I have an unlocked and rooted HTC One M7, which I just updated to the latest version of android via an OTA update.
I used the process I always use for this, by reverting back to the stock recovery, then doing the update.
Even though the update completed, the initial boot after the update won't complete anymore. I am stuck at the HTC One Boot-logo.
I know that it usually takes longer to boot after an update, for the first time. However I have waited 60+ minutes now and it still did not move on.
Some more detailed information:
- Unlocked bootloader
- S-OFF
- H-Boot: 1.61.0000
- Radio: 4T.35.3218.16
- Version-Main before update: 7.18.161.2 (This is also the stock recovery I pulled and flashed before doing the OTA)
- Version-Main after update: 7.18.161.21
- CID: VODAP110
- Variant m7_ul unlocked / international
What I have tried:
1st As mentioned above, re-flashing stock recovery, update -> No boot
2nd Recovery from an older nandroid backup, made on the previous version, so 7.18.161.2. After recovering, my device worked fine again, like before the update. HOWEVER: The system version (inside the OS, aswell as adb and bootloader) still showed 7.18.161.21, which should be the version AFTER the update. It still tells me that I need to update my phone though.
3rd Since then I have tried to re-flash the stock recovery, this time the one for 7.18.161.21, since it showed me I was on this version. Again, the update completed without any hickup, but it is now stuck at boot again.
PhilDrummer said:
I have an unlocked and rooted HTC One M7, which I just updated to the latest version of android via an OTA update.
I used the process I always use for this, by reverting back to the stock recovery, then doing the update.
Even though the update completed, the initial boot after the update won't complete anymore. I am stuck at the HTC One Boot-logo.
I know that it usually takes longer to boot after an update, for the first time. However I have waited 60+ minutes now and it still did not move on.
Some more detailed information:
- Unlocked bootloader
- S-OFF
- H-Boot: 1.61.0000
- Radio: 4T.35.3218.16
- Version-Main before update: 7.18.161.2 (This is also the stock recovery I pulled and flashed before doing the OTA)
- Version-Main after update: 7.18.161.21
- CID: VODAP110
- Variant m7_ul unlocked / international
What I have tried:
1st As mentioned above, re-flashing stock recovery, update -> No boot
2nd Recovery from an older nandroid backup, made on the previous version, so 7.18.161.2. After recovering, my device worked fine again, like before the update. HOWEVER: The system version (inside the OS, aswell as adb and bootloader) still showed 7.18.161.21, which should be the version AFTER the update. It still tells me that I need to update my phone though.
3rd Since then I have tried to re-flash the stock recovery, this time the one for 7.18.161.21, since it showed me I was on this version. Again, the update completed without any hickup, but it is now stuck at boot again.
Click to expand...
Click to collapse
You are confusing software and firmware version. When installing an ota update, both the software and firmware are updated. Nandroid backups doenst include the firmware, flashing one will only restore the software. So you are restoring a .2 software on a . 21 firmware.
Anyway you have soff just flash the latest ruu available for your phone and then update it
alray said:
You are confusing software and firmware version. When installing an ota update, both the software and firmware are updated. Nandroid backups doenst include the firmware, flashing one will only restore the software. So you are restoring a .2 software on a . 21 firmware.
Anyway you have soff just flash the latest ruu available for your phone and then update it
Click to expand...
Click to collapse
I have tried finding the correct RUU, but I am getting a little confused with the available ones. When selecting the RUU, is only the variant of the phone important (so unlocked in my case) or do I have to match everything, as in CID, Carrier etc.? Because I cannot seem to find one that has matching information, except for the variant.
PhilDrummer said:
I have tried finding the correct RUU, but I am getting a little confused with the available ones. When selecting the RUU, is only the variant of the phone important (so unlocked in my case) or do I have to match everything, as in CID, Carrier etc.? Because I cannot seem to find one that has matching information, except for the variant.
Click to expand...
Click to collapse
7.18.161.2 is the first ruu posted in this thread
alray said:
7.18.161.2 is the first ruu posted in this thread
Click to expand...
Click to collapse
Wow, sorry I somehow didn't manage to find that :angel:
Thaks a lot!
Btw, since you said the firmware is not included in a Nandroid backup, if I create one now, do the whole procedure and if something fails, re-flash the nandroid, should everything still be working fine just as it is now? I'm guessing yes, right?
Also: If I now flash the ruu, deleting all data etc in the process, and then update, I won't have any option of re-aquiring all my data/settings either, right?
So in the end effect, this update will basically "flush" my phone
Same problem
Hi
I experienced the same problem while updating from 7.18.161.2 to 7.18.161.21. My bootloader was unlocked l, S-on and flashed stock recovery before I did the OTA. This procedure was working fine since a long time. Unfortunately this time I got stuck at the HTC boot logo, same as OP.
After flashing the RUU, locking the bootloader (this I guess was the important step) and do the OTA again, it finally worked. Too bad I lost all my precious data. Yeye backup I know
Im really aware of unlocking my bootloader again and have the same problem the next time they might release an update.
Now my question is, did HTC or my Carrier (Swisscom) changed anything in the update procedure?
Regards
red1337
red1337 said:
Hi
I experienced the same problem while updating from 7.18.161.2 to 7.18.161.21. My bootloader was unlocked l, S-on and flashed stock recovery before I did the OTA. This procedure was working fine since a long time. Unfortunately this time I got stuck at the HTC boot logo, same as OP.
After flashing the RUU, locking the bootloader (this I guess was the important step) and do the OTA again, it finally worked. Too bad I lost all my precious data. Yeye backup I know
Im really aware of unlocking my bootloader again and have the same problem the next time they might release an update.
Now my question is, did HTC or my Carrier (Swisscom) changed anything in the update procedure?
Regards
red1337
Click to expand...
