Database Develop

[Q] HTC ONE M7 wont boot. Only fastboot mode...

Hello,
i got a htc one m7.
When i turned the device on i see only the bootloader.
See picture.
Also i get some information with squabbi toolkit.
See picture.
Can i restore to stock or is the device completly bricked?
I read a lot of posts and threads but i cannot found a solution.
The bootloader was unlocked but i locked them because i want to install a RUU.
But i doestn found the right RUU for my device.
I flashed allready a RUU called 4.19.401.9 but it failed with error 158.
Can anybody help me?

frischeis said:
Hello,
i got a htc one m7.
When i turned the device on i see only the bootloader.
See picture.
Also i get some information with squabbi toolkit.
See picture.
Can i restore to stock or is the device completly bricked?
I read a lot of posts and threads but i cannot found a solution.
The bootloader was unlocked but i locked them because i want to install a RUU.
But i doestn found the right RUU for my device.
I flashed allready a RUU called 4.19.401.9 but it failed with error 158.
Can anybody help me?
Click to expand...
Click to collapse
was the RUU signed or decrypted? have you checked MD5 value before flashing?
Try this one
MD5: 9ad4111ce86981e3dffcce6d9ee80551

alray said:
was the RUU signed or decrypted? have you checked MD5 value before flashing?
Try this one
MD5: 9ad4111ce86981e3dffcce6d9ee80551
Click to expand...
Click to collapse
Thanks for quick reply!!
The big problem is that i dont have always internet for downloading and the download speed isn`t cool......grrrrr.
But i give that a try if i connected. I dont have check MD5 .
Ist this the only way to wake up my phone flash a RUU?
Or gives other solutions?

frischeis said:
Thanks for quick reply!!
The big problem is that i dont have always internet for downloading and the download speed isn`t cool......grrrrr.
But i give that a try if i connected. I dont have check MD5 .
Click to expand...
Click to collapse
Always check MD5!! especially if you don't have a good internet connection!
Ist this the only way to wake up my phone flash a RUU?
Or gives other solutions?
Click to expand...
Click to collapse
you could flash a custom rom
What did you do with the phone before it got stuck in bootloader? have you tried do erase cache and rebooting?

alray said:
Always check MD5!! especially if you don't have a good internet connection!
you could flash a custom rom
What did you do with the phone before it got stuck in bootloader? have you tried do erase cache and rebooting?
Click to expand...
Click to collapse
Before i relock i can load a cwm recovery.
In the recovery i try everything: cache,data,system wipe - factory reset (failed and reload everytime) - try via sideload to install a custom rom (loading the file to device but cannot install...)
After that i read more about the device and i want back to clean stock......but now the only working is fastboot mode to managed the device via PC.
One thing i wont to try was the install a nandroid backup via OTG cable....but this works only in a recovery - right?
It would be nice to unlock the bootloader again so that i came back to recovery...but how?
The fastboot command " fastboot oem unlock" wont work...command error???!!!!!

frischeis said:
Before i relock i can load a cwm recovery.
Click to expand...
Click to collapse
Better to use TWRP 2.6.3.3 not CWM, some roms can't be flashed correctly with CWM.
In the recovery i try everything: cache,data,system wipe - factory reset (failed and reload everytime) - try via sideload to install a custom rom (loading the file to device but cannot install...)
Click to expand...
Click to collapse
If you wiped /system, then there is nothing to factory reset
What custom rom exactly?
After that i read more about the device and i want back to clean stock......
Click to expand...
Click to collapse
SO use to RUU method
but now the only working is fastboot mode to managed the device via PC.
Click to expand...
Click to collapse
normal, only fastboot from bootloader, and ADB from recovery or from booted OS.
One thing i wont to try was the install a nandroid backup via OTG cable....
Click to expand...
Click to collapse
but this works only in a recovery - right?
THis might be an option if you find a anandroid backup for your version.
but this works only in a recovery - right?
Click to expand...
Click to collapse
right, if you use a twrp nandroid, restore it using twrp. If you use a CWM nandroid, restore using CWM.
It would be nice to unlock the bootloader again so that i came back to recovery...but how?
The fastboot command " fastboot oem unlock" wont work...command error???!!!!!
Click to expand...
Click to collapse
fastboot oem unlock can't be used on your phone version, you must use HTCdev.com if you want to unlock the bootloader.
Have you finally checked MD5 value of your ruu?

Many many thanks for your detailed reply!!!!
The MD5 of the first RUU was okay.
It still does not work. Wrong imaging ....
Meanwhile, I have downloaded another: "RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.11.31.05_release_310878_signed".
I try to install but during the prozess comes a message: wrong bootloader........ grrrrrr
Now i will dowload your recommendation on post two today or tomorrow and give that a try....i hope this RUU work...

frischeis said:
Meanwhile, I have downloaded another: "RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.11.31.05_release_310878_signed".
I try to install but during the prozess comes a message: wrong bootloader........ grrrrrr
Click to expand...
Click to collapse
1.28.401.7 is a downgrade and you can't downgrade with S-ON, you must use a ruu same or higher version installed on your phone (1.29.401.10 +)

So,
i downloaded your recommendation:
"RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1"
and try to install but i get imaging error.
The phone shows the silver htc logo and aborted during pushing the files to the device with this imaging error message.....
MD5 matched!
Is this also the wrong RUU??
Somehow I can not get to the target Very disappointing ...
Any ideas?
I get the unlock code from htcdev.com.
Better work with unlocked device (recovery, sideload, nandroid backup option via OTG cable)???

I have solved the problem:
That's what I did:
Unlock the bootloader via htcdev.com.
Get the cwm recovery back .
Flash the current cwm recovery via fastboot (my recovery was a little bit outdated).
Flash via sideload cm11 Rom.
Device booting until the bootanimation :victory:
Back to recovery do all the wipe stuff.
And yes i have fully working device now :laugh:
Great!
But unfortunately I have not a RUU to get back to the factory defaults ....
But there are still a few RUU or nandroid backups that I can try ...

