Just got the Supcase today. It comes with 3 interchangeable back plates. The case looks like a cross between an Otterbox Defender and a Spigen Slim Armor. It comes with a built-in screen protector, but I removed the portion covering the display since I already had a screen protector installed. The top portion of the protector around the front facing camera is still present. It also has plastic protectors over the rear camera, laser auto-focus, and led flash. Similar to the front protector, they're likely easy to remove, but I chose to leave them on.
I mainly got it for the port covers since the G4 will be in dusty environments. The port covers appear to be staying in place fine. However, some people on Amazon have reported that the port covers don't stay in place with their leather-backed G4. The case has a layer of black mesh over both mics and the IR blaster. The earpiece and back speaker are also covered. Audio still comes through fine. In addition, the back buttons are covered, but they remain easy to press. Not easy enough though where you have to worry about accidental presses while in the pocket.
Keep in mind that water resistance is not the same as water proof. This case is not made to be in water. I attached some pics to this post, but more can be seen at the imgur link below.
LG G4 Supcase
Extra Info: This case does seem to work fine with a tempered glass screen protector. Without actually installing the tempered glass and just laying it over the display, the case was able to close fine.
Nice one. Tnx
How is the side grip and do you find the case significantly thicker than other cases? Thanks for the great pictures!
DarkMage619 said:
How is the side grip and do you find the case significantly thicker than other cases? Thanks for the great pictures!
Click to expand...
Click to collapse
I would say the side grip is pretty good. The tpu section along the sides has a matte finish.
At the moment, I only have two other cases for the G4. One is the Neo Hybrid and another is a thin clear tpu case. It is definitely thicker than the Neo Hybrid, but I wouldn't consider it too bulky of a case. I can still use the phone fine one-handed with the Supcase installed. I attached a pic below comparing it to the Spigen case.
That looks just like a Otterbox Denfender with some extra features. The back cover's I don't care for changing out but I can see it's a nice added feature to some. I like on the back how it covers up everything nice and close compared to the Denfender like the Camera and everything that is nice. I also see it has like a mesh those parts I might try to do something with my Otterbox like that also seen it on the bottom mic. I work in construction and just hate to to get the G4 trashed, I was able to keep my Note 2 for over 2 years in perfect condition with an Otterbox Defender but did require me cleaning it 1x a week to get the dust build up out around open inputs. I was going to keep my Note 2 and just change Sims in the morning from phone to phone but that's a PIA the Defender Note 2 case is really hard to get off compared to the G4.
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
BDestroyer8418 said:
That looks just like a Otterbox Denfender with some extra features. The back cover's I don't care for changing out but I can see it's a nice added feature to some. I like on the back how it covers up everything nice and close compared to the Denfender like the Camera and everything that is nice. I also see it has like a mesh those parts I might try to do something with my Otterbox like that also seen it on the bottom mic. I work in construction and just hate to to get the G4 trashed, I was able to keep my Note 2 for over 2 years in perfect condition with an Otterbox Defender but did require me cleaning it 1x a week to get the dust build up out around open inputs. I was going to keep my Note 2 and just change Sims in the morning from phone to phone but that's a PIA the Defender Note 2 case is really hard to get off compared to the G4.
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
Click to expand...
Click to collapse
Check out my thread on the unicorn beetle supcase. Comes with a holster. May be more inline with what you're looking for.
BDestroyer8418 said:
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
Click to expand...
Click to collapse
It doesn't come with a belt clip holster and I'm not sure about compatibility with other holsters. The other Supcase Mike mentions does come with a belt clip so you could check that one out. It may not provide as good protection from dust as the case I reviewed, but it's still certainly rugged.
I contacted them they said they don't sell the Holster on it own and the holster is just for the Beetle case.
BrunoSlivar said:
Nice one. Tnx
Click to expand...
Click to collapse
Here it is with the tempered glass fully installed. Case still closes fine :good:
Just wanted to say I picked this case up along with the Beetle Case that has the belt clip. The Water Resistant Case does indeed work the the Beetle belt clip it is a snug fit but it does lock down with the screen side facing in just like the Beetle. It also locks in good with the Otterbox Defender belt clip when the screen is facing in. It will not lock down with screen out on the Otterbox clip but it would be fine if you were just using the belt clip with the kickstand on a table.
Between the 2 Supcase's not sure which one I liked better will do some testing but at first I would say the Water Resistant Case I could really do without the removable back covers and rather just have something like the Beetle and that would be great. I also see on the Leather back it left 4 little marks on the bottom of the leather back. I would have to take pictures to really show what and why it caused it but it's not a big issue to me you could barley see it and I'm sure a small file would fix the issue. At first the button port cover's did not close all the way too fix that just pull on them a little and they lock in fine. I could see this becoming my daily case for work or atleast when we work outside or in really dusty conditions which is often.
