu ( or bluetooth settings) just open it, and everything works like a charm...( all connect or disconnect tries are succesfull, no exception, even if i push the headset repeatedly to the pohone's back)
I'm not affraid to mod some system files, apps, maybe build.prop tweaks, but i don't know where to start. In bulild.prop there are only a few nfc related lines (tried to enable/disble those)
So i'm not alone...maybe even more people are in the same boat, trying to solve this.
Again; any related info is welcome
I also have a sbh50 but i normally disconnect by turning off the headset. I have set it in smartconnect to turn off bluetooth automatically when the connection shuts off but it doesnt always do that.
It reconnects with no issues when bluetooth is on and i turn the headset on again. I use the nfc tap only for the initial pairing.
The only issues I have is the google music skipping issue that i posted the other day and the gmail smart connect not working on the sbh50
swtam said:
I also have a sbh50 but i normally disconnect by turning off the headset. I have set it in smartconnect to turn off bluetooth automatically when the connection shuts off but it doesnt always do that.
It reconnects with no issues when bluetooth is on and i turn the headset on again. I use the nfc tap only for the initial pairing.
The only issues I have is the google music skipping issue that i posted the other day and the gmail smart connect not working on the sbh50
Click to expand...
Click to collapse
Well, then we don't have the same issue. I tought i could use the nfc for connect/disconnect (i actually still think it is capable of that, just sony messed up sth)
Could you try to connect/disconnect and connect again with your devices, please :angel:
I'm really curious about this whole nfc story ( why does the headset have the chip/tag if it only works for initial pairing -its not a big deal to pair manually, especially that it has to be done just once-, and on the other hand: if i put nfc in the device, why not put in this functoin too- not a big deal: a proper working BT toggle, but it brings a tad more functionality-
I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
fury683 said:
I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
Click to expand...
Click to collapse
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Thanks. I wasn't able to test it on 4.2.2 (it took right away OTA out of the box) with my Moto X, but it was working fine on my Droid Razr Maxx on 4.1.2 Jelly Bean before I got the Moto X.
I will have to try and see how it works with just the A2DP device without the handsfree. I rarely ever talk on the phone, and with the Touchless Controls I could call people and just pick up the phone. Or turn the phone portion back on for the A2DP device so the sound would come through my speakers but I'd still have to use the mic on my phone...
Still annoying. Thanks again for the reply.
gtg465x said:
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
Click to expand...
Click to collapse
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
I have a Dension BT gateway for my car that provides BT audio and hands free. My phone connects automatically as long is bluetooth is turned on. I also connect to a BT OBD2 adapter sometimes, and I tried it today, and I kept playing Pandora via BT and also connected to the OBD2 adapter and had data going from both of them.
fury683 said:
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
Click to expand...
Click to collapse
Yeah, but they aren't a separate connection I don't think. Pretty sure the one connection handles both.
Seems to be an issue with the A2DP device specifically. I unpaired my car and the dmzmusic device and repaired them both, same result. I added just the dmzmusic, and got the same thing.
I changed my Tasker profile to just flash a toast message to show it connecting and disconnecting instead of firing Pandora to see if that mattered and it didn't. I did not try disabling the Tasker actions entirely to see if that worked.
I have a pair of Bluetooth headphones at home that I may try as well to see if it will connect to those. They fire the same task as the dmzmusic does to launch Pandora when they connect, and kill it when they disconnect.
Hoping this gets fixed, because it's VERY annoying.
Is it possible to submit this to Google/Moto as a bug if it is a larger problem with all A2DP devices?
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
gtg465x said:
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
Click to expand...
Click to collapse
Thanks. I will try it with the Philips bluetooth headphones as well. The device in my car is pretty cheap. I don't know what version of Bluetooth it has, but it was only about $5. Anyone know of a similar device that can receive a Bluetooth audio signal and convert it to 3.5mm, and is powered by USB?
totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Well I sort of solved this. There's an app in the Play Store called Bluetooth Auto Connect. This can connect to bluetooth devices with a set of conditions and states, and works as a plug-in to Tasker. I told it to connect to dmzmusic upon connection to any other bluetooth device (in this case, my General Motors hands free). Worked perfectly. Thought you'd like to try it out for your dual device setup.