Click to collapse
They will probably not have anymore updates but to install one you need:
stock recovery of the same firmware version or from the ota update version
stock /system partition (any missing/modified/corrupted files on this partition will makes the ota install fail)
stock /data/preload (any missing/modified/corrupted files on this partition will makes the ota install fail, unlocking the bootloader wipes everything in this folder)
More details here:http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9
Related
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
WARNING: i'm the second owner of the phone. For warranty I would have had to send the phone to HTC. I suspect the HTC warranty won't apply to me anyhow. I suggest that in this situation, people just get the phone fixed on warranty if they have that option
First Steps:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ? (SEE UPDATE BELOW)
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ? (SEE UPDATE BELOW)
Thanks in advance !
same issue
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
LRail said:
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
So far:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ?
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ?
Q3) If I eventually decide to install the Developer Edition firmware.. will the phone be effectively be a Dev phone ? (OTA updates... factory recovery/locked bootloader... no ID issues in the future..)
Thanks in advance !
P.S. For pure curiousity.... Am I correct in believing that revone can't clear the "tamper" flag and lock the bootloader with the custom recovery ?
Click to expand...
Click to collapse
double post
omgkush said:
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
Click to expand...
Click to collapse
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
LRail said:
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Click to expand...
Click to collapse
Tampered will come back the second you flash a recovery. Best to stay S-OFF
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
ysl00 said:
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
Click to expand...
Click to collapse
Thanks for the heads up. If I get a bunch of free time I may just test that after doing a new full backup.
Not sure about the Rogers 4.3 OTA.
I'm running currently the phone with Developer Edition ROM+CID and can confirm that it's 4.3 OTA updates hboot to 1.55.
After the update my phone is still s-off.
I have previously rolled back to an older hboot via a firmware flash.
Since the phone is still S-OFF, I assume I can do that again if needed.
EddyOS said:
Tampered will come back the second you flash a recovery. Best to stay S-OFF
Click to expand...
Click to collapse
Thanks For the reply Eddy.
Recovery flashing sets the tampered flag even if it's a factory recovery from an OTA being flashed ?
I agree on the S-OFF normally.
This was a test to see if I could get it back to full stock for warranty if needed, and S-OFF would not be acceptable in that case.
please help!
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
millarrjm said:
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
Click to expand...
Click to collapse
Esposition said:
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
Click to expand...
Click to collapse
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
re.
LRail said:
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
I tried that. CWM version 6.+ doesn't save to the backup folder anymore. And won't read a restore I put in it either... Ie. The rogers off the bugzylawson site.
bklam said:
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
Click to expand...
Click to collapse
Hello bklam,
Sorry, I missed your question.
No. I used CWM only to restore the "Whampahoofus"' nandroid backup.
That backup is "almost" 100% stock. Unfortunately it contains a custom recovery and won't (in my experience) work for normal OTA updates.
To solve this I decided to extract the factory firmware from one of the old Rogers OTA ("unrar" will extact the files from the OTA), and flash that.
To flash it I used the quick instructions in the 1st post of this thread-->http://forum.xda-developers.com/showthread.php?t=2182823
(I believe there were more details instructions on firmware.zip flashing in another thread but I can't find it at the moment)
Note to other readers: There can be confusion about the word "firmware". Some people use it describe the Rom.
In this case, I'm referring to the hboot, boot and recovery images in a single special file called firmware.zip. I believe in some cases it can also include the radio software too.
If I ever get a chance to get this 100% tested and figured out, I'll post a step by step method.
At this point it's just a overview of what I tried, and looking for other members advice.
Unfortunately, as you can see from my posts, it didn't work 100% for me. It gave me the stock Rogers HTC One Rom/software with OTA updates, but the bootloader still had the tampered flag.
Check out ysl00's post above. He/She evidently had it working 100% without the tamper flag.
Not sure if Rogers has a 4.3 OTA yet, but that might fix the flag since it includes a firmware update along with the OS update.
Post back with your results !
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
figured it out.
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
millarrjm said:
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
Click to expand...
Click to collapse
Sorry about that. No I didn't see it until just now. I guess thats the problem with having 20 browser tabs open at once. hehe
millarrjm said:
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
Click to expand...
Click to collapse
Good to hear. I read your post. I thought..."Is he using a root file manager ?" then read your next post….
I was also going to suggest a guaranteed way to determine where the CWM backups are being stored on a phone.
This way it doesn't matter which version of CWM, which phone or if the back directory exists yet.
Simply create a test backup and see where it goes. Then copy the Nandroid backup that you want to restore, there.
I should mention that I'm currently running my phone as a Developer Edition (Brightstar) 4.3 with OTAs, S-OFF, and unlocked.
It's works perfectly. Only the Carrier ID (CID) needed to be changed. The MID is the same.
I assume that a brightstar RUU will work on it now, even if the phone was locked and S-ON.
I have a few more things I want to tweak on it, then I'll likely make a backup and try restore it to stock rogers again so that I can create a clear how-to.
What's interesting, is that the Developer Edition OS seems to be the same as the Rogers Edition OS (without the rogers apps which can be uninstalled).
The only reason I think it might be a better choice is that the Dev Edition should get OTA updates earlier than the Rogers Edition.
I tried the custom Viper Rom 2.6.x but couldn't get an LTE connection. I suspect that was due to APN settings, but I didn't confirm that.
Anyone got the Viper Rom fully working on a Roger HTC M7 ?
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Esposition said:
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Click to expand...
Click to collapse
The OTAs don't work with custom recovery. You need the factory recovery
I am relatively new to the HTC. I am running a Stock rooted image with TWRP 2.6.3.0 recovery.
The OTA for 4.3 came down and whenever I start the install the phone reboots and ends up in twrp recovery and I do not know where to go from there. I tried searching the forums but the search is down at the moment.
Here comes the Noob question : A little help please as I am not sure where to go next?
I just asked almost the same question. One thing everyone says is don't take the OTA update.
