Database Develop

[MOD] status bar bluetooth/silent toggles improved - update 10/23/2010

s0niqu3 brought it to my attention how much the status bar bluetooth toggle
sucked so I changed the onClick method to toggle the bluetooth state instead
of opening settings to the bluetooth page
this is the replacement method for com/android/server/status/StatusBarService$31
which is in the services file in framework.
Code:
.method public onClick(Landroid/view/View;)V
.registers 7
.parameter "v"
.prologue
const-string v1, "StatusBar"
iget-object v3, p0, Lcom/android/server/status/StatusBarService$31;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v3, v3, Lcom/android/server/status/StatusBarService;->mContentResolver:Landroid/content/ContentResolver;
const-string v4, "airplane_mode_on"
const/4 v5, 0x0
invoke-static {v3, v4, v5}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
if-nez v2, :exit
invoke-static {}, Landroid/bluetooth/BluetoothAdapter;->getDefaultAdapter()Landroid/bluetooth/BluetoothAdapter;
move-result-object v0
if-eqz v0, :exit
const/4 v5, 0x1
const-string v3, "bluetooth"
invoke-static {v3}, Landroid/os/ServiceManager;->checkService(Ljava/lang/String;)Landroid/os/IBinder;
move-result-object v3
invoke-static {v3}, Landroid/bluetooth/IBluetooth$Stub;->asInterface(Landroid/os/IBinder;)Landroid/bluetooth/IBluetooth;
move-result-object v2
invoke-interface {v2}, Landroid/bluetooth/IBluetooth;->getBluetoothState()I
move-result v3
const/16 v4, 0xc
if-ne v3, v4, :toggleOn
:toggleOff
const-string v4, "Disabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->disable(Z)Z
goto :exit
:toggleOn
const/16 v4, 0xa
if-ne v3, v4, :exit
const-string v4, "Enabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->enable(Z)Z
:exit
return-void
.end method
I added flashables to this post use the stock updater to install, these should
be compatible with any JI6 based ROM because I don't think there are a lot
of mods for /system/framework/services.*. I also killed the battery full notification.
EDIT:
added 3 state toggle to the silent button so now you can toggle from Ringer on --> Vibrate --> Silent
below is the replacement onClick method com/android/server/status/StatusBarService$33
which is in the services file in framework.
Code:
.method public onClick(Landroid/view/View;)V
.registers 7
.parameter "v"
.prologue
const/4 v2, 0x0
const/4 v3, 0x1
const/4 v4, 0x2
.line 3641
iget-object v0, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget-boolean v0, v0, Lcom/android/server/status/StatusBarService;->mSilentStatus:Z
if-nez v0, :cond_10
.line 3642
iget-object v0, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v0, v0, Lcom/android/server/status/StatusBarService;->mContentResolver:Landroid/content/ContentResolver;
const-string v1, "driving_mode_on"
invoke-static {v0, v1, v2}, Landroid/provider/Settings$System;->putInt(Landroid/content/ContentResolver;Ljava/lang/String;I)Z
.line 3646
:cond_10
iget-object v0, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v0, v0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
const-string v1, "audio"
invoke-virtual {v0, v1}, Landroid/content/Context;->getSystemService(Ljava/lang/String;)Ljava/lang/Object;
move-result-object v0
check-cast v0, Landroid/media/AudioManager;
iget-object v1, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget v1, v1, Lcom/android/server/status/StatusBarService;->mSoundProfile:I
if-eqz v1, :ringerOn
if-eq v1, v4, :vibrate
if-eq v1, v3, :ringerOff
:ringerOn
move v1, v4
:goto_23
invoke-virtual {v0, v1}, Landroid/media/AudioManager;->setRingerMode(I)V
.line 3648
return-void
:ringerOff
move v1, v2
goto :goto_23
:vibrate
iget-object v1, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v1, v1, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
const-string v2, "vibrator"
invoke-virtual {v1, v2}, Landroid/content/Context;->getSystemService(Ljava/lang/String;)Ljava/lang/Object;
move-result-object v1
check-cast v1, Landroid/os/Vibrator;
const-wide/16 v2, 0x32
invoke-virtual {v1, v2, p3}, Landroid/os/Vibrator;->vibrate(J)V
const/4 v1, 0x1
goto :goto_23
.end method
replacement method for StatusBarService.smali, this enables the 3 icons for the silent button.
you also have to add the image resource to twframework-res.apk and a line in public.xml
Code:
<public type="drawable" name="quick_panel_icon_vibrate" id="0x020200d8" />
Code:
.method private prepareQuickPanelSettingIcon(I)V
.registers 7
.parameter "mask"
.prologue
.line 1344
const/4 v2, 0x0
.line 1345
.local v2, textColor:I
const/4 v0, 0x0
.line 1346
.local v0, btnTextView:Landroid/widget/TextView;
const/4 v1, 0x0
.line 1348
.local v1, settingIcon:Landroid/graphics/drawable/Drawable;
packed-switch p1, :pswitch_data_c6
.line 1400
:goto_6
:pswitch_6
invoke-direct {p0, v0, v1, v2}, Lcom/android/server/status/StatusBarService;->updateQuickPanelSettingIcon(Landroid/widget/TextView;Landroid/graphics/drawable/Drawable;I)V
.line 1401
return-void
.line 1350
:pswitch_a
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mWiFiBtn:Landroid/widget/TextView;
.line 1352
iget-boolean v3, p0, Lcom/android/server/status/StatusBarService;->mWiFiStatus:Z
if-eqz v3, :cond_2a
.line 1353
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x2020062
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1354
const v2, -0xff8b34
.line 1355
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mWiFiBtn:Landroid/widget/TextView;
const-string v4, "WI-FI(ON)"
invoke-virtual {v3, v4}, Landroid/widget/TextView;->setText(Ljava/lang/CharSequence;)V
.line 1360
:goto_27
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mWiFiBtn:Landroid/widget/TextView;
.line 1361
goto :goto_6
.line 1357
:cond_2a
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x202005f
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1358
const/4 v2, -0x1
goto :goto_27
.line 1364
:pswitch_39
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mBTBtn:Landroid/widget/TextView;
.line 1366
iget-boolean v3, p0, Lcom/android/server/status/StatusBarService;->mBTStatus:Z
if-eqz v3, :cond_50
.line 1367
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x202005d
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1368
const v2, -0xff8b34
goto :goto_6
.line 1370
:cond_50
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x202005c
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1371
const/4 v2, -0x1
.line 1373
goto :goto_6
.line 1376
:pswitch_5f
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mSoundBtn:Landroid/widget/TextView;
.line 1378
iget v3, p0, Lcom/android/server/status/StatusBarService;->mSoundProfile:I
const/4 v2, 0x2
if-eq v3, v2, :cond_8c
const/4 v2, 0x1
if-eq v3, v2, :cond_7a
.line 1379
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x20200b3
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1380
const v2, -0xff8b34
goto :goto_6
:cond_7a
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x20200d8
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1380
const v2, -0xff8b34
goto/16 :goto_6
.line 1382
:cond_8c
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x20200b2
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1383
const/4 v2, -0x1
.line 1385
goto/16 :goto_6
.line 1388
:pswitch_9c
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mGpsBtn:Landroid/widget/TextView;
.line 1390
iget-boolean v3, p0, Lcom/android/server/status/StatusBarService;->mGpsStatus:Z
if-eqz v3, :cond_b4
.line 1391
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x202005e
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1392
const v2, -0xff8b34
goto/16 :goto_6
.line 1394
:cond_b4
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x20200b4
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1395
const/4 v2, -0x1
goto/16 :goto_6
.line 1348
nop
nop
:pswitch_data_c6
.packed-switch 0x1
:pswitch_a
:pswitch_39
:pswitch_6
:pswitch_5f
:pswitch_6
:pswitch_6
:pswitch_6
:pswitch_9c
.end packed-switch
.end method

Sounds great, one less widget I will have to use, any way someone could make it a flashable zip so us none coders can use it?

I added flashables to this thread use the stock updater to install, these should
be compatible with any JI6 based ROM because I don't think there are a lot
of mods for /system/framework/services.*. I also killed the battery full notification.
which I don't think any one will miss.

untermensch said:
s0niqu3 brought it to my attention how much the status bar bluetooth toggle
sucked so I changed the onClick method to toggle the bluetooth state instead
of opening settings to the bluetooth page
this is the replacement method for com/android/server/status/StatusBarService$31
which is in the services file in framework.
Code:
.method public onClick(Landroid/view/View;)V
.registers 7
.parameter "v"
.prologue
const-string v1, "StatusBar"
iget-object v3, p0, Lcom/android/server/status/StatusBarService$31;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v3, v3, Lcom/android/server/status/StatusBarService;->mContentResolver:Landroid/content/ContentResolver;
const-string v4, "airplane_mode_on"
const/4 v5, 0x0
invoke-static {v3, v4, v5}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
if-nez v2, :exit
invoke-static {}, Landroid/bluetooth/BluetoothAdapter;->getDefaultAdapter()Landroid/bluetooth/BluetoothAdapter;
move-result-object v0
if-eqz v0, :exit
const/4 v5, 0x1
const-string v3, "bluetooth"
invoke-static {v3}, Landroid/os/ServiceManager;->checkService(Ljava/lang/String;)Landroid/os/IBinder;
move-result-object v3
invoke-static {v3}, Landroid/bluetooth/IBluetooth$Stub;->asInterface(Landroid/os/IBinder;)Landroid/bluetooth/IBluetooth;
move-result-object v2
invoke-interface {v2}, Landroid/bluetooth/IBluetooth;->getBluetoothState()I
move-result v3
const/16 v4, 0xc
if-ne v3, v4, :toggleOn
:toggleOff
const-string v4, "Disabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->disable(Z)Z
goto :exit
:toggleOn
const/16 v4, 0xa
if-ne v3, v4, :exit
const-string v4, "Enabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->enable(Z)Z
:exit
return-void
.end method
I added flashables to this post use the stock updater to install, these should
be compatible with any JI6 based ROM because I don't think there are a lot
of mods for /system/framework/services.*. I also killed the battery full notification.
Click to expand...
Click to collapse
Thanks again for everything you've done, glad to have so many annoying samsung bugs fixed by such awesome people in the community.
Cheers, =)

