Database Develop

[Q] Car Bluetooth: Problems connecting

Here is what I see:
1. 1st time pairing - Both phone and media audio work fine.
2. Next time whenever I would get in the car: Nothing connects automatically. I try to connect manually from the phone, and it takes a while, and media audio connects. Phone audio fails.
3. Now if I go to advanced options and uncheck and re-check phone audio, it seems to connect most of the time.
4. If I unpair and delete the phone from the car's memory, and do it all over, it works for the first time, same as above.
Phone is running stock HTC stuff, no root etc.
Car is Subaru Impreza 2011.
My HTC Aria used to connect both phone and media automatically each time flawlessly. (Running CM6 and 7, <never got a chance to try with stock )
Any pointers would be great!
Thanks

Might be a car problem. My last 2010 VW GTI had a finicky bluetooth. You could stream audio and take calls, but if you walk out of range of the BT while the car is on and walk back in range it won't connect until I reset the head unit. However in my 2011 BMW, I can walk out of range and it instantly connects to my phone when I'm back in range. Connects every time without a flaw (even though I did have some occasionally difficulty with my iphone and bluetooth in the BMW)

I have exactly the same problem as described by the op. Not sure what to do but I don't talk much on the phone so it's not that big of a problem for me. If it was the other way around it would be much bigger problem. Anyone has suggestions? I woud like to make it work as it should.

Whafrodamus said:
Might be a car problem. My last 2010 VW GTI had a finicky bluetooth. You could stream audio and take calls, but if you walk out of range of the BT while the car is on and walk back in range it won't connect until I reset the head unit. However in my 2011 BMW, I can walk out of range and it instantly connects to my phone when I'm back in range. Connects every time without a flaw (even though I did have some occasionally difficulty with my iphone and bluetooth in the BMW)
Click to expand...
Click to collapse
I'd have thought that but the aria worked fine!!
dacho said:
I have exactly the same problem as described by the op. Not sure what to do but I don't talk much on the phone so it's not that big of a problem for me. If it was the other way around it would be much bigger problem. Anyone has suggestions? I woud like to make it work as it should.
Click to expand...
Click to collapse
For you also, does nothing connect by itself? I'd be somewhat happy if atleast media connected automatically
Once we have a good permanent root solution I'll play with tasker to see if I can create a workaround...but this sucks!

Raider
I have a Rogers Raider and it works really well with my Kia Sorento. I think it is the vehicle or both. Both meaning compatibility issue. I had a Samsung Vibrant (i-9000) and it worked but sometimes it doesn't connect and always seems to upload my address book which takes a long time. With this Raider, it works like a charm. The Raider works before and after root.
Did you check your vehicle Bluetooth vehicle compatibility chart? They might have one.

sohoxda said:
I have a Rogers Raider and it works really well with my Kia Sorento. I think it is the vehicle or both. Both meaning compatibility issue. I had a Samsung Vibrant (i-9000) and it worked but sometimes it doesn't connect and always seems to upload my address book which takes a long time. With this Raider, it works like a charm. The Raider works before and after root.
Did you check your vehicle Bluetooth vehicle compatibility chart? They might have one.
Click to expand...
Click to collapse
I have a 2010 Hyundai Sante Fe (similar to the Sorento). After initially pairing my Vivid to the car's bluetooth, the two have always connected, reagrdless of whether I turn on BT before or after I get in the car. I also had no problem with the old HTC HD2 (WM6x) and the Santa Fe's bluetooth.
Have you tried un-pairing the phone and car and re-pairing?

