Database Develop

[KERNEL]lightning kernel cm11

Lightning kernel
this kernel is made for cyanogenmod 11 roms and i take no responsibility if you brick,destroy your device due to this kernel
features
sound control 3.2
gpu overclock to 627mhz
intelli thermal
cpu overclock upto 1836mhz(disable mpdecision)
compiled with linaro 4.9.1
added intelliactive,intellidemand,preservative,hyper,wheatley,lionheart governors
row,fiops,tripndroid io schedulers
undervolting
sweep to wake and double tap to wake
auto mpdecision (turn off stock qcom mpdecession)
sound stuttering fixed(zzz sound while hearing music)
Motorola MSM memcpy enhancements
cpu unallingnment access
kernel mode neon
exfat support
gpu voltage control
more to come
source code https://github.com/nikhil18/android_kernel_sony_apq8064
installation instructions
flash the zip in recovery
Setting custom GPU Voltages via sysfs
NB:
- Safe lock is present on MIN/MAX values:
Quote:
#define GPU_MIN_VDD 900000
#define GPU_MAX_VDD 1200000
The default GPU voltages are:
Quote:
+ [VDD_DIG_NONE] = 0,
+ [VDD_DIG_LOW] = 975000,
+ [VDD_DIG_NOMINAL] = 1075000,
+ [VDD_DIG_HIGH] = 1175000
Verify the actual settings:
Quote:
cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
975000
1075000
1175000
Adjust to desired values and verify:
Quote:
echo "930000 1000000 1100000" > /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
benchmark
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
credits
doomlord for kernel building instructions
jeroenqui for meow kernel
cyanogenmod for kernel source
Tommy-Geenexus
faux123 - For almost all kernel features

Changelog
version 2 - wifi fixed but removed intelli-plug and overclocking
version 3 - overclocking upto 1836mhz and gpu overclocking upto 533mhz(if overclocking does not work copy sysmon file to system/etc folder)
version 4 - added many governors,undervolting,sweep to wake and double tap to wake, fiops and row io schedulers and fast charge
version 5 - fixed gpu overclock steps,added gpu overclock upto 627mhz,xz kernel compression(fast boot),mpdecission by showp (turn off stock qcom mpdecession)
version 6- added gpu governors simple performance and ondemand,many optimizations
version 7 - added new gpu drivers,updated prima wlan drivers,O3 compiling,gamma controls
version 8 - remade from scratch ,added new governors hyper,wheatley,lionheart vr,trpndroid,zen io schedulars , simple gpu governor , removed msm mp decision and added auto msm mp decision and a lot of optimizations
version 9 - removed extra frequencies in voltage table,Motorola MSM memcpy enhancements and cpu unallingnment access for better performance,removed 627mhz gpu freq,kernel mode neon,fast charge.
version 10 - added exfat support,fixed cd rom emulation,gpu voltage,updated intelliactive and hyper governor.
version 12 - https://drive.google.com/file/d/0B9d32m0t4sa0TmFfX2hGMUlLTDg/view?usp=sharing

Will test it
---------- Post added at 11:48 PM ---------- Previous post was at 11:22 PM ----------
WiFi isn't working for me, can't turn it on
...

WIFI isnot work

i just want my 2nd mic to work in custom rom, does this help?

Test it and give feedback, if it doesn't help, flash the normal cm kernel or boot.img
...

delete

Sorry, is there any special instructions for installing this kernel, or just flashing it? I want give it a try.

guys is doubletap2wake and sweep2wake working for anyone

nikhil18 said:
guys is doubletap2wake and sweep2wake working for anyone
Click to expand...
Click to collapse
Not for me. I tried your kernel with CM11 nightly last night and sadly, d2wake is not working

On Carbon(CM11 based) doubletap2wake doesn't works with default kernel and still not working with Lightning kernel.
But anyway, thanks for your work @nikhil18 :good:

Thanks @nikhil18! This solved my sound stuttering bug
Could you explain to me what the intellidemand etc. intelli stuff governors are for? I never understood what they were for :$ All I know is that ondemand and interactive is a good governor and is not a battery hog unlike Performance.
EDIT [ADD ON]: I would like to thank you for this Kernel, my ROM is smoother than before and more consistent in terms of performance, even though it already is, I can feel that it is, and its not placebo.. Keep it up. Looks like Im gonna have to set up my 2nd bank account with paypal and start donating for awesome devs like you haha

it doesn't work with mokee rom.

kostazol said:
it doesn't work with mokee rom.
Click to expand...
Click to collapse
then the sources are different sorry cant do anything about it

nikhil18 said:
then the sources are different sorry cant do anything about it
Click to expand...
Click to collapse
it work but with errors, after starting i have error systemUI. Can you repair it?
P.s. I install your kernel without wipe.

kostazol said:
it work but with errors, after starting i have error systemUI. Can you repair it?
P.s. I install your kernel without wipe.
Click to expand...
Click to collapse
bro mooke rom uses a different sourcecode and its not based on cm11 and i need to make a kernel from scratch to support the rom

del

kostazol said:
Thank you for answer, I thought that mokee is cm11 based rom. I will be very happy if you make your kernel for mokee, but i understand that it is difficult and it needs your time.
Click to expand...
Click to collapse
delete

Kernel works great
Kernel has been working smoothly for me on Carbon Rom. I don't have Bluetooth audio stuttering anymore but I do still get sound stuttering (bluetooth as well as through phone speaker) in Plants vs Zombies 2. This stuttering also occurred in the stock kernel so it might be an app optimisation problem. I've tried other governors and it doesn't seem to make a difference.
Thanks for the kernel mate.

About v7 on my ZR (CM11) :
- Impossible to undervolt (no tab on SetCPU)
- Very instable when overclocking. Phone freeze and reboot just after set max frequency.

[EOL][KERNEL][STABLE][TW][6.0.1][CPK2][03.01.17][SM-T80X] IronStock-Kernel V3.2

IronStock-Kernel for SM-T800/T805 models
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports Touchwiz based on 6.0.1
The aim of this kernel is to be as stock as possible with improved performance and up to date linux version. I included this builds in all IronRom versions but most of you probably want to use it as standalone kernel. So here you go with the new kernel
By the way if you want to visit my rom: IronRom.
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
If you want to take my work and need it somewhere, or do other things with it, ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
Features of this Kernel:
- Build with latest Toolchain 5.3
- Build with CPK2 kernel source!
- Latest Linux version 3.4.113, is always up to date
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative
- Built with latest ramdisk sources from samsung (CPK2)
- I/O schedulers: CFQ (Default), No-op, Deadline
- Critical TCP bug fixed
- Allow ADB-Insecure
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- SeLinux is set to permissive
- UKSM build in
- Init.d support
- Wakelock fixed (google problem)
- All samsung related configs disabled (as knox, tima, restrict rooting)
Download:
V3.2 on AndroidFilehost
All releases on AndroidFilehost
Bugs/Problems:
- None
Instructions:
1. Download kernel
2. Boot into recovery mode
3. Flash kernel
4. Flash any other file which affects ramdisk (such as supersu, xposed, magisk etc.)
5. Reboot
If you wanna join the beta tester group, download yourself telegram and click on the chat link: Telegram Group
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :good:
PayPal​
Credits/Thanks:
- Samsung for sources
- the great linus for his amazing kernel source
- dorimanx
- AndreiLux
- halaskz
- neobuddy83
XDA:DevDB Information
IronStock for chagallxx, Kernel for the Samsung Galaxy Tab S
Contributors
Tkkg1994
Source Code: https://github.com/Tkkg1994/IronKernel/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V3.2
Stable Release Date: 2017-01-03
Created 2017-01-03
Last Updated 2017-07-14

Reserved

Reserved

Is this kernel integrated in your rom 3.2?

onairda said:
Is this kernel integrated in your rom 3.2?
Click to expand...
Click to collapse
Yes, is integrated.

