{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[COLOR="gray"]
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
[/COLOR]
General Information
- This ROM is for all variants of the 3rd generation Kindle HDX tablets.
- This is primarily for users of Safestrap 4.0.1, however
- This will also work on devices with TWRP however you must also unlock your bootloader.
What's working
- Everything including LTE and SMS
- Phone calls are not working but not sure if they can or not.
Bug Reports
- Please report bugs here.
Fresh Installation
- From Safestrap, go into Wipe Menu and Swipe to perform a factory reset.
- Flash the ROM File
- Flash any ARM, 4.4 version of Open Gapps you want
- Flash SuperSU 2.4.6
- Reboot
- Enjoy!
Upgrading to a new version
- Flash the ROM
- Flash Gapps
- Flash SuperSU 2.4.6
- Reboot
- Enjoy!
Downloads
- LineageOS Builds for Thor
- LineageOS Builds for Apollo
- Open Gapps
- SuperSU 2.4.6
Source Code
- Kernel Source: Kindle HDX stock kernel, build number 1314.4.5.5.3
XDA:DevDB Information
Lineage-11.0 for Safestrap v4, ROM for the Amazon Kindle Fire HDX 7" & 8.9"
Contributors
ggow
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock base of .4.5.5.3 and Safestrap v4
Based On: LineageOS
Version Information
Status: Stable
Created 2015-06-28
Last Updated 2019-10-02
Release Notes / Change
21 December 2018
- Included / Ported relevant Security Patches up to December 2018
30 November 2018
- Included / Ported relevant Security Patches up to November 2018
- Updated to FireOS 4.5.5.3 binary blobs
- Retire AOSP Browser due to security holes
- Please install an up to date browser of your choice
- Upgrade external/openssl: 1.0.1e -> 1.0.1j
- ANT+: Update to v4.0.0
- giflib: Update to v5.1.4
- bsdiff: Check for corrupt patch
- jhead: Update to cm-13.0 branch
- libexif: Update to android-5.1.1_r38 branch
- e2fsprogs: Update 1.41.14 -> 1.42.9
- NOTE: for some reason we need to flash gapps and supersu again on upgrade
17 October 2016
- Ported Google's October 2016 Security Bulletin
Older Version History:
18 September 2016
- Ported Google's September 2016 Security Bulletin
06 August 2016
- Ported Google's August 2016 Security Bulletin
27 July 2016
- Ported Google's July 2016 Security Bulletin
21 June 2016
- June 2016 Patch Level
- Update CM Code
12 May 2016
- May 2016 Patch Level
- Update CM Code
08 Apr 2016
- April 2016 Patch Level
- Update CM Code
06 Feb 2016
- Fixed Audio Issue from last Release
- Re-tested on Thor and Apollo
2016/02/04
Updated CM Code
01 February 2016 AOSP Security Patch Level
2016/01/18
Fixed battery stats, the readings should be as accurate as using FireOS
Updated CM Code
2016/01/04
Updated CM Code
2015/12/12
Updated CM Code
Fixed Orientation of Cameras
2015/11/24
Updated CM Code
Fixed bug in the last build with motion sensor been reversed in x-axis
2015/11/22
Updated CM Code
Also includes the lastest Stagefright Patches
2015/10/27
Updated CM Code
2015/10/07
Updated CM Code
Back port signature faking to enable use of microG framework
2015/09/28
Updated CM-11 code
Fixes to stock camera app
Open Gapps is recommended going forward (linked in the OP)
2015/07/26
Fix RIL Radio Detection Bug
Fixed MTP and ADB connectivity
Added back Stock Calendar app
Added back Stock Browser app
Added back Stock Camera app
2015/07/25
Latest CM Code
Fix RIL Radio Detection
Battery Stats (radio detection)
Hide 3G/LTE icon and settings automatically
2015/07/09
Latest CM code
Fixed Battery Stats
Removed Stock Calendar app
Removed Stock Browser app
Removed Stock Camera app
Removed unnecessary media kernel modules just taking up space.
2015/06/28 - Inital Release
Reserved
LTE working
Hi,
i just installed this rom on my Thor LTE Unlocked BL with TWRP and (nearly) everything is fine:
LTE works (dialog with SIM-Pin takes about 2 minutes to pop up after boot, but that is ok).
just two things:
- registering with google account is not possible due to broken hosts-file. I commented the line with "127.57.144.26 android.clients.google.com" and everything works fine with google.
- Rotation is upside down. Apps, that rotate to landscape (plex, for example) rotate so that the camera is at the bottom side, not on the upper side. So sound is reversed, and speaker are looking down instead of up.
btw - this rom installs fine, not complaining about failed symlinks like the "HDX_Nexus_ROM_Thor-v4.0.3-B02.zip" does ...
good job!
ps: i was a bit irritated regarding the missing root app, but then i read your post#1
sn123py said:
Hi,
i just installed this rom on my Thor LTE Unlocked BL with TWRP and (nearly) everything is fine:
LTE works (dialog with SIM-Pin takes about 2 minutes to pop up after boot, but that is ok).
just two things:
- registering with google account is not possible due to broken hosts-file. I commented the line with "127.57.144.26 android.clients.google.com" and everything works fine with google.
- Rotation is upside down. Apps, that rotate to landscape (plex, for example) rotate so that the camera is at the bottom side, not on the upper side. So sound is reversed, and speaker are looking down instead of up.
btw - this rom installs fine, not complaining about failed symlinks like the "HDX_Nexus_ROM_Thor-v4.0.3-B02.zip" does ...
good job!
ps: i was a bit irritated regarding the missing root app, but then i read your post#1
Click to expand...
Click to collapse
Thanks for letting me know, is it possible for to you try SMS and a phone call?
@sn123py - For your apps that rotate upside down try locking the orientation the correct way up first then start your app and let me know if that works.
ggow said:
Thanks for letting me know, is it possible for to you try SMS and a phone call?
@sn123py - For your apps that rotate upside down try locking the orientation the correct way up first then start your app and let me know if that works.
Click to expand...
Click to collapse
send SMS: working
receive SMS: working
outgoing call: not working (call ended immediate)
incoming call: not working (get a ring-tone on the other side, but HDX keeps quit).
btw - i never got phone calls working on my hdx.
fixed tablet in landscape (with camera on the top side), started plex and rotation was ok.
sn123py said:
send SMS: working
receive SMS: working
outgoing call: not working (call ended immediate)
incoming call: not working (get a ring-tone on the other side, but HDX keeps quit).
btw - i never got phone calls working on my hdx.
fixed tablet in landscape (with camera on the top side), started plex and rotation was ok.
Click to expand...
Click to collapse
Not sure if calling can work or not on HDX hardware. Just thought I'd give it a try
SMS working is good.
