Database Develop

Incipio Silicrylic and Moto Car Dock

I received my grey/white silicrylic case in the mail yesterday. It looks great and feels awesome, really is a pleasure to use.
My problem is, it just barely fits into the car dock (with the insert removed). It doesn't quite make enough contact with the charging port to charge, meaning it doesn't go into car dock mode (also, sits there and drains the battery). Has anyone else had the same experience (or the opposite)? Any idea where I need to hit the dock with my Dremel to make it fit? I can't quite tell where it's too tight.
Edit: Looks like it's on the bottom right corner as the dock is facing you... I think the acrylic part of the case is maybe 1mm too long for the dock. I'll try shaving that bit down a bit when I get home and see if that works.

I had the same issue with the HD Dock. Even tho others say they're silicrylic worked fine with the HD Dock, it was a very poor connection that would cause the webtop app to reset if i bumped the phone...and yes that was with the shim/insert removed.
As for the the Car Dock...it might be easier to cut the plug out of the dock so that you can raise it into a higher position and then use epoxy to set it back into place...or switch to a different case. I use Incipio's feather case now and I like it. Granted it doesn't offer as much protection...I just handle the phone more carefully than I've ever handled a phone before. It's too bad the hard shell of the silicrylic isn't easier to remove. if you're not careful, taking the shell on and off you'll eventually tear the silicone piece. Good luck.

Official word from Incipio is that the case is not compatible the dock. I'll show them...
Does anyone know how the bionic knows to switch to dock mode? I don't see a magnet inside the dock anywhere, and dock mode only seems to work when the power is on.
Sent from my DROID BIONIC using XDA App
Edit:
Broke out the Dremel this evening, trimmed off the lip that sticks out over the bottom right corner of the phone when it's on the dock, then expanded the hole through which the microusb charger comes so I could push it through about another millimeter so that it reaches far enough to charge the phone. I'm overall very happy with the situation. Kudos to Motorola for making the dock so roomy; I really had very little work to do to make this happen.
One very important thing I learned about cutting/sanding plastic with the Dremel - go with the slowest speed that will do the job. If you go too fast, you end up melting the plastic instead of cutting it or smoothing it, and it looks awful.

Charging Dock

Looks like AT&T is listing a charging dock for the Vivid now. Has anyone seen one in a retail outlet?
<< Can't post a URL yet, but if you google 'ATT HTC VIVID DOCK' you'll see the link >>
Sean

TimeOut42 said:
Looks like AT&T is listing a charging dock for the Vivid now. Has anyone seen one in a retail outlet?
<< Can't post a URL yet, but if you google 'ATT HTC VIVID DOCK' you'll see the link >>
Sean
Click to expand...
Click to collapse
It should be illegal to sell that for $50! I want one, but for $50??

TimeOut42 said:
Looks like AT&T is listing a charging dock for the Vivid now. Has anyone seen one in a retail outlet?
<< Can't post a URL yet, but if you google 'ATT HTC VIVID DOCK' you'll see the link >>
Sean
Click to expand...
Click to collapse
I saw that on their site, too. (LINK) At that price I'm going to pass and wait for the aftermarket ones to show up on eBay.
-Brett.

Has any one tried this dock, just wanted to see if it would work if I had a case around. The last time I got one for Desire HD it fit perfectly but then I could not use a hard/soft case.

Well call it a test.
So, although there are not any charging docks out there for the HTC Vivid, there are charging docks out there for similar phones. That being said, I'm going to purchase this...
generic looking charging dock​...for the HTC Thunderbolt and see how well it works. I figure I might have to give it some support in the back, but all in all it should be a good fit, not to mention the extra battery charging slot will be useless. I'm also going to pick up one of these...
window mount charging docks​...and modify it so the Vivid will fit. The Vivid is .2" wider than the thunderbolt, so I figure it'll just make for a more tight fit.

charging dock and Car Mount
I bought few months ago this car mount (Exomount) from Amazon, I use 2 of them one at home and one in the car, It can hold anything so I use it as dock station too, So far it never failed me I drive around 6 hrs a day and its always sticked to my windshield never had problem with it, plus its cheap $ 15 sorry cant post links just search at Amazon "Exomount Universal Car Mount".