However, I also have a new issue. It seems the reason my phone call wasn't on bluetooth at first was due to some sort of connection issue with the General Motors unit. While driving home tonight, every few minutes my car radio said Connected. And every time I turned the car screen on to thumb up a song on Pandora, it flashed Connected to a trusted device. Which implied to me that it was disconnecting periodically. No idea why it would do this. Didn't see any setting for it in bluetooth, and battery saver isn't on.
Anyone seen something like this? Will try tomorrow without the trusted device settings to see if that matters....
I noticed a similar auto-connect issue with mine, when I was attempting to troubleshoot the stuttering A2DP issues I'm having. If I have the HFP and A2DP profiles both enabled, they both connect right up when the ignition is on. If I have the HFP profile disabled, and only A2DP enabled, it doesn't connect right away and I usually have to manually force it. Very strange. This whole BT situation on this phone has been a pretty big disappointment for me, since I had everything working great with my GNex (running 4.3) and now it's like I've lost the heart of my car audio system.
I bought the Kinovo BT dongle for my wife for Christmas, so it will be interesting to see how that works with her Moto X. I'm pretty excited about trying out the AptX encoding for lossless audio, but I doubt she will even notice the difference.
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
totempole said:
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Did you look at the auto connect app? It worked fine for me. My Bluetooth stopped working for a day or two because I froze a process without realizing what it was so BT wouldn't turn on at all. I think I have to remove and repair both of my devices to get the same setup I had on my Razr Maxx on 4.1.2,
The connecting/disconnection and/or 1-2 minute lag from my General Motors hands-free connection was annoying too. Have to see if that persists. I tried making the A2DP device the trusted one to see if that changes anything.
Really hoping this is something that Moto can/does fix, especially through a Play Store push like they've done with Active Display and the camera app.
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
640k said:
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
Click to expand...
Click to collapse
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
fury683 said:
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
Click to expand...
Click to collapse
not rooted/haven't wiped.
640k said:
not rooted/haven't wiped.
Click to expand...
Click to collapse
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
fury683 said:
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
Click to expand...
Click to collapse
could be completely device specific too. if your vehicle is BT v2.x or whatever. my tunelink specifically has problems with data/audio stream with the X that my X doesn't have problems with on other devices. could be software/hardware incompatibility issues.
FWIW, my vtech BT phone @ home would NEVER pair with other devices. i would always have to manually pair.
I just emailed Moto about this, because I'm having bugs too. I think that you're on to something, 640k. My Pioneer headunit (FH-P800BT) has BT 2.0, and while HSP connects fine, A2DP only works on the first pair, and after disconnecting once and reconnecting, it won't ever connect A2DP. I have to completely unpair the phone and re-pair it to get both A2DP and HSP working. My phone also gets stuck on "Connecting..." under BT whenever it's having issues connecting with A2DP. Here's the email I sent off to Moto"
I've noticed an issue with my new Moto X that I never had with my Samsung Galaxy Nexus. The phone itself performs way better than my older phone, but I've had a specific bluetooth problem. I have a Pioneer headunit that supports A2DP as well as HSP (music playback and headset functionality) and with my Galaxy Nexus, it worked great, I paired my phone up with the headunit, and both A2DP and HSP would pair at the same time, and work perfectly. With my Moto X, when I first pair the phone to the headunit, it pairs both profiles, but after I've disconnected (turned car off or turned bluetooth off) and come back, it only pairs HSP, and when I try to pair A2DP, my phone gets stuck on "Connecting..." under bluetooth to the headunit, and never will connect to A2DP unless I unpair and re-pair the entire phone. I've tried resetting my headunit and phone and still the same problem exists. Looks like other people are having issues with bluetooth too, as per this article on a popular Android forum > http://forum.xda-developers.com/showthread.php?t=2562186 < I'd like you all to check this out. Seems it's just on 4.4, and wasn't present on 4.2.2 (I never checked myself on 4.2.2, as I immediately upgraded to 4.4 when I got my phone. This doesn't seem to be a hardware problem, but more of a software problem. Please check into this, and don't just read this and act like it's only a problem a handful of people are having. I'd like to have this fixed, and while it's not a deal-breaker for me to use the phone, it does make me a bit frustrated. Thanks in advance!
