Related
I used to love SPB backup for keeping my data safe when I screwd up my phone too much, but for some reason I have less good experiences with the SBP / Diamond combination.
First all, my faforite contacts dissapeared from the TF3D tab when restoring a backup (happened to me several times), then my music player went crazy after another restore and finally it crawled up and died in a quiet corner after another restore... I had to hard reset to get it alive again... and re-install everything...
This never happened to me while doing the same thing on a HTC Touch...
Am I missing something or is SPB Backup not working properly on the diamond???
Is sprite backup any better???
Ps: I use stock NLD ROM 1.93
i don't like Sprite or SPB Backup for the Diamond, neither seem to work properly! At the moment i'm using Jeyo Mobile companion for the Contacts, Messages (SMS,MMS,Email) etc and it seems to be ok as it also saves the message threading too which is a bonus!
That is weird, i use spb backup also and have no bissues with that. just can advise you to go through all the settings as there are several that need to be set correctly. Also during restore you need to correct the options for restore.
If you set it up correct all will be restored.
Grtzzz Machineman
What is your SPB backup version ?
I found SPB backup caused only problems with my M700. For the Diamond I just copy all data off, and fortunately use Outlook on Exchange to resyn contacts, email etc etc.
I then have to reinstall all apps :-(
I have it down to a 10 minute, fine art.
Have used Spb Backup for while with my Diamond and no problems.....perhaps a re-install of the program is in order
arix said:
What is your SPB backup version ?
Click to expand...
Click to collapse
SPB backup 2.0 I think, I just downloaded the latest version and used that, su I am up to date...
I think the SPB cannot handle the internal memory or the TF3D settings or something...
I think I will make just backups of email and contacts etc and also learn how to install everything in 10 minutes like Sickboy555
[Idea] Would it be possible to create one big exe or cab file from several loose cab file's and maybe also integrate some reg tweaks, so I can install them all in one go?
Chris1974 said:
SPB backup 2.0 I think, I just downloaded the latest version and used that, su I am up to date...
I think the SPB cannot handle the internal memory or the TF3D settings or something...
I think I will make just backups of email and contacts etc and also learn how to install everything in 10 minutes like Sickboy555
[Idea] Would it be possible to create one big exe or cab file from several loose cab file's and maybe also integrate some reg tweaks, so I can install them all in one go?
Click to expand...
Click to collapse
I m using the latest version as well (2.0 something) and I have no problem at all,
I made restore from backup few times and all were ok..
The problems I saw that while using my local interface language instead English it made some problems, so I m using English iterface anyway and Just have to change from local language to English after HR..(u can use
other language , but b4 backup change to english)
2 more thing that u should take care:
1. save all the backup u make (once in 1-2 weeks or something) in your PC.
and if problem with one restore u can use the previous one..
sometines u have problem due program that u installed and u make a backup
with the problem (otherwise why to make HR and restote ?), and the prblem still exist after restore...
2. Do SR b4 backup , u get "clean" RAM for backup...
If you are discussing technical problems with a backup program, and you arent sure of the prog version, you are just wasting your own and everyone elses time. Find out.
hello,
before starting a backup reset your device.
and before you playing the backup back, reset it too.
than you will never became problems with your spb-tool.
sometimes you have really wait for ending of backup(ping) or restoring.
dont wait and reset your device and try again.
no prroblem that you dont know your version,
because a backup-program is for backup(ping)/restoring,
an essentuelly needed tool for all devices of the world.
dont sell if dont well !!!!
check the german o2-site (http://www.o2online.de/nw/support/downloads/software/xda/xdadiamond/index.html) for money-less backup-tool.
okokur
I have been using SPB Backup (and Weather and Shell) with no problems on my Diamond.
spb backup 2.0.1 build 3092
sometimes i had "messing" contacts (doubled from sim) but all the rest worked fine. I'm on 3rd rom installation and after flashing/Hresetting i just restore my last backup of the old rom using the option "rom upgrade" thicked.
all ok: custom weather, powermanagement, background 4all pages, font fix and so on... (to be sure i keep this "system" cabs in an internal storage folder named "mayday").
I run a scheduled nightly backup everyday
boglll said:
spb backup 2.0.1 build 3092
sometimes i had "messing" contacts (doubled from sim) but all the rest worked fine. I'm on 3rd rom installation and after flashing/Hresetting i just restore my last backup of the old rom using the option "rom upgrade" thicked.
all ok: custom weather, powermanagement, background 4all pages, font fix and so on... (to be sure i keep this "system" cabs in an internal storage folder named "mayday").
