Database Develop

Super dual system, dual systems can share data, share APP, OTA

http://www.miui.com/thread-417628-1-1.html
Principle: the / system partition into two (each 200M), the / cache down to put out more than 20M / system
Dual system like how they are combined can
V20 + V20 √
V20 + MIUI √
V20 + CM √
MIUI + CM √
MIUI + MIUI √
MIUI + V20 √
CM + CM √
CM + V20 √
CM + MIUI √
With their own change from the CSQ is less than 195M of V20E Starter Edition http://115.com/file/e7zt5efl # V20E_20120120.zip (first time set to start in time to exit the wizard)
If you do not want to double the system, use this to restore the original partition, brush recovery after formatting / cache and / system was restored
RecoveryFdisk.zip (142.33 KB, Downloads: 12)
Independent non-shared version of the two systems
No shared version. Zip (457.94 KB, Downloads: 13)
The world's first data-sharing software (such as in the first play of the game system recorded in the second system can be used), the first switch will be some software error, the UID and not the same as another system, run "Repair UID" can share data, and I would use this, video calls and listen to the radio on with the V20E, playing games with MIUI
Shared data version. Zip (479.15 KB, Downloads: 24)
Use these steps: (according to the following steps to some)
1, the first system you want to brush copy of boot.img renamed into boot1.img into the system at the end of the second package dual_system2_20120126.zip of / system / boot in
2, brush your second system to copy the boot.img renamed into boot2.img into the system at the end of the first package dual_system1_20120126.zip of / system / boot in
3, back up your data, including data from 4 built-in SD card, if you now use the system and the first system, then you can do almost double clear WIPE
5, the brush into the autofdisk.zip automatically enter the Recovery partition package, the system will automatically reboot, press the power button + volume under re-enter the Recovery
6, where the first format in the Recovery bit / cache
7, the first direct brush system (after decompression, can be no more than 190M), painted dual_system1_20120126.zip system at the end of the first packet
8, into the first system, run the switching system automatically restart, restart, press the power + volume keys directly under the Recovery
9, the second brush system (after decompression, can be no more than 190M), painted dual_system20120126.zip system at the end of the second pack of 10, share data version, the second system because of the first system software so a first time boot more Slow start until after the first, and then run the repair can be shared UID

ChinaGB great to see you here. I am using your ROM (latest v8 MIUI+GR) since long which is working great for me. Although you have tried your best to make the narration clear still then this "Basics of Dual System" etc is appearing a bit complicated for me more perhaps due to language problem. Can you or anybody else here make it more clear?
Better still if you can give a link for your latest DUAL ROM here for the user get a taste of your new approach.

Wow nice! Dual system phone, yeah!
Thanks

Sounds interesting.

Nice to see this ROM in XDA too. Thanks ChinaGB!

Missing links
Hi,
There are missing link references in the first post, could you please update your post with correct links?
The links in the chinese forum works, I guess. But for us non-chinese citizens it's impossible to understand.
Thank you in advance for this interesting solution!
Cheers,

It would be cool when ics test rom will come out to have cm+test ics too
Sent from my Optimus 2X using XDA App

Welcome ChinaGB! ^_^
i'm looking forward on using this great rom of yours.. SOON!

Anybody with good knowledge of English and Chinese may rewrite the guide in the OP so that we may try this experiment at our end. I understand that CHINAGB has done his best to write the guide even then a more clarity and transparency is required to understand it fully. Hope somebody is there to help us. Moreover, CHINAGB should upload the necessary files. Intact I have used many of his DUAL ROMs successfully and they are intact brilliant.
Sent from my E10i using Tapatalk

parthabhatta said:
Anybody with good knowledge of English and Chinese may rewrite the guide in the OP so that we may try this experiment at our end. I understand that CHINAGB has done his best to write the guide even then a more clarity and transparency is required to understand it fully. Hope somebody is there to help us. Moreover, CHINAGB should upload the necessary files. Intact I have used many of his DUAL ROMs successfully and they are intact brilliant.
Sent from my E10i using Tapatalk
Click to expand...
Click to collapse
+1 waiting for "noob" guide ...

[ROM] 4.0.4 AOSP NEXUS S/4g [IMM30B] Beta4r2 version (07/03/2012)

I'm not the developer of this great ROM. But I consider that it's so good that it must appear in the XDA forum. The developer is ELITE, and he is the person that must upload to the appropiate forum, not me. But I think that everybody would have the opportunity of knowing it.
In the follow link you can see an impressive new ROM developed under the new NEXUS base IMM30B (4.0.4), developed by Elite Based on FoxHound (Galaxy Nexus Modacco)
Beta4r2 version (07/03/2012)
http://www.toma.htcmania.com/showthread.php?t=336223
Chagelog: IMM30B 4.0.4 4r2
- 1 Toogles via CWM
- 2 SD en PC
- 3 Gapps
- 4 T9 Dialer via CWM
- 5 Galaxy S2 4.0.3 appereance
- 6 Better consume
- 7 Apex Launcher
- 8 Beats Audio
- 9 FaceUnlock via CWM
- 10 % Batt
- 11 Volume & Bright w/o FC'S
- 12 Framework optimized
- 13 Modem JVU
- 14 Import contacts from SIM
- 15 GPS Fix
Installation instructions (IF YOU COME FROM AN ICS ROM IT'S NOT NECESSARY THE STEPS 1 TO 4, YOU CAN START ON 5) Nothing special issue for flashing, it's as other ICS roms
We take
1 Keep apart a copy of efs folder for security
2 ° reboot in recovery and from mount / storage format to do everything.
3 ° We turn off the phone and restart download mode.
4 ° We put the ROM JVU from odin with marked repartition restart the mobile alone, shut it off and enter again to get downloading cf-root from odin on pda without repartition. (roms stock http://www.sammobile.com/)
5 once mobile is restarted, we debug rom usb and copy the "4.0.4 beta 4r2" in the internal sd and reboot in recovery.
6 ° We wipe factory reset, cache partition, Dalvik cache and we flash "4.0.4 beta 4r2"
7 ° If we do not start, press the 3 button to return to recovery and repeat step 6.
8 º Open the app NSTools, we select as governor and Scheduler Smartassv2 VR or that you like.
9 ° enjoy ..
Links
4.0.4 [IMM30B] BETA 4 R2. http://-/ http://www.mediafire.com/?52x32zzy8m9dtic
Toogles Status Bar . [WIPE DALVIK & CWM] http://www.mediafire.com/?l7qd31qeploaj47
Contactos T9 . [WIPE DALVIK & CWM] http://www.mediafire.com/?9jw3qhpl1gz36l6
Face Unlock. [WIPE DALVIK & CWM] http://www.mediafire.com/?qwb73zm74uld9iv
Thanks to:
- lanyco
- almeral2010
- manoleitor
- rolodo
- vanscampa
- demonstone
- rodrigoalumno
- cquintana92
- mikelange
- rostro.palido
- Pac-Man
- migui7
- ipepiot11
- stareduski

