Database Develop

[Q] Aroma installer stuck

Hello,
I am a noob trying to install a rom with aroma installer. But now it has been stuck at the page where it says: The installation wizard has successfully installed *********. Press next to exit.
What do i do? Power off?

Is it definitely stuck? Aroma doesn't always recognise touch events very accurately, and I usually have to tap the "next" button a few times before it registers. Failing that, if it's finished installing whatever you flashed, you should be fine to reboot manually anyway.

Yes,i have tried to push the next button many times but nothing happens. It has been like this for 30 minutes now. The successfully installed text appeared very fast, a second or two maybe after the previous screen. So if it has installed the rom, it was def a fast install.
Anyway, is it safe to try to reboot, even if it was in the middle of the install? Rebot to recovery and try again?

Well, there certainly isn't anything else to be done besides rebooting. I don't know what you were trying to install - if it was a several-hundred-MB ROM, as most things that use Aroma are, you would expect it to take a while. Smaller things can be flashed very quickly. If it _did_ go wrong somewhere, there are a few things:
1. What recovery, and what version thereof, are you using?
2. Did you wipe data before using the installer?
3. Most of all, what were you trying to install? There might be some known issue with certain configurations.
I wouldn't necessarily expect a working OS when you reboot, depending on what you were trying to install and how badly things went wrong, but you should be able to get back into recovery easily enough.

Thank you for your quick reply.
1. I use the CWM recovery in this http://forum.xda-developers.com/showthread.php?t=1914394 thread, not the newest, but 5.5 something i believe.
2. Yes, wiped all data + dalvik.
3. I was trying to install rXTREME on my SGS III lte i9305.
I've rebooted now, and everything works perfect as the phone was before i tried to do the install. No brick. I also tried to flash it one more time, but stuck at the same place again. Rebooted fine at stock rom again. Maybe i should take this as a hint that someone else should be put at the steering wheel.. :laugh:
EDIT: forgot link above

Found out what the problem was.
In Aroma Installer i selected EFS backup both times. The third time i tried i did not do this. And everything went fine. Runs smooth.

my galaxy s3 international version got stuck at 30% of formatting\data partition while trying to flash s4 revolution 4.1 rom
what should i do?

jehad.drarjeh said:
my galaxy s3 international version got stuck at 30% of formatting\data partition while trying to flash s4 revolution 4.1 rom
what should i do?
Click to expand...
Click to collapse
This is I9305 forum is this your phone ??
This thread is about Aroma installer is that your problem ???
Suggest you read the basic faqs and guides first looks like from your post you are either flashing wrong rom to your phone or have hijacked a thread in the wrong forum ./
jje

[Q] HTC One in BootLoop.

I believe my device is in a Boot Loop. Earlier this morning I installed ARHD, it went into the AROMA Installer and went through the process of picking the mods that I wanted, I hit install & as soon as it hit 99 Percent, I was brought back to TWRP as if I didn't flash anything. Feeling confused, I hit reboot system and after the HTC Screen boots up, it takes me directly back to TWRP. I've never experienced anything like this before, what in the world did I do incorrectly? Please help me get back to stock, I've used @hasoon2000 's All in One Kit to ADB sideload the stock ROM but it doesn't seem to want to work? Any others suggestion on what I should do?

Please i need help, after flashing xposed framework, i cant booting my S5.

Hey everybody,
i hope so much, that anyone can help me. After i installed the recovery TeamWin (TWRP) (it was successful), i tried to flash Xposed Framework manually, i got again an massage "it was successful". But after that i can not start my Samsung Galaxy S5. It shows me only the Samsung Logo and nothing happened. Of course i tried via TeamWin an factory reset but i still can not boot my smartphone (Stop at the Samsung Logo). My S5 ist rooted, i`m using 5.0 (lollipop). Version of the TeamWin was 2.8.7.0 and of the Xposed Framework "xposed-v74-sdk21-arm". Has anybody an idea? I would be very happy. Should i delete the TeamWin recovery? But how? I want to install the standard recovery of Samsung, but how to do this? Where can i find the original Recovery from Samsung?