Compared to the Defender it's hard to tell since I've had the Defender since Week 1 and these cases for 1 hour. Hands down the G4 Defender is the best Otterbox case I've had or seen in person. Most my friends don't use cases or they just use a slim case so I'm comparing it to my Note 2 and past phones. The fit and everything for the G4 Defender is good. The Belt clip adds a little more bulk to the overall size compared to the Beetle or Water Resistant case with the belt clips that's because the Otterbox is designed to lock the phone in both ways Face in and Face out. I never really use the belt clip with Face out unless I am using the kickstand to watch a video and 90% or more of the time I'll just hold it or lay it some other way since it's usually to vertical with the clip.
The Beetle is nice as well but I'm not sure if it just my case or if it's from the Leather back but I find the rubber shell not locking in really tight on the right side if I were to just run my finger off the side of the case it would come undone like you were trying to remove the case. Also it doesn't have that little cutout on the bottom right corner like the Water R case I found that a nice feature to remove the case. I will try again without the back to see if it helps at all. I still haven't removed the Plastic Screen protectors on these 2 cases so that might help since I already have a temper glass one on.
If I was looking right now and didn't already have the Defender then both of the Supcase's are great for similar feature's and slightly less bulk if you use a belt clip . I always use the belt clip to help protect the screen I just clip it on my pocket of my pants. Since you can get both of them for cheaper then just the Defender case it wouldn't be bad idea to get both. I also seen a few eBay sellers that had the Water R case with Free ship for about $12 were I got mine alot better than Amazon price.
I will for sure keep the Water R case but will have to decide on the Beetle in a few days. If anything I will be keeping it just for the Belt clip if I don't really like it unless Supcase will sell one or fine one for cheap but hate to keep it for the belt clip only when I bought it for $19 and the Water R case only for $12.50 even together less than $32 is not a bad deal at all. Just hate having collection of case's sitting around since I will most likely be getting a Extended Battery to use at times as well.
fast update - the beetle does fit the correct way without the leather back I will try some more with the leather back to see if it might just stretch a little over time.
Also Wireless charging working fine with all 3 case's.
Although this looks so tempting, unfortunately I am too worried to use such cases. Especially after my Water resistant Z1 got water damage! and that phone was sealed!
emiratesson said:
Although this looks so tempting, unfortunately I am too worried to use such cases. Especially after my Water resistant Z1 got water damage! and that phone was sealed!
Click to expand...
Click to collapse
Not sure about that phone but this case is really just meant for splashes of water. Basically any case that cover's the port's would be the same but this one covers up your camera lens so should help to take a little more water than other Water R case's but they should never be submerged in water .
I did find 1 issue with the case on taking pictures with a flash atleast Indoor's in low light haven't tried it elsewhere. If taking a picture in landscape with the top of the phone on left hand the bottom left corner and top right a little has a shadow to the picture's like the flash doesn't get all the way through or something hard to explain. In portrait it I did not see it happening. Also with No flash it did not happened in either mode.
il buono said:
Here it is with the tempered glass fully installed. Case still closes fine :good:
Click to expand...
Click to collapse
Can you please tell me which tempered glass screen cover you have on your LG G4? Thank you.
emiratesson said:
Although this looks so tempting, unfortunately I am too worried to use such cases. Especially after my Water resistant Z1 got water damage! and that phone was sealed!
Click to expand...
Click to collapse
As I mentioned in the OP, water resistant is not the same was a water proof case. This case is not meant to be in water. As mentioned by @BDestroyer8418, this case just protects from splashes.
dgator said:
Can you please tell me which tempered glass screen cover you have on your LG G4? Thank you.
Click to expand...
Click to collapse
It's the Yootech tempered glass
il buono said:
As I mentioned in the OP, water resistant is not the same was a water proof case. This case is not meant to be in water. As mentioned by @BDestroyer8418, this case just protects from splashes.
It's the Yootech tempered glass
Click to expand...
Click to collapse
are you a reviewer that have the right to have thing to review for free ?
I have this case and the other supacase with the holster this case also fits the holster as well and clips in securely.
Sent from my LG-H815 using Tapatalk
Someone use some waterproof case with this case?
My G4 powered by Supcase with Nillkin tempered glass
powered by LG G4
Miketoberfest said:
Check out my thread on the unicorn beetle supcase. Comes with a holster. May be more inline with what you're looking for.
Click to expand...
Click to collapse
I have both cases and can confirm it small snugly into the holster it's a perfect fit
BDestroyer8418 said:
That looks just like a Otterbox Denfender with some extra features. The back cover's I don't care for changing out but I can see it's a nice added feature to some. I like on the back how it covers up everything nice and close compared to the Denfender like the Camera and everything that is nice. I also see it has like a mesh those parts I might try to do something with my Otterbox like that also seen it on the bottom mic. I work in construction and just hate to to get the G4 trashed, I was able to keep my Note 2 for over 2 years in perfect condition with an Otterbox Defender but did require me cleaning it 1x a week to get the dust build up out around open inputs. I was going to keep my Note 2 and just change Sims in the morning from phone to phone but that's a PIA the Defender Note 2 case is really hard to get off compared to the G4.
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
Click to expand...
Click to collapse
Sent from my LG-H815 using Tapatalk
If i take the screen protector will it lessen thw case's watsr resistance?