cont
Nobody is interested?
It is a ROM developed by a spaniard developer -Elite- and is working perfectly in daily use

.htcmania.com/showthread.php?t=336223
Sent from my SGH-I9000 using XDA

cont
As I don't have 10 messages yet I can't write the complete link
They are:
www + .htcmania.com/showthread.php?t=336223 (in Spanish)
or in German
www + .android-hilfe.de/custom-r...2-03-12-a.html

artikeln said:
In the follow link you can see an impressive new ROM developed under the new NEXUS base IMM30B (4.0.4)
I don't have permissions for publishing in others subforums, maybe an authorized one could inform about this incredible ROM
w...toma.htcmania.com/showthread.php?t=336223
I can't even write the complete link
Could anybody do it?
Click to expand...
Click to collapse
http://www.htcmania.com/showthread.php?t=336223:)
There you go!
Can u post a review of this rom or some links? Which is in English?

cont
Achal1012 said:
http://www.htcmania.com/showthread.php?t=336223:)
There you go!
Can u post a review of this rom or some links? Which is in English?
Click to expand...
Click to collapse
Thanks, I'm sure that all the people who test this ROM will be impressed
The original link is up in this message. The last version is the beta4
Original text translated from Spanish
Installation instructions by Pirri_Mori (in red for Beta4) (IF YOU COME FROM AN ICS ROM IT'S NOT NECESSARY THE STEPS 1 TO 4, YOU CAN START ON 5)
We take
1 efs folder to your computer and all we want to keep.
2 ° reboot in recovery and from mount / storage format to do everything.
3 ° We turn off the phone and restart download mode.
4 ° We put the ROM JVU from odin with marked repartition restart the mobile alone, shut it off and enter again to get downloading cf-root from odin on pda without repartition.
5 once mobile is restarted, we debug rom usb and copy the "4.0.4 beta 4" in the internal sd and reboot in recovery.
6 ° We wipe factory reset, cache partition, Dalvik cache and we flash "4.0.4 beta 4"
7 ° If we do not start, press the 3 button to return to recovery and repeat step 6.
8 º Open the app NSTools, we select as governor and Scheduler Smartassv2 VR or that you like.
9 º disable the GPS, we set screen brightness and repaired automatically.
10 º We selected media device in USB support.
11 º begin the recovery, we wipe Dalvik cache and install the fix SD for Beta4.
12 º We again after starting the recover, wipe Dalvik cache and install the Google Apps with your package you will (come all).
13 ° enjoy ..
- Information on Beta4 (02/03/12):
- Android 4.0.4 [IMM30B] OFFICER (NO CM)
- Fixed bug Android OS
- Control BLN (Light LED's)
- Rooted
- BT & Wifi without problems
- Sensors and graphics files Nexus S
- Fast and stable (daily use)
- Excellent use
- Fix Pin Phone
- Sync Facebook
- Mount SD PC
- Toogles in Status Bar
- Beats Audio
- Market
- Nova 10.1 Launcher
- Flash Player
- Google's App updated
- Mount SD mobile
- Update build.prop (Toro)
- Virtual Keyboard (Option to disable)
- Wifi Thetering
- Calculator Touchwiz
- Bugs:
(Beta4) Like the other betas, it takes a while to get the bars of coverage (seeking Fix)
(Beta4) FC on screen brightness.
BEFORE THE BETA 3/4 PLEASE READ THIS:
1, THE ROM IS A NEW BASE
2 ° THE ROM HAS NO PROBLEM (FULLY FUNCTIONAL, WIFI, GSM, BT, 3G, STORAGE, ETC ..)
3 WILL SLOWLY THINGS SOLVING.
4° THE COMMENT "NO ROM TAKES CONTROL, THAT IS Cyanogen, AND THIS IS NOT"
5 ° I repeat, NOT A WORKING COPY / PASTE.