Testing
Thanks for the kernel!! I'm testing it now and it feels good so far
m.

report
After rebooting the device the subscription to the Wi-Fi network get lost, means I have to reenter the password after every reboot. I don't know if it's the kernel like it is or because I changed the TCP congestion fromm cubic to highspeed. I don't have any experience with this feature. I could change back to cubic and check if the network subscription sticks... .
m.

meduza2 said:
After rebooting the device the subscription to the Wi-Fi network get lost, means I have to reenter the password after every reboot. I don't know if it's the kernel like it is or because I changed the TCP congestion fromm cubic to highspeed. I don't have any experience with this feature. I could change back to cubic and check if the network subscription sticks... .
m.
Click to expand...
Click to collapse
Change in your build.prop secure storage from true to false and it will work again
Sent from my SuperMan powered SM-G930F

Indeed, changed it this way: “ ro.securestorage.support=false “ and it sticks Thanks a lot!!
m.

freaksamael said:
Yes, is integrated.
Click to expand...
Click to collapse
Thanks for the answer

@Tkkg1994 ,
the tab with your kernel is running much smoother then with pure stock - thanks once more!
m.

Anyway to flash back to Stock Kernel?

XDA00000 said:
Anyway to flash back to Stock Kernel?
Click to expand...
Click to collapse
Would a boot.img backup in this case suffice? I haven't flashed the kernel yet but a boot image backup would contain the old kernel as well. The question is mostly if there are any other modifications that are being done.

XDA00000 said:
Anyway to flash back to Stock Kernel?
Click to expand...
Click to collapse
If you don't have the zip file, I would say, you could restore the boot and system partition from your backup, this should bring back the backuped kernel.
m.

Does your kernel support f2fs ?

Claros22 said:
Does your kernel support f2fs ?
Click to expand...
Click to collapse
.... would be nice but I didn't see it in OP ...
m.

Claros22 said:
Does your kernel support f2fs ?
Click to expand...
Click to collapse
I haven't written it to OP but it should at least /data and /cache (untested)
XDA00000 said:
Anyway to flash back to Stock Kernel?
Click to expand...
Click to collapse
Yeah just restore back boot.img backup, nothing else needed

Tkkg1994 said:
I haven't written it to OP but it should at least /data and /cache (untested)
Click to expand...
Click to collapse
Ok nice I will try it then. By the way it is better to use ext4 for other partitions than /data and /cache.

Claros22 said:
Ok nice I will try it then. By the way it is better to use ext4 for other partitions than /data and /cache.
Click to expand...
Click to collapse
All other partitions are simply not supported

Kernel works great so far. No issues and performance feels good.
What's the best way to switch between SELinux permissive and enforcing on this kernel should one want to experiment with that? Some solutions don't seem to like KNOX but it should be disabled on the kernel, too, right? I'm still struggling to get Magisk Hide working so I'm feeling experimentative.

