Database Develop

[Q] please help me restore my One

Good day all
I have been running CM 10.2 on my One for some months. Recently its started playing up so ive decided to go back to stock.
Ive googled the process. Fastboot works OK and see's my One connected OK.
Im having issues figuring out what RUU I should be downloading. Initially I went for RUU_M7_U_JB_50_HTC_Europe_1.29.401.2
After a number of minutes it failed and said something like it cannot use this on my phone. My phone is a UK purchased unlocked device. Can anyone point me at the correct RUUI should download?

Looking at the fastboot screen I can see that my OS is 2.24.401.8
hboot is 1.54.0000
Please, any pointers to get a stock OS installed and my device booting again.

phupton said:
Looking at the fastboot screen I can see that my OS is 2.24.401.8
hboot is 1.54.0000
Please, any pointers to get a stock OS installed and my device booting again.
Click to expand...
Click to collapse
you won't get much help till you post your fastboot getvar all results
minus your serial no and IEMI

clsA said:
you won't get much help till you post your fastboot getvar all results
minus your serial no and IEMI
Click to expand...
Click to collapse
Thanks for the starter...
form-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 00000000000
(bootloader) imei: 0000000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4103mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s

phupton said:
Thanks for the starter...
form-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
finished. total time: 0.080s
Click to expand...
Click to collapse
You can flash this (compatible with your firmware, CID & MID): http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-8-zip/
if you want to receive OTAs, you'll need to select "stock recovery" (which will overwrite custom recovery).

nkk71 said:
You can flash this (compatible with your firmware, CID & MID): http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-8-zip/
if you want to receive OTAs, you'll need to select "stock recovery" (which will overwrite custom recovery).
Click to expand...
Click to collapse
Happy to go totally stock. Ive unlocked my bootloader again this morning. How would I flash the zip file you have directed me to download. Apologies for my newbie/dangerous ignorance...

phupton said:
Happy to go totally stock. Ive unlocked my bootloader again this morning. How would I flash the zip file you have directed me to download. Apologies for my newbie/dangerous ignorance...
Click to expand...
Click to collapse
by flashing it in custom recovery (CWM or TWRP), just like any custom ROM.

nkk71 said:
by flashing it in custom recovery (CWM or TWRP), just like any custom ROM.
Click to expand...
Click to collapse
My phone will only boot to fastboot at the moment. ITs partially bricked. Any pointers on how to get CWM installed?

phupton said:
My phone will only boot to fastboot at the moment. ITs partially bricked. Any pointers on how to get CWM installed?
Click to expand...
Click to collapse
If you have unlocked bootloaders then download twrp or cwm and rename to recovery put the file in the fastboot folder.
Then type fastboot flash recovery recovery.img
this will flash the custom recovery.
http://forum.xda-developers.com/showthread.php?t=2173863 - CWM
http://forum.xda-developers.com/showthread.php?t=2247900 - TWRP

khandelwalsiddharth said:
If you have unlocked bootloaders then download twrp or cwm and rename to recovery put the file in the fastboot folder.
Then type fastboot flash recovery recovery.img
this will flash the custom recovery.
http://forum.xda-developers.com/showthread.php?t=2173863 - CWM
http://forum.xda-developers.com/showthread.php?t=2247900 - TWRP
Click to expand...
Click to collapse
Thanks. I should be able to get a custom recovery sorted pretty quick. Can you just give me a bit of a pointer on the flashing of the stock rom mentioned earleir

phupton said:
Looking at the fastboot screen I can see that my OS is 2.24.401.8
hboot is 1.54.0000
Please, any pointers to get a stock OS installed and my device booting again.
Click to expand...
Click to collapse
bro hboot 1.54 isn't supported for RUU. u have 2 downgrade 2 hboot 1.44 to use the RUU. follow nkk71's post on returning to stock

phupton said:
Thanks. I should be able to get a custom recovery sorted pretty quick. Can you just give me a bit of a pointer on the flashing of the stock rom mentioned earleir
Click to expand...
Click to collapse
Do one thing install a custom rom like ARHD etc. and then S-off your phone using rumrunner.

This is going to be one of those jobs that just fails and all I end up with is a bricked phone.
I am a mac user and was using a windows XP VM to communicate with me phone using fast boot... When I try to push a recovery image XP fails badly and reboots...
I can't boot camp my mac because I'm running without a CD drive and boot camp needs a CD drive before installation.
Any tips on how to get my phone sorted using a mac?

phupton said:
This is going to be one of those jobs that just fails and all I end up with is a bricked phone.
I am a mac user and was using a windows XP VM to communicate with me phone using fast boot... When I try to push a recovery image XP fails badly and reboots...
I can't boot camp my mac because I'm running without a CD drive and boot camp needs a CD drive before installation.
Any tips on how to get my phone sorted using a mac?
Click to expand...
Click to collapse
1- just use mac versions of fastboot & adb, i believe you can find them here: http://forum.xda-developers.com/showthread.php?t=2365506
(or google for them)
2- do you care about having your phone "out-of-the-box"? that entails much more work.Can you live with an UNLOCKED or RELOCKED bootloader, and possibly the TAMPERED sign?
3- if you don't care about ^^ (2), then just use the Guru Reset ROM, i linked before.
get adb and fastboot working on mac, then in bootloader/FASTBOOT USB:
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
-> enter recovery
adb push <name of guru>.zip /data/media/0/
then in recovery choose "install" and select the Guru Reset ROM.

