When I first purchased this phone I was able to boot to the default recovery that came with the phone ( which clearly had a *fastboot option*), it came with stock 5.1, and a bunch of bloatware.
I downloaded the one click root method for the h811 which was perhaps the easiest root i've ever done. great. i also had to flash my recovery to twrp 2.8 for some reason.
Rocked out to a newely rooted device on 5.1 until the t mobile bloatware and system update notification kept bugging me, so I said * eff it, i've been holding out for a while*
So I get to the cm 13 wiki for my device, I managed to install the cm recovery ( cant remember how i did this for some reason) and then i was able to flash cm13 to my phone. CM13 is sleek, and smooth but is presenting problems.
First of all, no google play store and the gapps zip wont install through cm recovery ( fails and tells me to use twrp instead which is a problem because i can't boot this phone into fastboot mode)
I am unrooted and can not figure out how to properly root a T mobile h811 running cm13, so the twrp manager doesn't work because it "requires root" then shuts down. ( enable root access in the cm13 developer options does nothing at all and yes, for adb and apps)
FAST BOOT MODE DOES NOT SEEM TO EXIST ANYMORE ON MY PHONE - Following the many tutorials, which goes long the lines of using adb/fastboot, adb devices can see my device, but fastboot devices can't ( figures) because its not in fastboot mode. Any fast boot reboot bootloader or any variant of that command only reboots the phone, to... swipe the screen.
I've installed the lg bridge crap ( which installed an updated usb driver) that doesn't even recognize my phone " no mobile device connected". tried uninstalling and reinstalling, but nothing. When putting the phone in download mode, to see if adb would rcognize it, windows sees this as a new device , installs drivers but says " device can not start, code 10 * in device manager. :silly:
is there anything that can be done?? google searches result in obvious solutions that SHOULD work but don't, or threads where a person coincidentally has the same exact problem as I do, but their response is usually the last response in the thread that goes unanswered
summary : I've install cm13 on my lg g4 h811, I do not have root access, I can not install twrp due to ( no fastboot mode) in effect, i cant install gapps, cant root phone etc..
any help?
did you ever unlock the phone....?
Yes, unlocking the phone is one of the first things you would need to do. In Developer Options > OEM Unlock. Then in bootloader, run the unlock command. This will delete /data and internal storage so back up your files so you can transfer them back via adb or fastboot.
Then you're probably going to need to temp boot TWRP, then flash the TWRP recovery image in TWRP. THEN you can flash properly.
Carefully read through this thread:
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Good luck.
Edit: oh and this thread belongs in Q&A.
Alright. Am I only to read the first post or all 30+ pages? ( not that i have a problem, just curious)
Reeeeaaadd ittt alllll! Just kidding. The first post should be fine. You'll be looking at doing everything after flashing the kdz. If you think you've messed up your partitions, flash the kdz and start over.
aoaleman said:
Reeeeaaadd ittt alllll! Just kidding. The first post should be fine. You'll be looking at doing everything after flashing the kdz. If you think you've messed up your partitions, flash the kdz and start over.
Click to expand...
Click to collapse
"ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it."
didn't work, very frustrating. any clues? on windows 8.1 by the way. tried two computers. none can see this phone. I can connect the phone to the computer and see its storage, lg usb driver is installed
You probably need to reinstall the drivers. It might be the fastboot driver. That's what worked for me.
I've reinstalled the official drivers, uninstalled them... Jusst the mobile USB driver, a combo of both, plenty of times. Don't understand why this software doesn't see my phone
Lgup, lgair, lg bridge, lg USB driver (skinned down) .. Nothing works tested on my gaming rig., and work laptop both running win 8.1 64 bit
Hey man next time you have a question just post it in the Q&A section this section is forces android development just wanted to let you know
TacoTuco said:
Hey man next time you have a question just post it in the Q&A section this section is forces android development just wanted to let you know
Click to expand...
Click to collapse
This section does get more views though haha.
Anyway I feel that the 811 is one of the more finicky devices to get into fastboot at least in my experience. I had to enable and disable dev options while plugging and unplugging device and it finally worked. No idea if that'll work for everyone though.
I reasked the question in Q and A. Please help some one.