I found a few places with the pre-rooted stock ROM update, but it does not include the firmware update, that is a separate flashable zip, but I'm not sure how to update the "Full Firmware w/o hboot, boot, recovery" without S-off. I don't know if doing the "full firmware update" will mess up my recovery/root.
http://forum.xda-developers.com/showthread.php?t=2467607
http://forum.xda-developers.com/showthread.php?p=46110767
generosity21 said:
I just asked almost the same question. One thing everyone says is don't take the OTA update.
I found a few places with the pre-rooted stock ROM update, but it does not include the firmware update, that is a separate flashable zip, but I'm not sure how to update the "Full Firmware w/o hboot, boot, recovery" without S-off. I don't know if doing the "full firmware update" will mess up my recovery/root.
http://forum.xda-developers.com/showthread.php?t=2467607
http://forum.xda-developers.com/showthread.php?p=46110767
Click to expand...
Click to collapse
I have been all over the forums looking at this and came up with squat.
If I take the OTA will I loose root? Can't seem to find an answer to that.
I was running an earlier version of twrp and thought that might be the issue but after updating twrp I am still at the same place. The sprint update notifications are still coming.
If I find something I will post it here.
Must be on stock firmware and recovery to take the update guys.... It has been posted numerous times. You must also ahve the stock kernel.
Yes you will lose root if you take the OTA, you always do. Also TWRP appears to be broken with 4.3, no responsive, etc, etc
jziggy101 said:
I am relatively new to the HTC. I am running a Stock rooted image with TWRP 2.6.3.0 recovery.
The OTA for 4.3 came down and whenever I start the install the phone reboots and ends up in twrp recovery and I do not know where to go from there. I tried searching the forums but the search is down at the moment.
Here comes the Noob question : A little help please as I am not sure where to go next?
Click to expand...
Click to collapse
you can't flash the update with custom recovery installed, you need thev stock recovery image which is posted numerous times in this forum
jziggy101 said:
The OTA for 4.3 came down and whenever I start the install the phone reboots and ends up in twrp recovery and I do not know where to go from there.
Click to expand...
Click to collapse
You have to have stock recovery to take the OTA
generosity21 said:
I just asked almost the same question. One thing everyone says is don't take the OTA update.
Click to expand...
Click to collapse
You can take the OTA if you are prepared for, and know what to do - also, don't take it if you are currently S-ON and ever want S-OFF because it comes with a new hboot.
jziggy101 said:
If I take the OTA will I loose root? Can't seem to find an answer to that.
Click to expand...
Click to collapse
Yes, you will probably lose root unless you are using the OTA preservation function of SuperSU and it works for you, but either way, it is easy to get it back.
Bottom line, how you take the OTA depends on whether you are S-ON or S-OFF, the latter is much easier. Assuming you are S-ON and running the Sprint stock ROM, here is what you need to do.
1. Flash stock recovery.
2. Lock the bootloader
3. Take the OTA update
4. Unlock the bootloader
5. Flash custom recovery (TWRP)
6. Flash root (SuperSU)
If you are S-off you can skip numbers 2 and 4.
Aldo101t said:
you can't flash the update with custom recovery installed, you need thev stock recovery image which is posted numerous times in this forum
Click to expand...
Click to collapse
Thanks for the replies. It's very confusing whether people are referencing the OTA update, or the tweaked, rooted downloadable update (http://forum.xda-developers.com/showthread.php?p=46110767). This forum should be friendly to questions when things are confusing.
Even with the two replies on this thread, it's still not clear to me if the downloadable (NOT OTA) updates can be flashed with a custom recovery, or what the procedure is for an S-On device regarding firmware and ROM updates. Sorry to offend anyone if they feel this has been answered somewhere in the forums, but it's still unclear to some of us.
EDIT:
@PillowMetal Thanks for the very helpful reply. I guess the next question is, is it possible to get S-Off on 1.31.651.2 without losing everything?
Kraizk said:
Must be on stock firmware and recovery to take the update guys.... It has been posted numerous times. You must also ahve the stock kernel.
Yes you will lose root if you take the OTA, you always do. Also TWRP appears to be broken with 4.3, no responsive, etc, etc
Click to expand...
Click to collapse
If your not stock ota will mess you up big time. I just rooted my HTC one on sprint with the update that was on a swap out for bad speakers . Twrp isn't responsive if you use the one in toolkit. I downloaded 2.6.3 loaded it in the data folder of toolkit installed through the toolkit and bam... I got response out of Twrp. I'll find the link and post for you guys.
Sent from my SGH-M919 using Tapatalk 4
generosity21 said:
@PillowMetal Thanks for the very helpful reply. I guess the next question is, is it possible to get S-Off on 1.31.651.2 without losing everything?
Click to expand...
Click to collapse
Not without losing everything because it requires tricking your bootloader by writing to your misc partition, then running the 1.29 RUU - http://forum.xda-developers.com/showthread.php?t=2390821
http://techerrata.com/browse/twrp2/m7wls
This is the link for people who are stock and unlocking their phone. If you're using the toolkit put it in the data folder and rename to twrp. Be careful though the other files are the same name but in capital letters! Flash it and u will have responsive twrp and rooted 4.3 ota
Sent from my SGH-M919 using Tapatalk 4
---------- Post added at 02:10 PM ---------- Previous post was at 01:34 PM ----------
Anyone having poor reception?
Sent from my SGH-M919 using Tapatalk 4
PillowMetal said:
Not without losing everything because it requires tricking your bootloader by writing to your misc partition, then running the 1.29 RUU - http://forum.xda-developers.com/showthread.php?t=2390821
Click to expand...
Click to collapse
Tried this once more, and successfully got S-off without downgrading anything, as a few others have reported.
http://forum.xda-developers.com/showthread.php?t=2314582
Brand new device Stock 1.29 Rom Uninstalled SuperSU Unrooted for Updates
PillowMetal said:
You have to have stock recovery to take the OTA
You can take the OTA if you are prepared for, and know what to do - also, don't take it if you are currently S-ON and ever want S-OFF because it comes with a new hboot.
Yes, you will probably lose root unless you are using the OTA preservation function of SuperSU and it works for you, but either way, it is easy to get it back.