Vivid and dock or on the way from AT&T. Will post pics ASAP and answer any questions. I work for AT&T so I will report back on which cases still fit in the dock, if any, that we sell.
Sent from my Atrix 4G

propofokgov said:
So, although there are not any charging docks out there for the HTC Vivid, there are charging docks out there for similar phones. That being said, I'm going to purchase this...
generic looking charging dock​...for the HTC Thunderbolt and see how well it works. I figure I might have to give it some support in the back, but all in all it should be a good fit, not to mention the extra battery charging slot will be useless. I'm also going to pick up one of these...
window mount charging docks​...and modify it so the Vivid will fit. The Vivid is .2" wider than the thunderbolt, so I figure it'll just make for a more tight fit.
Click to expand...
Click to collapse
As an update to my original post, I received the window mount that I listed and after cutting off the far left side (the part the wraps around the top corner of the phone) it fit perfectly and it initiates the car mode when I put my phone in. The only downside is that it doesn't work with my TPU case in, but I think I have a plan to fix that

propofokgov said:
As an update to my original post, I received the window mount that I listed and after cutting off the far left side (the part the wraps around the top corner of the phone) it fit perfectly and it initiates the car mode when I put my phone in. The only downside is that it doesn't work with my TPU case in, but I think I have a plan to fix that
Click to expand...
Click to collapse
awesome, if you can, some pucs would be nice

zombie.raised said:
Has anyone tried this dock, just wanted to see if it would work if I had a case around. The last time I got one for Desire HD it fit perfectly but then I could not use a hard/soft case.
Click to expand...
Click to collapse
In a weak moment, I coughed up the $50 for this dock. At lease it comes with another wall-to-USB plug and a micro-USB cord. It works great, but I don't use a case. It is a snug fit. I doubt that it would work with any but the thinnest cases (without modification).

do you have a dock that automatically enters dock mode?
Does anybody have a dock, Car or Desk that automatically places the phone into dock mode? As I understand it other docks use a resistor between pins 4 and 5 to place the phone into dock mode. If you have a dock that automatically places your phone into dock mode, could you measure the resistance between pins 4 and 5. I've tried the 365K ohms suggested in another thread but it does not seem to have any effect.
Thanks.

I will try and post this tomorrow.

I have a resistance substitution box so I ran through a bunch of values. What I found is from about 12K to 9.8K Car Dock Mode is selected. From 1000K to 500K Desk Mode is selected. So I selected 10K for Car Mode and build a cable that seems to work. For Desk Mode I'd like to use 680K.
Then again. looking at these numbers I'm not too sure about the Desk Mode numbers I think they may be off by an order of magnitude, so I'm going to run those tests again. Ignore the Desk Mode number for now.

Bought the dock from AT&T (online) today after I got tired looking for one. Free 2 day shipping plus the cords included so that helped feel not so bad for it. I'll let yall know if it fits with the TPU case.

I just made this makeshift stand for mine for free with little materials.It may not be the prettiest but it does the job.Im going to glue rubber to the bottom and fill it with something heavy like sand or lead tomorrow.Works great here at home!Beef Jerky can,zip ties,and paper clips.Works for now!I decided to use the can so my volume button can be placed at the top while plugged in.Holds it in landscape or portrait mode.

^ lol
I was supposed to get a free Titan but the store screwed up, I had already bought a cheap titan dock from ebay for like 9 shipped. fits the vivid great!

HEHE!
Will any of these docks work with this otterbox commuter case?Let me know if anyone tries one.Thanks!

i have an otter box defender for my vivid. will it fir on the desk/car dock while in the otter box?

woodsytattooman said:
HEHE!
Will any of these docks work with this otterbox commuter case?Let me know if anyone tries one.Thanks!
Click to expand...
Click to collapse
StoneyBK said:
i have an otter box defender for my vivid. will it fir on the desk/car dock while in the otter box?
Click to expand...
Click to collapse
Nope. It won't even fit in with the TPU case.

travisxcore said:
Nope. It won't even fit in with the TPU case.
Click to expand...
Click to collapse
Thanks Man!

