[Q] Advanced kernel for 270? - Xperia Z1 Q&A, Help & Troubleshooting

Yesterday I unlocked my bootloader, so the system made a whole reset, and I was stuck on an 14.5.A.0.270 stock with no root.
I downloaded a "advanced kernel" with root & recovery that killed my system, and I reflashed again the 14.5.A.0.270 stock (it's aliveeee!).
Now, I am wondering if there is an easy way of achieving root (unlocked bootloader) without having to download + reflash thousands of things... Maybe an advanced kernel for this rom would work? I tried to generate one with NUT's kernel builder but it does not seem to work...
Kingroot does not do the trick either...
Any assistance?

Hi,
I'm on the same system as you are (.270) and rooted my device with the Kingroot method. At first I've thought it had failed, however after exiting the app and giving two or three more tries it did the work, I suggest you doing the same .
Then with root access I was able to backup the TA partition, unlock bootloader, flash a custom kernel with TWRP and CWM Recoveries to root device again with SuperSU instead of KingUser (I've opened data usage and wasn't quite happy when I've seen that KingUser had used my data without my knowledge).
All the best,
~Lord
"And people think so supersonic and they make their bombs atomic" - Eagle Fly Free (Helloween)
Sent from my Nexus 10

I did as you said, test again, and it worked. With that and the scritp to replace Kinguser by Super su, I was ready to go.
Also, I really do not trust kinguser that much, it does quite a share of weird internet connections...
Thanks!

Related

[GUIDE] How to root without tripping knox - Kitkat and Lollipop, Locked bootloader

