A friend of mine accidentally soft bricked his S3 I9305T (Telstra Version) trying to root it. Does anybody know where I can find the firmware for this exact phone? Or can normal I9305 Firmware be flashed?
Thanks
If someone could confirm that standard I9305 FW can be flashed that would make this a lot easier.
Singularity_iOS said:
If someone could confirm that standard I9305 FW can be flashed that would make this a lot easier.
Click to expand...
Click to collapse
Go to sammobile.com. They have the stock 4.3 firmware for this phone(i9305T)
noppy22 said:
Go to sammobile.com. They have the stock 4.3 firmware for this phone(i9305T)
Click to expand...
Click to collapse
Do you not know anywhere else maybe? The connection there is extremely slow (top of about 50kb/s) and sometimes fails. I will try again.
Singularity_iOS said:
Do you not know anywhere else maybe? The connection there is extremely slow (top of about 50kb/s) and sometimes fails. I will try again.
Click to expand...
Click to collapse
Yeah it is slow, you can pay for membership which speeds it up, but I usually leave it overnight to download. You can try samsung-updates.com as well but I think it is much the same.
Singularity_iOS said:
A friend of mine accidentally soft bricked his S3 I9305T (Telstra Version) trying to root it. Does anybody know where I can find the firmware for this exact phone? Or can normal I9305 Firmware be flashed?
Thanks
Click to expand...
Click to collapse
Yes regular i9305 firmware can be flashed although being Telstra it won't have very good reception as the frequencies are different with Telstra. Flashing a Telstra modem after will help.. Also factory reset is usually a must if flashing stock software
Sent from my GT-I9305 using XDA Free mobile app
winxuser said:
Yes regular i9305 firmware can be flashed although being Telstra it won't have very good reception as the frequencies are different with Telstra. Flashing a Telstra modem after will help.. Also factory reset is usually a must if flashing stock software
Sent from my GT-I9305 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I ended up getting the FW after about 4 failed downloads. Flashed the correct I9305T firmware (although not the Telstra exact variant, i'd assume it doesn't matter)
Related
hey all, just wondering if the GT-I9305 and the GT-I9305T are the same or not, and whether the GT-I9305 stock firmware is transferable over to the GT-I9305T. :laugh:
Do you mean the Telstra GSIII LTE?
Do you mean the Telstra GSIII LTE?
If yes, then try asking Telstra, though probably they won't give an answer.
I believe they might not be compatible because Telstra has history of modifying models,
both hardware and software, which compromised the phone experience under other carriers.
And assume they are compatible, then why it is named I9305T instead of I9305?
Obviously making one model is easier than making an I9305 and another version with a "T".
So, I guess you probably should not try the firmware for another version of the GSIII LTE until you get a CLEAR answer
Good Luck!
NevErSn0w said:
hey all, just wondering if the GT-I9305 and the GT-I9305T are the same or not, and whether the GT-I9305 stock firmware is transferable over to the GT-I9305T. :laugh:
Click to expand...
Click to collapse
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
NevErSn0w said:
hey all, just wondering if the GT-I9305 and the GT-I9305T are the same or not, and whether the GT-I9305 stock firmware is transferable over to the GT-I9305T. :laugh:
Click to expand...
Click to collapse
As far as I know they are exactly the same aside from slight software differences. I've got a GT-I9305 bought from Kogan which is a Hong Kong version. In stock form it worked on the Telstra network but the signal strength was not all that great and it use to drop of the network on odd occasion which required a restart in some case to reconnect. I got a bit tired of it so I flashed it with the official Telstra ROM last Friday. So far everything is running great, signal strength is as expected and it did not drop of the network at all since the re-flash.
All I can say now my phone is now a GT-I9305T and it works as it should :good:
awesome, thats great to know.
i was also doing some searching on the internet earlier today and realized that my s3 ( GT-I9305T) was only running the 4.1.1 version of android and that the GT-I9300 was updatable to 4.1.2, i then went on to check for an update which came back unsuccessful saying that i had the latest version of firmware, i understand that they are releasing it model by model but does anyone have any idea on whether the GT-I9305T will get the update? and also any estimate on when?
