Database Develop

[Q] kabaldans CM10 nightly - some issues

hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol

mvol said:
hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
Click to expand...
Click to collapse
I have issue like this, and I can see IMEI and IMEI SV, but the Serial Number is "unknown".

after doing a full wipe, IMEI now shows up for me as well, but unknown serial and multipress problems remain.

mvol said:
hey folks,
(I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
Click to expand...
Click to collapse
You are almost at the 10th post.
Maybe wiping everything is a solution for that?

mvol said:
hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
Click to expand...
Click to collapse
Hi mvol,
I am running the new CN10 10/24, the seril reports also Unkown but it doesnt stop me from running and using WhatsApp app.
regards
EP

WhatsApp now works - it looks like the full wipe which solved the unknown IMEI problem also fixed WhatsApp.

mvol said:
WhatsApp now works - it looks like the full wipe which solved the unknown IMEI problem also fixed WhatsApp.
Click to expand...
Click to collapse
Realy ? I will have a try !

I also went through this and really soh after giving a factory reset was decided that in fact

have you guys tried multipress using the hardware keyboard? Does it work for you?

mvol said:
have you guys tried multipress using the hardware keyboard? Does it work for you?
Click to expand...
Click to collapse
here using the shift and alt is working normally above 2 keys simultaneous ... not tested on that specifically, you will use more than 2 simultaneous keys?

with "multipress" I mean the feature invented by nadlabak/kabaldan that allows one to press the same key multiple times very quickly to enter special characters (like pressing "a" two times very fast producing "ä", for example.) It worked perfectly for me in CM7, but it doesn't anymore in CM10...

anyone, please?

It works fine for me. I use it frequently.

mvol: I still haven't found the time to implement the multipress feature completely in CM10. Only a few of the final bits is missing. Please be patient.

thanks for your answer - in that case, I'll wait patiently

Link not working for me
Hi All,
Im unable to access the latest builds for milestone CM10 by kabaldan. Please can anybody provide alternate link?
Thanks

Hello people!
I'm a long time CM ( 6 and 7 ) user on my Milestone.
After updating it to CM10 ( full wipe, ext3 partition formatted ), adb does not find my device anymore.
I have changed the USB settings and enabled the debugger in development, but nothing changes. Even after a restart.
Running on Ubuntu 12.10.
Any ideas?
Thanks!

The issue I have is quite annoying, if I can use such a word in a development stage . After each restart, the network is being forgotten, so I have to switch to the airplane mod off and on.

@pt0: This is a known issue, if I can say that. I experience this too, though not after every restart. I think it's a problem we can live with.

[Q&A] [DAILY][UNOFFICIAL] Stock CM12 builds [31.12.2014]

Q&A for [DAILY][UNOFFICIAL] Stock CM12 builds [31.12.2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DAILY][UNOFFICIAL] Stock CM12 builds [31.12.2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

rooted and unlocked
inffy said:
New Build up @ OP
Should fix the phone fc.
Click to expand...
Click to collapse
mmm
https://plus.google.com/115164035530157900974/posts/iE3uL3ATA3W?pid=6098971328030833826&oid=115164035530157900974

supereos1 said:
mmm
https://plus.google.com/11516403553...6098971328030833826&oid=115164035530157900974
Click to expand...
Click to collapse
Next time you should make your post more informative and not have your first XDA post to contain 3 letters and a link.
Firstly, did you wipe?
Secondly, update your TWRP. Latest is 2.8.3.1, then try flashing again.