Related
I received yesterday my protection for Leo. I share with you the results of this:
http://www.flickr.com/photos/[email protected]/show/with/4210742282/
For shipping this protection:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000801&products_id=26364
Thanks for sharing; however you would have been better off posting in the Cases thread where we all go to see what's happening in the world of cases.
WB
Agree with above poster, can a mod fix this?
Nice case! ive also ordered 1 last week at PDAir, the 1 without a screen, so easy acces, but fewer protection. I am hoping its more solid so i can put it in my back pocket without getting a red face everytime i realize i accidently put it there...
When did you order it and did it took long (i am eager to get mine, but now hope is gone till monday or tuesday...)
I disagree.
The "Cases" thread is too long and too complicated for discussing any one specific case.
Anyway I ordered mine just a moment ago and would very much like to hear how quick was the shipment, how snug is the fit and how reassuring the neoprene feels
It's a shame they opted for a plastic screen protector instead of either a window-less aluminum door or a transparent cover that lets you work with the touchscreen.
mohasea said:
I received yesterday my protection for Leo. I share with you the results of this.
Click to expand...
Click to collapse
mohasea,
How thick is the plastic cover over the screen?
Does the plastic cover flex?
Do you think the plastic cover would prevent the screen being cracked if dropped screen down on ummm concrete?
Duperman said:
It's a shame they opted for a plastic screen protector instead of either a window-less aluminum door
Click to expand...
Click to collapse
I totally agree, wish they had a solid aluminum front door instead of the window cut-out covered in plastic or the other option they have of no plastic window cut-out. I would order one now,even not having my Leo yet, just because the front door was solid aluminum.
I am going to contact PDair and see if they would leave a few front doors out of the cnc cutter and have a full cover aluminum
Would you like one too, Duperman ?
Thank you,
Monnie
I have ordered an open screen case despite it may not fully protect the screen. HD2 has a glass screen and it is hard enough against scratch as what has been in iphone.
Would you like one too, Duperman?
Click to expand...
Click to collapse
Absolutely
Mine, the one without screen plastic, is supposed to arrive between now and Jan 27th next year...(sometime)
take care
Anyone got theirs yet?
Would love to see some detailed photos and a review of the case pros/cons
Thank you,
Monnie
I'm debating whether to go with their leather flip case or this aluminum case...
I got this case and immediatly wished there was no plastic screen on the front door. So, I held it over some boiling water for about 2 mins and and then used my thumb nail (not kidding it was easy) to pry the plastic from the metal. The whole lot peeled off easily, i replaced the foam into the case and BAM perfect case. (be careful not to rip the foam, but if you do it will still stick back. also the foam stretched out a bit but pushed back into shape no problem. TIP: Work from the front side of the case, wedge your nail into the seem and loosen it all the way around. If it starts to get tough again, hold it over steam for a while longer.
Also.. when the plastic was still inplace and the case door was closed, there would be random screen presses and that was not cool, however now that the plastic is out, i can leave the door closed, press when I want too, AND there is no random case presses
I know this sounds like a poor fix, but it worked awesome and it looks like it was SUPPOSED to come this way.
Now all i need is for my zag shield (front only) to show up and im perfectly protected (minus water damage dammit)
awesome case guys im not kidding. you dont have to put the nubbin on in the back either so it doesnt add much bulk to teh phone. good luck yo.
Got mine too and I use the black open faced aluminum for local use and insert the whole unit;
aluminum case and all into the Maxpedition "Rat" wallet for carrying on belts etc.... http://www.maxpedition.com/store/pc/...&idcategory=11
Like it alot....
FWIW
well, do not kill me if I say so .. but it is ugly as hell.
I do not say that it does not protect the phone, or the the finishing it's not ok .. but from a slim phone with a huge screen, it looks like a bullet proof brick with a screen.
The whole idea of an elegant smartphone it's gone.
Small question: what do you hate about the original leather case?
It is elegant, slim easy to use and protect the phone in normal use conditions or small accidents.
Capdase Alumor Metal Case
Bought this silicon w/ aluminium backcover case by CAPDASE in Hong Kong, adding a more "solid" feel over the pure silicon case. It comes with a CAPDASE screen protector as well.
http://www.mobimega.com/capdase-alumor-metal-case-htc-hd2.html
Beware that the silicon case may not glue well to the aluminum backcover (I think it's the factory problem) which may leave a small gap between them when you put the phone in. I have to apply some glue to fix that myself. Apart from the case is nice and not too costly.
byronlee said:
Bought this silicon w/ aluminium backcover case by CAPDASE in Hong Kong, adding a more "solid" feel over the pure silicon case. It comes with a CAPDASE screen protector as well.
Beware that the silicon case may not glue well to the aluminum backcover (I think it's the factory problem) which may leave a small gap between them when you put the phone in. I have to apply some glue to fix that myself. Apart from the case is nice and not too costly.
Click to expand...
Click to collapse
Hi,
I am seriously thinking about ordering one for my Desire (A8181).
But what I'm not able to find, is how it works. I mean, you seem to describe the case as a silicone skin, with a metal plate sticked to it.
I thought it was more like a silicone skin with another semi-case to "clip" over the silicon....
Can you confirm if I am right or wrong?
And can you post multiple angles pictures?