Thanks for the ROM it works perfect on thor I installed it in the 1 slot an every things working WiFi and Bluetooth, sound,location is all good you are the man ggow
Well, Apollo LTE works great, in both TWRP and SafeStrap (LTE works in ANY slot btw)...
Takes about a minute to initialize the baseband and get signal, fyi.
Only sad report is that calls don't work yeah, disconnection time the moment a number is dialed.
Another champion effort @ggow
Sent from my SM-N9005 using Tapatalk
kudoz83 said:
Well, Apollo LTE works great, in both TWRP and SafeStrap (LTE works in ANY slot btw)...
Takes about a minute to initialize the baseband and get signal, fyi.
Only sad report is that calls don't work yeah, disconnection time the moment a number is dialed.
Another champion effort @ggow
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks
Do calls work on stock, has anyone ever had calling working at all?
I am wondering whether it's a limitation of the device?
ggow said:
Thanks
Do calls work on stock, has anyone ever had calling working at all?
I am wondering whether it's a limitation of the device?
Click to expand...
Click to collapse
nope. I tried just after rooting my kindle a year ago with a third party calling app. Same effect as in your current rom.
Thankyou your effort and i was install cm rom but i can't install stoc rom Install only another rom anyone who why is that result?
I have twrp installed but the bootloader is locked
Should it work nevertheless, because my tablet stops at the kindle fire logo?
aleteman said:
I have twrp installed but the bootloader is locked
Should it work nevertheless, because my tablet stops at the kindle fire logo?
Click to expand...
Click to collapse
From the OP... yes you need to unlock your bootloader.
Introduction
- This ROM is for all variants of the 3rd generation Kindle HDX tablets.
- This is primarily for users of Safestrap 4.0.1, however
- This will also work on devices with an unlocked bootloader and TWRP installed.
Click to expand...
Click to collapse
Well i wasn't 100% sure even if the phrasing is pretty clear
Guess it's time to unlock it
And thanks for your work
aleteman said:
Well i wasn't 100% sure even if the phrasing is pretty clear
Guess it's time to unlock it
And thanks for your work
Click to expand...
Click to collapse
No worries, I have changed the phrasing in the OP to make it clearer
Enjoy the ROM.
sn123py said:
nope. I tried just after rooting my kindle a year ago with a third party calling app. Same effect as in your current rom.
Click to expand...
Click to collapse
Just speculating here but it may be highly probable that the RIL libs do not support voice calling. I haven't got time at the moment to investigate. So I think for now at least this one will stay parked.
sn123py said:
Hi,
i just installed this rom on my Thor LTE Unlocked BL with TWRP and (nearly) everything is fine:
LTE works (dialog with SIM-Pin takes about 2 minutes to pop up after boot, but that is ok).
Click to expand...
Click to collapse
Update after two days with this Rom:
I had some strange messages that the sim-card was removed and reinserted and the dialog asked me to reboot the tablet to activate the changes (?!). I simply tapped the back-button several times (there were about 10 dialog-boxes stacked) and everything is still working including LTE.
just wanted to let you know.
sn123py said:
Update after two days with this Rom:
I had some strange messages that the sim-card was removed and reinserted and the dialog asked me to reboot the tablet to activate the changes (?!). I simply tapped the back-button several times (there were about 10 dialog-boxes stacked) and everything is still working including LTE.
just wanted to let you know.
Click to expand...
Click to collapse
Thanks for that, if it happens again could you get me a log and I'll look into it.
ggow said:
Thanks for that, if it happens again could you get me a log and I'll look into it.
Click to expand...
Click to collapse
could you give me a hint how to generate/find logs?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[COLOR="gray"]
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
[/COLOR]
Prerequisites for Installation
- Must have an unlocked bootloader
- Must have working TWRP
Known Issues
- MINOR - On Apollo there is a small glitch in rotation animation when screen transitions between on->off state - Fixed
- MEDIUM - Bluetooth, GPS and LTE need to be debugged
Fresh Installation
- Factory Reset
- Flash the ROM File
- Flash Open Gapps of your choice.
- Reboot
- On first boot it will take about 15-30 seconds before the boot animation appears
Upgrading to new Version
- Flash the ROM File
- Reboot
Downloads
- APOLLO rom
- THOR rom
- Open Gapps
Source Code
- Kernel Source is here.
Historical Record (Old thread contents)
Hi !
Here is cm-12.1 (lollipop 5.1.1) for the Apollo and Thor kindle fire hdx ! This is the work of @dpeddi, @ggow, @Hashcode and me.
The Apollo version is not ready yet but should be available soon.
Requirements
- Unlocked Bootloader
Installation
- See cm-11 threads for now
Bugs
- WiFi can't be enabled if disabled (reboot required)
- BT crash on disable
- LTE data should or will work @dpeddi fix merged manually may contains errors, and may need matching ril/fw/bl)
- BT should work
Downloads / Changelog
- cm-12.1-20150815-UNOFFICIAL-thor.zip
- Latest CM sources
- Uses Amazon .4.5.5 binaries
- cm-12.1-20150814-UNOFFICIAL-thor.zip
- Latest CM sources
- cm-12.1-20150522-UNOFFICIAL-thor.zip
- Latest CM sources
- Landscape locking bug fix
- Enable multi-user support (up to 5 max)
cm-12.1-20150508-UNOFFICIAL-thor.zip
- Camera fixed
- Updated to 5.1.1
- See github for more details.
cm-12.1-20150403-UNOFFICIAL-thor.zip
- Fixed lock rotation in landscape bug
cm-12-20150312-UNOFFICIAL-thor.zip
- fix lte
- fix drm (netflix, google video...) by using libwvdrmengine blob from LG G3 D855 5.x blob
- disable google video codecs (fix netflix...)
- remove audio.primary.msm8974 blob dependency
Credits
- Cyanogen
- CAF
- Hashcode, Cpasjuste and dpeddi who are awesome
XDA:DevDB Information
cm-12.1 apollo/thor , ROM for the Amazon Kindle Fire HDX 7" & 8.9"
Contributors
Cpasjuste, ggow, dpeddi, Hashcode
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-03-09
Last Updated 2017-06-01
Reserved
Reserved
Wow roms coming thick and fast now, this is brilliant thanks... do we have installation instructions and a bugs list please ?
thank you for your good job!
maybe LTE will come soon either!
Jeez... i feel like i'm playing with my Touchpad again. nice work
WOW!!!!!!!!
I have done something weird with BT on this release, its not working. I'll fix this tomorrow.
Sorry for the few leechers, i have deleted the file and re-upload with same filename to add the bluetooth fix. But at least bt should work !
Does it need to be installed on top of cm11? Tried to TWRP factory reset then install a couple of times and just got stuck of grey kindle fire logo, wiping cache/dalvik didn't help.