Two bugs I think I have found
First is the bluetooth, when playing music and receiving notification alert the volume will jack up and distort. Secondly Cast Screen will not detect my SmartTV although when I go to Setting>WiFi>Advance>WiFi Direct it will detect the TV but will not cast my to screen to the TV but works fine with Chromecast.

violentbydezign said:
First is the bluetooth, when playing music and receiving notification alert the volume will jack up and distort. Secondly Cast Screen will not detect my SmartTV although when I go to Setting>WiFi>Advance>WiFi Direct it will detect the TV but will not cast my to screen to the TV but works fine with Chromecast.
Click to expand...
Click to collapse
Both are known problems and hopefully will be fixed soon

Went back to stock and now I'm going to try this out again. Are we still flashing rom-gapps-su?

jadams212510 said:
Went back to stock and now I'm going to try this out again. Are we still flashing rom-gapps-su?
Click to expand...
Click to collapse
Yes

Saw in the main thread that others were experiencing the system ui crashes during the encryption unlock pin stage of bootup.
I had this too, but it did go away after I did a clean install (for unrelated reasons).

malcalevak said:
Saw in the main thread that others were experiencing the system ui crashes during the encryption unlock pin stage of bootup.
I had this too, but it did go away after I did a clean install (for unrelated reasons).
Click to expand...
Click to collapse
Apparently it comes back after your next dirty flash.

Anyone having issues with WiFi connection?
After 3 to 4 hours of standby , my WiFi says authentication issue but when I click on connect again , it connects fine
Having this issue on multiple routers

chowdarygm said:
Anyone having issues with WiFi connection?
After 3 to 4 hours of standby , my WiFi says authentication issue but when I click on connect again , it connects fine
Having this issue on multiple routers
Click to expand...
Click to collapse
Haven't noticed this kind of behaviour on mine. WiFi connects fine and the connection is keeping alive all the time

now i have the offcial encrypted CM, if i flash this one i got the phone unecryped or i need to wipe all?

EasyDeath said:
now i have the offcial encrypted CM, if i flash this one i got the phone unecryped or i need to wipe all?
Click to expand...
Click to collapse
If your phone is already encrypted it will stay encrypted. Only way is wipe userdata (backup your internal memory)

ok, when i'll have more time i'll try, hope i get some little boost on performance

[Q&A] [ROM][UNOFFICIAL][i9305] CyanogenMod 12 UNOFFICIAL BUILDS FOR I9305

Q&A for [ROM][UNOFFICIAL][i9305] CyanogenMod 12 UNOFFICIAL BUILDS FOR I9305
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UNOFFICIAL][i9305] CyanogenMod 12 UNOFFICIAL BUILDS FOR I9305. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

achrafi9305 said:
Very Very sorry guys for waiting ! but a good build us under developement now !
but my pc is having strange problem (this rom is unlucky) ! gonna try to fix pc and finish the build and upload!
Thanks
Click to expand...
Click to collapse
Hello, the next build will be experimental, alpha nightly or stable version ?
When will be upload ? I'm waiting for the rom

RayaneGti said:
Hello, the next build will be experimental, alpha nightly or stable version ?
When will be upload ? I'm waiting for the rom
Click to expand...
Click to collapse
Hi ! I cant answer your question because the next build isstill under development and needs to be tested to see how stable it is! and sorry for waiting ! I am still a new (developer) in addition to having technical problems!

No soucy
achrafi9305 said:
Hi ! I cant answer your question because the next build isstill under development and needs to be tested to see how stable it is! and sorry for waiting ! I am still a new (developer) in addition to having technical problems!
Click to expand...
Click to collapse
No soucy, congrulations for your project, i'm waiting for and i'm with you !!!

Test
+
1.Booting
2.Works
3.Looks like there is no glitches in Google Chrome
4.Stable 3G
-
1.Battery discharges even it is plugged to charger
2.No 4g( Maybe it is my provider problem
3.Signal is unstable

Hello
I'm currently testing this CM12 build of yours, and it seems to work great in general - but i do have some troubles with my data connection.
I can see that i'm not the only one, and for me it's a crucial that I have my data connection available when I'm not able to connect to a wi-fi.
I use LTE and sometimes it just disappears, and show an ! in the signal-icon - and then sometimes it reappears (as of right now, it just reappeared and started working, for no apparent reason)
I'm not sure what causes this, but i will look into possible reasons in the next coouple of days.
keep up the good work!
chrisroed

xposed
Could you test Xposed also on this rom?

tried installing the latest build (20150213) from winxusers website - now my unit wont go past the startup logo... did not try to wipe first though, wil ltry that now.