Thanks for a fix to a very annoying issue. Noob question: which of these would I use with the Bionix. ROMs?
Sent from my SGH-T959 using XDA App

murse said:
Thanks for a fix to a very annoying issue. Noob question: which of these would I use with the Bionix. ROMs?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Hi,
I can't guarantee anything, but always try the JI6 deodexed version on the bionix roms first.
Cheers, =)

Not sure why but JI6 deodexed would not install in clockwork, just got stuck saying installing update, So i just had to just pull the services.jar and use root explorer and pasted it in system/framework. It hung when restarting, but then I rebooted into recovery wiped both caches and that fixed the hang issue. Works great thanks for this. One of these days I will learn some coding stuff so i can do it myself.
For those interested, that is what i had to do to get it to work on fusion1.1 with the King Klicks Kernel.

mikey98277 said:
Not sure why but it would not install in clockwork, just got stuck saying installing update, So i just had to just pull the services.jar and use root explorer and pasted it in system/framework. It hung when restarting, but then I rebooted into recovery wiped both caches and that fixed the hang issue. Works great thanks for this. One of these days I will learn some coding stuff so i can do it myself.
For those interested, that is what i had to do to get it to work on fusion1.1 with the King Klicks Kernel.
Click to expand...
Click to collapse
FYI, the flashable update.zip is in the download file.
EDIT: Just installed on Bionix FINAL and the bluetooth status update works great. Nice addition. Haven't tried to charge 100%, but I certainly won't miss that notification. Thanks untermensch for all of your mods!!!

a400meter said:
FYI, the flashable update.zip is in the download file.
Not sure what you meant by that, As I said I tried the update.zip file and it did not work on Fusion 1.1 with KK Kernel. So I pulled the file from it and pushed it manually.
Click to expand...
Click to collapse

mikey98277 said:
a400meter said:
FYI, the flashable update.zip is in the download file.
Not sure what you meant by that, As I said I tried the update.zip file and it did not work on Fusion 1.1 with KK Kernel. So I pulled the file from it and pushed it manually.
Click to expand...
Click to collapse
What that means is that the update.zip file that is located inside the zip you downloaded is not meant to be installed through clockwork, but instead through the stock phone recovery menu. Replace the clockwork update.zip on your internal memory with the downloaded one, and then go to the phone recovery and hit "Reinstall Packages".
I know you already installed the file manually, the clarification is more for others who may need help.
Click to expand...
Click to collapse

untermensch said:
s0niqu3 brought it to my attention how much the status bar bluetooth toggle
sucked so I changed the onClick method to toggle the bluetooth state instead
of opening settings to the bluetooth page
this is the replacement method for com/android/server/status/StatusBarService$31
which is in the services file in framework.
Code:
.method public onClick(Landroid/view/View;)V
.registers 7
.parameter "v"
.prologue
const-string v1, "StatusBar"
iget-object v3, p0, Lcom/android/server/status/StatusBarService$31;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v3, v3, Lcom/android/server/status/StatusBarService;->mContentResolver:Landroid/content/ContentResolver;
const-string v4, "airplane_mode_on"
const/4 v5, 0x0
invoke-static {v3, v4, v5}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
if-nez v2, :exit
invoke-static {}, Landroid/bluetooth/BluetoothAdapter;->getDefaultAdapter()Landroid/bluetooth/BluetoothAdapter;
move-result-object v0
if-eqz v0, :exit
const/4 v5, 0x1
const-string v3, "bluetooth"
invoke-static {v3}, Landroid/os/ServiceManager;->checkService(Ljava/lang/String;)Landroid/os/IBinder;
move-result-object v3
invoke-static {v3}, Landroid/bluetooth/IBluetooth$Stub;->asInterface(Landroid/os/IBinder;)Landroid/bluetooth/IBluetooth;
move-result-object v2
invoke-interface {v2}, Landroid/bluetooth/IBluetooth;->getBluetoothState()I
move-result v3
const/16 v4, 0xc
if-ne v3, v4, :toggleOn
:toggleOff
const-string v4, "Disabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->disable(Z)Z
goto :exit
:toggleOn
const/16 v4, 0xa
if-ne v3, v4, :exit
const-string v4, "Enabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->enable(Z)Z
:exit
return-void
.end method
I added flashables to this post use the stock updater to install, these should
be compatible with any JI6 based ROM because I don't think there are a lot
of mods for /system/framework/services.*. I also killed the battery full notification.
Click to expand...
Click to collapse
First of all, great work with this fix.
Is there any way that this method could be used to change the Silent shortcut to a Vibrate shortcut? I'm not sure about others, but I personally never use Silent mode, and it bugs the hell out of me that it's so easily accessible yet useless for me.

gilbar said:
mikey98277 said:
What that means is that the update.zip file that is located inside the zip you downloaded is not meant to be installed through clockwork, but instead through the stock phone recovery menu. Replace the clockwork update.zip on your internal memory with the downloaded one, and then go to the phone recovery and hit "Reinstall Packages".
I know you already installed the file manually, the clarification is more for others who may need help.
Click to expand...
Click to collapse
ahh... i get it now, maybe thats why it didnt work, well I got it going anyways thanks.
Click to expand...
Click to collapse

So the deodexed one should work fine with Eugene's frankin final?

Thanks, this makes life easier.
I used RootExplorer to copy your services.odex into android's /system/framework folder. Painless and it works perfectly.
I wish the notification bar had the option to enable/disable TV out.

Thanks for this - works well to turn BT off, but to turn on it's very slow. Is that just me?

Turns on or off in less than 2 or 3 seconds here.

Colt1911 said:
Turns on or off in less than 2 or 3 seconds here.
Click to expand...
Click to collapse
Wow, that's instant compared to my phone.
My phone takes usually 10-11 seconds to turn on bluetooth, and that's totally independent of how I go about turning it on. If I use the notification toggle, or turn on directly from the settings menu, or use the default android power control widget, they all take 10-11 seconds to turn on bluetooth.
So, my guess is that maybe bluetooth on/off speed is affected by custom kernels or custom roms, or a combination of both and still unknown factors.
Honestly, I don't really mind how long it takes, I don't use bluetooth all that often, but the few times I do, the toggle has always annoyed me that it just opened bluetooth settings, so this mod is perfect for me.
Thanks again, cheers everyone, =)

s0niqu3 said:
Wow, that's instant compared to my phone.
My phone takes usually 10-11 seconds to turn on bluetooth, and that's totally independent of how I go about turning it on. If I use the notification toggle, or turn on directly from the settings menu, or use the default android power control widget, they all take 10-11 seconds to turn on bluetooth.
So, my guess is that maybe bluetooth on/off speed is affected by custom kernels or custom roms, or a combination of both and still unknown factors.
Honestly, I don't really mind how long it takes, I don't use bluetooth all that often, but the few times I do, the toggle has always annoyed me that it just opened bluetooth settings, so this mod is perfect for me.
Thanks again, cheers everyone, =)
Click to expand...
Click to collapse
I have the same issue, and it started exactly when i started installing Bionix ROMs on both my phone and my wife's. I figured it was something about how he built his ROM, and just deided to live with it. It could either be Bionix orJAC. I havent tried Bionix with stock kernel to try and troubleshoot.

I updated the OP files, you can now toggle from Ringer On --> Vibrate --> Silent
seems like the button icon should be changed to 3 state also for a more finished
look.

untermensch said:
I updated the OP files, you can now toggle from Ringer On --> Vibrate --> Silent
seems like the button icon should be changed to 3 state also for a more finished
look.
Click to expand...
Click to collapse
Sounds great, thanks!
Would you mind posting the code to make the silent/vibrate change manually?
Thanks again, cheers, =)

[b] [dev][how to]aosp lockscreen whit toggle [/b]