Bottom line, how you take the OTA depends on whether you are S-ON or S-OFF, the latter is much easier. Assuming you are S-ON and running the Sprint stock ROM, here is what you need to do.
1. Flash stock recovery.
2. Lock the bootloader
3. Take the OTA update
4. Unlock the bootloader
5. Flash custom recovery (TWRP)
6. Flash root (SuperSU)
If you are S-off you can skip numbers 2 and 4.
Click to expand...
Click to collapse
Think I messed up a step in my attempt to return to unroot to be ready to get the 4.3 jellybean update. I was stock rom 1.29, rooted, SuperSU, twerp 2.6.3. Unlocked sim. I unistalled SuperSU using the full unroot option and relocked the bootloader. When the phone attempts to update it reboots into the bootloader straight into fastboot. Will not reboot and stay in hboot. Recovery option does nothing. Do I even want the ota 1.31? Do I just skip the OTA 1.31 and get the 4.3 jellybean update. I'm new first Android phone. Sorry for the idiocy I have portrayed here. Hope someone can help with knowledge of OTA's and Jellybean update. My problem seems so simple compared to all the other posts I read but I can't seem to figure it out on my own. Thanks everyone
upowersystems said:
Think I messed up a step in my attempt to return to unroot to be ready to get the 4.3 jellybean update. I was stock rom 1.29, rooted, SuperSU, twerp 2.6.3. Unlocked sim. I unistalled SuperSU using the full unroot option and relocked the bootloader. When the phone attempts to update it reboots into the bootloader straight into fastboot. Will not reboot and stay in hboot. Recovery option does nothing. Do I even want the ota 1.31? Do I just skip the OTA 1.31 and get the 4.3 jellybean update. I'm new first Android phone. Sorry for the idiocy I have portrayed here. Hope someone can help with knowledge of OTA's and Jellybean update. My problem seems so simple compared to all the other posts I read but I can't seem to figure it out on my own. Thanks everyone
Click to expand...
Click to collapse
Did you flash stock recovery? The OTA needs that. You did not need to unroot though. Also not sure if having an unlocked SIM interferes with OTA, never performed that myself. Since we don't have RUUs for anything later than 1.29, then yes, you will need to take the 1.31 OTA update first, then the 3.04 update.
Twerp to Stock recovery
PillowMetal said:
Did you flash stock recovery? The OTA needs that. You did not need to unroot though. Also not sure if having an unlocked SIM interferes with OTA, never performed that myself. Since we don't have RUUs for anything later than 1.29, then yes, you will need to take the 1.31 OTA update first, then the 3.04 update.
Click to expand...
Click to collapse
Darn, no I did not flash the stock recovery. Also I read another thread said I needed to unroot!lol So I was back tracing my steps to unroot, so I thought.. I did save the original backup before installing Twerp 2.6.3 and rooting so its in there if I can get to it. I really dont know how to proceed from here. There are no options in the bootloader to proceed.
Twerp vs Stock recovery
PillowMetal said:
Did you flash stock recovery? The OTA needs that. You did not need to unroot though. Also not sure if having an unlocked SIM interferes with OTA, never performed that myself. Since we don't have RUUs for anything later than 1.29, then yes, you will need to take the 1.31 OTA update first, then the 3.04 update.
Click to expand...
Click to collapse
Do I need to figure out how to flash or return to stock recovery from Twerp or can I simploy flash the 1.29 ruu back in to the device for a return to stock?
Twerp 2.6.3
PillowMetal said:
Did you flash stock recovery? The OTA needs that. You did not need to unroot though. Also not sure if having an unlocked SIM interferes with OTA, never performed that myself. Since we don't have RUUs for anything later than 1.29, then yes, you will need to take the 1.31 OTA update first, then the 3.04 update.
Click to expand...
Click to collapse
Kraizk said:
Must be on stock firmware and recovery to take the update guys.... It has been posted numerous times. You must also ahve the stock kernel.
Yes you will lose root if you take the OTA, you always do. Also TWRP appears to be broken with 4.3, no responsive, etc, etc
Click to expand...
Click to collapse
Maybe you can help. Will a re-install of the stock ruu 1.29 without removing twerp 2.6.3 and reverting to stock recovery cause issues.. Will this just completely re-install everything including stock Recovery or will twerp remain. I am running stock 1.29 rom, did save an original backup when I loaded twerp. How would I get in it to load it. Then I would not need to load the complete ruu. When I try for the ota it used to reboot to twerp. Since I unrooted it reboots to bootloader and there are NO options for load, Recovery option doesnt work. I have asked this question on several threads no one seems to know or its too simple for them to reply since I'm a newb. Thanks
upowersystems said:
Maybe you can help. Will a re-install of the stock ruu 1.29 without removing twerp 2.6.3 and reverting to stock recovery cause issues.. Will this just completely re-install everything including stock Recovery or will twerp remain. I am running stock 1.29 rom, did save an original backup when I loaded twerp. How would I get in it to load it. Then I would not need to load the complete ruu. When I try for the ota it used to reboot to twerp. Since I unrooted it reboots to bootloader and there are NO options for load, Recovery option doesnt work. I have asked this question on several threads no one seems to know or its too simple for them to reply since I'm a newb. Thanks
Click to expand...
Click to collapse
Are you S-Off? Is so, the easiest way to to get up to date for you would be to RUU back to 1.29 which will restore everything on your phone back to stock including recovery. Make sure you copy anything you want to keep off your phone's internal memory (/sdcard) because it will wipe that too.
But from there, you can then easily take the OTA update for 1.31, then take the update for 3.04. Now you have the latest and greatest and can now flash TWRP, SuperSU, and any 4.3 ROM you want. With S-Off, you do not need the bootloader unlocked, but if you want to, you can flash an old hboot 1.29 from May or earlier and use revone -u, or go through htcdev to unlock. But like I said, totally unnecessary and more of a pain for me than it is worth.