Xposed isn't supported on latest Android versions (r23). You should just remove Xposed from your phone, by using this tutorial:
Code:
http://forum.xda-developers.com/xposed/xposed-lollipop-stuck-bootloop-t3055816

Deadclysm said:
Xposed isn't supported on latest Android versions (r23). You should just remove Xposed from your phone, by using this tutorial:
Code:
http://forum.xda-developers.com/xposed/xposed-lollipop-stuck-bootloop-t3055816
Click to expand...
Click to collapse
Thank you, but i cant find the xposed folder...because i made a factory reset

Just delete the files and folders that you can see (those which are Xposed related). It should fix your problem.
Or just flash ovet your rom again (dirty, without wiping).
Sorry it took long time for me to answer.
Edit:
Read sticky, there's a script that uninstalls it automatically. This should work 100%

always make nandroid backup before flashing

Having the same problems
So I'm having the same problem. The Framework says it installs correctly, but after reboot, device gets stuck at the Samsung screen. I don't understand the comment android r23. I'm looking at the build info and I don't see this anywhere. Some explanation or assistance would be great.

I'm not sure why sdk 23 was even mentioned as Lolliopo 5.0 is sdk 21.
@LieberKerl, you got the xposed-v74-sdk21-arm.zip from Rovo89's thread, correct? If so this will not work on stock Samsung Touchwiz ROMs as mentioned in the first post of that thread.
There is no Xposed that will work on a stock Samsung Touchwiz ROM, it must be deodexed first and if you have a deodexed ROM, you need arter97's unofficial Xposed from this thread: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463.
If you don't know what deodexed is, there's a bit of reading ahead of you. If you don't want to deodex your Lollipop 5.0 ROM, then you're out of luck.

It takes longer to boot after the install, how long did you leave the samsung boot logo up? it took nearly 15 mins to boot after rom install and around 5 mins after xposed framework. I went through alot of hassle just to discover i was impatient.

Reflash stock ROM with Odin.

after flashing in my unite 3 notification bar disappeared and phone is restarting again and again

Nerotech11 said:
It takes longer to boot after the install, how long did you leave the samsung boot logo up? it took nearly 15 mins to boot after rom install and around 5 mins after xposed framework. I went through alot of hassle just to discover i was impatient.
Click to expand...
Click to collapse
Happened to me too on an Oukitel C4. After flasing it needs quite some time to boot.

Cannot Install Xposed in Samsung Galaxy S6
I have the same issue with a Samsung Galaxy S6. I tried installing "xposed-v87-sdk23-arm64.zip" using TWRP. But Every time I do it the phone either goes completely black or shows the Samsung Logo flickering permanently. To fix this I need to go into TWRP again and install "xposed-uninstaller-20160829-arm64.zip". I tried leaving the phone with the black screen/logo flickering for over 1 hour hoping it might be installing something but the only way to turn the phone back on is with the uninstaller.
I thought that it might be due to not having OEM unlock enabled, but I cannot find the option in "developer tools". Then I tried to do it through ADB command lines but when I enter the command "fastboot-windows oem unlock " it gets stuck with the message "waiting for device". So I also tried installing PdaNet both on my windows 7 PC and the phone itself (Android 6.0.1) and I made sure I have the phone drivers installed on my PC.
All I want is to use Xposed modules on my Galaxy S6. Is it even possible? If so, what should I do?
I appreciate any suggestions.
Thank you.

InfiniteSegovia said:
I have the same issue with a Samsung Galaxy S6. I tried installing "xposed-v87-sdk23-arm64.zip" using TWRP. But Every time I do it the phone either goes completely black or shows the Samsung Logo flickering permanently. To fix this I need to go into TWRP again and install "xposed-uninstaller-20160829-arm64.zip". I tried leaving the phone with the black screen/logo flickering for over 1 hour hoping it might be installing something but the only way to turn the phone back on is with the uninstaller.
I thought that it might be due to not having OEM unlock enabled, but I cannot find the option in "developer tools". Then I tried to do it through ADB command lines but when I enter the command "fastboot-windows oem unlock " it gets stuck with the message "waiting for device". So I also tried installing PdaNet both on my windows 7 PC and the phone itself (Android 6.0.1) and I made sure I have the phone drivers installed on my PC.
All I want is to use Xposed modules on my Galaxy S6. Is it even possible? If so, what should I do?
I appreciate any suggestions.
Thank you.
Click to expand...
Click to collapse
Most likely your issue is caused because you did not install the correct framework version. You need the one from wanam. Just search for "Xposed Samsung wanam" and you'll find your answer.