Click to expand...
Click to collapse
Anyone has any idea, why if you go outside the phones range GEAR disconnects, but when you come back it does not want to connect automaticly.
I mean this watch got to get a update soon. with all the problems and lack of software.
OK, maybe I got it.
If you go to Bluetooth settings and click GEAR, you got the choose:
-automatic connection
-ask me every time.
So automatic will be.
But I will not test it, because I already put it on local ebay for 199 eur.
PROBLEMS that Samsung has to fix, or the hell with them:
-controlling music via gear to your phone
-giving the option that gear connects to your phone only with the connection and not with the media. (can not use BT ear set to listen to music) like pebble
-automatic disabling the screen when you go to sleep mode
-giving the alarm in the gear directly and not over the phone
-when answering a phone call with the phone and not the gear, sound comes from the phone instead on the gear (this is the stupid thing ever. I answer the phone and people scream on my wrist)
this is the list witch i can not live without, so come quickly my moto 360.
cvenk said:
-giving the option that gear connects to your phone only with the connection and not with the media. (can not use BT ear set to listen to music) like pebble
-when answering a phone call with the phone and not the gear, sound comes from the phone instead on the gear (this is the stupid thing ever. I answer the phone and people scream on my wrist)
Click to expand...
Click to collapse
These two have me confused by exactly what you mean. Obviously you are getting rid of it, im more just curious if im understanding correctly.
I have a BT headset connected and have listened to music directly from my Neo while its still connected to my phone, is this not what you mean?
And when i answer a call from my phone, it comes through my phone, so i am confused by this one as well.
cloudraker said:
These two have me confused by exactly what you mean. Obviously you are getting rid of it, im more just curious if im understanding correctly.
I have a BT headset connected and have listened to music directly from my Neo while its still connected to my phone, is this not what you mean?
And when i answer a call from my phone, it comes through my phone, so i am confused by this one as well.
Click to expand...
Click to collapse
WHAT I meant:
I. example
1 (pebble , phone, BT headset)
All are connected, I can listen to my music which is on my phone, control it via pebble (volume up/down, next song pause....) and listen on my BT headset (BEATGO2)
2. (GEAR and BT Headset)
OK, you can only have 2,4 GB of music on GEAR (for the first time is OK, but I'm not gona change all the time my music collection
I connect BT headset via GEAR and listen to music.
3. (Not possible)
My GEAR connects to my phone. Now I want to listen to my music and put my BT headset. I connect my BT headset and my GEAR immediately disconnects.
Now I can not control my music via GEAR but via BT headset and I don't have GEAR ONLINE so it suxs. And after music, I have to manually connect my GEAR to my phone, and than my BT headset disconnects.
II. example
My gear is connected to my phone (which is the main part of the smart watch).
I got a call. I quickly pull out my phone and answer the phone. I start talking on my phone, but sound is coming not through my phone , but through my GEAR.
Microphone and speaker are on GEAR, I have to click BT speaker OFF on my PHONE to talk through my phone. EVERY TIME. And I don't like to talk all the time over GEAR, In crowded places NO GO.
I wanted to disconnect PHONE functions on my BT setting on my GEAR connection, but there is not a possibility. If i just click anything on GEAR , it just disconnects.
And I will not click every time that i have a call. First ANSWER that quickly BT disconnect,.(it is just stupid)
I hope you all have a good picture of the problem.
Am I missing something in setting or what.
OK, I don't have Samsung phone , I have LG G2, but any case It shouldn't do this.
Im guessing the phone call thing happens to be a downfall of not using a TW device? Seems maybe the phone sees the watch as a headset and tries communicating that way? just a theory.
I think your issue is using a non Samsung phone and thinking a device that's only officially compatible with Samsung phone's will and should work fully.
And finally what gets me angry is people not reading what a device can do BEFORE buying it! If you don't then the only person to blame is yourself and not the company.
Sent from my SM-G900F using XDA Premium 4 mobile app
jongilluley said:
I think your issue is using a non Samsung phone and thinking a device that's only officially compatible with Samsung phone's will and should work fully.