artikeln said:
Thanks, I'm sure that all the people who test this ROM will be impressed
The original link is up in this message. The last version is the beta4
Original text translated from Spanish
Installation instructions by Pirri_Mori (in red for Beta4) (IF YOU COME FROM AN ICS ROM IT'S NOT NECESSARY THE STEPS 1 TO 4, YOU CAN START ON 5)
We take
1 efs folder to your computer and all we want to keep.
2 ° reboot in recovery and from mount / storage format to do everything.
3 ° We turn off the phone and restart download mode.
4 ° We put the ROM JVU from odin with marked repartition restart the mobile alone, shut it off and enter again to get downloading cf-root from odin on pda without repartition.
5 once mobile is restarted, we debug rom usb and copy the "4.0.4 beta 4" in the internal sd and reboot in recovery.
6 ° We wipe factory reset, cache partition, Dalvik cache and we flash "4.0.4 beta 4"
7 ° If we do not start, press the 3 button to return to recovery and repeat step 6.
8 º Open the app NSTools, we select as governor and Scheduler Smartassv2 VR or that you like.
9 º disable the GPS, we set screen brightness and repaired automatically.
10 º We selected media device in USB support.
11 º begin the recovery, we wipe Dalvik cache and install the fix SD for Beta4.
12 º We again after starting the recover, wipe Dalvik cache and install the Google Apps with your package you will (come all).
13 ° enjoy ..
- Information on Beta4 (02/03/12):
- Android 4.0.4 [IMM30B] OFFICER (NO CM)
- Fixed bug Android OS
- Control BLN (Light LED's)
- Rooted
- BT & Wifi without problems
- Sensors and graphics files Nexus S
- Fast and stable (daily use)
- Excellent use
- Fix Pin Phone
- Sync Facebook
- Mount SD PC
- Toogles in Status Bar
- Beats Audio
- Market
- Nova 10.1 Launcher
- Flash Player
- Google's App updated
- Mount SD mobile
- Update build.prop (Toro)
- Virtual Keyboard (Option to disable)
- Wifi Thetering
- Calculator Touchwiz
- Bugs:
(Beta4) Like the other betas, it takes a while to get the bars of coverage (seeking Fix)
(Beta4) FC on screen brightness.
BEFORE THE BETA 3/4 PLEASE READ THIS:
1, THE ROM IS A NEW BASE
2 ° THE ROM HAS NO PROBLEM (FULLY FUNCTIONAL, WIFI, GSM, BT, 3G, STORAGE, ETC ..)
3 WILL SLOWLY THINGS SOLVING.
4° THE COMMENT "NO ROM TAKES CONTROL, THAT IS Cyanogen, AND THIS IS NOT"
5 ° I repeat, NOT A WORKING COPY / PASTE.
Click to expand...
Click to collapse
Thanks for the translation!!
As you are using this rom can you tell me more about the bugs? Like what else is not working besides screen brightness?
And what does this mean "Not a working copy /paste "??
And last thing why this rom is not posted here on this forum? (maybe you can tell me!! )

The ROM is working perfectly and the only minor bug I have detected is is relation to the brightness and the volume. Both are ok, only is not working for increasing or decreasing, except if you put the fix.
Ref to the fix for the SD, I couldn't identify the problem
ELITE, the developer is preparing a new version, beta4r2, that include theses fixes
Ref to the "And what does this mean "Not a working copy /paste "??", ELITE talks about that this ROM is developed under the Nexus base IMM30B, it's not an evolution of any CM
Ref to the "And last thing why this rom is not posted here on this forum? (maybe you can tell me!! )". All his former developments have been issued only in the htcmania web. ELITE doesn't look too much interested in translating to english the explanations. However after 15 months of flashing roms, for me this is the best ROM I have never settled down in my SGS, and I consider that everybody must know it, enjoy it and contribute to make it even better.

Two messages more and I'll be authorize to talk about this development in the correct forum.
Sorry for this one.
Besides, once this ROM appear there, users from HTCmania will start to talk in English about their own experience

This Rom seems very promising.
Sent from my GT-I9000 using Tapatalk

I'm using this ROM for more than 10 days and the last Beta4 since 48 hours ago and it's really the best ROM I have never settled down.
The developer maybe is not intresred in uploading this ROM that XDA subforum due to XDA is very strict for the new ROMs, and he is not really interested in spending a lot of time in burocracy instead of development.
Never mind, here you are this ROM

Elitemobil the beta4r2 will upload soon, that comment yesterday...
Sent from my GT-I9000 using XDA

So that.
We are waiting that today, maybe tomorrow is released.
Once it's ready, I'll post here

The new 4.0.4 Beta4r2 is released
In page 1

I have been running this for a few hours now. it seems dead fast.
And some how it has got my 3g working again.
Why is this rom in the Q&A??
I have also got the face unlock working. wow it all works

zacburgess said:
I have been running this for a few hours now. it seems dead fast.
And some how it has got my 3g working again.
Why is this rom in the Q&A??
I have also got the face unlock working. wow it all works
Click to expand...
Click to collapse
For reconnecting 3g again you must only switch off the data, put the 3g and switch on the data
I'm not the developer, only I make a reference of this great ROM. And the only place where I can do is in this subforum.
I hope that the developer put his great job in the appropiate forum.

This rom work perfectly for daily use. The only bug is the permanent signal bar.
But, do you have Elite's permission to publish it here?

Better than Dark Night rom?
Sent from my GT-I9000 using xda premium

After 24 hours using the last versión, beta4r2, it's sure that now this ROM for me it's working much better than dark night. It's a real 4.0.4 base
I'm have been flashing ROMs for 14 months and never my SGS has worked as now

doudou1408 said:
Better than Dark Night rom?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Much more. This is a real 4.0.4 and works like a charm :OK:
Enviado desde mi Alcatel One Touch

[ROM] Nubia Z9 Mini (NX511J) ROM + TWRP Recovery (English)