Thank you, it would be much appreciated!
thanks but
so uglly
Ohh Great!
Thanks for the pictures! To me is one of the best cases i've ever seen.
I'm on my 5th day with the case, the case provides the best protection for drops and scuffs but does have a few downfalls.
Pros:
-Sleek Design, doesn't add bulk like Bodyglove.
-Waterproofs and protects ports.
-Scratch proof screen protector like ZAGG.
-Easy install and removal.
Cons:
-Screen protector installation was botched 3 times, if you mess it up like I did by getting dust on the sticky side run it under cold water and apply it wet then remove air bubbles and water with a rag.
-Screen protector bends too easy, a corner is bent upwards.
-the silicon sections of the case collect alot of dust.
-Notification light blocked if its sitting down flat.
-No grip on surfaces like body glove.
I got it for $25 on newegg including shipping. No regrets.
wcgbmd said:
I'm on my 5th day with the case, the case provides the best protection for drops and scuffs but does have a few downfalls.
Pros:
-Sleek Design, doesn't add bulk like Bodyglove.
-Waterproofs and protects ports.
-Scratch proof screen protector like ZAGG.
-Easy install and removal.
Cons:
-Screen protector installation was botched 3 times, if you mess it up like I did by getting dust on the sticky side run it under cold water and apply it wet then remove air bubbles and water with a rag.
-Screen protector bends too easy, a corner is bent upwards.
-the silicon sections of the case collect alot of dust.
-Notification light blocked if its sitting down flat.
-No grip on surfaces like body glove.
I got it for $25 on newegg including shipping. No regrets.
Click to expand...
Click to collapse
i would buy one in a heart beat if they came out with a hip holster for it. I always had otterbox cases on my blackberries.
Did you get a commuter or an impact case?
Use a belt holster for the Samsung Moment.....same size as Hero with Otterbox
xxwckdxx said:
i would buy one in a heart beat if they came out with a hip holster for it. I always had otterbox cases on my blackberries.
Click to expand...
Click to collapse
i have one but the silicone ruins it for me collects to much dust
i just hate how plaisticy the back case is...i prefer my seidio personally
Yeah, the otterbox is great, but its a dust magnet.
-------------------------------------
Sent via the XDA Tapatalk App
Ordered mine on Ebay yesterday for 12$. When you guys bring up dust are you talking about it getting dust on the case itself?
reedsw said:
Ordered mine on Ebay yesterday for 12$. When you guys bring up dust are you talking about it getting dust on the case itself?
Click to expand...
Click to collapse
In general, soft silicone rubber attracts dust due to static and then holds onto it. The Otterbox has the interior silicone liner that shows around the edges of the snap-on outer hard case.
If you're the type that carries the phone in your pocket, the rim around the screen will tend to grow hair. If you carry it in a holster (I have a generic Case Logic one meant for a Blackberry), you shouldn't have an issue.
reedsw said:
Ordered mine on Ebay yesterday for 12$. When you guys bring up dust are you talking about it getting dust on the case itself?
Click to expand...
Click to collapse
No, on the sides of the screen. It happened to me when I had my Body Glove case.
HeroMeng said:
No, on the sides of the screen. It happened to me when I had my Body Glove case.
Click to expand...
Click to collapse
Ah, yes I also had this issue with the body glove case. I don't have an issue right now though with the Otterbox.
For the dust issue there is a really easy fix, rub it off with your fingers it only takes a few seconds. Its a minor annoyance but nothing that makes the case not worth it. So far everything has been great with the case.
wcgbmd said:
Ah, yes I also had this issue with the body glove case. I don't have an issue right now though with the Otterbox.
For the dust issue there is a really easy fix, rub it off with your fingers it only takes a few seconds. Its a minor annoyance but nothing that makes the case not worth it. So far everything has been great with the case.
Click to expand...
Click to collapse
I don't actually OWN the otterbox, but I do want one.... time for an ebay search
I have had my otterbox case (commuter) for my hero for a month and a half now and love it. The case was kinda a bit thing for me as I work at a pizza joint (where we toss our own skins and make our own dough) so flour everywhere is a huge part of everyday for me. Flour has not been nice to my phones in the past completely plugging up virtually every hole available on my phones. So huge selling points for the otterbox was the cover over the headjack and usb port which work like a charm. It does collect dust in the corners but much better to have it collect there than where it can do harm. with a good screen protector on I can cover the speakers from flour also. The case feels natural in your hand and more like a part of the phone than something bulky covering it. It comes in two parts and its easy to take apart yet never comes apart with out you removing it. I pull it off and clean the small build up dust and flour every couple of days and it looks brand new again.
Well thats my review of the case. Oh yeah, one more thing for people who want one, I got mine from amazon.com shipped for $25 flat. So just incase your like me and kinda lost faith in ebay or what have you $25 on amazon is a good deal considering both otterbox.com and the sprint store sell these cases for around $50
The Otterbox Rocks!!!
I mean it!! Ok, let me tell you why!
Ive been skateboarding for a longtime and the things I've done to phones you wouldn't believe!
Ever since I got this otterbox I've thrashed my hero quite a few times from dropping it off my lap getting out of the car, falling on it from takin a crash on my board2, falling off the top of the car.