3g ist not working
Hallo thanks for this beatiful ROM.
3G is not working

3g no work the last update
Even without works 3g not understand why they say this repaired -.-

hello again
I did a full wipe and installed the 20150217 update. my device booted from that one, and is working somewhat ok. data connection (LTE) is still very dodgy, and will sometimes stop working without warning. I cannot replicate the error on purpose, and thus, I cannot tell you what the error is, exactly.
It might be when i move around and change connection to other antennas in my area - but I'm not certain.

3g is not working on the i9305n and someone also mentioned it not working in the UK

agni kernel
AGNI PureCM kernel is not working in this rom. . :/

Hello again
I've been using the latest build for some days now, seem to work quite good, but still have some issues.
Data connection is still not working 100%, I still lose the connection from time to time, with no apparent reason behind it. although I usually use LTE, I will try to test if manually setting it to 3G will help.
Video playback is awful. Colors are all wrong and the playback is laggy and slow to load. Sound seems ok though.
gps seems to work fine, it accurately found my position within a few seconds.
Nothing more from me, this time.
Keep up the good work!
chrisroed

For me, not working 3g with anyone config

3G does not work and some please tell that annoying andreazimba idiot to stop telling people that it does. There are people in various European countries stating the same thing. 3G does not function!

ash29k said:
3G does not work and some please tell that annoying andreazimba idiot to stop telling people that it does. There are people in various European countries stating the same thing. 3G does not function!
Click to expand...
Click to collapse
I agree ! We just loosing our time.

kanarex1 said:
I agree ! We just loosing our time.
Click to expand...
Click to collapse
Agreed, this annoying little 15yr old is slowing down the good work being done by devs by prompting them to avoid the main issue with this rom which is the non functional 3G.

ash29k said:
Agreed, this annoying little 15yr old is slowing down the good work being done by devs by prompting them to avoid the main issue with this rom which is the non functional 3G.
Click to expand...
Click to collapse
im sorry unfortunatly i cant seem to fix the 3g issue but there is some people saing if you set it to 3g only then it seems to work,, i dont know why some people have working 3g like me and others dont. but unfortuneatly theres no fix just yet

For me, absolutely no problem for 3G even if I stay on LTE prefered.

[Q&A] [ROM][5.0.2][SaberMod] Benzo Rom

Q&A for [ROM][5.0.2][SaberMod] Benzo Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][SaberMod] Benzo Rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Thank You!
This looks awesome! Thank You!!

dallas1164 said:
This looks awesome! Thank You!!
Click to expand...
Click to collapse
No problem. Hope you enjoy it.
Sent from my Nexus 6

[Req] Canadian people lookup for Dialer?
Hey, awesome work with this ROM. I'm a lurker but not new to flashing, just rarely post.
I remember on KitKat there being a few ROM's that had Canadian people lookup (Yellow/White Pages and another service) - any chance you could add this back in? It was one of the most useful features for people that get a lot of calls from strangers/clients.
Cheers mate!

Love the name Benzo, aka benzodiazapenes
I took xanny bars and had to taper off using Valium during my experimenting days, fun times. But ya so the audio doesn't work correctly when you plug it into an aux source. It plays the audio through the phones built in speakers instead of channeling the music through the auxiliary input

Gsidthekid said:
I took xanny bars and had to taper off using Valium during my experimenting days, fun times. But ya so the audio doesn't work correctly when you plug it into an aux source. It plays the audio through the phones built in speakers instead of channeling the music through the auxiliary input
Click to expand...
Click to collapse
I can also confirm that I get this as well.
Also the always on "Ok, Google" will not let me record, no matter how many time I have tried.

google Now
No longer working... anyone else having this issue?