I run a scheduled nightly backup everyday
Click to expand...
Click to collapse
While u using nightly backup everyday it means u don't know if u have "stable" mobile since it makes restart
everyday after backup .. when I had problems b4 restore
old backup I got restart without reason every night, and I see it as problem...after restore no more restart every night..
I think sprint support messed with my diamond
I use spb backup 2.0.1 build 3092 as well and backups run fine. The only thing I don't like is that after backup runs it always wants a reboot even if you tell it not too, and the option to automatically enter pin on reboot doesn't really seem to work, it hangs on windows 6.1 green screen while booting and finishes when you enter the pin code. I haven't really played with restore though. I did find after talking with sprint advanced technical support the other day, my phone suddenly lost the tf3d quick contacts and then also required full contact sync with outlook. It seemed that something tech support did remotely wiped out all my contacts! Has anyone else ever experienced this? I thought this happened on my original touch as well once or twice. Does sprint have this capability? Has it ever happened to anyone else? Am I just paranoid?
Let me apologize first of all as I come from 5 years of using Windows Mobile knwoing what I am doing (cooking ROMs included) and now just got my Galaxy /Android a couple weeks ago and am blank at all of it.
After messing up with some system files and (useless) stock applications (like I removed stk.apk and other stuff) I decided to do a full hardware reset as the phone started getting random crashes.
But after the full reset things only got dramatically worse. I quickly realized all the missing system apps are still missing (I thought they'd be "restored") and basically nothing works, just crashes one after the next, cant use anything.
So, a hardware system reset on the galaxy, doesnt really reset anything except user installed apps and settings... amazing
Can someone please tell me (the idiot here, I know) how to do a real full restore where all system files, all missing files and positively everything gets back in the Tab as it was originally?
What a flippin' nightmare... Thanks in advance very much!
deletion of Stk.apk causes FC's in phone and acore.
if you don't have a backup of this apk, download a rom (like Modaco or Overcome),
open with winzip and extract the Stk.zpk from system/app and push it to /system/app on your Tab using adb (remember set the permissions to 644 after push).
A hardreset NO restores deletions on /system
Note: Other files that are not deleteable in /system/app are: Browser.apk, Email.apk, TouchWiz30Launcher.apk and TwWallpaperChooser.apk
Note (2): For your convenience, i attach the Stk.apk file from Overcome-1.1.3. Try it
Note (3): In order to restore ALL system data and apps, you need to restore a full rom.
bartito said:
deletion of Stk.apk causes FC's in phone and acore.
if you don't have a backup of this apk, download a rom (like Modaco or Overcome),
open with winzip and extract the Stk.zpk from system/app and push it to /system/app on your Tab using adb (remember set the permissions to 644 after push).
A hardreset NO restores deletions on /system
Note: Other files that are not deleteable in /system/app are: Browser.apk, Email.apk, TouchWiz30Launcher.apk and TwWallpaperChooser.apk
Note (2): For your convenience, i attach the Stk.apk file from Overcome-1.1.3. Try it
Note (3): In order to restore ALL system data and apps, you need to restore a full rom.
Click to expand...
Click to collapse
OK, first of all a big thanks for both file and info. Aside from the Stk.apk, the biggest thing that made me run into problems was trying to update my Contacts.apk:
http://forum.xda-developers.com/showthread.php?t=907399
things didnt work out for me and even after restoring the original files (Contacts.apk and Contacts.odex) nothing really worked again, reason for wich I tried a system reset.
Now, do I need to re-root the Tab or its still rooted, and can I perform the operations easily with Root Explorer like I did before? You mentioned to use adb and set permissions to 644 after push but, sorry again for the ignorance, I have no clue what adb is nor what/how to set permissions. Pathetic to be ignorant huh?
My last 2 questions are, where could I find the original Contacts.apk and Contacts.odex and if needed a full ROM to do a total restore?... hopefully I wont need to get to that point?...
Thanks a million again.
hi,
try to download overcome-1.1.3, and extract all the deleted apk's from system/app directory. push into the /system/app in your tab.
the apk's of overcome are deodexed (you don't need the .odex files). after that, wipe your data/cache and reboot.
if this don't works, try with roto rom
bartito said:
hi,
try to download overcome-1.1.3, and extract all the deleted apk's from system/app directory. push into the /system/app in your tab.
the apk's of overcome are deodexed (you don't need the .odex files). after that, wipe your data/cache and reboot.
if this don't works, try with roto rom
Click to expand...