Ok so i reloaded the recovery image. Rebooted and hey presto Cyanogenmod 10.2 loaded again. Phone is now working BUT I would still like to go back to stock.
With that in mind I followed your instructions above and tried to load the Guru zip on to the SDCARD. The ADB process finishes and it says its copied the file over but I can never seem to find it whe i load the recovery and try to install from a zip file.
Questions. Am I right in thinking I can continue to load the Guru zip to attempt to get back to stock?
What am i doing wrong?

phupton said:
Ok so i reloaded the recovery image. Rebooted and hey presto Cyanogenmod 10.2 loaded again. Phone is now working BUT I would still like to go back to stock.
With that in mind I followed your instructions above and tried to load the Guru zip on to the SDCARD. The ADB process finishes and it says its copied the file over but I can never seem to find it whe i load the recovery and try to install from a zip file.
Questions. Am I right in thinking I can continue to load the Guru zip to attempt to get back to stock?
What am i doing wrong?
Click to expand...
Click to collapse
if your phone is booting up again
just copy the guru.zip to the phone storage from your mac
no need to "push" if your phone is booting up

To confirm, I am now copying the zip over.
Is there a chance of me bricking the phone again or will the Guru zip return the phone to stock and allow OTA updates?

phupton said:
To confirm, I am now copying the zip over.
Is there a chance of me bricking the phone again or will the Guru zip return the phone to stock and allow OTA updates?
Click to expand...
Click to collapse
yeah the Guru reset was designed to put the phone back to stock
it uses an Aroma installer .. choose Stock Recovery to be able to receive OTA in the future. but you won't be able to flash any custom roms or Root with the stock recovery

that seemed to do the trick. phone is back stock.
after initial setup t imediately downloaded and installed a small update. rebooted and then asked to download another 4.3 675mb big update. that one seemed to reset the devce to new again. after setup the 2nd time i can see it didnt work as the phone was as if i had just completed the guru install...
thoughts?

phupton said:
that seemed to do the trick. phone is back stock.
after initial setup t imediately downloaded and installed a small update. rebooted and then asked to download another 4.3 675mb big update. that one seemed to reset the devce to new again. after setup the 2nd time i can see it didnt work as the phone was as if i had just completed the guru install...
thoughts?
Click to expand...
Click to collapse
did the second update give an error or just didn't take ?

[Q] Trying to revert to stock ROM from GPE

Hi, I'm trying to revert my HTC one to stock ROM. I'd previously followed a tutorial on flashing it to GPE, but I can't find (or more likely don't have the smarts) to get it back to a stock ROM..
It's a 3 UK model, H3G__001, and I have been having trouble finding a backup, but have found a RAR file called M7 TWRP Nandroid Backup CID H3G 001 2.24.771.3 .rar from the HTC1guru downloads page.
Trouble is - I don't know exactly how to restore this file, and despite my best googling efforts, I'm stuck.
Can anyone help with a step-by-step ? ( Sorry I hate to have to ask )
Phone Info :
C:\sdk-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.1700.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3845mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s
Plz help a numpty!

Colinmac said:
Hi, I'm trying to revert my HTC one to stock ROM. I'd previously followed a tutorial on flashing it to GPE, but I can't find (or more likely don't have the smarts) to get it back to a stock ROM..
It's a 3 UK model, H3G__001, and I have been having trouble finding a backup, but have found a RAR file called M7 TWRP Nandroid Backup CID H3G 001 2.24.771.3 .rar from the HTC1guru downloads page.
Trouble is - I don't know exactly how to restore this file, and despite my best googling efforts, I'm stuck.
Can anyone help with a step-by-step ? ( Sorry I hate to have to ask )
Phone Info :
C:\sdk-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.00
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.1700.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH38EW902402
(bootloader) imei: 357864058120484
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3845mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s
Plz help a numpty!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2541082
This is the link to the guide. The 4th post is the one which concerns you.
Also, i would suggest that you use this RUU from htc1guru instead of the one you chose:
http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-h3g__001-1-28-771-x-2013-04-09-zip/
The one which u downloaded was TWRP Nandroid. But the guide doesnt explain the TWRP Nandroid as well as CWM Nandroid. So, ive given u the link for the easier method

raghav kapur said:
http://forum.xda-developers.com/showthread.php?t=2541082
This is the link to the guide. The 4th post is the one which concerns you.
Also, i would suggest that you use this RUU from htc1guru instead of the one you chose:
http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-h3g__001-1-28-771-x-2013-04-09-zip/
The one which u downloaded was TWRP Nandroid. But the guide doesnt explain the TWRP Nandroid as well as CWM Nandroid. So, ive given u the link for the easier method
Click to expand...
Click to collapse
the link you gave is 1.28.771 and theirs a good chance with his firmware he will have no touchscreen driver for that Nandroid ...he already has the best file in my opinion
@Colinmac
Easy way back to Sense rom is flash the developer RUU here
http://www.androidruu.com/getdownlo...8_10.38r.1157.04L_release_353887_signed_3.exe