[Q] sense 6 OTA not working

Hello,
I have 4.4.2 installed on my One. I had rooted it with custom recovery. But as sense 6 is there I un-rooted it, locked it properly and removed tampered flag. Installed stock recovery and also put it in S-ON.
I can download OTA but while installing it is failing. It is showing red triangle and restarting it.
Can somebody help me to proceed further? If I go to HTC, will they update it?

I think , preload file is wiped when u unlocked ur device
Try installing ota manual and write the message

crazyboy4ever said:
I think , preload file is wiped when u unlocked ur device
Try installing ota manual and write the message
Click to expand...
Click to collapse
I am trying manually update it. But in recovery after red triangle it is restarting even after I press power and volume up button. So I am not reaching to recovery selection menu.

avcoolkarni said:
I am trying manually update it. But in recovery after red triangle it is restarting even after I press power and volume up button. So I am not reaching to recovery selection menu.
Click to expand...
Click to collapse
Did you flash the proper version of stock recovery? it Must be the same version as your phones currently installed OS.

mb_guy said:
Did you flash the proper version of stock recovery? it Must be the same version as your phones currently installed OS.
Click to expand...
Click to collapse
Yes, it is the same version. I have kitkat 4.4.2 India version. I got it from some other thread.

avcoolkarni said:
Can somebody help me to proceed further? If I go to HTC, will they update it?
Click to expand...
Click to collapse
Your problem is the current ROM is not 100% stock, some files are missing especially the preload.
1. What is your current software version no. ?
2. unlock the bootloader again and flash TWRP
3. flash a stock ROM.zip of your version no. or restore a proper nandroid backup
4. reboot and do the normal setup
5. reboot to bootloader
6. flash the stock recovery
7. reboot and do the OTA
So ... solve the no. 1 first.

ckpv5 said:
Your problem is the current ROM is not 100% stock, some files are missing especially the preload.
1. What is your current software version no. ?
2. unlock the bootloader again and flash TWRP
3. flash a stock ROM.zip of your version no. or restore a proper nandroid backup
4. reboot and do the normal setup
5. reboot to bootloader
6. flash the stock recovery
7. reboot and do the OTA
So ... solve the no. 1 first.
Click to expand...
Click to collapse
Hey,
My software version number is 4.20.707.7 with HBOOT 1.56. I don't have stock ROM readily available anywhere like htc1guru etc., so I am downloading it from one of the xda thread.
Now
I will install TWRP,
reset stock ROM (there is also an option of installin stock recovery) once my download finishes.
Then again will lock boot loader,
put S ON back
update sense 6 OTA.

avcoolkarni said:
Hey,
My software version number is 4.20.707.7 with HBOOT 1.56. I don't have stock ROM readily available anywhere like htc1guru etc., so I am downloading it from one of the xda thread.
Now
I will install TWRP,
reset stock ROM (there is also an option of installin stock recovery) once my download finishes.
Then again will lock boot loader,
put S ON back
update sense 6 OTA.
Click to expand...
Click to collapse
1. There is another file that you need to flash after that ROM zip.
See : http://forum.xda-developers.com/showpost.php?p=52981541&postcount=57
2. There is no need to lock boot loader and put S-On back (if now is S-Off) to do OTA update
Only stock recovery is needed

avcoolkarni said:
Then again will lock boot loader,
put S ON back
Click to expand...
Click to collapse
Really recommend you do NOT GO S-ON

ckpv5 said:
1. There is another file that you need to flash after that ROM zip.
See : http://forum.xda-developers.com/showpost.php?p=52981541&postcount=57
2. There is no need to lock boot loader and put S-On back (if now is S-Off) to do OTA update
Only stock recovery is needed
Click to expand...
Click to collapse
Thanks, I already downloaded that updater which contains twitter client. I will keep S OFF.

nkk71 said:
Really recommend you do NOT GO S-ON
Click to expand...
Click to collapse
Ok, will try that. Thanks

Stuck in boot loop and soft brick

My friend's phone is stuck in bootloop and I believe it's soft bricked.
It's a stock brand new HTC One M7.
It was updating one day and he said it might have got corrupted because it just shut down and when it booted back up it was stuck at the HTC Screen and wouldn't do anything.
Over the last week I have been trying to unbrick it.
It's LOCKED and S-ON Sprint HTC One M7.
I did a factory reset, wiped cache, dalvic cache, reboot. I tried putting in fastboot and flashing RUU on it but it kept failing because the RUU I had was a lower version of the image than the current one on the phone and I read online that I can only flash backwards if it's S-OFF.
Any help?
Thanks!

technocrat7 said:
My friend's phone is stuck in bootloop and I believe it's soft bricked.
It's a stock brand new HTC One M7.
It was updating one day and he said it might have got corrupted because it just shut down and when it booted back up it was stuck at the HTC Screen and wouldn't do anything.
Over the last week I have been trying to unbrick it.
It's LOCKED and S-ON Sprint HTC One M7.
I did a factory reset, wiped cache, dalvic cache, reboot. I tried putting in fastboot and flashing RUU on it but it kept failing because the RUU I had was a lower version of the image than the current one on the phone and I read online that I can only flash backwards if it's S-OFF.
Any help?
Thanks!
Click to expand...
Click to collapse
if the phone is new (never tampered with) and still under warranty, send it back for repair or replacement
s-off and run the ruu
unlock bootloader, flash a custom recovery and flash a rom or a nandroid backup
post in the sprint htc one forum for more detailed info

So the first step is S-OFF because I don't think k the warranty is on it.
And then custom recovery and what was the part with a custom nandroid backup? Can I run someone else's nandroid?
And if I put S-OFF on it, I can flash an older version of RUU right?
Sent from my HTC One_M8 using XDA Free mobile app