MrM77 said:
As far as I know they are exactly the same aside from slight software differences. I've got a GT-I9305 bought from Kogan which is a Hong Kong version. In stock form it worked on the Telstra network but the signal strength was not all that great and it use to drop of the network on odd occasion which required a restart in some case to reconnect. I got a bit tired of it so I flashed it with the official Telstra ROM last Friday. So far everything is running great, signal strength is as expected and it did not drop of the network at all since the re-flash.
All I can say now my phone is now a GT-I9305T and it works as it should :good:
Click to expand...
Click to collapse
Where did you get the stock telstra firmware? cheers
bretto_aus said:
Where did you get the stock telstra firmware? cheers
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/?page=3&model=GT-I9305T&pcode=TEL&os=1&type=1#firmware
there's the 4.1.1 stock telstra firmware.
cheers
txr33 said:
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
im wondering can istill root my devise its the gt-i9305t but it runs kitkat 4.44
just quickly hat do u mean by i9305t modem i dont understand
txr33 said:
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
thought id repeat myself since i dont know where to write my reply.i dont understand what you mean by using "i9305t modem". i always just thought a modem was a modem nessassary for internet?
---------- Post added at 08:18 AM ---------- Previous post was at 08:12 AM ----------
txr33 said:
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
ZachariahZ said:
Do you mean the Telstra GSIII LTE?
If yes, then try asking Telstra, though probably they won't give an answer.
I believe they might not be compatible because Telstra has history of modifying models,
both hardware and software, which compromised the phone experience under other carriers.
And assume they are compatible, then why it is named I9305T instead of I9305?
Obviously making one model is easier than making an I9305 and another version with a "T".
So, I guess you probably should not try the firmware for another version of the GSIII LTE until you get a CLEAR answer
Good Luck!
Click to expand...
Click to collapse
here do you find out excately what model phone it is mine syas in different places Samsung galaxy s3 GT-i9305t 4g/telstra, how do i found out if it is LTE?
binga517 said:
here do you find out excately what model phone it is mine syas in different places Samsung galaxy s3 GT-i9305t 4g/telstra, how do i found out if it is LTE?
Click to expand...
Click to collapse
Gt-i930[5] = lte(4g)
gt-i930[0] = regular 3g model
Reply and question
Hey m8 thanks for reply could u point direction to how to root my phne
https://forum.xda-developers.com/ga...msung-galaxy-s3-unified-toolkit-v8-0-t1703488
Search the XDA forums all the information you want is there already. Also remember to do a Nandroid backup.
question
MrM77 said:
As far as I know they are exactly the same aside from slight software differences. I've got a GT-I9305 bought from Kogan which is a Hong Kong version. In stock form it worked on the Telstra network but the signal strength was not all that great and it use to drop of the network on odd occasion which required a restart in some case to reconnect. I got a bit tired of it so I flashed it with the official Telstra ROM last Friday. So far everything is running great, signal strength is as expected and it did not drop of the network at all since the re-flash.
All I can say now my phone is now a GT-I9305T and it works as it should :good:
Click to expand...
Click to collapse
my phone is model no: S3 GT-I9305T 4G teltra modified, Android version 4.4.4 kitkat, Baseband Version I9305TDVUEOK1 i have been having trouble finding it correct CF-Auto-Root file. would you know of a site where i could find this. thanks my name is binga517
---------- Post added at 02:31 PM ---------- Previous post was at 02:16 PM ----------
Phone model GT-I9305T 4G telstra modified
Android version 4.4.4 kitkat
Baseband version I9305TDVUEOK1
Build number KTU84P.I9305TDVSEQA1
Kernal version 30.31-6186118 [email protected]#1
SE for Android Status: Enforcing SEPF_GI9305T_4.4.4_0048
Please can someone help me to find the correct CF-Auto-Root file. or since i would like to at least upgrade it to lollipop 5 can i use another file, im such a newbie i only learnt about unzipping couple days ago. PLEASE HELP
binga517 said:
my phone is model no: S3 GT-I9305T 4G teltra modified, Android version 4.4.4 kitkat, Baseband Version I9305TDVUEOK1 i have been having trouble finding it correct CF-Auto-Root file. would you know of a site where i could find this. thanks my name is binga517
---------- Post added at 02:31 PM ---------- Previous post was at 02:16 PM ----------
Phone model GT-I9305T 4G telstra modified
Android version 4.4.4 kitkat
Baseband version I9305TDVUEOK1
Build number KTU84P.I9305TDVSEQA1
Kernal version 30.31-6186118 [email protected]#1
SE for Android Status: Enforcing SEPF_GI9305T_4.4.4_0048
Please can someone help me to find the correct CF-Auto-Root file. or since i would like to at least upgrade it to lollipop 5 can i use another file, im such a newbie i only learnt about unzipping couple days ago. PLEASE HELP
Click to expand...