Everything works fine with mine too. I have a Toyota with BlueLogic. I used to have this problem with my old device, Motorola Atrix, didn't connect most of the times. I checked many forums and I found out it is a Gingerbread problem, with Froyo everything worked flawlessly.
Sent from my HTC Vivid via Tapatalk

connectivity issues
I have a Subaru impreza 2011 which has Bluetooth in it, and I just bought an htc rezound. I run all my music via Bluetooth so this is a pressing issue... It pairs and connects just fine the first time but I have to erase the Bluetooth memory on my phone and my stereo and re pair everytime I get in my car. I used go have an iphone and it worked fine. I checked my phone with a Bluetooth headset and it acts just like its supposed to. Any suggestions?

dangeruponu said:
I have a Subaru impreza 2011 which has Bluetooth in it, and I just bought an htc rezound. I run all my music via Bluetooth so this is a pressing issue... It pairs and connects just fine the first time but I have to erase the Bluetooth memory on my phone and my stereo and re pair everytime I get in my car. I used go have an iphone and it worked fine. I checked my phone with a Bluetooth headset and it acts just like its supposed to. Any suggestions?
Click to expand...
Click to collapse
Same symptopm..
My only hope is that the BT libs of CM9 will do some magic

What's CM9?

Mine seems to automatically connect just fine. However from time to time, very few times, the sound won't work right off the bat. If I press the volume rocket it will play a sound. Sometimes I have to press it twice then the sound will come through the speakers and music will play just fine. It's strange and quirky, but eh. Lol so if you're suck without sound, try to adjust your ringer volume to stimulate the sounds before repairing. See if that works.

dangeruponu said:
What's CM9?
Click to expand...
Click to collapse
Cyanogenmod 9, based on AOSP 4, Ice Cream Sandwich. Www.Cyanogenmod.com.
Sent from my HTC PH39100 using xda premium

Bluetooth Connectivity Issues

I got my Nexus 7 last week and have not been able to put it down. Recently I got a bluetooth keyboard to go along with it and it brought some major bluetooth connectivity issues to my attention. Has anyone else had any issues with bluetooth accessories on the Nexus 7?
The problems I have been dealing with:
When connecting to a bluetooth device whatever screen I am on on my tablet refreshes (ie: home screen redrawn, chrome all tabs refresh)
Bluetooth connectivity drops momentarily (tethering or connected to bluetooth keyboard)
I'm trying to figure out if it's the unshielded speakers on my office desk or if it is an actual problem with the bluetooth module on my Nexus 7.

Quick update, I've been able to recreate the issue with the screen refreshing/redrawing when a paired device is connected and disconnected. It seems that anytime you connect or disconnect a bluetooth device it refreshes whatever screen you are on (if it's a browser window where you've filled in a bunch of text on a forum you will lose all of it because the browser tabs refresh as well).

While I have not tested this specific BT setup I can confirm that the BT performance on this device is horrible. Specifically with BT headsets when used with any VoIP app or even Google talk.
I hope it is just a software issue and will be fixed with an update.
Sent from my Nexus 7 using xda premium

Here's a quick video of what's going on with mine. I have another Nexus 7 arriving today so I can test to see if it's just an issue with the one I currently have.
http://www.youtube.com/watch?v=T4vLOxr-qxE

I have been unable to play an .avi movie with a bluetooth headset, it freezes after a few seconds. It plays no problem without it. I have also had issues with the tablet becoming very slow when tethering to bluetooth, at least for number of seconds (> 30), presumably when it got internet and started syncing...but no slowdown on the wifi, so it wasn't the syncing with the issue, but the bluetooth part of the communication, I believe. Anyone else been able to play movies with a bluetooth headset or speakers?

I have had no trouble at all with Bluetooth. My Samsung Hs3000 works great with music,movies and any internet or sys sounds. It Also has a very good range of at least 75ft or more in the open and covers my downstairs when inside.

I have been able to pair 2 headsets. 1st had no function at all, ext. mic did not work and no sound- using groove ip or playing music. 2nd was a stereo bluetooth set with ext. mic. No transmission with groove ip. However, with this one I was able to listen to music.
Also paired with 2 phones. One with JB-( Gnex )and one (Note)with ICS. No data transmission to tablet with either one over bluetooth.

same issue - getting sound on voice
I've bluetooth paired with phone and media audio connected.
I get the sound but not mic.
This is with nexus 7 4.1.1 using novero rockaway headset...it works fine with the ipad.
any ideas? I'm stuck.

