Hi All,
I tried to install CM12.1 on top of the Stock ROM:
1. I've downloaded an Official build and GApps and placed them on internal SD card.
2. Since I don't have any Custom Recovery, I've entered Fastboot and flashed a boot image from the build. It flashed fine. I came from SONY where recovery and boot were together on a same partition, so I thought it will give me a CM's recovery.
Now when trying to enter Recovery I'm getting a green robot with red triangle and "!" sign in it. When trying a Normal boot the phone will switch off in the middle of boot animation. Should I install TWRP now separately? Shoudl I fix boot.img somehow?
I can get to the fastboot mode again, but what should I do?
Any advice is much appreciated.
follow the below guide...
Summer Son said:
Hi All,
I tried to install CM12.1 on top of the Stock ROM:
1. I've downloaded an Official build and GApps and placed them on internal SD card.
2. Since I don't have any Custom Recovery, I've entered Fastboot and flashed a boot image from the build. It flashed fine. I came from SONY where recovery and boot were together on a same partition, so I thought it will give me a CM's recovery.
Now when trying to enter Recovery I'm getting a green robot with red triangle and "!" sign in it. When trying a Normal boot the phone will switch off in the middle of boot animation. Should I install TWRP now separately? Shoudl I fix boot.img somehow?
I can get to the fastboot mode again, but what should I do?
Any advice is much appreciated.
Click to expand...
Click to collapse
read the FLASHING RECOVERY column in the below post to install stock and again TWRP...
http://forum.xda-developers.com/moto-x/general/ref-return-to-stock-recovery-rooted-t3027079
Related
Hey guys, I'm having a weird little problem here.
So I followed this guide here, unlocked my bootloader, everything fine.
So far so good. I flashed the mentioned TWRP Recovery through fastboot, no error messages, still looks like everything's fine.
But whenever I try to get from the fastboot screen on my phone into recovery mode, the screen stays black.
I tried restoring to stock, hoping that would add the original recovery back in. Nope, still black screen.
After that, I successfully flashed the recovery from this thread. Again, no error messages and everything looked fine. But still no luck. My recovery screen stays black for whatever reason.
I'm on Windows 8.1 64Bit and using the current Android SDK. The SDK setup had a little problem with finding Java JDK (64Bit) before I could set it up properly. But I solved that one by adding a system variable. Again, nothing out of the ordinary here, at least as far as I understand.
So what am I doing wrong?
I'd really like to get a custom rom with root on this baby. Don't wanna be stuck on stock. :/
Does anybody have an idea, how I could manage to access any kind of recovery in this case?
If the screen stay black then something went wrong
Fastboot gave you the OKAY on flashing ? Did you reboot your phone after you flashed the recovery ?
You don't have to, if you reboot you will have the stock one again = black screen.
Try like i did (assuming you correctly unlocked the bootloader, and installed MotorolaDeviceManager).
1) Get the right recovery for XT1072 from the author's post HERE.
2) Download the latest CM rom from HERE and latest CM gapps package from HERE.
3)Move the CM rom and the gapps zips on the SD or EMMC then reboot to bootloader.
4)Flash the recovery whit "fastboot flash recovery twrp-thea.img" and check if you got the OKEY from fastboot (DO NOT REBOOT YET).
5)Now pick up your phone and use VOL-DOWN to highlight RECOVERY then VOL-UP to start the recovery.
6)You should have the TWRP menu open now, go WIPE -> ADVANCED WIPE and check Dalvik/Data/Cache/System then swipe to wipe those 4 partitions.
7)Go back to main menu and select install, flash the CM12.1 zip then gapps zip and now you can reboot, first boot take a while so don't panic.
P.S.
I uploaded for you the latest untouched platform-tools folder (rev22) for windows if you wish to try this one, LINK, VirusTotal scan.
dr.nic said:
If the screen stay black then something went wrong
Fastboot gave you the OKAY on flashing ? Did you reboot your phone after you flashed the recovery ?
You don't have to, if you reboot you will have the stock one again = black screen.
Try like i did (assuming you correctly unlocked the bootloader, and installed MotorolaDeviceManager).
1) Get the right recovery for XT1072 from the author's post HERE.