Click to collapse
Have you tried this search?
https://www.google.de/search?hl=de&...0...1.1j2.64.psy-ab..0.2.341....0.hub_oipjIe0
I guess you will find help in one of the search results
First of all download Samsung USB Drivers: https://drive.google.com/open?id=1I3ilHBfl1lSvkqQwHZTEOE6usggQqQGb
Download TWRP for GT-I9305T: https://drive.google.com/open?id=1kmpXSVGdd_XR2WojWqAe8rd_Xm7gZ8Lj (its an old version of twrp but it should work)
After downloading twrp download Odin3: https://drive.google.com/open?id=10CLH6TqF6PLiqnMnjqY5IgsfU5KjX-F-
Extract it od desktop
Now power off your s3 and boot into download mode holding Power Button + Volume Down + Home Button
You will see that screen turned on and press Volume up to continue into Download mode
Connect your s3 into your pc via usb cable. Open Odin3 and you will see on the left side message that says Added!!
Now click od the AP button and select twrp that you downloaded
Go to options tab and make sure that Re-Partition is unticked, Auto-Reboot and F. Reset Time keep ticked
Finally click Start button and the twrp should flash, you will see green text saying PASS!
After flashing twrp the phone should automatically reboot, download SuperSU: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
Turn off the phone again and hold Power Button + Volume Up + Home Button and it should boot into twrp, swipe to allow system modifications, and select install and find the supersu.zip file, select it and swipe to confirm flash.
After reboot your s3 should be rooted. You will have SuperSU app in the menu.
This. Is my first post I'm trying. To root my telstra 9305t lte .I'm led to believe telstra firmware is different to the norm . Can someone please help it would be much appreciated thanx
banjomike said:
This. Is my first post I'm trying. To root my telstra 9305t lte .I'm led to believe telstra firmware is different to the norm . Can someone please help it would be much appreciated thanx
Click to expand...
Click to collapse
When I was rooting i9305 I rooted it with the i9300 Odin package wouldn't recommend trying this maybe I was just lucky I sopposs but down the i9305t Odin package and flash via Odin routing is complex its only a click of few bottuns
thanks
realionaire said:
When I was rooting i9305 I rooted it with the i9300 Odin package wouldn't recommend trying this maybe I was just lucky I sopposs but down the i9305t Odin package and flash via Odin routing is complex its only a click of few bottuns
Click to expand...
Click to collapse
downloaded cf auto root for my firmware thankyou for your help ill get it on odin thanx
banjomike said:
downloaded cf auto root for my firmware thankyou for your help ill get it on odin thanx
Click to expand...
Click to collapse
If you want to flash ROM's you can use any i9305 ROM and it will work fine. Your Modem however has to be a i9305T Model otherwise you will get no reception anywhere.
Thanx I didn't think of that. Rom is goin strong still
sent from my i9305 running xpower
The most easiest way to root your phone, could be (If you have an older firmware.) installing exynos abuse app from chainfire.
Sent from my GT-I9305 using xda premium
Already done thanx though
sent from my i9305 running xpower
Hello, I updated my system to 4.1.2 and rooted it so as to unlock the phone after which I found out that the only way to carrier unlock this phone is with 4.1.1
How do I safely downgrade so as to get 4.1.1? The phone is locked to 3 here in Sweden. I guess I need a Nordic version but have not found it.