I take no responsibility for what happens to your device if you follow this guide. Rooting or modifying carries risks, however I have tested this procedure many times with 100% success on my SM-t805. It should work for any device, but I can't confirm, so feedback please if it works for your device.
1. Firstly you need to downgrade your device to a XXU1ANF8 or earlier firmware suitable for your particular model. This is available at http://samsung-updates.com/ or you can use this one XSG-T805XXU1ANF8-20140625 which is for the T805 model only.
https://www.androidfilehost.com/?fid=23501681358555496 T800 only
Download and then install the firmware on your device with ODIN.
If you are still on Kitkat then there is no need to wipe the data partition. However if you are running Lollipop after successful installation you will need to boot into recovery POWER + HOME + VOL UP then select WIPE DATA/RESET -
YOU WILL LOSE ALL YOUR USER DATA SO BACK UP ANYTHING YOU NEED TO THE SD CARD FIRST!
NOTE: IF THE INSTALL FAILS AT HIDDEN.IMG OR CACHE.IMG SIMPLY BOOT INTO RECOVERY AFTERWARDS AND WIPE CACHE THEN CARRY ON WITH THE REST OF THE PROCEDURE.
2. Once booted into Android, set up your wifi and google account and skip everything else (this wont be needed if you didn't wipe the data partition)
3. Next we need to install a Few apps, so go ahead and install these apps from Play Store:
System app remover(root)
Root Validator
Terminal Emulator For Android
KINGROOT 4.1
Kingroot updates and earlier versions if posted version doesn't work:
http://androidxda.com/download-kingroot-application
Kingroot 4.5 (latest version)
We also need to download the package from this LINK
4. Using the built in File Manager extract the zip package to your internal SD card. Once extracted, inside the extracted folder is another folder called MRW.
THIS FOLDER NEEDS TO BE MOVED TO THE ROOT OF YOUR INTERNAL SD CARD OR THIS WON'T WORK.
5. Next go to Settings set your display timeout to 10 mins.
Now Run KINGROOT then wait for it to do it's thing. If it reboots part way through the process then after rebooting unlock your device, but don't touch anything for a couple of mins. The app should restart and continue. If you are successful you can move to the next step. If not, exit the app and run it again, it may take several attempts before you eventually achieve root.
6. After success uninstall the KINGROOT app (NOT KINGUSER) (not required with v4.5) and the other blue app with Chinese writing.
Now reboot - DO NOT RUN THE KINGUSER APP
7. Let your device fully boot then run the Terminal Emulator and wait for the command prompt
NOTE: IF AT ANY POINT YOU SEE A POP UP BOX WITH CHINESE WRITING ASKING YOU TO UPDATE THE KINGUSER APP SELECT CANCEL.
Now type or copy and paste the following command into the Terminal window:
su
It will ask for root permission, so select ALLOW.
Without closing the terminal emulator window, hit the HOME button and run the SYSTEM APP REMOVER app. (The app is red and simply called UNINSTALL)
The app will ask for root permission, hit ALLOW.
Look for the KINGUSER app then select it and uninstall it. Exit from the app.
Re-open the terminal emulator window and type the following:
sh /sdcard/mrw/root.sh
This will run a script, you will see a bunch of warnings, just ignore them .At then end of the script the SUPERSU app will run.
8. Hit CONTINUE then NORMAL.
Next you may see another message that 'Samsung knox has been detected'. When you see this message select CANCEL.
Once completed you should see a message saying that installation has been successful. Hit OK.
If you see the message again 'Samsung knox has been detected' select CANCEL then exit the SUPERSU app.
9 . Now check with ROOT VALIDATOR that you have root and everything looks ok.
DO NOT REBOOT.
The root is only temporary, if you reboot you will lose root.
10. The next step is to install our ROM of choice with Flashfire.
For more info on FLASHFIRE see here: http://forum.xda-developers.com/general/paid-software/flashfire-t3075433
11. Run FLASHFIRE and grant it root.
12. Agree to the disclaimer and then hit the Red circle with a white +.
Next select 'Flash firmware package' and then navigate to the firmware you want to install (in this case the stock tar package) and select it.
Wait until it finishes scanning the archive.
Next you will see the list of partitions to be flashed, all that is really required is BOOT, RECOVERY and SYSTEM. You can flash the others if you wish.
When you're happy hit the TICK and then you will see a list of what will be flashed. If you tap any one of them you will be able to change the options. Tap the REBOOT option then select DOWNLOAD from the list. This is so we can boot into download mode after the flashing process to flash the Lollipop BOOTLOADER. If not upgrading to lollipop just select REBOOT
I'd advise to leave the rest as is and then hit FLASH
NOW WATCH CHAINFIRES MAGIC!
13. After reboot it should boot directly into DOWNLOAD mode or REBOOT if not updating to Lollipop.
If updating to Lollipop we need to flash a Lollipop BOOTLOADER. I have provided a link below for the T800 and T805. If you have a T700/705/T807/T707 or if the ones provided don't work then you will have to extract it from the Lollipop stock ROM and then TAR it up.
T800XXU1BOCC_BOOTLOADER.tar
T805XXU1BOCC_BOOTLOADER.tar
Latest T800 boot loader thanks DUHasian skillz.
T800XXU1BOE3 bootloader
Flash the BOOTLOADER with ODIN.
If successful then after reboot you should have a rooted version of Lollipop or whatever rom you decided to install and an untripped Knox counter(hopefully)
Good luck and please give feed back.
