[Q] XT1092 Stock? - X 2014 Q&A, Help & Troubleshooting

Hello everyone,
i have a XT1092. I am rooted. I heard that I would not be receiving the OTA or getting it to work if I have a custom recovery installed. That is apparently correct as I had a small 12mb update today and I have not been able to flash it . The phone got stuck in a boot loop. Anyways, I am out of the loop now and all is good. I just want to know how do i revert to stock recovery? I am on stock room but the phone is rooted with twrp installed. So do I just need to flash the stock recovery image, if yes then how? or do i need to flash the stock rom all over again, again if yes then please guide me with the same.
Also, can I flash XT1095 images on my device?
Thank you

roddem said:
Hello everyone,
i have a XT1092. I am rooted. I heard that I would not be receiving the OTA or getting it to work if I have a custom recovery installed. That is apparently correct as I had a small 12mb update today and I have not been able to flash it . The phone got stuck in a boot loop. Anyways, I am out of the loop now and all is good. I just want to know how do i revert to stock recovery? I am on stock room but the phone is rooted with twrp installed. So do I just need to flash the stock recovery image, if yes then how? or do i need to flash the stock rom all over again, again if yes then please guide me with the same.
Also, can I flash XT1095 images on my device?
Thank you
Click to expand...
Click to collapse
I do have the exact same problem. I had to do a fullwipe to get out of the bootloop.
PLS help us out guys! I also need to get the stock recovery back for upcoming updates.

This is what i did to take the 12 mb update
Just flash these commands in fastboot
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
Just make sure that you type each command one by one
if you update to xt1095 you have to be careful when u downgrade, u might brick your device
While downgrading dont flash the below 3 commands
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader

blademaster1990 said:
This is what i did to take the 12 mb update
Just flash these commands in fastboot
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
Just make sure that you type each command one by one
if you update to xt1095 you have to be careful when u downgrade, u might brick your device
While downgrading dont flash the below 3 commands
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
Click to expand...
Click to collapse
Thanks a lot for your time. So this would flash the stock recovery? and this all is uncompressed from which file? from where will i get the .imgs and all?

roddem said:
Thanks a lot for your time. So this would flash the stock recovery? and this all is uncompressed from which file? from where will i get the .imgs and all?
Click to expand...
Click to collapse
Go to this page:
http://www.androidgb.com/download-moto-x-2nd-gen-2014-android-5-0-lollipop-factory-image-784/
It should link you to factory image which is a zip file
Unzip the file in the place where you have your adb set up
once u have extracted the file, follow the instructions above

blademaster1990 said:
Go to this page:
http://www.androidgb.com/download-moto-x-2nd-gen-2014-android-5-0-lollipop-factory-image-784/
It should link you to factory image which is a zip file
Unzip the file in the place where you have your adb set up
once u have extracted the file, follow the instructions above
Click to expand...
Click to collapse
awesome. also what if i flash xt1095's image? would that be any beneficial? I guess itll help me get quicker updates. No?

there is a thread where it helps people who want to convert their xt1092 to xt1095.
But be careful when to change to xt1095 you have to backup your radio, since xt 1095 has different radio to ours.
There have been some people complaining about bricking their device while downgrading
Please check and only do it if your really comfortable with flashing

moto x 2nd gen hard bricked-xt1092
hi there my moto x 2nd gen got hard bricked..now i want to recover it..can you please help me....i will pay you if you want....

achchu93 said:
hi there my moto x 2nd gen got hard bricked..now i want to recover it..can you please help me....i will pay you if you want....
Click to expand...
Click to collapse
Nobody here can fix a hard brick. You will have to send it to motorola for repair.
Sent from my XT1095 using Tapatalk

achchu93 said:
hi there my moto x 2nd gen got hard bricked..now i want to recover it..can you please help me....i will pay you if you want....
Click to expand...
Click to collapse
You have only the green light, and no signal or image on you screen?