raghav kapur said:
http://forum.xda-developers.com/showthread.php?t=2541082
This is the link to the guide. The 4th post is the one which concerns you.
Also, i would suggest that you use this RUU from htc1guru instead of the one you chose:
http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-h3g__001-1-28-771-x-2013-04-09-zip/
The one which u downloaded was TWRP Nandroid. But the guide doesnt explain the TWRP Nandroid as well as CWM Nandroid. So, ive given u the link for the easier method
Click to expand...
Click to collapse
Ok. I downloaded the linked CWM zip and renamed it ruu.zip for convenience, but when I try and fastboot flash it, I get :
C:\sdk-tools>fastboot flash zip ruu.zip
target reported max download size of 1526722560 bytes
sending 'zip' (963956 KB)...
OKAY [ 39.405s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 39.719s
Should I revert to using the linked one in the article ? I was thinking the zip you linked would be a closer match ?
If I go down the route of flashing the dev RUU - will I need to do anything else post-flash?
I couldn't find much evidence of this being a working option on a retail phone - but that may be old info....

Colinmac said:
Ok. I downloaded the linked CWM zip and renamed it ruu.zip for convenience, but when I try and fastboot flash it, I get :
C:\sdk-tools>fastboot flash zip ruu.zip
target reported max download size of 1526722560 bytes
sending 'zip' (963956 KB)...
OKAY [ 39.405s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 39.719s
Should I revert to using the linked one in the article ? I was thinking the zip you linked would be a closer match ?
Click to expand...
Click to collapse
you can't flash a nandriod backup like a rom
you have to copy it to your phone's clockworkmod/backup folder then restore it from recovery ... same for the TWRP nandriod .. it must be copied to TWRP/BACKUP/YourPhoneSN/Dateofbackup
Like I said lock your bootloader and the Developer edition RUU is your easy out

clsA said:
you can't flash a nandriod backup like a rom
you have to copy it to your phone's clockworkmod/backup folder then restore it from recovery ... same for the TWRP nandriod .. it must be copied to TWRP/BACKUP/YourPhoneSN/Dateofbackup
Like I said lock your bootloader and the Developer edition RUU is your easy out
Click to expand...
Click to collapse
Ok. so I relocked the bootloader, and grabbed that DEV .exe updater.
Sadly, it reboots phone into the silver HTC logo, then checks, and starts to update and then crashes. Rebooting and rerunning produced the same results...
I'm on Win8 - would it be OS related ?

Colinmac said:
Ok. so I relocked the bootloader, and grabbed that DEV .exe updater.
Sadly, it reboots phone into the silver HTC logo, then checks, and starts to update and then crashes. Rebooting and rerunning produced the same results...
I'm on Win8 - would it be OS related ?
Click to expand...
Click to collapse
no if it were windows 8 related the RUU would not have started
how far in was it when it failed. 2 min ? less ? or more?

clsA said:
no if it were windows 8 related the RUU would not have started
how far in was it when it failed. 2 min ? less ? or more?
Click to expand...
Click to collapse
Hi - it gets to the update process - step 1 of 5 or so - then blows up. It did say I needed to get the correct version for my phone ?
Could it be CID ?

Colinmac said:
Hi - it gets to the update process - step 1 of 5 or so - then blows up. It did say I needed to get the correct version for my phone ?
Could it be CID ?
Click to expand...
Click to collapse
I'm not sure .. i guess you should try pushing the TWRP nanadriod again
does your phone boot up to the OS ?

clsA said:
I'm not sure .. i guess you should try pushing the TWRP nanadriod again
does your phone boot up to the OS ?
Click to expand...
Click to collapse
If I powerdown then back up - it boots back into my GPE fine.
The Nandroid backup I have is a .rar file - is it ok to unpack and repack as a .zip or can I just push the rar ?
Also I can't seem to now unlock my bootloader again - if I run the flash unlocktoken, the screen asking if I want to unlock does not reappear as it did the first time.
Man, I'm scratching my head a lot - sorry for being a dud.

Colinmac said:
If I powerdown then back up - it boots back into my GPE fine.
The Nandroid backup I have is a .rar file - is it ok to unpack and repack as a .zip or can I just push the rar ?
Also I can't seem to now unlock my bootloader again - if I run the flash unlocktoken, the screen asking if I want to unlock does not reappear as it did the first time.
Man, I'm scratching my head a lot - sorry for being a dud.
Click to expand...
Click to collapse
Ouch ... your s-off I don't think you needed to relock I made a mistake
what version of TWRP do you have installed ?

clsA said:
Ouch ... your s-off I don't think you needed to relock I made a mistake
what version of TWRP do you have installed ?
Click to expand...
Click to collapse
Its 2.6.0.1

Colinmac said:
Its 2.6.0.1
Click to expand...
Click to collapse
your s-off so we can get this...
first boot to recovery and do a nandroid backup
and then boot the phone back up
then unrar your TWRP backup (that you downloaded) to your pc to a folder called nandroid
you then copy this to the location TWRP/BACKUP/YourPhoneSerialno/Put nandriod here
now reboot recovery and in TWRP choose backup .. nandroid should be their
restore it

clsA said:
your s-off so we can get this...
first boot to recovery and do a nandroid backup
and then boot the phone back up
then unrar your TWRP backup (that you downloaded) to your pc to a folder called nandroid
you then copy this to the location TWRP/BACKUP/YourPhoneSerialno/Put nandriod here
now reboot recovery and in TWRP choose backup .. nandroid should be their
restore it
Click to expand...
Click to collapse
Magic - that's the phone booting back to stock - worked brilliantly cheers !
Now to try and get the stock recovery etc back lol.
Thanks for your help bud !

