Related
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
TUESONER said:
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
Click to expand...
Click to collapse
try to flash with mfastboot the recovery from 4.4.2 the FIRMWARE U HAVE IT FIRST
MUST BE THE SAME VERSION THAT U HAVE FIRST THAT UR PHONE BRICKED
after u flash the recovery,reboot bootloader and try to flash all firmware
TUESONER said:
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
Click to expand...
Click to collapse
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As danger2u said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> http://sbf.droid-developers.org/phone.php?device=0 ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
KidJoe said:
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As TUESONER said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> TUESONER ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
Click to expand...
Click to collapse
I got my phone with 4.2.2 out of the box, then i recivied the 4.4.2 via OTA, at&t us have the XT1058, would i install the rom on 4.4 fot at&t then flash the modem?
TUESONER said:
I got my phone with 4.2.2 out of the box, then i recivied the 4.4.2 via OTA, at&t us have the XT1058, would i install the rom on 4.4 fot at&t then flash the modem?
Click to expand...
Click to collapse
No. If you received 4.4.2 OTA... you need to flash 4.4.2. do NOT flash 4.4.
Due to changes in 4.4.2, you either will brick, or set yourself up to brick if you try to downgrade your rom version... i.e. 4.4.2 -> 4.4 will brick or set you up for it.
Were you running an ATT ROM on your phone? or something else?
KidJoe said:
No. If you received 4.4.2 OTA... you need to flash 4.4.2. do NOT flash 4.4.
Due to changes in 4.4.2, you either will brick, or set yourself up to brick if you try to downgrade your rom version... i.e. 4.4.2 -> 4.4 will brick or set you up for it.
Were you running an ATT ROM on your phone? or something else?
Click to expand...
Click to collapse
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
TUESONER said:
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
Click to expand...
Click to collapse
I don't know the differences in the ATT Rom vs America Movil... I know the ATT rom has a lot of bloat.
I don't think the ATT 4.4.2 SBF was leaked yet (it wasn't when i looked earlier)...
TUESONER said:
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
Click to expand...
Click to collapse
the only Movil 4.4.2 is this
http://sbf.droid-developers.org/download.php?device=0&file=835
so i think u have this version of firmware on 4.2.2
download it
extract firmware
flash only the recovery
reboot bootloader
then flash entire rom
let us know
KidJoe said:
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As danger2u said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> TUESONER ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
Click to expand...
Click to collapse
This ^^
If you downgraded and then took an ota, that usually leads to a brick. Read the thread kid Joe posted and hopefully you can recover.
Good luck!
Oh, and as said....the best moto x advice there is, is once on 4.4.2.....stay on 4.4.2. Unfortunately.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Thanks anyone for the suport, tomorrow imma try with that rom, i'm reall tired today, was a lng day at my work, i will post the results, again, thanks everyone, wait for my post tomorow.
TUESONER said:
Thanks anyone for the suport, tomorrow imma try with that rom, i'm reall tired today, was a lng day at my work, i will post the results, again, thanks everyone, wait for my post tomorow.
Click to expand...
Click to collapse
kj2112 said:
This ^^
If you downgraded and then took an ota, that usually leads to a brick. Read the thread kid Joe posted and hopefully you can recover.
Good luck!
Oh, and as said....the best moto x advice there is, is once on 4.4.2.....stay on 4.4.2. Unfortunately.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Click to expand...
Click to collapse
danger2u said:
the only Movil 4.4.2 is this
xxx
so i think u have this version of firmware on 4.2.2
download it
extract firmware
flash only the recovery
reboot bootloader
then flash entire rom
let us know
Click to expand...
Click to collapse
It did't work at all, i flashed the recovery then the entire rom, now thce cellphone turn on, then i see the message of the unlocked bootloader, then the screen goes black & for something like half second i see the image of andy (the android caracter) & the legend ''updating'' then another image for half second or less that says ''error''
The rom has flashed correctly, i can enter in fastboot mode too
TUESONER said:
It did't work at all, i flashed the recovery then the entire rom, now thce cellphone turn on, then i see the message of the unlocked bootloader, then the screen goes black & for something like half second i see the image of andy (the android caracter) & the legend ''updating'' then another image for half second or less that says ''error''
The rom has flashed correctly, i can enter in fastboot mode too
Click to expand...
Click to collapse
flash it manually
try another firmware that is 4.4.2 and compatible with ur country and operator
now if turns on is no more bricked. u are on the good way
danger2u said:
flash it manually
try another firmware that is 4.4.2 and compatible with ur country and operator
now if turns on is no more bricked. u are on the good way
Click to expand...
Click to collapse
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
TUESONER said:
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
Click to expand...