Click to collapse
Hmmmm thanks again but I think Im beyond all this. I dont have a file manager on my system, just realized I deleted the useless stock one and had repalced it with Root Explorer and ES File Explorer. I have them on my External SD Card to install them again but withou a file manager or an app installer cant get to them. And I tried download an app installer from the Market and get Framework errors non-stop and downloads do not initialize... I think Im beyond a quick fix... how do I get my hands on a stock full ROM to restore everything... and how? What a nightmare... gotta tell you, I love Windows Mobile... I love it... never ran into anything like this in the past 5 years of using it... never...
Thanks again!
use "adb" in order to access to your tab from your desktop pc.
bartito said:
use "adb" in order to access to your tab from your desktop pc.
Click to expand...
Click to collapse
Cant. Dont even know if I need Kies installed or not (I did have it installed) but adb just asks me to connect the phone and thats it... its connected aready... this is desperating...
OK I did manage to connect with adb but, how to I install applications? I can navigate to my SD card where I have ES File Explorer and Root Explorer but dont seem to be able to install them... Also if i try to copy Stk.apk I get immediately an failute message... this is crazy...
OK so I managed to install ES File Explorer and Root Explorer with adb... crazy process. It seems my phone is still rooted after the reset. From the phone I copied Stk.apk back to /system/apps where it was before deleted.
But needless to say nothing got fixed... not sure if Stk.apk is now "actually" installed or just there in the folder. But still nothing works and crashes every 10 seconds... logs provider, dialer, phone, framework, contacts... its all a firework of crashes...
Given that you've hard reset your device already, you are pretty much wasting your time trying to "fix" what you broke by messing with /system, and you should really just flash another ROM.
My suggestion would be to follow the advice on this thread.
Regards,
Dave
Yeap, that what i did and it was succesfull. My only issue is that Id like to convert my Tab's file system to ext4 to improve speed and performance and then update to the 1.4Ghz OC Kernel. I have no idea how to do those 2 things... actually Im not sure I understand the difference between a ROM and a Kernel... I assume a Kernel is part of the engine of the ROM itself but I have no idea how to perform the update. I read countless threads and its all scattered info without finding one straight to the point guide on how to do it...
Thanks again
VeEuzUKY said:
Yeap, that what i did and it was succesfull. My only issue is that Id like to convert my Tab's file system to ext4 to improve speed and performance and then update to the 1.4Ghz OC Kernel. I have no idea how to do those 2 things... actually Im not sure I understand the difference between a ROM and a Kernel... I assume a Kernel is part of the engine of the ROM itself but I have no idea how to perform the update. I read countless threads and its all scattered info without finding one straight to the point guide on how to do it...
Thanks again
Click to expand...
Click to collapse
Part of your problem is that you are trying to run before you can walk! Your experience with WinMo is of pretty much no use to you in the Linux/Android world, and until you get a better handle of how everything hands together you are always going to feel a little lost.
Personally, since your device is now up and running again, I'd suggest that you hold off doing anything else for while, until you get a chance to catch up with some of the basics. Once you are a little more familiar, you can then start with something simple like flashing the MoDaCo kernel (instructions here) to support EXT4, and to give you access to ClockworkMod recovery.
IMO, whilst EXT4 and O/C kernels will give you a performance boost, they are not as noticeable as jumping from a shipping ROM to one of the JMx development builds that Samsung has put out. If you are running JMI, you should already be feeling that the device has got much snappier.
Regards,
Dave
foxmeister said:
Part of your problem is that you are trying to run before you can walk! Your experience with WinMo is of pretty much no use to you in the Linux/Android world, and until you get a better handle of how everything hands together you are always going to feel a little lost.
Personally, since your device is now up and running again, I'd suggest that you hold off doing anything else for while, until you get a chance to catch up with some of the basics. Once you are a little more familiar, you can then start with something simple like flashing the MoDaCo kernel (instructions here) to support EXT4, and to give you access to ClockworkMod recovery.
IMO, whilst EXT4 and O/C kernels will give you a performance boost, they are not as noticeable as jumping from a shipping ROM to one of the JMx development builds that Samsung has put out. If you are running JMI, you should already be feeling that the device has got much snappier.