Anyone have any idea why google now is not in the ROM? Is it a setting? Also...anyone having issues with changing DPI? Mine states 398...but does not look it. Thanks.
Sent from my Nexus 6 using XDA Free mobile app

Google Now launcher
I like this rom, the only thing stopping me from using it as my everyday driver is that I am unable to use the Google Now launcher. Is this a bug or intentally left off? Also is the new version built on LMY47E?

LMY47E radio
I flashed the latest radio and bootloader and it is totally worth it for the WORKING VoLTE and I feel the data connection or speeds are slightly stronger. In the Columbus Ohio area, and getting ~30 Mbps down and ~25 up

Ok, so anyone else got the dreammanagerservice wakelock? I've been using ambient display all the time without the wakelock, that is until the latest build.

I have a problem whit deep sleep, solution?
Thanks and good Rom!

mafiastyle said:
I have a problem whit deep sleep, solution?
Thanks and good Rom!
Click to expand...
Click to collapse
Download Disable service, choose System and Google play services. Enable system update. Helped me deep sleep.

lmy47m
Can I flash this over the t mobile version of 5.1

Can't flash rom
When attempting to flash the rom using TWRP 2.8.5, i get the error message "failed to mount /dev/block/platform/msm_sdcc.1/byname".
I have wiped data, cache and dalvik before attempting to install.
Edit: Turns out it did flash correctly. I just tried booting into system and it was successful, i just took that message as a bad thing

Exchange Problem
Hello, I'm running Benzo rom on my Nexus 6 and for some reason I cannot setup an exchange email through the Gmail app. It just force closes before it let's me set the email as a device administrator.
Thank you

Anyone else having major issues?
I love this ROM and I want to stick with it but i'm having some major issues.
1. My LTE on ATT wont work. It will sometimes connect but wont work until it goes back down to HSPA+ (Yes i'm on ATT LTE and have deleted the other APNs)
2. My device wont go into deep sleep. It's been awake since I have turned it on
3. Due to the last two, my battery is not good at all.
Anyone know any fixes?

Script for those having deep sleeps issues http://forum.xda-developers.com/google-nexus-5/general/script-google-play-services-battery-t3059585
Shamu/Hammerhead/Flounder Dkwhq www.jsand.dk

No OTAs by OpenDelta , someone else is wrong? Thanks
EDIT: Sorry, opendelta run!!

Can't change double tap to wake.
I've tried altering it in the settings and the kernel settings but the double tap to wake stays on.

[ROM][5.1.1][UNOFFICIAL] AICP v10.0 for m7spr [10.3.2015]

UNOFFICIAL AICP for the Sprint HTC One​
Since @superfes is no longer using this phone, I figured I would post some unofficial builds of AICP (Android Ice Cold Project). The previous thread is intended for closure, so we can use this one. To be clear, I'm only compiling this ROM and will not be troubleshooting specific issues. I will do my best to troubleshoot, but no guarantees. Any help on this front is appreciated - I'm new to this and am interested in continuing to learn.
I'm planning on putting together a build once every week or two for personal use and will share that with you guys.
Obligatory disclaimer: I am not responsible for any trouble you may run into with flashing or otherwise using this ROM. Just because it is working well for me does not guarantee that you will have the same experience.
For those of you wondering what AICP is: http://aicp-rom.com
Download link
10/3/2015: Google drive: https://drive.google.com/open?id=0B0lza8kzVL9RSVNnUzdoT0J5QWs
Build notes
10/3/2015
- Fresh build from 10/3
- Tested service / data when moving and no issues
- Remember that I am not troubleshooting specific issues. I'm not a developer. If you wish to post a logcat or anything like that though, feel free and I will take a look but not necessarily be able to provide a solution
- Yes, the digital roaming display is still there. In fact, when you see digital roaming, this is a sign that you are in service. 'Sprint' shows up when you are roaming so it is backwards.
9/27/2015:
- Didn't make clobber so build that hasn't been updated since 9/19 does not show an update (i.e. build will say 9/19 in many places since that was my last full repo sync). For future builds I will do this but didn't feel like waiting that many hours today
- Cherry-picked tdhite's commit from PAC ROM: http://review.pac-rom.com/#/c/13403/
------This has fixed the com.android.phone crashing problem + service being dropped
------ Usable as a daily driver again!
- From a full day on this ROM it's running smoothly and without errors
- 'Digital Roaming' display-only issue persists (been there for a long time now - no surprises here), and it is not indicative of actually roaming. Go into settings / about / sim status to definitively determine what your service status is.