If you wish you can give feedback to Chainfire at the link posted at the beginning of this post.
NOTE: If you wish to change roms or update and wish to keep root you will have to use the same procedure with Flashfire.
Also note that if you flash a custom KERNEL or BOOTLOADER then it may trip KNOX. Custom ROMs with stock KERNEL and BOOTLOADER should be OK(but don't hold me to that)
CREDITS TO CHAINFIRE FOR FLASHFIRE AND SUPERSU, KINGTEAM FOR ROOT AND WOLFDROID FOR THE KINGROOT REMOVAL SCRIPT.
My god I've been waiting for a thread like this one for a long time.
I don't have time to try it today but I'll give you feedback in a day or two.
Feedback here http://forum.xda-developers.com/showpost.php?p=61296003&postcount=12
Moderators, this thread should be sticked
Just so that I understand the limits of this method I need to ask. Is this method specific to achieve rooted (SuperSU) Lollipop 5.0.2 without tripping Knox or can further changes be made? For example:
1) Remove system apps (removing bloat).
2) Adding system apps such as Viper4Android, busybox, which must be installed in /system/priv-app
3) The Lollipop/Samsung compatible XPosed framework and modules
4) Installing a Tab S model compatible recovery (e.g. TWRP) as I would really like nandroid backups.
I only ask as in the Tab S Kingroot thread there was a post which mentioning that despite Kingroot having successfully achieved root without tripping Knox if you messed with the /system partition files there was the possibility of tripping Knox.
The comment in step 12 "... then navigate to the firmware you want to install ..." suggests that you could install one of the model compatible custom ROMs (e.g. CM). Is that a correct assumption or right now are you restricted to Lollipop stock? Some of those ROMs are from Lollipop 5.1.1 AOSP source (e.g. CM 12.1) which may be going too far with this method and still not trip Knox.
One last question, if I did implemented this could I go back to a pure unrooted stock kitkat/lollipop using Odin or Flashfire without tripping Knox? Odin would be fine.
I greatly appreciate the effort and quality of your post. I had hoped that a "Knox off" SuperSU lollipop root would be found for my month old Tab S 10.5 as I'm used to the low risk flashing on the Nexus devices and have had a mean itch to root without obvious risk to my warranty.
Thanks again
This method can be used to root any Rom.
Once you have root you can practically do what you please.
As for tripping Knox if you mess with the system partition, that's the whole point of root it already messes with the system partition. It shouldn't trip Knox, but never say never.
Just ensure once you have root you remove everything Knox related.
I can't confirm if a custom Rom will trip Knox, but as already stated as long as the bootloader and kernel are stock I believe it won't trip Knox.
Custom recovery may trip Knox.
You can go back to stock any time you wish.
ashyx, as I'm a Linux user its taken me a while to set up a Windows machine but I finally have KIES working and Odin recognizing my Tab S. Now I'm doing my "read your how-to OP twice and root once" prework, but I'm left with a bit of confusion. In my case I am already on Lollipop 5.0.2 so have downloaded stock 4.4.2. When I read steps 12 and 13 I became a bit confused.
What I want is to be rooted (SuperSu) on stock lollipop (T800XXU1BOE2) so I'm assuming that in step 12 I will be using Flashfire to flash boot, recovery and system from the Samsung stock 5.0.2 lollipop firmware file. My confusion comes in step 13 as it seems redundant to flash the lollipop bootloader I just flashed in step 12. Is step 13's flashing the bootloader redundant if you flashed it in step 12?
I apologize if this is a noob question but I just want to get things right and avoid a bricked device especially when the bootloader is involved. At this point I'm only looking to remove bloat and add specific apps that require root so rooted stock is good enough but I'll be in position to try a custom ROM if I feel the need.
Thanks again
3DSammy said:
ashyx, as I'm a Linux user its taken me a while to set up a Windows machine but I finally have KIES working and Odin recognizing my Tab S. Now I'm doing my "read your how-to OP twice and root once" prework, but I'm left with a bit of confusion. In my case I am already on Lollipop 5.0.2 so have downloaded stock 4.4.2. When I read steps 12 and 13 I became a bit confused.
What I want is to be rooted (SuperSu) on stock lollipop (T800XXU1BOE2) so I'm assuming that in step 12 I will be using Flashfire to flash boot, recovery and system from the Samsung stock 5.0.2 lollipop firmware file. My confusion comes in step 13 as it seems redundant to flash the lollipop bootloader I just flashed in step 12. Is step 13's flashing the bootloader redundant if you flashed it in step 12?
I apologize if this is a noob question but I just want to get things right and avoid a bricked device especially when the bootloader is involved. At this point I'm only looking to remove bloat and add specific apps that require root so rooted stock is good enough but I'll be in position to try a custom ROM if I feel the need.
Thanks again
Click to expand...
Click to collapse
Good question. DO NOT flash bootloader in step 12 (newer bootloader) as Knox is likely to be tripped when you flash the 4.4.2 bootloader via odin in step 13. That was the instruction in Mobile odin (which could not flash bootloader). Flashing bootloader in step 12 is redundant.
shayind4
shayind4 said:
Good question. DO NOT flash bootloader in step 12 (newer bootloader) as Knox is likely to be tripped when you flash the 4.4.2 bootloader via odin in step 13. That was the instruction in Mobile odin (which could not flash bootloader). Flashing bootloader in step 12 is redundant.
shayind4
Click to expand...
Click to collapse
Firstly, nowhere does it state to flash the kitkat bootloader on a lollipop Rom in step 12 or 13.
By step 13 you should be running a lollipop Rom.
Secondly Knox should not trip when flashing a stock bootloader. The bootloader can be flashed independently in Odin.
Lastly Flashfire does NOT flash bootloaders.
If you don't flash the bootloader your Rom won't boot.
I suggest you digest the guide again.
3DSammy said:
In my case I am already on Lollipop 5.0.2 so have downloaded stock 4.4.2. When I read steps 12 and 13 I became a bit confused.
What I want is to be rooted (SuperSu) on stock lollipop (T800XXU1BOE2) so I'm assuming that in step 12 I will be using Flashfire to flash boot, recovery and system from the Samsung stock 5.0.2 lollipop firmware file. My confusion comes in step 13 as it seems redundant to flash the lollipop bootloader I just flashed in step 12. Is step 13's flashing the bootloader redundant if you flashed it in step 12?
Click to expand...
Click to collapse
It doesn't state to flash the boot loader in step 12? :what:
Your boot loader will be replaced when you downgrade to kitkat via Odin.
You need to reflash the lollipop boot loader after using Flashfire to install your Lollipop Rom or it won't boot.
Do i need to use a prerooted rom with flashfire, to maintain root, or can i just flash any original samsung room even if its not prerooted?
Paddiii said:
Do i need to use a prerooted rom with flashfire, to maintain root, or can i just flash any original samsung room even if its not prerooted?
Click to expand...
Click to collapse
No, this is the whole point of the post. Flashfire will root for you.
ashyx said:
It doesn't state to flash the boot loader in step 12? :what: ...
Click to expand...
Click to collapse
My bad, I saw the word "Boot" in step 12 and incorrectly assumed that was referring to a bootloader image.
Thanks for correcting me and your patience.
Sorry for being so long to give the feedback I promised.
I have one thing to say: thank you ! Your method works perfectly ! I am now running stock samsung lollipop on my T800 with knox untripped (0x0).
Little thing: your 4.4 file for the T800 isn't working (something wrong when flashing for the Hidden img). I took the same file but in XEF (I'm in France).
I just have a few questions now that could help other users:
-You say you are not sure about flashing another rom as long as it is with stock kernel and bootloader. But on a scale from 0 to 10 how sure are you about it working ? (I know you don't have any responsability in what happens, I just want a piece of advice).
- If for any reason I want to go back to stock, I just need to reflash the firmware with Odin ?
-Can I uninstall apps like the knox related ones without any risk about tripping knox ? (I think it is okay) (Edit: Ok I did it and knox not tripped. I used this tool http://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294 that is very convenient for that purpose )
Again thank you for this tutorial !
bibihub said:
Sorry for being so long to give the feedback I promised.
I have one thing to say: thank you ! Your method works perfectly ! I am now running stock samsung lollipop on my T800 with knox untripped (0x0).
Little thing: your 4.4 file for the T800 isn't working (something wrong when flashing for the Hidden img). I took the same file but in XEF (I'm in France).
I just have a few questions now that could help other users:
-You say you are not sure about flashing another rom as long as it is with stock kernel and bootloader. But on a scale from 0 to 10 how sure are you about it working ? (I know you don't have any responsability in what happens, I just want a piece of advice).
- If for any reason I want to go back to stock, I just need to reflash the firmware with Odin ?
-Can I uninstall apps like the knox related ones without any risk about tripping knox ? (I think it is okay) (Edit: Ok I did it and knox not tripped. I used this tool http://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294 that is very convenient for that purpose )
Again thank you for this tutorial !
Click to expand...
Click to collapse
The hidden.img failure is because its carrier/region related.For some it will flash ok, for others it will fail. It isn't actually required at all. Even if it fails to flash the rest of the Rom will.
All that needs to be done after that failure is to wipe cache in recovery.
As regards flashing custom roms. Remember your Rom is already custom as you have modified it.
I would say a good chance custom stock roms won't trip Knox as long as it's build properties reflect its a stock Rom.
However something like Cyanogen probably would trip Knox as its not based on stock.
I won't say this is for sure, but I think it's the general consensus.
Over one thousand views and literally only one person has bothered posting feed back.
ashyx said:
Over one thousand views and literally only one person has bothered posting feed back.
Click to expand...
Click to collapse
OK now two. I successfully applied your instructions yesterday. I really appreciate your guide.
What I did, differently is flashed with Odin using a Virtualbox Windows guest VM from my Ubuntu 14.04 host PC. It took a few days of false starts to get that working. Here is a "[How-To] Linux, Virtualbox and ODIN for your Samsung device", that I just posted to help others who do not have access to Windows machines.