AGISCI said:
Nobody here can fix a hard brick. You will have to send it to motorola for repair.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
yeah i send it for repair..but they say it doesnt recognize in their power checking machine. they said it has a motherboard fault..but im damn sure it is only a software issue.because when i downgrade it to stock lolipop from cm13 only it happened...can i get blankflash file????
---------- Post added at 12:39 PM ---------- Previous post was at 12:36 PM ----------
cyker31 said:
You have only the green light, and no signal or image on you screen?
Click to expand...
Click to collapse
yeah..only green light when switch on and when i plugged into pc....otherwise no responses from it....

achchu93 said:
yeah i send it for repair..but they say it doesnt recognize in their power checking machine. they said it has a motherboard fault..but im damn sure it is only a software issue.because when i downgrade it to stock lolipop from cm13 only it happened...can i get blankflash file????
---------- Post added at 12:39 PM ---------- Previous post was at 12:36 PM ----------
yeah..only green light when switch on and when i plugged into pc....otherwise no responses from it....
Click to expand...
Click to collapse
Not blankflash files for Victara get (moto x 2014) still has not been made ​​public, for months, users ask for it via officials channels, but there has been no response by Motorola, (Motorola only replace the mother board, both US, EU and South American countries)
only as been released for the nexus moto and the X 2013, but the files don't match

cyker31 said:
Not blankflash files for Victara get (moto x 2014) still has not been made ​​public, for months, users ask for it via officials channels, but there has been no response by Motorola, (Motorola only replace the mother board, both US, EU and South American countries)
only as been released for the nexus moto and the X 2013, but the files don't match
Click to expand...
Click to collapse
U mean then in india they can only change motherboard??? But they are also a service station..then why cant they troubleshoot this???dont they have blankflash file?????

achchu93 said:
U mean then in india they can only change motherboard??? But they are also a service station..then why cant they troubleshoot this???dont they have blankflash file?????
Click to expand...
Click to collapse
Motorola has the blankflash files, we do not have them. They WILL NOT release them. They never have released blankflash files nor will they ever do it in the future. We may get it someday only if it leaks.
So ONLY motorola can fix this.
Sent from my XT1095 using Tapatalk

AGISCI said:
Motorola has the blankflash files, we do not have them. They WILL NOT release them. They never have released blankflash files nor will they ever do it in the future. We may get it someday only if it leaks.
So ONLY motorola can fix this.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yeah that is why i send it to indian motorola service canter..but they just saying they cant do it...does not motorola release those file to indian service stations?????

achchu93 said:
Yeah that is why i send it to indian motorola service canter..but they just saying they cant do it...does not motorola release those file to indian service stations?????
Click to expand...
Click to collapse
In no country really, Motorola only say »phone is dead» , a leak in this point, would be the only way ( as has happened with other moto phones ) but for now, nothing happened

achchu93 said:
Yeah that is why i send it to indian motorola service canter..but they just saying they cant do it...does not motorola release those file to indian service stations?????
Click to expand...
Click to collapse
I guess they don't have it if they say they can't fix a hard brick.
Sent from my XT1095 using Tapatalk

AGISCI said:
I guess they don't have it if they say they can't fix a hard brick.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
That is the thing.... So have to put this phone in trash????

achchu93 said:
That is the thing.... So have to put this phone in trash????
Click to expand...
Click to collapse
Personally I would save it and hope that one day the blankflash files leak.
Sent from my XT1095 using Tapatalk

