Whats the best way you have found to prevent pocket dialing? Ive turned ambient display off and have to use a patern to unlock now. It the only way Ive been able to stop it. It works but I dont like not being able to use ambient display and I also dont like how long it take to open the phone with the pattern.
Any ideas?
Vindii said:
Whats the best way you have found to prevent pocket dialing? Ive turned ambient display off and have to use a patern to unlock now. It the only way Ive been able to stop it. It works but I dont like not being able to use ambient display and I also dont like how long it take to open the phone with the pattern.
Any ideas?
Click to expand...
Click to collapse
Well, other than the obvious, don't put it in your pocket pattern, pin, password is the answer. Ambient display can be turned back on with a screen lock set. Or set screen lock to swipe. That might be a help. Or possibly a flip case.
Enable the Smart Lock feature under Settings->Security. Then set up a trusted Bluetooth device (wearable, etc.) paired with the phone to bypass the screen lock when in range. I use a Motorola Keylink on the key chain in my pocket.
Then, before putting the phone in your pocket, touch the Power button to turn off the screen. To turn it on again, while connected to your trusted Smart Lock device, you merely have to swipe the screen after touching the Power key.
even with a pin on my phone i sometimes pocket dial... only happened like 2 or 3 times in the 4 months ive had the phone. somehow it pulled up the emergency dialer.
dansan382 said:
even with a pin on my phone i sometimes pocket dial... only happened like 2 or 3 times in the 4 months ive had the phone. somehow it pulled up the emergency dialer.
Click to expand...
Click to collapse
I never add emergency contacts because this kept happening. No emergency contacts + some kind of lock is the best solution. I just write an emergency phone number to contact in the "Owner Info" in settings, so an emergency phone number shows up on the lock screen in case I ever lose my phone, and someone finds it and plans to return it.
vikramjatt11 said:
I never add emergency contacts because this kept happening. No emergency contacts + some kind of lock is the best solution. I just write an emergency phone number to contact in the "Owner Info" in settings, so an emergency phone number shows up on the lock screen in case I ever lose my phone, and someone finds it and plans to return it.
Click to expand...
Click to collapse
i dont have emergency contacts either. what im saying is on my lock screen it brings up the dial pad and half the time its selected the emergency dialer at the bottom of the pin screen.
dansan382 said:
i dont have emergency contacts either. what im saying is on my lock screen it brings up the dial pad and half the time its selected the emergency dialer at the bottom of the pin screen.
Click to expand...
Click to collapse
I'm guessing you have a pattern as your unlock method, so the emergency dialer is always at the bottom as soon as the screen turns on.
Try changing it to a PIN, so you have swipe up first, and then the emergency dialer/PIN screen come up.
vikramjatt11 said:
I'm guessing you have a pattern as your unlock method, so the emergency dialer is always at the bottom as soon as the screen turns on.
Try changing it to a PIN, so you have swipe up first, and then the emergency dialer/PIN screen come up.
Click to expand...
Click to collapse
no like i said i have a pin as my lock screen challenge. somehow the phone manages to swipe up the dialer or the unlock button and then pulls up the emergency dialer and start tapping numbers.
Same issue here, whether i have pattern or pin its still managed to unlock phone and pocket dial from the emergency dialler. I did have my pebble watch in smart unlock, this did all manner of things from video call the missus to change settings and force me to restore rom as i couldnt work out the issues.
I have a flip case that i really do not want to use as phone is big enough, ambient display on or off it still does it!
Related
Is it possible to tell the Diamond to stay locked with the screen off until unlocked manually while a handsfree is connected? I keep my phone in my pocket while driving and it unlocks itself when a call is in progress and then locks itself again, when the call finishes. But if anything is pressed, and it does if I even move a centimetre, it won't lock back again and will in most cases call back the person I've just had a conversation with.
Is there a setting I'm missing or would an application have to be used?
IceBone said:
Is it possible to tell the Diamond to stay locked with the screen off until unlocked manually while a handsfree is connected? I keep my phone in my pocket while driving and it unlocks itself when a call is in progress and then locks itself again, when the call finishes. But if anything is pressed, and it does if I even move a centimetre, it won't lock back again and will in most cases call back the person I've just had a conversation with.
Is there a setting I'm missing or would an application have to be used?
Click to expand...
Click to collapse
Use TouchLockPro
I have the same need and tried plenty of solutions, no good so far.
One of them was actually an early version of TouchLockPro, however it lacked an important functionality of treating locking as a mode. It has a "lock on incoming call" feature, but that's not what I need because most of the time my phone is on the desk and shouldn't lock on every incoming call. What I need (and I guess IceBone is with me on that) is just a way to make sure that when the phone is locked - it just stays this way till instructed otherwise...
erezshermer said:
I have the same need and tried plenty of solutions, no good so far.