Of the whole procedure the scariest moment was after flashing 4.4.2 stock with Odin over my devices 5.0.2 install. The reboot was too fast for me to get into recovery to wipe user data. I could not power off the SM-T800 and holding POWER + VOL DOWN just rebooted where it would hang displaying "SAMSUNG".
Booting into recovery ( POWER + VOL UP + HOME) had no effect what so ever. Finally I found that if I was fast enough I could reboot (POWER + VOL DOWN) and as soon as the screen went blank hold down the "POWER + VOL UP + HOME" buttons, then the tablet booted into recovery where wiping user data worked as described in your guide.
After completing your guide I am on stock Android 5.0.2 with Knox 0x0000.
My root apps so far:
Busybox
Titanium backup
GMD Gestures.
ES File Explorer with RW access to all partitions
System Uninstall Pro
Universal init.d
See Update below: "Unfortunately so far Viper4Android is not working as I cannot get SELinux permissive enabled either by the SELinux app or an init.d shell script using the "setenforce 0" command. From what I've read that is due to the Samsung stock bootloader."
V4A now works, see: "[HOW-TO] Installing Viper4Android (V4A) Audio on a Lollipop Tab S"
I took the high road and only froze the following KNOX related apps using titanium backup:
com.sec.enterprise.knox.attestation
KLMS Agent
KNOX
KNOX
KNOX II
KNOX SetUpWizardClient
So far I debloated 117Mgs of other apps using System Uninstall Pro. I bought the pro version of Flashfire just to show respect for Chainfire's development efforts. I have not tried to see if Flashfire's backups can be successfully restored yet.
Thanks again for your guide.:good:
Thanks for the feedback, it's constructive and encouraging for others to know It's successful.
For future reference you can disable auto reboot in Odin then manually reboot with POWER + VOL DOWN + HOME then as soon as it restarts switch to VOL UP while continuing to hold the other buttons.
The above procedure can be used at any point and will restart the device and get you into recovery every time.
just registered to suport OP, it works
I thought I did not need to run the su script as I could use kinguser w/o problems. But the flashfire is not compatible with other kinguser. Hope chainfire could remove this restriction. Maybe there is another way to flash rom or other mobile odin alternatives.
The OP could add a link about how to use odin for newbies like me. The odin 3.10 have different wording than previous version.
One more thing to mention is that the kingroot will work if you downgrade. I was in kitkat XXU1ANFB which is only one version up. The kingroot failed 20 times. XXU1ANF8 only takes 3 times to work.
After debloating in lolipop, the system is not smoother than before. The display has less contrast and dimer than kitkat. I did not wipe data/cache so my setting stays the same.
I rooted only for better battery performance as charging will take 10+ hours and could not hold charge at use with power cord plugged. It seems that the performance is not improved for this device after debloating.
vancities said:
I thought I did not need to run the su script as I could use kinguser w/o problems. But the fireflash is not compatible with other root authorization app. Hope chainfire could remove this restriction. Maybe there is another way to flash rom or other mobile odin alternatives.
The OP could add a link about how to use odin for newbies like me. The odin 3.10 have different wording than previous version.
One more thing to mention is that the kingroot will work if you downgrade. I was in kitkat XXU1ANFB which is only one version up. The kingroot failed 20 times. XXU1ANF8 only takes 3 times to work.
After debloating in lolipop, the system is not smoother than before. The display has less contrast and dimer than kitkat. I did not wipe data/cache so my setting stays the same.
I rooted only for better battery performance as charging will take 10+ hours and could not hold charge at use with power cord plugged. It seems that the performance is not improved for this device after debloating.
Click to expand...
Click to collapse
I'm not quite sure what you're saying, but I think youre saying you had success?
Regarding Odin, it is not the intention of this post to spoon feed every single step, some knowledge is expected prior to following this guide. Anything relating to the actual process in this guide is explained in detail. Any other information you would ever require is already posted on XDA.
ashyx said:
I'm not quite sure what you're saying, but I think youre saying you had success?
Regarding Odin, it is not the intention of this post to spoon feed every single step, some knowledge is expected prior to following this guide. Anything relating to the actual process in this guide is explained in detail. Any other information you would ever require is already posted on XDA.
Click to expand...
Click to collapse
I had success. What I mean is the step 6 7 8 9 are not necessary if flashfire could work with kinguser.
Also kingroot only works on XXU1ANF8 and maybe lower. I mentioned this because in other thread about kingroot, someone got success but most did not.
So my feedback . everything was great , was a little confused about Odin at first but like you said everything can be found on xda. Need to be on the most recent Odin which I believe is 3.10. Kingroot took forever to root but I believe it has something to do with connectivity to the servers. So my tab s is rooted no Knox counter. I'm hoping the custom tw rom doesn't revert all the hard work ? thanks again op.