Related

[Q] xt1056 Sprint, wont connect to network please help

while attempting root on my sprint moto x using the moto x tool kit I decided hey the verizon root might work since theyre both cdma. bad idea. now every time i turn on my phone. com.android.phone force closes and it tells me sim card error. ive already flashed the stock image and I still get the error. any help would be greatly appreciated. thank you.
I attempted the slapmymoto method in the motoxtool kit and selected verizon
bradsinram said:
I attempted the slapmymoto method in the motoxtool kit and selected verizon
Click to expand...
Click to collapse
not sure what you did at all because all the phones are rooted the same way.
i would download the 4.2.2 firmware here
http://sbf.droid-developers.org/download.php?device=0&file=18
then go to this guide
http://forum.xda-developers.com/showthread.php?t=2603358
and follow the guide for returning to stock.
then after you are stock decide if you want to unlock your bootloader or not. then pick the guide based on what you decide and follow it for root
dray_jr said:
not sure what you did at all because all the phones are rooted the same way.
i would download the 4.2.2 firmware here
http://sbf.droid-developers.org/download.php?device=0&file=18
then go to this guide
http://forum.xda-developers.com/showthread.php?t=2603358
and follow the guide for returning to stock.
then after you are stock decide if you want to unlock your bootloader or not. then pick the guide based on what you decide and follow it for root
Click to expand...
Click to collapse
I've my device is 4.4 and ive already returned to stock and am still having the issue?
bradsinram said:
I've my device is 4.4 and ive already returned to stock and am still having the issue?
Click to expand...
Click to collapse
ok but if you did it threw the toolkit you might of still returned to the stock firmware for a different device
i restored completely to stock and am still having the same issue. please help
bradsinram said:
i restored completely to stock and am still having the same issue. please help
Click to expand...
Click to collapse
im going to bump this in hopes someone else takes a look.
can you look under settings/About phone/Status
what dose it way for
Network
signal strength
Mobile netowork type
also do you have a valid imei/meid please dont post this number here just check the number there with the number on the side of the box the phone came in
dray_jr said:
im going to bump this in hopes someone else takes a look.
can you look under settings/About phone/Status
what dose it way for
Network
signal strength
Mobile netowork type
also do you have a valid imei/meid please dont post this number here just check the number there with the number on the side of the box the phone came in
Click to expand...
Click to collapse
it says sprint for network then com.android.phone force closes. then it switches to searching for service. it say no signal strength and mobile network type is unknown. but it seriosuly force closes ever 2 seconds.
bradsinram said:
it says sprint for network then com.android.phone force closes. then it switches to searching for service. it say no signal strength and mobile network type is unknown. but it seriosuly force closes ever 2 seconds.
Click to expand...
Click to collapse
if it keeps force closing then you are not returning the phone to stock. because if you did that would not happen.
so i need you to explain to me what you are using when returning your phone to stock because it is not taking for some reason.
dray_jr said:
if it keeps force closing then you are not returning the phone to stock. because if you did that would not happen.
so i need you to explain to me what you are using when returning your phone to stock because it is not taking for some reason.
Click to expand...
Click to collapse
im using the 4.4 file that the motox toolkit downloads then i extract it to my adb folder and run these commands
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
everything appears to sucessfully flash
bradsinram said:
im using the 4.4 file that the motox toolkit downloads then i extract it to my adb folder and run these commands
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
everything appears to sucessfully flash
Click to expand...
Click to collapse
so what your now telling me 3-4 post later is that you did not listen to me at all so you asked for help and when i gave you the correct answer on what to do you did not listen.
so i will try this one more time the 4.4 firmware package you keep using from the Moto x toolkit is not the Sprint firmware so STOP using it and download the firmware from the link below. and flash it with the above commands like i told you to do in my first post
http://sbf.droid-developers.org/download.php?device=0&file=734
dray_jr said:
so what your now telling me 3-4 post later is that you did not listen to me at all so you asked for help and when i gave you the correct answer on what to do you did not listen.
so i will try this one more time the 4.4 firmware package you keep using from the Moto x toolkit is not the Sprint firmware so STOP using it and download the firmware from the link below. and flash it with the above commands like i told you to do in my first post
http://sbf.droid-developers.org/download.php?device=0&file=734
Click to expand...
Click to collapse
okay I will do. so i just find it weird they have an almost identical name and both say sprint. but thank you and im download the one you provided now.
dray_jr said:
so what your now telling me 3-4 post later is that you did not listen to me at all so you asked for help and when i gave you the correct answer on what to do you did not listen.
so i will try this one more time the 4.4 firmware package you keep using from the Moto x toolkit is not the Sprint firmware so STOP using it and download the firmware from the link below. and flash it with the above commands like i told you to do in my first post
http://sbf.droid-developers.org/download.php?device=0&file=734
Click to expand...
Click to collapse
so ive used the file you provided me with and am still having the same exact issues. I appreciate your help.
I feel like i need to rewrite the radio partition but which I'm assumung is the NON-HLOS but every time i try to write to it i get permission denied
ok sorry i left out a command i think i know what is going on
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
i know you just did this but do it one more time and make sure you do the erase userdata and cache commands and then reboot.
after wiping everything i am not sure what would be wrong i have a sprint device and i have never had this issue.
dray_jr said:
ok sorry i left out a command i think i know what is going on
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
i know you just did this but do it one more time and make sure you do the erase userdata and cache commands and then reboot.
after wiping everything i am not sure what would be wrong i have a sprint device and i have never had this issue.
Click to expand...
Click to collapse
yeah I've tried it about ten times now and i think theres something else from the verizon root that mustve gotten flashed and is causing this
Well you have to flash the NON-HLOS.bin or it is not going to work.
Why not just download the full Sprint firmware file(I believe you've already done this) download rsdlite, remove the var line from the xml, and with one click your phone will work fine again.
Steve-x said:
Well you have to flash the NON-HLOS.bin or it is not going to work.
Why not just download the full Sprint firmware file(I believe you've already done this) download rsdlite, remove the var line from the xml, and with one click your phone will work fine again.
Click to expand...
Click to collapse
Thank you so much! I was wondering what kept causing rsd lite to fail. Im lead technician at a spring store and could just AE it but really dont want a refurb, especially since this phone is two days old
sorry but how do I remove the var line?
ive got it figured out thank you for your help

[Q] When is Lollipop going to be pushed?