Regards,
Dave
Click to expand...
Click to collapse
Yes Dave you are right, right and right again!!! Thank you for the wisdom and advice!!!
The main thing I have understood with today's messy experience was that the actual ROM files are never deleted or damaged as long as you dont access them via a rooted tool and start deleting them. Now I understand that Titanium Backup, Sprint Backup (my favorite), My Backup Pro and others, only back-up and restore what the user installs on top of the ROM itself. So a full "reset" wipes all that data but leaves the ROM files as they always were. If they got damaged in the process, they'll still be damaged till a a full ROM restores all system data, now I get it.
What I still dont get is the issue of bakcing up and restoring. In Windows Mobile, a toll like SPB Backup has a simple option called FULL BACKUP and that backs-up everything on top of the ROM and then restores everything after a full reset on top of the ROM again like it was before. The problem I have with apps like Titanium Backup, Sprint Backup, My Backup Pro, etc... is that there is not a "BACKUP ALL" option... one has to backup "data", "settings", "apps" and I always feel stuff will be left behind and then not restored.
Till I find an app or way to do a simple one-click "backup everything" and then "restore evertything" I always feel vulnerable to changes I make to the Tab that may get it unstable or corrupt and then not being able to be restored properly without a full ROM Flash and then re-installing all from scratch.
With WinMo, I could do all sorts of crazy experiments and tweaking and after that, a registry restore or back-up restore would bring me back my phone to exactly like it was with all my stuff and configuration in a matter of seconds or minutes. Thats what I need to find out with this Tab/Android and then Im ready to be able to explore messing up with this knowing I can always easily go back within minutes to the state I had before with all my apps and settings.
This is what I need to learn next how to do! Trampoline without a safety net is not a good idea. Ive alwways loved WinMo for the ease of backing up and restoring whatever I was doing on my handsets withjout ever worrying to put myself at risk to loose it all. I need to learn this on Android and its definitely more intricate!
just put sdcard into your samsung tab and flash modaco kernel amd it will automatically covert to ext4, after that you can flash the 1.4ghz kernel you wanted.
Sent from my GT-P1000 using XDA App
instechgainza said:
just put sdcard into your samsung tab and flash modaco kernel amd it will automatically covert to ext4, after that you can flash the 1.4ghz kernel you wanted.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Sorry, I cant follow you. I put an SD card in and flash modaco kernel? What files do I put on the sd card for this effect?...
VeEuzUKY said:
Sorry, I cant follow you. I put an SD card in and flash modaco kernel? What files do I put on the sd card for this effect?...
Click to expand...
Click to collapse
no...you need a kernel to flash via odin, you need sdcard mounted so that it will backup all files automatically while converting to ext4..head over to modaco kernel section amd follow the instruction.
Sent from my GT-P1000 using XDA App
instechgainza said:
no...you need a kernel to flash via odin, you need sdcard mounted so that it will backup all files automatically while converting to ext4..head over to modaco kernel section amd follow the instruction.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Where is the modaco kernel section you refer to? I can search for hours and find zilch... these blogs are endless...
VeEuzUKY said:
What I still dont get is the issue of bakcing up and restoring. In Windows Mobile, a toll like SPB Backup has a simple option called FULL BACKUP and that backs-up everything on top of the ROM and then restores everything after a full reset on top of the ROM again like it was before. The problem I have with apps like Titanium Backup, Sprint Backup, My Backup Pro, etc... is that there is not a "BACKUP ALL" option... one has to backup "data", "settings", "apps" and I always feel stuff will be left behind and then not restored.
Click to expand...
Click to collapse
What you want is a Nandroid backup, which you can only make from a recovery image like Clockworkmod recovery.
Essentially, this does exactly what you want, but you need to flash a new kernel (e.g. the MoDaCo kernel) which supports Clockwordmod.
Regards,
Dave
bartito said:
deletion of Stk.apk causes FC's in phone and acore.
Click to expand...
Click to collapse
i beg to differ about stk.apk fc's your phone. that's the first thing i delete when removing system apps with no fc's
refer to this link about having a bare bones system. stk.apk is for management of multiple sim cards
http://wiki.cyanogenmod.com/index.php?title=Barebones
b0ricuaguerrero said:
i beg to differ about stk.apk fc's your phone. that's the first thing i delete when removing system apps with no fc's
refer to this link about having a bare bones system. stk.apk is for management of multiple sim cards
http://wiki.cyanogenmod.com/index.php?title=Barebones
Click to expand...