[Q] Issues with Moto X and two Bluetooth devices

I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!

fury683 said:
I searched this forum and didn’t see any posts related to this issue directly, please direct me to any existing threads if I may have missed them. Sorry for the length of post, but I wanted to be as detailed as possible to fully explain the issue.
I am having some issues with the Bluetooth connections that I use in my car. I had this setup working previously on my Droid Razr Maxx with no issues, and was really hoping it would carry over to my Moto X.
I use Tasker in my car and have several profiles setup based on my Bluetooth connection state. When I enter my car, I connect to my General Motors Bluetooth for hands free calling. This connection works without issue. I also have a small USB powered Bluetooth audio receiver that converts the Bluetooth stream to a 3.5mm cable and goes into the radio deck for audio. It was a pretty cheap dongle that I got on eBay. It doesn’t have a brand name on it, but it comes up in my phone as “dmzmusic”. I’ve never had any major issues with it before, other than on occasion it fails to turn on when the car starts, but shutting the car off and turning it back on again works fine.
Last week I had my phone in a basically stock 4.4 state. Not rooted, nothing changed, etc. When I would get in the car, General Motors Bluetooth connected just fine. I did not happen to take any phone calls last week, so I’m not sure about how well that was working. I’ll get to this in a minute. My other connection for dmzmusic seemed to connect and then very quickly disconnect. This was evidenced by my Tasker profile launching Pandora, which it is supposed to do when it connects to dmzmusic. However, Pandora immediately exited again, and when I went to the Bluetooth settings, only General Motors was connected. If I tapped on dmzmusic in the list of paired devices, it connected and worked fine.
Over the weekend I rooted my Moto X with SlapMyMoto, which was quite a long process, but in the end, I was rooted and all was well. This morning, I got in my car and re-paired both devices mentioned above. When the Tasker profile fired for dmzmusic, I watched it launch Pandora, and then close it within a few seconds (there is an exit task to kill Pandora). It did this cycle three times, and then apparently stopped trying. As with before, I tapped on the connection and it worked fine. It launched Pandora, music played my whole way to work, and Pandora was killed when I arrived at work.
Now, back to the General Motors issue. Today when I was driving to work in the lovely Minnesota weather, my boss called to see where I was. My music paused, but my radio deck did not show an incoming call on the screen. I pressed the hands-free answer button, but it didn’t work. I picked up the phone and swiped right to answer, but it didn’t come through on Bluetooth. So I started talking on the handset, and after about 30 seconds, it connected to the radio and hands-free worked. When I was done with the call Pandora and music resumed, as it should.
So my question is, has anyone else had any issues with hands free Bluetooth, and/or any issues when using a hands-free device AND a media only device? In the Bluetooth settings, my General Motors connection only has the option for phone. The dmzmusic device has phone and media, but I have unchecked phone so it’s set to media only, if that makes any difference.
I know it’s a somewhat unique situation, but it’s really annoying that it doesn’t work. Tonight I am going to test having a few seconds delay on the Pandora task to see if that helps the repeat cycle that it did this morning.
Thanks!
Click to expand...
Click to collapse
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.

Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?

totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Thanks. I wasn't able to test it on 4.2.2 (it took right away OTA out of the box) with my Moto X, but it was working fine on my Droid Razr Maxx on 4.1.2 Jelly Bean before I got the Moto X.
I will have to try and see how it works with just the A2DP device without the handsfree. I rarely ever talk on the phone, and with the Touchless Controls I could call people and just pick up the phone. Or turn the phone portion back on for the A2DP device so the sound would come through my speakers but I'd still have to use the mic on my phone...
Still annoying. Thanks again for the reply.

gtg465x said:
Bluetooth working fine on 4.4 with my Hyundai Elantra. Phone and A2DP. Maybe try repairing?
Click to expand...
Click to collapse
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,

I have a Dension BT gateway for my car that provides BT audio and hands free. My phone connects automatically as long is bluetooth is turned on. I also connect to a BT OBD2 adapter sometimes, and I tried it today, and I kept playing Pandora via BT and also connected to the OBD2 adapter and had data going from both of them.

fury683 said:
Both pair automatically together when you enter the car?
I can get them to coexist, but I have to manually add the A2DP device. The car radio (General Motors) connects fine, but the A2DP cycles and then gives up, it seems.
I will try pairing them in a different order, and temporarily disabling or adding a wait clause to my Tasker profile to see if it works without that.
Thanks,
Click to expand...
Click to collapse
Yeah, but they aren't a separate connection I don't think. Pretty sure the one connection handles both.