You should just need to wipe system and data. Did you installed the first zip ? I forget to remove some oc code in it so it could be that. Also, it could be useful for me to know if it worked for someone
Don't think I wiped system, just basic factory reset in twrp. Tried with the original zip, downloading the new one now and will wipe data too before installing.
Crossing fingers !
Cpasjuste said:
Crossing fingers !
Click to expand...
Click to collapse
No luck I'm afraid, stuck at grey logo again. CM11 installs fine but both CM12 zips won't cooperate.
derpadoodle said:
No luck I'm afraid, stuck at grey logo again. CM11 installs fine but both CM12 zips won't cooperate.
Click to expand...
Click to collapse
Hum ok :/
Then we'll have to wait for more reports to see. At least it work fine here so maybe I need to update twrp or your firmware files. By the way, what is exactly your device ? Mine is thor 16gb WiFi only, and I comes from 3.2.4 bootloader but updates non-hlos (firmwares) to 4.5.3.
Cpasjuste said:
Hum ok :/
Then we'll have to wait for more reports to see. At least it work fine here so maybe I need to update twrp or your firmware files. By the way, what is exactly your device ? Mine is thor 16gb WiFi only, and I comes from 3.2.4 bootloader..
Click to expand...
Click to collapse
Thor 16GB WiFi, latest TWRP, 3.2.3.2 bootloader (bypassed, not unlocked). I'll try a few more things and report back if I have any luck.
Cpasjuste said:
Hum ok :/
Then we'll have to wait for more reports to see. At least it work fine here so maybe I need to update twrp or your firmware files. By the way, what is exactly your device ? Mine is thor 16gb WiFi only, and I comes from 3.2.4 bootloader but updates non-hlos (firmwares) to 4.5.3.
Click to expand...
Click to collapse
Running fine for me. Tested now about 3 hrs. No big issues so far.
Mine is thor 16 gb wifi, bootloader 3.2.3 and unlocked.
Sent from my Kindle Fire HDX using XDA Free mobile app
derpadoodle said:
Thor 16GB WiFi, latest TWRP, 3.2.3.2 bootloader (bypassed, not unlocked). I'll try a few more things and report back if I have any luck.
Click to expand...
Click to collapse
I just updated the twrp recovery thread to lollipop sources, dunno if it can change something. Just be sure to have a working system before flashing it in case of problem, which should'nt happens : http://android.mydedibox.fr/hdx/twrp-recovery-hdx-thor-2.8.5.0_2015-03-09.zip
Cpasjuste said:
I just updated the twrp recovery thread to lollipop sources, dunno if it can change something. Just be sure to have a working system before flashing it in case of problem, which should'nt happens : http://android.mydedibox.fr/hdx/twrp-recovery-hdx-thor-2.8.5.0_2015-03-09.zip
Click to expand...
Click to collapse
Tried that with same results, no matter what I do always the same stuck gray logo. All other roms work without issue so I suppose I'll just have to go back to CM11 until I figure this out.
Droid_1 said:
Running fine for me. Tested now about 3 hrs. No big issues so far.
Mine is thor 16 gb wifi, bootloader 3.2.3 and unlocked.
Sent from my Kindle Fire HDX using XDA Free mobile app
Click to expand...
Click to collapse
Cool to know it work somewhere at least ! Thanks droid_1. So we will have to wait for more reports until I investigate
DISCLAIMER
We are not responsible for any damage, bootloop, bricked or broken tablets and Relationships.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team @csolanol, @diegocr & @lovejoy777
This is an unofficial SlimLP build for Amazon Fire 2015 (aka FORD).
It includes all SlimRoms features plus some added mods.
Issues
Bluetooth
Video playing
USB OTG
Camera can take pictures but not video
Orientation artifact while turning screen off
Click to expand...
Click to collapse
Notice
Art optimized v2.3 build became DISCONTINUED
Click to expand...
Click to collapse
Additional features
SuperSU built in
AdAway built in
Network traffic monitor
App icon on toast notifications
Global menu
Screen Recorder through global menu (Settings under Interface section)
Prebuilt WebView
Double tap to sleep anywhere on the lock screen
Flat app picker
Unknown source apps enabled by default
Partition information menu
Show Optimizing app dialog on first boot and package names
Show application's package name in the "App info" screen
Added DocumentsUI as a standalone filemanager
Optimized apks to slim the build
init.d support
Something i don't remember
Click to expand...
Click to collapse
Installation
Reboot tablet to bootloader: adb shell reboot bootloader or power button + volume up
Boot recovery: fastboot boot TWRP_Fire_2.8.7.0_adb.img
Wipe dalvik cache, cache, data and system if you come from stock or another rom.
Flash Rom (supersu is included)
Flash Gapps (Slim Gapps recommended)
If you use FlashFire, be sure to wipe everything and move the wipes to the top of the flashing list.
Click to expand...
Click to collapse
Upgrading
For dirty flashing i recommend cache, dalvik cache and system wipe. Flash rom and gapps and all should be ok.
Click to expand...
Click to collapse
Download
Unofficial SlimLP 0.15 (20160321): https://www.androidfilehost.com/?fid=24459283995301825
Rom (v2.3): https://www.androidfilehost.com/?fid=24269982087020873 (DISCONTINUED)
Recovery: https://www.androidfilehost.com/?fid=24269982087018181
Gapps: i recommend mini version https://www.androidfilehost.com/?w=files&flid=48212
You can find what every release includes at the xda thread: http://forum.xda-developers.com/slimroms/general/gapps-official-slim-gapps-trds-slimkat-t2792842
Click to expand...
Click to collapse
THANKS TO
SlimRoms
Cyanogenmod
ezio84
ggow
Happy flashing!!!
Device tree: https://github.com/csolanol/device_amazon_ford/tree/lp5.1
XDA:DevDB Information
SlimLP 5.1.1, ROM for the Amazon Fire
Contributors
csolanol, diegocr, lovejoy777
Source Code: https://github.com/SlimLPFord
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: SlimRoms
Version Information
Status: Beta
Current Beta Version: 0.15
Beta Release Date: 2016-02-06
Created 2015-11-24
Last Updated 2017-01-26
UPDATES:
2016/03/22
March google's security patch
Fix users not showing in global menu (circular avatar)
2016/02/06
Bump to 0.15
Added layers support back. Thanks to @lovejoy777
Dark layers theme installed by default thanks to setiawanjimmy. You can remove it with built in layers manager app or removing /system/vendor/overlay stuff.
Most of layers on play store doesn't work with this build because of themers doesn't support lp5.1 or mdpi devices. We will post some compatible themes soon.
Update to android 5.1.1_r34 with Google February security patch.