Ah turns out it's not quite that simple. Android wants to get OTA updates but when the phone reboots to do it - it enters twrp recovery.
I need to get the stock recovery back also - so I downloaded what I think is the right version of recovery.img but when I try and fastboot flash it - it fails.
Would I need the phone back unlocked for this? And if so - how do I go about it now?

Colinmac said:
Ah turns out it's not quite that simple. Android wants to get OTA updates but when the phone reboots to do it - it enters twrp recovery.
I need to get the stock recovery back also - so I downloaded what I think is the right version of recovery.img but when I try and fastboot flash it - it fails.
Would I need the phone back unlocked for this? And if so - how do I go about it now?
Click to expand...
Click to collapse
you can either re-unlock the bootloader with the s-off method (guru bootloader tool) to flash your stock recovery or pack up your recovery.img in a firmware.zip and flash it in ruu mode with a locked bootloader.
To use the guru bootloader tool go to this page: http://www.htc1guru.com/guides/guru-bootloader-reset/
save the zip on your sd card, boot in recovery, select ''install'' and choose the guru bootloader tool. This will open the aroma installer. Chose to unlock bootloader. be careful not turning back s-on with the tool. The tool only work with s-off phones.
edit: oh wait! just realized you are on twrp 2.6.0.1. The tool is intended for 2.6.3.3, not sure if it will work...

alray said:
you can either re-unlock the bootloader with the s-off method (guru bootloader tool) to flash your stock recovery or pack up your recovery.img in a firmware.zip and flash it in ruu mode with a locked bootloader.
To use the guru bootloader tool go to this page: http://www.htc1guru.com/guides/guru-bootloader-reset/
save the zip on your sd card, boot in recovery, select ''install'' and choose the guru bootloader tool. This will open the aroma installer. Chose to unlock bootloader. be careful not turning back s-on with the tool. The tool only work with s-off phones.
edit: oh wait! just realized you are on twrp 2.6.0.1. The tool is intended for 2.6.3.3, not sure if it will work...
Click to expand...
Click to collapse
I agree Stay s-off for as long as possible
just thinking out loud here ..but i think he may need to downgrade his hboot back to 1.44 to get an unlocktoken

alray said:
you can either re-unlock the bootloader with the s-off method (guru bootloader tool) to flash your stock recovery or pack up your recovery.img in a firmware.zip and flash it in ruu mode with a locked bootloader.
To use the guru bootloader tool go to this page: http://www.htc1guru.com/guides/guru-bootloader-reset/
save the zip on your sd card, boot in recovery, select ''install'' and choose the guru bootloader tool. This will open the aroma installer. Chose to unlock bootloader. be careful not turning back s-on with the tool. The tool only work with s-off phones.
edit: oh wait! just realized you are on twrp 2.6.0.1. The tool is intended for 2.6.3.3, not sure if it will work...
Click to expand...
Click to collapse
Ok. The guru tool ran - but I definitely chose unlock bootloader but it hasnt worked.
Can you clarify the RUU flashing business for the recovery ? I figure if I can get the phone to get itself up to date, I can factory reset it to get rid of any odd lingering mods?
does a firmware.zip need anything other than the .img file in it?

clsA said:
I agree Stay s-off for as long as possible
just thinking out loud here ..but i think he may need to downgrade his hboot back to 1.44 to get an unlocktoken
Click to expand...
Click to collapse
I'm happy to retain S-Off until I was to sell the phone on.
Man, I'm so out of my depth now - didn't realise I had upgraded my hboot - how would I go about that ?

Colinmac said:
Ok. The guru tool ran - but I definitely chose unlock bootloader but it hasnt worked.
Can you clarify the RUU flashing business for the recovery ? I figure if I can get the phone to get itself up to date, I can factory reset it to get rid of any odd lingering mods?
does a firmware.zip need anything other than the .img file in it?
Click to expand...
Click to collapse
try and flash this from recovery first then reboot and try the GURU reset tool again
https://www.dropbox.com/s/n49t43thctnl02a/TWRP_2.6.3.3_m7.zip
it's the flashable zip

[Q] possible to s-off or unlock bootloader with usb debug off???

Hello
I have HTC one m7_u cid 332 hboot 1.55
For my phone there is no stock RUU searched every where
Phone is hang on HTC logo
I can go to fast boot menu tryed to unlock bootloader with htcdev but not work
My question is there any way to s-off or unlock boot loader without USB debugging on ?????
Tanx

afghan-gsm-mastermind said:
Hello
I have HTC one m7_u cid 332 hboot 1.55
For my phone there is no stock RUU searched every where
Phone is hang on HTC logo
I can go to fast boot menu tryed to unlock bootloader with htcdev but not work
My question is there any way to s-off or unlock boot loader without USB debugging on ?????
Tanx
Click to expand...
Click to collapse
bootloader is unlocked with fastboot not adb, so usb debugging is not required. Btw usb debugging only affect the usb connection when the phone is booted in the OS so its does not affect bootloader unlocking, fastboot commands or adb commands from recovery.

alray said:
bootloader is unlocked with fastboot not adb, so usb debugging is not required. Btw usb debugging only affect the usb connection when the phone is booted in the OS so its does not affect bootloader unlocking, fastboot commands or adb commands from recovery.
Click to expand...
Click to collapse
I tried unlocking bootloader with htcdev all thing gose OK but after restart phone is lock again I should say phone is dead and hang on HTC logo