One of them was actually an early version of TouchLockPro, however it lacked an important functionality of treating locking as a mode. It has a "lock on incoming call" feature, but that's not what I need because most of the time my phone is on the desk and shouldn't lock on every incoming call. What I need (and I guess IceBone is with me on that) is just a way to make sure that when the phone is locked - it just stays this way till instructed otherwise...
Click to expand...
Click to collapse
TouchLockPro can be tuned to your needs, just disable autolockonpoweron and you are in control...
I will check it out.
EDIT: Sorry, but that's completely useless to me. There's a thousand other options that I had to disable, it didn't unlock itself with the power button, it also didn't stay locked on incoming call, even though I double checked I had that enabled, it also puts an annoying white square in the windows status bar, which covers the clock.
All I want is for the phone to stay locked on incoming and outgoing calls. If it can be set to only stay locked only while a handsfree set is connected (the phone does know the difference, it shows a nice little headset icon), it would be perfect.
This is the biggest issue with my TD...
Because of this issue BT headset is totaly useless (if device in your pocket or case).. After incoming or outgoing call need to check device for unwanted actions..
Well, if we get more people requesting this, maybe one of the devs could cook up a quick fix.
IceBone said:
I will check it out.
EDIT: Sorry, but that's completely useless to me. There's a thousand other options that I had to disable, it didn't unlock itself with the power button, it also didn't stay locked on incoming call, even though I double checked I had that enabled, it also puts an annoying white square in the windows status bar, which covers the clock.
All I want is for the phone to stay locked on incoming and outgoing calls. If it can be set to only stay locked only while a handsfree set is connected (the phone does know the difference, it shows a nice little headset icon), it would be perfect.
Click to expand...
Click to collapse
The white square is the inidcator that it is locked. The configured foreground and background color are reversed when locked.
I will put a convenience setting (Bluetooth) in the action screen on the wish list, so it will never unlock/lock when that mode is activated by te other unlocking methods. But there must also be way to unlock then. Maybe the Stylus still unlocks, so you can disable Bluetooth mode?
Reason4444 said:
This is the biggest issue with my TD...
Because of this issue BT headset is totaly useless (if device in your pocket or case).. After incoming or outgoing call need to check device for unwanted actions..
Click to expand...
Click to collapse
I will add this to the next version of TouchLockPro, a way to enable/disable bluetooth lock mode
Could you possibly release a cab that does only that? It would be perfect, it's the only functionality I want.
IceBone said:
Could you possibly release a cab that does only that? It would be perfect, it's the only functionality I want.
Click to expand...
Click to collapse
You can use StylusLock, which makes it possible to lock/unlock only using the stylus sensor. This can be used in combination with Bluetooth.
Also TouchLockPro can be used in combination with Bluetooth, but then you need to change more settings, but this is easy too, via the TouchLockAction settings screens:
- Light Sensor: Uncheck "Use Light Sensor"
- G Sensor: Uncheck "Use G Sensor"
- Nav Sensor: Uncheck "Use Capacitive Nav Sensor"
- TAPI: Uncheck "Use TAPI"
- Other Settings: Uncheck "AutoLockOnPowerOn"
Thereafter you can lock the phone by taking the Stylus Out and putting back in within 1 second and use Bluetooth for picking up the phone. If you take out the Stylus, it will also unlock.
But I would still have to take the stylus out if someone called and I wasn't connected to the bluetooth. Or is only the screen locked?
IceBone said:
But I would still have to take the stylus out if someone called and I wasn't connected to the bluetooth. Or is only the screen locked?
Click to expand...
Click to collapse
With the settings I gave, you are in control of locking. So if you did not lock the phone via the Stylus Out/In, it will not be locked, also when a call comes in or you power on (or external event) the phone.
From your response, I understood you only wanted locking with Bluetooth:
IceBone said:
Could you possibly release a cab that does only that? It would be perfect, it's the only functionality I want.
Click to expand...
Click to collapse
But of course, you can also use the capacitive touch area for unlocking and configure power on also as a locking means.
Other Settings: Check "AutoLockOnPowerOn"
Nav Sensor: Check "Use Capacitive Nav Sensor"
In the Nav Sensor screen you can fine tune your capacitive unlocking methods.....
Yes, the only thing I want is for it to stay locked until I unlock it manually when BT is connected.
IceBone said:
Yes, the only thing I want is for it to stay locked until I unlock it manually when BT is connected.
Click to expand...
Click to collapse
Ok, so the settings I gave you will do that.