Reserved
Reserved for now
Appreciate any feedback you guys have too

I'll give it a try and let you know.
Sent from my One using Tapatalk

wmatheney said:
I'll give it a try and let you know.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I couldn't get a solid connection. It was roaming and when I toggled the network type to global, I lost connectivity. I toggled back to CDMA/LTE but still no connection. I toggled Airplane mode. Still no go. I then changed it to Global and got a connection finally, but it was still roaming.
I hope this helps.
Sent from my One using Tapatalk

Same issue I've noticed everywhere, no proximity sensor feedback when in dialer!
I'm not pushing the power button every time I get called or I make a call. Only reason I'm still glued to 4.4.4.
Tjis is my 3rd m7 on kk and lp Ota, all 3 on both revisions, same issue.
Sent from my One using Tapatalk

wmatheney said:
I couldn't get a solid connection. It was roaming and when I toggled the network type to global, I lost connectivity. I toggled back to CDMA/LTE but still no connection. I toggled Airplane mode. Still no go. I then changed it to Global and got a connection finally, but it was still roaming.
I hope this helps.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
The digital roaming issue is cosmetic - that one's to be expected (see build notes; you are probably not roaming). As for the connectivity drop, I haven't run into that. If that's happening infrequently and you can deal with the display issue, this ROM should be otherwise fine for service-related actions (calls/texts) in my experience over the last couple of days.
swerff said:
Same issue I've noticed everywhere, no proximity sensor feedback when in dialer!
I'm not pushing the power button every time I get called or I make a call. Only reason I'm still glued to 4.4.4.
Tjis is my 3rd m7 on kk and lp Ota, all 3 on both revisions, same issue.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Yes, that one is pretty annoying. I have also noticed it on AOSP LP ROMs including this one and just deal with it. Sorry to hear that's holding you back. If there's a fix out there and I come across it, I'll be sure post about it and add to the ROM if applicable.

You can port camera stock m7?
http://www.apkmirror.com/apk/htc-co.../htc-camera-7-30-581119-android-apk-download/

Vember31 said:
Yes, that one is pretty annoying. I have also noticed it on AOSP LP ROMs including this one and just deal with it. Sorry to hear that's holding you back. If there's a fix out there and I come across it, I'll be sure post about it and add to the ROM if applicable.
Click to expand...
Click to collapse
Do you need a log cat when doing anything? Sensor programs show the proximity responding as expected.
Sent from my One using Tapatalk

First of all, great ROM! Have used AICP on my Nexus 4 and my TF300T in the past and it's always been a nice, stable ROM. Just got one question about non-market apps. I've been unable to install any, though I do have the option enabled in the Security menu. From what I've been able to tell, I can start the install of non-market apks with no problem but then the install screen closes by itself and once or twice, I've seen a pop-up that says something about Anti-piracy software activated. Is there any way around this?

So I need Gapps with this ROM?

How about MM?

Any aicp work?
Sent from my One using Tapatalk

Just wanted to stop in and say thank you for uploading this to the site. I have had a hard time finding a good daily driver and this is perfect for my needs.
If you are still building weekly for your own personal use i would greatly appreciate you uploading here as well.
Also I like the inclusion of more cpu governors such as smartmax_eps, has been great for pokemon go