Hi xda peoples
I ported this mods from concept showed by dictact74 & Mirko_DDD, so major credits go to their.....
There are two ways to make this mod.
Improve a new method or by use a old unused method.
Here we going to create a new method, if a lot of people will be interested about this thread, I'll post the other method
YOU CAN DOWNLOAD HERE A FLASHABLE FILE:
http://forum.xda-developers.com/showthread.php?t=2047010
Android.policy.jar
Let's start with Android.policy.jar
smali/com/android/internal/policy/imp/LockPatternKeyguardView
Find and replace the whole method,so we'll improve the aosp lockcreen:
Code:
.method createLockScreen()Landroid/view/View;
.locals 6
.prologue
.line 1268
const/4 v0, 0x0
iget-object v5, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mContext:Landroid/content/Context;
invoke-virtual {v5}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v5
const-string v4, "darboc_aosp_lock"
invoke-static {v5, v4, v0}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v5
if-nez v5, :cond_dar
.line 1044
new-instance v0, Lcom/android/internal/policy/impl/sec/CircleLockScreen;
iget-object v1, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mContext:Landroid/content/Context;
iget-object v2, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mConfiguration:Landroid/content/res/Configuration;
iget-object v3, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mLockPatternUtils:Lcom/android/internal/widget/LockPatternUtils;
iget-object v4, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mUpdateMonitor:Lcom/android/internal/policy/impl/KeyguardUpdateMonitor;
iget-object v5, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mKeyguardScreenCallback:Lcom/android/internal/policy/impl/KeyguardScreenCallback;
invoke-direct/range {v0 .. v5}, Lcom/android/internal/policy/impl/sec/CircleLockScreen;->(Landroid/content/Context;Landroid/content/res/Configuration;Lcom/android/internal/widget/LockPatternUtils;Lcom/android/internal/policy/impl/KeyguardUpdateMonitor;Lcom/android/internal/policy/impl/KeyguardScreenCallback;)V
.line 1274
.local v0, lockView:Landroid/view/View;
:goto_0
invoke-direct {p0, v0}, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->initializeTransportControlView(Landroid/view/View;)V
.line 1275
return-object v0
:cond_dar
new-instance v0, Lcom/android/internal/policy/impl/LockScreen;
iget-object v1, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mContext:Landroid/content/Context;
iget-object v2, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mConfiguration:Landroid/content/res/Configuration;
iget-object v3, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mLockPatternUtils:Lcom/android/internal/widget/LockPatternUtils;
iget-object v4, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mUpdateMonitor:Lcom/android/internal/policy/impl/KeyguardUpdateMonitor;
iget-object v5, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mKeyguardScreenCallback:Lcom/android/internal/policy/impl/KeyguardScreenCallback;
invoke-direct/range {v0 .. v5}, Lcom/android/internal/policy/impl/LockScreen;->(Landroid/content/Context;Landroid/content/res/Configuration;Lcom/android/internal/widget/LockPatternUtils;Lcom/android/internal/policy/impl/KeyguardUpdateMonitor;Lcom/android/internal/policy/impl/KeyguardScreenCallback;)V
.line 1274
goto :goto_0
.end method
Save and exit
Recompile and push to /system/app
SecSettings:
Open
smali/com/android/settings/LockScreenSettings
we going to improve the checkbox.......
add BLU lines
canc RED lines
Code:
.method private updateState()V
.locals 9
.prologue
const/4 v5, 0x1
const/4 v6, 0x0
.line 263
[COLOR="Blue"]iget-object v7, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
const-string v8, "darboc_aosp_lock"
invoke-static {v4, v8, v6}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v4
if-eqz v4, :cond_7
move v4, v5
invoke-virtual {v7, v4}, Landroid/preference/CheckBoxPreference;->setChecked(Z)V
.line 265
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
iget-object v7, p0, Lcom/android/settings/LockScreenSettings;->mClock:Landroid/preference/CheckBoxPreference;
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4[/COLOR]
const-string v8, "show_clock"
Find and replace
Code:
iget-object v9, p0, Lcom/android/settings/LockScreenSettings;->mClock:Landroid/preference/CheckBoxPreference;
const/4 v10, 0x0
invoke-virtual {v9, v10}, Landroid/preference/CheckBoxPreference;->setPersistent(Z)V
[COLOR="blue"]const-string v9, "darboc_aosp_lock"
invoke-virtual {p0, v9}, Lcom/android/settings/LockScreenSettings;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v9
check-cast v9, Landroid/preference/CheckBoxPreference;
iput-object v9, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
.line 159
iget-object v9, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
const/4 v10, 0x0
invoke-virtual {v9, v10}, Landroid/preference/CheckBoxPreference;->setPersistent(Z)V
[/COLOR]
.line 161
const-string v9, "weather"
invoke-virtual {p0, v9}, Lcom/android/settings/LockScreenSettings;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
Find and add the condition
Code:
iget-object v4, p0, Lcom/android/settings/LockScreenSettings;->mSayCommand:Landroid/preference/CheckBoxPreference;
invoke-virtual {p2, v4}, Ljava/lang/Object;->equals(Ljava/lang/Object;)Z
move-result v4
if-eqz v4, [COLOR="Blue"]:cond_bbb[/COLOR]
.line 338
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
const-string v5, "wake_up_lock_screen"
iget-object v6, p0, Lcom/android/settings/LockScreenSettings;->mSayCommand:Landroid/preference/CheckBoxPreference;
Find and add the new condition method
Code:
invoke-static {v4, v5, v2}, Landroid/provider/Settings$System;->putInt(Landroid/content/ContentResolver;Ljava/lang/String;I)Z
goto/16 :goto_1
:cond_a
move v2, v3
goto :goto_5
[COLOR="blue"]:cond_bbb
iget-object v4, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
invoke-virtual {p2, v4}, Ljava/lang/Object;->equals(Ljava/lang/Object;)Z
move-result v4
if-eqz v4, :cond_0
.line 313
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
const-string v5, "darboc_aosp_lock"
iget-object v6, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
invoke-virtual {v6}, Landroid/preference/CheckBoxPreference;->isChecked()Z
move-result v6
if-eqz v6, :cond_c
:goto_6
invoke-static {v4, v5, v2}, Landroid/provider/Settings$System;->putInt(Landroid/content/ContentResolver;Ljava/lang/String;I)Z
.line 314
invoke-direct {p0}, Lcom/android/settings/LockScreenSettings;->updateState()V
.line 340
invoke-super {p0, p1, p2}, Lcom/android/settings/SettingsPreferenceFragment;->onPreferenceTreeClick(Landroid/preference/PreferenceScreen;Landroid/preference/Preference;)Z
move-result v2
return v2
:cond_c
move v2, v3
.line 313
goto :goto_6[/COLOR]
.line 337
.end method
.method public onResume()V
.locals 0
.prologue
.line 257
invoke-super {p0}, Lcom/android/settings/SettingsPreferenceFragment;->onResume()V
Save and exit
Now we'll iprove the xml part that show the checkbox and call the mali part
Go to res/values/strings.xml
Add the following lines somewhere in this file:
Code:
<string name="enable_aosp_lock">AOSP lockscreen</string>
<string name="enable_aosp_lock_text">Enable AOSP lockscreen</string>
Save and exit
Go to res/xml/Lockscreen_Settings.xml
Add the following lines where you like that checkbox would be showed
Code:
<CheckBoxPreference android:title="@string/enable_aosp_lock" android:key="darboc_aosp_lock" android:summary="@string/enable_aosp_lock_text" />
Recompile and push to /system/app
Reboot
Now will find your new toggle in lockscreen options
Enjoy
MERRY X-MAS AND HAPPY MODS NEW YEAR

