[Q] Boot image EMUI 2.3 request - Huawei Ascend P7

I was on My-RoM v1.2 EMUI 2.3 and wanted to upgrade.
I flashed boot image BOOT_EMUI3.0_609. Now my phone is in a bootloop.
I think the fastest way to correct this would be to flash kernel fastboot image for 2.3. It is listed in this thread, but the link is dead:
http://forum.xda-developers.com/asc...ds-tweaks-kernels-recoverys-emui-2-3-t2966670
I can boot into fastboot mode, but nothing else. Any help would be appreciated.

harlekein said:
I was on My-RoM v1.2 EMUI 2.3 and wanted to upgrade.
I flashed boot image BOOT_EMUI3.0_609. Now my phone is in a bootloop.
I think the fastest way to correct this would be to flash kernel fastboot image for 2.3. It is listed in this thread, but the link is dead:
http://forum.xda-developers.com/asc...ds-tweaks-kernels-recoverys-emui-2-3-t2966670
I can boot into fastboot mode, but nothing else. Any help would be appreciated.
Click to expand...
Click to collapse
On which firmware you was on Emui 2.3?B.133,B.135..etc

Honestly, I'm not sure. I got the phone new yesterday and followed the steps form here:
http://forum.xda-developers.com/ascend-p7/development/rom-myrom-v1-0-emui-2-3-4-4-2-b135-t2948887
I now managed to flash TWRP recovery again. So that's something. But not sure how to proceed from here.

I managed to get into TWRP and followed the same steps again. I am now again in 2.3 and will leave it at that. Thank you for your response.

Related

[Q] I am in need of a ton of help

So I rooted my verizon g2 and had a couple different roms flashed when I went to go flash cm11. When I did this I got stuck in a bootloop so I tried going into download mode to start all over again and I have no download mode anymore it goes right to fastboot. So I tried a couple suggestions of flashing recoveries and things from fastboot now knowmatter what I do the phone boots into fastboot I need help please. I appreciate any type of help that I get.
xibt said:
So I rooted my verizon g2 and had a couple different roms flashed when I went to go flash cm11. When I did this I got stuck in a bootloop so I tried going into download mode to start all over again and I have no download mode anymore it goes right to fastboot. So I tried a couple suggestions of flashing recoveries and things from fastboot now knowmatter what I do the phone boots into fastboot I need help please. I appreciate any type of help that I get.
Click to expand...
Click to collapse
Let me guess, you installed xdaddeb's boot stack at some point. Get the download mode restore from his link, it's in my signature. Flash that in recovery.
Also don't flash the CM11 nightlies, they are built from JB drivers/kernel for the G2 and won't work with the KK basebands...
mjones73 said:
Let me guess, you installed xdaddeb's boot stack at some point. Get the download mode restore from his link, it's in my signature. Flash that in recovery.
Also don't flash the CM11 nightlies, they are built from JB drivers/kernel for the G2 and won't work with the KK basebands...
Click to expand...
Click to collapse
I believe I did flash that at some point. The only problem with that solution is I have no recovery I only have fastboot that is the only thing it will boot into knowmatter what I do.
xibt said:
I believe I did flash that at some point. The only problem with that solution is I have no recovery I only have fastboot that is the only thing it will boot into knowmatter what I do.
Click to expand...
Click to collapse
You have Fastboot? Did you try downloading the latest TWRP img file and doing a fastboot boot recovery.img or fastboot flash recovery recovery.img? (I really don't know if it will work)
Download http://dansroms.com/G2-TWRP/custom-twrp-2.8.0.1-vs980.zip and extract the recovery.img from that and use it.
acejavelin said:
You have Fastboot? Did you try downloading the latest TWRP img file and doing a fastboot boot recovery.img or fastboot flash recovery recovery.img? (I really don't know if it will work)
Sorry I should have updated sooner I got it to work I needed to find the correct .laf file for the phone flashed it from fastboot and got download mode back then recovered from there. Thank you for your help I really appreciate it.
Click to expand...
Click to collapse