New project sources located at https://github.com/SlimLPFord (We will update the "how to build" post soon)
2016/01/7
v2.3 with ezio mods is DISCONTINUED
Unofficial SlimLP b0.14 started (Added features listed in op).
Updated to android-5.1.1_r33 with latest security patches from google
2015/12/19 - v2.3
Fix screen off glitch
Tagged as stable
20151210 - v2.2b:
Update boot.img from 5.1.1 (Thanks @k4y0z for the kernel module)
Updated MTK flags to allow video work properly (Thanks @ggow).
Fixed camera video recording (Thanks @ggow).
20151209 - v2.2:
Updated blobs from 5.1.1 OTA.
Moved selinux permissive from netd to a kernel module. Thanks to @k4y0z
Enable init.d support (Thanks to @k4y0z) on SuperSU flashing process.
Slimmed down the rom, now it's less than 193 Mb.
Fixed some dependencies.
Tested with latest slim mini gapps.
20151202 - v2.1:
Fix google play movies not allowing to play movies.
Otg fixed.
Bluetooth sound fixed. Thanks to @ggow
20151201 - v2.0:
Video playing should work now.
Camera is able to take pictures now but we broke video recording.
If you find problems taking pictures after installing google camera a reboot will fix them.
Multiuser support.
20151130 - v1.1:
Bluetooth fixed.
Build
We are not responsible for any damage, bootloop, bricked or broken tablets and Relationships.
Build SlimLP
Getting SlimLPFord
https://github.com/SlimLPFord/platform_manifest/tree/lp5.1
Extract blobs
With a Fire with latest SlimLP rom and adb connected execute
cd device/amazon/ford/
./extract-files.sh
Build
Use -j num cpus to build faster
Code:
. build/envsetup.sh
lunch slim_ford-userdebug
make bacon
Reserved
6 April 2016
this rom no longer uses ezio optimizations
09 Dec 2015:
This rom uses ezio optimizations, which causes Xposed not to work.
if you want a rom with Xposed, this rom is not for you.
If you don use Xposed, this is a very good rom.
csolanol said:
...If you want to know about ezio optimizations you can visit his github at http://github.com/ezio84 read and learn some stuff.
Click to expand...
Click to collapse
People, there is a
Feature Requests
and a
Bug Reporter
How about try using them before complaining
First let me say thanks for this ROM! I have found that I am having same issue with video on it as I had with the CM 12.1 ROM, using VLC to play videos I have to disable hardware acceleration to play any MP4 format videos and for MKV format files I have to turn it back on.
Beyond that seems quite fast and working well.
RW2112 said:
First let me say thanks for this ROM! I have found that I am having same issue with video on it as I had with the CM 12.1 ROM, using VLC to play videos I have to disable hardware acceleration to play any MP4 format videos and for MKV format files I have to turn it back on.
Beyond that seems quite fast and working well.
Click to expand...
Click to collapse
This is one of the only reasons I haven't installed one of these custom roms yet.
Just wanted to ask if it was theoretically possible for slim6 to run on the Amazon Fire?
I think that Doze will probably make this tablet into something that lasts longer than 2hrs SoT
OMG im so glad devs are starting and i can wait to test I LOVE ALL THE DEVS ON XDA THANKS and THANKS TO YOU GUYS FOR THE HARD WORK
I installed using supplied instructions and have a bug to report:
When the screen turns off it flashes the screen in the orientation 90 degrees from it's current orientation. So if it is in landscape and I press the power button, it flashes portrait and then screen off. If it is in portrait, it flashes landscape and then screen off. Totally superficial as far as I can tell, but wanted to let you know. Will continue to test.
Drax TD said:
I installed using supplied instructions and have a bug to report:
When the screen turns off it flashes the screen in the orientation 90 degrees from it's current orientation. So if it is in landscape and I press the power button, it flashes portrait and then screen off. If it is in portrait, it flashes landscape and then screen off. Totally superficial as far as I can tell, but wanted to let you know. Will continue to test.
Click to expand...
Click to collapse
Same on both custom ROMs.
Drax TD said:
I installed using supplied instructions and have a bug to report:
When the screen turns off it flashes the screen in the orientation 90 degrees from it's current orientation. So if it is in landscape and I press the power button, it flashes portrait and then screen off. If it is in portrait, it flashes landscape and then screen off. Totally superficial as far as I can tell, but wanted to let you know. Will continue to test.
Click to expand...
Click to collapse
I have the same issue on Slim, as well as CM with this device.
Guys, any luck with XPosed ?
I got bootloop after installing xposed-v78-sdk22-arm.zip, which was working on original and CM roms.
Also, I don't get random shutdowns on this rom (which made me crazy on CM)
Thanks for the effort! This is awesome.
Ordering mine tonight!!!! Can't wait til I get it.
Is Bluetooth a matter of time? Or is there a fundamental problem?
MERLev said:
Guys, any luck with XPosed ?
I got bootloop after installing xposed-v78-sdk22-arm.zip, which was working on original and CM roms.
Also, I don't get random shutdowns on this rom (which made me crazy on CM)
Click to expand...
Click to collapse
Try using Wanams xposed.
---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------
If anyone is looking to get the Fire in the US, ordering it from Best Buy online for in store pickup is the best way to go. I ordered it this morning and it is already in store whereas amazon has it backordered until December 17th+
ROM installed fine but whenever I try to open Google Play, I get ''Unfortunately, Google Play services has stopped working''.
Anyone know of a working solution?
Cheers
EDIT: I flashed a different version of Gapps and that sorted my issues out. (Slim_mini_gapps.BETA.5.1.build.0.x-20151121)
Thanks for the ROM!
Does anyone know about how to fix the vertical stretching on the screen? Is there a certain DPI we should be setting?
rjmxtech said:
Does anyone know about how to fix the vertical stretching on the screen? Is there a certain DPI we should be setting?
Click to expand...
Click to collapse
http://forum.xda-developers.com/amazon-fire/help/screen-resolution-stretching-t3239083
It seems the actual pixels in the screen aren't perfectly square.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The development of this ROM is stopped, as there is a working CM 13.0 image.
This ROM is BETA and not ready for daily use at the moment
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
First I would like to thank the following developers :
@CTXz
@RaymanFX
@BigBot96
@moonbutt74
@sub77
@hennymcc
I used his T710 image to base my build on. As soon as we can incorporate both builds in 1 tree, we will do so. (only differences seem to be configurations and the device blobs)
Before you start
THIS ROM IS ONLY FOR THE SM-T810
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
About the ROM
Current state of ROM : BETA
What is Fixed
Bluetooth shows note 4 instead of tab s2 9.7
Resolution
Touchscreen
Screen on after turning it off/timeout
Screen flicker
Screen rotation
Wifi
Internal SD card mount
External SD card mount
Sound
Headphones
Power on not working correctly, only via 'download mode' and then cancel
Magnetic cover not working
What is not working
Important
MTP
Camera not working when coming from stock Android 6.0.x image.