Now, if you are S-ON, that is a totally different story, you cannot flash back to 1.29 RUU unless you still on 1.29 and have not updated to 1.31 yet. If you are currently on 1.31 you will have to try and restore the backup you said you had through TWRP, flash stock recovery from fastboot, re-lock your bootloader and all kinds of other crap to get to 3.04 and unlocked and rooted again.
You would have to tell me more about what condition your phone is currently in. hboot version? recovery custom or stock? ROM version installed? S-On or S-Off, etc.
Current State
PillowMetal said:
Are you S-Off? Is so, the easiest way to to get up to date for you would be to RUU back to 1.29 which will restore everything on your phone back to stock including recovery. Make sure you copy anything you want to keep off your phone's internal memory (/sdcard) because it will wipe that too.
But from there, you can then easily take the OTA update for 1.31, then take the update for 3.04. Now you have the latest and greatest and can now flash TWRP, SuperSU, and any 4.3 ROM you want. With S-Off, you do not need the bootloader unlocked, but if you want to, you can flash an old hboot 1.29 from May or earlier and use revone -u, or go through htcdev to unlock. But like I said, totally unnecessary and more of a pain for me than it is worth.
Now, if you are S-ON, that is a totally different story, you cannot flash back to 1.29 RUU unless you still on 1.29 and have not updated to 1.31 yet. If you are currently on 1.31 you will have to try and restore the backup you said you had through TWRP, flash stock recovery from fastboot, re-lock your bootloader and all kinds of other crap to get to 3.04 and unlocked and rooted again.
You would have to tell me more about what condition your phone is currently in. hboot version? recovery custom or stock? ROM version installed? S-On or S-Off, etc.
Click to expand...
Click to collapse
Was told if I un-rooted and relocked the bootloader I should be able to update. This is a brand new phone. No data to worry about losing.
Currently:
Stock ROM 1.29, S-On, (Was rooted) Now Unrooted
Hboot 1.44 (Bootloader relocked)
Twerp Recovery (although with attempt to update to 1.31 twerp did not open as it did in prior attempts to update before unroot)
Now You have opened an interesting subject. Do I need to S-off before any updates to defeat the new hboot? New stuff is being written for the new hboot as we speak right? Read a thread last night about it. Sounded like they could s-off a 1.31 and I wouldn't need to worry about s-off'ing before upgrading. It also seems like I should be able to re load the backup of the stock recovery somehow and skip the complete load of the ruu 1.29 since I am already running it. I am probably making somethong more difficult than it needs to be but I would like to learn the little details. My first Android here. Want to learn quickly here as I Also bought the New 4g LTE Nexus 7 tablet with jelly bean. I get 4g LTE from T-mobile and just hotspot my phone.
upowersystems said:
Was told if I un-rooted and relocked the bootloader I should be able to update. This is a brand new phone. No data to worry about losing.
Currently:
Stock ROM 1.29, S-On, (Was rooted) Now Unrooted
Hboot 1.44 (Bootloader relocked)
Twerp Recovery (although with attempt to update to 1.31 twerp did not open as it did in prior attempts to update before unroot)
Now You have opened an interesting subject. Do I need to S-off before any updates to defeat the new hboot? New stuff is being written for the new hboot as we speak right? Read a thread last night about it. Sounded like they could s-off a 1.31 and I wouldn't need to worry about s-off'ing before upgrading. It also seems like I should be able to re load the backup of the stock recovery somehow and skip the complete load of the ruu 1.29 since I am already running it. I am probably making somethong more difficult than it needs to be but I would like to learn the little details. My first Android here. Want to learn quickly here as I Also bought the New 4g LTE Nexus 7 tablet with jelly bean. I get 4g LTE from T-mobile and just hotspot my phone.
Click to expand...
Click to collapse
If you don't want to go the RUU route, then the condition your phone is currently in would only require you to flash stock recovery from 1.29.651.10 (which I got from the actual OTA file). The problem is that your bootloader is now locked and your are S-ON, so you will not be able to flash stock recovery unless you unlock again. If you still have the unlock.bin file from htcdev, that will still work if was done on your current hboot version, otherwise, you would have to visit the site again. Then flash stock recovery, and relock bootloader again. Then the 1.31 update will succeed followed by the 3.04 update.
As far as S-OFF, if you ever want it, you should get it now before updating to anything - even 1.31 (as long as the date on your hboot is May 2013 or earlier). Because, you WILL get the new hboots when you update to 1.31 and 3.04 and since you are S-ON, you will be stuck with it. There is no guarantee that you will ever be able to get S-OFF again with the new hboots. People on hboot 1.54 have been waiting and clamoring for months and there has been no progress and other phones have never even been able to get S-OFF.
Using revone to S-OFF will not wipe your phone or remove anything, it does not require root, and it you do not need to be unlocked. I have performed it from the computer 3 times on Sprint phones and even have made a post about how to make it succeed. There is also a video showing how it can be done on the phone too via terminal emulator, but that method requires root.
Having S-OFF just makes life so much easier, but with it carries great responsibility because security has been turned off and you need to know what you are flashing or you can run into trouble. But as long as you can get to the bootloader, you can recover.
PillowMetal said:
You have to have stock recovery to take the OTA
You can take the OTA if you are prepared for, and know what to do - also, don't take it if you are currently S-ON and ever want S-OFF because it comes with a new hboot.
Yes, you will probably lose root unless you are using the OTA preservation function of SuperSU and it works for you, but either way, it is easy to get it back.
Bottom line, how you take the OTA depends on whether you are S-ON or S-OFF, the latter is much easier. Assuming you are S-ON and running the Sprint stock ROM, here is what you need to do.
1. Flash stock recovery.
2. Lock the bootloader
3. Take the OTA update
4. Unlock the bootloader
5. Flash custom recovery (TWRP)
6. Flash root (SuperSU)
If you are S-off you can skip numbers 2 and 4.
Click to expand...
Click to collapse
On the att variant you don't need to relock the boot loader to ota.