[Q] First Time Rooter, Gs6 SM-G920T, need help intresting problem cant find fix.

#1-"com.tmobile.pr.adapt (10001) has been granted superuser permissions for an interactive shell" pops up on my screen every 30 seconds on the bottom of my screen in a grey box.
#2- i also noticed that i can accept and recieve calls but i can not hear, nor can the other person hear me. if i use hangouts video call, skype, etc it works fine.
#3-i also tried to get rom manager to make a recovery and it says it needs to get CWD recovery to install a new software, the first thing we need to do is install a up to date version, we will begin that process now... etc.. then it says to get started you must first sset up a custom recovery, it gives two options a samsung galaxy s3 on metro pcs or a samsung previal 2 on boost mobile, or device not listed, when i click that it says "SM-G920T does not have an officially supported CWDR yet. Have you installed a CWD based recovery manually?" so im not sure what to do from there, or if i even need that. i have been a iphone user since day one went to android after reading up a lot on it, although rooting is quite different than jailbreaking it seems, i am incredibly excited to get started if i can get past these little problems and get started and figure everything out. ANY advice, or anwsers to these problems would be Greatly appreciated! thanks!
Also i went to dev options in settings and noticed the "OEM unlocking- allow the bootloader to be unlocker" was turned off, i dont know if this is necessary to root if i did something wrong by not turning it on or what, or if it may fix any problems above if i turn it on now. thanks!
I have a samsung Galaxy S6 (SM_G920T) . i Rooted and did not trip Knox, Although i did just remember that my fingerprint sensor is not working either.
Thank you guys so much this si a incredible forum i have spent hours and hours reading and researching before making this post i appreciate it so much!
#1 Freeze that ****. Use some root tool to freeze that T-mobile apk, seems u gave it root permissions at some point. I believe there are a lot of apps that you will want to do the same.
#2 ? No idea. Stock rom/kernel?
#3 What is this I don't even. Don't do that. Go to TWRP's official web, get your zeroflte (SM-GT920T) twrp and flash it via ODIN, or else get the recovery.img and use flashify. All that assuming you want a custom recovery.
You will need to unlock the bootloader if you are on 5.1.1. I believe locked will prevent changes or wiping anything on the OS partitions, even recovery (can someone confirm?)
I believe jailbraking and rooting should be pretty much similar, if not the same, as both target to grant the user root access to do whatever he pleases on the OS.
Welcome to android btw.
How did you root? Sounds like you used the modified sboot which causes no sounds in calls and nonfunctional fingerprint scanner. If so, flash back to stock and use a different rooting method. The rest, pretty much what the above poster stated
Root
I rooted using the version that I found the only one that works it seemed like, went to Odin put my phone In download mode and then put the boot loader download in BL and the. Put a something unikernel.sbin I believe, whatever the guide said also then it was done. I thought you couldn't use the twrp or custom recovery etc on tmobile one yet but I just read a thing about xtrestolite odex pure v2 which says it's for 5.1.1 and my model of phone but in the guide it says to root using CF auto root and a link there to it but the link doesn't have my phone on the list that the guide that clearly is my phone says to use I don't know if I'm missing something but I want to use it I understand most of it but I don't know if I need to unropt first and re root then use Odin and flash twrp that's supported on my phone then use that to recover the rom. Etc. The kernel that says is used in the guide is the same one I downloaded so do I need to remove it all then let it do that or?
Sorry if this didn't make sense I'm halfway there between confused and understood I have spent the last 10 hours reading and trying to figure this out though lol. Thanks guys!
Also
Sorry for adding more but also how do I flash back to stock? Search for the download to the stock image of my phone? Also I could only find one way of rooting everything else said it wasn't working yet or am I missing a big portion of something here?
Just flash the 5.1.1 firmware to return to stock. To root, flash unikernel with Odin. The other method you used was to not trip knox, but as you experienced has side effects. I had to Odin back to 5.1.1 myself. Can't have those issues
thanks!
so how do i flash back to 5.1.1? find the ling to completely stock 5.1.1 and flash through odin in the same spot and same way i flashed the kernel to root? also.. i rooted with " s6_UniKernel_v2-0003-ODIN.tar" is that not the one you were talking about?
CjetOKC said:
so how do i flash back to 5.1.1? find the ling to completely stock 5.1.1 and flash through odin in the same spot and same way i flashed the kernel to root? also.. i rooted with " s6_UniKernel_v2-0003-ODIN.tar" is that not the one you were talking about?
Click to expand...
Click to collapse
Yes, flashing to 5.1.1 works exactly like that. You need to get the version for your model (very important on this one) and then simply place that file in the AP field of ODIN while the device is in recovery mode. It is normal for ODIN to freeze for 2 minutes while verifying. Make sure to use a MD5 checker tool on the firmware before flashing.
Rooting has historically required more technical savvy and balls than jailbreaking, but PingPong made rooting the S6 brain-dead simple. CF-Auto root is still pretty painless, but you must make sure you have the right zip for your device.
Anyhoo, the quickest & easiest way to restore phone calls & fingerprint scan is to use Odin to get back to bone stock.
Next, use PingPong to root. After rooting, "com.tmobile.pr.adapt" will ask for root access. That is T-Mobile's "phone home" app and sends info about your device (probably including root status). Deny it root access and make sure you check "Remember my choice", and it won't bother you again. You will not lose any functionality by denying it root, so terminate that crap.
Don't bother with rom manager. CWM is archaic. If you want a custom recovery, use TWRP. You can install TWRP either using Odin or TWRP Manager app (it's free).
Good luck and have fun with your S6
CjetOKC said:
Sorry for adding more but also how do I flash back to stock? Search for the download to the stock image of my phone? Also I could only find one way of rooting everything else said it wasn't working yet or am I missing a big portion of something here?
Click to expand...
Click to collapse
Are you still rooted? If so, and if you are experiencing the call audio issue, go flash AOU's kernel. He has made a kernel for the tmo s6. that should eliminate your call audio issue. The finger print scanner is the only issue with flashing his kernel. Also, I rooted with the modded sboot, his TWRP and kernel, and I didn't trip knox
http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002