I'm pretty sure that in order to S-off you will need to be booted up first? The good news is that you can flash the full factory RUU with a s-on boot loader locked device so you may need to figure out how to do that first. Do you have an adb/fastboot environment set up? If so you are practically there. On a side note, I have seen no less than 3 m7s fail and softbrick on the first attempt at applying an ota, but it was always after S-off and a conversion to fully stock gpe (these were gsm models). I figured it was just because of the mods but who knows. Anyway, if you can locate and install a fully stock sprint RUU you should be back to where you were before the ota at which point you can proceed with whatever else you want to do.

technocrat7 said:
So the first step is S-OFF because I don't think k the warranty is on it.
And then custom recovery and what was the part with a custom nandroid backup? Can I run someone else's nandroid?
And if I put S-OFF on it, I can flash an older version of RUU right?
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
sorry for the confusion, this was not steps to follow (1-2-3-4) but either 1 or 2 or 3 or 4
if you go for option 2, yes you can flash older ruu.
for option 3, yes you can flash someone else nandroid, but it must be for your phone variant (sprint) and the ideal nandroid backup should be the same OS version.
---------- Post added at 02:34 PM ---------- Previous post was at 02:29 PM ----------
dougeedug said:
I'm pretty sure that in order to S-off you will need to be booted up first?
Click to expand...
Click to collapse
Right, you need a booted rom to s-off. (at least for the M7_UL dont know for the srpint variant)
The good news is that you can flash the full factory RUU with a s-on boot loader locked device so you may need to figure out how to do that first.
Click to expand...
Click to collapse
Not exactly, you can only flash ruu with a s-on device (and locked/relocked bootloader) if the ruu is same of higher version. In that case the OP need to find another ruu (if any available)

Yeah, I have a 4.2 image when loading RUU, therefore I'm not able to use an RUU.
So what else do I need to do?
And I do have an adb and fastboot environment set up, yes.
Should I instead just S-OFF It, put a custom bootloader on it and then flash a custom recovery?

Yes if you can achieve s-off you can put any RUU you want on it and that will rule out software issues.

Okay so I unlocked it.
However I looked online how to do S-OFF and all the articles I found said the phone has to be on an functional to enable USB debugging mode and to run the appropriate programs to make it S-OFF.
Is there any other way to do it?

Now that you are bootloader unlocked, flash a custom recovery and from there a rom. That should get you back to life so you can proceed however you wish.

I have a custom recovery.
TWRP 2.6.0.0 or something. And I loaded into it and my phone got stuck and the touch wouldn't work. It says "slide to unlock" and sliding doesn't work.
What do I do now? I can't even reboot the light keeps flashing and I even tried under a bright light and still nothing.
I'm letting the battery die to restart. When u do restart it, what do I do about the bad bootloader? Can I just put another one on there? I want Philz now after that terrible experience.

technocrat7 said:
I have a custom recovery.
TWRP 2.6.0.0 or something. .
Click to expand...
Click to collapse
This is very alarming! Be double sure you are flashing exactly what you need. The CWM you would need is 6.0.4.8 found on this page. I'm not sure what TWRP version is suitable as I don't use it. I don't dislike it. I have used it and it has worked.

Can I just do the same thing I did before to install a custom recovery?
Will it override the one I have currently?
Thanks!

technocrat7 said:
Can I just do the same thing I did before to install a custom recovery?
Will it override the one I have currently?
Thanks!
Click to expand...
Click to collapse
We will have to see what it does after you let it die. The way your phone is acting is not good. Unfortunately, we must keep in mind that it may be a hardware fault causing all of this from the start. If it will still charge offline, then you'll get a chance to see if you can power it up into the bootloader and get fastbootUSB.

technocrat7 said:
Can I just do the same thing I did before to install a custom recovery?
Will it override the one I have currently?
Thanks!
Click to expand...
Click to collapse
why are you waiting for it to die ? if you want to get out of recovery and tough isn't working, just hold down the power button and the volume down until the lights on the bottom flash 10 to 15 times, when it goes off, release the power button but continue to hold the volume down, you are now in the bootloader, or should be.
and yes, if you flash another recovery it will overwrite the one that's on there, unfortunately, most rom's require TWRP
---------- Post added at 03:28 AM ---------- Previous post was at 03:22 AM ----------
I also just noticed you have the Sprint M7, you cant use the normal recoveries or rom's, they wont work, you need to use the ones built for your phone, which is different to the normal gsm version.

I would try twrp 2.6.3.3 or this http://mdmower.cmphys.com/twrp-m7spr/ a newer custom compiled twrp so your os version dont get wiped on bootloader.

Dang, being with Sprint complicates things?
So will that one be safe to put on my phone? And that means I can't get Philz huh?

technocrat7 said:
Dang, being with Sprint complicates things?
So will that one be safe to put on my phone? And that means I can't get Philz huh?
Click to expand...
Click to collapse
No it doesn't complicate things, it's the same procedure, it's like with anything, you just have to make sure you get the right files. Your phone is cdma not gsm.
---------- Post added at 04:28 AM ---------- Previous post was at 04:17 AM ----------
http://forum.xda-developers.com/sprint-htc-one?nocache=1&z=1858146956656128
You can find all of those right files there

Okay thank you!
It is unlocked, rooted and had a custom recovery on it!
Now the last thing I need help with is, getting S-OFF because I still can't boot up the phone.
So now I just need to get S-OFF and then flash a custom ROM image on there and flash a custom image on it or something.
All I see when it boots up is the HTC screen.

technocrat7 said:
Okay thank you!
It is unlocked, rooted and had a custom recovery on it!
Now the last thing I need help with is, getting S-OFF because I still can't boot up the phone.
So now I just need to get S-OFF and then flash a custom ROM image on there and flash a custom image on it or something.
All I see when it boots up is the HTC screen.
Click to expand...
Click to collapse
You need a working Rom on it to go s-off, all s-off tools are run from an android booted phone, so download a Rom of your choice, in your case a sense Rom, make sure you get it from the link I supplied earlier for your particular phone, move it to the same folder where your adb and fastboot are on your computer, boot your phone into recovery (main screen only, no sub menus) and plug it into your computer, the type
adb push NAME_OF_ROM.zip /sdcard/
Takes a while so be patient, the command window will let you know when it's done.
Unplug your phone and in recovery select install, select your Rom from the list and follow the instructions