So I just bought my Moto G 2014 (unlocked) and I have it all activated and set up. I was wondering though when Lollipop will be pushed so I can update to it? All I see articles are saying "It will get it" and "you should be able to update to it now" but I can't and I really don't want to void my warranty a day after I bought the phone. I want to try vanilla* Lollipop. Does anybody know when exactly?
( * = without having to manually install it via unlocking bootloader and using fastboot)
Motorola knows.
If it is the XT1063/4 ones, you can already install it via OTA.
Sent from my XT1064 using XDA Free mobile app
I have an Xt1064 and I still havent received the update. Is the update available here the same as the OTA? Im tempted to just install that one.
PerrottiX said:
If it is the XT1063/4 ones, you can already install it via OTA.
Sent from my XT1064 using XDA Free mobile app
Click to expand...
Click to collapse
I have XT1063 and I still didn't get the update through OTA as well. Is this normal?
i was trying
Hello, im from Perú. I got an XT1063 so when i am flashing i got two problems
1. hab check failed for boot
2. hab check failed for recovery
so anyone can help me?
I tried with Fastboot and with mfastboot, but same result.
I found this updates in other web which you can update to lollipop. Can anybody try them? I want to try but i can open the recovery...
getmovil dot com / motorola / root-moto-g-2014-android-lollipop /comment-page-1 /#comment-83348
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Lokke9191 said:
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Click to expand...
Click to collapse
...from where can i download the proper ota zip????
mine is MOTO G2 (2nd GEN) XT1068 dual sim europe
You can't. Lollipop isn't released for the XT1068 yet. But be patient. I suspect it to be there in the first or the second quarter of 2015! (And with a little luck maybe even this year...).
i understood we will take directly :angel:Android 6.0 (M) Milky Bar.......:good:
htcgr said:
i understood we will take directly :angel:Android 6.0 (M) Milky Bar.......:good:
Click to expand...
Click to collapse
Honestly, it should be there anytime now. But people keep asking the question over and over again: when is it coming? This is annoying, because no one really knows!
Lokke9191 said:
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Click to expand...
Click to collapse
any idea how to re-lock the bootloader? :good:
kevin_arthur said:
any idea how to re-lock the bootloader? :good:
Click to expand...
Click to collapse
Follow the guide at ( http://www.droidviews.com/restore-moto-g-2014-to-stock-and-lock-the-bootloader/ ). However there's a couple of things you have to do differently.
Your first command after you enter fastboot mode is gonna have to be "mfastboot.exe oem lock begin".
Theres also gonna be four system.img that you have to flash so after the command "mfastboot.exe flash system system.img_sparsechunk.2" you have to enter the command "mfastboot.exe flash system system.img_sparsechunk.3". Follow the rest of the guide, including the "mfastboot.exe oem lock" command at the end.
So basically the commands would be...
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
My phone automatically rebooted after that last command and my boot loader was locked even though it still displays the "Bootloader Unlocked" screen, I was able to flash the zip in the OP through the stock recovery after that.
COPIED AND PASTED FROM ANOTHER THREAD.
Courtesy of captivatingtab
---------- Post added at 11:29 AM ---------- Previous post was at 11:13 AM ----------
htcgr said:
...from where can i download the proper ota zip????
mine is MOTO G2 (2nd GEN) XT1068 dual sim europe
Click to expand...
Click to collapse
The xt1068 ota isnt available yet. There is a process to install another versions firmware on the xt1068 then upgrade to lollipop. But it looks buggy and super risky. I wouldn't recommend trying it. Id wait a little for the 1068 ota to be released. I know the other poster said it wont be available until 2015. But nobody knows for sure when itll be out. If i where to guess, id say itll be out fairly soon, sometime in the next 30 days. If I where you Id play it safe and wait it out.
---------- Post added at 11:32 AM ---------- Previous post was at 11:29 AM ----------
The only otas out so far are for the 1064 & 1063.
wish me luck!
Lokke9191 said:
Follow the guide at ( ). However there's a couple of things you have to do differently.
Your first command after you enter fastboot mode is gonna have to be "mfastboot.exe oem lock begin".
Theres also gonna be four system.img that you have to flash so after the command "mfastboot.exe flash system system.img_sparsechunk.2" you have to enter the command "mfastboot.exe flash system system.img_sparsechunk.3". Follow the rest of the guide, including the "mfastboot.exe oem lock" command at the end.
So basically the commands would be...
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
My phone automatically rebooted after that last command and my boot loader was locked even though it still displays the "Bootloader Unlocked" screen, I was able to flash the zip in the OP through the stock recovery after that.
COPIED AND PASTED FROM ANOTHER THREAD.
Courtesy of captivatingtab
Click to expand...
Click to collapse
okey, i will try.
thank you my friend!
smitharro said:
You can't. Lollipop isn't released for the XT1068 yet. But be patient. I suspect it to be there in the first or the second quarter of 2015! (And with a little luck maybe even this year...).
Click to expand...
Click to collapse
It'll be sooner than that. Within the next 6 weeks.
Sent from my XT1068 using XDA Free mobile app
Lokke9191 said:
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Click to expand...
Click to collapse
i have the international unlocked xt1063. where can i get the zip?
Is there any official source on the release date?
Kobro said:
i have the international unlocked xt1063. where can i get the zip?
Click to expand...
Click to collapse
Its in the general section under a thread titled ota-index 1063-1064 update to lollipop.
I have a complete stock, nothing flashed or rooted or anything xt1064 and it says the zip needs a fingerprint when I try to install it from this thread...
http://forum.xda-developers.com/moto-g-2014/development/lollipop-moto-g-2014-xt1064-t2937361/page11
htcgr said:
i understood we will take directly :angel:Android 6.0 (M) Milky Bar.......:good:
Click to expand...
Click to collapse
its a Marshmallow 6.0