Reserved.........
Inviato dal mio GT-N7000 con Tapatalk 2

One more
Inviato dal mio GT-N7000 con Tapatalk 2

Thanks for sharing your knowledge ! I will see how far I can get

[Guide How-to] KitKat 4.4.2/Android L Music Control - Volume Music Skip and More

[Guide How-to] KitKat 4.4.2/Android L Music Control - Volume Music Skip
UPDATED FOR ANDROID L
This guide requires knowledge of decompiling and compiling apk and smali files.
It is only a guide.
I do not take requests. If you want this mod for your rom, get with a dev with the knowledge to get it done.
I have attached android.policy files for diffing in case you get stuck on a section.
SecSettings.apk
In SecSettings.apk we setup the Music Control menu items & toggles.
(This edit does not work on Android L)
*** Add the two new files from the SecSettings_new_files.zip attached at the bottom of this post.
res/values/strings.xml edit:
Add new lines
Code:
<string name="volbtn_toggle_title">Music Control</string>
<string name="volbtn_timeout_title">Button Delay</string>
<string name="volbtn_timeout_summary">%s</string>
<string name="volbtn_vol_up_title">Volume Up Action</string>
<string name="volbtn_vol_up_summary">%s</string>
<string name="volbtn_vol_down_title">Volume Down Action</string>
<string name="volbtn_vol_down_summary">%s</string>
res/values/arrays.xml edit:
Add new lines
Code:
<string-array name="volbtn_action_entries">
<item>Next</item>
<item>Pause</item>
<item>Play</item>
<item>Play/Pause</item>
<item>Previous</item>
<item>Stop</item>
</string-array>
<string-array name="volbtn_action_values">
<item>87</item>
<item>127</item>
<item>126</item>
<item>85</item>
<item>88</item>
<item>86</item>
</string-array>
<string-array name="volbtn_timeout_entries">
<item>100ms</item>
<item>150ms</item>
<item>200ms</item>
<item>250ms</item>
<item>300ms</item>
<item>350ms</item>
<item>400ms</item>
<item>450ms</item>
<item>500ms</item>
</string-array>
<string-array name="volbtn_timeout_values">
<item>100</item>
<item>150</item>
<item>200</item>
<item>250</item>
<item>300</item>
<item>350</item>
<item>400</item>
<item>450</item>
<item>500</item>
</string-array>
res/xml/sound_settings.xml edit:
Add new line where you want the menu item to appear in the Sound settings menu.
Code:
<SwitchPreferenceScreen android:title="@string/volbtn_toggle_title" android:key="volbtn_music_controls" android:fragment="com.android.settings.VolBtnSettings" />
Smali Edit:
smali/com/android/settings/SoundSettings.smali
Add new line in BLUE
Code:
.field private mVibrateWhenRinging:Landroid/preference/CheckBoxPreference;
[COLOR="Blue"].field private mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
[/COLOR]
.field private mVolume:Lcom/android/settings/RingerVolumePreference;
Increase locals value by 1 indicated in GREEN
Note:
When the change to .locals is increased by one, both of the V7 values in the new lines should be one LESS than the .locals value.
(New .locals value in our example is 8. 8-1=7, so we use V7)
Add new lines indicated in BLUE
Code:
.method private updateState(Z)V
[COLOR="Green"].locals 8
[/COLOR]
const/4 v2, 0x1
const/4 v4, 0x0
invoke-virtual {p0}, Landroid/app/Fragment;->getActivity()Landroid/app/Activity;
move-result-object v0
if-nez v0, :cond_1
:cond_0
:goto_0
return-void
:cond_1
iget-object v0, p0, Lcom/android/settings/SoundSettings;->mAudioManager:Landroid/media/AudioManager;
invoke-virtual {v0}, Landroid/media/AudioManager;->getRingerMode()I
move-result v6
[COLOR="Blue"] iget-object v1, p0, Lcom/android/settings/SoundSettings;->mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
if-eqz v1, :cond_td
iget-object v3, p0, Lcom/android/settings/SoundSettings;->mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
invoke-virtual {p0}, Lcom/android/settings/SoundSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v1
const-string v7, "volbtn_music_controls"
invoke-static {v1, v7, v4}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v1
if-eqz v1, :cond_vol
move v1, v2
:goto_vol
invoke-virtual {v3, v1}, Landroid/preference/SwitchPreferenceScreen;->setChecked(Z)V
:cond_td
[/COLOR] const-string v0, "CTC"
New lines at the end of the same method.
Add lines indicated in BLUE
Code:
.method private updateState(Z)V
.
.
.
goto/16 :goto_1
[COLOR="Blue"] :cond_vol
move v1, v4
goto/16 :goto_vol
[/COLOR].end method
Search for the string "phone_vibration" in SoundSettings.smali and add the new lines indicated in BLUE right above it.
Code:
[COLOR="Blue"]const-string v32, "volbtn_music_controls"
move-object/from16 v0, p0
move-object/from16 v1, v32
invoke-virtual {v0, v1}, Lcom/android/settings/SoundSettings;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v32
check-cast v32, Landroid/preference/SwitchPreferenceScreen;
move-object/from16 v0, v32
move-object/from16 v1, p0
iput-object v0, v1, Lcom/android/settings/SoundSettings;->mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
move-object/from16 v0, p0
iget-object v0, v0, Lcom/android/settings/SoundSettings;->mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
move-object/from16 v32, v0
move-object/from16 v0, v32
move-object/from16 v1, p0
invoke-virtual {v0, v1}, Landroid/preference/Preference;->setOnPreferenceChangeListener(Landroid/preference/Preference$OnPreferenceChangeListener;)V
[/COLOR]
const-string v32, "phone_vibration"
Add new lines indicated in BLUE
Make sure values v2, v3 & v4 values match surrounding code.
Code:
.method public onPreferenceChange(Landroid/preference/Preference;Ljava/lang/Object;)Z
.locals 6
const/4 v0, 0x0
const/4 v1, 0x1
invoke-virtual {p1}, Landroid/preference/Preference;->getKey()Ljava/lang/String;
move-result-object v2
const-string v3, "SoundSettings"
new-instance v4, Ljava/lang/StringBuilder;
invoke-direct {v4}, Ljava/lang/StringBuilder;-><init>()V
const-string v5, "onPreferenceChange : "
invoke-virtual {v4, v5}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v4
invoke-virtual {v4, v2}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v4
invoke-virtual {v4}, Ljava/lang/StringBuilder;->toString()Ljava/lang/String;
move-result-object v4
invoke-static {v3, v4}, Landroid/util/secutil/Log;->secV(Ljava/lang/String;Ljava/lang/String;)I
[COLOR="Blue"]const-string v3, "volbtn_music_controls"
invoke-virtual {v3, v2}, Ljava/lang/String;->equals(Ljava/lang/Object;)Z
move-result v3
if-eqz v3, :cond_td3
check-cast p2, Ljava/lang/Boolean;
invoke-virtual {p2}, Ljava/lang/Boolean;->booleanValue()Z
move-result v3
if-eqz v3, :cond_td4
const/4 v0, 0x1
:goto_td5
invoke-virtual {p0}, Lcom/android/settings/SoundSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
const-string v3, "volbtn_music_controls"
invoke-static {v4, v3, v0}, Landroid/provider/Settings$System;->putInt(Landroid/content/ContentResolver;Ljava/lang/String;I)Z
goto :goto_0
:cond_td4
const/4 v0, 0x0
goto :goto_td5
:cond_td3[/COLOR]
const-string v3, "emergency_tone"
We need to change three public value so compile the changed SecSettings.apk, then decompile it. Open res/values/public.xml and search for the string these strings and write down the public values:
"action_bar_switch_padding"
"volbtn_toggle_title"
"volbtn_settings"
Now in the original SecSettings, open the smali file we added
smali/com/android/settings/VolBtnSettings.smali, search for each of the strings and change your public value to match as indicated in BLUE.
Code:
const v4, 0x[COLOR="Blue"]7f0f0045[/COLOR] # type="dimen" name="action_bar_switch_padding"
const v4, 0x[COLOR="Blue"]7f091a29[/COLOR] # type="string" name="volbtn_toggle_title"
const v0, 0x[COLOR="Blue"]7f0700fe[/COLOR] # type="xml" name="volbtn_settings"
That should be it for SecSettings.apk. Compile after making these last value changes and make sure the Music Control menu functions before continuing with android.policy.jar.
android.policy.jar
(also see additional changes for Android L linked at the bottom of this post)
*** Add the two new files from the android.policy.new_files.zip attached at the bottom of this post.
Smali Edits
smali/com/android/internal/policy/impl/PhoneWindowManager.smali
Add new line in BLUE
Code:
.field private mKeyEventInjectionThread:Ljava/lang/Thread;
[COLOR="Blue"].field mIsVolLongPressed:Z
[/COLOR]
.field mKeyboardTapVibePattern:[J
Add new lines in BLUE
Code:
.field mVirtualKeyVibePattern:[J
[COLOR="Blue"].field mVolBtnMusicControls:I
.field mVolBtnTimeout:I
.field mVolBtnVolDown:I
.field mVolBtnVolUp:I
[/COLOR].field private mVolumeDownKeyConsumedByScreenshotChord:Z
.field private mVolumeDownKeyTime:J
.field private mVolumeDownKeyTriggered:Z
[COLOR="Blue"].field final mVolumeDownLongPress:Ljava/lang/Runnable;
[/COLOR]
.field private mVolumeUpKeyConsumedByScreenshotChord:Z
.field private mVolumeUpKeyTime:J
.field private mVolumeUpKeyTriggered:Z
[COLOR="Blue"].field final mVolumeUpLongPress:Ljava/lang/Runnable;
[/COLOR]
.field mWifiDisplayConnected:Z
Add new lines in BLUE near end of method BEFORE the return-void.
Code:
.method public constructor <init>()V
.
.
.
[COLOR="Blue"] new-instance v0, Lcom/android/internal/policy/impl/PhoneWindowManager$MusicNext;
invoke-direct {v0, p0}, Lcom/android/internal/policy/impl/PhoneWindowManager$MusicNext;-><init>(Lcom/android/internal/policy/impl/PhoneWindowManager;)V
iput-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeUpLongPress:Ljava/lang/Runnable;
new-instance v0, Lcom/android/internal/policy/impl/PhoneWindowManager$MusicPrev;
invoke-direct {v0, p0}, Lcom/android/internal/policy/impl/PhoneWindowManager$MusicPrev;-><init>(Lcom/android/internal/policy/impl/PhoneWindowManager;)V
iput-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeDownLongPress:Ljava/lang/Runnable;
[/COLOR]
return-void
.end method
.method static synthetic access$000(Lcom/android/internal/policy/impl/PhoneWindowManager;)V
Add new methods ABOVE
.method public hasNavigationBar()Z
Code:
.method handleVolumeLongPress(I)V
.locals 4
const/16 v1, 0x18
if-ne p1, v1, :cond_0
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeUpLongPress:Ljava/lang/Runnable;
:goto_0
iget-object v1, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mHandler:Landroid/os/Handler;
iget v2, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnTimeout:I
int-to-long v2, v2
invoke-virtual {v1, v0, v2, v3}, Landroid/os/Handler;->postDelayed(Ljava/lang/Runnable;J)Z
return-void
:cond_0
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeDownLongPress:Ljava/lang/Runnable;
goto :goto_0
.end method
.method handleVolumeLongPressAbort()V
.locals 2
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mHandler:Landroid/os/Handler;
iget-object v1, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeUpLongPress:Ljava/lang/Runnable;
invoke-virtual {v0, v1}, Landroid/os/Handler;->removeCallbacks(Ljava/lang/Runnable;)V
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mHandler:Landroid/os/Handler;
iget-object v1, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeDownLongPress:Ljava/lang/Runnable;
invoke-virtual {v0, v1}, Landroid/os/Handler;->removeCallbacks(Ljava/lang/Runnable;)V
return-void
.end method
The next section may be a little difficult to find.
Search for the string: "interceptKeyBeforeQueueing: VOLUME key-down while ringing: Silence ringer!", scroll up a few lines and place the new lines indicated in BLUE, right below the :sswitch_1 statement.
Important Note:
(AFTER adding the new section below, come back here)
The v12 value may need to be changed to match surrounding code. The next occurrence in our code is this statement:
Code:
invoke-virtual {v0, v12, v6, v5}, Lcom/android/internal/policy/impl/sec/SamsungPhoneWindowManager;->handleSamsungVolumeControl(IZZ)V
Search for the next occurrence of handleSamsungVolumeControl(IZZ)V and if your second values of v12 & v6 match, then you are good to go. If it is NOT, then the v12 & v6 in the new code below needs to be changed to match that value.
Code:
:sswitch_1
[COLOR="Blue"] move-object/from16 v0, p0
iget v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
if-eqz v0, :cond_td
invoke-virtual/range {p0 .. p0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->isMusicActive()Z
move-result v0
if-eqz v0, :cond_td
move-object/from16 v0, p0
iget-boolean v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mScreenOnEarly:Z
if-nez v0, :cond_td
if-eqz v6, :cond_td2
move-object/from16 v0, p0
move/from16 v1, v12
invoke-virtual {v0, v1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeLongPress(I)V
const/4 v15, 0x0
goto/16 :goto_0
:cond_td2
move-object/from16 v0, p0
invoke-virtual {v0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeLongPressAbort()V
iget-boolean v1, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsVolLongPressed:Z
if-nez v1, :cond_td3
move/from16 v1, v12
const/4 v3, 0x3
invoke-virtual {v0, v3, v1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeKey(II)V
:cond_td3
const/4 v1, 0x0
iput-boolean v1, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsVolLongPressed:Z
:cond_td
[/COLOR]
if-eqz v6, :cond_19
invoke-static {}, Lcom/android/internal/policy/impl/PhoneWindowManager;->getTelephonyService()Lcom/android/internal/telephony/ITelephony;
move-result-object v17
if-eqz v17, :cond_19
:try_start_0
invoke-interface/range {v17 .. v17}, Lcom/android/internal/telephony/ITelephony;->isRinging()Z
move-result v21
if-eqz v21, :cond_19
const-string v21, "WindowManager"
const-string v22, "interceptKeyBeforeQueueing: VOLUME key-down while ringing: Silence ringer!"
invoke-static/range {v21 .. v22}, Landroid/util/Log;->i(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface/range {v17 .. v17}, Lcom/android/internal/telephony/ITelephony;->silenceRinger()V
:try_end_0
.catch Landroid/os/RemoteException; {:try_start_0 .. :try_end_0} :catch_0
and-int/lit8 v15, v15, -0x2
Android L version of previous section:
New code is BLUE, make sure the code in GREEN match original
Code:
:sswitch_0
[COLOR="Blue"] move-object/from16 v0, p0
iget v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
if-eqz v0, :cond_td
invoke-virtual/range {p0 .. p0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->isMusicActive()Z
move-result v0
if-eqz v0, :cond_td
move-object/from16 v0, p0
iget-boolean v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mScreenOnEarly:Z
if-nez v0, :cond_td
if-eqz v5, :cond_td2
move-object/from16 v0, p0
move/from16 v1, v11
invoke-virtual {v0, v1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeLongPress(I)V
const/16 v16, 0x0
goto/16[/COLOR] [COLOR="Green"]:goto_8[/COLOR]
[COLOR="Blue"]:cond_td2
move-object/from16 v0, p0
invoke-virtual {v0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeLongPressAbort()V
iget-boolean v1, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsVolLongPressed:Z
if-nez v1, :cond_td3
move/from16 v1, v11
const/4 v3, 0x3
invoke-virtual {v0, v3, v1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeKey(II)V
:cond_td3
const/4 v1, 0x0
iput-boolean v1, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsVolLongPressed:Z
:cond_td[/COLOR]
invoke-virtual/range {p0 .. p0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->getTelecommService()Landroid/telecom/TelecomManager;
move-result-object v17
if-eqz v17, :cond_19
if-eqz v5, :cond_18
invoke-virtual/range {v17 .. v17}, Landroid/telecom/TelecomManager;->isRinging()Z
move-result v21
if-eqz v21, :cond_18
const-string v21, "WindowManager"
const-string v22, "interceptKeyBeforeQueueing: VOLUME key-down while ringing: Silence ringer!"
invoke-static/range {v21 .. v22}, Landroid/util/Log;->i(Ljava/lang/String;Ljava/lang/String;)I
invoke-virtual/range {v17 .. v17}, Landroid/telecom/TelecomManager;->silenceRinger()V
and-int/lit8 v16, v16, -0x2
goto/16 [COLOR="Green"]:goto_8[/COLOR]
Add new method indicated in BLUE:
Code:
.method public isMetaKeyEventRequested(Landroid/content/ComponentName;)Z
.locals 1
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mSystemKeyManager:Lcom/android/internal/policy/impl/sec/SystemKeyManager;
invoke-virtual {v0, p1}, Lcom/android/internal/policy/impl/sec/SystemKeyManager;->isMetaKeyEventRequested(Landroid/content/ComponentName;)Z
move-result v0
return v0
.end method
[COLOR="Blue"].method isMusicActive()Z
.locals 3
iget-object v1, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
const-string v2, "audio"
invoke-virtual {v1, v2}, Landroid/content/Context;->getSystemService(Ljava/lang/String;)Ljava/lang/Object;
move-result-object v0
check-cast v0, Landroid/media/AudioManager;
if-nez v0, :cond_0
const-string v1, "WindowManager"
const-string v2, "isMusicActive: couldn\'t get AudioManager reference"
invoke-static {v1, v2}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
const/4 v1, 0x0
:goto_0
return v1
:cond_0
invoke-virtual {v0}, Landroid/media/AudioManager;->isLocalOrRemoteMusicActive()Z
move-result v1
goto :goto_0
.end method[/COLOR]
Add new method indicated in BLUE:
Code:
.method sendCloseSystemWindows(Ljava/lang/String;)V
.locals 1
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
invoke-static {v0, p1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->sendCloseSystemWindows(Landroid/content/Context;Ljava/lang/String;)V
return-void
.end method
[COLOR="Blue"].method protected sendMediaButtonEvent(I)V
.locals 13
invoke-static {}, Landroid/os/SystemClock;->uptimeMillis()J
move-result-wide v1
new-instance v11, Landroid/content/Intent;
const-string v4, "android.intent.action.MEDIA_BUTTON"
const/4 v5, 0x0
invoke-direct {v11, v4, v5}, Landroid/content/Intent;-><init>(Ljava/lang/String;Landroid/net/Uri;)V
new-instance v0, Landroid/view/KeyEvent;
const/4 v5, 0x0
const/4 v7, 0x0
move-wide v3, v1
move v6, p1
invoke-direct/range {v0 .. v7}, Landroid/view/KeyEvent;-><init>(JJIII)V
invoke-virtual {p0, v0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->dispatchMediaKeyWithWakeLockToAudioService(Landroid/view/KeyEvent;)V
const/16 v2, 0x1
invoke-static {v0, v2}, Landroid/view/KeyEvent;->changeAction(Landroid/view/KeyEvent;I)Landroid/view/KeyEvent;
move-result-object v0
invoke-virtual {p0, v0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->dispatchMediaKeyWithWakeLockToAudioService(Landroid/view/KeyEvent;)V
return-void
const-string v4, "android.intent.extra.KEY_EVENT"
invoke-virtual {v11, v4, v0}, Landroid/content/Intent;->putExtra(Ljava/lang/String;Landroid/os/Parcelable;)Landroid/content/Intent;
iget-object v4, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
const/4 v5, 0x0
invoke-virtual {v4, v11, v5}, Landroid/content/Context;->sendOrderedBroadcast(Landroid/content/Intent;Ljava/lang/String;)V
new-instance v12, Landroid/content/Intent;
const-string v4, "android.intent.action.MEDIA_BUTTON"
const/4 v5, 0x0
invoke-direct {v12, v4, v5}, Landroid/content/Intent;-><init>(Ljava/lang/String;Landroid/net/Uri;)V
new-instance v3, Landroid/view/KeyEvent;
const/4 v8, 0x1
const/4 v10, 0x0
move-wide v4, v1
move-wide v6, v1
move v9, p1
invoke-direct/range {v3 .. v10}, Landroid/view/KeyEvent;-><init>(JJIII)V
const-string v4, "android.intent.extra.KEY_EVENT"
invoke-virtual {v12, v4, v3}, Landroid/content/Intent;->putExtra(Ljava/lang/String;Landroid/os/Parcelable;)Landroid/content/Intent;
iget-object v4, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
const/4 v5, 0x0
invoke-virtual {v4, v12, v5}, Landroid/content/Context;->sendOrderedBroadcast(Landroid/content/Intent;Ljava/lang/String;)V
return-void
.end method[/COLOR]
Add new lines indicated in BLUE
NOTE:
Make note of the value of the line in GREEN.
If your value is different, the 4 occurrences of v13 in our new code must also be changed to match.
Example:
If your line before the new code is:
move-result-object v8
You would change the 4 values of v13 to v8.
Code:
.method public updateSettings()V
.locals 23
move-object/from16 v0, p0
iget-object v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
move-object/from16 v18, v0
invoke-virtual/range {v18 .. v18}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
[COLOR="Green"]move-result-object v13
[/COLOR]
[COLOR="Blue"]const-string v7, "volbtn_music_controls"
const/4 v9, 0x0
invoke-static {v13, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
const-string v7, "volbtn_timeout"
const/16 v9, 0x190
invoke-static {v13, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnTimeout:I
const-string v7, "volbtn_vol_up"
const/16 v9, 0x57
invoke-static {v13, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolUp:I
const-string v7, "volbtn_vol_down"
const/16 v9, 0x58
invoke-static {v13, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolDown:I[/COLOR]
Android L Version of previous section:
New code is in BLUE
Code:
.method public updateSettings()V
.locals 19
move-object/from16 v0, p0
iget-object v15, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
invoke-virtual {v15}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v9
[COLOR="Blue"]const-string v7, "volbtn_music_controls"
const/4 v10, 0x0
invoke-static {v9, v7, v10}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
const-string v7, "volbtn_timeout"
const/16 v10, 0x190
invoke-static {v9, v7, v10}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnTimeout:I
const-string v7, "volbtn_vol_up"
const/16 v10, 0x57
invoke-static {v9, v7, v10}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolUp:I
const-string v7, "volbtn_vol_down"
const/16 v10, 0x58
invoke-static {v9, v7, v10}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolDown:I[/COLOR]
Smali edit
\com\android\internal\policy\impl\PhoneWindowManager$SettingsObserver.smali
Search for string "immersive_mode_confirmations" and add new section in BLUE right above that line.
Make sure the values above in GREEN match the new code.
Code:
const-string v1, "default_input_method"
invoke-static {v1}, Landroid/provider/Settings$Secure;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {[COLOR="Green"]v0, v1, v4, p0, v5[/COLOR]}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
[COLOR="Blue"] const-string v1, "volbtn_music_controls"
invoke-static {v1}, Landroid/provider/Settings$System;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {v0, v1, v4, p0, v5}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
const-string v1, "volbtn_timeout"
invoke-static {v1}, Landroid/provider/Settings$System;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {v0, v1, v4, p0, v5}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
const-string v1, "volbtn_vol_up"
invoke-static {v1}, Landroid/provider/Settings$System;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {v0, v1, v4, p0, v5}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
const-string v1, "volbtn_vol_down"
invoke-static {v1}, Landroid/provider/Settings$System;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {v0, v1, v4, p0, v5}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
[/COLOR]
const-string v1, "immersive_mode_confirmations"
Android L UPDATE:
Additional Android L Changes
Additional changes for Android L are here --->> Android L amended guide
Credits: @loserskater for the orginal mod HERE ; @jeboo for his GitHub HERE @sac23 for the tremendous help getting framework.jar changes