& it sat in a heavy ring of water for about 30 mins....I had no idea..lmao. Needless to say no water damage to the phone it self. Every opening ie covered and with a full scale screen protector you can make the phone look brandnew anytime you want.
I highly recommend this case! It's protected my phone ALOT!! I still have it
-------------------------------------
Sent via the XDA Tapatalk App
Picked mine off ebay for 13$. Seems to be good. Got a piece of something under the screen cover and I have a little circle off screen so no big deal. If I put the phone in my jean pocket it is covered in lint when I remove it =) Little tape or some rubbing and it all comes off.
This is my first rubber case for a phone I have owned and I have to say its pretty nice. Full functioning usb, volume, headphone jack, lights and camera while protecting the phone... cant really ask much more than that right?
Had my Otterbox case (Just Impact not Commuter) for about a week now, absolutely thrilled with it. Fits better than my wifes generic brand case, Screen protector is great, even after one failed attempt. Only gripes I have: Picks up any dust or lint or anything extremely easily. Grabs onto my jean pockets a bit too much, pulls them out a little bit. But those small complaints aside it's a great case and a great deal considering the screen protector is included.
bbv203 said:
Use a belt holster for the Samsung Moment.....same size as Hero with Otterbox
Click to expand...
Click to collapse
Where did you get the holster. I want to do this too.
http://www.seidio.com/index.html
i searched there website.....i dont see where they sell anything for the samsung moment, especially a belt holster??? because Im very interested in this as a well......
sorry to be a buzzkill but otterbox.com has the hero one for 34.95 but still, 10 bucks is a savings regardless!
OK, the Commuter case is out for some time now but the Defender case is pretty recent.
Who hase one and is willing to share there comments or even better want's to write a review?
Here is a review witch is posted in the commuter thread http://forum.xda-developers.com/showpost.php?p=6772033&postcount=46 Thanks Dunk001
I'm interested in ordering one, but since the price is a bit high i'd like to now more.
Picture of the HDII in the case and of the HDII next to the case would give a good impression of the total size increase.
ET said:
OK, the Commuter case is out for some time now but the Defender case is pretty recent.
Who hase one and is willing to share there comments or even better want's to write a review?
Here is a review witch is posted in the commuter thread http://forum.xda-developers.com/showpost.php?p=6772033&postcount=46 Thanks Dunk001
I'm interested in ordering one, but since the price is a bit high i'd like to now more.
Picture of the HDII in the case and of the HDII next to the case would give a good impression of the total size increase.
Click to expand...
Click to collapse
Hi ET.
Ive had the defender case for about 4 weeks now and all I can say is ITS WORTH EVERY PENNY!..seriously
The phone is so much more rigid and feels like It can withstand a real drop! The screen film on the case has tiny pores so you can use the screen just as effectivly as you would without the case.
The rubber parts of the case are VERY thick, approx 3mm thick which protects the corners from almost any bumps and scrapes.
On the back the speaker is protected with what can only be described as a rubber membrane which allows sound to pass through as loud as it would be without the case. The camera lense is protected by the same film as on the screen.
The lightsensors on the front are still exposed so the screen powerdown in a call is not affected.
The button protectors are built into the case so there are no gaps between the buttons which prevents dust from getting between the buttons.
The downside to the case is it does add a considerable amout of bulk to the HD2. But my HD2 cost me a pretty penny and I am in NO position to even think of breaking it Also if the phone crashes and you need to pop the battery out is a bit of a pain to get open esp when your in a hurry!
Any questions just PM me or leave a post on here.
Hope this helps you.
It's not that I can't affort the defender case but I choose my case very carefully, it has to meet my demands I have alway's been using Pielframa cases wich are pretty expensive.
Could you please post pictures;
1. of the HDII next to the case
2. of the actueal screenprotector(s)
The HDII without any case is perfectly flat for smooth opperating the touchscreen, no upstanding edges, in the Defender case I notice that there seems to be an upstanding edge, does this interfear with smooth swiping over the screen (like unlocking the lockscreen)?
I've been looking on the web for a video placing the HDII in the case b ut couldn't find anything.
here are some pics of what someone else has posted http://forum.xda-developers.com/showpost.php?p=7053061&postcount=88
I have this case and while it is a great case the raised edges oaround the screen do hinder the the swypeability somewhat, I use this case for when I am working or doing something more extreme, biking etc and for this it is excellent protection but i wouldnt use it everyday as I find it a little too restrictive for that use, I work with stone and so dust is everywhere all the time and for this it is the best for my purpose but maybe for everyday use the Commuter seems adequate, I will post some of my own pics when i get time as I can understand your questions on size etc...I would have like to have seen the same but in the end I just went for it. It even just fits with my bodyguardz protection still on which is a bonus!