[TW][N][G930/G935/F/FD/W8/S/K/L] PRIME-Kernel v1.3.2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
for S7 & S7 edge​
Moved thread to : LINK
Requirements for using the kernel
Model Variants: SM-G930S/K/L/F/FD/W8, SM-G935S/K/L/F/FD/W8
Tested Device: SM-G930S/K/L & SM-G935S/K
Installed OS: TouchWiz N 7.0, S8 Port ROM, Note7(fe) Port ROM
BASE: G935F - DQH8
Main Features
• Stock / S8 / Note FE firmware (boot) support in one kernel.
• Synapse support.
• SELinux Permissive.
• Linux 3.18 upstream. (Currently: 3.18.70)
• Compile with UBERTC 7.2.1 toolchain.
• F2FS support.
• Optimized for Exynos8890 using the Exynos-M1 flag for compile options.
• Gametuner-Mod: Game Booster Mode, Provides intelligent performance enhancement mode in conjunction with Samsung-Gametuner.
• Apply Fake KNOX.
• Apply chacha20 to random (entropy).
• Activate Exynos Swap.
- Hardware-based memory compressor installed on Axis AP.
• Linaro LSK-v3.18-Energy-Aware Scheduler (EAS) port.
- EAS simplifies power and performance management through scheduler-driven tuning to manage more efficiently.
- Linux-v3.18 already has EAS installed, but with the LSK-v3.18-EAS, the existing EAS has been further improved and the user can choose between tuning power efficiency and performance.
• Linaro v3.18/topic/OPPv2 branch merge.
• Improved storage performance and longevity by applying lazytime mount options.
- Similar to Dynamic Fsync, but operates at the file system level and has no risk of data loss.
• CPU/GPU UC & OC.
• Limit the maximum overclock range according to the device's ASV value (device yield) to prevent excessive overclocking.
• CPU/GPU/BUS voltage regulation.
• Ported GPU driver from Note-FE (r15p0) & Performance Tuning.
• Performance / balance / battery-separated DVFS user settings.
• Thunder Hotplug driver port.
• HMP tuning Interface.
• Detail charging circuit control allows faster charging.
• Added I/O Scheduler 'bfq, fifo, fiops, row, sio, maple, tripndroid, zen'.
• Enable Westwood tcp/ip congestion control (not default).
• LED FADE control.
• Qualcomm interactive (renamed cafactive) cpu governor porting @by arter97.
• Added battery-friendly impulse governor and more powerful ironactive (interactive in the Qualcomm 4.4 kernel) governor.
• Provides an add-on that maintains kernel settings on unrouted devices.
• Synapse: System Tweak add-on available.
• Synapse: Provides configuration profile separated by performance / battery / stability.
• Many other optimization applications.
Credit (Thanks. to)
AndreiLux - Perseus8890 kernel.
tkkg1994 - SuperStock Kernel.
arter97.
All members of the PRIME-Kernel NaverCafe.
And all of commited in sources & all of xda developers.

need donate for unlock feature....that not good

ayed78 said:
need donate for unlock feature....that not good
Click to expand...
Click to collapse
Oh. Put me off flashing in that case.

ayed78 said:
need donate for unlock feature....that not good
Click to expand...
Click to collapse
What is there that needs donating?
I'm using MTweaks and it can be customise without problems
---------- Post added at 19:59 ---------- Previous post was at 19:57 ----------
@Hyunwoo AHN
10x for your hard work
I'm testing your kernel right now.

artaniss11k said:
What is there that needs donating?
I'm using MTweaks and it can be customise without problems
---------- Post added at 19:59 ---------- Previous post was at 19:57 ----------
@Hyunwoo AHN
10x for your hard work
I'm testing your kernel right now.
Click to expand...
Click to collapse
with mtweaks doesnt full feature...that kernel built in with synapse

ayed78 said:
need donate for unlock feature....that not good
Click to expand...
Click to collapse
For what do I have to donate?

ayed78 said:
need donate for unlock feature....that not good
Click to expand...
Click to collapse
Reported him.

nestade said:
Reported him.
Click to expand...
Click to collapse
Isnt the addon only for unrooted devices and extra "system tweaking" features? Without this feature, I assume this is the same as other kernels available for s7, no?

ayed78 said:
need donate for unlock feature....that not good
Click to expand...
Click to collapse
The functions released by donation are designed to be independent of the kernel source code and are a utility concept. These functions are not required, and functions that do not exist in other kernels can be ignored.
I also respect the GPL license and do not mind it.

Hyunwoo AHN said:
The functions released by donation are designed to be independent of the kernel source code and are a utility concept. These functions are not required, and functions that do not exist in other kernels can be ignored.
I also respect the GPL license and do not mind it.
Click to expand...
Click to collapse
ignore ignorant haters bro...top kernel.
good to have lots of developer for device..
as users we are free to not-use :cyclops:
kernel has many features
synapse shows some errors but is the only tool you can use to manipulate kernel.
Mtweaks not show important features...
btw.if I was from S.Korea...I be digging tunnels :crying:

EAS works?
many devs gave up...

Calvin.manneson said:
EAS works?
many devs gave up...
Click to expand...
Click to collapse
Actually it works well.
It was a success with the experience of porting Linaro-EAS solely in linux 3.10.x kernel (note 4). It took about 6 hours.

Calvin.manneson said:
EAS works?
many devs gave up...
Click to expand...
Click to collapse
Perhaps? The reason they gave up is that EAS has already been overlooked as being included in the Linux-3.18.x kernel.
Adding new code over the existing EAS makes it easy to port.