I have made this thread for those users who have bought Nubia Z9 Mini from China and have no Google Services. I have modded the official stock ROM with Google Services. This is PURE stock without any additional tweaks except Root and unnecessary preinstalled Chinese apps removed. You can visit my Google drive to download this custom ROM and I have also included the recovery tool that will install English TWRP recovery.
THIS ROM IS FOR CHINESE VERSION NUBIA... IF YOU FLASH IN INTERNATIONAL/INDIAN VERSION, YOU WILL HAVE PROBLEM WITH NETWORK/DATA CONNECTION (Refer to post below to overcome this issue)
GOOGLE DRIVE FOLDER TO DOWNLOAD THE ROM AND RECOVERY TOOL​
STABLE RELEASES:
Version V4.52 Android Version 5.1.1 (with updated UI 5.0)
OFFICIAL STOCK INTERNATIONAL VERSION (CHINESE NUBIA):
Version V3.67 Android Version 5.1.1
NUBIA Z9 MINI ELITE (3G RAM):
Version V4.02 Android Version 5.1.1 (with updated UI 5.0)
RECOVERY TOOLS:
TWRP 3.0.0-0.1 (ENG/CN) (Credits to romxz.cn)
RESTORE TOOL:
Nubia Restoration Tool(Chinese) ---> Use this tool to restore the bricked Nubia devices. Works on all Nubia Devices.
GUIDE TO INSTALL CUSTOM RECOVERY + CUSTOM ROM:
REQUIREMENTS:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding.
2. Working Windows PC with ADB Drivers installed - without proper installation of drivers the process will not be successful.
STEPS:
(If you need only Custom Recovery, then follow the steps from 2 to 7, other steps you can skip)
1. Download the required zipped Custom ROM and copy it to the root directory of External SD card or Internal SD card.
2. Download the Recovery Tool exe file from the link above.
3. Enable USB debugging mode. ("Menu Button" >> System settings(Settings) >> About phone(On the phone) >> Tap 6 times on Build number>>"Back button">> More >> Developer options >> Enable USB Debugging)
4. Connect the phone to the PC.
5. Execute downloaded Recovery Tool exe file.
6. In PC, new window will open. Input your choice of Recovery accordingly. (Allow the Authorization Request in the phone)
7. Follow the steps on-screen until all completes.
8. If the Custom Recovery was flashed successfully, you will get TWRP recovery menu.
9. Perform wipe data/factory reset and wipe cache partition.
10. To flash the firmware: Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the ROM, external or internal >> Select Custom ROM >> Flash selected ROM.
11. Wait until you get the confirmation of successful flashing.
12. Reboot the phone by selecting "reboot system now".
13. DONE. (Initial boot may take some time so have patience.)
STEPS TO GET DATA WORKING ON 5.1.1 BASED STOCK ROM's (If you have flashed Chinese Version in International Version)
Original Source: 4pda.ru Forum and Thanks to JohnMcClane, im190610, олежек1975, Апостол666, Lepi, isnest, alexonik, kakawkin
Compiled and updated bypradipsoman
1. First ensure that you are on a Nubia factory ROM. Download NubiaTools and jd_gsm_3.61.zip from this Link
2. Enable USB debugging on your phone and enable RSA security key box shown, when connected to your PC.
3. Type the following code on the Dialer: *#7678#
4. You will see two blank boxes open up. Tick both boxes you see.
5. Now install this driver on your windows 7 with your mobile kept on.
6. Once this serial port driver is installed check it on your Device manager-Ports settings. It should show USB Diagnostic MDM port. Also see that the driver is installed WITH THE PHONE ON and not off. If you power off and press power-volume-up/down etc. the wrong driver gets installed automatically which will not work. This is the most important step in this whole process. No correct driver and you can't get NubiaTools to work.
7. Go to the Properties of the port and the tab Port Settings in the upper value of exhibiting 115200 bps.
8. Now start Nubia tools on your PC. Before that disable any antivirus programs like NAV as it will give a false alarm on Worm/Trojan detection as soon as you run the NubiaTools file.
9. Select Tools / Settings. Set baud rate as 115200
10. Select back up and press Settings tab in backup, and set baud rate as 115,200
11. Once your Nubia shows up in the Port field, Press START to choose the place where to save the file QCN and click Start All on the panel. After a small amount of time you have your QCN backup.
12. Check if the QCN file has been backed up at the location you chose to.
13. Now follow the directions in the zip file contents to flash the patch files inside the jd_gsm_3.61 zip file (use patch.bat file. Your mobile and PC should be connected and communication enabled in ADB mode.). If it gives error then copy the patch files directly to the root directory of SD card and run the batch file.
14. Now using Nubia tools use Restore to restore the QCN file to your mobile. (Forgetting this step will leave your phone without IMEI)
15. Now you can do a reboot and you will have Data enabled for 5.1.1 based Nubia factory ROM’s and also the unstable Data issue with 3.14 to 3.20 Rom’s also would be rectified.
USEFUL TIP:
If the device is not responding or having black screen, press "Power Button+Vol up+Vol Down" together for sometime until the device vibrates.
The device will boot up automatically.
For Other Custom ROMs you may check these sites. (May require translator as these sites are not in English)
Mod edit: Links removed.

Thanks Navin.. Is it possible that we can get OTA updates on this ROM..??

thanks......go ahead

Would this give me access to move apps to the sd card. I am also having issues bluetoothing files from pc to phone, no root access.

2551990 said:
Thanks Navin.. Is it possible that we can get OTA updates on this ROM..??
Click to expand...
Click to collapse
No.. I have removed the OTA applications...however OTA update will not work as it will check all the stock applications but I have removed/deleted some of the stock applications...

Shell820810 said:
Would this give me access to move apps to the sd card. I am also having issues bluetoothing files from pc to phone, no root access.
Click to expand...
Click to collapse
This ROM is already rooted so you will have access to root shell...

navin_n said:
This ROM is already rooted so you will have access to root shell...
Click to expand...
Click to collapse
Still having the same issues after installing your ROM
1: no option to move apps to SD card
2: when I Bluetooth file from PC to phone " cannot make subfolders in the devices root folder"

navin_n said:
No.. I have removed the OTA applications...however OTA update will not work as it will check all the stock applications but I have removed/deleted some of the stock applications...
Click to expand...
Click to collapse
Thanks for the reply buddy.. I was hoping if you can point me in the right direction here.. I know there is an unofficial CM 12 ROM for Z9 mini..
have you used it..? how about any MIUI ROMs that are there for the Z9 mini.. Can you provide a link for the same... More interested in the MIUI prospect though..