Seanie280672 said:
You need a working Rom on it to go s-off, all s-off tools are run from an android booted phone, so download a Rom of your choice, in your case a sense Rom, make sure you get it from the link I supplied earlier for your particular phone, move it to the same folder where your adb and fastboot are on your computer, boot your phone into recovery (main screen only, no sub menus) and plug it into your computer, the type
adb push NAME_OF_ROM.zip /sdcard/
Takes a while so be patient, the command window will let you know when it's done.
Unplug your phone and in recovery select install, select your Rom from the list and follow the instructions
Click to expand...
Click to collapse
So there's a slight problem.
"ADB Devices" doesn't show anything, it says "Devices not found"
The reason I would say is because it does not have USB Debugging enabled.
And I can't get into the phone to enable it because i'm not at that point yet.
Is there anything else I can do besides "adb push" to get the file on there?
Fastboot stuff works fine.
I went to the link you provided and found CynogenMod 11 I wanted to put on there.
After looking inside of the ZIP I downloaded there's a .img file inside called "boot.img" can I do anything with that?
Thanks!

Where did I go wrong?

Okay, so I have an HK m8 on sprint, FW 1.54.654.13.
I was originally on Viper 1.8.0, but wanted to upgrade to 2.0.0, so I went back to my stock backup, with the aforementioned software version.
After restoring that backup I realized I needed to also flash a stock recovery in order to take the OTA. So I flashed the 'Stock Recovery From 1.54.651.8 OTA' over adb from this thread: http://forum.xda-developers.com/showthread.php?t=2736048
So, since flashing that recovery my phone seems to not have a recovery anymore; infact, it constantly reboots after about 1 minute of being booted to system. When I boot into recovery, I get a symbol of a phone with an "!" in a triangle over it.
Where did I go wrong? What recovery should I be using? I can re-flash TWRP, but it seems I still get the bootloop, even though it does actually boot into system (which I've never seen happen from a bootloop). It's been like this for 12+ hours, and no amount of searching has helped me out thus far, so I'm hoping someone here could help me out a little.

xLoveHateLegend said:
Okay, so I have an HK m8 on sprint, FW 1.54.654.13.
I was originally on Viper 1.8.0, but wanted to upgrade to 2.0.0, so I went back to my stock backup, with the aforementioned software version.
After restoring that backup I realized I needed to also flash a stock recovery in order to take the OTA. So I flashed the 'Stock Recovery From 1.54.651.8 OTA' over adb from this thread: http://forum.xda-developers.com/showthread.php?t=2736048
So, since flashing that recovery my phone seems to not have a recovery anymore; infact, it constantly reboots after about 1 minute of being booted to system. When I boot into recovery, I get a symbol of a phone with an "!" in a triangle over it.
Where did I go wrong? What recovery should I be using? I can re-flash TWRP, but it seems I still get the bootloop, even though it does actually boot into system (which I've never seen happen from a bootloop). It's been like this for 12+ hours, and no amount of searching has helped me out thus far, so I'm hoping someone here could help me out a little.
Click to expand...
Click to collapse
When I boot into recovery, I get a symbol of a phone with an "!" in a triangle over it.
Click to expand...
Click to collapse
This is stock recovery
You could pull the stock recovery from the HK firmware...hopefully that will get you back to normal.
Worse comes to worse run the RUU.

I do not have the recovery.img in my backup. I'm also not S-off, so I think the only way I can upgrade my firmware is through OTA from what I understand, correct? If I could just flash the proper stock recovery I think I would be fine from there?

xLoveHateLegend said:
I do not have the recovery.img in my backup. I'm also not S-off, so I think the only way I can upgrade my firmware is through OTA from what I understand, correct? If I could just flash the proper stock recovery I think I would be fine from there?
Click to expand...
Click to collapse
You can flash the full firmware while being s-on.

Alright, thanks! Can I go ahead and RUU 2.22.401.4 directly, or should I just RUU to my current stock firmware and just OTA from there?
Sent from my 831C using XDA Free mobile app

xLoveHateLegend said:
Alright, thanks! Can I go ahead and RUU 2.22.401.4 directly, or should I just RUU to my current stock firmware and just OTA from there?
Sent from my 831C using XDA Free mobile app
Click to expand...
Click to collapse
2.22.401.4 is not for Sprint.
I would go with the current HK RUU and start fresh.

BD619 said:
2.22.401.4 is not for Sprint.
I would go with the current HK RUU and start fresh.
Click to expand...
Click to collapse
Damn. Alright, well from what I can see 2.16.654.4 is the latest for Sprint. After downloading O.M.J.'s RUU, would I be good to go straight to viper 2.0.0?
Sent from my 831C using XDA Free mobile app

xLoveHateLegend said:
Damn. Alright, well from what I can see 2.16.654.4 is the latest for Sprint. After downloading O.M.J.'s RUU, would I be good to go straight to viper 2.0.0?
Sent from my 831C using XDA Free mobile app
Click to expand...
Click to collapse
After you install TWRP recovery, yes.

For future reference Viper does OTA's which are not the same as Sprint OTA's...download the Viper OTA and flash in twrp.