I am very new to this so as detailed help as possible would be appreciated.
Model GT-I9305
Android version 4.1.2
Baseband version I9305XXBLL5
Kernel version
3.0.31-746327
[email protected]#1
Thanks
Roger
Hi..
You have to look and learn from the forum.
As a noob its dangerous to flash firmwares.
Info is provided everyware on the forum.
Its not against the law to search just breafly on the forum and google.
Google search: Downgrade i9305
Sent from my GT-I9305 using XDA Premium HD app
Because its dangerous is the reason I ask for help here and of course I have googled.And I dont find anything about swedish/nordic firmware only people downgrading in England or the States. That is why I ask the question here.
Since I have sucesfully rooted my device I dont consider myself a noob, just careful.
So instead of stating the obvious like suggesting googling, maybe point me to a proper firmware that I can downgrade with.
Or a thread with relevant information.
Peace
If this is what to use which file should it be? This is why I put my initial question..
Using Odin is a breeze, its something else to know what to flash with so you dont brick your device.
http://forum.xda-developers.com/showthread.php?t=1935570
Ok.. what ever..
Go to www.sammobile.com
There is where every one finds his or her firmware.
Register... goto firmware section... chose
Smartphone..android...i9305.. and the apropriet language for your phone..
The reason no one answeres this question is becaus its like telling you where to get toilet paper.
Sent from my GT-I9305 using XDA Premium HD app
Shortcut if you are unsure about witch firware you have: http://www.sammobile.com/firmwares/2/
Shortcut Swe firmware: http://www.sammobile.com/firmwares/1/?model=GT-I9305&pcode=TLA#firmware
Tigervilja said:
If this is what to use which file should it be? This is why I put my initial question..
Using Odin is a breeze, its something else to know what to flash with so you dont brick your device.
http://forum.xda-developers.com/showthread.php?t=1935570
Click to expand...
Click to collapse
Use any of stock 4.1.1, unlock it and then flash it with latest Nordic 4.1.2
I guess it must be the file from November 2012 to use with Odin for any GT-I9305 from Sweden then, regardless of carrier? Not the one from September?
This one to use?
I9305XXALK5_I9305TLAALK1_TLA.zip
So if I downgrade to 4.1.1, do the unlock procedure, then it is as easy as to upgrade to 4.1.2 again using Odin and all should be back to normal. Correct?
The carrier unlock procedure can only be done on 4.1.1
Thank you for helping out!
Ok Djembey, just saw you posted a reply and that answers the question then. Many thanks
TLA is Telia and not Nordic, NEE is Nordic. And remember to do a full wipe after changing to another CSC to get OTA updates.
Glad I checked back here, was just about to do a downgrade using TLA firmware. This feels shaky to say the least :/
On Sammobile I can only find the 4.1.2 firmware NEE,I9305XXBMA3_I9305NEEBMA1_NEE.zip, where to find the 4.1.1?
So downgrading and updating using the NEE firmwares will make sure I receive OTA in the future?
And do I need to do a full swipe both after downgrading and then again when I update to 4.1.2 after unlocking?
Many thanks!
Tigervilja said:
Glad I checked back here, was just about to do a downgrade using TLA firmware. This feels shaky to say the least :/
On Sammobile I can only find the 4.1.2 firmware NEE,I9305XXBMA3_I9305NEEBMA1_NEE.zip, where to find the 4.1.1?
So downgrading and updating using the NEE firmwares will make sure I receive OTA in the future?
And do I need to do a full swipe both after downgrading and then again when I update to 4.1.2 after unlocking?
Many thanks!
Click to expand...
Click to collapse
ANY 4.1.1 for the I9305 can be used! You will only use it for the unlock.
So is this the correct procedure?
1.Downgrade using TLA
2.No swipe
3.Unlock device
4.Upgrade using the NEE firmware
5.Then do a full swipe
Done
Thank you
CalInTheZone said:
TLA is Telia and not Nordic, NEE is Nordic. And remember to do a full wipe after changing to another CSC to get OTA updates.
Click to expand...
Click to collapse
FYI: Stock ROM NEE is for all Nordic Countries and it's better than TLA as is updated more frequently.