You start over. LG bridge.
Having the same issue. I'm on Windows 10. What developer settings did you mess with to get it working, tiskewlio?
The issue i seem to be having is that when I put the device in download mode ( didnt know that is the same as fastboot) drivers attempt to install, "LGE MTP USB DEVICE" has a yellow exclamation mark with a code 10-device cannot start error message. I believe this the issue as any fastboot command stuff says " waiting for any device" . must not yet see the mtp driver .. Also noticed the bridge app immeditaley tries to pick up my device in download mode but fails due to this problem..
Any clues?
Sunaj1 said:
The issue i seem to be having is that when I put the device in download mode ( didnt know that is the same as fastboot) drivers attempt to install, "LGE MTP USB DEVICE" has a yellow exclamation mark with a code 10-device cannot start error message. I believe this the issue as any fastboot command stuff says " waiting for any device" . must not yet see the mtp driver .. Also noticed the bridge app immeditaley tries to pick up my device in download mode but fails due to this problem..
Any clues?
Click to expand...
Click to collapse
]
Make sure you are using all these files...
https://drive.google.com/folderview?id=0B_sPus48oLWYQy1MTFRBSlBxMGc&usp=sharing
thevirgonian said:
]
Make sure you are using all these files...
https://drive.google.com/folderview?id=0B_sPus48oLWYQy1MTFRBSlBxMGc&usp=sharing
Click to expand...
Click to collapse
silly question maybe, but is there a specific tutorial in getting this to work with the files provided given my situation? (commands, etc..) will this somehow bypass the the lge mobile mtp device that wont install ? I had installed the system wide adb/fastboot drivers, and already had a folder with just the minimal install of the adb but didnt have a few files in the one you provided ( lg root, busy box, etc) so not quite sure what to do with them.
Again, if possible want to flash twrp recovery to my device but can't due to * waiting for any device* and the ( device cannot start ) error
Thanks
* waiting for device* when putting phone in download mode and pushing fastboot flash twrp-2.8.7.1-h811.img.
Any help would be appreciated as I need to get the driver to work first. see attached picture.
Cha h
the issue is largly resolved as i've been able to flash the recovery and install another rom. But i'd still like to know how to get the download mode driver properly working in the event i need a computer and can't do a self contained install.
Uninstall all drivers. Reboot computer. Reinstall latest drivers and LG bridge. Reboot. Then start your process. It'll work. Trust me. Find my posts in primes stock thread. I ran into this issue myself. And if you get an error after flashing where it won't mount /data, that's because it got corrupted. Once in twrp, format /data then reboot to recovery. All will be well to flash. Just a heads up since that was also a problem.
travisd4est said:
Uninstall all drivers. Reboot computer. Reinstall latest drivers and LG bridge. Reboot. Then start your process. It'll work. Trust me. Find my posts in primes stock thread. I ran into this issue myself. And if you get an error after flashing where it won't mount /data, that's because it got corrupted. Once in twrp, format /data then reboot to recovery. All will be well to flash. Just a heads up since that was also a problem.
Click to expand...
Click to collapse
i dont know man, i did all that a million times over, but recently i was able to just flash the stock MM rom to the device using LGup. Think i'll just stick with stock rom and root for a while as all this stuff is a little finicky at times. Thanks for your help.
Phone is unloacked and S-OFF
So my phone was ONLY able to boot into recovery/bootloader.
I tried wiping my phone, but TWRP gave "Failed" message
I decided to simply continue and try flashing the ROM anyways
Phone rebooted and was stuck on the HTC logo
After a LONG time of waiting I decided to pull the battery out
Phone will not turn on, but my computer can detect it.
Also, I was unable to turn on USB-Debugging because, well no OS, and TWRP did not give an option to do so.
Edit: Update
Phone is now turning on and I am able to boot into bootloader
I am able to boot into TWRP (v2.8) now. Image of error below:
http://i.imgur.com/EGBpufh.jpg (embedding image only shows the large full size)
Unable to mount "System" partition
What are my options? I am using WinToolKit and it's not working. When I boot into fastmode (manually) my computer gives a message saying it cannot be recognized and that there may be a problem with the device.