Click to collapse
When I delete stk.apk (for me useless useless useless) the first thing that happens immediately is that when I hang-up on a call made or received, the Tab vibrates then freezes for about 5 seconds then tells me the phone application has crashed. I tried this with 2 ROMs now as a test and its guaranteed. More even, if you use a program like SYSTEM APP REMOVER you can emulate the removal of an app by disabling it... it only takes me to disable STK and a reboot for the phone not to work. cant get rid of it, that simple
Hello,
I've problem with some custom roms (full wipe), where I'm not able to connect to WIFI.
Just remark now that in this case, there is no MAC address in advance parameters of wifi configuration.
I've tried to flash from a working rom without wipe data and the wifi works (but rom has bugs). So I think there is an app somwhere (or app's data) that is missing in the problematic rom.
Did anyone know wich application read the MAC addres, so I can try to restore it from a titanium backup?
Thanks
None of these helps?
http://forum.xda-developers.com/showthread.php?t=1427104
http://forum.xda-developers.com/showthread.php?t=1441573
http://forum.xda-developers.com/showthread.php?t=1453641
And instead of eth0 i think to remember it has to either be wlan0 or something very similar to this...
You'll find it out. Try busybox and fixpermissions from within RomManager first.
I've already try to fix permission in Rom Manager.
Just copy the Wifi folder in system\ect of a working rom, try to restore the other rom to compare what I have in it
Thanks !
ok, I give up...
folder system\etc\wifi doesn't matter, there some missing data somewhere else but too lazy to get it work, so I change rom
After several install of a ROM (namely BCM from zero-cool), my /data/data dir begins to grow out of control.
I suspect some data are not used anymore, but this dir is not wiped by a new install (that's better like that BTW).
How could I know which directories are not needed anymore by the installed applis?
Any ideas, fellows?
ivanoff7 said:
After several install of a ROM (namely BCM from zero-cool), my /data/data dir begins to grow out of control.
I suspect some data are not used anymore, but this dir is not wiped by a new install (that's better like that BTW).
How could I know which directories are not needed anymore by the installed applis?
Any ideas, fellows?
Click to expand...
Click to collapse
What? I'm sorry but i don't understand your question? Your data partition grows? Did you try a full wipe?
race55 said:
What? I'm sorry but i don't understand your question? Your data partition grows? Did you try a full wipe?
Click to expand...
Click to collapse
Yes of course, I could do a wipe but I would have to configure all my apps again.
But maybe I can backup the data and restore it app by app, whenever an appli is installed. Not very practical but probably efficient.
Hello,
I'm a beginner lost in reading all the useful information on this forum.
I started with the idea to reduce the permissions of applications of my Razr I.
Google pointed to this http://www.xda-developers.com/protecting-your-privacy-app-ops-privacy-guard-and-xprivacy/
And I'm really happy and surprised about all information I can find here, thank you that much for
making this possible to all of you!
As today I feel ready to start playing around with my phone I wanted to ensure I understood the items right.
May be for you it takes only some seconds to verify my guess and can give a short notice
about Step 2 or 3 is easier to become implemented.
Step 1.) I wanted to do a full backup before I start, following this thread:
So I'll install ADB on my PC and run "adb backup -f FullBackup.ab -apk -all"
This works on a Razr I with 990.43.74.xt890.Retail.en.EU - of the shelf and is not risky at all - or?
Could you pls. tell whether it is really true I can switch back to my backup if I'm not happy with my System?
Step 2.) My first intention was to root my device and install Xposed framework
http://forum.xda-developers.com/showthread.php?t=2299428
http://repo.xposed.info/module/de.robv.android.xposed.installer
And to use Permission Master out from google play store
First of all I wanted to ask you whether this is feasible technicaly and esp. for a beginner?
Alternative to Step 2 Step 3?
Step 3.) In general I'm happy with my Razr I Android 4.4.2 (990.43.74.xt890.Retail.en.EU)
But I'm wondering whether it would be easier or has less risk to use a custom ROM instead of implementing Step 2.
By reading in this forum I found out there is a planty of features FM-Radio, enhanced stand-by current ,
to get rid of preinstalled aps and so on.