Waiting for help .......

afghan-gsm-mastermind said:
Waiting for help .......
Click to expand...
Click to collapse
how are we suppose to help you with a locked bootloader ?

clsA said:
how are we suppose to help you with a locked bootloader ?
Click to expand...
Click to collapse
I've told him this in a previous thread. . Without an unlocked bootloader he is stuck.. He has to unlock first...
Sent from my GT-I9505 using XDA Premium 4 mobile app

s-on, No Os, unlocked, got twrp. Cant install stock RUU!!
Hi. Im a little bit confused with my HTC__016 One M7, My phone is currently S-On with no Os and no recovery image. I cant transfer a stock ruu to my phone or twrp to install. I have tried using adb and fastboot, I have cleared all caches too. If i boot into recovery and i use twrp to fix permissions it says E: Unable to mount data and cache. I have tried adb sideload aswell and it seems to work but then always fails at the certificate verification.. I assume that this is S-On's fault. How should i proceed? I dont want to hard brick my device, i still have my basebands too thank goodness..
What can I do to fix my phones file system or how can i transfer the stock RUU.. I have tried 3 diferent stock RUUs and they all fail at certificate verification. I would really appreciate the help..
Thanks A lot

AnonZA said:
Hi. Im a little bit confused with my HTC__016 One M7, My phone is currently S-On with no Os and no recovery image. I cant transfer a stock ruu to my phone or twrp to install. I have tried using adb and fastboot, I have cleared all caches too. If i boot into recovery and i use twrp to fix permissions it says E: Unable to mount data and cache. I have tried adb sideload aswell and it seems to work but then always fails at the certificate verification.. I assume that this is S-On's fault. How should i proceed? I dont want to hard brick my device, i still have my basebands too thank goodness..
What can I do to fix my phones file system or how can i transfer the stock RUU.. I have tried 3 diferent stock RUUs and they all fail at certificate verification. I would really appreciate the help..
Thanks A lot
Click to expand...
Click to collapse
Post a fastboot getvar all minus imei no and serial no. Post links to recovery's you have tried and links to RUU'S. and also commands you have tried to flash recovery and RUU's
Sent from my GT-I9505 using XDA Premium 4 mobile app

AnonZA said:
Hi. Im a little bit confused with my HTC__016 One M7, My phone is currently S-On with no Os and no recovery image. I cant transfer a stock ruu to my phone or twrp to install. I have tried using adb and fastboot, I have cleared all caches too. If i boot into recovery and i use twrp to fix permissions it says E: Unable to mount data and cache. I have tried adb sideload aswell and it seems to work but then always fails at the certificate verification.. I assume that this is S-On's fault. How should i proceed? I dont want to hard brick my device, i still have my basebands too thank goodness..
What can I do to fix my phones file system or how can i transfer the stock RUU.. I have tried 3 diferent stock RUUs and they all fail at certificate verification. I would really appreciate the help..
Thanks A lot
Click to expand...
Click to collapse
sounds like your trying to sideload a RUU.zip .. that won't work
to flash RUU.zip use
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip <<yes two times
fastboot reboot
you just need the rom.zip in the same folder as fastboot

HTC__016
bored_stupid said:
Post a fastboot getvar all minus imei no and serial no. Post links to recovery's you have tried and links to RUU'S. and also commands you have tried to flash recovery and RUU's
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 3847mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
---------- Post added at 04:00 PM ---------- Previous post was at 03:55 PM ----------
clsA: I tried those command million of times. It kept coming back with "boot loader signature verification..." My phone is WIPED as you can see. So usb debugging is off presumably..
Click to expand...
Click to collapse

You have the international M7 ul so download and install this rom. Follow the guide on installing
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Sent from my GT-I9505 using XDA Premium 4 mobile app

I Formatted partition using "How to: Fix a corrupted DATA partition on the HTC One" Then tried these commands (1) fastboot oem rebootRUU (2) fastboot flash zip rom.zip
{C:\Users\####\Desktop\Mini SDK>fastboot flash zip rom.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1239446 KB)...
OKAY [ 46.879s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 61.244s
I think my next step is a stock stock RUU right?
Thanks a lot for the help..

Wrong one Apparently..
bored_stupid said:
You have the international M7 ul so download and install this rom. Follow the guide on installing
(LINK)
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I ran with admin rights, went through all the windows till i said update.. then i get error code 155, and that error code means incorrect ROM according to the programs readme!
What other ROM should I try?
Sorry to be such a pain.. I just need to use my device again.. lol

AnonZA said:
I Formatted partition using "How to: Fix a corrupted DATA partition on the HTC One" Then tried these commands (1) fastboot oem rebootRUU (2) fastboot flash zip rom.zip
{C:\Users\####\Desktop\Mini SDK>fastboot flash zip rom.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1239446 KB)...
OKAY [ 46.879s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 61.244s
I think my next step is a stock stock RUU right?
Thanks a lot for the help..
Click to expand...
Click to collapse
Basically you are trying to flash a file in the bootloader that is not intended to be flashed that way. Use custom recovery or it may be an update, in that case it needs stock recovery.
Sent from my GT-I9505 using XDA Premium 4 mobile app