Stuck on htc boot image after oem rebootRUU flash rom

hello.
since last week I blocked my memul I did some more search and followed the following howto:http://forum.xda-developers.com/showthread.php?p=64018011#post64018011
And used the firmware from here: http://forum.xda-developers.com/one-mini-2/general/stock-ruu-rom-recovry-htc-one-mini-2-t3250020
At the end, my phone is blocked again.. I certainly did something wrong, but I don't know what.
I've followed the guide and flashed the sock firmware for my phone but now when it boot up, I'm stuck on the boot screen (HTC , powered by android - attached image1.jpg) and nothing append. If I try power+vol down it take a screenshot (attached - image2.png).
I managed to flash back the TWRP but my backup are gone. I've a copy on my computer, but I don't know how to restore my phone.
What's the best option? flash a new rom or restore my backup? Either way, how I do that?
Thanks for your answer,
ciao
Problem solved. I managed to flash a CM rom through the adb sideload in the TWRP recovery!
deleric said:
Problem solved. I managed to flash a CM rom through the adb sideload in the TWRP recovery!
Click to expand...
Click to collapse
I am back to stock rom can you help me ?

I was on 6.0 on XT 1095. Please help me flash this stock ROM to get out of bootloop

Hi,
I was on 6.0 on XT1095. Tried to root it. Screwed up by flashing something that didn't work. Now i am stuck on 'warning bootloader unlocked' screen. Previously when I was on 5.1 I restored my phone from bootloop by using official images from Moto and using their instructions. Now there are no 6.0 images. I guess trying to reflash the whole 5.1 ijmages would brick my phone. I tried flashing just the system image of 5.1. It didn't work.
I found this 6.0 stock ROM here on XDA http://forum.xda-developers.com/moto-x-2014/development/rom-xt1095-flashable-stock-rom-t3277874 . How do I flash this?
Please help. I'm on stock recovery. Previously I ran commands like 'fastboot flash system x.img' and so on when phone was in fastboot mode. How to flash this zip now.
Thanks in advance.
A bootloop is simple to get out of. Just press and hold the power and volume down keys to boot into recovery and go from there. If your phone isn't booting past the unlocked bootloader warning splash then you need to elaborate on WTF you flashed. Just saying "something that didn't work" isn't sufficient to make an accurate diagnosis.
To flash that stock ROM you posted a link to above would require you to fastboot flash a custom recovery first.
As for restoring a 5.1 image I don't understand why you'd think that would brick your device. You're formatting the entire device by going back to ANY stock image. Just because you are on 6.0 doesn't mean you have to restore a 6.0 stock image (that probably won't be available for some time).
sent from my moto x™

White LED instead of recovery

Ok, so lets start from the beginning.
I have a OnePlus 3t and I have been trying for the whole day to get multirom up and running.
Made a couple of mistakes in the beginning (nothing serious) although i decided to use the unbrick tool to fully clean it.
After successfully cleaning it I booted, skipped thru the setup, went to developer settings, enabled oem unlocking and verified the computer signature.
Went to fastboot mode unlocked oem, and flashed TWRP like this:
Code:
fastboot flash recovery TWRP.img
fastboot boot TWRP.img
It all went well, then in twrp I copied a backup from my pc (that I made previously) and restored it.
And here comes the actual problem. Whenever I try to boot into TWRP it is just a black screen and a the LED is white.
Only way to boot into TWRP is by typing
Code:
fastboot boot TWRP.img
while in fastboot
Does anyone have a clue on this one?
(Sorry if grammar isn't perfect)
TheGamer14 said:
Ok, so lets start from the beginning.
I have a OnePlus 3t and I have been trying for the whole day to get multirom up and running.
Made a couple of mistakes in the beginning (nothing serious) although i decided to use the unbrick tool to fully clean it.
After successfully cleaning it I booted, skipped thru the setup, went to developer settings, enabled oem unlocking and verified the computer signature.
Went to fastboot mode unlocked oem, and flashed TWRP like this:
Code:
fastboot flash recovery TWRP.img
fastboot boot TWRP.img
It all went well, then in twrp I copied a backup from my pc (that I made previously) and restored it.
And here comes the actual problem. Whenever I try to boot into TWRP it is just a black screen and a the LED is white.
Only way to boot into TWRP is by typing
Code:
fastboot boot TWRP.img
while in fastboot
Does anyone have a clue on this one?
(Sorry if grammar isn't perfect)
Click to expand...
Click to collapse
Update: Just booted into recovery by using
Code:
fastboot boot TWRP.img
and now I'm unauthorized in adb
The unbrick tool flashes an old firmware that won't start twrp. You need to update the firmware to a newer version. Try this firmware zip and report please:
http://forum.xda-developers.com/showpost.php?p=70145090&postcount=41
sniperle said:
The unbrick tool flashes an old firmware that won't start twrp. You need to update the firmware to a newer version. Try this firmware zip and report please:
http://forum.xda-developers.com/showpost.php?p=70145090&postcount=41
Click to expand...
Click to collapse
Downloading and trying rn
sniperle said:
The unbrick tool flashes an old firmware that won't start twrp. You need to update the firmware to a newer version. Try this firmware zip and report please:
http://forum.xda-developers.com/showpost.php?p=70145090&postcount=41
Click to expand...
Click to collapse
I somehow made everything even worse so using the unbrick kit again.
Should I OTA update when in system?
Just tried doing a OTA and while it was rebooting it WIPED the data by some reason.
So now it is basically a clean install that needs a OTA that probably will wipe it again...
Ok just tried it again and it seems to actually update. Gonna report back soon
TheGamer14 said:
Just tried doing a OTA and while it was rebooting it WIPED the data by some reason.
So now it is basically a clean install that needs a OTA that probably will wipe it again...
Click to expand...
Click to collapse
So it seems like if you try to update while having a pc attached wipes the data?
This is really weird
sniperle said:
The unbrick tool flashes an old firmware that won't start twrp. You need to update the firmware to a newer version. Try this firmware zip and report please:
http://forum.xda-developers.com/showpost.php?p=70145090&postcount=41
Click to expand...
Click to collapse
YESSS I'm finally able to boot into twrp TNX SO MUCH
Glad to hear you aced this. Just for further explansion:
The OS update does a firmware update too.
I took the firmware from the 3.5.4 flash zip from oneplus.