Edit: solved my problem, thank you all for your help
Hey!
I unlocked bootloader, installed TWRP, and rooted the phone.
Now I cannot get into recovery, the screen just goes black and white led lights up. I tried to factory reset in phone settings, but it wont do nothing. I try to switch off the phone, press vol+ & plug the usb cable to do the unbrick thing, but its not responding to that either.
Fastboot oem device-info says tampered false & bootloader unlock true.
Ned help!
Assuming you have Windows on your PC, if you try to enter download mode (in order to use unbrick method), can you hear a device plugged in sound and/or see the device in Device Manager? Maybe you don't have the drivers.
If fastboot is working too (because you could type "oem device-info" and get an output), you may want to try flashing a custom kernel/ROM or TWRP once again to get it working.
Are you sure you have flashed correct files and haven't mistaken OP3T with OP3?
AFAIK everythings OP3T specific.
Now I ran msmdltool, sideloaded most up-to-date stock rom, managed to flash TWRP and magisk, everythings going smooth this far. I made backups and tried to flash RR rom, but its saying "...this device ( . ) ERROR 7" whats the deal?
*FIXED*
I read that TWRP merged OP3 & OP3T, found a proper dl link for the newest ver TWRP and manage to flash the rom.
So If someone is having same kind of problems like me and trying to figure what can go wrong when you following step-by-step guides, pay attention to details. In this case first after unbrick I forgot to sideload newest ver stock rom. This error 7 thing was a minor and easy to fix, but still can take couple of hours to figure out(find a proper dl link)
Hello everyone, it's my first time writing here, but I’ve tried everything, searched everywhere, and am desperate for help.
I screwed up big time while trying to flash a custom rom on my nem-l21, as I successfully did before with my xiaomi... So what I did:
I managed to unlock bootloader with dc unlocker. Then I got stucked flashing twrp with adb tools. Everything was looking to be fine, no error messages, “flashing successful”… But, I was never able to boot into flashed twrp. Always got stuck on “your phone has been unlocked blah blah. Your device is booting.” It never booted, not in twrp, nor in stock recovery. I tried different versions of twrp from different sources, always same result (flashing successful, booting into recovery not). Booting into the system was fine. And then I made that horrible mistake. Oh, how I wish I didn’t!!
I read on some website, that you are supposed to flash the twrp as boot.img, not as recovery.img. Seemed illogical and stupid to me, but in the end I tried it. Of course, this just bricked my phone, with no possibility to boot. After hours of googling, installing, trying and crying, I managed in the end to flash back stock boot.img. But at that time, I didn’t know my build number (b359), and I flashed boot.img b351. So now I have a phone which boots into the system b359 with boot.img b351, but with lot of errors.
- developer options, security options, display and factory reset option doesn’t work and just crashes. Therefore I am not able to flash the correct boot.img b359 or anything else at all from pc, no way to enable usb debugging and oem unlocking. Adb devices → nothing. I am able to use fastboot (fastboot devices sees the phone), but when try to flash something, I get error “command not allowed”. Also I can’t enable unknown sources installation, which bothers me a lot. And I can’t make factory reset to restore the crashing settings. Also I can’t change display timeout, and original 30 secs is super annoying.
- I am not able to uninstall even apps installed by me, always just restarts system UI and app stays.
What I tried so far:
- flashing correct boot.img from pc, not working because of dev options crashing
- go into recovery, but stock one is overwritten with unfunctioning twrp, always just get stuck on “your phone was unlocked blah blah… your device is booting now”, but it never does, have to hard reboot
- go into huawei erecovery, which is working, but when I try to resolve problem from there, always ends up with errors and crashes
- connect to pc and use HiSuite, system recovery tool here always says “no problem detected”
- updating to b361 through system update settings, always crashes on 5% and sends phone into “your phone was unlocked blah blah… your device is booting now” error
- downloading the proper b359 as and update.app file, put it in dload internal storage → same error during update, put it in dload sdcard → same error, no matter which way I use to start the update
- boot into twrp or stock recovery.img through fastboot without actually flashing it, anyway error “command not allowed”
- do factory reset or update through dial codes (i.e. *#*#123456#*#* …), nothing worked
My pc is windows 10, all drivers up to date. Using powershell as an admin. Am an idiot for not making backup of the phone before I started...
