Hello,
so when I try to manually install Intel HAXM it gives me the following error:
http : // i.imgur . com / fUHAebg.gif
So I checked my UEFI and the standard value for Intel Virtualization Technology is "Enabled".
http : // i.imgur. com / fs77pTx.gif
Does anybody know how to solve this?
And seriously? I can't link pictures???...
Thanks!
On my computer, I had to update the BIOS. Try going to your computer manufacture's website support section. They may have updated BIOS(and other devices) downloads for your model. Follow the instructions when updating the BIOS. Turning off power.etc in the middle of the install can mess up your computer.
Yeah, even with a VT-x enabled CPU you still need to tick off something in the BIOS to really enable it, that is the case at least for me.
Related
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
en_ky said:
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
Click to expand...
Click to collapse
Hi en_ky!
I was following the other installation method "Installing Windows XP with Windows Post Install (WPI)" that you can find on this forum, but basically should be the same.
Anyway, regarding WLAN on the WPI method it says:
"13. WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later". This step is just before installing CYGWIN
After finishing with SwapResolution,
"Now it usually asks about the WLAN drivers, see step nr. 13."
"If it asks about drivers for Windows Mobile, just answer yes until it finishes."
"To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
"DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager."
"If you copy this without being in safe mode, it will not work because after the reboot the system will replace the overridden version with the old one again."
So check again all the steps and do the last one in Safe Mode (I think here is your problem)!
Good luck!
thank you for your reply,
I tried to resolve my problem with help of windows update and an eterneth connection for internet. At first it doesn't start with the same yellow ! But after a restart, it starts!!!!
Many thanks to you in any case; i know that your answer will be usefull for another person with this problem!
Can anyone advise this rookie user how to set up a test environment to use with an Android Studio project?
I recently installed Android Studio on my Windows 7 laptop and put together my first simple app. When I tried to debug it, I was offered two pre-configured test environments. The first was "Nexus 5 API 21x86" but when I tried to use that one it told me I needed HAXM. After much research I worked out what I needed to do to install HAXM but the installation file gave me the following error message:
VT_Not_Support = This computer does not support Intel Virtualization Technology (VT-x). HAXM cannot be installed."
I therefore turned my attention to the second option "TestDevice". When I tried to run that, Android Studio reported:
emulator: ERROR: This AVD's configuration is missing a kernel file!!
emulator: ERROR: ANDROID_SDK_ROOT is undefined
I Googled the error and found the advice that I needed to install "ARM EABI v7a System Image" but when I ran the SDK manager it told me that this component was already installed.
Can anyone please tell me either how to overcome the ANDROID_SDK_ROOT undefined problem or advise how otherwise to set up an emulated test environment that works on my computer.
I am an experienced programmer but a complete novice when it comes to Android Studio, all the associated applications and Android devices in general.
Many thanks in advance for your patience.
Keith
writerman said:
... following error message:
VT_Not_Support = This computer does not support Intel Virtualization Technology (VT-x). HAXM cannot be installed."
Click to expand...
Click to collapse
Keith, have you tried enabling VT-x in your BIOS settings?
Thanks for the suggestion. I wasn't aware of this BIOS setting. I will give it a try but may not have a chance to try it out until the weekend
This should do the trick if you have compatible CPU.
Hi folks,
A few hours ago I download and installed Android Studio and the SDK. While trying to launch a virtual device from Android Studio, I got this error: (sorry, I can't post images, it's my first post here )
"emulator: ERROR: x86 emulation currently requires hardware acceleration!
Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: HAX kernel module is not installed!"
I googled around, and I checked:
0) My architecture supports VT-x (I have an i5 on an asrock h87 pro4)
1) Virtualization is turned on on my bios
2) HAXM Installer is installed in SDK Manager
Nonetheless, I still get an error when I try to install intelhaxm-android.exe (located in [sdk-folder]\extras\intel\Hardware_Accelerated_Execution_Manager).
I checked with Speccy, and it looks like my Virtualization capabilities are there, but still turned off...
Any idea?
Thanks!
Hi,
I am in internship and I develop on Android glasses : I have Epson Moverio BT 200 model. I am at windows 7
My problem is that I don't manage to install driver to connect glasses to computer.
I follow this tutorial provided by Epson (I cannot posted the link => I am a new...)
I am blocked at second last step, during driver installation. I obtain this error message :
"Windows could'nt install your embt2.
Windows has found none driver for your peripheral device. "
I have already uninstalled google's usb driver (whit sdk manager), and next reinstalled, restarted computer, glasses, witout resilt.
The path for driver that I chose is : "C:\Program Files\Android\android-sdk\extras\google\usb_driver".
Do you have a solution, please ?
P.S : sorry for the faults.
Installation of Moverio BT 200
Hey Le-E
Epson Moverio BT 200 has not been certified with Google, therefore, you can't install it as ADB Andriod interface yet or get any app for it from Google play store directly.
Cheers
Hi Farid_Ashabi,
thank you for your response.
However, I follow a document provided by Epson, if Moverio bt 200 was not certified with google, why have they done this document ?
The document : tech.moverio.epson.com/en/life/bt-200/pdf/bt200_adb1505a_en.pdf (add https:// at beginning) (It last updating is 05/21/2015).
Are you sure ?