Click to collapse
mfastboot
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
danger2u said:
mfastboot
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
Click to expand...
Click to collapse
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
TUESONER said:
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
Click to expand...
Click to collapse
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
KidJoe said:
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
Click to expand...
Click to collapse
he can pass the comand
mfastboot oem config carrier vzw
it works without this too
KidJoe said:
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
Click to expand...
Click to collapse
i will use this one, i erased the line of ''max download size''
TUESONER said:
i will use this one, i erased the line of ''max download size''
Click to expand...
Click to collapse
Is that the exact 4.4.2 ROM that was on your phone originally? If not, there is a chance this still might not fix you...
Its extremely similar to what @danger2u has already posted.
(based on Moto's web site and the XML you posted) after unzipping the "CLARO-BR_GHOST..." SBF, you'd want to try the following commands from the folder where you unzipped the SFB after booting the phone to fastboot/bootloader mode....
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
NOTE: by Mfastboot, I mean the Moto modified version of fastboot, not the one that comes with the standard Android SDK/Platform Tools. The moto modified Fastboot.exe can sometimes be found in a windows folder inside an SBF, or you can download from -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip
KidJoe said:
Is that the exact 4.4.2 ROM that was on your phone originally? If not, there is a chance this still might not fix you...
Its extremely similar to what @danger2u has already posted.
(based on Moto's web site and the XML you posted) after unzipping the "CLARO-BR_GHOST..." SBF, you'd want to try the following commands from the folder where you unzipped the SFB after booting the phone to fastboot/bootloader mode....
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
NOTE: by Mfastboot, I mean the Moto modified version of fastboot, not the one that comes with the standard Android SDK/Platform Tools. The moto modified Fastboot.exe can sometimes be found in a windows folder inside an SBF, or you can download from -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip
Click to expand...
Click to collapse
The ROM isn't the original that was running my phone, i got 4.2.2 out of the box, now i will indtsll thst ROM because is 4.4.2 & i will not brick or have problems, the fastboot that you attached doesn't work with the comands ''mfastboot'' i use just ''fastboot''?
i did it!
GUYS! THANK YOU A LOT! i did it, mi moto X is alive, thanks @KidJoe, @danger2u & @kj2112, you helped me without even knowing me.
I used the comands that @KidJoe gave me, but using just ''fastboot'' everything is working fine, even the 4G connection.
Thanks, really, really thanks... Now i feel i'm a real XDA member & i wish my post help people.
Simple question:
I have a UK **DUAL* SIM Moto G 2nd gen, XT1068, and I wish to flash it to an XT1064, US *SINGLE* SIM Moto G. How do I do this? Do I merely flash the US retail 4.4.4 onto it? I know this process could be carried out on the older 1st gen, to convert an XT1033 to an XT1032 (single SIM) - maybe I am impatient, but I want to try...
If you could advise me how to do this, please do let me know. What I am NOT after, is people asking me "why do you want to do this?" or telling me "Do you know the risks of X, Y or Z?" - I am an experienced engineer who's been using many platforms since the 1980s, I use Linux daily since 2003, and I know what I am doing - I know there are risks (with everything in tech, basically) and dissuasion is not needed, thanks folks
I also wanted to know how to do it :/
Flash kitkat image of us version then update to lollipop see it works but before take a backup of ur system and modem
abhi0502 said:
Flash kitkat image of us version then update to lollipop see it works but before take a backup of ur system and modem
Click to expand...
Click to collapse
Thank you. Okay, so would you mind continuing to explain why I'm backing up system and modem, what i do with them once backed up.... etc? You've given me only minimal information, and I'm not told why I'm doing this or what i do with them once backed up...
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
glossywhite said:
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Click to expand...
Click to collapse
So, wait for the official release
glossywhite said:
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
Click to expand...
Click to collapse
I guess you'd have to keep these backup on your PC, just in case, then you would follow the steps to go stock but with xt1064 files, once you flash it all, you'd start the system and check for update, if there is none, you'd download the zip and flash it by adb sideload. The backup is just for safety. My guess, and some kind obvious, is that your Sim won't work, then you'd have to flash the modem in order to see if at least sim 1 works.
Sent from my XT1068 using XDA Free mobile app
Edit: Yesterday I flashed xt1063 zip but I wasn't getting any update but it did worked. My guess is xt1064 might work
glossywhite said:
Thank you. Okay, so would you mind continuing to explain why I'm backing up system and modem, what i do with them once backed up.... etc? You've given me only minimal information, and I'm not told why I'm doing this or what i do with them once backed up...
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
Click to expand...