Magnum_Enforcer said:
After you install TWRP recovery, yes.
Click to expand...
Click to collapse
Yes of course, thank you.
BD619 said:
For future reference Viper does OTA's which are not the same as Sprint OTA's...download the Viper OTA and flash in twrp.
Click to expand...
Click to collapse
Yes, I am aware. But on 1.8.0 I did not get an OTA. Maybe because I'll get it after I upgrade my FW. So after RUUing then reinstalling TWRP, if I restore my viper 1.8.0 backup, I can just OTA to 2.0.0?

xLoveHateLegend said:
Yes of course, thank you.
Yes, I am aware. But on 1.8.0 I did not get an OTA. Maybe because I'll get it after I upgrade my FW. So after RUUing then reinstalling TWRP, if I restore my viper 1.8.0 backup, I can just OTA to 2.0.0?
Click to expand...
Click to collapse
Should be able to...
But if you are going to RUU why not just download the full rom and clean flash.

BD619 said:
Should be able to...
But if you are going to RUU why not just download the full rom and clean flash.
Click to expand...
Click to collapse
I tried flashing the full Rom per your suggestion, but after flashing the 2.0.0 Rom, it's like my phone has no OS and can only boot to bootloader or recovery, not system at all.
I also tried extracting the latest hk ruu to the root of my external SD card and running it through bootloader to no avail.
I feel like I'm missing a vital part of information here. I've never really ruu'd before so I'm new to that but I'm pretty stumped on this whole thing.

xLoveHateLegend said:
I tried flashing the full Rom per your suggestion, but after flashing the 2.0.0 Rom, it's like my phone has no OS and can only boot to bootloader or recovery, not system at all.
I also tried extracting the latest hk ruu to the root of my external SD card and running it through bootloader to no avail.
I feel like I'm missing a vital part of information here. I've never really ruu'd before so I'm new to that but I'm pretty stumped on this whole thing.
Click to expand...
Click to collapse
get the drivers for your phone + adb, rename the firmware update to firmware.zip, put it in /sdk/platform-tools
put the phone in fastboot, make sure it says fastboot USB and type fastboot devices in terminal to confirm it's connected.
then type in terminal Fastboot oem rebootRUU (capitalization matters.)
your screen will go black with a greyish HTC logo, then type in fastboot flash zip firmware.zip
once it's done doing it's thing type fastboot reboot
this method is pretty much failproof
EDIT: also, if you're flashing ONLY the sprint 2.0.0 update, you'll have to be on capt's twrp 2.7.0.7, otherwise you'll have to flash the full rom, boot into it, reboot into 2.7.1.0, and dirty flash the sprint viper ROM. Hope that helps, cheers >;3

yorisou said:
get the drivers for your phone + adb, rename the firmware update to firmware.zip, put it in /sdk/platform-tools
put the phone in fastboot, make sure it says fastboot USB and type fastboot devices in terminal to confirm it's connected.
then type in terminal Fastboot oem rebootRUU (capitalization matters.)
your screen will go black with a greyish HTC logo, then type in fastboot flash zip firmware.zip
once it's done doing it's thing type fastboot reboot
this method is pretty much failproof
EDIT: also, if you're flashing ONLY the sprint 2.0.0 update, you'll have to be on capt's twrp 2.7.0.7, otherwise you'll have to flash the full rom, boot into it, reboot into 2.7.1.0, and dirty flash the sprint viper ROM. Hope that helps, cheers >;3
Click to expand...
Click to collapse
Thanks for the reply! From my understanding, you need to be S-Off for that method, which I am not.
The method I attempted to use is this one, from O.M.J's thread here http://forum.xda-developers.com/showthread.php?t=2729173
using 7zip, extract 0P6BIMG.zip to ext sd card
-boot into bootloader
-make sure*hboot*is highlighted, press power button
-it will scan your ext_sd card, then ask if you want to start the update
-press volume up & let it do it's thing...
The problem is, it scans my external SD card just fine but never asks if I want to start the update, nor do I get the option to press volume up etc... I am on captains twrp 2.7.0.7, as I've seen many other users confirm success with this recovery.
Also, I don't see just an update, it seems the Sprint version of the Rom I downloaded is the full rom. I actually did get it to boot once and got this (see screenshot), but it was a dirty flash.
Sent from my 831C using XDA Free mobile app

xLoveHateLegend said:
Thanks for the reply! From my understanding, you need to be S-Off for that method, which I am not.
The method I attempted to use is this one, from O.M.J's thread here http://forum.xda-developers.com/showthread.php?t=2729173
using 7zip, extract 0P6BIMG.zip to ext sd card
-boot into bootloader
-make sure*hboot*is highlighted, press power button
-it will scan your ext_sd card, then ask if you want to start the update
-press volume up & let it do it's thing...
The problem is, it scans my external SD card just fine but never asks if I want to start the update, nor do I get the option to press volume up etc... I am on captains twrp 2.7.0.7, as I've seen many other users confirm success with this recovery.
Also, I don't see just an update, it seems the Sprint version of the Rom I downloaded is the full rom. I actually did get it to boot once and got this (see screenshot), but it was a dirty flash.
Sent from my 831C using XDA Free mobile app
Click to expand...
Click to collapse
Did you re-lock your bootloader?

xLoveHateLegend said:
Thanks for the reply! From my understanding, you need to be S-Off for that method, which I am not.
The method I attempted to use is this one, from O.M.J's thread here http://forum.xda-developers.com/showthread.php?t=2729173
using 7zip, extract 0P6BIMG.zip to ext sd card
-boot into bootloader
-make sure*hboot*is highlighted, press power button
-it will scan your ext_sd card, then ask if you want to start the update
-press volume up & let it do it's thing...
The problem is, it scans my external SD card just fine but never asks if I want to start the update, nor do I get the option to press volume up etc... I am on captains twrp 2.7.0.7, as I've seen many other users confirm success with this recovery.
Also, I don't see just an update, it seems the Sprint version of the Rom I downloaded is the full rom. I actually did get it to boot once and got this (see screenshot), but it was a dirty flash.
Sent from my 831C using XDA Free mobile app
Click to expand...
Click to collapse
http://venomroms.com/htc-one-m8/
download the full one and the sprint one, flash the first, reboot all the way (doubt you have to finish the automatic setup) then reboot into recovery and dirty flash the sprint one without wiping anything. It'll connect to the CDMA network instead of the GSM one with no problems, you don't even need to be on 2.7.0.7
And if it isn't working in HBOOT just go into recovery and adb sideload it, you shouldn't need to be s-off to do that. Enter adb sideload and just type in a terminal adb sideload (filename)
EDIT: idk why but that picture made me lol irl, KEEP CALM AND KANG AWAY