Seems to be an issue with the A2DP device specifically. I unpaired my car and the dmzmusic device and repaired them both, same result. I added just the dmzmusic, and got the same thing.
I changed my Tasker profile to just flash a toast message to show it connecting and disconnecting instead of firing Pandora to see if that mattered and it didn't. I did not try disabling the Tasker actions entirely to see if that worked.
I have a pair of Bluetooth headphones at home that I may try as well to see if it will connect to those. They fire the same task as the dmzmusic does to launch Pandora when they connect, and kill it when they disconnect.
Hoping this gets fixed, because it's VERY annoying.
Is it possible to submit this to Google/Moto as a bug if it is a larger problem with all A2DP devices?

But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.

gtg465x said:
But it's not a problem with all A2DP devices. Works fine with both my 2013 Hyundai Elantra and my Jaybird Freedom buds.
Click to expand...
Click to collapse
Thanks. I will try it with the Philips bluetooth headphones as well. The device in my car is pretty cheap. I don't know what version of Bluetooth it has, but it was only about $5. Anyone know of a similar device that can receive a Bluetooth audio signal and convert it to 3.5mm, and is powered by USB?

totempole said:
Yup... My Dev GSM Moto X on 4.2.2 connected just fine to my Mazda for both Phone and A2DP everytime I entered or exited the car. With 4.4, I'd have to manually go into Bluetooth and have the phone connect to the car. Very annoying... Haven't had that happen since ICS days.. Might have to downgrade to 4.2.2 again just to make this go away.
Click to expand...
Click to collapse
Well I sort of solved this. There's an app in the Play Store called Bluetooth Auto Connect. This can connect to bluetooth devices with a set of conditions and states, and works as a plug-in to Tasker. I told it to connect to dmzmusic upon connection to any other bluetooth device (in this case, my General Motors hands free). Worked perfectly. Thought you'd like to try it out for your dual device setup.
However, I also have a new issue. It seems the reason my phone call wasn't on bluetooth at first was due to some sort of connection issue with the General Motors unit. While driving home tonight, every few minutes my car radio said Connected. And every time I turned the car screen on to thumb up a song on Pandora, it flashed Connected to a trusted device. Which implied to me that it was disconnecting periodically. No idea why it would do this. Didn't see any setting for it in bluetooth, and battery saver isn't on.
Anyone seen something like this? Will try tomorrow without the trusted device settings to see if that matters....

I noticed a similar auto-connect issue with mine, when I was attempting to troubleshoot the stuttering A2DP issues I'm having. If I have the HFP and A2DP profiles both enabled, they both connect right up when the ignition is on. If I have the HFP profile disabled, and only A2DP enabled, it doesn't connect right away and I usually have to manually force it. Very strange. This whole BT situation on this phone has been a pretty big disappointment for me, since I had everything working great with my GNex (running 4.3) and now it's like I've lost the heart of my car audio system.
I bought the Kinovo BT dongle for my wife for Christmas, so it will be interesting to see how that works with her Moto X. I'm pretty excited about trying out the AptX encoding for lossless audio, but I doubt she will even notice the difference.

Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk

totempole said:
Just to give you an update.. I downgraded to 4.2.2 and it connects to my Mazda automatically just fine.. Upgraded to 4.4 and the problem returns.. No apps.. Stock + root. Keep in mind that the problem lies only with the auto connect aspect of it.. Streaming/calls work fine but only after manually connecting.
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Did you look at the auto connect app? It worked fine for me. My Bluetooth stopped working for a day or two because I froze a process without realizing what it was so BT wouldn't turn on at all. I think I have to remove and repair both of my devices to get the same setup I had on my Razr Maxx on 4.1.2,
The connecting/disconnection and/or 1-2 minute lag from my General Motors hands-free connection was annoying too. Have to see if that persists. I tried making the A2DP device the trusted one to see if that changes anything.
Really hoping this is something that Moto can/does fix, especially through a Play Store push like they've done with Active Display and the camera app.

not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.