Dock and other accessories for Nexus S with a case

Hey guys
I tried looking it up anyone know any good dock and other accessories that fit nexus s with a case (the really thin feather one)?

b ump

Anyone try either of these ??
This might work with a case
http://www.ebay.com/itm/Sync-Charge...ccessories&hash=item43ad96c95f#ht_2842wt_1140
This should definitely work.
http://www.ebay.com/itm/Sinjimoru-S...Accessories&hash=item3370c96d7e#ht_2273wt_982

Dock is a problem
I don't really think that you need a case. You can always change the back cover of your nexus s from time to time. And the screen is very good, mine doesn't have any scratch. Take a look at this link:
http://www.ebay.com/itm/NEW-GENUINE-ORIGINAL-HOUSING-BATTERY-BACK-DOOR-COVER-SAMSUNG-NEXUS-S-i9023-/160697790437?pt=LH_DefaultDomain_0&hash=item256a55afe5#ht_1248wt_1037
About the dock, nexus s do not have a multimedia dock like Motorola atrix, for example. The dock only charges and holds your phone. Even this being said I have a dock just like the one in the link bellow. It's good to have at work, you always have your phone charged.
http://www.ebay.com/itm/Original-Samsung-Nexus-S-Multimedia-Destop-Dock-D720-i9020a-Retail-/230740759228?pt=PDA_Accessories&hash=item35b93892bc#ht_922wt_1037
Remember to click the thanks button if you think I helped.

AnimeLoverX said:
Hey guys
I tried looking it up anyone know any good dock and other accessories that fit nexus s with a case (the really thin feather one)?
Click to expand...
Click to collapse
I bought a cheap dock. My nexus s almost fitted with the case on. Took it to myself to disassemble the dock, heat the region around the port and move it slightly and angle it a tad differently. After letting it cool and putting back some hot glue it fits perfectly. ;-)

[Review] Aerios Moduul Smartwatch Dock (LG G Watch R)

Aerios makes the best Smartwatch Docks, IMHO. I ordered it and the package arrived today. Just a few days after ordering. I'm in the USA and they are in Australia. It was shipped FedEx Express. Keep in mind, the amount shown on the web site is Australian Dollars, not US Dollars. So do the conversion, and the dock + shipping probably costs far less for most of you. Don't let the displayed price give you sticker shock .
The dock comes in a nice box, with an additional 3 foot charge cable. Either the supplied cable or another can be used. The hole in the dock for a microUSB is big enough for any I have ever seen. But the supplied one fits the most snug and fills the full whole. In the photos, I'm using a Blackberry MicroUSB charger.
Far as types they offer. Although they have Black with Walnut and Silver with Oak, the Silver with Oak is the only one in stock today.
The bottom of the dock, has a pad with a plastic cover. If you remove the plastic, there is sticky stuff on the bottom, in case you want to hold the dock in place on a desk. You have to supply your own round charger dock, to insert in the wooden circular cut out, and you need your own USB power plug to use with the cable.
I've attached many pictures, which I hope tell the story best.
I'll be happy to answer any questions.

I also received mine yesterday, really a quality product! The only issue I have is that my leather (closed) watch strap is a little too stiff and a too heavy: it "pushes" the watch a little away from the pins ... so I guess I have to manually modify the stand (top and bottom chamfered) in order to keep my watch connected. Do you also experience that problem?

Troxelke said:
I also received mine yesterday, really a quality product! The only issue I have is that my leather (closed) watch strap is a little too stiff and a too heavy: it "pushes" the watch a little away from the pins ... so I guess I have to manually modify the stand (top and bottom chamfered) in order to keep my watch connected. Do you also experience that problem?
Click to expand...
Click to collapse
See the strap in the photos showing my watch. I replaced the strap.
I've never been a real "fan" of LG's pin charger dock. I've had issues positioning things right, even on a flat surface. It takes a moment to position things "just right" in the Aerios dock, but it looks so sweet once in place. I don't blame Aerios, since I had issues with positioning before getting their dock. My strap does not cause the watch to fall off though. The stock leather strap is a bit heavier. Just make sure you position things well. I would not buy a new strap just to test if it works better if I were you.