2551990 said:
Thanks for the reply buddy.. I was hoping if you can point me in the right direction here.. I know there is an unofficial CM 12 ROM for Z9 mini..
have you used it..? how about any MIUI ROMs that are there for the Z9 mini.. Can you provide a link for the same... More interested in the MIUI prospect though..
Click to expand...
Click to collapse
I have not used any other ROMs ... but in the Chinese forum, they have good reviews for MIUI ROM...and says its stable.... Download link for Z9 Mini MIUI ROM
Alternative links for MIUI ROMs: (From 4pda.ru)
Link-1
Link-2
Cynogenmod/Mokee/Others Download Links:
CYNOGENMOD 12.1
YIOS Beta1 for Nubia Z9 Mini Android 5.1.1
Sudamod Android 5.1.1
Mokee Android 5.1.1

Shell820810 said:
Still having the same issues after installing your ROM
1: no option to move apps to SD card
2: when I Bluetooth file from PC to phone " cannot make subfolders in the devices root folder"
Click to expand...
Click to collapse
I know there are still no many bugs in official ROM ... hope it will be modified/added/optimized in coming builds....

Awesome
Skickat från min LG-H815 via Tapatalk

navin_n said:
I know there are still no many bugs in official ROM ... hope it will be modified/added/optimized in coming builds....
Click to expand...
Click to collapse
Navin, is it possible to have a unroot.zip package as I use the phone for my office emails using airwatch. Airwatch checks for root and says compromised device. If possible, I would like to install your rom and then run the unroot.zip to remove root. Also appreciate if you could have a small writeup on how to install back the stock ROM. Thanks much in advance!!

@shahulvm..its easy....just open SuperSu ....in settings there is a option for full unroot...

Any reason why this or sd card not showing up as drives in my computer
Edit to add.sorted , just needed to change USB mode

navin_n said:
I have not used any other ROMs ... but in the Chinese forum, they have good reviews for MIUI ROM...and says its stable.... I will give you my baidu drive link to download the stable MIUI ROM.
Download link for Z9 Mini MIUI ROM
Alternative links for MIUI ROMs: (From 4pda.ru)
Link-1
Link-2
Cynogenmod/Mokee/Others Download Links:
CYNOGENMOD 12.1
YIOS Beta1 for Nubia Z9 Mini Android 5.1.1
Sudamod Android 5.1.1
Mokee Android 5.1.1
Click to expand...
Click to collapse
Cool stuff bro..thanks for the links..!!!!!
I hope you keep updating the community with latest ROMS for the Z9 mini )

vodafone 2g 3g internet data not works on your ver 3.10 rom
---------- Post added at 01:50 PM ---------- Previous post was at 01:49 PM ----------
any solution to works data network on your rom

vijay2 said:
vodafone 2g 3g internet data not works on your ver 3.10 rom
---------- Post added at 01:50 PM ---------- Previous post was at 01:49 PM ----------
any solution to works data network on your rom
Click to expand...
Click to collapse
This is pure stock ROM... I just added Gapps and root... so i am not sure why it didn't work...
Try creating the APN for Vodafone manually.. I guess it will work... coz i don't have any issue with the data service...

i already created apn...also contacted the vodafone custemer care...all methods tried....also put miui6 and cynogen apn.xml on root folder system/etc/apn.xml ...but nothing works......on the rom miui runs well..also cynagon rom runs very well...but chines stock roms give me problems......i didnt like miui 6 rom because its laggy....camera not works on rom....i

in indian rom we can switch network on both sim cards but in this 3.10 build we cant switch network mode on both sim only sim one supports network mode switch

hydronoide said:
in indian rom we can switch network on both sim cards but in this 3.10 build we cant switch network mode on both sim only sim one supports network mode switch
Click to expand...
Click to collapse
its becoz v3.10 is not meant for indian market... beside it supports all networks GSM/CDMA/TD-SCDMA ..... unlike indian networks.. so this is little different...

Dual Boot Patcher for Zuk Z2 Pro

Hey guys, Dual Boot Patcher for the Zuk Z2 Pro is officially supported! Check it out here!
Here's the guide:
First of all download these files from here:
DualBootPatcher.apk;
DualBoot tilities.zip;
DualBootPatcher for Windows (only if you want to patch files from windows instead of Android).
Important: Copy DualBootUtilities.zip into your internal memory because if something goes wrong you can "save" your phone thanks to it via recovery.
Install DualBootPatcher.apk;
Open it and give the root permission;
You will be asked to set the kernel in order to use it, confirm of course;
Now you have to tap on "Patch zip file";
After that select the FAB button than "Add flashable zip" and navigate to add the ROM/file that you want to patch;
You have to select the right device and choose "Dataslot" giving a name to the ROM;
Once is done you're ready to install you ROM/file;
Go to ROMs section and again click on the FAB button, "+" and than "Add patched file" and navigate to add the file that you've just patched;
"Keep Location" at the new prompt;
Now just tap on the tick on the top to start. At the end you will have the last 3/4 rows in green with return "0". Return 0 means "everything is ok";
Click on the ROM you want to boot the phone and reboot;
If something goes wrong you can use DualBootUtilities.zip to switch to your primary rom.
Reboot into recovery (press and hold the power button for 15 seconds);
Select recovery and than navigate and find "DualBootPatcher" that you have already copied to your internal memory and install it;
You will have an AROMA Interface to manage everysingle part of your ROMs;
Code:
[url]https://tlgur.com/d/MGanXyEg[/url]
(I noticed that AROMA interface is overturned, if you've got the same bug you have to try to get the right button on the screen via the volume buttons and power button).
Go next and select your primary ROM;
Code:
[url]https://tlgur.com/d/p8DkWkX4[/url]
Than select and press on "Switch to";
Code:
[url]https://tlgur.com/d/74yyryn4[/url]
Now, just click next until finish;
Code:
[url]https://tlgur.com/d/q8leDoyG[/url]
Reboot your device and you're ok.
Code:
[url]https://tlgur.com/d/MGanXyEg[/url]
Q&A:
Q: How can I update my primary ROM?
A: Just patch the file and select "PrimaryROM Updgrade". Flash it.
Q: How can I flash gapps on my secondary ROM?
A: Patch the gapps using as location "Dataslot" with the correct name that you've got for the ROM.
Q: How can I flash Xposed/Magisk on my secondary ROM?
A: Patch the file using as location "Dataslot" with the correct name that you've got for the ROM.