640k said:
not that this is much help for the OP, but my subaru auto connects voice (calls) automagically each time. it also auto-pairs/connects with my TuneLink audio (BT receiver for audio output over headphone/FM).
in the bluetooth settings, the settings button next to your device brings up the paired bt device profile. check to see if all of your devices are registered correctly. for example, my subaru says, "phone audio" and my tunelink says, "media audio".
to help complicate/annoy/support above, i also have a soundbar and BT house phone (cordless). both devices behave the same way my car/tunelink do.
Click to expand...
Click to collapse
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..

fury683 said:
Thanks. I do have the boxes ticked in the device settings for which stream to use. The General Motors connection only has Phone Audio (and it's checked) and the dmzmusic A2DP device lists Phone Audio and Media Audio, only Media is checked.
Did you have these devices setup on 4.2.2 before taking the upgrade to 4.3? Did you wipe in the process? Wondering if that's why @totempole had the issue if he is rooted, he probably wiped the device in the process SBFing back to 4.2.2. If you aren't rooted and didn't wipe between 4.2.2 and 4.4, that could explain why it works OK for you and not us..
Click to expand...
Click to collapse
not rooted/haven't wiped.

640k said:
not rooted/haven't wiped.
Click to expand...
Click to collapse
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?

fury683 said:
Must be something with setting it up AFTER taking the update to 4.4 Kit Kat. Wonder if @totempole tried setting thiers up after going back to 4.2 and before taking the upgrade for the root process with SlapMyMoto?
Click to expand...
Click to collapse
could be completely device specific too. if your vehicle is BT v2.x or whatever. my tunelink specifically has problems with data/audio stream with the X that my X doesn't have problems with on other devices. could be software/hardware incompatibility issues.
FWIW, my vtech BT phone @ home would NEVER pair with other devices. i would always have to manually pair.

I just emailed Moto about this, because I'm having bugs too. I think that you're on to something, 640k. My Pioneer headunit (FH-P800BT) has BT 2.0, and while HSP connects fine, A2DP only works on the first pair, and after disconnecting once and reconnecting, it won't ever connect A2DP. I have to completely unpair the phone and re-pair it to get both A2DP and HSP working. My phone also gets stuck on "Connecting..." under BT whenever it's having issues connecting with A2DP. Here's the email I sent off to Moto"
I've noticed an issue with my new Moto X that I never had with my Samsung Galaxy Nexus. The phone itself performs way better than my older phone, but I've had a specific bluetooth problem. I have a Pioneer headunit that supports A2DP as well as HSP (music playback and headset functionality) and with my Galaxy Nexus, it worked great, I paired my phone up with the headunit, and both A2DP and HSP would pair at the same time, and work perfectly. With my Moto X, when I first pair the phone to the headunit, it pairs both profiles, but after I've disconnected (turned car off or turned bluetooth off) and come back, it only pairs HSP, and when I try to pair A2DP, my phone gets stuck on "Connecting..." under bluetooth to the headunit, and never will connect to A2DP unless I unpair and re-pair the entire phone. I've tried resetting my headunit and phone and still the same problem exists. Looks like other people are having issues with bluetooth too, as per this article on a popular Android forum > http://forum.xda-developers.com/showthread.php?t=2562186 < I'd like you all to check this out. Seems it's just on 4.4, and wasn't present on 4.2.2 (I never checked myself on 4.2.2, as I immediately upgraded to 4.4 when I got my phone. This doesn't seem to be a hardware problem, but more of a software problem. Please check into this, and don't just read this and act like it's only a problem a handful of people are having. I'd like to have this fixed, and while it's not a deal-breaker for me to use the phone, it does make me a bit frustrated. Thanks in advance!
Click to expand...
Click to collapse

[Q] Anyone have issues with Bluetooth A2DP?