[Q] Major Issue

Maybe someone can help me out. I was given an M8 from a friend and was told if I can get it working it's mine to keep. All it will do is boot in the bootloader. He didn't really know what he was doing and screwed it up big time. Here is the info I pulled. Can anything be done? I'm not real familiar with adb, but have used it a couple times in the distant past when someone gave me step by step instructions.
bootloader) version: 0.5
bootloader) version-bootloader: 3.16.0.0000
bootloader) version-baseband: 1.08.20.0610
bootloader) version-cpld: None
bootloader) version-microp: None
bootloader) version-main:
bootloader) version-misc: PVT SHIP S-ON
bootloader) serialno: HT43Y
bootloader) imei:
bootloader) imei2: Not Support
bootloader) meid:
bootloader) product: m8_whl
bootloader) platform: hTCBmsm8974
bootloader) modelid: 0P6B70000
bootloader) cidnum: SPCS_001
bootloader) battery-status: good
bootloader) battery-voltage: 0mV
bootloader) partition-layout: Generic
bootloader) security: on
bootloader) build-mode: SHIP
bootloader) boot-mode: FASTBOOT
bootloader) commitno-bootloader: ab0efa49
bootloader) hbootpreupdate: 11
bootloader) gencheckpt: 0

Hit the link below. Follow the directions for the 1.54.651.10 RUU in the first post. That should get you up and running. For future reference, I wouldn't post the full serial number, IMEI or MEID of the phone.
http://forum.xda-developers.com/showthread.php?t=2729173
Sent from my HTC M8

Magnum_Enforcer said:
Hit the link below. Follow the directions for the 1.54.651.10 RUU in the first post. That should get you up and running. For future reference, I wouldn't post the full serial number, IMEI or MEID of the phone.
http://forum.xda-developers.com/showthread.php?t=2729173
Sent from my HTC M8
Click to expand...
Click to collapse
OK, that's what I originally tried. but I always get an error
C:\Users\gnc\Desktop\M8\One_M8_All-In-One_Kit_v\data>
M.zip
target reported max download size of 1830711296 bytes
sending 'zip' (30196 KB)...
OKAY [ 1.775s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 4.103s

Blars1206 said:
OK, that's what I originally tried. but I always get an error
C:\Users\gnc\Desktop\M8\One_M8_All-In-One_Kit_v\data>
M.zip
target reported max download size of 1830711296 bytes
sending 'zip' (30196 KB)...
OKAY [ 1.775s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 4.103s
Click to expand...
Click to collapse
It has no recovery on it either, just the bootloader.

Forgot to mention that since you're S-on you'll need to relock your bootloader.
Use the command "fastboot oem lock" while connected via Fastboot USB mode (without quotation marks).
Sent from my HTC M8

Magnum_Enforcer said:
Forgot to mention that since you're S-on you'll need to relock your bootloader.
Sent from my HTC M8
Click to expand...
Click to collapse
The bootloader is locked.
How can get the file to storage without any recovery?

Blars1206 said:
The bootloader is locked.
How can get the file to storage without any recovery?
Click to expand...
Click to collapse
Rename 0P6BIMG.zip and flash in bootloader. Forgot to mention to put on root of you external sd card.
Sent from my 831C using XDA Premium 4 mobile app

It has to be on your external SD card if you're going to flash it per the posted instructions. Otherwise, connect your phone and computer while in the bootloader. The RUU will need to be on your computer. Double-click the file to start the install process. If you need more info on how to work the bootloader hit the second link in my sig.
Sent from my HTC M8

Magnum_Enforcer said:
It has to be on your external SD card if you're going to flash it per the posted instructions. Otherwise, connect your phone and computer while in the bootloader. The RUU will need to be on your computer. Double-click the file to start the install process. If you need more info on how to work the bootloader hit the second link in my sig.
Sent from my HTC M8
Click to expand...
Click to collapse
Thank you guys so much for the help. I didn't have a ext sd card in it and was hoping for another way, but I'm only seeing a fastboot only for that RUU. So, I'll get a sd card and do it the way the instructions say.
Seriously, thank you for taking the time to help me!

Blars1206 said:
Thank you guys so much for the help. I didn't have a ext sd card in it and was hoping for another way, but I'm only seeing a fastboot only for that RUU. So, I'll get a sd card and do it the way the instructions say.
Seriously, thank you for taking the time to help me!
Click to expand...
Click to collapse
I run all my RUUs in fastboot... It's really simple.
Edit: also have you tried just installing a custom recovery from fastboot? Download a recovery.img of your choice. Boot into bootloader. Then in a cmd prompt type (fastboot flash recovery "name of your recovery img") and then enter. Make sure your recovery IMG is in the same folder as fastboot.

gunfromsako said:
I run all my RUUs in fastboot... It's really simple.
Edit: also have you tried just installing a custom recovery from fastboot? Download a recovery.img of your choice. Boot into bootloader. Then in a cmd prompt type (fastboot flash recovery "name of your recovery img") and then enter. Make sure your recovery IMG is in the same folder as fastboot.
Click to expand...
Click to collapse
I ended just getting a SD card and running the RUU from that and it worked and I'm back in business. yay!
I was trying to get a custom recovery installed but I kept getting errors. I even tried another computer and still same error. I don't know if I was doing something wrong, it kept telling me something about the file size was to large so I just gave up trying that route because I don't know enough about fastboot commands and how to interpret what it's telling me to figure it out myself.
I'm now s-off and running Sinless....so life is grand! lol
But thanks for taking the time to respond.