I just got Wear Charging Widget and it looks really nice on the dock. Also, here's a related article about the widget. It is the only thing I've found that keeps the watch showing anything the entire time it is charging.

Darnell_Chat_TN said:
I just got Wear Charging Widget and it looks really nice on the dock. Also, here's a related article about the widget. It is the only thing I've found that keeps the watch showing anything the entire time it is charging.
Click to expand...
Click to collapse
Just got my silver version in. Ordered earlier this week and just got it today. FAST from AUS to TX, USA!! I think the shipping alone cost a good penny lol. For my take....the stand is very very well done. I also picked up the shapeways one last month. And to compare, this one is much more polished but because I use a lot of third party watch bands on my LG G Watch, the current band kind of pushes the lg dock charger out a bit. Whereas the one I have at home has a deeper cavity to house the lg charger and the angle on this is a tad too vertical. I need to grab some double sided tape to hold into place.
I have my Brembo stick that works a bit better for $20 bux lol. But doesn't look as good lol. Do I like it? Yes, would I recommend it? for $60 bux shipped, I want to say...I'm on the border on this. If you like the look of it, then go for it. I am ok with it. It somewhat matches my desk a bit at work. But I would recommend the Shapeways one for sure. I use that every night without issue.

Alternate 22mm straps?

Anyone replace out your strap/band yet? How does it look?
Sent from my Nexus 9 using Forum Fiend v1.3.3.

Yep, hated the stock band. I purchased this one... http://www.amazon.com/gp/product/B001EYVBJA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Super quick review... Matches the watch like it was built for it. I've had this brand before and it held up well which isn't surprising, it feels like a piece of decent quality. Quicker to take on and off and less likely to drop your watch which is true all of straps of this type versus a buckle. Regrets = zero.

Sweet! I just ordered one too....
Sent from my SM-G925T using XDA Free mobile app

krabman said:
Yep, hated the stock band. I purchased this one... http://www.amazon.com/gp/product/B001EYVBJA/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Super quick review... Matches the watch like it was built for it. I've had this brand before and it held up well which isn't surprising, it feels like a piece of decent quality. Quicker to take on and off and less likely to drop your watch which is true all of straps of this type versus a buckle. Regrets = zero.
Click to expand...
Click to collapse
I wonder if they make that one in the rose gold that matches the gold Urbane. I will have to look into that...

I purchased these 2:
DASSARI Concord Black w/ White Stitching Croc Leather watch Band for BREITLING 22/20 22mm https://www.amazon.com/dp/B00OC77BR2/ref=cm_sw_r_awd_Ctssvb0JQAJAR
Ritche 22mm Stainless Steel Bracelet Watch Band Strap Curved End Solid Links Color Silver https://www.amazon.com/dp/B00DKYC93E/ref=cm_sw_r_awd_fvssvb1V69QNZ

TriadX1 said:
I wonder if they make that one in the rose gold that matches the gold Urbane. I will have to look into that...
Click to expand...
Click to collapse
Its much easier to match up the stainless than various gold, rose, graphite, ti, etc. bands/straps/bracelets. I would consider taking it to a larger shop where they have a good inventory and try to match it up.

http://www.amazon.com/gp/product/B005K2R4IO/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 This was the wand band I ordered when I bought the watch. It matches the watch perfectly. I attached some pictures below.

I am curious about how you charge the watch with a metal band. Could someone please post a picture of your watch on the stock charger to show how you do it?

just ordered this
Hadley Roma 18-22mm Squeeze End Link Men's Deployant Stainless Metal Watch Band
http://www.ebay.com/itm/371296668278

JimSmith94 said:
I am curious about how you charge the watch with a metal band. Could someone please post a picture of your watch on the stock charger to show how you do it?
Click to expand...
Click to collapse
The magnet is strong enough to hold the charger to the phone in most any position including the watch laying on its side. You can do it however you want.