Stuck In Fastboot Mode

I was on stock 12.1 (rooted, bootloader unlocked) and wanted to try out this ROM e/OS.
Went through the first step of flashing the recovery, after which it is now stuck in Fastboot mode.
I did try to boot into TWRP to install a ROM or do a factory wipe via Fastboot but any command just takes me back to Fastboot.
Any ideas on how to fix this?
Thanks.
bluegrass55 said:
I was on stock 12.1 (rooted, bootloader unlocked) and wanted to try out this ROM e/OS.
Went through the first step of flashing the recovery, after which it is now stuck in Fastboot mode.
I did try to boot into TWRP to install a ROM or do a factory wipe via Fastboot but any command just takes me back to Fastboot.
Any ideas on how to fix this?
Thanks.
Click to expand...
Click to collapse
What happens when you try to boot TWRP?
Is there an error message at the bottom of the bootloader screen?
V0latyle said:
What happens when you try to boot TWRP?
Is there an error message at the bottom of the bootloader screen?
Click to expand...
Click to collapse
It returns back to fastboot.
Just noticed the error message "error boot prepare"
bluegrass55 said:
It returns back to fastboot.
Just noticed the error message "error boot prepare"
Click to expand...
Click to collapse
Ah, this usually happens when you are trying to use a custom ROM with the stock boot image. Extract the boot image from the ROM you're trying to install then flash it to /boot.
Otherwise, use a GSI.
V0latyle said:
Ah, this usually happens when you are trying to use a custom ROM with the stock boot image. Extract the boot image from the ROM you're trying to install then flash it to /boot.
Otherwise, use a GSI.
Click to expand...
Click to collapse
Thanks for the quick reply.
I'll try flashing the custom ROM boot image first. By GSI do you mean the stock boot image?
bluegrass55 said:
Thanks for the quick reply.
I'll try flashing the custom ROM boot image first. By GSI do you mean the stock boot image?
Click to expand...
Click to collapse
Managed to sort it out from the instructions on this website to unbrick Pixel4.
Restore Pixel 4/XL/4a to Stock Firmware via Fastboot | Unbrick it
In this tutorial, we will show you how to restore Pixel 4, 4 XL, and 4a to Stock Firmware via Fastboot Commands and then unbrick it.
satus.keystoneuniformcap.com
bluegrass55 said:
Thanks for the quick reply.
I'll try flashing the custom ROM boot image first. By GSI do you mean the stock boot image?
Click to expand...
Click to collapse
No, Generic System Image. May not be available for the custom ROM you're trying to use.
bluegrass55 said:
Flashing stock boot didn't work.
I hadn't flashed the custom ROM. Just the custom ROM recovery, with which you install the ROM.
Click to expand...
Click to collapse
I would suggest asking in the ROM thread, but make sure you read back as the question may have been answered before.
To get your device working for now, just flash back to stock

Categories

Resources