I got my Note 4 yesterday and was trying to connect my car radio (Jvc Kw-V50BT). The phone connected, but when trying to connect the media part of the phone it just doesn't want to connect. I had a LG G2 prior to this phone and it worked fine. I checked JVC and it should work with Bluetooth 2.0 and up. This is baffling my mind right now. I might have to factory reset my phone and try it that way. Any help would be appreciated.

No problems here I use my Ford touch and everything is fine

HtcOnekid said:
No problems here I use my Ford touch and everything is fine
Click to expand...
Click to collapse
well I might have to factory reset it then.

redstar kachina said:
well I might have to factory reset it then.
Click to expand...
Click to collapse
If it still doesn't work...try another BT source.

Works better with my Ford Touch than any phone previously.
---------- Post added at 10:55 AM ---------- Previous post was at 10:53 AM ----------
Try reseting your radio... not sure how you do that with your model. Make sure you delete the old pairing.

bt 4.0, which most newer phones have, is very touchy about what it works properly with; I have a bad time trying to stay connected to my vivosmart garmin band, but pairing to my car and plantronics headset works 100% of the time.
my wife has a G3, and has the same issues; some things work 100% of the time, and some others only work occasionally

A2DP Issues
I just got my Note 4 yesterday, and am definitely experiencing some (admittedly minor) issues with A2DP in my Honda CR-V EXL 2012.
When playing music over Bluetooth, I experience the infamous "Galaxy S5 intermittent half-second skip". Also, I have noticed that when playing an album or playlist, if the screen on the phone is off the currently playing song information will not update.
For example:
I am listening to "Gimme More" by Britney Spears on the album Blackout.
"Gimme More" ends, and the next track "Piece of Me" comes on.
The car screen will continue to show "Gimme More' unless I use the forward or back buttons from my steering wheel or dashboard to manually change songs.
This causes the screen to update to "Piece of Me"... albeit with a brief delay.
Very odd...

SiNJiN76 said:
If it still doesn't work...try another BT source.
Click to expand...
Click to collapse
I finally got it too work, but I had to get an app to help me out. I think it was called Bluetooth Manager or something. I forced it to accept the media and got it working. I was getting frustrated when even a factor reset didn't help.

Yes, I have the stuttering too on my Note 4. What can I do about it?

Note 4 note; note, Bluetooth.
redstar kachina said:
I got my Note 4 yesterday and was trying to connect my car radio (Jvc Kw-V50BT). The phone connected, but when trying to connect the media part of the phone it just doesn't want to connect. I had a LG G2 prior to this phone and it worked fine. I checked JVC and it should work with Bluetooth 2.0 and up. This is baffling my mind right now. I might have to factory reset my phone and try it that way. Any help would be appreciated.
Click to expand...
Click to collapse
This may not help but.. Got my Note 4 four days ago; had the Note 3. 3 Had 0 problems with Bluetooth; 30 ft. through walls, drops rare, auto connected to my car while I was in the house. Note 4 range 15 feet,, constant drops and fails to connect. Hoping to get another 3 or 4 from T-mobile but that has not happened yet. I'm good carrying both. The 4 makes calls (although the speaker is a downgrade. The 3 connects to all my stuff. just like the old days at work. :fingers-crossed:

This is what I'm using. No issues.

It's not super new. Just a decent deck. But, the rule is the newer the better with flagship phones:

Not sure if this is related or not - I have an open thread about blue tooth streaming issues with my car...
What I have found so far -
My car (2012 Subaru STi) has two methods to pair a blue tooth device... entering the setup through the steering wheel is the only way to save a device for auto connect and play, entering the setup through the head unit lets you save and select a phone to pair, but you must select pair each time you get into the car. If you do option #2, I have the call audio and media boxes always unchecked. - see if your car has a different method for primary user/secondary user blue tooth set up
and secondly, my main issue was that while listening to spotify my radio head unit would say BT-Audio Paused out of nowhere, when in fact, the spotify track still shows playing and the song is progressing.
after lots of troubleshooting I think this may be an issue to spotify itself and not my phone (I am now testing Pandora/other streaming media to see if they do the same interment freeze/odd stuff)