But will those settings be disabled when bt is disconnected and the phone will unlock on an incoming call?
IceBone said:
But will those settings be disabled when bt is disconnected and the phone will unlock on an incoming call?
Click to expand...
Click to collapse
With the settings I gave, you are in control of locking. So if you did not lock the phone via the Stylus Out/In, it will not be locked, also when a call comes in or you power on (or external event) the phone.
The only thing you need to do, is lock it manually via the Stylus Out/In, when you want it locked (e.g. when using bluetooth).
Hmm i have the same problem , this sound very interesting. I did tried everything too. Nothing yet. The only solution is that "ZuinigeRijder" will find a fix or an addon. That would be really helpfull !!
ZuinigeRijder said:
With the settings I gave, you are in control of locking. So if you did not lock the phone via the Stylus Out/In, it will not be locked, also when a call comes in or you power on (or external event) the phone.
The only thing you need to do, is lock it manually via the Stylus Out/In, when you want it locked (e.g. when using bluetooth).
Click to expand...
Click to collapse
It would still require me to fiddle with it when I connect or disconnect. I've been thinking and the light sensor could also be used, lock the screen/keys permanently when in the dark (pocket) and switch to normal when out. I suspect your program can do that as well, but it's just too fiddly with all the other unneeded options. Can't you delete a few lines and make just a simple locker like that? Wouldn't even need to have a status icon like it does now.
Just got the diamond2 and am loving it. Came from the touch pro. Problem is I have been pocket dialing while its in my leather case. This is not good, as I am a real estate salesperson and it is calling some important people. Does anyone have a solution? BTW, I was using touch lock pro on the touch pro.
Thanks!
hi lorettaboy
you should lock the kets by holding the end call button for a few seconds and that should sort your problem out
I forget what it's called but there is this locking software that will completely lock the phone if you rotate it around the long axis one way and unlock if you do the same the other way.
I have been using throttle lock though. It is like the Android unlock screen where you draw patterns.
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Kinto said:
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Click to expand...
Click to collapse
I think what may be happening is that the power button is being pressed while in the case unlocking the phone and keys. I had this happen before and still does sometimes when in my pocket.
4 characters: S2U2
Hoping wm6.5 features a lock that's as functional as S2U2.
I personally use http://pocketshield.netserver01.com/ It locks your phone when its closed, and you have different ways to 'wake' it. the 3 that I set it currently is:
1. if the phone is in the case (aka dark) it will not unlock even if phone is ringing, but once you remove it from the sleeve/pouch it will be unlocked.
2. If its night time and the above prevents you from unlocking in the night, shaking phone left to right once will unlock it
3. lastly if I take out stylus it will unlock.
lorettaboy said:
I was using touch lock pro on the touch pro.
Click to expand...
Click to collapse
Googled it, light sensor lock sounded interesting, tested it. Never got the light sensor unlock to work. Had to keep tapping the lock button for a varying number of times to unlock. But worse: got catch-22-ed twice within ten minutes.
The first time I got caught with the screen on, the 'turn off' dialog active, and Touch lock Pro active but not clickable because of the turn off dialog. No way to unlock the device and the power button was hijacked by Touch Lock Pro. Removed back cover, took out battery and restarted.
The second time the device locked with the screen off, and the power button couldn't turn the screen on again. No way to find out what happened this time. Removed back cover, took out battery and restarted.
This tool is possibly the least compatible tool with the TD2 you will ever find
Guys I have a serious problem w my P10 Lite. I'm using the fingerprint scanner for locking/unlocking my device and it has been great or those few days that I have the phone, but there is a problem. It happend to me twice now: I'm taking out my phone from my pocket and I'm unable to unlock the phone due to "to many attemps of unlocking the phone" and I have wait 10 minutes (seriously?!) to try again...I dont get it, how is it possible ? My thigh skin "attepms" to unlock my phone thorough my trousers?
How can I at least disable this "to many attemps" feature?
I face this problem before and this is my highly suspected findings, correct me if I am wrong.
You must have turned on the "notifications turn on screen" under settings -> notification & status bar. Therefore, when there is a new notification came in, your screen is on while the phone is in your pocket. The finger print scanner is activated. While you were walking, the phone (finger print scanner) was rubbing the clothes and it thought you are attempting to scan a "finger print" but of course not, that's why it was an "attempt" and failed. After don't know failed for how many times, it will only allow you to unlock again after 10 mins.