Minor
On some T810 devices camera is reported not to work or only once (on mine it works fine, hardware differences?)
SU not available after reboot (change setting under developer menu back and forth to old setting and it works or installing supersu from app store)
Edit /data/local/userinit.sh to work around this is also an option
Code:
#!/system/bin/sh
/system/xbin/su --daemon &
GPS
Some sensors are available, but not used (light, proximity)
Screenlock ignores screen rotate. (rotates back just before lock)
Microphone
Instructions
How to install CM12.1
If you don't have TWRP yet, get it from here : TWRP by ashyx
Download the ROM and the Gapps that are located below to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home and select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home and select the ROM
After you selected the ROM swipe below to install it
After the ROM has installed flash the Gapps
When all of this is done, reboot into system, wait, and enjoy CM12.1
How to recover from issues
Looks like the reset to recovery (<HOME><VOL-UP><POWER>) is still broken on some or all T810 devices with this build.
Press and hold <HOME><VOL-DOWN><POWER> to enter 'download' screen.
Select cancel <VOL-DOWN>
Immediately press and hold <HOME><VOL-UP><POWER> to enter TWRP
Restore back-up made during installation phase
How to ROOT
In CM 12.1 Enable the developer options
Select Root access
Select Apps Only
Done
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of CM's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Changelog
Code:
**********
16/06/2016 - Started again to check differences with cm-13.0, Included aosp-base in cm makefile.
**********
12/06/2016 - Switched to developing CM-13.0. Work on this ROM is stopped.
**********
07/06/2016 - Switched to European ntp pool in ntp.conf. (gps still not working :( )
- Added several system.prop settings including one for the front camera. Switch back to front and v.v. works in cm app.
**********
06/06/2016 - Cleaned up proprietary files included.
- Added prop Noise suppression libraries
- libsensorservice removed from prop files, so is has to be provided by cm.
**********
05/06/2016 - Slight EGL changes
**********
04/06/2016 - Enabled CPU sets
- Samsung specific power HAL instead of universal.
**********
02/06/2016 - Camera rotation fixed.
**********
01/06/2016 - De-commonized sources, magnetic cover fixed
- Camera sensor is available, image rotated.
- Default IO scheduler changes from CFQ to noop. (HAL optimizes IO, no need for kernel to do this)
**********
30/05/2016 - Recompile 18/04/2016 state of tree with correct dtb.img
- Power on works as it should, not via Download menu
**********
25/05/2016 - Recompile 18/04/2016 state of tree with security patches from may 2016
**********
24/03/2016 - Changed values for light sensor (looks like adaptive light does something)
**********
21/03/2016 - Recompile with 1-3-2016 android security patches
**********
06/02/2016 - Disabled selinux, got to much issues
- Headphones work
**********
06/01/2016 - Enabled selinux, defaulting permissive
**********
03/01/2016 - Enabled selinux
- To be able to use the device, add "/system/bin/setenforce Permissive" to /data/local/userinit.sh
Without it at no wifi and gps, probably also no sound.
**********
28/12/2015 - Audio works
- GPS
**********
25/12/2015 - reverted useless change in fstab.samsungexynos5433 (and build to check if all works as it did)
**********
24/12/2015 - removed gsm libraries (T8100 has no sim)
- Fixed external sdcard mount
**********
22/12/2015 - internal storage
**********
19/12/2015 - Screen rotation
- Wifi
**********
16/12/2015 - Fixed screen flickering.
- Tablet can be turned on after screen off.
**********
14/12/2015 - Fixed screen orientation so touch screen and LCD have same orientation.
**********
13/12/2015 - CM12.1 Booted for the first time
**********
Downloads
Latest CM 12.1 build : https://www.androidfilehost.com/?fid=24591020540821915
All CM 12.1 releases can be found here : https://www.androidfilehost.com/?w=files&flid=45563
All CM 12.1 pre-alpha releases can be found here : https://www.androidfilehost.com/?w=files&flid=45564
All CM 12.1 alpha releases can be found here : https://www.androidfilehost.com/?w=files&flid=46097
All CM 12.1 beta releases can be found here : https://www.androidfilehost.com/?w=files&flid=49273
Recommended GAPPS by opengapps.org : http://opengapps.org/
Source
Special Thanks to @RaymanFX for releasing his Exynos 5433 source, without him this ROM would most likely not be possible!
All my sources can be found here : https://github.com/Galaxy-Tab-S2
Screenshots
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
XDA:DevDB Information
CyanogenMod 12.1 for Samsung Galaxy Tab S2 9.7 T810, ROM for the Samsung Galaxy Tab S2
Contributors
T_I,CTXz, Sub77, Moonbutt74, RaymanFX, Hennymcc
Source Code: https://github.com/KoffieNu being transferred to https://github.com/Galaxy-Tab-S2
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-12-14
Last Updated 2016-06-07
XDA:DevDB Information
CyanogenMod 12.1 for Tab S2 9.7, ROM for the Samsung Galaxy Tab S2
Contributors
T_I, CTXz
ROM OS Version: 5.1.x Lollipop
Based On: Cyanogenmod
Version Information
Status: No Longer Updated
Created 2015-12-14
Last Updated 2016-06-16
Reserved
Reserved 2
Nice. I am mooving most of stuff to the git group. When i'm home, I'll commit the kernel patches.
For those who want to see the image boot without spending a lot of time, check YouTube. (Quality of the recording is pretty bad though)
WOW! Great work! Once we have Wifi working, this will be my Daily driver! Thanks for doing this
suzook said:
WOW! Great work! Once we have Wifi working, this will be my Daily driver! Thanks for doing this
Click to expand...
Click to collapse
For me the touchscreen is the main focus point now. (Wifi and screen glitches fixed would make it usable as a daily for me) Got the firmware and other blobs from a T810 Android 5.1.1 image (Canadian), we'll see what's the result of this compile.
Edit: recompile didn't fix the touchscreen, manually adding the 'system.prop' part of the original build.prop to the build.prop file and reboot helped with the touchscreen. Now to get it in the build atomagically and fix the wifi. (Can turn it on, won't stay on)
A quick teaser...
Screen stays off after timeout, but touchscreen issue was due to 270 degree difference between lcd and touch panel, a config setting which has been added to the sources.
Sent from my SM-T810 using Tapatalk
T_I said:
A quick teaser...
Screen stays off after timeout, but touchscreen issue was due to 270 degree difference between lcd and touch panel, a config setting which has been added to the sources.
Click to expand...
Click to collapse
Very cool, looking fwd to future updates -thanks for your work here :good:
T_I said:
A quick teaser...