lucaam said:
Do you want a guide to use it?
Click to expand...
Click to collapse
Yes, please
Inviato dal mio Z2 Pro utilizzando Tapatalk

Works great. I'm on Lineage 13 and MIUI 8
Sent from my Z2 Pro using Tapatalk

HOLY CRAP WHERE WAS THIS ALL MY LIFE (or at least the last few months)?!
Instead of losing HOURS and HOURS out of my life just trying to finish running Titanium backups, TWRP backups, copying to computer, rebooting EDL, QFIL firehosing, waiting for ZUI boot, rebooting bootloader, reinstalling TWRP, installing a custom rom, GApps, Magisk/SuperSU/whatever, signing back into Google, doing settings and disabling built-in Chinese crapware, etc. OVER and OVER again... I can just patch the installer and make a new Data Slot? And switch back to ZUI as primary when it's time to get back to work? This is wonderful! Not quite a VM as far as sandboxing it, but still; such a timesaver!
I've never even seen it before, but patching a couple ROMs (AICP June 3 - Magisk removed from zukfans.eu and Mokee 712 June 6), osmosis' UnSU script, OpenGapps current pico release, and current SuperSU, checking free space, creating two Data slots, installing the ROMs with working Gapps and SuperSU into Data Slots 1 & 2, booting both, signing in to my Google account, and getting DBP loaded into both of them so I could switch around between testing environments and going back to ZUI as Primary ROM took all of about an hour and a half.
Daaaaang!
_____
Update: One obnoxious thing - you'll lose your PIN/fingerprint lock once you switch back to primary. As in, you'll put in the correct PIN, and it won't take it, and I presume won't let you in with fingerprint either; same as if you restore a nandroid backup with device protection enabled. To fix: via ADB or custom recovery file manager, you need to delete /data/system/locksettings.db (thanks to @srnoth via this post ).

That's correct, but only happens once when you install a secondary ROM and then switch back to your primary. Switching between the two works flawlessly afterwards. App Sharing works wonderfully. Apk has to be installed on both systems and the option has to be enabled both times. Then the same directory is used across the two systems.
Sent from my Z2 Pro using Tapatalk

Does anybody know how to install Xposed SDK into secondary ROM?
Sent from my ZUK Z2121 using Tapatalk

Great work!
Can we install two stock like: Android 6 in primary and Android 7 as seconde boot?
Thanks !

ZaK512 said:
Great work!
Can we install two stock like: Android 6 in primary and Android 7 as seconde boot?
Thanks !
Click to expand...
Click to collapse
Just added guide.

Can´t flash Lineage 13.
lucaam said:
Just added guide.
Click to expand...
Click to collapse
Can´t flash Lineage 13.
I have AICP 7.1.2 as primary and I flash lineage 13 exactly as you writte in tutorial but when i make reboot to lineage 13 the blue light turns on and it cant boot.
Is possible to use dualboot patcher with nougat and marshmallow custom roms?

almmpt said:
Can´t flash Lineage 13.
I have AICP 7.1.2 as primary and I flash lineage 13 exactly as you writte in tutorial but when i make reboot to lineage 13 the blue light turns on and it cant boot.
Is possible to use dualboot patcher with nougat and marshmallow custom roms?
Click to expand...
Click to collapse
You can because I was on Mokee 7.1.2 and I flashed Flyme that is 6.0. Maybe the problem is the version of Lineage 13. Try another 6.0 ROM.

Thanks
lucaam said:
You can because I was on Mokee 7.1.2 and I flashed Flyme that is 6.0. Maybe the problem is the version of Lineage 13. Try another 6.0 ROM.
Click to expand...
Click to collapse
Tomorrow I try MoKee 6.01 and othe Lineage 13.
Thanks.

Can't install Xposed into secondary ROM: /system can't be mounted. Any suggestions?
Sent from my Z2 Pro using Tapatalk

I cant install Lineage 13 as second rom.
I try with AICP 7.1.2 and MoKee 7.1.2 as primary rom but the second rom Lineage 13 cant boot sstem and only light a fixed blue led.
Anybody know why it is not possible to boot?
May be i have 7.1.2 as primary and 6.0.1 as secundary is the answer for that issue.
Thanks.

if your primary ROM is android 7 based then every secondary ROM need to be android 7 based. same for primary android 6 -> secondary need to be android 6
---------- Post added at 04:36 PM ---------- Previous post was at 04:22 PM ----------
there is a multirom recovery for the zuk z2 pro avalible, too.
what is the better solution in your opinion?
with multirom i have the possibility to select the ROM when i am booting

Multirom recovery?
Where I can find it?
With that multirom TWRP is possible to have dual boot with 7.1.2 and 6.0.1 custom ROMs working?

you'll find it on zukfans*eu and NO it is NOT possible to use 7.1.2/6.0.1 together. its because of the used modem etc. images ...

m45k said:
you'll find it on zukfans*eu and NO it is NOT possible to use 7.1.2/6.0.1 together. its because of the used modem etc. images ...
Click to expand...
Click to collapse
How can you explain 7.1.2 as primary and flyme based on 6.0 as secondary?