Persistent root without installing TWRP

I used this method after I unlocked with sunshine to remove king-root and replace it with SuperSU. It worked great for me. Kingroot is gone and i have a permanent root and SuperSU installed. I was wondering if there is someone else who has unlocked their boot-loader and not yet installed TWRP who can give it a shot to see if my expereince was a fluke or the norm. It would be a nice addition for people who want root but don't want TWRP installed for one reason or another.
I used the second link in his post.
Replace_Kinguser_with_SuperSU-v2.4.zip
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
Thank you
HT123 said:
I used this method after I unlocked with sunshine to remove king-root and replace it with SuperSU. It worked great for me. Kingroot is gone and i have a permanent root and SuperSU installed. I was wondering if there is someone else who has unlocked their boot-loader and not yet installed TWRP who can give it a shot to see if my expereince was a fluke or the norm. It would be a nice addition for people who want root but don't want TWRP installed for one reason or another.
I used the second link in his post.
Replace_Kinguser_with_SuperSU-v2.4.zip
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
Thank you
Click to expand...
Click to collapse
I previously used the above method you posted to permanent root an LG Transpyre on 5.1.1 that did not have the bootloader unlocked. Glad to see someone else knows about it. :good:
Maybe it will work on a locked bootloader Turbo for those who don't want to unlock their phones but just want root.
classic757 said:
I previously used the above method you posted to permanent root an LG Transpyre on 5.1.1 that did not have the bootloader unlocked. Glad to see someone else knows about it. :good:
Maybe it will work on a locked bootloader Turbo for those who don't want to unlock their phones but just want root.
Click to expand...
Click to collapse
Can not unlock booloader root? I do not have a visa. $ 25 is a huge amount to me
Thành67890 said:
Can not unlock booloader root? I do not have a visa. $ 25 is a huge amount to me
Click to expand...
Click to collapse
I don't think that is the case.
What I said was you don't need to install a custom recovery.
Give it a shot report back though. Worst that can happen is it does not work.
HT123 said:
I don't think that is the case.
What I said was you don't need to install a custom recovery.
Give it a shot report back though. Worst that can happen is it does not work.
Click to expand...
Click to collapse
Agreed. I was just pointing out that I was able to use kingroot and wolfdroid's method to permanent root a phone (albeit an lg phone) that had a locked bootloader. Other people also had success doing that as well on other brands of phones. Will it work on a Turbo with a locked bootloader? IDK. However I would not be surprised if it does. I had a Turbo with a locked bootloader but sold mine else I would try it myself.
classic757 said:
Agreed. I was just pointing out that I was able to use kingroot and wolfdroid's method to permanent root a phone (albeit an lg phone) that had a locked bootloader. Other people also had success doing that as well on other brands of phones. Will it work on a Turbo with a locked bootloader? IDK. However I would not be surprised if it does. I had a Turbo with a locked bootloader but sold mine else I would try it myself.
Click to expand...
Click to collapse
I agree, i apologize if it it came off otherwise. I think the question is if the sunshine process removes the protection and allow writing to the system partition. I unlocked prior to making my root permanent so i cant test again but am very interested to see if it works with a locked boot loader
HT123 said:
I agree, i apologize if it it came off otherwise. I think the question is if the sunshine process removes the protection and allow writing to the system partition. I unlocked prior to making my root permanent so i cant test again but am very interested to see if it works with a locked boot loader
Click to expand...
Click to collapse
My thinking it that it probably will work because temp root can be obtained on a locked bootloader Turbo with kingroot. It's just that kingroot is unstable and often times does not survive reboot. However, wolfdroid's method is similar to using SuperSu Me(or SuperSume). It removes kingroot and replaces it with SuperSu, which of course is more stable and survives reboot.
classic757 said:
My thinking it that it probably will work because temp root can be obtained on a locked bootloader Turbo with kingroot. It's just that kingroot is unstable and often times does not survive reboot. However, wolfdroid's method is similar to using SuperSu Me(or SuperSume). It removes kingroot and replaces it with SuperSu, which of course is more stable and survives reboot.
Click to expand...
Click to collapse
If security is disabled and the system can write to the system partition it will work, if not, then I assume Sunshine disables it in the process of unlocking the boot-loader. Hopefully someone with a stock Turbo who was going to unlock anyway can verify.
Not sure why you wouldn't want a custom recovery. With custom recovery you can make backups of your entire phone image in case you screw something up. Many times in the past I've flashed something that didn't work as I expected. And with ROOT, if you flash something you can screw up something system-related. Very easy to boot back into TWRP recovery and restore the previous day's backup I had made. Like a time machine to erase your mistake.
And it's FREE. Doesn't cost anything.
Yes, with Titanium Backup (a powerful app) you can restore previous versions of an another app. (I choose to save 3 days worth of apps in Titanium Backup.) But with a TWRP custom recovery backup (also called a "nandroid"), you can save and restore the ENTIRE phone, including all system apps, all settings, everything. Very powerful, useful tool.
I wouldn't have a rooted phone without custom recovery. That's one of the main reasons I always buy phones where I can unlock the bootloader -- to install custom recovery (like TWRP or CW) and root.
If you screw something up and come asking for help, the first thing someone is going to ask is, "Did you make a backup?" And they are talking about a custom recovery backup.
ChazzMatt said:
Not sure why you wouldn't want a custom recovery. With custom recovery you can make backups of your entire phone image in case you screw something up. Many times in the past I've flashed something that didn't work as I expected. And with ROOT, if you flash something you can screw up something system-related. Very easy to boot back into TWRP recovery and restore the previous day's backup I had made. Like a time machine to erase your mistake.
And it's FREE. Doesn't cost anything.
Yes, with Titanium Backup (a powerful app) you can restore previous versions of an another app. (I choose to save 3 days worth of apps in Titanium Backup.) But with a TWRP custom recovery backup (also called a "nandroid"), you can save and restore the ENTIRE phone, including all system apps, all settings, everything. Very powerful, useful tool.
I wouldn't have a rooted phone without custom recovery. That's one of the main reasons I always buy phones where I can unlock the bootloader -- to install custom recovery (like TWRP or CW) and root.
If you screw something up and come asking for help, the first thing someone is going to ask is, "Did you make a backup?" And they are talking about a custom recovery backup.
Click to expand...
Click to collapse
As far as why... some people like chocolate... some people like vanilla. The question is not the merits of a custom recovery, it is if one is required to have persistent root on the phone.
I personally don't care about a custom recovery. I prefer the stock rom at this point because without fail most custom roms have some minor bug that inevitably annoys the sh*t out of me. I want root because i want an ad blocker. I want an ad blocker because I use my phone as a proxy for web traffic on a computer with network monitoring software and i would prefer my internet traffic not be visible to my employer. There is zero reason for a custom recovery to do what i want to do.

pls help. i think i messed up!