So, now I have more or less functioning phone, but I can’t uninstall any apps at all, can’t install from unknown sources, can’t do nothing from pc, can’t make any update, and lot of important settings keep crashing.
I can use the phone like this, but if somebody could think about some solution for this ****ed up situation I got myself into, I would be grateful to him/her for the rest of my life.
Sorry for a long post.
Thank you in advance and have a nice day
I think using Hisuit will help. Enter Fastboot and connect ur phone to ur computer and use system recovery toll
Hi Guys,
My MI-A2 is stuck in bootloop ( When I turn on my phone it shows its Android One logo and then it shutdown itself ).
In my phone, I didn't turn on any USB Debugging or and OEM unlocking. and now it is possible as the phone is not starting.
I am able to access fastboot and recovery options
I tried to do factoryReset the device from the recovery option but it is just wiping the data.
here are the following things which I have tried with fastboot.
- I tried to unlock the fastboot with MiFlashUnlock but it stops at 99% and gives me the error of unable to verify the device,
- flashing the Stock ROM isn't working with MiFlashTool. giving random errors.
- tried changing the drive partition. it gives error to unlock the device first.
- tried tried to flash TWRP but it also gives me the error of unlocking the device first.
Almost every command of Fastboot is giving me some kind of error
But I am able to access the ADB Sideload from the recovery option.
- I tried to load the April OTA update from ADB Sidelode. The update is Successfully installed. But the device is still in bootloop.
Saving User data is not my priority. I just want the device to be working anyhow. As per my assumption, Fastboot is not an option for me unless it unlocked. I think something from the ADB sideload can be done.
Any help will be appreciated.
Is it a Guide?
Oh, now, its a Great News!
Please delete this post from this forum.
As I have already wrote to you, questions should go to "Questions and Answers" forum.
And as I have already wrote to you, Search works here, and if you've used it, you'd get answers (in mentioned above forum):
1. MiA2 having A/B slots architecture, - is supposed to recover to the other slot X when OTA corrupts ROM is slot Y, - after numerous boot attempts.
2. In case you have tampered phone with try-and-see operations without knowing what you were doing - the only way to recover phone is: TEST Point / EDL. Search these keywords in this forum for appropriate Guide.
try the "fastboot continue" command
dillu12 said:
Hi Guys,
My MI-A2 is stuck in bootloop ( When I turn on my phone it shows its Android One logo and then it shutdown itself ).
In my phone, I didn't turn on any USB Debugging or and OEM unlocking. and now it is possible as the phone is not starting.
I am able to access fastboot and recovery options
I tried to do factoryReset the device from the recovery option but it is just wiping the data.
here are the following things which I have tried with fastboot.
- I tried to unlock the fastboot with MiFlashUnlock but it stops at 99% and gives me the error of unable to verify the device,
- flashing the Stock ROM isn't working with MiFlashTool. giving random errors.
- tried changing the drive partition. it gives error to unlock the device first.
- tried tried to flash TWRP but it also gives me the error of unlocking the device first.
Almost every command of Fastboot is giving me some kind of error
But I am able to access the ADB Sideload from the recovery option.
- I tried to load the April OTA update from ADB Sidelode. The update is Successfully installed. But the device is still in bootloop.
Saving User data is not my priority. I just want the device to be working anyhow. As per my assumption, Fastboot is not an option for me unless it unlocked. I think something from the ADB sideload can be done.
Any help will be appreciated.
Click to expand...
Click to collapse
you need to flash the phone in edl mode
**just be careful there is a timeout ..when you put it into edl you need miflash and rom.loaded
*** download a stock fastboot stable pie for jasmine
**** unzip amd select revelant xml from within miflash
*****on phone manually boot to fastboot mode with buttons
****** run command "fastboot oem.edl"
*******device will boot to black screen ... immediately go to miflash and press the button to start flashing
___BE CAREFUL__ select clear all tick box at bottom of miflash screen
this should be enough to rescue your device regardless of what you've done or whether you unlocked bootloader or not