Blars1206 said:
I ended just getting a SD card and running the RUU from that and it worked and I'm back in business. yay!
I was trying to get a custom recovery installed but I kept getting errors. I even tried another computer and still same error. I don't know if I was doing something wrong, it kept telling me something about the file size was to large so I just gave up trying that route because I don't know enough about fastboot commands and how to interpret what it's telling me to figure it out myself.
I'm now s-off and running Sinless....so life is grand! lol
But thanks for taking the time to respond.
Click to expand...
Click to collapse
Not a problem... I was a newb at one point so I try to help when I can.

[Q] Help Emergency HTC one issues!!!!

Hello,
Okay so I had an HTC one that was stuck on the boot screen. Well I had a feeling it was rooted but was not sure because clorkworkmod always said boot with "root access" which I ignored. So first off I found something called guru reset 2.24.401.8 which was my version of my phone. So I used adb side load to move to my device then installed it. It worked fine and I was excited however it booted to a black screen with only the battery status, reception meter, and time bar. When I tried using recovery again the phone would show a green sign and then a red exclamation mark sign. I tried for so long going into recovery, but to no avail. I used fast boot to flash recovery and erase cache but did not work. I am terribly stuck and need help.
MIDN0710000
Version:2.24.401.8
Please help a brother in need.
Thank you
Sorry for any mistake wrote this really late.

kobster98 said:
Hello,
Okay so I had an HTC that was stuck on the boot screen. Well I had a feeling it was rooted but was not sure because clorkworkmod always say boot with "root access" which I ignored. So first off I found something called guru reset 2.24.401.8 which was my version of my phone. So I use adb side load to move to my device then install it. It worked fine and I was excited however it booted a black screen with only the battery status reception meter and time. When I tried using recovery again the phone would show a green sign and then a red exclamation mark sign. I tried for so long going in recovery to no avail. I use fast boot to flash recovery and erase cache but did not work. I am terribly stuck and need help.
MIDN0710000
Version:2.24.401.8
Please help a brother in need.
Thank you
Sorry for any mistake wrote this really late.
Click to expand...
Click to collapse
When you flashed the Guru Reset you must have selected "stock recovery" because that is the black screen with green or red triangle. Follow these steps:
Get TWRP 2.6.3.3 from: http://techerrata.com/browse/twrp2/m7
(make sure MD5 is correct, that site does not play nice with download managers)
in bootloader/FASTBOOT USB:
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader

Thanks
I have been able to do it and thank you, but i am having issue with adb my fastboot work and is able to find my devices but adb does not.

kobster98 said:
I have been able to do it and thank you, but i am having issue with adb my fastboot work and is able to find my devices but adb does not.
Click to expand...
Click to collapse
ADB works in OS/Android with USB Debugging enabled in Developer Options and in Recovery Mode. It will not work if the phone is in bootloader/FASTBOOT USB.

About to give up
Okay you have been great help, and i need major help i have tried every thing, my phone doesn't boot up properly and just has a black screen, i have tried using guru reset 2.24.401.8 to reset and it doesnt work, i tried with an unlocked bootloader, but with S-On and i read an article saying guru reset should work regardless if it is s-on or s-off. im not sure though. I am not stuck because my phone Hboot is 1.54 and i have tried using rumrunner but doesnt work because my adb only work in recovery. I would like to S-off my phone to be able to install the guru reset. rom. I have tried using RUU's but cant find my radio version. is there any possible way to S-off my phone without an OS to install unto. Or is there any way to re-install my OS i am running out of ideas. Thank you very much!!

kobster98 said:
Okay you have been great help, and i need major help i have tried every thing, my phone doesn't boot up properly and just has a black screen, i have tried using guru reset 2.24.401.8 to reset and it doesnt work, i tried with an unlocked bootloader, but with S-On and i read an article saying guru reset should work regardless if it is s-on or s-off. im not sure though. I am not stuck because my phone Hboot is 1.54 and i have tried using rumrunner but doesnt work because my adb only work in recovery. I would like to S-off my phone to be able to install the guru reset. rom. I have tried using RUU's but cant find my radio version. is there any possible way to S-off my phone without an OS to install unto. Or is there any way to re-install my OS i am running out of ideas. Thank you very much!!
Click to expand...
Click to collapse
There is no way to s-off without a Rom on the phone.
You can push a Rom to the phone using adb in recovery. Which recovery are you using. You should use TWRP 2.6.3.3 to avoid any problems installing the Guru Reset Rom.
Put the Rom in your adb/fastboot folder and rename it to rom.zip. Connect adb in recovery and in the command window type.
Code:
adb push rom.zip /sdcard
The command window will appear unresponsive until the push completes several minutes. When it's done install the Rom with twrp recovery.
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

rom install
i tried and installed a guru reset rom,however when i installed it just boots to a plain blackscreen with only the battery status, time, and reception bar showing, yes i am using twrp 2.6.3.3.
thank you for reply