Stock image for XT1097?

Hi,
I have a Brazilan version XT1097, bootloader unlocked but no root yet.
I cannot install anything from play store because I get an error that does not say much.
All I did was trying to root using a guide I found that tells you to use CF-Autoroot, but it just did not work.
Then I installed TWRP to see if there was any ROMs available since I came from the Nexus 5 and was used to see tons of ROMs on xda to grab and flash.
To my surprise, none is available so far.
Now I am trying to find the original 1097 images to flash on my device and go back to stock.
Might even give up on root, if necessary, but I need the phone back
Any ideas on how to proceed?
A different problem now
The user seco2004 (http://forum.xda-developers.com/member.php?u=4946010) has provided me with his backup image.
I followed the steps on the motorola website to flash all the files but my phone is stuck at the bootloader warning message, that one that says that the bootloader is unlocked.
When I entered TWRP to wipe all over again, it says there is no system installed...
Any pointers are most welcome!
leandroqm said:
The user seco2004 (http://forum.xda-developers.com/member.php?u=4946010) has provided me with his backup image.
I followed the steps on the motorola website to flash all the files but my phone is stuck at the bootloader warning message, that one that says that the bootloader is unlocked.
When I entered TWRP to wipe all over again, it says there is no system installed...
Any pointers are most welcome!
Click to expand...
Click to collapse
I'm not sure if this is what you tried before, but there's pretty much no chance of anything going wrong if you follow the commands:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img (maybe you missed this part? instead of the "system.img", you need to flash the system files one at a time, something like: mfastboot flash system systemfile_1.img, the mfastboot flash system systemfile_2.img, and then proceed with the commands below)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
After all this the phone should boot normally into stock 4.4.4. Sorry for the delay, Tapatalk didn't notify me , hope you got it fixed already.
seco2004 said:
I'm not sure if this is what you tried before, but there's pretty much no chance of anything going wrong if you follow the commands:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img (maybe you missed this part? instead of the "system.img", you need to flash the system files one at a time, something like: mfastboot flash system systemfile_1.img, the mfastboot flash system systemfile_2.img, and then proceed with the commands below)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw
fastboot oem fb_mode_clear
After all this the phone should boot normally into stock 4.4.4. Sorry for the delay, Tapatalk didn't notify me , hope you got it fixed already.
Click to expand...
Click to collapse
Yes, I dit it that same night (morning, I should say) by the very same process you described.
Thank you a lot for the images and responses!
leandroqm said:
Yes, I dit it that same night (morning, I should say) by the very same process you described.
Thank you a lot for the images and responses!
Click to expand...
Click to collapse
Did you get it working?
Sent from my XT1097 using Tapatalk
seco2004 said:
Did you get it working?
Sent from my XT1097 using Tapatalk
Click to expand...
Click to collapse
Yes, absolutely!
I upgraded it to lollipop and rooted right afterwards
How did you get a 1097 stock Lollipop image?
TheAquanox said:
How did you get a 1097 stock Lollipop image?
Click to expand...
Click to collapse
secco2004 shared me his backups
But is it 1097 lollipop or 1095 with the módem from 1097? Can you share dais backup? I'm Being unable to tether and would like to find out if it is the rom or the phone.
Greetings !
It was actually the KK 4.4.4 original images.
I had to update to lollipop right after via OTA.
IDK if secco2004 allows me to share it. Could you PM him, please?
He posted recently on the topic.
Yeah, it was actually the 4.4.4 Brazilian firmware, feel free to share it. For lollipop I have just the flasheable zip.
Sent from my XT1097 using Tapatalk
Since secco2004 said it is ok to share, tell me if you want me to sent it somewhere...
It is the XT1097 4.4.4 brazilian original images.
hey, can I have XT1097 stock images please?
I also need it
I flashed NX CM12.1 v3.0 rom and lost gps.
Someone in the thread said that i have to go back to stock, verify gps is working properly... blah, blah, blah.....
So the thing is that i don´t know what stock image to use on my phone and where to get it.
It is a XT1097.
Can any of you guys help me?
Need help please
I've flashed ATT_XT1097_5.0.2_system_ ext4_ root.zip using Mofo.exe and followed directions to the T but soon as its done flashing I reboot back into fastboot mode to wipe the cache but gives me error hab check failed for recovery failed to validate recovery image boot up failed. Please any help would be a life savor i'm lost. Anyone know where to find recovery.img file for Moto X XT1097 stock image file maybe I can flash in fastboot mode? I just hope I Dont have a bricked device. I am stuck in bootloop mode and can't wipe cache.
Thanks!
I really thank you, it worked for me! :good:

[Q] lollipop to kit kat?

Is it possible to downgrade from lollipop to KitKat? Is there any guide out there?
I have a simfree uk motox 2014 from Motorola, currently unrooted
Please let me know!
Thanks and happy holidays
If your X has an unlockable bootloader you can flash the KK factory image, if it's available for your model.
Edit: You can't just flash factory image to downgrade. See my post below.
_MetalHead_ said:
If your X has an unlockable bootloader you can flash the KK factory image, if it's available for your model.
Click to expand...
Click to collapse
Bear with me as I'm quite new to the motox world (...I have experience with custom roms for other older xperia devices):
1) I purchased the sim-free uk version from motorola, how can I check if my bootloader is locked?
2) if locked, is there a way to unlock it without permanently loosing warranty?
2) do I need to root in order to flash the kk factory image?
Cheers
L
varignet said:
Bear with me as I'm quite new to the motox world (...I have experience with custom roms for other older xperia devices):
1) I purchased the sim-free uk version from motorola, how can I check if my bootloader is locked?
2) if locked, is there a way to unlock it without permanently loosing warranty?
2) do I need to root in order to flash the kk factory image?
Cheers
L
Click to expand...
Click to collapse
1.) Go here- http://goo.gl/pt01c
2.) There are no unofficial means to unlock your bootloader. If it is unlockable via Motorola's official tool, it still might void your warranty. I am unfamiliar with warranties anywhere other than the US so you'll need to check and see.
3.) No.
_MetalHead_ said:
1.) Go here- http://goo.gl/pt01c
2.) There are no unofficial means to unlock your bootloader. If it is unlockable via Motorola's official tool, it still might void your warranty. I am unfamiliar with warranties anywhere other than the US so you'll need to check and see.
3.) No.
Click to expand...
Click to collapse
Sorry to revive an old thread but there are no bootroms or any files that will have an issue with downgrading if I use the factory image? I remember some phones brick when downgrading. I'm using a pure edition from the U.S.
Thanks
fbiryujin said:
Sorry to revive an old thread but there are no bootroms or any files that will have an issue with downgrading if I use the factory image? I remember some phones brick when downgrading. I'm using a pure edition from the U.S.
Thanks
Click to expand...
Click to collapse
You can do it but apparently it's not as simple as flashing the factory image. Here are the instructions, given to me by a friend who got them from Motorola. Proceed at your own risk, I am not responsible... yada yada.
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin (MUST do if going back to KK)
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
Good luck.
_MetalHead_ said:
You can do it but apparently it's not as simple as flashing the factory image. Here are the instructions, given to me by a friend who got them from Motorola. Proceed at your own risk, I am not responsible... yada yada.
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin (MUST do if going back to KK)
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
Good luck.
Click to expand...
Click to collapse
Thanks. I Take it RSD Lite is not an option? Don't have the Pure Edition right now. (Returned to get another wood option) I'm just hoping to have options in case it comes with 5.0 (I really want Xposed/XPrivacy)
Edit: Also I take it that I should use mfastboot?
fbiryujin said:
Thanks. I Take it RSD Lite is not an option? Don't have the Pure Edition right now. (Returned to get another wood option) I'm just hoping to have options in case it comes with 5.0 (I really want Xposed/XPrivacy)
Click to expand...
Click to collapse
It shouldn't come with 5.0. I just got a replacement one last week and it still had KK on it so I'm betting they're all still shipping with KK. Not sure about RSD light, but if you're familiar with fastboot, it really is all quite simple to do. Probably take you 3 minutes total. But again, you shouldn't have to worry. And I agree, xposed is a necessity.
Huh, I had never heard of RSD Lite before... I have just been using mfastboot.
_MetalHead_ said:
It shouldn't come with 5.0. I just got a replacement one last week and it still had KK on it so I'm betting they're all still shipping with KK. Not sure about RSD light, but if you're familiar with fastboot, it really is all quite simple to do. Probably take you 3 minutes total. But again, you shouldn't have to worry. And I agree, xposed is a necessity.
Click to expand...
Click to collapse
That's good to hear. I'm ok with fastboot but I stil get nervous when a command takes a bit of time with it
fbiryujin said:
That's good to hear. I'm ok with fastboot but I stil get nervous when a command takes a bit of time with it
Click to expand...
Click to collapse
Just saw your mfastboot edit, you might have to use it. I haven't done anything fancy on my X, so I've just been using fastboot on my Nexus 5. I guess on the X people have been using mfastboot instead.
And don't be nervous, some things just take longer to flash than others.
_MetalHead_ said:
Just saw your mfastboot edit, you might have to use it. I haven't done anything fancy on my X, so I've just been using fastboot on my Nexus 5. I guess on the X people have been using mfastboot instead.