Hyunwoo AHN said:
Perhaps? The reason they gave up is that EAS has already been overlooked as being included in the Linux-3.18.x kernel.
Adding new code over the existing EAS makes it easy to port.
Click to expand...
Click to collapse
good-work...
hope you have thick-skin.lots of aggressive trolls around

F2fs support?

@Hyunwoo AHN
amazing kernel thanks for it!
just small question, look at attached capture of synapse
is it ok?
I think there is something wrong with swap...
i cleared synapse data and still

Calvin.manneson said:
EAS works?
many devs gave up...
Click to expand...
Click to collapse
EAS needs ROM/Kernel side commits is Sched CPU Gov in this? didn't check github for EAS stuff yet

liam_davenport said:
EAS needs ROM/Kernel side commits is Sched CPU Gov in this? didn't check github for EAS stuff yet
Click to expand...
Click to collapse
no Sched, but explanation offered by dev.

Can we use it with S8 port ROMs?

sinan33 said:
Can we use it with S8 port ROMs?
Click to expand...
Click to collapse
Yeah. It's written in the OP ?

[KERNEL] MALAKAS KERNEL r189 [GCC10][UPDATED❯ *9-8-13* ]

[size=+2]DISCLAIMER[/size]
Code:
[I][center]* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but I'm very interested in thermonuclear war, so if you point the finger
* at me for messing up your device just because of this kernel,
* I will send you to mars on a nuclear rocket. Act accordingly.
* I know this paragraph is conspiracy-related,
* so don't ask about it. Welcome...[/center][/I]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[size=+2]ABOUT[/size]
[size=+1]The Malakas Kernel or MLX, is a balance between speed & efficiency with all latest patches optimized to take full advantage of your device.
It is made off Lineage source to ensure optimal working state. The MLX kernel is one of the most patched kernels adapting work from famous developers like Sultan for example.
Work on this kernel is very serious and will continue to improve even further.
Works on both MIUI and custom roms.[/size]
[size=+2]PREREQUISITES[/size]
1. Unlocked bootloader.
2. Working TWRP/Recovery. (CLEAN FLASH IF YOU HAVE ISSUES)
[size=+2]FEATURES[/size]
Toolchain used self compiled GCC 10 snapshots
Upstreamed from android-linux-stable/msm-4.9 (+ f2fs-stable + android-4.9)
Merged latest LineageOS 16.0 updates
Merged CAF tag LA.UM.7.3.r1-07900-sdm845.0 (+ other CAF cherry picks)
Touchscreen drivers always updated to the latest versions
Touch/Input lag reduction and increased touch smoothness
Dt2w/Dt2s
Fast charging
USB Fast charge control
Sultans simple low memory killer
Kcal Display color control
Klapse v5.0 Livedisplay kernel module
Backlight expanded limits of minimum/maximum brightness control
Sound control
Fsync control
Swap
Zswap
Zram (deflate, lzo, lz4, lz4hc, zstd)
Support added for F2FS, NTFS, SDFAT, VFAT, EXFAT
MAC address randomization
Wireguard Support
300 Hz scheduler tick
GPU 180-710Mhz / optional GPU OC manually 180-820Mhz (preconfigured in MLX tweak)
Non Display OC / Display OC TIANMA panels 69hz - EBBG & JDI panels 65hz
Many more patches and improvements, check commits
TCP Congestion Algorithms :-
Code:
westwood, reno, cubic, bbr, bic, cdg, dctcp, highspeed, hybla, htcp, vegas, nv, veno, scalable, lp, yeah, illinois
CPU Governors :-
Code:
conservative, ondemand, userspace, powersave, performance, schedutil, blu_schedutil, pixutil
GPU Governors :-
Code:
compute, mem_latency, bw_hwon, msm-vidc-llc, msm-vidc-ddr, gpubw_mon, bw_vbif, msm-adreno-tz, cpufreq, userspace, powersave, performance, simple_ondemand
I/O Schedulers :-
Code:
noop, deadline, cfq, fiops, sio, bfq, anxiety, zen, maple, tripndroid
Zram compression algorithms :-
Code:
deflate, lzo, lz4, lz4hc, zstd
[size=+2]CHANGELOGS & ADDITIONAL INFO[/size]
Because I will not be updating this thread regularly you can keep an eye out on the original kernel thread from beryllium for changelogs and more updated info.
Original updated thread for additional info: here
Changelogs: here
Frequently Asked Questions: here
[size=+2]INSTRUCTIONS[/size]
1. Have a clean setup. (rom, boot.img & vendor)
2. Install magisk & reboot to rom.
3. Reboot to recovery (clean) flash the kernel & DON'T wipe dalvik/cache. (wiping cache will give bugs in MIUI and most likely give you the app open delay bug)
4. Power on the device and boot to android.
These steps only need to be repeated if you update your setup.
[size=+2]SOURCE CODE[/size]
Kernel: https://github.com/thanasxda/malakas_kernel_xiaomi_sdm845
[size=+2]DOWNLOADS[/size]
Below...
[size=+1]❯❯DOWNLOAD HERE[/size]
[size=+2]SUPPORT[/size]
This is my personal project and am working alone on this, if you appreciate my work you can help by getting me a beer.
[size=+1]❯❯Click here to buy me a beer[/size]
Make sure to hit the Thanks button if you appreciate this! :good:​