Screen stays off after timeout, but touchscreen issue was due to 270 degree difference between lcd and touch panel, a config setting which has been added to the sources.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
Very awesome! All we need is WiFi to dd! Woo hoo!
T_I said:
A quick teaser...
Screen stays off after timeout, but touchscreen issue was due to 270 degree difference between lcd and touch panel, a config setting which has been added to the sources.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
Is the latest build posted the one with the touchscreen fix?? Would like to mess around with it. Thanks.
suzook said:
Is the latest build posted the one with the touchscreen fix?? Would like to mess around with it. Thanks.
Click to expand...
Click to collapse
That is the cm-12.1-20151214-UNOFFICIAL-gts210wifi.zip, yep, touchscreen is fixed, screen flickers and you need to be fast to disable the screen timeout to be able to do something with it. As soon as the screen goes dark, it stays dark until you reboot. It is a build of the T710 version from @CTXz with just some very minor changes to get it running on this tablet. (Mainly codename and screen rotation) @CTXz pushed a T810 kernel to the new repo, will test that one tonight or tomorrow.
BTW make sure you have a backup and read the recovery section, regular reboot to TWRP didn't work on my device.
Ok, small update, screen flicker is solved, tablet can be turned on again after screen goes off. However, rotation doesn't work. Not sure if I broke it or it didn't work to start with. Will work on it tomorrow.
T_I said:
Ok, small update, screen flicker is solved, tablet can be turned on again after screen goes off. However, rotation doesn't work. Not sure if I broke it or it didn't work to start with. Will work on it tomorrow.
Click to expand...
Click to collapse
Very nice....cm on this tab is awesome!!!! Can't wait till we get WiFi. Keep up the great work.
I know asking for ETA's is a big NO NO, but just wondering if any progress is being made on WIFI? Thanks
suzook said:
I know asking for ETA's is a big NO NO, but just wondering if any progress is being made on WIFI? Thanks
Click to expand...
Click to collapse
If you know ETA's are a big big no then don't ask them. We will announce any changes with wifi.
CTXz said:
If you know ETA's are a big big no then don't ask them. We will announce any changes with wifi.
Click to expand...
Click to collapse
C'mon, Wi-Fi should've been fixed by now and you should be working on custom features at this point. /end sarcasm ?
Sent from my not-so-stock SM-T810
kisypher said:
C'mon, Wi-Fi should've been fixed by now and you should be working on custom features at this point. /end sarcasm ?
Sent from my not-so-stock SM-T810
Click to expand...
Click to collapse
I was about the get crazy until I read the end xD
It's been quiet for a while, been learning a lot last week, however, mostly what doesn't work. I hope to get my build environment back to a correct state and build an image that is in the same state as the one on the 16th.
This is a first, developing cm myself. I'm getting frustrated with the way git works. (or at least, it's counter intuitive to me, so I messed up a bit and reverting to an older state is not that straight forward as I would expect it to be) I'll get there eventually, but it's slower then I would like.
Priority list for me:
Getting build environment under control so I get something bootable again
Rotation
SD card
Wifi
Just got the wifi working on the T710. Fix will be applied to the T810 and should work too
As Cyanogen pulled the plug on CyanogenMod, this project will continue under Lineage OS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This ROM is Alpha and not ready for daily use at the moment
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
First I would like to thank the following developers :
@RaymanFX
@CTXz
I used @RaymanFX's T815 image to base my cm 13.0 build on, which in turn is the base of this cm-14.1.
Before you start
THIS ROM IS ONLY FOR THE SM-T810
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
About the ROM
Current state of ROM : testing
Everything except what's reported below is working (or not yet reported as not working).
What is Fixed
In '20-09' build reboot to recovery triggers message 'Factory reset'. (wrong messagem not resetting)
Camera not working in selinux enforcing
Front facing camera unable to save image
Bluetooth not working
Hardware codecs not working (fallback to software for mp3/flac works)
Limited wifi 5GHz support (channels above 100 give issues)
Video recording not working? (not tested on T810, reported not working on T815)
What is not working
Important
Fingerprint scanner not working
Minor
Compass is 180 degrees mis-aligned
Mic not working (no input routing)
Instructions
How to install CM13.0
If you haven't run stock Android 6.x, flash that first with odin. (image won't boot without this step)
If you don't have TWRP yet, get it from here : TWRP by ashyx
Download the ROM and the Gapps that are located below to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home and select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home and select the ROM
After you selected the ROM swipe below to install it
After the ROM has installed flash the Gapps
When all of this is done, reboot into system, wait, and enjoy CM12.1
How to ROOT
In CM 14.1 Enable the developer options
Select Root access
Select Apps Only
Done
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of CM's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Changelog
Code:
**********
08-12-2016 - Compile with curren cm-14.1 source and [URL="https://review.cyanogenmod.org/#/c/173951"]this patch[/URL].
**********
25-11-2016 - Cm-14.0 is abandoned upstream, limiting uploads to cm-14.1.
- Recompile with camera fix merged in cm sources.
**********
21-11-2016 - Fixed camera (again).
**********
20-11-2016 - Broke camera in enforcing mode (unable to save picture).
**********
17-11-2016 - Recompile from clean tree, camera and youtube work now.
- Confirmed lock-screen-rotate fixed, but only after clean flash and [b]no restore of device ID[/b].
**********
14-11-2016 - First succesful cm-14.1 boot. (Switched project to cm-14.x)
**********
31-10-2016 - Selinux set to enforcing.
**********
12-10-2016 - Disabled telephony that got included regardless specifying I don't want it.
- Fixed several bluetooth issues
- Removed use of old api (v1) by camera
**********
03-10-2016 - First build with cm-14.0 release (previous were staging builds)
- Fixed bluetooth
**********
25-09-2016 - Fixed selinux contexts for camera so it works in enforcing mode
- Fixed front facing camera so it is able to save images.
**********
22-09-2016 - Reboot to recovery now triggers correct message
- 2nd build selinux permissive.
**********
20-09-2016 - 1st cm-14.0 build
**********
Downloads
Latest CM 14.1 build : https://www.androidfilehost.com/?fid=673368273298915423
All CM 14.1 releases can be found here : https://www.androidfilehost.com/?w=files&flid=128488
Recommended GAPPS by opengapps.org : http://opengapps.org/ (I use pico)
Source
Special Thanks to @RaymanFX for releasing his Exynos 5433 source, and already patching the common sources to cm-14.0, without him this ROM would most likely not be possible!
All my sources can be found here : https://github.com/CyanogenMod/android_device_samsung_gts210wifi
Screenshots
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
XDA:DevDB Information
CyanogenMod 14.1 for Tab S2 9.7 wifi, ROM for the Samsung Galaxy Tab S2
Contributors
T_I, Raymanfx, CTXz
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Android 6.x flashed at least once before install
Based On: Cyanogenmod
Version Information
Status: Alpha
Created 2016-09-22
Last Updated 2016-12-29
Nice! Thank your very much for this early build!