Got the SUPER engineer Type II based on reviews
Amazon item B00CSE7IJ2
I know it seems like it's a bit pricey compared to others like the Hadley Roma but I'm super impressed with the quality. It's very heavy and the edges are not rounded over like it was mass produced. The links that can be removed for sizing have screws and they are super easy to adjust. I also like the buttons on the flip part of the band closure.
$72 bucks is still a hell of a lot cheaper than those rip off apple metal bands. Can't imagine them being any higher quality than this.
Important note: the 2.5mm fat boy pins that come with this larger band do not fit into the body of the LG Urbane because the lugs or tips are 0.8mm instead of the tiny ones that came on the existing leather strap band. For now, I'm using the pins that came with the watch, which are standard 22mm, but with smaller lugs. I could not find another vendor who made a 2.5mm pin with smaller tips since these larger bands are designed to go on Seiko's or diving watches.
Update: My plan is to put the fat boy pins that came with the watch in my dremel and use a micro diamond file ($13 on amazon) to reduce the lug down to a diameter that works in the Urbane. I will post an update if it works out and post links to the files I bought. Don't see why it wouldn't work and I don't think there is any other choice if you want to utilize the fat boy pins...which I do.
Stay tuned...pics coming.
Peter

ptchan5, could you explain in greater detail the Fatboy 2.5mm lug and LGs .8mm tips?
Keep us posted in the project

Anyone here thinking of going with a dark brown aligator band with the silver watch?
I would love to here what you guys think... or am I the only one not going with the metal braclet.

why_999 said:
Anyone here thinking of going with a dark brown aligator band with the silver watch?
I would love to here what you guys think... or am I the only one not going with the metal braclet.
Click to expand...
Click to collapse
I like this also.
Metal bands are not my thing.

Fat boy 22mm Spring Pins MOD
This is a follow-up to my previous post.
I used a dremel to reduce the diameter of the lugs on the 2.5mm fat boy spring pins that come with the heavy diver watch metal bands. I searched high and low and I believe all the thick spring pins come with 0.8-1.0mm lugs at the tips which are too big for the body of the LG Urbane. Turns out the pins that come with the Urbane are actually smaller than the holes in the watch body, but the fat boy pins are just a wee bit too large.
This MOD took about 5-8 minutes to do and worked perfectly! Now you can use the spring pins that were supposed to go with the larger metal band.
All you need to do is insert the spring pin into the dremel about half way and turn the dremel on to low setting. I bought the cheapest set of micro files I could find on Amazon Prime for $14 bucks and I ended up only using a single file out of the set. The one I used was the 90 degree square one so I could easily just hold it up to the lug for a minute or two and moved it forward and backward while watching the lug leave metal residue on the file. The 316L stainless steel pins are not soft metal! So it's nearly impossible to mess this one up. Once I got the pins to be reduced down in size visually I tested them in the watch before proceeding to do the rest of the pin ends.
Again, don't waste your time searching ebay or Amazon for 2.5mm pins with smaller lug pins. They don't exist. Besides by the time you buy them and find out they don't work you could have owned a nice set of micro files and been done with the MOD on the original pins that shipped with the watch band.
Very happy with the results. Ping me if none of this makes sense. Enjoy!
** Apparently can't post the pics, so ping me and I'll email them to you; maybe someone else can post them for me **

I think I'm going to go with this one
http://www.amazon.com/gp/aw/d/B00RF...olid=3U4N5O4C10O74&coliid=I34CDQ7SASFQ76&vs=1

graffixnyc said:
I think I'm going to go with this one
http://www.amazon.com/gp/aw/d/B00RF...olid=3U4N5O4C10O74&coliid=I34CDQ7SASFQ76&vs=1
Click to expand...
Click to collapse
That one has the cutout for the Moto 360. You don't need that for the Urbane.

JimSmith94 said:
That one has the cutout for the Moto 360. You don't need that for the Urbane.
Click to expand...
Click to collapse
That's not a factor for me. I'm getting that one because I liked the design best. I'm sure it would fit the urbane just fine.

I'm not much of a watch geek and have never paid too much attention to what strap I'm using. I used a NATO strap with my Pebble and the original straps with both my Pebble Steel and LG G Watch R.
However, I keep reading how uncomfortable the Urbane's strap is and it got me thinking: could I use the one in the Watch R with the Urbane? I find that one pretty comfortable.

Gorgeous!
Finally received my new metal bracelet and it beats anything I have ever seen, it really makes my watch look fair superior than even an apple watch