I'm an embedded developer but do not have the overview about the architecture of Android devices, what I got so far is:
There is a bootloader which needs to be changed from OEM closed to open.
There is a boot partition I flash ROMs in.
I need some tools on my PC combined with SDK and Motorola drivers to allow a USB-Debuging and flashing.
And sure as always once your bootloader is damaged you are lost, so I understand even backup will not help here.
So I'll keep my fingers crossed.
Thanking you in anticipation and pls accept my excuses about my english and stupid beginners questions.
Best Regards
gonso
PS:
As I main entry point I used the
http://forum.xda-developers.com/razr-i/general/index-razr-t2832722
from there I'll try to get ADB, drivers etc.
Hi GonsoXDA,
Step 1: I have never used it. Didn't even know that it existed. On the internet there are numerous people who uses it and it seems to work. Maybe someone else can give some info about this or just try it. U can try it with a non-important app and see if it works. Just backup it, delete it and restore it.
Step 2: This works just fine. But do know 3 things:
1. First root: To get root on stock rom, u need to use kingsdroot methode afaik. And that one sends your IMEI to some rare ip adress. I personnaly don't trust this and stay away from it, but there are many people who use it.
2. Xposed requires a recovery to install the framework. It can be done mannually or by the app i suppose. With only root u don't have a recovery on your device that can perform such action.
3. If something goes wrong only a full restore with RSD-Lite can most of the time help u out. Because u don't have a recovery that works than.
Step 3: We only have 2 full roms. 1 for JB (stock) and a working CM11 rom (kitkat).
Only the Jellybean roms support fm-radio, on every newer rom fm-radio is cut out of the audio firmwares. The risk of going to this is even less as Step 2, because u can do a full backup and restore of ur phone. ( I would chose for this if u want to play a bit with the phone and ur warranty is already out of years)
The gereneral idea about the android architecture is this (it is different for almost every device and the Razr I has many more thing to hold into account, but if u are here only for the roms and xposed, there is no more to know):
Bootloader: Is like an uefi bios for PC, but then for android. It also contains fastboot
Bootimage(boot): Has all the info like kernel and ramdisk to boot the system
Recovery: Is like 'boot', but boots into the recovery partition that lets u change every aspect of the device if u know how. Its mainly used to flash a custom recovery to, backup and restore a nandroid backup and flash/wipe roms, mods, (all/specific) data and packages.
Systempartition: Is the system the boot boots into. It's android.
Datapartition: Where all the user data is stored.
Cachepartition(dalvik): Where all cache is stored and in earlier android versions also dalvik. But not now anymore.
Fastboot: To flash/wipe the above partitions and many more (needs drivers)
Adb: To push, pull, command things in system or recovery (needs drivers)
Sdk: contain the abd and fastboot packages, but aren't needed for adb and fastboot because with the right drivers can work on there own (see the internet)
If u have a custom recovery and only change things on the system, data and cache partition there is almost no way to damage the phone. There is always a backup through recovery. As long as u stick to the things u can do in recovery.
The only thing tha can mesh up your phone beyond repair is doing wrong stuff withint the bootloader and other inner parts in the phone(like i did to get newer kernel working) or u are in bad luck and you internal memory blocks. See 'Super brick samsung phones' (emmc error).
I suggest:
- Unlock your bootloader
- Install custom recovery
- Make a backup with the recovery
- Do what u want, xposed on stock rom, try CM11?
- If things won't boot, restore through recovery
And always, read up before doing anything. There are thousands of articles about android, flashing things, repairing android, using adb and fastboot. AND ALWAYS HAVE A BACKUP PLAN!
Hello,
always having a backup seems not to be that easy.
So I unlocked my boot loader and tried to install twrp2850 and twrp2860 via mfastboot.
The mfastboot with 533.353kB caused the following "(bootloader) Variable not supported!"
I rebooted into bootloader and tried recovery -> horizontal Android man with a red !-rectangle
After reboot to normal power up my phone seems to be in factory reset, all my data is gone :crying:
ok crying dosn't help so I looked around and tried with another mfastboot 186.178kB and recoverycwm6.0.5.1.4.img.zip
http://forum.xda-developers.com/showthread.php?t=2441224
The twrp I tooked from here: http://forum.xda-developers.com/showthread.php?t=2278483 seems not to work.
I did a backup with cwm is there a change to get back my data? I think I know the answer.