tdunham said:
[Guide How-to] KitKat 4.4.2 Music Control - Volume Music Skip and More
This guide requires knowledge of decompiling and compiling apk and smali files.
It is only a guide.
I do not take requests. If you want this mod for your rom, get with a dev with the knowledge to get it done.
I have attached android.policy files for diffing in case you get stuck on a section.
Click to expand...
Click to collapse
Thank you, thank. You are a god...
Sent from my SM-T320 using Xparent BlueTapatalk 2

Gotta agree with the above post... You are awesome dude...
Are you about to ask a question? Hold up. Before you do that, did you check HERE? or HERE? :good:
FOR ANY ND8 RELATED QUESTIONS PLEASE VISIT THIS THREAD ----> TouchWiz 4.4 KitKat ND8 myth busters
My KITKAT 4.4.2 Touchwiz, Blue PCB Theme
TOUCHWIZ KITKAT ANIMATED PULLDOWN BAR AND ANIMATED PULLDOWN BACKGROUND MOD​

Another awesome guide TD! Thank you for sharing your knowledge with the community!
Sent from my SM-G900P using Tapatalk

@tdunham, you point to the VolBtnSettings in the settings.apk, but you didn't attach the files. Just giving you a heads up. Glad to see my work lives on! Thanks for updating this :good:

loserskater said:
@tdunham, you point to the VolBtnSettings in the settings.apk, but you didn't attach the files. Just giving you a heads up. Glad to see my work lives on! Thanks for updating this :good:
Click to expand...
Click to collapse
Thanks. I'm glad someone's looking out for me.