I will try it as soon as I am able.
Sent from my SM-T810 using XDA-Developers mobile app
GO hard brother, thanks for all your efforts!
I've been using cm-14 since the 20-9 build, it's running pretty stable, although it's even more stable with selinux in permissive. Looks like some contexts have changed a bit in cm-14. (or the camera and some other routines ignore them)
I found 1 game not playing nicely with Nougat, CSR Classics, but the racing set from CSR work nicely, so I think that's a CSR related bug.
Fixed camera so it'll work in selinux enforcing (not yet activated) and front facing camera is able to save images.
Updated OP.
Awesome thank you!
@T_I Thought you might like 2 comments re your really great adaptation of CM14. Have been using your CM13 nightly downloads for about the last 5 weeks on my T810 and was so pleased with the result that I was slightly hesitant about trying CM14, however this afternoon I took the plunge and installed it as per your instructions. First impression is that I can hardly believe how problem free the installation of the Rom and the Open Gapps 7.0 pico proved to be.
I don't have a huge number of apps installed, about 30, but with one exception they are all performing as scheduled and I couldn't be more pleased, the one app that doesn't work is "Set CPU", there is no "forced closure", no error message, it just doesn't work. There are no forced closures of any other app including the Google Play & Services.
One point which might interest you as you mentioned it in your "OP" notes. I play mp4 movies using the app "MX Player Pro" with the Arm 7 codec installed and they play using the HW+ codec perfectly,
Was initially disappointed that "Theme Chooser" was missing from "Settings" but I can live with that considering how well everything else performs.
Once more congratulations on a really superb "port".
EDIT on 09.27.... @T_I I know this point is insignificant and pure "eye candy" but I love the touch ..... I'm talking about when one connects a usb connection from PC to S2 then the "icon" displayed at top left is now "N" (for Nougat ?) instead of the normal CM icon.
planning to attempt with the t710 again?lol
NalNalas said:
I've had this flashed since last night, and the battery so far has been great. Thanks a ton for this.
Click to expand...
Click to collapse
How much better would you say the battery life has been?
Would also appreciate input from anyone else whos noticed a difference (good or bad) with the battery life.
This ROM is working great so far!!
samsung_xoom said:
planning to attempt with the t710 again?lol
Click to expand...
Click to collapse
I can run a cm-14 build for T710 to see if that one boots.
I can test it and let you know , in my limited time I have lol
This rom is very stable, fast and reliable. The battery life is excelent. I use it as my daily driver since sept. 22!!! (Now i have a sept. 27 update)
Thanks T_I for your hard work!!!
Uploaded new image. @RaymanFX got bluetooth working on his device and the fix works on T810 as well. Also CM switched cm-14.0 from staging to release. There is still work to be done, but build shows working bluetooth (at least I can connect a keyboard and that one works).
I noticed crashing phone app and saw one ExchangeServices crash. (don't use both) Updates OP.
Latest build works wonders after I deleted from /system/app and /system/priv-app all the apks related to telephony/SMS/MMS/etc. for my T810.
EDIT: After some time, it all came crashing down, Play Services didn't like the removal of the packages, and some apps auto-removed themselves. Better wait until dev ships out another build.
Just tried to install the Oct 3 version of this ROM and as soon as it boots a box appears saying "com.android.phone has stopped". No matter how many times I click OK, the message just reappears and I can't get past it. Even have to use the power-home-vol- button combination to power off. This is on a T810 after full wipe, install ROM and install 7pico gapps. Tried the install three times. Coming from cellular south 6 ROM.
Please don't forget T710....
lewmur said:
Just tried to install the Oct 3 version of this ROM and as soon as it boots a box appears saying "com.android.phone has stopped". No matter how many times I click OK, the message just reappears and I can't get past it. Even have to use the power-home-vol- button combination to power off. This is on a T810 after full wipe, install ROM and install 7pico gapps. Tried the install three times. Coming from cellular south 6 ROM.
Click to expand...
Click to collapse
I got the same message, but can mute. Don't know where it comes from. I was working on the staging version of cm-14 and switched to the release version. Looks like there are some bugs left. (it's now less stable then with the staging cm-14)
T_I said:
I got the same message, but can mute. Don't know where it comes from. I was working on the staging version of cm-14 and switched to the release version. Looks like there are some bugs left. (it's now less stable then with the staging cm-14)
Click to expand...
Click to collapse
Just by clicking the OK button? Message just pop right back up when I do that.
lewmur said:
Just by clicking the OK button? Message just pop right back up when I do that.
Click to expand...
Click to collapse
I get the message with the 2 options 'stop application' and 'Mute until reboot'. The Mute option silences the warnings, but the app will still misbehave.
Exchange services I've been able to freeze, the phone app is also used for syncing contacts and I think calendar.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Nokia 7 Plus [Onyx]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Ril
Wifi
Mobile data
Double tap to wake
Double tap to sleep
Adaptive brightness
Dark theme
Ambient display
Flash light
Sound / vibration
Camera
Volte
Selinux - Enforcing
Fingerprint
Known issues
All fixed for now . comment below if you face any bugs
DON'T FLASH GAPPS, ALREADY INCLUDED
Installation procedure
Note - I don't recommend you people to flash any other custom kernels on this ROM .
Click Here for Installation process
Credits
* Thanks to my Contributor Hritik utekar who supported from back and worked hard to get this brand new OTA Updater application.
* Pixel Experience & CO (For Source Code)
* All the authors in my git sources
* Nokia For Prebuilt Vendor , Pie Kernel Source & Q beta prebuilt kernel
* Moderators (For Giving Freedom To Post Threads)
Download Rom
Download Official Twrp
Android OS version: 10.0.0_r41
Security patch level: August 2020
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
screenshots
Pixel experience Q beta initial build is Up
For Nokia 7 Plus
Code - Onyx
Changelog
1. Initial Q beta build
2. Based on Q beta vendor.img
3. System blobs from 4040
4. October security patch
5. Selinux - enforcing
6. for Installation procedure go through installation section once
Hi dev, thanks for your work. I had two major problems when testing this build.
1. Connected bluetooth headset doesn't play sound. I tried Sony WH-1000XM3, which shows LDAC with no sound, and OnePlus bullet wireless 2, which should use aptx-HD but seems using SBC and also no sound.
2. The default launcher shows the app you choose to hide, which is as same as the HMD internal build 4040.
Mr_404 said:
Hi dev, thanks for your work. I had two major problems when testing this build.