And finally what gets me angry is people not reading what a device can do BEFORE buying it! If you don't then the only person to blame is yourself and not the company.
Sent from my SM-G900F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
why, I know it's not compatible, And I know it works... but this are the small problems, that no one knows before you try. I would go in one minut to SGS4 but I love my G2 and no Samsung for me. Been there done that.
So thanks for the info, than on Samsung phone, calls work.
We are one step closer.
Still I don't know if I'm gona sell it. I put 200 eur so in other way I'm gona wait for the update and work it than. (I like this watch... but...)
I have no option on my z1 for automatic reconnect, and have same trouble when getting out of range, the gear never reconnect unless I toggle bluetooth off and on ( on watch or on phone) or clicking connect in gear manager. Must be a drawback for not using samsung phone as it works with my bluetooth headset.
Call works perfectly though.
If your on a phone that says auto reconnect make sure you hit it, I had to test it with my wife's phone just to make sure it worked properly....If you have a Samsung phone it will auto this for you.....If you have a phone that doesn't have either feature ask your manufacturer about it or ask about it the Q&A section of XDA in device category to see how activate this feature.
Sent from my SM-N900W8 using xda app-developers app
i have problem reconnect too, i'm using s4 zoom and every time my gear is getting back to range its not reconnecting.
i have 4.2.2, dont have the option auto connect in bluetooth settings.
any ideas?
Hey All,
I've done a quick and dirty search for this problem, but I haven't found anything that's exactly the same.
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
I have done the unpair/re-pair thing a couple of times, but nothing changes.
I had an HTC phone before this, and it'd reconnect automagically to my cars BT server, so I suspect it's nothing to do with the car's BT radio. I really miss that...
Thanks for any suggestions anyone might have in how to remedy this. Fwiw, I'm willing to go through a diagnostic procedure if someone would clue me in to just how to do that.
cheers,
john
I've had issues with the bluetooth and pairing. When I was on 4.2.2 (I think..) it wouldn't connect automatically at all, and I used an app to connect for me. I have a Chevrolet Cobalt and it wouldn't connect to my built in bluetooth for calls or a small bluetooth dongle that I use for playing music through the AUX input on the stock radio.
https://play.google.com/store/apps/details?id=org.myklos.btautoconnect&hl=en
Once I was on 4.4.2 it seemed to work much better. I have no real issues now on 4.4.4. The only time I notice it not really working right is when I try to connect to the bluetooth speaker in our bathroom at home. If I turn the speaker on, it almost always connects to my girlfriends phone nearly instantly, even though I open the bluetooth menu and tap the paired device to manually initiate right when I turn on the speaker. It usually takes me a few tries to get mine to connect before hers, or I ask her to shut her bluetooth off for a moment while I connect. She uses the speaker every day because she leaves for work after me, so it only happens to me 1-2 times per month on the off chance that I want to listen to music or a baseball game in the shower, so it never really bothered me much.
I think the bluetooth radio in this phone could be better.. I never had any similar issues with my Droid X or Moto Razr Maxx so I'm not sure what the deal is...
Edit: forgot to mention I also have an XT1060, but not dev edition. My bootloader is unlocked and I am rooted, but using the official 4.4.4 VZW rom with Xposed.
I have never had any issues pairing Bluetooth - on either my car or moto 360 watch (even simultaneously).
However, I have noticed that the Bluetooth connects much quicker on custom ROMs when compared to stock.
I think tour connection issue may be a setting or rogue app related.
Sent from my Moto X using XDA Free mobile app
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
jrredho said:
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
Click to expand...
Click to collapse
You may need to delete the profile for the Bluetooth pairing in your car. Could be a conflict there.
Otherwise, try looking at your Bluetooth settings on the phone.
Sent from my Moto X using XDA Free mobile app
jrredho said:
...
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
Click to expand...
Click to collapse
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
KidJoe said:
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
Click to expand...
Click to collapse
Guys, thanks for staying with me on this. One thing I've definitely learned is that the bluetooth thing is something I'm pretty ignorant on. I can see that I'm going to have to study it a bit before too long. Gad, that HTC spoiled me rotten---at least in that way.