In the meanwhile I installed
http://forum.xda-developers.com/razr-i/development/rom-unofficial-cyanogenmod-11-t2966855
And will try to install
http://forum.xda-developers.com/xposed/modules/tool-installer-xposed-installer-zenfones-t2983589
Thank you for the help, work and excuse the stupid beginner posts.
Regards
gonso
gonsoXDA said:
Hello,
always having a backup seems not to be that easy.
So I unlocked my boot loader and tried to install twrp2850 and twrp2860 via mfastboot.
The mfastboot with 533.353kB caused the following "(bootloader) Variable not supported!"
I rebooted into bootloader and tried recovery -> horizontal Android man with a red !-rectangle
After reboot to normal power up my phone seems to be in factory reset, all my data is gone :crying:
ok crying dosn't help so I looked around and tried with another mfastboot 186.178kB and recoverycwm6.0.5.1.4.img.zip
http://forum.xda-developers.com/showthread.php?t=2441224
The twrp I tooked from here: http://forum.xda-developers.com/showthread.php?t=2278483 seems not to work.
I did a backup with cwm is there a change to get back my data? I think I know the answer.
In the meanwhile I installed
http://forum.xda-developers.com/razr-i/development/rom-unofficial-cyanogenmod-11-t2966855
And will try to install
http://forum.xda-developers.com/xposed/modules/tool-installer-xposed-installer-zenfones-t2983589
Thank you for the help, work and excuse the stupid beginner posts.
Regards
gonso
Click to expand...
Click to collapse
Than u know the answer, it is no I think.
Both twrp images should work just fine, but always chose the latest. The message "(bootloader) Variable not supported!" doesn't do anything So don't worry about that one. There should be a lot more in you log that the message if twrp didn't install. U did extract it and flash it with the command: mFastboot flash recovery <recovery-image>. Where <recovery-image> could be C:/users/*/Downloads/recovery.img.
Hello,
yes sure "The secret of health for both mind and body is not to mourn for the past, worry about the future"
So I use CM11 now for about 2 days and I'm really impressed, so far everything works :good: THANK YOU!!!
As I asked already I installed XPosed and Permission Manager, but I found XPrivacy might be the better solution and switched to this.
(Today I do not have all the technical background to judge whether it is technically equivalent, but I'll investigate on it)
Esp. one thing I'm wondering, why XPrivacy is reading my Contacts once I check the permissions of an app?
But the more important thing I recognized differences between CM11 and the Stock ROM. One is the Entry
"Privacy" in the settings. It seems to be more or less the XPosed and XPrivacy, or?
But it seems the Restrictions are not shared, so I can restrict in the one and do not see the restriction in the other tool.
So first is there a risk to use both, is it useful or just doing the same twice.
Thank you
Gonso
gonsoXDA said:
Hello,
yes sure "The secret of health for both mind and body is not to mourn for the past, worry about the future"
So I use CM11 now for about 2 days and I'm really impressed, so far everything works :good: THANK YOU!!!
As I asked already I installed XPosed and Permission Manager, but I found XPrivacy might be the better solution and switched to this.
(Today I do not have all the technical background to judge whether it is technically equivalent, but I'll investigate on it)
Esp. one thing I'm wondering, why XPrivacy is reading my Contacts once I check the permissions of an app?
But the more important thing I recognized differences between CM11 and the Stock ROM. One is the Entry
"Privacy" in the settings. It seems to be more or less the XPosed and XPrivacy, or?
But it seems the Restrictions are not shared, so I can restrict in the one and do not see the restriction in the other tool.
So first is there a risk to use both, is it useful or just doing the same twice.
Thank you
Gonso
Click to expand...
Click to collapse
That's a sentence.
Why XPrivacy needs it i don't have a clue. For that sort of things u need to be by the dev of the app.
CM has a lot of features out of the box compared to stock, but stock is most of the time a bit more optimized in terms of proprietary stuff like camera.
So as u noticed, CM had an inbuilt security app. This app (CM) and XPrivacy don't share there settings, so that's the difference u see. But most likely if u disable something in one of the apps it is disabled even tho the other doesn't say it because it doesn't know of it.
I don't think it will be a risk. They both do the same thing, but they don't know about it. To be on the safe side, just use one and restore the other to default. U can always search on the web if they don't get along.
U can now make a full backup, so everything can be reverted and your data should be relative safe.