In addition I would have to say what swung me from the commuter was the holster this is brilliant and a massive plus if you want to keep your phone to hand without fear of it getting crushed or broken
osrix said:
here are some pics of what someone else has posted http://forum.xda-developers.com/showpost.php?p=7053061&postcount=88
I have this case and while it is a great case the raised edges oaround the screen do hinder the the swypeability somewhat, I use this case for when I am working or doing something more extreme, biking etc and for this it is excellent protection but i wouldnt use it everyday as I find it a little too restrictive for that use, I work with stone and so dust is everywhere all the time and for this it is the best for my purpose but maybe for everyday use the Commuter seems adequate, I will post some of my own pics when i get time as I can understand your questions on size etc...I would have like to have seen the same but in the end I just went for it. It even just fits with my bodyguardz protection still on which is a bonus!
In addition I would have to say what swung me from the commuter was the holster this is brilliant and a massive plus if you want to keep your phone to hand without fear of it getting crushed or broken
Click to expand...
Click to collapse
Kindly post close-ups as I'm interested in comparing Defender vs Commuter. I think Commuter will suffice for my application.
Ok, I bit the bullit and ordered one this afternoon, it will arrive next monday I hope. If nobody is willing to post pictures then I will!
I'll keep you guy's posted.
Ok, case arrived this morning and boy what a case! It fits perfectly and is nice to hold in in your hand. It does make the HDII feel bigger and looking at it, it does but it just looks and feels perfect, some pictures;
Some more pictures;
The protective screen is attached within the font shell, kind of a dust magnet but cleaning it first in the bathroom would work good (less dust in bathroom). The front and rear shell click in to place and then the rubber protective casing fit's like a glove.
Received mine just this morning mate! and it makes my hd2 more superior regarding the size! ahaha! it looks like it's the king of htc phones! The screen protector that is attached in the front shell is perfect, because of the dust magnet effect of it. Plus the rubber case covers it all and also the protection for hardware buttons is excellent! Worth the money and time of waiting! Sorry can't post pics now(i'm @ my office..) ahah!
It is really recommended to have one of this, specially if you want a secure $$$ phone.
ET said:
Ok, case arrived this morning and boy what a case! It fits perfectly and is nice to hold in in your hand. It does make the HDII feel bigger and looking at it, it does but it just looks and feels perfect, some pictures;
Click to expand...
Click to collapse
BTW mate, where's the belt clip part of your case?
pongskie said:
BTW mate, where's the belt clip part of your case?
Click to expand...
Click to collapse
Belt clip and stylus holder are within the package, haven't maid picture of it as there are pictures on the Otter site. Put the beltclip en stylus holder on the case and you have the biggest phone around it looks more like a ruggidized laptop then........haha
ET said:
Belt clip and stylus holder are within the package, haven't maid picture of it as there are pictures on the Otter site. Put the beltclip en stylus holder on the case and you have the biggest phone around it looks more like a ruggidized laptop then........haha
Click to expand...
Click to collapse
ahaha! im just wondering, how will you place your phone on the belt clip? the screen facing the outside or facing the beltclip shell?
pongskie said:
ahaha! im just wondering, how will you place your phone on the belt clip? the screen facing the outside or facing the beltclip shell?
Click to expand...
Click to collapse
Screen facing outside, beltclip is also 360 degrees rotatable.
What type of texture does the Otterbox Defender have? Is it a smooth/slipper texture or more rubbery/rough/tacky texture? Is the exterior texture prone to attracting dust/dirt?
What is the best way to clean the screen on the defender? WOuld it be prone to scratches or damage/tear?
IS the Defender easy to take apart if one had to remove the battery to reset or change?
artofwar said:
What type of texture does the Otterbox Defender have? Is it a smooth/slipper texture or more rubbery/rough/tacky texture? Is the exterior texture prone to attracting dust/dirt?
What is the best way to clean the screen on the defender? WOuld it be prone to scratches or damage/tear?
IS the Defender easy to take apart if one had to remove the battery to reset or change?
Click to expand...
Click to collapse
rubbery/rough/tacky texture. not really a dust magnet, except for earpiece, it's not covered and become some kind of pit. search forum on how to clean the earpiece grid.
i just wash it. but i read somewhere "never wash it" because it got pores. it's plastic that look like it's prone to scratches, but apparently it's not quite. but if you carry it with your loose diamond in your pocket, i guess you can still scratch it.
took less than a minute the first few time, but you can do it blindfolded in few seconds after a while.
Everyone that's saw my phone on the defender case was amazed by it! this really is a must have case.. it is really worth it!
pongskie said:
Everyone that's saw my phone on the defender case was amazed by it! this really is a must have case.. it is really worth it!
Click to expand...
Click to collapse
Post some pics ?
Video would be better
Got the Defender and (as you may have noticed in my previous scribbles) am EXTREMELY satisfied - though I just ran into my first qualm with it. I overly tightened a screw connecting the stylus cradle and created a crack in the belt holster. Completely my fault but I still think it's worth mentioning here.
Recap: don't tighten the screws connecting the pen cradle with the belt holster too much. My ratchet snapped (so hard I consider myself lucky to have been wearing eyeglasses, as a metal cog flew high velocity towards my eyes upon the occurance) and my belt holster now has a crack going through it's topside all the way through the plastic (still feels sturdy, just not as reassuringally whole) adjuscent to the respective screw placement.
DuperMan
have just bought one of these, it is awesome, best case i have ever had for any phone.
ilordvader said:
Post some pics ?