And don't be nervous, some things just take longer to flash than others.
Click to expand...
Click to collapse
Thanks. I'll use mfastboot just to be sure (If I even need to downgrade). Now to wait for that Walnut Finish to come back in stock :/
mfastboot is especially for Motorola devices..
with the adb commands posted earlier, one could use RSDLite, but one would need to modify the XML file included in the firmware zip, IF an XML file is included, some of the later available firmware doesn't include the XML file..
RSDLite is particular software for Motorola devices..
Sent by my Motorola Droid XYBoard MZ617-32 10.1_ICS 4.04
NWKENT said:
mfastboot is especially for Motorola devices..
with the adb commands posted earlier, one could use RSDLite, but one would need to modify the XML file included in the firmware zip, IF an XML file is included, some of the later available firmware doesn't include the XML file..
RSDLite is particular software for Motorola devices..
Sent by my Motorola Droid XYBoard MZ617-32 10.1_ICS 4.04
Click to expand...
Click to collapse
I wonder why they stopped including XML files...
_MetalHead_ said:
You can do it but apparently it's not as simple as flashing the factory image. Here are the instructions, given to me by a friend who got them from Motorola. Proceed at your own risk, I am not responsible... yada yada.
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin (MUST do if going back to KK)
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
Good luck.
Click to expand...
Click to collapse
Just an FYI:
I downgraded back to Kitkat yesterday, and it worked perfectly. Just too many bugs in Lollipop...
I used the steps above, except for flashing the bootloader. I have heard that people have bricked their Moto G trying to flash older bootloaders when going back to Kitkat (something about the bootloader not loading pre-Lollipop kernels or something). Wasn't sure if this would be the same for the Moto X. Thought I would try without it first.
Edit: I used mfastboot as well.
divergens said:
Just an FYI:
I downgraded back to Kitkat yesterday, and it worked perfectly. Just too many bugs in Lollipop...
I used the steps above, except for flashing the bootloader. I have heard that people have bricked their Moto G trying to flash older bootloaders when going back to Kitkat (something about the bootloader not loading pre-Lollipop kernels or something). Wasn't sure if this would be the same for the Moto X. Thought I would try without it first.
Edit: I used mfastboot as well.
Click to expand...
Click to collapse
So you skipped "fastboot flash boot boot.img"?
No, that is the kernel I think.
I skipped: fastboot flash motoboot motoboot.img
divergens said:
No, that is the kernel I think.
I skipped: fastboot flash motoboot motoboot.img
Click to expand...
Click to collapse
Ok so just the below steps then?
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin (MUST do if going back to KK)
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
So people with the Nexus 6 are stuck with buggy Lollipop. I guess I'm glad I couldn't get the 64GB one I wanted when they sold out so fast.
fbiryujin said:
Ok so just the below steps then?
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin (MUST do if going back to KK)
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
So people with the Nexus 6 are stuck with buggy Lollipop. I guess I'm glad I couldn't get the 64GB one I wanted when they sold out so fast.
Click to expand...
Click to collapse
Yep, I think you can skip the reboot-bootloader right after it too. Can't remember if I did that... Of course doing that step won't hurt anything, so just do it anyways I suppose.
Also remember to use Motorola's fastboot when flashing the system image, I don't think the regular fastboot supports such a large image size. I used mfastboot for everything so that I would remember to do it.
Yeah, lollipop bugs need to be ironed out first. I messed around a bit with my friend's Nexus 6 before I bought the Moto X. It was just ridiculously huge. The Moto feels like a more properly sized and refined design, even though the Nexus 6 feels like a stretched out Moto X. I wish 64 GB was available when I bought my Moto, oh well, I will have to make do with OTG.
divergens said:
Yep, I think you can skip the reboot-bootloader right after it too. Can't remember if I did that... Of course doing that step won't hurt anything, so just do it anyways I suppose.
Also remember to use Motorola's fastboot when flashing the system image, I don't think the regular fastboot supports such a large image size. I used mfastboot for everything so that I would remember to do it.
Yeah, lollipop bugs need to be ironed out first. I messed around a bit with my friend's Nexus 6 before I bought the Moto X. It was just ridiculously huge. The Moto feels like a more properly sized and refined design, even though the Nexus 6 feels like a stretched out Moto X. I wish 64 GB was available when I bought my Moto, oh well, I will have to make do with OTG.
Click to expand...
Click to collapse
Haha my main device is sadly an iPhone 6 right now, and that's too big. I prefer the size of the iPhone 5S or the first gen Moto X. I want to be able to use the entire device with one hand while being secure in the fact that a movement or gesture won't loosen my grip on it. Sadly the world is just making bigger phones now, and the few smaller ones out there are "cheap" low budget/power options.