Alright giving that a shot now, thanks
That message is hilarious to me now, but it wasn't at the time xD
Edit: is it safe to dirty flash the first one, coming from 1.8.0? Also no, I haven't relocked my boot loader.

xLoveHateLegend said:
Alright giving that a shot now, thanks
That message is hilarious to me now, but it wasn't at the time xD
Edit: is it safe to dirty flash the first one, coming from 1.8.0? Also no, I haven't relocked my boot loader.
Click to expand...
Click to collapse
RUU won't run unless you re-lock the bootloader since you are s-on

BD619 said:
RUU won't run unless you re-lock the bootloader since you are s-on
Click to expand...
Click to collapse
Ahhh, okay makes sense now. My m7 was s-off and that was the first and last time I ever did a RUU. If I re-lock the boot loader, do I have to go through htcdev again to unlock once more, or will having it locked again not effect root?
Sent from my 831C using XDA Free mobile app

xLoveHateLegend said:
Ahhh, okay makes sense now. My m7 was s-off and that was the first and last time I ever did a RUU. If I re-lock the boot loader, do I have to go through htcdev again to unlock once more, or will having it locked again not effect root?
Sent from my 831C using XDA Free mobile app
Click to expand...
Click to collapse
fastboot oem relock
should do it

[Q] Phone Freezes after updating to Sprint HTC One (M8) Software Update 4.25.651.14

I received a push notice to download and install Sprint HTC One (M8) Software Update 4.25.651.14 which was released on 4/9/15 with Wi-Fi Calling enhancements. My phone is rooted. I use Super SU Pro. I use TWRP (Sprint) for my custom recovery. Never had any problems with applying previous OTA updates. I connect via ADB shell and flash stock recovery for version 4.20.651.10 currently installed on my phone. I use One_M8_All-In-One_Kit_v2.0 to perform the shell commands.
I apply the OTA update in the stock recovery from my phone and everything looks good, but when the phone restarts it gets frozen in the white "splash" screen where it says "HTC One powered by Android". I waited over 15 minutes and nothing happened. I was able to recover my phone by booting into the bootloader and flashing TWRP then restoring my nandroid. I could see in the bootloader screen that the firmware was updated to the latest version.
Does anyone know what is causing the phone to freeze after the firmware is updated and the system restarts?
I tried to manually install the OTA zip file using TWRP from my phone to update the software. I selected the Zip file saved in the phone's root folder and used TWRP to apply the update, but got an error message that it "failed".
Does anyone know what steps are necessary to manually apply the OTA software update?

daodeltaforce said:
I received a push notice to download and install Sprint HTC One (M8) Software Update 4.25.651.14 which was released on 4/9/15 with Wi-Fi Calling enhancements. My phone is rooted. I use Super SU Pro. I use TWRP (Sprint) for my custom recovery. Never had any problems with applying previous OTA updates. I connect via ADB shell and flash stock recovery for version 4.20.651.10 currently installed on my phone. I use One_M8_All-In-One_Kit_v2.0 to perform the shell commands.
I apply the OTA update in the stock recovery from my phone and everything looks good, but when the phone restarts it gets frozen in the white "splash" screen where it says "HTC One powered by Android". I waited over 15 minutes and nothing happened. I was able to recover my phone by booting into the bootloader and flashing TWRP then restoring my nandroid. I could see in the bootloader screen that the firmware was updated to the latest version.
Does anyone know what is causing the phone to freeze after the firmware is updated and the system restarts?
I tried to manually install the OTA zip file using TWRP from my phone to update the software. I selected the Zip file saved in the phone's root folder and used TWRP to apply the update, but got an error message that it "failed".
Does anyone know what steps are necessary to manually apply the OTA software update?
Click to expand...
Click to collapse
You might wanna try posting this in the m8 thread. This is for the m7
sent from your moms house

janke438 said:
You might wanna try posting this in the m8 thread. This is for the m7
sent from your moms house
Click to expand...
Click to collapse
Um he stated it was the M8 update and this is the M8 Forum.

schmeggy929 said:
Um he stated it was the M8 update and this is the M8 Forum.
Click to expand...
Click to collapse
Lol my bad. Don't know why I ended up in this thread considering I never look outside of favorites. Disregaurd my previous post .
sent from your moms house

daodeltaforce said:
I received a push notice to download and install Sprint HTC One (M8) Software Update 4.25.651.14 which was released on 4/9/15 with Wi-Fi Calling enhancements. My phone is rooted. I use Super SU Pro. I use TWRP (Sprint) for my custom recovery. Never had any problems with applying previous OTA updates. I connect via ADB shell and flash stock recovery for version 4.20.651.10 currently installed on my phone. I use One_M8_All-In-One_Kit_v2.0 to perform the shell commands.
I apply the OTA update in the stock recovery from my phone and everything looks good, but when the phone restarts it gets frozen in the white "splash" screen where it says "HTC One powered by Android". I waited over 15 minutes and nothing happened. I was able to recover my phone by booting into the bootloader and flashing TWRP then restoring my nandroid. I could see in the bootloader screen that the firmware was updated to the latest version.
Does anyone know what is causing the phone to freeze after the firmware is updated and the system restarts?
I tried to manually install the OTA zip file using TWRP from my phone to update the software. I selected the Zip file saved in the phone's root folder and used TWRP to apply the update, but got an error message that it "failed".
Does anyone know what steps are necessary to manually apply the OTA software update?
Click to expand...
Click to collapse
I believe it is is still true that you cant OTA with a unlocked bootloader regardless if you reinstall the stock recovery. You need to relock bootloader install stock recovery. It is much safer and easier to wait until there is a flashable firmware upgrade. The OTA did not install correctly hence the white splash screen.
Look here and READ carefully and install the right zip.
---------- Post added at 10:10 PM ---------- Previous post was at 10:07 PM ----------
janke438 said:
Lol my bad. Don't know why I ended up in this thread considering I never look outside of favorites. Disregaurd my previous post .
sent from your moms house
Click to expand...
Click to collapse
Haha I was like WTH? I had to look twice to make sure I wasn't in the M7 forum.