I've also been having problems with Bluetooth devices connected to my Note 4. Previously, I had been using an iPhone 6 and I didn't have any issues with these devices. Now, I'm experiencing connection problems with my Jawbone UP24, my Plantronics headset, or my Jaybird stereo earbuds, and other devices. Once I reboot my Note 4, the BT connection is usually back. But, sometimes I have problems even after I've rebooted the Note 4. If I power cycle my BT peripheral, I'm usually OK as well.
So - my question is: could it be possible that some of my Bluetooth peripherals (like my Jawbone UP24) may be causing some type of interference? Or, do I have faulty hardware?

Older Bluetooth Devices always seem to be hit or miss on the newer Samsung devices that have been coming out. May be its age being the factor, lol. :silly:

[Q] Bluetooth Connection Issue (Redux)

Hey All,
I've done a quick and dirty search for this problem, but I haven't found anything that's exactly the same.
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
I have done the unpair/re-pair thing a couple of times, but nothing changes.
I had an HTC phone before this, and it'd reconnect automagically to my cars BT server, so I suspect it's nothing to do with the car's BT radio. I really miss that...
Thanks for any suggestions anyone might have in how to remedy this. Fwiw, I'm willing to go through a diagnostic procedure if someone would clue me in to just how to do that.
cheers,
john

I've had issues with the bluetooth and pairing. When I was on 4.2.2 (I think..) it wouldn't connect automatically at all, and I used an app to connect for me. I have a Chevrolet Cobalt and it wouldn't connect to my built in bluetooth for calls or a small bluetooth dongle that I use for playing music through the AUX input on the stock radio.
https://play.google.com/store/apps/details?id=org.myklos.btautoconnect&hl=en
Once I was on 4.4.2 it seemed to work much better. I have no real issues now on 4.4.4. The only time I notice it not really working right is when I try to connect to the bluetooth speaker in our bathroom at home. If I turn the speaker on, it almost always connects to my girlfriends phone nearly instantly, even though I open the bluetooth menu and tap the paired device to manually initiate right when I turn on the speaker. It usually takes me a few tries to get mine to connect before hers, or I ask her to shut her bluetooth off for a moment while I connect. She uses the speaker every day because she leaves for work after me, so it only happens to me 1-2 times per month on the off chance that I want to listen to music or a baseball game in the shower, so it never really bothered me much.
I think the bluetooth radio in this phone could be better.. I never had any similar issues with my Droid X or Moto Razr Maxx so I'm not sure what the deal is...
Edit: forgot to mention I also have an XT1060, but not dev edition. My bootloader is unlocked and I am rooted, but using the official 4.4.4 VZW rom with Xposed.

I have never had any issues pairing Bluetooth - on either my car or moto 360 watch (even simultaneously).
However, I have noticed that the Bluetooth connects much quicker on custom ROMs when compared to stock.
I think tour connection issue may be a setting or rogue app related.
Sent from my Moto X using XDA Free mobile app

Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john

jrredho said:
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
Click to expand...
Click to collapse
You may need to delete the profile for the Bluetooth pairing in your car. Could be a conflict there.
Otherwise, try looking at your Bluetooth settings on the phone.
Sent from my Moto X using XDA Free mobile app

jrredho said:
...
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
Click to expand...
Click to collapse
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.