Sent from my XT1058 using Tapatalk 2
Hello -- I cannot do the T-Mobile (USA) Sense 6 for M7 update OTA. I believe the problem was the custom recovery (TW) which I had, so I flashed a variety of stock recoveries (4.20.707.7, 4.19.401.11, 4.06.1540.2). My telephone is software version: 4.19.531.10 which I cannot find a stock recovery for. The update downloads, reboots, then the progress bar goes about half-way before a red-triangle appears. Not sure what else I need to do to the phone. I only have OTA ROMs on the phone, S-OFF and the device is rooted. Any one with any experience with this and how did you resolve? Many thanks in advance!
LAChris67 said:
Hello -- I cannot do the T-Mobile (USA) Sense 6 for M7 update OTA. I believe the problem was the custom recovery (TW) which I had, so I flashed a variety of stock recoveries (4.20.707.7, 4.19.401.11, 4.06.1540.2). My telephone is software version: 4.19.531.10 which I cannot find a stock recovery for. The update downloads, reboots, then the progress bar goes about half-way before a red-triangle appears. Not sure what else I need to do to the phone. I only have OTA ROMs on the phone, S-OFF and the device is rooted. Any one with any experience with this and how did you resolve? Many thanks in advance!
Click to expand...
Click to collapse
The ota update might fails because of bad recovery installed or because the md5 checksum fails because of some missing or modified /system files or missing preloaded apps like flashlight, calculator etc etc that get wiped during bootloader unlock. Since your phone is s-off, you could run the 3.24.531.3 ruu.zip (don't s-on and don't relock bootloader) and apply each ota updates from 3.24.531.3 to 5.xx.531.x,
Ok, I have one really nooby question. Are T-Mobile USA and T-Mobile Germany branded phones the same? Because my phone is T-Mobile Germany, and I've seen that for T-Mobile branded phones Sense 6 update is out, so I'm wondering if that's for all phones or just USA.
Thank you
It's for T-Mobile USA for now. Europe roll out would soon occur.
Sent from my HTC One using XDA Premium 4 mobile app
LAChris67 said:
Hello -- I cannot do the T-Mobile (USA) Sense 6 for M7 update OTA. I believe the problem was the custom recovery (TW) which I had, so I flashed a variety of stock recoveries (4.20.707.7, 4.19.401.11, 4.06.1540.2). My telephone is software version: 4.19.531.10 which I cannot find a stock recovery for. The update downloads, reboots, then the progress bar goes about half-way before a red-triangle appears. Not sure what else I need to do to the phone. I only have OTA ROMs on the phone, S-OFF and the device is rooted. Any one with any experience with this and how did you resolve? Many thanks in advance!
Click to expand...
Click to collapse
T-Mobile makes the OTA updates not work with ANY modification (other than S-OFF), so even if you relock the bootloader and install the stock recovery, the OTA update will fail. I've even tried to unroot, but it still fails. Only way to update is to install the RUU, either the exe or the zip. I just installed the last ruu.zip that I could find (3.24.531.3) then let it do the OTA update to 4.19.531.10, reboot, then do the OTA update to 5.14.531.1. A pain in the ass, but after getting everything restored and set up, it works and looks great.
---------- Post added at 03:52 PM ---------- Previous post was at 03:51 PM ----------
hrvoje334 said:
Ok, I have one really nooby question. Are T-Mobile USA and T-Mobile Germany branded phones the same? Because my phone is T-Mobile Germany, and I've seen that for T-Mobile branded phones Sense 6 update is out, so I'm wondering if that's for all phones or just USA.
Thank you
Click to expand...
Click to collapse
Just the USA.
So I'm still stucked with 4.3. Yes, they also removed 4.4 and Sense 5.5 update.
alray said:
The ota update might fails because of bad recovery installed or because the md5 checksum fails because of some missing or modified /system files or missing preloaded apps like flashlight, calculator etc etc that get wiped during bootloader unlock. Since your phone is s-off, you could run the 3.24.531.3 ruu.zip (don't s-on and don't relock bootloader) and apply each ota updates from 3.24.531.3 to 5.xx.531.x,
Click to expand...
Click to collapse
Thanks for the help. This took half a day to resolve. I used Guru Reset to get things going. I had to go from RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed_2 and work my way up to v3 (via RUU) and then started to get the OTA v4 and v5. I could not immediately go to installing the v3 (tried a couple) RUUs. Also, I think part of my own personal problem was downloading the ZIP or the EXE for the v3 RUU was becoming corrupt each time (different file sizes, etc). I know my network is solid, but this was a real problem and I could never get a decent download of an RUU for htc1guru (tried different browsers, etc too).
Thanks for the help! I'm glad I got the help and the new upgrade --- seems very nice. And, thanks too to Titanium Backup -- it quickly got a lot of my user data back in place being I had to start from scratch.
LAChris67 said:
Thanks for the help. This took half a day to resolve. I used Guru Reset to get things going. I had to go from RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed_2 and work my way up to v3 (via RUU) and then started to get the OTA v4 and v5. I could not immediately go to installing the v3 (tried a couple) RUUs. Also, I think part of my own personal problem was downloading the ZIP or the EXE for the v3 RUU was becoming corrupt each time (different file sizes, etc). I know my network is solid, but this was a real problem and I could never get a decent download of an RUU for htc1guru (tried different browsers, etc too).
Thanks for the help! I'm glad I got the help and the new upgrade --- seems very nice. And, thanks too to Titanium Backup -- it quickly got a lot of my user data back in place being I had to start from scratch.
Click to expand...
Click to collapse
Were you trying to download the RUU using the phone? I have found in the past that can corrupt the files, not sure why. I located the RUU zip for the 3.14.531.3 release in a post here on XDA (a collection of RUUs from various sources). I prefer using the zip instead of the exe (the zip is less sensitive, the exe can check too many things, making it fail more often). Once the 3.14 RUU was applied, I could then do the OTA for the 4.19 and the 5.14 releases easily. Then I re-unlocked the bootloader, installed TWRP and then rooted it.