schmeggy929 said:
Um he stated it was the M8 update and this is the M8 Forum.
Click to expand...
Click to collapse
janke438 said:
Lol my bad. Don't know why I ended up in this thread considering I never look outside of favorites. Disregaurd my previous post .
sent from your moms house
Click to expand...
Click to collapse
Guess I should have noted I move it

flash the recovery from the ota.zip in fastboot then rename the ota to update.zip and manually install it from the stock recovery. also "fastboot erase cache" before booting your phone. Btw if you are using xposed(or any scripts) it can cause problems, reinstall any mods after first booting the phone.

daodeltaforce said:
I received a push notice to download and install Sprint HTC One (M8) Software Update 4.25.651.14 which was released on 4/9/15 with Wi-Fi Calling enhancements. My phone is rooted. I use Super SU Pro. I use TWRP (Sprint) for my custom recovery. Never had any problems with applying previous OTA updates. I connect via ADB shell and flash stock recovery for version 4.20.651.10 currently installed on my phone. I use One_M8_All-In-One_Kit_v2.0 to perform the shell commands.
I apply the OTA update in the stock recovery from my phone and everything looks good, but when the phone restarts it gets frozen in the white "splash" screen where it says "HTC One powered by Android". I waited over 15 minutes and nothing happened. I was able to recover my phone by booting into the bootloader and flashing TWRP then restoring my nandroid. I could see in the bootloader screen that the firmware was updated to the latest version.
Does anyone know what is causing the phone to freeze after the firmware is updated and the system restarts?
I tried to manually install the OTA zip file using TWRP from my phone to update the software. I selected the Zip file saved in the phone's root folder and used TWRP to apply the update, but got an error message that it "failed".
Does anyone know what steps are necessary to manually apply the OTA software update?
Click to expand...
Click to collapse
I'm assuming you're s-on? From what I know if you have a system file that has been modified, the OTA won't work, you have to have a stock non-rooted ROM if you're going to take the OTA.
Check out this link http://forum.xda-developers.com/showthread.php?t=2729173 if you're s-on relock your bootloader first.
Hope this helps, good luck!

OTA.zip
Vcek said:
flash the recovery from the ota.zip in fastboot then rename the ota to update.zip and manually install it from the stock recovery. also "fastboot erase cache" before booting your phone. Btw if you are using xposed(or any scripts) it can cause problems, reinstall any mods after first booting the phone.
Click to expand...
Click to collapse
Thank you Vcek. It sounds like I need to do these steps while tethered to my PC in the ADB shell? I will try this method. Maybe one of my mistakes was I did not use the stock recovery from the latest OTA.zip. I had used the previous version OTA.zip's stock recovery to perform the software update installation from my phone.
Some people say I need to RELOCK the bootloader but I have never needed to do this to perform any of the previous OTA.zip updates. In fact, updating my rooted phone has been very easy until I ran into this problem with the latest OTA.zip update. I simply flashed the previous OTA.zip stock recovery tethered to my PC in ADB shell, then ran the latest OTA.zip update saved to my phone's internal storage while my phone remained rooted. Of course, after the OTA.zip was installed, I had to run SuperSU.zip in TWRP recovery from my phone to re-root the phone. Everything was always perfect after those steps.
I don't want to RELOCK my bootloader because then my phone internal storage will be wiped. I am trying to keep my phone from returning to a factory fresh installation. Perhaps there's a step in between that I am missing to restore the phone's apps and data but when I use TWRP to restore my nandroid, the previous OS is restored too.

Tried with stock recovery from OTA
daodeltaforce said:
Thank you Vcek. It sounds like I need to do these steps while tethered to my PC in the ADB shell? I will try this method. Maybe one of my mistakes was I did not use the stock recovery from the latest OTA.zip. I had used the previous version OTA.zip's stock recovery to perform the software update installation from my phone.
Some people say I need to RELOCK the bootloader but I have never needed to do this to perform any of the previous OTA.zip updates. In fact, updating my rooted phone has been very easy until I ran into this problem with the latest OTA.zip update. I simply flashed the previous OTA.zip stock recovery tethered to my PC in ADB shell, then ran the latest OTA.zip update saved to my phone's internal storage while my phone remained rooted. Of course, after the OTA.zip was installed, I had to run SuperSU.zip in TWRP recovery from my phone to re-root the phone. Everything was always perfect after those steps.
I don't want to RELOCK my bootloader because then my phone internal storage will be wiped. I am trying to keep my phone from returning to a factory fresh installation. Perhaps there's a step in between that I am missing to restore the phone's apps and data but when I use TWRP to restore my nandroid, the previous OS is restored too.
Click to expand...
Click to collapse
daodeltaforce I am facing similar issue with the current OTA update. I tried keeping it for almost half and hour in frozen mode still it did not boot. Even I have tried with stock recovery from OTA but no help.