reserved

thanas said:
reserved
Click to expand...
Click to collapse
you checked this kernel? which result in geekbench and antutu?

@thanas great kernel name....hahahaha most here will never understand

mikekote666 said:
@thanas great kernel name....hahahaha most here will never understand
Click to expand...
Click to collapse
i mean seriously xD?

@thanas Had a reboot today and I have attached a log cat. I believe it was around 16:48. It may not have been kernel related but wanted to share with you in case it was. I was part of the testing guys on telegram. Hope it helps. Running havoc 2.7

Runs smooth
Flashed this kernel 10hrs ago with new xiaomi.eu 9.7.11 and had no issues so far.
Good work, keep it up and thank you for your effort.
Heres some Antutu and Geekbench scores.

mikekote666 said:
@thanas great kernel name....hahahaha most here will never understand
Click to expand...
Click to collapse
Great, now you made me Google it. [emoji38]
Sent from my Mi MIX 2S using Tapatalk

Best Kernel !!! Over 318k

thk !!! Best Kernel !!!

updated

cool
thk !!! Best Kernel !!!

haha didnt expect this warm welcome. thank u guys, constantly improving. make sure to read the faq.
i will mention the most important things though.
if facebook opens slower than half a second dont ever wipe cache because there is an app open speed bug which makes apps open even slower than stock kernel, otherwise it is extremely fast.
never wipe cache for miui as well otherwise you face even more bugs.
dont use viper4audio because it makes scores suffer. neither use LKT nor lspeed because you will get bugs.
also evaluation thermals are not anymore on by default.
read the faq despite.
hope everyone enjoys. thanks

I experience charging disconnections.
Inviato dal mio MIX 2S utilizzando Tapatalk

yet again. minor update

mikekote666 said:
@thanas great kernel name....hahahaha most here will never understand
Click to expand...
Click to collapse
A$$h0l3 kernel ..Greek word with Latin characters. Smart? No, funny? Yeah

updated

thanas said:
updated
Click to expand...
Click to collapse
Hello thanas! Thank you for your work ! Can u add support iptables in the kernel?

So far, I like newest build and with blu_schedutil I get very good bb. Thank you and keep up the good work

i install latest version over miui rom and it erease everything on my phone :/

[MODULE] ZeetaaTweaks Rebase - Tweaks your kernel parameters

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What does?
- A Simple shell script which leads to tweak your kernel parameters to have a better overall experience in ur phone
Features:
- Reduce Jitter Latency
- Optimizes Ram Management
- Reduce Performance spikes
- Enable ECN negotiation by default
- Allows sched boosting on top-app tasks (Thx to tytydraco)
- Cgroup Boost (Credits to darkhz for uclamp tweak)
How to use?
- Install the Zeetaa Tweaks module zip below
- After install, Flash the magisk module in Magisk and reboot
- Wait about 60/120 seconds after boot
- Then Catch logs at data/ZTS/log.txt
- To check if its working
Download
Github
Support​
Notes:
- No, This isn't a module focused only in performance or that stuff
- If you have bugs or anything weird join the support group to report there or in this thread
- Enjoy