It's not possible. Even if this question is asked a thousand times

Has anybody tried wiping and reinstalling their primary room? I have some issues on my primary so I have to do a clean reinstall.
Also, is app sharing possible with multi rom TWRP?
Sent from my Z2 Pro using Tapatalk

Hi!
- Is possible to have the zui as primary rom and another custom as secondary?
- The custom roms as more time of battery?
Thanks

MM2 Android 10 Ported Booting Rom

Android Version : MM2_A10_PORT_REV_Q Easy recovery install.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information / files available on different websites into this thread, I have patched together with cyber spit, bubblegum, and tape, for a pretty much fully working MM2_A10_PORT_REV_Q running rom. With the help from Mohzuned. I have removed what I believe to be all of the bloat. We worked to modify a working pie vendor. Magisk 19.5 installer is all ready included as well as the modified boot for root access.
All Credit goes to respective developer/s. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following two files to Test Android 10 / Q on Mi Max 2 (Oxygen). This ROM recovery is ported from the Xiaomi RedMi with many patches and customized from various sources. This ROM maybe Stable enough for your daily use on Mi Max 2. I have access to two MM2 4/64 Global versions using a 1tb sd card one on At&t the other on Tmobile and MOST features I need are currently working.
1a. Treble Mi Max 2 Recovery 3.2.1 https://androidfilehost.com/?fid=5862345805528056270
1b. OrangeFox Recover 10
https://sourceforge.net/projects/ora...n.zip/download
2. MM2_A10_PORT_REV_Q
https://drive.google.com/folderview?id=1KfWqQmi7bN_yXZfgVzxiifWuS2jDozCr
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Data, Cache, and Dalvick cache.
Second step:
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use extract tool for android or pc then copy paste to recovery backup folder.)
Third step:
Click Restore and Select System, Boot, Vendor and Swipe to confirm. Wait for restore to complete. If any errors, Reboot recovery and try again. Or Mount the System, Vendor, Boot and try again. After Restore completes Reboot. Please allow 1-2 Minutes for first boot.
Fourth step:
Flash Gapps , If you want.
What works:
Cell Service, Wifi 5ghz/2.4ghz, HW buttons. * Sound Fixed *
What doesn't work:
We will find out. Fixes and various a10 roms should be popping up soon from Scissordragonboy & Others
Guys, this is far from perfect Android 10 package, But now the door is opened for our lovely Xiaomi Mi Max 2 (Oxygen) for future updates.
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this ROM more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb max at any one given time, So if you would like to make the recovery image into a flashable zip, I'd be happy to update/add it.
If you can afford it, Im trying to save for a computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits. With this we should be able to have many fully functioning android Q in the near future.
Credits : liammc83 | Mohzuned
Original Pie Kernel Source - Hardrock83 (RIP) | beingtejas v5
Any Others Who May Have Been Missed
Best of Luck and Happy Flashing )

Thank you for first android-10 ported rom

Thanks for this will flash now
---------- Post added at 05:29 AM ---------- Previous post was at 04:55 AM ----------
shingers5 said:
Thanks for this will flash now
Click to expand...
Click to collapse
asking for password to boot android???? do i need to wipe before boot as asking for password

Great the first Q os for our lovely MM2, Would love to try it, but can you give a link for gapps cuz it's not available in opengapps.org.
Thanks for all the effort.

shingers5 said:
Thanks for this will flash now
---------- Post added at 05:29 AM ---------- Previous post was at 04:55 AM ----------
asking for password to boot android???? do i need to wipe before boot as asking for password
Click to expand...
Click to collapse
You will need to format internal storage. And also sound is not working.

Thankyou excellent work!
Where is the source code?

liammc83 said:
Android Version : MM2_A10_PORT_REV_Q Easy recovery install.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information / files available on different websites into this thread, I have patched together with cyber spit, bubblegum, and tape, for a pretty much fully working MM2_A10_PORT_REV_Q running rom. With the help from Mohzuned. I have removed what I believe to be all of the bloat. We worked to modify a working pie vendor. Magisk 19.5 installer is all ready included as well as the modified boot for root access.
All Credit goes to respective developer/s. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following two files to Test Android 10 / Q on Mi Max 2 (Oxygen). This ROM recovery is ported from the Xiaomi RedMi with many patches and customized from various sources. This ROM maybe Stable enough for your daily use on Mi Max 2. I have access to two MM2 4/64 Global versions using a 1tb sd card one on At&t the other on Tmobile and MOST features I need are currently working.
1a. Treble Mi Max 2 Recovery 3.2.1 https://androidfilehost.com/?fid=5862345805528056270
1b. OrangeFox Recover 10
https://sourceforge.net/projects/ora...n.zip/download
2. MM2_A10_PORT_REV_Q
https://drive.google.com/folderview?id=1KfWqQmi7bN_yXZfgVzxiifWuS2jDozCr
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Data, Cache, and Dalvick cache.
Second step:
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use extract tool for android or pc then copy paste to recovery backup folder.)
Third step:
Click Restore and Select System, Boot, Vendor and Swipe to confirm. Wait for restore to complete. If any errors, Reboot recovery and try again. Or Mount the System, Vendor, Boot and try again. After Restore completes Reboot. Please allow 1-2 Minutes for first boot.
Fourth step:
Flash Gapps , If you want.
What works:
Cell Service, Wifi 5ghz/2.4ghz, HW buttons.
What doesn't work:
We will find out. Fixes and various a10 roms should be popping up soon from Scissordragonboy & Others
Guys, this is far from perfect Android 10 package, But now the door is opened for our lovely Xiaomi Mi Max 2 (Oxygen) for future updates.
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this ROM more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb max at any one given time, So if you would like to make the recovery image into a flashable zip, I'd be happy to update/add it.
If you can afford it, Im trying to save for a computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits. With this we should be able to have many fully functioning android Q in the near future.
Credits : liammc83 | Mohzuned
Original Pie Kernel Source - Hardrock83 (RIP) | beingtejas v5
Any Others Who May Have Been Missed
Best of Luck and Happy Flashing )
Click to expand...
Click to collapse
Oh, great man.