Video would be better
Click to expand...
Click to collapse
Hi mate! the OP posted pics of his Defender Case. Well, it's just the same. The screen protector was attached on the front face plate. Everything was covered except for the part of the light sensors. You'll get along with removing the parts for sure! At first it would really take you a few minutes before you can remove your batt just to reset the phone.
I came from a moto Droid X and X2 these phones were very well protected in the trident kraken and electra cases i owned over the life of those 2 phones. Everything ive seen for this beauty has been "ultra slim" or something similar offering almost no real protection. The knockoff griffin survivor seems to be the only semi rugged case ive been able to dig up, am i really the only one that wants more protection than just a backplate? I don't have small hands or wear skinny jeans, and honestly I would prefer it to add some weight and size.
The only upcoming thing that gives me hope is the possibility of the rugged zerolemon case next month. Had anyone found something out there that i missed? I need topend protection for my $700 phone and i cant find it
gNOTE2 rolling in the north
there are otterbox cases, uag cases and many more. there is a whole thread on cases. ebay is literally infested with cases for this phone.
Otterbox defender is about as rugged , heavy and bulky as it gets. I own one myself but cant stand how much more bulkier the phone is, I much prefer just the extra weight of the zerolemon battery and its stock tpu case. Hoping the rugged version ZL case doesnt add too much bulk and has a nice kickstand.
Sent from my SPH-L900 using xda premium
d12unk13astard said:
Otterbox defender is about as rugged , heavy and bulky as it gets. I own one myself but cant stand how much more bulkier the phone is, I much prefer just the extra weight of the zerolemon battery and its stock tpu case. Hoping the rugged version ZL case doesnt add too much bulk and has a nice kickstand.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
If they put a kickstand on it, I will not only throw up but I'll throw up and curse YOU at the same time sir!
:laugh:
Otterbox uag dba casemate all make non rugged crap that lays in a pile on my desk. You cant call it protection if all you have on the front is a 1/10 inch or less raised around the edges... This is not protection and yes ebay is infested with 3 dollar cases that are flimsy and protect almost nothing.
I am asking about actual rugged cases like the knockoff griffen survivor or some "military" rugged style.
gNOTE2 rolling in the north
LordRalh3 said:
Otterbox uag dba casemate all make non rugged crap that lays in a pile on my desk. You cant call it protection if all you have on the front is a 1/10 inch or less raised around the edges... This is not protection and yes ebay is infested with 3 dollar cases that are flimsy and protect almost nothing.
I am asking about actual rugged cases like the knockoff griffen survivor or some "military" rugged style.
gNOTE2 rolling in the north
Click to expand...
Click to collapse
Since you mentioned the Survivor knock off, the Otterbox defender offers essentially the same level of protection. Your best bet at this stage is probably the heaviest Sedio case along with a tempered glass screen protector. Not optimal, but that's about as rugged as it gets.
I enjoyed my ballistics case before my ZL came in. Protected my phone from many countertop falls. I hoping the new ZL cases will be better than the ones that came with the battery.
Sent from my SPH-L900 using Tapatalk 4 Beta
apallohadas said:
if they put a kickstand on it, i will not only throw up but i'll throw up and curse you at the same time sir!
:laugh:
Click to expand...
Click to collapse
if you like it put a ring on it
apallohadas said:
If they put a kickstand on it, I will not only throw up but I'll throw up and curse YOU at the same time sir!
:laugh:
Click to expand...
Click to collapse
I'll bet you will throw up, curse, and piss your pants if they built additional battery into a kickstand Maybe I should email them with an idea lol!!!
Dammit, they still didn't reply back to me about rugged case preliminary pictures
---------- Post added at 10:43 PM ---------- Previous post was at 10:36 PM ----------
drnihili said:
Since you mentioned the Survivor knock off, the Otterbox defender offers essentially the same level of protection. Your best bet at this stage is probably the heaviest Sedio case along with a tempered glass screen protector. Not optimal, but that's about as rugged as it gets.
Click to expand...
Click to collapse
I second that! Seidio CONVERT with VITREO tempered glass - a very rugged solution!!! I personally find UAG with VITREO optimal for me whenever I carry a stock battery; and with addition of CONVERT holster with stick-on card/money holder which fit UAG like a glove - that my ultimate solution for the summer (especially with mesh shorts).
But I'm looking forward to ZL rugged case, and really hope it's not going to be like that honecomb tpu junk you find for extended batteries. Keeping my hopes high ZL guys will come up with something cool!
Thanks for the Sedio tip, they only had the active and surface when I was looking the last few times, that with a glass screen protector (and maybe another normal one on top of that) and i should be good to go.
.. If the ZL rugged isnt what it should be this will most likely be what I get next
gNOTE2 rolling in the north
LordRalh3 said:
Thanks for the Sedio tip, they only had the active and surface when I was looking the last few times, that with a glass screen protector (and maybe another normal one on top of that) and i should be good to go.
.. If the ZL rugged isnt what it should be this will most likely be what I get next
gNOTE2 rolling in the north
Click to expand...