Thanks a ton for sharing your knowledge. You're a real class act man!

Appreciate you sharing the knowledge, thank you sir.

Delete

tdunham said:
Thanks. I'm glad someone's looking out for me.
Click to expand...
Click to collapse
Hey @tdunham...this is the first time for me using <SwitchPreferenceScreen in any mod...there shouldn't be a problem with me adding an icon to line should there?
<SwitchPreferenceScreen android:icon="@drawable/xxxxxxxx" android:title="@string/volbtn_toggle_title" android:key="volbtn_music_controls" android:fragment="com.android.settings.VolBtnSettings" />
Edit: I'll post pics when I'm done

deuce_biggins said:
Hey @tdunham...this is the first time for me using <SwitchPreferenceScreen in any mod...there shouldn't be a problem with me adding an icon to line should there?
<SwitchPreferenceScreen android:icon="@drawable/xxxxxxxx android:title="@string/volbtn_toggle_title" android:key="volbtn_music_controls" android:fragment="com.android.settings.VolBtnSettings" />
Click to expand...
Click to collapse
I don't see why not.
The good thing about SecSettings is that modifying it won't cause a bootloop, just a force close when you try to access the part of it that isn't coded properly.
However, why set an icon? This is a submenu of sounds and not a single item has an icon, stock Touchwiz of course. I just checked on my Galaxy SIII KitKat and the same goes there.
My SS is attached (without this menu item, we use CustomSettings.apk for toggles, colorizers & scripts).

Anyone get the android.policy edits right on the Sprint Note 3?

If someone with the know-how could take a look at my PhoneWindowsManager I'd sure be greatful. I'll leave it here......PhoneWindowsManager.smali
This is an error I'm getting when I...1 2 3 4 screenshot!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you

Once again my Sammy tablet is a bit diff...
Code:
.method public updateSettings()V
.locals 17
.prologue
.line 1714
move-object/from16 v0, p0
iget-object v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
invoke-virtual {v12}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v8
.line 1715
.local v8, resolver:Landroid/content/ContentResolver;
const/4 v9, 0x0
.line 1722
.local v9, updateRotation:Z
const-string v12, "multi_window_enabled"
const/4 v13, 0x0
const/4 v14, -0x2
invoke-static {v8, v12, v13, v14}, Landroid/provider/Settings$System;->getIntForUser(Landroid/content/ContentResolver;Ljava/lang/String;II)I
move-result v1
.line 1726
.local v1, enableMultiWindowUISetting:I
move-object/from16 v0, p0
iget-object v13, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mLock:Ljava/lang/Object;
monitor-enter v13
.line 1728
:try_start_0
move-object/from16 v0, p0
iget-boolean v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsMultiWindowEnabled:Z
if-eqz v12, :cond_1
.line 1729
move-object/from16 v0, p0
iget-boolean v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mSystemReady:Z
if-eqz v12, :cond_1
.line 1730
move-object/from16 v0, p0
iget v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mEnableMultiWindowUISetting:I
const/4 v14, -0x1
if-ne v12, v14, :cond_c
.line 1731
move-object/from16 v0, p0
iget-object v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
invoke-virtual {v12}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v12
const-string v14, "multi_window_flashbar_shown"
const/4 v15, -0x1
const/16 v16, -0x2
move/from16 v0, v16
invoke-static {v12, v14, v15, v0}, Landroid/provider/Settings$System;->getIntForUser(Landroid/content/ContentResolver;Ljava/lang/String;II)I
move-result v6
.line 1734
.local v6, lastFlashBarVisibility:I
if-nez v6, :cond_b
Where and how to put this last piece of code. in. I have tried several times, but all I get is Sammy Logo. No boot...
Code:
#Music Mod
const-string v7, "volbtn_music_controls"
const/4 v9, 0x0
invoke-static {v12, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
const-string v7, "volbtn_timeout"
const/16 v9, 0x190
invoke-static {v12, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnTimeout:I
const-string v7, "volbtn_vol_up"
const/16 v9, 0x57
invoke-static {v12, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolUp:I
const-string v7, "volbtn_vol_down"
const/16 v9, 0x58
invoke-static {v12, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolDown:I
#End of Add - Music Mod

1brainsurgeon said:
If someone with the know-how could take a look at my PhoneWindowsManager I'd sure be greatful. I'll leave it here......PhoneWindowsManager.smali
This is an error I'm getting when I...1 2 3 4 screenshot!
Thank you
Click to expand...
Click to collapse
The error is somewhere on or around line 16553 is what the baksmali is reporting there.

Gunthermic said:
Once again my Sammy tablet is a bit diff...
Click to expand...
Click to collapse
Line right before adding the new section:
Code:
move-result-object v8
You didn't use v8 in the 4 places like I recommended in the guide to replace v13 in the new code.

tdunham said:
Line right before adding the new section:
Code:
move-result-object v8
You didn't use v8 in the 4 places like I recommended in the guide to replace v13 in the new code.
Click to expand...
Click to collapse
Will try again. I actually tried be and v12.. but maybe the placement is the screwy part... will try and see.
Thank you for helping tdun
Sent from my SM-T320 using Xparent BlueTapatalk 2

Gunthermic said:
Will try again. I actually tried be and v12.. but maybe the placement is the screwy part... will try and see.
Click to expand...
Click to collapse
It HAS to be v8 in those 4 places but maybe we need to change some other values too. Let me know how you make out.

tdunham said:
It HAS to be v8 in those 4 places but maybe we need to change some other values too. Let me know how you make out.
Click to expand...
Click to collapse
I will try v8... I think that is the area that can cause a big issue... I will report back....
Sent from my SM-T320 using Xparent BlueTapatalk 2

Question. I haven't had time to try the android policy edits yet but finished settings.... I tried to click the menu in settings to see if it works.... But get an fc in tap, menu won't even open..... Is this due to not doing the policy edits yet.... Or should it at least open anyways? Curious if I should go back thru settings or not.
Thanks.

[GUIDE][CM9-11] Add partition info in Settings.apk

Assalamualaikum
Hello guys, i want to share a simple guide with you
WHAT IS IT?
it's a guide to make a partition info in the Settings.apk
Source:
SCREENSHOT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok, let's start working on it
WHATS NEEDED?
- Brain
- A cup of coffe
- Use Apktool v 2.0.0 beta 9
- Settings.apk
- Attachment file
1. Decompile your Settings.apk
2. Download and extrack Attachment file and place it in the right place
3. Go to the ~\Settings\res\values\strings.xml
Add this code below before </resources>
Code:
<string name="partition_info_title">Partition info</string>
<string name="partition_info_system">/system</string>
<string name="partition_info_data">/data</string>
<string name="partition_info_cache">/cache</string>
<string name="partition_info_sdcard">/sdcard (FAT)</string>
<string name="partition_info_sdext">/sd-ext (EXT)</string>
<string name="partition_info_used_of">/</string>
<string name="nol">Unavailable</string>
</resources>
3. Go to the ~\Settings\res\xml\settings_headers.xml
Add this code below wherever you want inside settings_headers.xml
Code:
<header android:icon="@drawable/partition_info" android:title="@string/partition_info_title">
<intent android:targetPackage="com.android.settings" android:action="com.android.action.MAIN" android:targetClass="com.android.settings.ktech.PartitionInfo" />
</header>
4. Compile your Settings.apk and decompile again
5. Go to ~\Settings\AndroidManifest.xml
Code:
<activity android:label="@string/partition_info_title" android:name=".ktech.PartitionInfo">
<intent-filter>
<action android:name="android.intent.action.MAIN"/>
<category android:name="android.intent.category.DEFAULT"/>
<category android:name="android.intent.category.VOICE_LAUNCH"/>
</intent-filter>
</activity>
6. Go to the ~\Settings\smali\com\android\settings\ktech\PartitionInfo.smali
Find & replace this code below with your public id
Code:
Line 110 0x7f080403 public type="string" name="partition_info_used_of"
Line 189 0x7f050043 public type="xml" name="partition_info"
7. Recompile Settings.apk then Sign it
8. Push it in your phone

hi i have one problem i make all the steps and im getting fc of settings when im pushing ''partition info'' and then i see that after decompile (the second decompile) the partition_info is in pyblic type drawable and not in pyblic type xml im trying 5 times but nothing (sorry for my bad english)

G.M.L said:
hi i have one problem i make all the steps and im getting fc of settings when im pushing ''partition info'' and then i see that after decompile (the second decompile) the partition_info is in pyblic type drawable and not in pyblic type xml im trying 5 times but nothing (sorry for my bad english)
Click to expand...
Click to collapse
Post your log here

Here is it

OK I made it I changed the icon name in drawable-hdpi and after decomplile (the second time) in public the names are correct thanks k_tech!!!!!!
G.M.L.

G.M.L said:
OK I made it I changed the icon name in drawable-hdpi and after decomplile (the second time) in public the names are correct thanks k_tech!!!!!!
G.M.L.
Click to expand...
Click to collapse
Ok, good job

Thx sir, its work on my LG P713 (4.1.2)

Thx sir...

step6 is little confusing....could u plz be in detail.

rrajesh011 said:
step6 is little confusing....could u plz be in detail.
Click to expand...
Click to collapse
Open smali/com/android/settings/k_tech/partitioninfo.smali and leave it open
Open value/public.xml and find
type=string name=partition_info_used_of id=this number copy and paste to partition info.smali in line 1100
And
type=xml name=partition_info id=this number copy and paste in partition info.Smali in line 1890
Compile and its ready!!!
G.M.L.