Fuzi0719 said:
Were you trying to download the RUU using the phone? I have found in the past that can corrupt the files, not sure why. I located the RUU zip for the 3.14.531.3 release in a post here on XDA (a collection of RUUs from various sources). I prefer using the zip instead of the exe (the zip is less sensitive, the exe can check too many things, making it fail more often). Once the 3.14 RUU was applied, I could then do the OTA for the 4.19 and the 5.14 releases easily. Then I re-unlocked the bootloader, installed TWRP and then rooted it.
Click to expand...
Click to collapse
Thanks Fuzi -- yeah, I was downloading on the PC. I tried it numerous times. I agree with you and tried going with the ZIP. All times, the file was coming up in different sizes and could not extract, but I finally got it to work. Once I got the download going for the first one, I basically followed what you said here and it worked. Thanks much again.
I have a HTC one M7 802w and I cannot achieve the installation of the latest OTA update in any of the known ways. My phone remains me that an update is available, but the update always fails with messages like: /data/preload/xxxxxx.apk File not found! (Automatically, Manually, ZIP update or any other method I know will deliver the same error and stop the process)
This is the status of my phone:
M7C_DUG – Device ID: HTC 802w
Networks: Dual Sim W-CDMA/GSM
MID: PN0771000, PN0772000
Region: China, Russia, Europe.
M7CDUG PVT SHIP S-ON
Tampered
Unlocked
HBOOT-2.49 0000
RADIO U3.14.3509.14
Open DSP v32.120.274.0909
QSC-E1237.29.35.0100
OS-4.21.402.5
Stock Recovery in
Feb 19 2014
SDK API 5.69
Android 4.4.2
HTC Sense 5.5
Rooted : SuperSU Chainfire v2.01
CERBERUS installed as a System APP
No NAND backup available
I could not flash the stock ROM, I guess because my HBOOT is newer than the stock ROM will support. So, I am stuck here.
Somebody said that I would need a NAND Backup of image OS-4.21.402.5 and a custom recovery image to restore it. Otherwise I need to S-Off, downgrade HBOOT, re-lock the HBOOT re-flash Jelly Bean, install all OTA updates as listed on this thread, go through out the official last OTA update and reconfigure my phone from scratch. If everything goes well, I may be two days without phone at least I do not sleep at all And I need the phone for both work and private usages (reason why I got a DUAL SIM) Having not a good phone for backup, therefore I dream of somebody being so kind of passing me a NAND backup of 4.21.402.5 and telling me the way to restore it. That could simplify my adventure to few hours at worst.
Somebody insisted me on the need of having stock recovery in... I do have the stock recovery in. I will only use a custom recovery to restore a NAND backup of my software version OS-4.21.402.5 providing that a kind person share it with me as I have no backup yet. The reason I believe I need a NAND backup is that somebody explained me: "When you unlock the HBOOT of a HTC using the official method (as per HTC support website) the phone is wiped out including the folder /data/preload and its content". Making a NAND backup before unlocking takes place can prevent that. I did not make a NAND backup and I did unlock my phone following HTC's method. Now when trying to install the OTA update, I get these errors like: error /data/preload/xxxxx.apk File not found! and the update process stops. They look pretty much like in line with the comment I mentioned.
Hope you have some ideas of how to overcome to this.
Your help would be very much appreciated
Regards
Ruiz64
Just got a new m9 been away from htc and rooting for a long time. just upgraded from my trusty galaxy s3. Is there any thing i should be aware of before unlocking boot loader and rooting. the phone is bone stock on 5.0.2 Should i let it update before unlocking boot loader and rooting. To my understanding i should unlock boot loader install twrp and don't mount the system before making a back up. Then install supersu and root or use sunshine to get root and do both.
tw39515 said:
Just got a new m9 been away from htc and rooting for a long time. just upgraded from my trusty galaxy s3. Is there any thing i should be aware of before unlocking boot loader and rooting. the phone is bone stock on 5.0.2 Should i let it update before unlocking boot loader and rooting. To my understanding i should unlock boot loader install twrp and don't mount the system before making a back up. Then install supersu and root or use sunshine to get root and do both.
Click to expand...
Click to collapse
Welcome back to HTC
It really depends on what you plan to do with your M9.
If you plan on using custom roms then yes unlock and install TWRP. Root is not required to flash roms.
Sunshine does not root or unlock but removes secure write (S-Off) which allows you to install different firmware's etc.
With S-on you can only move forward with firmware's. Lots of people complain about the 25.00, But its well worth it.
If you are not concerned about the cost, then unlock, twrp, flash superSu, and install sunshine and S-off then your free to do anything.
backup if you like but there is a thread with stock backups etc...
hope this helps
My main concern was if i want to use the phone first with out unlocking and it receives the tmobile update that i can unlock and root later.
tw39515 said:
My main concern was if i want to use the phone first with out unlocking and it receives the tmobile update that i can unlock and root later.
Click to expand...
Click to collapse
Yes you can still unlock and root and S-off on the current OS 5.1 - 2.11.531.19, but I would do it before MM comes out for this device.
will do viperone had issues on initial firmware so i flashed the latest ruu, sunshine is next. thanks for the advice.
Hi everyone,
I need some help if you may please. I bought an HTC One M9 phone and for a while it's been telling me to update to the newest android version. However, this was impossible because even when I downloaded de update from TMobile, when restarting, TWRP would kick in and wouldn't let me go through the whole setup. So, I got to some tutorials and I found some guidance but it's all so confusing and I've gotten to a point where I have no idea what to do next.
Phone is from:
-TMobile
What I did:
-Got rid of TWRP
-Got it back to unroot
Phone status as of now:
It works fine, but it's still not updated.