CSC_NEE contains settings for 34 Nordic Networks.
Btw, he's with 3 Sweden....
Tigervilja said:
Glad I checked back here, was just about to do a downgrade using TLA firmware. This feels shaky to say the least :/
On Sammobile I can only find the 4.1.2 firmware NEE,I9305XXBMA3_I9305NEEBMA1_NEE.zip, where to find the 4.1.1?
So downgrading and updating using the NEE firmwares will make sure I receive OTA in the future?
And do I need to do a full swipe both after downgrading and then again when I update to 4.1.2 after unlocking?
Many thanks!
Click to expand...
Click to collapse
Downgrade to 4.1.1 with ANY Stock ROM, unlock your phone and then use latest Nordic. "3 Sweden" is included in it.
djembey said:
FYI: Stock ROM NEE is for all Nordic Countries and it's better than TLA as is updated more frequently.
CSC_NEE contains settings for 34 Nordic Networks.
Btw, he's with 3 Sweden....
Click to expand...
Click to collapse
You can't tell me anything about the CSC's used in the Nordic countries...
djembey said:
FYI: Stock ROM NEE is for all Nordic Countries and it's better than TLA as is updated more frequently.
Downgrade to 4.1.1 with ANY Stock ROM, unlock your phone and then use latest Nordic. "3 Sweden" is included in it.
Click to expand...
Click to collapse
Like I wrote...
CalInTheZone said:
TLA is Telia and not Nordic, NEE is Nordic. And remember to do a full wipe after changing to another CSC to get OTA updates.
Click to expand...
Click to collapse
CalInTheZone said:
ANY 4.1.1 for the I9305 can be used! You will only use it for the unlock.
Click to expand...
Click to collapse
If you have nothing new to contribute why bother to post?
Tigervilja said:
So is this the correct procedure?
1.Downgrade using TLA
2.No swipe
3.Unlock device
4.Upgrade using the NEE firmware
5.Then do a full swipe
Done
Thank you
Click to expand...
Click to collapse
Right on... Except ANY 4.1.1 can be used not only TLA.
CalInTheZone said:
If you have nothing new to contribute why bother to post?
Click to expand...
Click to collapse
I've posted this before you did.
Your post just made OP confused! !!!!!!!!
djembey said:
Use any of stock 4.1.1, unlock it and then flash it with latest Nordic 4.1.2
Click to expand...
Click to collapse
djembey said:
I've posted this before you did.
Click to expand...
Click to collapse
You will need a Tardis to convince anybody about that... Because you did not... Read again..
djembey said:
Your post just made OP confused! !!!!!!!!
Click to expand...
Click to collapse
LOL... This was a joke right?
CalInTheZone said:
You will need a Tardis to convince anybody about that... Because you did not... Read again..
LOL... This was a joke right?
Click to expand...
Click to collapse
Are you blind and stupid???
Check post #6!!!!!!!
djembey said:
Are you blind and stupid???
Check post #6!!!!!!!
Click to expand...
Click to collapse
Neither... Guess it's you... And stop calling ppl names!
So either you confused Tigervilja or you were fist to answer his questions... You can't do both. So decide did you confuse or did you help? If you helped you were not first, if you were first you confused.
And if you call anybody names in the future I WILL report your posts.
CalInTheZone said:
Neither... Guess it's you... And stop calling ppl names!
So either you confused Tigervilja or you were fist to answer his questions... You can't do both. So decide did you confuse or did you help? If you helped you were not first, if you were first you confused.
And if you call anybody names in the future I WILL report your posts.
Click to expand...
Click to collapse
LOL!!! should I give you a hug?
Well, I hope you guys are out there. I succesfully downgraded to 4.1.1, unlocked phone and then started Odin to upgrade to latest NEE firmware
but the upgrade failed. Now it only starts in emergency mode and asks me to attach to Kies. Trying to run Odin again only fails.
What do I do now?