Ok so i watch the youtube video on this and read though some of the Kingroot and Sunshine threads.
now i saw on Sunshine site (verizon3.2 for droid turbos) that Kingroot wasnt needed anymore to gain temproot. And this is only my sec droid that ive tried to root so forgive me for any mess ups. Aways i download sunshine. It ran its test on my phone, it said that everything was good it will work buy or code bla. So i buy it 25bones. It does what it does and works rebooted my phone says it unlocked(score) now doing a root test with Easy Root Checker say the a dont have root and that superuser: Unidentified Superuser. should i of done King Root before? What should i do now?
Being rooted is different from being unlocked.
Unlocking the bootloader allows changes to to be made to your device's operating system files that the manufacturer/carrier has blocked access to.
Root, meanwhile, is traditionally the username in Linux who has the highest level permission settings possible (ie. Superuser permissions).
Sunshine unlocks the bootloader; and Kingroot can also be used to gain permanent superuser level access your Droid Turbo. When you unlocked your phone, it only /temporarily/ rooted as part of the unlock process. Now what you need to do is go to kingroot.net and permanently root your phone.
Many people seem to like SuperSU better than Kingroot though. So after you get Kingroot to root your phone, go to the Play Store and get Super-Sume Pro. It automatically removes Kingroot and installs SuperSU. Oddly enough, though Super-Sume Pro does cost money to purchase from the Play Store initially, the Play Store's automatic refund policy kicks in if you uninstall it within 2 hours of purchase, and there's no reason to keep it after you've successfully run it once.
Sent from my XT1254 using Tapatalk
If your bootloader is unlocked, then install TWRP custom recovery and from there flash SuperSu. You will have a FREE solution and have both custom recovery and full root -- the best of both worlds.
Custom recovery lets you make image backups so you can restore your phone to an earlier point in time when everything was OK, if you screw up. Also lets you flash stuff like custom kernels and custom ROMs. But just the image backups is enough to have it.
When you install TWRP, if you try to exit without root it will ask if you want to flash SuperSu. It's included in TWRP. Or you can download SuperSu and flash it manually in TWRP. Your choice.
What chazzmatt said. Here are some basic links and instructions.
http://forum.xda-developers.com/showthread.php?p=64033988

How to flash mod.zip without TWRP and root?

Hello all,
I want to flash a mod.zip (in my case it is the v4a rootless driver) on my unrooted redfin with A12.
As you might know there is no TWRP right now for our Pixel 5 with A12, therefore I qm looking for other ways to flash this particular zip file.
I am trying to remove root from my device as it makes life more complicated which is not really necessary.
So is there any way to flash a mod.zip on an unlocked device without using a custom recovery?
Thanks in advance!
No. Only a custom recovery can be used to flash something, and a custom recovery requires unlocked bootloader.
It IS possible to install a Magisk module by temporarily booting a Magisk patched boot image, but again that requires an unlocked bootloader, and I don't think Magisk can install modules without root. Even if it could, root would still be required in order to load said modules.
If this driver doesn't require root, I would imagine it can be installed from within V4A.
The problem here is that Android checks for signatures which are only known by the makers of the phone. So that only developers of the phone can push updates. Custom recovery just bypasses the check which helps you flash anything
Android 11 + root is working wonderfully.
We have permanent TWRP.
I don't believe nandroid backups work but haven't tried really yet.
If you are only routing for V4A, I guess it comes down to is it worth it for you, as I haven't known a way to use V4A on A12 while un-rooted.
Best of luck.
andybones said:
I don't believe nandroid backups work but haven't tried really yet.
Click to expand...
Click to collapse
I can confirm that as of a few days ago, TWRP didn't create a working Nandroid backup for me even though it finished the process and prompted "success"!
Before I started to mess around with my phone, I created a Nandroid copy thinking if anything happens, I can always restore using this backup. I was so disappointed after I soft bricked my phone but my Nandroid copy was useless to save me. As a result, I flashed with a Google ROM for the 1st time in my Android ownership without root.
In the past 6 months, I've had to combat Google 3 times to pass SafetyNet. Though I could get it to work on the 1st 2 times, it was a lot of time investment since I had to research for a solution. The 3rd time I bricked my phone and had to factory reset the phone and start over.
If Google keeps beefing up SafetyNet every few months, this cat and mouse game is simply too time-consuming to make up for the convenience of a rooted phone.
Passing safety net is easy. Just install magisk canary it's just that easy. But the only thing is that magisk hide is not there in canary

Categories

Resources