2) Download the latest CM rom from HERE and latest CM gapps package from HERE.
3)Move the CM rom and the gapps zips on the SD or EMMC then reboot to bootloader.
4)Flash the recovery whit "fastboot flash recovery twrp-thea.img" and check if you got the OKEY from fastboot (DO NOT REBOOT YET).
5)Now pick up your phone and use VOL-DOWN to highlight RECOVERY then VOL-UP to start the recovery.
6)You should have the TWRP menu open now, go WIPE -> ADVANCED WIPE and check Dalvik/Data/Cache/System then swipe to wipe those 4 partitions.
7)Go back to main menu and select install, flash the CM12.1 zip then gapps zip and now you can reboot, first boot take a while so don't panic.
P.S.
I uploaded for you the latest untouched platform-tools folder (rev22) for windows if you wish to try this one, LINK, VirusTotal scan.
Click to expand...
Click to collapse
YOU ARE AMAZING!!!!!!!
SPENT LIKE 3 HOURS FAILING. AND FAILING. AND FAILING! NEARLY BLOODY BRICKED.
I'll stop capsing.
But this worked!!!!!!!!!!! (I think, currently rebooting after flashing)
THANK YOU!
I tried it again and this time it worked!
Beautiful! :good:
Hi all,
I'm trying to install Cyanogenmod following techbeasts.com tutorial but I'm stuck at the first step : installingTWRP (or CWM).
I followed precisely all the instructions (I allow debugging mode, I installed samsung drivers, I start the phone in download mode, I connect it with OEM cable, I start Odin, it sees the phone, I select the tar.md5 file.), Odin confirms it went well (green box writing "PASS"), but when I try to boot the recovery mode by holding Volume up + Home + Power it seems to boot another recovery software that doesn't offer a backup or a flashing options: "Android system recovery <3e>"
Can't get it to run TWRP or CWM... Can't install the supersu package.
What I'm I doing wrong? Can someone help?
Try to untick Auto Reboot option from odin. I had similiar issues and reason was if you have updated your phone with OTA-updates then it installs some kind of backup script. When your phone boots again after you had installed twrp it installs stock recovery during boot. So untick autoreboot, flash twrp and force boot straight to recovery without letting phone boot to OS. You can also try to pull battery out, put it back and then boot into recovery mode.
Sorry my english and try to understand.
adbhitman said:
Try to untick Auto Reboot option from odin. I had similiar issues and reason was if you have updated your phone with OTA-updates then it installs some kind of backup script. When your phone boots again after you had installed twrp it installs stock recovery during boot. So untick autoreboot, flash twrp and force boot straight to recovery without letting phone boot to OS. You can also try to pull battery out, put it back and then boot into recovery mode.
Sorry my english and try to understand.
Click to expand...
Click to collapse
Great it worked, thanks a lot !
But now I'm stuck on the next step : flashing CM11
I rooted my phone, booted TWRP, chose "install>cm11" (the zip downloaded from nova fusion) but it says "failed" after a few sec...
I would post my TWRP log but the forum prevents me doing so...
Well I get few things that you could check first.
1. Do factory reset for example from twrp. Factory reset is needed/recommended before installing custom rom from offical OS.
2. Sometimes just installing fails almost immediately if you have ticked check zip signature.
After you have installed new rom clear cache and davilk cache just in case. I'll do that every time if I install or update custom roms. Also don't forget to install right gapps package after you have installed rom.
Sorry my english and try to understand.
ok just realized i downloaded the wrong cm image (the odin one, not the recovery)
everything running smooth now
Okay happy to hear that everything is fine now. Happy playing with custom roms
Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit
shatterbb said:
Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit
Click to expand...
Click to collapse
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs
raj_45 said:
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs
Click to expand...
Click to collapse
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode
shatterbb said:
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode
Click to expand...
Click to collapse
is this your problem
raj_45 said:
is this your problem
Click to expand...
Click to collapse
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into bootloader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again
shatterbb said:
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into boot loader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again
Click to expand...
Click to collapse
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?
raj_45 said:
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?
Click to expand...
Click to collapse
Thanks for the replies,I managed to solve the problem and install Cyanogenmod.I guess everything came up to this:
After the first time I installed twrp I decided to wipe my data folder but somehow it was deleted and the partition became raw type which caused
all the bootlooping problems.