I haven't tried the phone with any other BT devices. This is mostly because I don't own but two, the car and a travel speaker, and I haven't had the speaker out of its case since I scored the phone six or eight weeks ago. Also, I did some housecleaning, so I have only a small fraction, maybe 20%, of the same apps on the MotoX that I had on the HTC. I have no apps on the MotoX that I didn't have on the latter.
As for some of the car-related suggestions, it's a 2015 Subaru Forester Premium 2.5i, which is really only level up from the base model of that line. I can't find that there is a bluetooth profile setting in the car that I can change; I think that it's too basic. The relevant user manual simply states the following:
Media format
Bluetooth audio devices cannot be
connected if they are not compatible with
the following Bluetooth® profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
I don't even know what either of those mean!
Anyway, what I did do is go to the phone settings, and uncheck the Media box that shows up once the car's BT server is detected. Then I try to connect with the Phone box checked. It'll still fail to connect several times, but (a) it doesn't take as long to fail to connect, (b) it doesn't take as many tries (it seems) to make the connection, and (c) when it fails, it fails totally, so I don't have to disconnect from 'Media-only Connected (No Phone)' connection. That makes it easier I suppose. Then once the connection is established, it's a simple matter to go back to settings, and check the Media box. That add-on connection happens pretty quickly, but the process is still a little overwrought, imo.
Of course, KidJoe, up until you mentioned a Headset Profile, I didn't know one existed. But when I try to play music on my phone using PowerAmp, well, the app doesn't hook up to the BT anyway. That's a key difference between the HTC and the MotoX. In PowerAmp, I have "Play over Bluetooth on Detection" selected. The headset isn't being detected at all. So maybe that goes some distance to explaining what I'm encountering.
Again thanks to both of guys for hanging in there with me! I'll keep trudging "onward through the fog," as it were...
cheers,
john
A2DP and AVRC are used for Bluetooth Stereo audio streaming (like playing Pandora on your phone via your car stereo). Not phone calls.
For phone calls, usually a Headset or Handsfree profiles are used, and sometimes BT Phone Book Access (so you can see your phone's contact names/numbers on the car's screen).
I've run into compatibility issues between some phones and some Headset/Handfree devices (mostly cars, but a few bluetooth headsets too). Often times when this happens, you're stuck. Each side will blame the other (i.e. Moto will blame the Subaru car stereo, and Subaru will blame the phone).
I have had issues re-connecting to my car (a 2011 Saab 9-4x with Bose/Nav), IF I had my Moto S11 Flex HD headset connected to my Moto X before I got in the car (even if the S11 was powered off/disconnected from the X before I started the car). Usually toggling the X's bluetooth off/on, and sometimes worst case rebooting the phone, has always fixed it.. Another time I had troubles connecting to my Saab's car kit was when my wife was using her phone to stream audio. The next time I got in the car, I had to manually connect my phone. The car always tries to connect to the the last phone used, so it was looking for my wifes and it took a while before it timed out. When it did time out, it didn't look for mine.
Since you have a 2015 Subaru, I would consider visiting your car dealer, ask them to help with pairing the phone properly, and making sure its working right. See what they have to say.
My bluetooth in my car stopped pairing the other day, and it turns out it was an app that updated and requested permissions related to bluetooth. I didn't notice them because it's an app I trust so I accepted the new permissions without really looking at it.
I used App Settings (Xposed module) to disable the permissions and my bluetooth works fine again.
I could still pair with things if I went to the bluetooth paired device list and manually tapped on the device I wanted to connect with, but it would not pair automatically (like when I got in my car). Once I disabled that permission, it started working again without issue.
May be worth a look through your installed apps to see if anything has access to bluetooth and may be interfering.
Hey All,
Thanks again for the continued help!
It's true, I didn't do any research on app interference before I posted this thread topic, but since a couple of you have brought it up, I decided to do a little research. I installed a permissions app, and took a look at the permissions that allows an app to automatically seek out, and pair with, Bluetooth servers. I have to admit, I got some surprises there. (Who would've thought that Beautiful Widgets needed that permission; it is now gone.)
Anyway, most of the remaining apps are either system/Moto-related, or ones I would really like to keep. I'll report back on what I learn. If there are other permissions that I need to reference besides the two pairing-connecting to Bluetooth ones please let me know...
cheers,
john