Hopeful :/
Hey guys
The Title basically sum up whats happen. i was trying to up my android to a newer version and regrettably i formatted android off the whole thing. i know i have to flash the old software back on. but im not too sure what that software is nor where i can find it. My Samsung galaxy s3 is i9305. i think my baseband is xxbll5. but i cant find much on that type of model which makes me think its not that one.. the phones from Australia and its contracted to Optus, if that helps.
Choose your firmware from sammobile or samsung-updates .
Baseband is modem not firmware .
Australia T model ???
JJEgan said:
Choose your firmware from sammobile or samsung-updates .
Baseband is modem not firmware .
Australia T model ???
Click to expand...
Click to collapse
****, yeah its a i9305t model.
the only problem im having atm is that, theres none for optus, there all for telstra. therefore different baseband.
thank u so much for replying!
****, after somemore looking its i3905 for optus
booloo9 said:
****, yeah its a i9305t model.
the only problem im having atm is that, theres none for optus, there all for telstra. therefore different baseband.
thank u so much for replying!
****, after somemore looking its i3905 for optus
Click to expand...
Click to collapse
Im from Brazil, my model is a i9305T too. But actually im using a i9305 4.3 rom and no problems so far. I cant say about 4g though, cause we actually don't have it, but i believe you can flash a i9305 rom without bloatware with a telstra baseband/modem
http://forum.xda-developers.com/showthread.php?t=1978840
May help
question
my friend thinking about to get galaxy s3 GT-I9305T but there is not 4.4.2 in australian I am wondering if I flash the Germany 4.4.4. does it still work same?
I know I have to change the language lol
http://www.sammobile.com/firmwares/download/35546/I9305XXUFNI3_I9305DBTFNI3_DBT.zip/
but problem
which phone look at GT-I9305t got not 4.4.4 but GT-I9305 got 4.4.4
Will firmware for the I9305 work on the I9305T?
carlo67 said:
question
my friend thinking about to get galaxy s3 GT-I9305T but there is not 4.4.2 in australian I am wondering if I flash the Germany 4.4.4. does it still work same?
I know I have to change the language lol
http://www.sammobile.com/firmwares/download/35546/I9305XXUFNI3_I9305DBTFNI3_DBT.zip/
but problem
which phone look at GT-I9305t got not 4.4.4 but GT-I9305 got 4.4.4
Will firmware for the I9305 work on the I9305T?
Click to expand...
Click to collapse
I think you can flash, there are people who have flashed firmware for I9305N to I9305 and works perfectly.
I think that you can install the DBT 4.4.4 version on your phone.
Just try it.
viktorak said:
I think you can flash, there are people who have flashed firmware for I9305N to I9305 and works perfectly.
I think that you can install the DBT 4.4.4 version on your phone.
Just try it.
Click to expand...
Click to collapse
Will firmware for the I9305 work on the I9305T?
Yes,my opinion is that Rom 4.4.4.DBT will works on your terminal.
viktorak said:
Yes,my opinion is that Rom 4.4.4.DBT will works on your terminal.
Click to expand...
Click to collapse
ok
can you give me link to this rom please
Hi, carlo 67,the link it's the same you posted first from Sammobile firmware updates.Flash true Odin.
viktorak said:
Hi, carlo 67,the link it's the same you posted first from Sammobile firmware updates.Flash true Odin.
Click to expand...
Click to collapse
ok
I would like to know if I flash it, does it swipe clean or just upgrade it?
i want just upgrade,
carlo67 said:
ok
I would like to know if I flash it, does it swipe clean or just upgrade it?
i want just upgrade,
Click to expand...
Click to collapse
It is always recommended to make a copy of the EFS folder and backup System.
Here:http://forum.xda-developers.com/gal...warning-guide-backup-restore-imei-nv-t1946915
is how to make backup your EFS folder,not necesary to be root.
viktorak said:
It is always recommended to make a copy of the EFS folder and backup System.
Here:http://forum.xda-developers.com/gal...warning-guide-backup-restore-imei-nv-t1946915
is how to make backup your EFS folder,not necesary to be root.
Click to expand...
Click to collapse
hey
question I got galaxy s3 I flashed the philz_touch_6.48.4-i9305.tar done ok but when I go to recovery mode but it was back to stock recovery