KidJoe said:
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
Click to expand...
Click to collapse
Guys, thanks for staying with me on this. One thing I've definitely learned is that the bluetooth thing is something I'm pretty ignorant on. I can see that I'm going to have to study it a bit before too long. Gad, that HTC spoiled me rotten---at least in that way.
I haven't tried the phone with any other BT devices. This is mostly because I don't own but two, the car and a travel speaker, and I haven't had the speaker out of its case since I scored the phone six or eight weeks ago. Also, I did some housecleaning, so I have only a small fraction, maybe 20%, of the same apps on the MotoX that I had on the HTC. I have no apps on the MotoX that I didn't have on the latter.
As for some of the car-related suggestions, it's a 2015 Subaru Forester Premium 2.5i, which is really only level up from the base model of that line. I can't find that there is a bluetooth profile setting in the car that I can change; I think that it's too basic. The relevant user manual simply states the following:
Media format
Bluetooth audio devices cannot be
connected if they are not compatible with
the following Bluetooth® profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
I don't even know what either of those mean!
Anyway, what I did do is go to the phone settings, and uncheck the Media box that shows up once the car's BT server is detected. Then I try to connect with the Phone box checked. It'll still fail to connect several times, but (a) it doesn't take as long to fail to connect, (b) it doesn't take as many tries (it seems) to make the connection, and (c) when it fails, it fails totally, so I don't have to disconnect from 'Media-only Connected (No Phone)' connection. That makes it easier I suppose. Then once the connection is established, it's a simple matter to go back to settings, and check the Media box. That add-on connection happens pretty quickly, but the process is still a little overwrought, imo.
Of course, KidJoe, up until you mentioned a Headset Profile, I didn't know one existed. But when I try to play music on my phone using PowerAmp, well, the app doesn't hook up to the BT anyway. That's a key difference between the HTC and the MotoX. In PowerAmp, I have "Play over Bluetooth on Detection" selected. The headset isn't being detected at all. So maybe that goes some distance to explaining what I'm encountering.
Again thanks to both of guys for hanging in there with me! I'll keep trudging "onward through the fog," as it were...
cheers,
john

A2DP and AVRC are used for Bluetooth Stereo audio streaming (like playing Pandora on your phone via your car stereo). Not phone calls.
For phone calls, usually a Headset or Handsfree profiles are used, and sometimes BT Phone Book Access (so you can see your phone's contact names/numbers on the car's screen).
I've run into compatibility issues between some phones and some Headset/Handfree devices (mostly cars, but a few bluetooth headsets too). Often times when this happens, you're stuck. Each side will blame the other (i.e. Moto will blame the Subaru car stereo, and Subaru will blame the phone).
I have had issues re-connecting to my car (a 2011 Saab 9-4x with Bose/Nav), IF I had my Moto S11 Flex HD headset connected to my Moto X before I got in the car (even if the S11 was powered off/disconnected from the X before I started the car). Usually toggling the X's bluetooth off/on, and sometimes worst case rebooting the phone, has always fixed it.. Another time I had troubles connecting to my Saab's car kit was when my wife was using her phone to stream audio. The next time I got in the car, I had to manually connect my phone. The car always tries to connect to the the last phone used, so it was looking for my wifes and it took a while before it timed out. When it did time out, it didn't look for mine.
Since you have a 2015 Subaru, I would consider visiting your car dealer, ask them to help with pairing the phone properly, and making sure its working right. See what they have to say.

My bluetooth in my car stopped pairing the other day, and it turns out it was an app that updated and requested permissions related to bluetooth. I didn't notice them because it's an app I trust so I accepted the new permissions without really looking at it.
I used App Settings (Xposed module) to disable the permissions and my bluetooth works fine again.
I could still pair with things if I went to the bluetooth paired device list and manually tapped on the device I wanted to connect with, but it would not pair automatically (like when I got in my car). Once I disabled that permission, it started working again without issue.
May be worth a look through your installed apps to see if anything has access to bluetooth and may be interfering.

Hey All,
Thanks again for the continued help!
It's true, I didn't do any research on app interference before I posted this thread topic, but since a couple of you have brought it up, I decided to do a little research. I installed a permissions app, and took a look at the permissions that allows an app to automatically seek out, and pair with, Bluetooth servers. I have to admit, I got some surprises there. (Who would've thought that Beautiful Widgets needed that permission; it is now gone.)
Anyway, most of the remaining apps are either system/Moto-related, or ones I would really like to keep. I'll report back on what I learn. If there are other permissions that I need to reference besides the two pairing-connecting to Bluetooth ones please let me know...
cheers,
john