What I do now is, i turn off the "notifications turn on screen" feature. If you still want this feature turned on, when you put the phone in your pocket, maybe let the screen face out, not facing your leg. Maybe another way is to use a flip cover? As long as don't let the finger print scanner touches any where while the screen is turned on by new notifications.
ok, this is wierd, I do not see this setting anywhere. but when I type it in the search bar it shows up under "notification & status bar"
This easy access emergency call feature on LOCK SCREEN is so annoying. My 2 and half years old is able to figure out how to dial 911 because LG make it so easy to dial by just selecting it instead of entering the number. I've tried a couple 3rd party lock screens, they would do the trick but not able to use the finger print to unlock.
Always on feature won't help either, he can get to regular lock screen by pressing the power button.
I wan't able to persuade him not to play around with my phone at this moment. I might get into trouble if he keep doing this.
Since i am staying home 24/7 with him there is always a moment he has his hand on my phone without me noticing it.
I am currently using AT&T G8 with android 10. Can I root it and remove 911 or change it to other number?
is there any ADB command would do the trick?
I often find that my phone is unlocked or pocket dialed in my pocket, occasionally feeling a little vibration when I guess it is trying to unlock.
I unlock with fingerprint usually. My trouser pockets clearly don't have my fingerprints pressing against the sensor.
I've turned on the "pocket mode" option in advanced settings but it still does it.
Is there any way I can fix this? I am not rooted and have locked bootloader.
Thanks
batjon said:
I often find that my phone is unlocked or pocket dialed in my pocket, occasionally feeling a little vibration when I guess it is trying to unlock.
I unlock with fingerprint usually. My trouser pockets clearly don't have my fingerprints pressing against the sensor.
I've turned on the "pocket mode" option in advanced settings but it still does it.
Is there any way I can fix this? I am not rooted and have locked bootloader.
Thanks
Click to expand...
Click to collapse
I have the same problem
Dave.a said:
I have the same problem
Click to expand...
Click to collapse
At least they are consistent
I'm using Pocket Lock from Play Store, I set it to lock my phone when it's upside down and the screen is getting turned on.
It's not perfect, but solves the above problem which annoyed me as well as you.
Edit: I've turned off the phone's own pocket mode, Pocket Lock alone is sufficient enough.
batjon said:
I often find that my phone is unlocked or pocket dialed in my pocket, occasionally feeling a little vibration when I guess it is trying to unlock.
I unlock with fingerprint usually. My trouser pockets clearly don't have my fingerprints pressing against the sensor.
I've turned on the "pocket mode" option in advanced settings but it still does it.
Is there any way I can fix this? I am not rooted and have locked bootloader.
Thanks
Click to expand...
Click to collapse
Big problem also for me, I've made like a thousand call or multiple WhatsApp forward...
I solved turning off face unlock. Just using the fingerprint or sequence
The most confusing thing here is how on earth does the phone accept the unlock while in pocket? When using my finger it rejects it often enough.. in my pocket my thigh has a higher success rate? I doubt it randomly would draw the right pattern so often.
So all a thief would have to do is put the phone in their pocket and it unlocks eventually!
Use a case/care when placing in pocket and place the back the phone against your skin, not the display.
What's really disturbing is when you find it has opened setup pages you don't even recognize
Has anybody tried Pocket Lock? ASUS' built-in pocket mode is very buggy, it would be more than enough to check the gyroscope if the phone is in mostly vertical position (upside down or vice versa), and when the proximity sensor shows almost 0 distance to something, the screen should stay off and the phone locked. That's what Pocket Lock provides a working solution for - I'm not the developer, so I'm not advertising it, but as somebody who had the same problem as you have in this subtopic, I bought the pro version and the "ghost unlocking" is now gone.
5tormChild said:
Has anybody tried Pocket Lock? ASUS' built-in pocket mode is very buggy, it would be more than enough to check the gyroscope if the phone is in mostly vertical position (upside down or vice versa), and when the proximity sensor shows almost 0 distance to something, the screen should stay off and the phone locked. That's what Pocket Lock provides a working solution for - I'm not the developer, so I'm not advertising it, but as somebody who had the same problem as you have in this subtopic, I bought the pro version and the "ghost unlocking" is now gone.
Click to expand...
Click to collapse
Thanks. And also to the previous poster about this app.
Once installed do you lose access to fingerprint unlock etc?
batjon said:
Thanks. And also to the previous poster about this app.
Once installed do you lose access to fingerprint unlock etc?
Click to expand...
Click to collapse
There's an alternative locking method to keep fingerprint unlocking, but seemingly it doesn't work under A12 - still, you can keep using the fingerprint reader until Pocket Lock has locked your device, which is better than call anybody from your pocket.
BTW, your pocket won't unlock your phone as stated in one of the previous posts, but an incoming call will turn your screen on, and if you're unlucky, on the virtual dial pad your pocket will enter numbers.