kobster98 said:
i tried and installed a guru reset rom,however when i installed it just boots to a plain blackscreen with only the battery status, time, and reception bar showing, yes i am using twrp 2.6.3.3.
thank you for reply
Click to expand...
Click to collapse
Did you install the reset Rom with Twrp 2.6.3.3 your first post indicates you used CWM
Can you please post the out put from
Code:
fastboot getvar all
Please remove imei and serial numbers before posting.
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Help
Thanks,
Yea i have twrp 2..6.3.3 installed as recovery, i did have clorkworkmod previously but guru reset wiped my data after installation. So i switched to twrp recovery. What Rom or RUU should i install?
Thanks for your time. Info you need is below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

kobster98 said:
Thanks,
Yea i have twrp 2..6.3.3 installed as recovery, i did have clorkworkmod previously but guru reset wiped my data after installation. So i switched to twrp recovery. What Rom or RUU should i install?
Thanks for your time.
Info you need is below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Here is the only RUU I could find that is a higher version than yours. There have been people who have bricked their phone by jumping version so I have provide the firmware for the version from 2.24.401.8 to RUU 4.19.401.9.
Firmware 3.62.401.1
Firmware 4.19.401.8
RUU 4.19.401.9
To flash the firmware, place the firmware in your adb/fastboot folder, open a command window in your adb/fastboot folder:
Code:
[B][I]adb reboot bootloader[/I][/B]
After that, type:
Code:
fastboot oem lock
Type:
Code:
[B][I]fastboot oem rebootRUU [/I][/B]
NOTE: You should see a silver HTC logo come up on your phone after executing this command.
NOTE: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:
Code:
[B][I]fastboot flash zip [COLOR="Purple"]name_of_firmware.zip[/COLOR][/I][/B]
Repeat the same command: IMPORTANT
Code:
[B][I]fastboot flash zip [COLOR="Purple"]name_of_firmware.zip[/COLOR][/I][/B]
NOTE: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Last Step:
Code:
[B][I]fastboot reboot-bootloader[/I][/B]
Click to expand...
Click to collapse
After the last firmware reboots, then run the RUU.

Follow @majmoz instructions, but for the record the RUU should work fine after flashing 3.62.401.1 firmware. As the RUU will contain the full firmware up to 4.19.401.9. So no risk of firmware mismatch.
majmoz said:
Here is the only RUU I could find that is a higher version than yours. There have been people who have bricked their phone by jumping version so I have provide the firmware for the version from 2.24.401.8 to RUU 4.19.401.9.
Firmware 3.62.401.1
Firmware 4.19.401.8
RUU 4.19.401.9
To flash the firmware, place the firmware in your adb/fastboot folder, open a command window in your adb/fastboot folder:
After the last firmware reboots, then run the RUU.
Click to expand...
Click to collapse
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Thanks
So i should use the 4.19.401.9 RUU, but why am i locking the bootloader, doesnt it need to be unlocked. I will try your process. I am very grateful.

kobster98 said:
So i should use the 4.19.401.9 RUU, but why am i locking the bootloader, doesnt it need to be unlocked. I will try your process. I am very grateful.
Click to expand...
Click to collapse
Flash the 3.62.401.1 firmware as per majmoz instructions. Then you can use the RUU to update your phone to kit Kat.
You have to be unlocked to flash Custom software. But the RUU and Firmware are signed Stock files. Because your s-on you must be relocked to flash them
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Thanks
okay so i tried running the steps but my phone did not reboot once, and bootloader say successful, but i get an error.
Here:
C:\Users\Family\Desktop\root\adt-bundle-windows-x86_64-20140702\sdk\platform-too
ls>Fastboot oem rebooutruu
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.002s]
finished. total time: 0.002s
C:\Users\Family\Desktop\root\adt-bundle-windows-x86_64-20140702\sdk\platform-too
ls>fastboot flash zip 3.62.401.1_full_stock_sense_firmware.zip
sending 'zip' (97331 KB)...
OKAY [ 5.001s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 15.428s
C:\Users\Family\Desktop\root\adt-bundle-windows-x86_64-20140702\sdk\platform-too
ls>fastboot flash zip 3.62.401.1_full_stock_sense_firmware.zip
sending 'zip' (97331 KB)...
OKAY [ 5.026s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 15.452s

kobster98 said:
okay so i tried running the steps but my phone did not reboot once, and bootloader say successful, but i get an error.
Here:
C:\Users\Family\Desktop\root\adt-bundle-windows-x86_64-20140702\sdk\platform-too
ls>Fastboot oem rebooutruu
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.002s]
finished. total time: 0.002s
Click to expand...
Click to collapse
Your command to rebootRUU is incorrect it is case sensitive. You also appear to have an extra "u" in there
Code:
fastboot oem rebootRUU
After this command your phone will reboot to a screen with a silver HTC logo. This is RUU mode
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Misunderstanding
Sorry but the problem is that i get Failed (remote:12 signature verify fail) and it does not flash says finished.

kobster98 said:
Sorry but the problem is that i get Failed (remote:12 signature verify fail) and it does not flash says finished.
Click to expand...
Click to collapse
Yes because your phone is not in ruu mode. You cannot flash the firmware in the bootloader.
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Misunderstanding
I am in RUU mode, its a black screen with the HTC logo, but when i type the command to flash the firmware it gives me "failed: 12 signature verify"

kobster98 said:
I am in RUU mode, its a black screen with the HTC logo, but when i type the command to flash the firmware it gives me "failed: 12 signature verify"
Click to expand...
Click to collapse
Ok strange, try this firmware zip instead http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/401/3.62.401.1.zip
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Thank you bro it worked your a life saver