After flashing successful working fine but while phone on but screen is off charging screen not showing,
Sounds are not working. Ringtones not working. Fingers print not tested.
Flashing 10 gaps working fine but camera not installed so used another camera app but not working. Camera screen is black I think camera hardware not contact to app.
Fast charger super charging work fine.
Android system security not work, like miui 11.
Com.quailcom what it is not remember but stop often.
Else Appearance is good speed is Good all over good.
---------- Post added at 09:49 AM ---------- Previous post was at 09:42 AM ----------
And here is working Gapps for Android 10 (every Android 10 ROM supported)
Author: siba
File size: 173.27 MB
Updated: September 25, 2019
Categories: openGaps 10 GApps
https://www.cyanogenmods.org/downloads/nano-open-gapps-for-android-10-arm64/#

Well tested for a brief time as I had to go out, fingerprint isn't working, torch isn't working, no sounds at all ( sounds work fine in earphones). Rest will test later and will report back

I tried to install it.
But not getting on how to install it.
Can anyone brief about the installation process using recovery?
Thank you

sinhapratik.11136 said:
I tried to install it.
But not getting on how to install it.
Can anyone brief about the installation process using recovery?
Thank you
Click to expand...
Click to collapse
Download the zip, extract it, then go to orange fox recovery and make a backup of your current rom. Then boot your current rom and copy the extracted file into Fox>backup>folder>another folder then delete the existing files and paste the copied files and then from the recovery restore the backup.

Na just format data and all good now. ROM still there but all save data gone yes. Working OK for now still too buggy for everyday use but a step in the right direction
---------- Post added at 04:00 PM ---------- Previous post was at 03:56 PM ----------
Recovery and back up your old ROM on micro SD card not internal storage. Format data as need clean partition to flash this or will get password at boot. Extract ROM zip on PC and copy to backup folder in twrp on phone. Then wipe all as stated restore as stated and it will boot

ridershahmir said:
Download the zip, extract it, then go to orange fox recovery and make a backup of your current rom. Then boot your current rom and copy the extracted file into Fox>backup>folder>another folder then delete the existing files and paste the copied files and then from the recovery restore the backup.
Click to expand...
Click to collapse
Thank you for explaining.

1.flashlight doesn't work
2.sometimes so buggy that it restarts automatically.
3.battery led not working.
4.speaker not working.
5.add apps like phone of google
6. Alarm not working

@shivanshgoel said:
1.flashlight doesn't work
2.sometimes so buggy that it restarts automatically.
3.battery led not working.
4.speaker not working.
5.add apps like phone of google
6. Alarm not working
Click to expand...
Click to collapse
Sorry, this is just a hobby, as I retired my mm2s due to missing USA frequency bands.
1> https://play.google.com/store/apps/details?id=cz.nowi.whitescreen like the old android days
2>haven't experienced
3>Not needed, I have a light on my cord.
4>Try headphones ( I haven't, But some report they work )
5>Flash gapps, or install what you like.
6>I don't use phone alarms, If I'd need one, I use my smart watch, or Id use alexa.
Keep in mind most phones don't have a booting A10,
I did what I could on an ancient Asus 901 eee pc netbook.
When time and system resources permit, I will try to fix it up a bit.
But honesty relying on our friend, Mohzuned (Scissordragonboy) , when he finds time, He has access to a super computer, But also he's working on many projects.
Let's all wish him well.

liammc83 said:
Sorry, this is just a hobby, as I retired my mm2s due to missing USA frequency bands.
1> https://play.google.com/store/apps/details?id=cz.nowi.whitescreen like the old android days
2>haven't experienced
3>Not needed, I have a light on my cord.
4>Try headphones ( I haven't, But some report they work )
5>Flash gapps, or install what you like.
6>I don't use phone alarms, If I'd need one, I use my smart watch, or Id use alexa.
Keep in mind most phones don't have a booting A10,
I did what I could on an ancient Asus 901 eee pc netbook.
When time and system resources permit, I will try to fix it up a bit.
But honesty relying on our friend, Mohzuned (Scissordragonboy) , when he finds time, He has access to a super computer, But also he's working on many projects.
Let's all wish him well.
Click to expand...
Click to collapse
Why don't you guys both share that server computer?

sinhapratik.11136 said:
I tried to install it.
But not getting on how to install it.
Can anyone brief about the installation process using recovery?
Thank you
Click to expand...
Click to collapse
First install OrangeFox Recover 10
https://sourceforge.net/projects/ora...n.zip/download
then press file which you want to install like this rom and open as backup its will work

I can not install it by xiaomi max2.
It looks like not good.

hiein521 said:
It looks like not good.
Click to expand...
Click to collapse
Write us an update kernel/vendor yourself, or donate cash towards a computer and it would look better..... FASTER.
In the meantime, consider having patience, most older systems don't even have android 10 booting with RIL. And you realize we don't get paid for our time.
Its comments like this and similar, that make people quite.
Ask hardrock83, beingtejas.....pffft
News update:
Android 10 from original source is being worked on.

hiein521 said:
It looks like not good.
Click to expand...
Click to collapse
For free stuff either be thankful or please be quiet guys. I don't want another good dev to quit the work. Love hardrock beingtejas and liammc83 [emoji3590]
Sent from my Mi Max 2 using Tapatalk