Hello,
thank you again - I now find the answer by reading in the development part of the forum. For me as a beginner it is sometimes not easy to interpret the discussions there.
If accepted I will use the thread now as a kind of diary, may be some other users will have similar destinations and my learn from my mistakes.
So to answer my question a little more detailed, but with less background know how than Hazou. Pls. do not trust me I'm a beginner, I have not analyzed the code just the behavior - feel free to correct or contradict my words!
The XPosed is in the area of permissions just a framework which allow other modules to put some code between an app requesting permissions and the Android core granting this permissions. The Xposed it self doesn't handle settings or permissions you did in modules like the CM Privacy, Permission Manager or XPrivacy.
As a result I came to the same conclusion it is not a risk, but an overhead to have more than one pice of code between the app requesting permissions and the Android core. -> My proposal: Do not use more than one of this Permission control apps in parallel.
From the privacy perspective the Permission is just a starting point, it allows you to hide your private information from the app. On the other side many apps will need access to the data to work and most of them are able to connect to the internet.
So I realized the next step would be the restriction of internet usage of apps. Here permissions are sword but we need a scalpel, to separate the necessary from the unwanted connections. This scalpel could be AFWall+ and "Netzwerk Log", this is a firewall and a sniffer.
What I can say to day the apps run on CM11 installed on my Razr I.
So it looks like I see my destination raising on the horizon and I will try to formulate it in the following order:
1.) Hide Contacts, Calls and SMS from Apps who do not need this to work -> XPrivacy
2.) Disable some Android features I think I don't need.
(e.g. Captive Portal Check - settings put global captive_portal_detection_enabled 0)
3.) Restrict the internet access of some apps to servers they need to connect. ( e.g. E-Mail client is restricted to connect to the mail server)
4.) Limit the access to my pictures, stored on SD card. [I have not found a solution so far]
If you read this I think 1 is reasonable for most of you, even if you do not have deep Android or Network know how (as I have), you just restrict the permissions - if app crashes or doesn't do the job you expect you may permit access or uninstall the app. (XPrivacy allows you also to fake data)
3 is a usual task of a network administrator, if you are used with iptables it is just work. I'll try to find out whether there is somewhere a source of "Templates". Usually the network admins share there common settings based on services, once I find out I'll post.
To restrict the access to SD Card I only see the change to extend the sandbox of Android to the SD and to hide files which does not belong to the app. As I would store my pictures on SD as I would store my Navi Data, but neither the Navi app should see my pictures nor the Cam and Gallery my Navi Data. ...
I don't know whether there is an app out there but It should be possible the same way like XPrivacy fakes the other data.
Thank you
Gonso
Hello,
Most of the time I used the numbers to just put in the extension, so if I want to call 0049 9876 54 321 I put the numbers 321 the Motorola dialer will show a list of all contacts where the number contains 321.
Some Numbers of contacts are not shown as well, seems if a contact has more numbers only one or two are shown.
The CM11 dialer doesn't show the number, is there a setting to get this feature?
I tried to get my Stock dialer back, so I copied dialer.apk from stock into the /system/sec-app/ directory of the CM11 and restarted the phone -> doesn't change the dialer ....
Any proposals? I'm terrible sorry for my stupid questions, I read several threads and still no idea about a possible solution
Gonso
PS: CM11 file manager shows a secure storage /storage/emulated/0/storage/secure - what is the algorithm used for the encryption.
gonsoXDA said:
Hello,
Most of the time I used the numbers to just put in the extension, so if I want to call 0049 9876 54 321 I put the numbers 321 the Motorola dialer will show a list of all contacts where the number contains 321.
Some Numbers of contacts are not shown as well, seems if a contact has more numbers only one or two are shown.
The CM11 dialer doesn't show the number, is there a setting to get this feature?
I tried to get my Stock dialer back, so I copied dialer.apk from stock into the /system/sec-app/ directory of the CM11 and restarted the phone -> doesn't change the dialer ....
Any proposals? I'm terrible sorry for my stupid questions, I read several threads and still no idea about a possible solution
Gonso
PS: CM11 file manager shows a secure storage /storage/emulated/0/storage/secure - what is the algorithm used for the encryption.
Click to expand...
Click to collapse
Stock CM dialer doesn't have that function afaik. The moto one doesn't work because it needs the Moto framework to work. Just download a dialer U trust from the playstore.
I don't have any clue about the secure storage, sorry.