Using CWM I was able to get into recovery mode and then I chose to format my data folder and sd card(as ext4 I guess) and the data folder was
recreated.
After that I normally flashed Cyanogenmod and device booted just fine
Hi,
I'm having a bit of trouble. I had a brand new Redmi 4X, and I was advised to install TWRP, root it, and install the Xiaomi.eu rom until LineageOS is released. I unlocked the bootloader, flashed TWRP, managed to get into it once and now I can't do it again. When TWRP loaded it asked me for a password for decryption but it let me just skip it it seems (not sure if that is the problem) but now I can't boot normally, I can't boot into recovery, but fastboot seems to work okay. How do I go about fixing this?
I've tried reflashing TWRP but I still can't get to it, and I don't really know enough about this stuff to know where I've gone wrong.
UPDATE - I think this is to do with dm-verity and having the stock kernel installed. Now it's too late to undo what I've already done, so I hope to god that someone knows how to fix this.
UPDATE - Right, the problem is solved I think. I had to do an awful lot of googling, and I'm not entirely sure what it was specifically that fixed it. But I found a guide that taught me the fastboot command "fastboot boot twrp.img" which saved the day. Even when my phone wouldn't let me into recovery, it allowed me to flash a no-verity.zip which i think is what allowed me to boot, and it allowed me to flash superSU.zip and then the ROM I was aiming for. And now I've booted into the ROM successfully and hopefully I am rooted and all is well. Plus I can access TWRP as normal now.
Any help would be greatly appreciated
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
brljak83 said:
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
Click to expand...
Click to collapse
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
brokemyG2 said:
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
Click to expand...
Click to collapse
Hii
I just have been reading about this bootloop
Go over here and read all of the 6 pages..will not take much time but could help you out much
https://forum.xda-developers.com/xiaomi-redmi-4x/development/official-twrp-3-2-1-0-xiaomi-redmi-4x-t3718217
Hey, I have exactly the same problem. Latest stock rom, flashed twrp in fastboot and got into the boot loop. Nothing works. I can only enter fastboot. What exactly did you do then? What is this no-verity.zip? I can't find anything about it.
I had a problem
I unlocked bootloader then installed redwolf recovery and took a nandroid backup. After that i rebooted to system but stuck into bootloop, could not boot to recovery, could not boot into system, So the only thing worked was that i flashed fastboot rom with mi flasher. And syccessfully rebooted to system with bootloader locked and stock recovery. So, if anyone have same problem you can do the same. How do i install recovery safely again? Should i use TWRP only? Should i flash v3.1.0 with lazy flasher or v3.2 directly without lazy flasher? I don't want to stuck into bootloader again, have to get all data deleted.
So I was restoring the stock boot image so I could flash magisk, and I ran into a bit of a problem. I tried booting it up after flashing, and it's stuck on the boot screen so I'm assuming I flashed a bad boot. This wouldn't normally be a problem, except that my volume up button doesnt work meaning I can't boot back into recovery mode/bootloader. Is there a way to get to the bootloader or recovery screen without using the volume up button?
I think you might have accidentally flashed the stock boot image to your recovery. Have you checked the option to flash the boot image and not recovery?
frosted.efizzle said:
I think you might have accidentally flashed the stock boot image to your recovery. Have you checked the option to flash the boot image and not recovery?
Click to expand...
Click to collapse
I'm pretty sure I flashed to boot, I can turn it on and it just shows the blu logo. Before I had a custom boot image though and it's not showing that anymore though.
I'm assuming that custom boot image came prerooted right? You might need to flash the rom that came with the custom image to boot. An easier way to get Magisk which I've done is to flash rom, then flash the unSU zip to remove traces of root then you can flash Magisk like normal.
frosted.efizzle said:
I'm assuming that custom boot image came prerooted right? You might need to flash the rom that came with the custom image to boot. An easier way to get Magisk which I've done is to flash rom, then flash the unSU zip to remove traces of root then you can flash Magisk like normal.
Click to expand...
Click to collapse
I would do that, except with the volume up button broken I'm unable to get to recovery mode, and without being able to boot into the system I can't use adb