Click to collapse
You REALLY don't need another screen protector on top of the tempered glass.
LordRalh3 said:
Otterbox uag dba casemate all make non rugged crap that lays in a pile on my desk. You cant call it protection if all you have on the front is a 1/10 inch or less raised around the edges... This is not protection and yes ebay is infested with 3 dollar cases that are flimsy and protect almost nothing.
I am asking about actual rugged cases like the knockoff griffen survivor or some "military" rugged style.
gNOTE2 rolling in the north
Click to expand...
Click to collapse
Just broke the clip on my Second otterbox belt holster .. same failure as the first . AT&T did warranty the first , we will see if they will the second next time i am upstate . Also its a constant battle taking the case apart to clean the fine dust that filters under the screen protector .
I dont see how your belt clip broke. I had a ***** of a time trying to remove it on purpose.
apallohadas said:
You REALLY don't need another screen protector on top of the tempered glass.
Click to expand...
Click to collapse
If you really need a rugged case you do. I broke my first note from a 12 foot drop in a otter box defender because I didn't have a screen protector on at the time.
TheBDub said:
If you really need a rugged case you do. I broke my first note from a 12 foot drop in a otter box defender because I didn't have a screen protector on at the time.
Click to expand...
Click to collapse
At 12 feet, you may want to consider bubble-wrapping that baby!
TheBDub said:
If you really need a rugged case you do. I broke my first note from a 12 foot drop in a otter box defender because I didn't have a screen protector on at the time.
Click to expand...
Click to collapse
Anything over about 6 feet is really a matter of luck. I dropped my Fascinate more than 20 feet down a granite face followed by 6 feet of free fall an landing on a granite boulder. It was in a decent case (Seido Active) but there was a whole lot of luck involved in its survival too. Not a scratch on it. It sounds like you weren't as lucky. But it's very unlikely that a screen protector would have made a difference. Film screen protectors won't protect against breakage, just scratches. For falls, the tempered glass will give more protection. It would be nice to have a fully ruggedized military grade case for the Note2, but they just don't exist.
If drops are your main concern, I would carry the phone in the Hsini pouch with either the Survivor or the Seidio Convert as a case. Then add a tempered screen protector. After that, it's a matter of luck. If you drop your phone from three feet and it lands screen first on the sharp point of a piece of hard ceramic, it just doesn't matter what kind of case it has.
Yeah, I learned not to have my phone out while putting up Christmas lights...
Sent from my SCH-I605 using Tapatalk 4 Beta
UAG is serving me well i have dropped mine many times from bout 4 ft and had no problems and its not very bulky
Honestly the defender is junk. It has really ruined my bezel with scratch marks all over it. Had to pop out the included screen protector because it didn't even come close to laying flat on the screen and caused dust to find it's way under the screen resulting in a sand paper effect happening under the protector. Sold mine on craigslist.
I work in construction and really need the ports covered so that limits most every other case. I agree, really isn't much on the market that offers protection I honestly think I could have faith in. Will go look at the few mentioned here and hope something better comes along.
GriffIn Fakes
I got the griffin fake because I wanted something really heavy duty, I like the look and they were really cheap.
I would recommend it to anyone. I did have a few issues:
1. The screen protector is crap, but you can remove it and find a nicer one of leave it off.
2. The hole around the sensor was too small so when you took the phone away from your face during a call it would not wake up, used a pocket knife and spun in in the hole a few times and it works great now.
3. The flap that covers the camera does stay put so you have to hold it while taking a pic or remove it (I removed it)
for all the issues I asked for a credit and my final price was 6 bucks
Hello. I am looking for full body case for S7 EDGE. On my iphone 6 I'm using this case:
http://www.ebay.co.uk/itm/iPhone-6-...215370?hash=item1ead0b434a:g:LeIAAOSwu1VW5rU1
Which gives me dust and shock protection. Also is cheap. Do You know similar case for s7 edge?
Since your link was for the UK eBay, I'm linking an Amazon UK
Supcase S7 Edge Full Case
Enjoy!
I've used Unicorn Beetle cases on my last 3 phones and won't use anything else now
https://www.amazon.co.uk/Samsung-Re...139723&sr=8-1&keywords=s7+edge+unicorn+beetle
Survived 3 drops now including a face down on a stone covered carpark
jester350 said:
I've used Unicorn Beetle cases on my last 3 phones and won't use anything else now
https://www.amazon.co.uk/Samsung-Re...139723&sr=8-1&keywords=s7+edge+unicorn+beetle
Survived 3 drops now including a face down on a stone covered carpark
Click to expand...
Click to collapse
Is there screen shield on the front panel?
How about Otterbox Defender?
I am looking for case with front panel shield, not back only.
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty Ordered it & awaiting its arrival.
S3MyLove said:
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty Ordered it & awaiting its arrival.
Click to expand...
Click to collapse
Woow looks very good, but a bit expensive
troxter said:
Woow looks very good, but a bit expensive
Click to expand...
Click to collapse
Looks good?
I'm sure it's very effective though.
troxter said:
Is there screen shield on the front panel?
Click to expand...
Click to collapse
nope you'll need to buy that separately if you want one
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.