S3 i8190l stuck in loop after flashing CM12.1

Hey everyone,
I'm having a problem after trying to flash CM12.1 on a i8190l.
The instructions I basically followed are the ones mentioned here: novafusion.pl/tutorials/installation-guide-golden/ and I used the rom Lollipop 5.0.2 (CyanogenMod 12.0) 20150428 stable with the Odin app to install it.
All went well up to the point 12. Click on Wipe, then use slider on the bottom to let process begin.
At this point I received a FAILED message with an error message saying below that /data couldn't be mounted. After that, I rebooted the phone, and it started loading the first android screen apparently. After a few minutes, Android threw up an error saying that it couldn't encrypt the data and had to reboot. After that reboot, the system won't stop going over a loop boot that flashes TeamWin over and over again.
I can still get to the download mode, what is the recommended step to take from here? Is it possible to recover the OS? Do I have to worry about the battery running out, or does it charge up while on download mode/other mode?
Thanks for your help

Phone wont start after installing xposed framework.

Hello,
I installed xposed framework on my galaxy s6 tmobile on 6.0.1 marshmallow. I installed it through twrp and after i rebooted the phone wont boot up. The screen is black, but the blue led in the top left corner stays lit. I cant boot into twrp but i can put it in download mode. I also cant turn it off. I watched a video about installing xposed and the guy said that it can take up to 20 minutes to boot the first time after installing xposed. I installed it around 40 minutes ago and it still has not booted up. Does the phone just need more time, or have i bricked my phone? If it is bricked would i be able to put it in download mode and flash stock through odin? Thanks in advance.
update: After some time the phone screen turned on and it is now stuck at the tmobile boot screen.

What's your TWRP verison/ Xposed version that you flashed?

vince.p said:
Hello,
I installed xposed framework on my galaxy s6 tmobile on 6.0.1 marshmallow. I installed it through twrp and after i rebooted the phone wont boot up. The screen is black, but the blue led in the top left corner stays lit. I cant boot into twrp but i can put it in download mode. I also cant turn it off. I watched a video about installing xposed and the guy said that it can take up to 20 minutes to boot the first time after installing xposed. I installed it around 40 minutes ago and it still has not booted up. Does the phone just need more time, or have i bricked my phone? If it is bricked would i be able to put it in download mode and flash stock through odin? Thanks in advance.
update: After some time the phone screen turned on and it is now stuck at the tmobile boot screen.
Click to expand...
Click to collapse
Not sure what version of Xposed you flashed but I've got the same phone and I flashed teh following:
twrp-3.0.2-1-zeroflte.tar.md5
xposed-v81.0-sdk23-arm64-custom-build-by-wanam-20160411.zip
If you still are having problems, you should be able to boot to download mode and try flashing the original firmware via Odin as you suggested. Remember, that if you strike out using Odin, you can also download the original firmware from Samsung Kies or Samsung Smartswitch (once you've booted your phone to download mode which at present you are able to do).

Hey guys,
Shortly after I posted the thread I flashed stock through odin and that fixed it. The version of xposed that i tried flashing was xposed-v83-sdk23-arm64. I will try v81 like cwhiatt suggested. Thank you for the responses.

Do not try until Wanam releases the new xposed module.
Samsung s6 will get into bootloop if u install xposed module now.

VAbaker said:
Do not try until Wanam releases the new xposed module.
Samsung s6 will get into bootloop if u install xposed module now.
Click to expand...
Click to collapse
Wanam does not work with MM (I tried to add screenshot to power menu and it's a no go). I have not had any issues with the Xposed module v81 however.

OK! So i was having the exact same problem.. I dirty flashed MM which went fine. BUT... I previously was running xposed on 5.1 which seems to be the problem, how i don't know but after doing a back up of my important apps then a full wipe.. Installed xposed 81.vers and everything's is good.. After 2 hours of not booting and reading other success stories I knew this was something small to fix... Full wipe if you were running xposed on 5.1 and dirty flashed..

Good to hear v81 works. I gotta try ~
---------- Post added at 01:44 PM ---------- Previous post was at 01:42 PM ----------
How about viper4android ?
Anyone using it without problem ?
I could not make it work.

I installe ver 86 first but phone went to bootloop, then read this guy's comment and tried v81 by directly booting into twrp and flashing the v81 and apparently seems to have fixed it, atleast the phone moved ahead from the 'US Cellular' Boot screen and is now 'optimizing apps' .
Fingers crossed (Y) .
Thanks for suggesting v81 man