1. Connected bluetooth headset doesn't play sound. I tried Sony WH-1000XM3, which shows LDAC with no sound, and OnePlus bullet wireless 2, which should use aptx-HD but seems using SBC and also no sound.
2. The default launcher shows the app you choose to hide, which is as same as the HMD internal build 4040.
Click to expand...
Click to collapse
because we used prebuilt hmd-vendor.img from 4040 as you mentioned.
once after stable release i will replace with stable vendor.img
reason behind this is without Q vendor.img and Q kernel we can boot but 50% of the rom is buggy so i used beta Q vendor & kernel to make rom stable as soon as possible some how this is just initial build. 99% rom is fine 1% belongs to new bugs which you people comment below here
Raghu varma said:
because we used prebuilt hmd-vendor.img from 4040 as you mentioned.
once after stable release i will replace with stable vendor.img
reason behind this is without Q vendor.img and Q kernel we can boot but 50% of the rom is buggy so i used beta Q vendor & kernel to make rom stable as soon as possible some how this is just initial build. 99% rom is fine 1% belongs to new bugs which you people comment below here
Click to expand...
Click to collapse
OK, thanks for the info
Mr_404 said:
Hi dev, thanks for your work. I had two major problems when testing this build.
1. Connected bluetooth headset doesn't play sound. I tried Sony WH-1000XM3, which shows LDAC with no sound, and OnePlus bullet wireless 2, which should use aptx-HD but seems using SBC and also no sound.
2. The default launcher shows the app you choose to hide, which is as same as the HMD internal build 4040.
Click to expand...
Click to collapse
meaning that i won1t be able to play music and send/receive calls through my car's bluetooth?
Play store app not installing
bharath moram said:
Play store app not installing
Click to expand...
Click to collapse
Man gapps already included huh :/ read thread properly
donjamal said:
meaning that i won1t be able to play music and send/receive calls through my car's bluetooth?
Click to expand...
Click to collapse
I can receive the calls voice, but music
thank you for the effort, i have flashed the rom. i have below questions to post:
1. the rom does not support hot-plug of SIM, whenever i plugin my sim card , reboot is needed.
2.after flashed the rom, i could not receive or send any msg (service provider is 'China Telecom'), but when i plugin another SIM card(China Unicom) ,i can send or receive msg. i need to plugin both SIM cards to activate msg function, then i can use my china telecom card.
3. when i press power button to wake my device, the animation will pop from the bottom left of screen, will be a little stuck, top screen and right screen will be black. after about 0.1s , it will back to normal
sensenshibendan said:
thank you for the effort, i have flashed the rom. i have below questions to post:
1. the rom does not support hot-plug of SIM, whenever i plugin my sim card , reboot is needed.
2.after flashed the rom, i could not receive or send any msg (service provider is 'China Telecom'), but when i plugin another SIM card(China Unicom) ,i can send or receive msg. i need to plugin both SIM cards to activate msg function, then i can use my china telecom card.
3. when i press power button to wake my device, the animation will pop from the bottom left of screen, will be a little stuck, top screen and right screen will be black. after about 0.1s , it will back to normal
Click to expand...
Click to collapse
Same to you, and Can you open NFC?
sensenshibendan said:
thank you for the effort, i have flashed the rom. i have below questions to post:
1. the rom does not support hot-plug of SIM, whenever i plugin my sim card , reboot is needed.
2.after flashed the rom, i could not receive or send any msg (service provider is 'China Telecom'), but when i plugin another SIM card(China Unicom) ,i can send or receive msg. i need to plugin both SIM cards to activate msg function, then i can use my china telecom card.
3. when i press power button to wake my device, the animation will pop from the bottom left of screen, will be a little stuck, top screen and right screen will be black. after about 0.1s , it will back to normal
Click to expand...
Click to collapse
i agree with your points. well having some issues from rom sources side and device sources side too they are still in beta stage and iam still in initial stage. can we expect some time? Mr. mate?
Thanks for the reply bro, sure I have plenty of time to wait and try your excellent ROM. I am looking forward to your update ?
I just installed the rom.its smooth and the battery seems fine to me (will update if I see problems.) When you wake the phone the wallpaper goes from the bottom right and it's kinda glitchy.The sim card is a bit finiky as well as once I rebooted I lost access to my sim card and I could only get it back if I put the sim tray out of the phone and rebooted while putting it back in. Everything else seems to work ok at the moment.
I did have a problem installing though as when I switched slots to install the kernel it brought me to stock recovery and when I switched slots to go back to twrp it froze so I had to boot twrp from download mode and install from there.
My model is Ta 1055 (single sim) and it does thinks it's a dual SIM.
Thanks a lot for the ROM, you are a real help for the Nokia 7 plus community and I appreciate the effort you put into these ROMs and recoverys!
Raghu varma said:
i agree with your points. well having some issues from rom sources side and device sources side too they are still in beta stage and iam still in initial stage. can we expect some time? Mr. mate?
Click to expand...
Click to collapse
Haven't tried the roms but thank you very much for keeping this sub alive!!!
mikie_kelly said:
I just installed the rom.its smooth and the battery seems fine to me (will update if I see problems.) When you wake the phone the wallpaper goes from the bottom right and it's kinda glitchy.The sim card is a bit finiky as well as once I rebooted I lost access to my sim card and I could only get it back if I put the sim tray out of the phone and rebooted while putting it back in. Everything else seems to work ok at the moment.
I did have a problem installing though as when I switched slots to install the kernel it brought me to stock recovery and when I switched slots to go back to twrp it froze so I had to boot twrp from download mode and install from there.
My model is Ta 1055 (single sim) and it does thinks it's a dual SIM.
Thanks a lot for the ROM, you are a real help for the Nokia 7 plus community and I appreciate the effort you put into these ROMs and recoverys!
Click to expand...
Click to collapse
well wallpaper glitch & stuff is from rom source side. hehe even i sawn that bug in redmi note 7 pro & remdi note 5 pro too. so comming to the kernel flashing & stuff ? after flashing rom.zip change to alternative slot & reboot to bootloader and boot in to twrp again and now flash kernel.zip and wipe everythin except system & vendor & reboot system
make sure you are using mine official twrp from official twrp thread .
Raghu varma said:
well wallpaper glitch & stuff is from rom source side. hehe even i sawn that bug in redmi note 7 pro & remdi note 5 pro too. so comming to the kernel flashing & stuff ? after flashing rom.zip change to alternative slot & reboot to bootloader and boot in to twrp again and now flash kernel.zip and wipe everythin except system & vendor & reboot system
make sure you are using mine official twrp from official twrp thread .
Click to expand...
Click to collapse
I am using your build when i installed your twrp using the installer I only did it once and not on the two slots. Was I supposed to do it twice for each slot?
Could you share screenshots of the camera app? Is the Nokia Camera App included?
This needs unlocked bootloader ???