G.M.L said:
Open smali/com/android/settings/k_tech/partitioninfo.smali and leave it open
Open value/public.xml and find
type=string name=partition_info_used_of id=this number copy and paste to partition info.smali in line 1100
And
type=xml name=partition_info id=this number copy and paste in partition info.Smali in line 1890
Compile and its ready!!!
G.M.L.
Click to expand...
Click to collapse
this is my partitioninfo.smali i didnot find line 189. i found line 110 but where to add public id.
Code:
.class public Lcom/android/settings/ktech/PartitionInfo;
.super Landroid/preference/PreferenceActivity;
.source "PartitionInfo.java"
# instance fields
.field private extfsIsMounted:Z
.field private mCachePartSize:Landroid/preference/Preference;
.field private mDataPartSize:Landroid/preference/Preference;
.field private mSDCardPartEXTSize:Landroid/preference/Preference;
.field private mSDCardPartFATSize:Landroid/preference/Preference;
.field private mSystemPartSize:Landroid/preference/Preference;
# direct methods
.method public constructor <init>()V
.locals 1
.prologue
.line 45
invoke-direct {p0}, Landroid/preference/PreferenceActivity;-><init>()V
.line 60
const/4 v0, 0x0
iput-boolean v0, p0, Lcom/android/settings/ktech/PartitionInfo;->extfsIsMounted:Z
return-void
.end method
.method private ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
.locals 11
.param p1, "PartitionPath" # Ljava/lang/String;
.prologue
.line 103
new-instance v4, Ljava/io/File;
invoke-direct {v4, p1}, Ljava/io/File;-><init>(Ljava/lang/String;)V
.line 104
.local v4, "extraPath":Ljava/io/File;
new-instance v5, Landroid/os/StatFs;
invoke-virtual {v4}, Ljava/io/File;->getPath()Ljava/lang/String;
move-result-object v7
invoke-direct {v5, v7}, Landroid/os/StatFs;-><init>(Ljava/lang/String;)V
.line 105
.local v5, "extraStat":Landroid/os/StatFs;
invoke-virtual {v5}, Landroid/os/StatFs;->getBlockSize()I
move-result v7
int-to-long v0, v7
.line 106
.local v0, "eBlockSize":J
invoke-virtual {v5}, Landroid/os/StatFs;->getBlockCount()I
move-result v7
int-to-long v2, v7
.line 107
.local v2, "eTotalBlocks":J
mul-long v7, v2, v0
invoke-virtual {v5}, Landroid/os/StatFs;->getAvailableBlocks()I
move-result v9
int-to-long v9, v9
mul-long/2addr v9, v0
sub-long/2addr v7, v9
invoke-static {p0, v7, v8}, Landroid/text/format/Formatter;->formatFileSize(Landroid/content/Context;J)Ljava/lang/String;
move-result-object v6
.line 108
.local v6, "retstr":Ljava/lang/String;
new-instance v7, Ljava/lang/StringBuilder;
invoke-direct {v7}, Ljava/lang/StringBuilder;-><init>()V
invoke-virtual {v7, v6}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
const-string v8, " "
invoke-virtual {v7, v8}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
invoke-virtual {p0}, Lcom/android/settings/ktech/PartitionInfo;->getResources()Landroid/content/res/Resources;
move-result-object v8
const v9, 0x7f080403
invoke-virtual {v8, v9}, Landroid/content/res/Resources;->getString(I)Ljava/lang/String;
move-result-object v8
invoke-virtual {v7, v8}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
const-string v8, " "
invoke-virtual {v7, v8}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
invoke-virtual {v7}, Ljava/lang/StringBuilder;->toString()Ljava/lang/String;
move-result-object v6
.line 109
new-instance v7, Ljava/lang/StringBuilder;
invoke-direct {v7}, Ljava/lang/StringBuilder;-><init>()V
invoke-virtual {v7, v6}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
mul-long v8, v2, v0
invoke-static {p0, v8, v9}, Landroid/text/format/Formatter;->formatFileSize(Landroid/content/Context;J)Ljava/lang/String;
move-result-object v8
invoke-virtual {v7, v8}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v7
invoke-virtual {v7}, Ljava/lang/StringBuilder;->toString()Ljava/lang/String;
move-result-object v6
.line 110
return-object v6
.end method
# virtual methods
.method public fileExists(Ljava/lang/String;)Z
.locals 2
.param p1, "filename" # Ljava/lang/String;
.prologue
.line 114
new-instance v0, Ljava/io/File;
invoke-direct {v0, p1}, Ljava/io/File;-><init>(Ljava/lang/String;)V
.line 115
.local v0, "f":Ljava/io/File;
invoke-virtual {v0}, Ljava/io/File;->exists()Z
move-result v1
return v1
.end method
.method protected onCreate(Landroid/os/Bundle;)V
.locals 5
.param p1, "icicle" # Landroid/os/Bundle;
.prologue
const/4 v4, 0x1
.line 64
invoke-super {p0, p1}, Landroid/preference/PreferenceActivity;->onCreate(Landroid/os/Bundle;)V
.line 66
const v2, 0x7f050043
invoke-virtual {p0, v2}, Lcom/android/settings/ktech/PartitionInfo;->addPreferencesFromResource(I)V
.line 68
invoke-virtual {p0}, Lcom/android/settings/ktech/PartitionInfo;->getPreferenceScreen()Landroid/preference/PreferenceScreen;
move-result-object v1
.line 70
.local v1, "prefSet":Landroid/preference/PreferenceScreen;
const-string v2, "system_part_info"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSystemPartSize:Landroid/preference/Preference;
.line 71
const-string v2, "data_part_info"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mDataPartSize:Landroid/preference/Preference;
.line 72
const-string v2, "cache_part_info"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mCachePartSize:Landroid/preference/Preference;
.line 73
const-string v2, "sdcard_part_info_fat"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartFATSize:Landroid/preference/Preference;
.line 74
const-string v2, "sdcard_part_info_ext"
invoke-virtual {v1, v2}, Landroid/preference/PreferenceScreen;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v2
iput-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartEXTSize:Landroid/preference/Preference;
.line 76
const-string v2, "/dev/block/mmcblk0p2"
invoke-virtual {p0, v2}, Lcom/android/settings/ktech/PartitionInfo;->fileExists(Ljava/lang/String;)Z
move-result v2
if-ne v2, v4, :cond_0
.line 77
const-string v2, "PartitionInfo"
const-string v3, "sd: ext partition mounted"
invoke-static {v2, v3}, Landroid/util/Log;->i(Ljava/lang/String;Ljava/lang/String;)I
.line 78
iput-boolean v4, p0, Lcom/android/settings/ktech/PartitionInfo;->extfsIsMounted:Z
.line 84
:goto_0
:try_start_0
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSystemPartSize:Landroid/preference/Preference;
const-string v3, "/system"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 85
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mDataPartSize:Landroid/preference/Preference;
const-string v3, "/data"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 86
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mCachePartSize:Landroid/preference/Preference;
const-string v3, "/cache"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 87
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartFATSize:Landroid/preference/Preference;
const-string v3, "/sdcard"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
.line 89
iget-boolean v2, p0, Lcom/android/settings/ktech/PartitionInfo;->extfsIsMounted:Z
if-ne v2, v4, :cond_1
.line 90
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartEXTSize:Landroid/preference/Preference;
const-string v3, "/external_sd"
invoke-direct {p0, v3}, Lcom/android/settings/ktech/PartitionInfo;->ObtainFSPartSize(Ljava/lang/String;)Ljava/lang/String;
move-result-object v3
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setSummary(Ljava/lang/CharSequence;)V
:try_end_0
.catch Ljava/lang/IllegalArgumentException; {:try_start_0 .. :try_end_0} :catch_0
.line 99
:goto_1
return-void
.line 80
:cond_0
const-string v2, "PartitionInfo"
const-string v3, "sd: ext partition not mounted"
invoke-static {v2, v3}, Landroid/util/Log;->i(Ljava/lang/String;Ljava/lang/String;)I
goto :goto_0
.line 92
:cond_1
:try_start_1
iget-object v2, p0, Lcom/android/settings/ktech/PartitionInfo;->mSDCardPartEXTSize:Landroid/preference/Preference;
const/4 v3, 0x0
invoke-virtual {v2, v3}, Landroid/preference/Preference;->setEnabled(Z)V
:try_end_1
.catch Ljava/lang/IllegalArgumentException; {:try_start_1 .. :try_end_1} :catch_0
goto :goto_1
.line 95
:catch_0
move-exception v0
.line 96
.local v0, "e":Ljava/lang/IllegalArgumentException;
invoke-virtual {v0}, Ljava/lang/IllegalArgumentException;->printStackTrace()V
goto :goto_1
.end method

Change
0x7f080403 in line 110 with the id of partition_info_used_of
and
0x7f050058 in line 189 with the id of partition_info

Thanks

nice sir.
but i have problem, for /sd-ext(EXT) is displayed unavailable. i have 16gb external storage..
My rom is stock 4.1.2 touchwiz.
hope can fix :fingers-crossed:

syaeful said:
nice sir.
but i have problem, for /sd-ext(EXT) is displayed unavailable. i have 16gb external storage..
My rom is stock 4.1.2 touchwiz.
hope can fix :fingers-crossed:
Click to expand...
Click to collapse
Try this smali and tell me if it work

G.M.L said:
Try this smali and tell me if it work
Click to expand...
Click to collapse
thanks sir... i will try and give feedback later
---------- Post added at 10:23 AM ---------- Previous post was at 10:04 AM ----------
Still same sir,,

syaeful said:
thanks sir... i will try and give feedback later
---------- Post added at 10:23 AM ---------- Previous post was at 10:04 AM ----------
Still same sir,,
Click to expand...
Click to collapse
I will check it again later and I will tell you
G.M.L.

syaeful said:
thanks sir... i will try and give feedback later
---------- Post added at 10:23 AM ---------- Previous post was at 10:04 AM ----------
Still same sir,,
Click to expand...
Click to collapse
in partition_info.xml try to change @string/nol with @string/status_unavailable and tell me
in Android_manifest.xml did you add the activity?