Sprint HTC One (M8) 4.25.651.14
mukeshdaiv said:
daodeltaforce I am facing similar issue with the current OTA update. I tried keeping it for almost half and hour in frozen mode still it did not boot. Even I have tried with stock recovery from OTA but no help.
Click to expand...
Click to collapse
mukeshdaiv thanks for reporting your similar problem with this latest OTA.zip update. I think our solution to this problem is to manually install the update from the ADB shell tethered to a PC to run the commands to override the phone's recovery. If your phone is still frozen just press the power button while pressing the volume down button to get into the bootloader, then tether your phone to your PC and run the ADB to flash TWRP or other custom recovery and then restore your nandroid. After that, you will see that your phone's firmware was updated to the latest version. So all that's left to do is to update your phone's OS. That's the part I am not sure how to do in ADB.

daodeltaforce said:
mukeshdaiv thanks for reporting your similar problem with this latest OTA.zip update. I think our solution to this problem is to manually install the update from the ADB shell tethered to a PC to run the commands to override the phone's recovery. If your phone is still frozen just press the power button while pressing the volume down button to get into the bootloader, then tether your phone to your PC and run the ADB to flash TWRP or other custom recovery and then restore your nandroid. After that, you will see that your phone's firmware was updated to the latest version. So all that's left to do is to update your phone's OS. That's the part I am not sure how to do in ADB.
Click to expand...
Click to collapse
You don't use ADB-you use a RUU (ROM Update Utility), which is a exe file run from your computer. The RUU includes both software and firmware, as well as the stock recovery.

RUU
Magnum_Enforcer said:
You don't use ADB-you use a RUU (ROM Update Utility), which is a exe file run from your computer. The RUU includes both software and firmware, as well as the stock recovery.
Click to expand...
Click to collapse
Thank you Magnum_Enforcer. I knew a little bit about RUU but never used it to update my phone before. I will try to find the ROM Update Utility for Sprint HTC One (M8) software update number 4.25.651.14. Thank you.

daodeltaforce said:
Thank you Magnum_Enforcer. I knew a little bit about RUU but never used it to update my phone before. I will try to find the ROM Update Utility for Sprint HTC One (M8) software update number 4.25.651.14. Thank you.
Click to expand...
Click to collapse
Look in the first post in the thread linked below:
http://forum.xda-developers.com/showthread.php?t=2729173

Magnum_Enforcer said:
Look in the first post in the thread linked below:
http://forum.xda-developers.com/showthread.php?t=2729173
Click to expand...
Click to collapse
Thanks again Magnum_Enforcer! I see OMJ's post with a variety of RUU's. It looks like mine is the first one listed. So these RUU's have both the firmware and the software? Do I need to S-Off first before I execute the RUU? If so, I've got some notes how to do that in the ADB shell. Thank you!

daodeltaforce said:
Thanks again Magnum_Enforcer! I see OMJ's post with a variety of RUU's. It looks like mine is the first one listed. So these RUU's have both the firmware and the software? Do I need to S-Off first before I execute the RUU? If so, I've got some notes how to do that in the ADB shell. Thank you!
Click to expand...
Click to collapse
S-off is not required. You'll need to relock your bootloader using the command fastboot oem lock. Then double-click the RUU to start the installer. Once it starts simply follow the prompts on your computer to complete the process. For more info hit the second link in my sig and scroll down & read the RUU section.

Magnum_Enforcer said:
S-off is not required. You'll need to relock your bootloader using the command fastboot oem lock. Then double-click the RUU to start the installer. Once it starts simply follow the prompts on your computer to complete the process. For more info hit the second link in my sig and scroll down & read the RUU section.
Click to expand...
Click to collapse
Magnum_Enforcer thanks very much for your guidance, I really appreciate it. Relocking the bootloader and then unlocking it (so I can re-root my phone) will wipe my phones internal memory, right? How do I restore my Apps & Data with my nandroid since it will restore the previous OS. Then I would have only updated the firmware and the latest OS would be replaced by the nandroid, right? Or am I missing a step? I'll read up on your RUU instructions and do some searching. Thank you!

Searching to flash via ADB
daodeltaforce said:
mukeshdaiv thanks for reporting your similar problem with this latest OTA.zip update. I think our solution to this problem is to manually install the update from the ADB shell tethered to a PC to run the commands to override the phone's recovery. If your phone is still frozen just press the power button while pressing the volume down button to get into the bootloader, then tether your phone to your PC and run the ADB to flash TWRP or other custom recovery and then restore your nandroid. After that, you will see that your phone's firmware was updated to the latest version. So all that's left to do is to update your phone's OS. That's the part I am not sure how to do in ADB.
Click to expand...
Click to collapse
daodeltaforce I have already flashed recovered from nadroid backup. Thanks for the information. Hope we can flash via ADB. As relocking and unlocking bootloader will clear all the memory.

mukeshdaiv said:
daodeltaforce I have already flashed recovered from nadroid backup. Thanks for the information. Hope we can flash via ADB. As relocking and unlocking bootloader will clear all the memory.
Click to expand...
Click to collapse
mukeshdaiv I am glad you were able to restore your Nandroid. Now we need to figure out how to apply the latest OTA.zip for our UNLOCKED (rooted) phones without losing our Apps and Data. I was informed in this forum that we need to run the RUU.exe that OMJ has posted. I asked OMJ to confirm that the RUU.exe will also update the OS (not just the firmware). AND that it can be installed without losing my Apps & Data. I've been told in this forum the bootloader needs to be RELOCKED. That means to UNLOCK the bootloader to ROOT the phone will wipe the phone's internal storage. I will not do that. There is no way I am going lose my Apps and Data to update the OS. I for one will not start from scratch. I have not received a reply from OMJ. I also asked Captain_Throwback the same question if there is a way to apply the RUU.exe, update the firmware and OS without having to wipe my Apps & Data. I have not received a reply from Captain_Throwback. At this point, I think I will need to move to more resources to get some help and answers. I wish you good luck and if you find a solution that works for your phone, please post it here, and I will do the same. Thanks!

i'm having the same problem where y phone is stuck at the white htc one screen as you, and haven't been able to get it to restart from there. i restored the stock recovery and started the ota and it looked to install right but i'm stuck where you mentioned. i think maybe i forgot to relock the bootloader? anyway, i've tried holding the power button and everything and i still can't get anywhere. any help would be greatly appreciated.
edit: i was able to get into the bootloader, and after rebooting it just stays at a black screen right after the first powerup screen. dunno where to go from there though.