Zeeta pro

Pro af

New Beta Update!
Changelog:
- Changes to Watermark boost(To be worked)
- Added more vm tweaks
- Set dirty ratio to 10(Better Performance)
- Tweak dirty_background_ratio
- Disable Timer Migration
- Sleep 60s instead of 120s(120s its too much)
Download
Support
Github

Installed Zeetaa-Tweaks-Rebase-BETA.zip, Zeetaa-Tweaks-master.zip (with Zeetaa Tweaks-3 app) , looks working, but the phone speaker becomes mute (no sound). Disable ZeetaaTweaksApp in Magisk then the phone spekaer working again. Either select Masik Pulse Audio or not in the magisk module installation giving same issue (speaker mute). Using in pixel experience custom rom with Android 11 with LG V20. Any suggestions?

jason2ykk said:
Installed Zeetaa-Tweaks-Rebase-BETA.zip, Zeetaa-Tweaks-master.zip (with Zeetaa Tweaks-3 app) , looks working, but the phone speaker becomes mute (no sound). Disable ZeetaaTweaksApp in Magisk then the phone spekaer working again. Either select Masik Pulse Audio or not in the magisk module installation giving same issue (speaker mute). Using in pixel experience custom rom with Android 11 with LG V20. Any suggestions?
Click to expand...
Click to collapse
Don't install that versions use *only* the Rebase version

Does this work with custom kernels?

Ashieboy™ said:
Does this work with custom kernels?
Click to expand...
Click to collapse
Yes

New Beta Update!
Changelog:
- Enabled sched boosting on top-app tasks again
- Optimized Watermark boost tweak
- Removed Less latency tweak
- Removed Debugging tweak
- Removed Sched Autogroup tweak
- Removed lease-break-time tweak
- Fix some types of words (Thx to NitroVenom)
Download
Support
Github

What does?
- A Simple shell script which leads to tweak your kernel parameters to have a better overall experience in ur phone
Features:
- Reduce Jitter Latency
- Optimizes Ram Management
- Reduce Performance spikes
- Enable ECN negotiation by default
- Allows sched boosting on top-app tasks (Thx to tytydraco)
- Cgroup Boost (Credits to darkhz for uclamp tweak)
How to use?
- Install the Zeetaa Tweaks module zip below
- After install, Flash the magisk module in Magisk and reboot
- Wait about 60/120 seconds after boot
- Check internal storage for logs (ZeetaaTweaksMode & ZeetaaTweaks)
- To check if its working
Download
Github
Support​
Notes:
- If you have bugs or anything weird join the support group to report there or in this thread
- Enjoy

Would like to know some feedback of this please.
@Zeetaa ,btw,youre Portuguese?

lapirado said:
Would like to know some feedback of this please.
@Zeetaa ,btw,youre Portuguese?
Click to expand...
Click to collapse
Yes i am

Zeetaa said:
Yes i am
Click to expand...
Click to collapse
Boa! Daqui um compatriota

lapirado said:
Boa! Daqui um compatriota
Click to expand...
Click to collapse
Hahahha boas?

Zeetaa said:
Features:
- Reduce Jitter Latency
- Optimizes Ram Management
- Reduce Performance spikes
- Enable ECN negotiation by default
- Allows sched boosting on top-app tasks (Thx to tytydraco)
- Cgroup Boost (Credits to darkhz for uclamp tweak)
Click to expand...
Click to collapse
If about features, is it possible with this module to "enable" fast charging on Galaxy S10 when I use charger other than Samsung?
I notice that while using Baseus, Hama or any other charger no matter if 20W, 30W or more then it charges in range 500-1100 mAh... Of course same is about wireless charging (where I have 15W top model charger from Baseus) - it should anyway charge around 10W not 4-6W...

I am looking forward for answer, thanks