Installation driver Moverio BT 200 Windows 7
Hey Le-E,
I have looked at the document, it looks like work around......this document tell you how to hack the INF and add Moverio's VID\PID so the device could get recognized as Andriod ADB Interface. I have worked with Vuzix M100 and they have certified Google driver and no such hassle as installing Andriod Studio.
Cheers
Farid
Hi Farid_Ashabi,
I see. I will continue to search why that doens't work.
Thank you for your time !
keep it up !
Hi,
I resolved my problem.
For others persons with the problem, it is neccessary to add next lines twice in file "android_winsub.inf" :
";WS2 - MTP
%SingleAdbInterface% = USB_Install, USB\VID_04B8&PID_0C06
%CompositeAdbInterface% = USB_Install, USB\0VID_04B8&PID_0C06&MI_01
;WS2 - PTP
%SingleAdbInterface% = USB_Install, USB\VID_04B8&PID_0C07
%CompositeAdbInterface% = USB_Install, USB\VID_04B8&PID_0C07&MI_01"
(see the tuto tech.moverio.epson.com/en/life/bt-200/pdf/bt200_adb1505a_en.pdf (add https:// at beginning)).
you had to add this lines in the sections "[Google.NTx86]" and "[Google.NTamd64]".
And it finishes.
good luck =).
Hey Le-E,
I was able to get the BT-200 to show up as ADB interface with INF changes, but when I Execute “adb devices” to confirm name of device (0123456789ABCDEF) ......no devices is listed had no luck (as documents says, I tried is multiple time, still the same).....I'm running it under Windows 7 Ult. 64 bit......can you tell me your BT-200's Andriod version as well as your OS?
Cheers,
Farid
Hi Farid_Ashabi,
I am in Windows 7 32 bits.
BT-200's Andriod version is 4.0.4.
Have you suceeded to intsall driver ?
Hi Le-E
My specs are: Anroid 4.0.4 Kernel Version 3.0.21-00003-OMAP Build number: D1.1.2
Yes, driver have been installed and my BT-200 comes in as Android ADB Interface in device manager, but when I run the "adb device" in command prompt, I should see my device listed, but I don't.............if listed, I can install few APK files manually......no luck yet
Hi Farid_Ashabi,
sorry, I was with friends this weekend.
I have exactly same version for Kernel and Build number. I do not understand why this does not work for you...
Do you have tryed with an other USB cable ?
If you're getting the following error
Code:
emulator: ERROR: x86_64 emulation currently requires hardware acceleration!
Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: Unable to open HAXM device: ERROR_FILE_NOT_FOUND
go to intel's website and download HAXM
some people are reporting issues with the win10 anniversary update so YMMV.
ajpettit said:
If you're getting the following error
Code:
emulator: ERROR: x86_64 emulation currently requires hardware acceleration!
Please ensure Intel HAXM is properly installed and usable.
CPU acceleration status: Unable to open HAXM device: ERROR_FILE_NOT_FOUND
go to intel's website and download HAXM
some people are reporting issues with the win10 anniversary update so YMMV.
Click to expand...
Click to collapse
You don't need to go to intel's site. You can do this:
Go to RemixOSPlayer folder > remixemu > haxm-windows_v6_0_3 > run intelhaxm-android > select your desired RAM amount and complete the procedure.
Try launching RemixOSPlayer.exe again and it should work this time.
This didn't work for me on my miix 700.
and if the still presists, go to bios settings and enable "Virtualization Technology" from there! it will worK!
virtualization is enabled, but haxm says it isn't. any ideas?
intel i5-4460
16gb ram
win 8.1 64bit
wow, this Remix OS player plays smoothly on my dell 9350
My processor is AMD...I'm also getting this Intel error, I also get it when trying to boot Remix OS for PC. BOO!
Unfortunately, AMD doesn't HAXM, which Android Studio requires. Remix OS Player is based on Android Studio. Sorry to be the bearer of bad news... If there is news on this though, I'll update here. Thanks!
match_stick said:
My processor is AMD...I'm also getting this Intel error, I also get it when trying to boot Remix OS for PC. BOO!
Click to expand...
Click to collapse
ToXiC said:
and if the still presists, go to bios settings and enable "Virtualization Technology" from there! it will worK!
Click to expand...
Click to collapse
Confirmed - in BIOS settings (under "configuration" tab I believe) "Intel: VT" needs to be enabled. If it still doesn't work, try installing HAXM again by running remixemu\haxm-windows_v6_0_3\intelhaxm-android.exe.
Seems to be working for me now.
donwload from intel. os remix included file is v6_0_3\interhaxm-android.exe. but from intel was 6.0.4
I was able to 'install' the haxm.
Command Prompt(Admin) type bcdedit /set hypervisorlaunchtype off （Disable Hyper-V，Windows Phone Emulator will not work）, then "Restart Your PC".
I guess you install Visual Studio, this is because Windows Phone SDK opens during installation caused by Hyper-V, Windows Phone Emulator SDK needs to be realized with Hyper-v virtualization.
Note: bcdedit /set hypervisorlaunchtype auto （Enable Hyper-V）
https://software.intel.com/en-us/an...-execution-manager-end-user-license-agreement
There was a few window 10's that the binaries where corrupt. You can check to see if yours is corrupt by just using rar.