G.M.L said:
in partition_info.xml try to change @string/nol with @string/status_unavailable and tell me
in Android_manifest.xml did you add the activity?
Click to expand...
Click to collapse
i have done with manifest..
i wil try for strings. thanks before

G.M.L said:
Try this smali and tell me if it work
Click to expand...
Click to collapse
thank you. ROM cook me JB 4.1.2
i try this smali

(Tutorial) Stock LG Rom (v30 or Other) Call Recording and Other Mods

Hi, in this post, I will tell those who are curious about where to change the stock files. I think it will work on all classic LG phones and Oreo / Pie roms.
I shared it in detail. Don't ask questions, please.
Some minor details (like line numbers) on all phones and roms may be different.
It is yours to find similar codes and bring comments .
Will Be Required:
- LG Phones with Stock Rom (Oreo or Pie)
- You should know how to make Compile / Decompile apk
- Your device must be rooted
- TWRP must be installed to flash modded files
Enable Auto Call Recording with Menu :
Required Files : LGInCallUI.apk , LGTeleService.apk
1 - Decompile LGInCallUI.apk and open with text editor this file " LGInCallUI\smali\com\android\incallui\util\InCallFeature.smali "
2 - - Find " .method public static supportVoiceRecord()Z " value and change color line to
Code:
.method public static supportVoiceRecord()Z
.locals 1
.prologue
.line 245
sget-object v0, Lcom/lge/phone/common/Device$Country;->KR:Lcom/lge/phone/common/Device$Country;
invoke-static {v0}, Lcom/lge/phone/common/Device;->of(Lcom/lge/phone/common/Device$Country;)Z
move-result v0
if-nez v0, :cond_0
sget-object v0, Lcom/lge/phone/common/Device$Operator;->KDDI:Lcom/lge/phone/common/Device$Operator;
invoke-static {v0}, Lcom/lge/phone/common/Device;->of(Lcom/lge/phone/common/Device$Operator;)Z
move-result v0
if-nez v0, :cond_0
sget-object v0, Lcom/lge/phone/common/Device$Country;->CN:Lcom/lge/phone/common/Device$Country;
invoke-static {v0}, Lcom/lge/phone/common/Device;->of(Lcom/lge/phone/common/Device$Country;)Z
move-result v0
if-nez v0, :cond_0
sget-object v0, Lcom/lge/phone/common/Device$Country;->CIS:Lcom/lge/phone/common/Device$Country;
.line 246
invoke-static {v0}, Lcom/lge/phone/common/Device;->of(Lcom/lge/phone/common/Device$Country;)Z
move-result v0
if-eqz v0, :cond_1
.line 247
invoke-static {}, Lcom/android/incallui/util/ConfigUtils;->isMTK()Z
move-result v0
if-nez v0, :cond_1
.line 248
:cond_0
[COLOR="Red"]const/4 v0, 0x1[/COLOR] [COLOR="Blue"]-----> Change this line to --> const/4 v0, 0x0[/COLOR]
.line 250
:goto_0
return v0
:cond_1
[COLOR="Red"]const/4 v0, 0x0[/COLOR] [COLOR="Blue"]-----> Change this line to --> const/4 v0, 0x1[/COLOR]
goto :goto_0
.end method
You can recompile our job.
3 - Decompile LGTeleService.apk and open with text editor this file " LGTeleService\smali\com\lge\common\ConfigUtils.smali "
4 - Find " .method public static supportVoiceRecord()Z " value and change color line to
Code:
.method public static supportVoiceRecord()Z
.locals 1
.prologue
.line 729
sget-object v0, Lcom/lge/phone/common/Device$Country;->KR:Lcom/lge/phone/common/Device$Country;
invoke-static {v0}, Lcom/lge/phone/common/Device;->of(Lcom/lge/phone/common/Device$Country;)Z
move-result v0
if-eqz v0, :cond_0
sget-object v0, Lcom/lge/phone/common/Device$Operator;->OPEN:Lcom/lge/phone/common/Device$Operator;
invoke-static {v0}, Lcom/lge/phone/common/Device;->of(Lcom/lge/phone/common/Device$Operator;)Z
move-result v0
if-eqz v0, :cond_1
:cond_0
sget-object v0, Lcom/lge/phone/common/Device$Operator;->KDDI:Lcom/lge/phone/common/Device$Operator;
invoke-static {v0}, Lcom/lge/phone/common/Device;->of(Lcom/lge/phone/common/Device$Operator;)Z
move-result v0
if-nez v0, :cond_1
sget-object v0, Lcom/lge/phone/common/Device$Country;->CN:Lcom/lge/phone/common/Device$Country;
invoke-static {v0}, Lcom/lge/phone/common/Device;->of(Lcom/lge/phone/common/Device$Country;)Z
move-result v0
if-nez v0, :cond_1
sget-object v0, Lcom/lge/phone/common/Device$Country;->CIS:Lcom/lge/phone/common/Device$Country;
.line 730
invoke-static {v0}, Lcom/lge/phone/common/Device;->of(Lcom/lge/phone/common/Device$Country;)Z
move-result v0
if-eqz v0, :cond_2
.line 731
invoke-static {}, Lcom/lge/common/ConfigUtils;->isMTK()Z
move-result v0
if-nez v0, :cond_2
.line 732
:cond_1
[COLOR="Red"]const/4 v0, 0x1[/COLOR] [COLOR="Blue"]-----> Change this line to --> const/4 v0, 0x0[/COLOR]
.line 734
:goto_0
return v0
:cond_2
[COLOR="Red"]const/4 v0, 0x0[/COLOR] [COLOR="Blue"]-----> Change this line to --> const/4 v0, 0x1[/COLOR]
goto :goto_0
.end method
Two Files are ready. Recompile and flash with TWRP.
Good Luck !
Other modes are available in the second post but are briefly described.

Other Mods..
Replace red lines with blue values.
Add magenta lines
1- Answer Call with the Volume key
Decompile services.jar and open with text editor this file "Decompiled_apk\services\smali\com\android\server\policy\PhoneWindowManager.smali"
Code:
29498 .line 6996
29499 const-string/jumbo v24, "WindowManager"
29500
29501 const-string/jumbo v25, "interceptKeyBeforeQueueing: VOLUME key-down while ringing: Silence ringer!"
29502
29503 invoke-static/range {v24 .. v25}, Landroid/util/Log;->i(Ljava/lang/String;Ljava/lang/String;)I
29504
29505 .line 7001
[COLOR="Red"]29506 invoke-virtual/range {v22 .. v22}, Landroid/telecom/TelecomManager;->silenceRinger()V[/COLOR]
[COLOR="Blue"]29506 invoke-virtual/range {v22 .. v22}, Landroid/telecom/TelecomManager;->acceptRingingCall()V
[/COLOR]
2- Power Key End Call - Even if the screen is off (While in the ear during the call)
Decompile services.jar and open with text editor this file "Decompiled_apk\services\smali\com\android\server\policy\LGPhoneWindowManager.smali"
Code:
2102 invoke-static {v10}, Lcom/android/server/policy/SmartCoverStatus;->isCoverClosed(I)Z
2103
2104 move-result v10
2105
2106 .line 1644
[COLOR="Red"]2107 if-eqz v10, :cond_8[/COLOR]
[COLOR="blue"]2107 if-nez v10, :cond_8[/COLOR]
2231 invoke-static {v0}, Lcom/android/server/policy/SmartCoverStatus;->isCoverClosed(I)Z
2232
2233 move-result v0
2234
2235 .line 1545
[COLOR="Red"]2236 if-eqz v0, :cond_1[/COLOR]
[COLOR="blue"]2236 if-nez v0, :cond_1[/COLOR]
3- Screen Off Qmemo Shortcut (Volume Key) open Flashlight
This mode required wipe cache/dalvik after every restart.
Decompile services.jar and open with text editor this file "Decompiled_apk\services\smali\com\android\server\policy\FlashLightExecutor.smali"
Code:
726 # virtual methods
.
.
738 .method public executeDoublePress()V
739 .locals 0
740
741 .prologue
742 .line 65
[COLOR="Magenta"]743 invoke-direct {p0}, Lcom/android/server/policy/FlashLightExecutor;->executeFlashLightToggle()V [COLOR="Magenta"]------> Add this line[/COLOR]
744
745 .line 66[/COLOR] [COLOR="Magenta"]------> Add this line[/COLOR]
746 return-void
747 .end method
748
open with text editor this file "Decompiled_apk\services\smali\com\android\server\policy\LGPhoneWindowManager.smali"
Code:
[COLOR="Red"]32 field private static final EXECUTE_QMEMO_BY_SHORT_CUT:I = 0x2[/COLOR]
[COLOR="Blue"]32 field private static final EXECUTE_FLASH_LIGHT_BY_SHORT_CUT:I = 0x2[/COLOR]
[COLOR="red"]752 iput-object v5, p0, Lcom/android/server/policy/LGPhoneWindowManager;->mQMemoExecutor:Lcom/android/server/policy/QMemoExecutor;[/COLOR]
[COLOR="blue"]752 iput-object v5, p0, Lcom/android/server/policy/LGPhoneWindowManager;->mFlashLightExecutor:Lcom/android/server/policy/FlashLightExecutor;[/COLOR]
[COLOR="red"]764 iput-object v5, p0, Lcom/android/server/policy/LGPhoneWindowManager;->mFlashLightExecutor:Lcom/android/server/policy/FlashLightExecutor;[/COLOR]
[COLOR="blue"]764 iput-object v5, p0, Lcom/android/server/policy/LGPhoneWindowManager;->mQMemoExecutor:Lcom/android/server/policy/QMemoExecutor;
[/COLOR]
[COLOR="red"]5832 iget-object v1, p0, Lcom/android/server/policy/LGPhoneWindowManager;->mQMemoExecutor:Lcom/android/server/policy/QMemoExecutor;[/COLOR]
[COLOR="blue"]5832 iget-object v1, p0, Lcom/android/server/policy/LGPhoneWindowManager;->mFlashLightExecutor:Lcom/android/server/policy/FlashLightExecutor;
[/COLOR]
[COLOR="Red"]5837 iget-object v0, p0, Lcom/android/server/policy/LGPhoneWindowManager;->mQMemoExecutor:Lcom/android/server/policy/QMemoExecutor;[/COLOR]
[COLOR="blue"]5837 iget-object v0, p0, Lcom/android/server/policy/LGPhoneWindowManager;->mFlashLightExecutor:Lcom/android/server/policy/FlashLightExecutor;[/COLOR]
Good Luck..

Can this technique work for LG V60 Android11 ?