[Q] Moto X 2013 ( Unlocked ) Indian Version Network Modem Brick when Switched to CROM

INDIA VERSION
This is my first post to this community pardon me for any novice mistakes.
Bought moto x from Flipkart ( Pelase search as i am not able to post link)
Moto X 2013 is a great device in that small size.
Due to OTA delay, i used my guts to flash my Moto X. ( I have flashed Nexus 7 2012 before )
with CM 12
but to flash cm 12 i had to flash cm 11, then cm 12.
This link was helpful (official CM ghost site link )
now there was a bug in device name detecion while flashing ROM. so then only recovery image which worked was cwm recovery (cwm6.0.3.6.img)
But then google Apps got failed with that recovery. to install google aps i installed another recovery twrp. and it wokked.
REAL PROBLEM
I wanted to go back to STOCK ROM
I followed the thread which i used to get my unlock key.
there i found this link after requesting them the access to download
motorola-global-portal.custhelp app/standalone/bootloader/recovery-images
I followed the recovery steps which are as follows..
Alternatively, you can reboot into fastboot mode if you have adb...adb reboot bootloader.
Next flash the images using fastboot:
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
After performing this sequence, you can relock your device with
$ fastboot oem lock
It got Flashed, After it got started i found there was no network.
i checked the IEMI number it is 0.
I panicked and tired going back to CM 12.1. ( in between i got reboot loop ).
But finally after side load and recovery image change i am back to CM 12.1 but i have lost my network. any help will be much appriciated.
You sure you installed xt1052 Asia retail firmware?
If not you need to flash it
Sent from my XT1058 using Tapatalk
Thanks a Million
adity said:
You sure you installed xt1052 Asia retail firmware?
If not you need to flash it
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
Please send me the link or file to my email -> [email protected]
Thanks you so much for your help.

Categories

Resources