When going into the HTC Download mode screen, i get the following info:
-UNLOCKED
-htc_himaul PVT S-ON
-OS-1.32.531.24
-Warning: Security checking failed NOT_FIND_SMARTIO
FILE /mnt/media_rw/ext_sd/0PJAIMG.zip
File NOT FOUND
ADB is not reading my device when in download mode, I was trying to install stock recovery by following a tutorian in android soul: how to install stock recovery on htc one m9 (sorry but the forum won't let me post the link.
What do I need to do? There are so many tutorials out ther with so many different instructions that I'm totally confused now as to what to install or not to install . I'd like to install the Developer version but if I have to deal with the Tmobile one, that's ok.
Thanks in advance
Umang jain
[email protected]
umangilu said:
Hi everyone,
I need some help if you may please. I bought an HTC One M9 phone and for a while it's been telling me to update to the newest android version. However, this was impossible because even when I downloaded de update from TMobile, when restarting, TWRP would kick in and wouldn't let me go through the whole setup. So, I got to some tutorials and I found some guidance but it's all so confusing and I've gotten to a point where I have no idea what to do next.
Phone is from:
-TMobile
What I did:
-Got rid of TWRP
-Got it back to unroot
Phone status as of now:
It works fine, but it's still not updated.
When going into the HTC Download mode screen, i get the following info:
-UNLOCKED
-htc_himaul PVT S-ON
-OS-1.32.531.24
-Warning: Security checking failed NOT_FIND_SMARTIO
FILE /mnt/media_rw/ext_sd/0PJAIMG.zip
File NOT FOUND
ADB is not reading my device when in download mode, I was trying to install stock recovery by following a tutorian in android soul: how to install stock recovery on htc one m9 (sorry but the forum won't let me post the link.
What do I need to do? There are so many tutorials out ther with so many different instructions that I'm totally confused now as to what to install or not to install . I'd like to install the Developer version but if I have to deal with the Tmobile one, that's ok.
Thanks in advance
Umang jain
[email protected]
Click to expand...
Click to collapse
You say you got rid of twrp and tried to flash the stock recovery but adb is not working, so what recovery is currently on the phone?
I think the simplest solution would be to run the latest RUU from your sd card since you have adb issues (most likely a driver).
This will bring you to current stock 2.11.531.19. This will wipe the device and you must use a 4-32GB sd card.
Place it on the root of the sd card and boot into download mode, vol up to update and let it run.
you can get the RUU here
tw39515 said:
My main concern was if i want to use the phone first with out unlocking and it receives the tmobile update that i can unlock and root later.
Click to expand...
Click to collapse
kc6wke said:
Yes you can still unlock and root and S-off on the current OS 5.1 - 2.11.531.19, but I would do it before MM comes out for this device.
Click to expand...
Click to collapse
Wait. I just picked up an M9 myself, and my current plan is to wait until the official T-Mobile Marshmallow OTA is released before I unlock bootloader and S-OFF. My logic being that I could create then create a backup point in TWRP if I can't find a custom ROM that suitably handles T-Mobile specific features (WiFi calling, etc.) and just restore to the stock T-Mobile image.
Are you saying that updating OTA to Marshmallow could limit my ability to use Sunshine for S-OFF?
I suppose I could just S-OFF now and then RUU back to Stock T-Mobile Marshmallow once released?
edit: I'm already on Lollipop 5.1 on my M9. Am I already ****-out-of-luck for Sunshine?
Miguel_Lancaster said:
Wait. I just picked up an M9 myself, and my current plan is to wait until the official T-Mobile Marshmallow OTA is released before I unlock bootloader and S-OFF. My logic being that I could create then create a backup point in TWRP if I can't find a custom ROM that suitably handles T-Mobile specific features (WiFi calling, etc.) and just restore to the stock T-Mobile image.
Are you saying that updating OTA to Marshmallow could limit my ability to use Sunshine for S-OFF?
I suppose I could just S-OFF now and then RUU back to Stock T-Mobile Marshmallow once released?
edit: I'm already on Lollipop 5.1 on my M9. Am I already ****-out-of-luck for Sunshine?
Click to expand...
Click to collapse
Sunshine will work on the current version. We never know what will come when a new OTA's come out.
An OTA wont relock the bootloader or return it to S-ON. That is why I would recommend to do the S-off before an OTA.
kc6wke said:
Sunshine will work on the current version. We never know what will come when a new OTA's come out.
An OTA wont relock the bootloader or return it to S-ON. That is why I would recommend to do the S-off before an OTA.
Click to expand...
Click to collapse
Makes sense.
But won't unlocking the bootloader, flashing TWRP, then going S-OFF with Sunshine make it so that the newest OTA won't be accepted as an actual over-the-air update due to the altered filesystem? I know that I can still RUU, but will RUU not revert my S-OFF back to S-ON and re-lock the bootloader? Or are those things unaffected by RUU, even as an executable RUU?
Miguel_Lancaster said:
Makes sense.
But won't unlocking the bootloader, flashing TWRP, then going S-OFF with Sunshine make it so that the newest OTA won't be accepted as an actual over-the-air update due to the altered filesystem? I know that I can still RUU, but will RUU not revert my S-OFF back to S-ON and re-lock the bootloader? Or are those things unaffected by RUU, even as an executable RUU?
Click to expand...
Click to collapse
The RUU will not relock bootloader or rewrite S-On. To accept OTA, you need to have stock unmodified device.
You could run the RUU again or just unroot and flash stock recovery. The OTA will not wipe the device but the RUU will.
Hope this helps.
kc6wke said:
You say you got rid of twrp and tried to flash the stock recovery but adb is not working, so what recovery is currently on the phone?
I think the simplest solution would be to run the latest RUU from your sd card since you have adb issues (most likely a driver).
This will bring you to current stock 2.11.531.19. This will wipe the device and you must use a 4-32GB sd card.
Place it on the root of the sd card and boot into download mode, vol up to update and let it run.
you can get the RUU here
Click to expand...
Click to collapse
Thanks for this! Im having trouble with my computer and have been looking for a ruu zip all day lol. Will give this a shot on my TMOUS S-Off M9 tomorrow so I can jump to my next device.