Click to collapse
Firstly flash stock firmware images of us which is already present in development thread
Then update to lollipop manually using stock recovery which zip file already present here
If your phone boots then its ok contact me if you have any problems
If u want to go back to kitkat dual sim refere here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
There no need to backup as stock firmware with fastboot already present but do backup your data
rodrigo07 said:
So, wait for the official release
Click to expand...
Click to collapse
Of?
Ah, you presume I am looking to install lollipop? I am looking to convert an XT1068 to an XT1064, I never mentioned lollipop.
abhi0502 said:
Firstly flash stock firmware images of us which is already present in development thread
Then update to lollipop manually using stock recovery which zip file already present here
If your phone boots then its ok contact me if you have any problems
If u want to go back to kitkat dual sim refere here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
There no need to backup as stock firmware with fastboot already present but do backup your data
Click to expand...
Click to collapse
Thank you for your help. I really value it, God bless you
But...if you flash 4.4.4 on a dual sim anda that stuff and you convert it into a XT1064, will the Lollipop ota arrive?
laureano97 said:
But...if you flash 4.4.4 on a dual sim anda that stuff and you convert it into a XT1064, will the Lollipop ota arrive?
Click to expand...
Click to collapse
It doesn't matter - I've tried this twice tonight with fastboot errors, so I decided to err on the side of caution and restore stock UK XT1068 firmware, and wait... hehe
I could successfully convert XT1068 to XT1064 and installed Android Lollipop
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb AND "WORKS LIKE A CHARM"...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Chetsan Manjunath said:
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Click to expand...
Click to collapse
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
No luck
rodrigo07 said:
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
Click to expand...
Click to collapse
Thank you for your reply....Tried just now still no signal...any other way?? i guess i need the kernel image to be flashed where can i get that..??
rodrigo07 said:
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
Click to expand...
Click to collapse
hello rodrigo07 i got the same error and tried the same procedure you passed reinstalled the modem from my original rom not got more success trying to work it more I think it will be better to wait original lollipop should not take out sorry for my bad english
Chetsan Manjunath said:
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb AND "WORKS LIKE A CHARM"...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Click to expand...
Click to collapse
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
abhi0502 said:
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin mfastboot.exe erase modemst1 mfastboot.exe erase modemst2 mfastboot.exe flash fsg fsg.mbn mfastboot.exe erase cache
mfastboot.exe erase userdata
Click to expand...
Click to collapse
Ok...Thank you...please be online i am gonna test it immediately and post the feedback...
humm so there is people here who has converted to US single sim and they are enjoying it right? without network problems, for example, in Europe?
abhi0502 said:
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
Click to expand...
Click to collapse
I am downloading CA firmware now RETCA_XT1064_4.4.4_KXB21.85-16_cid14_CFC.xml.zip...Can i flash NON-HLOS.bin and fsg.mbn of CA for it to work now??
Chetsan Manjunath said:
I am downloading CA firmware now RETCA_XT1064_4.4.4_KXB21.85-16_cid14_CFC.xml.zip...Can i flash NON-HLOS.bin and fsg.mbn of CA for it to work now??
Click to expand...
Click to collapse
Flash all command i have given
U need to check which firmware has single sim then try
Hello.
From the beginning. I took part in the tests, Motorola 4.4.2. but KK is crap for me, so I unlocked the bootloader, I installed version 6.1 RSD .... and I threw the system 4.1.2 EU (Germany phone I) .All went well with a small problem. when I flash information appears:
dismatched partition entry array crc32
fastboot reboot reason this bootloader.
However, the phone back to 4.1.2,starts normal.,updates are ok,working good but the phone screen flashes regularly when unlocked(in recovery flashes to).I tried with several firmwares EU and GB., with edited and not edited file CFC.XML ( lines gpt and partition).
How to fix it step by step?
Maybe should I install different rom,or again install 4.4.2.
Please help.
Thank you
The KK update updates the gpt.bin (partition table). So when going down to 4.1.2 u flash the system/recovery/boot images on a partition that may be smaller or larger than intended and could cause this problem. This is maybe not true. U maybe can go back by flashing the gpt.bin from the KK update. Can be found in any of the zip files from the BR KK update. Flash it through fastboot. The command on how to flash it should be in one of the xml files in an rsd-lite zip. And than again flash the system/recovery/boot through mfastboot on your device and not rsd-lite.
Use this at your own risk obviously!!!
Oh my so it's not so simple to repair phone.Difficult to find broken files and weak knowlegde of fastboot for me.What do you think...Maybe I should try install unofficial rom based on JB or KK to Razr I ? Are there any roms unofficial?
Yesterday I have read :
INDEX/GUIDE, ALL Things RAZR I and downloaded some files.I have an idea .Maybe should now downgrade from JB to ICS and after that update OTA to JB ? Unfortunally links SBF with firmwares are dead and don't know where to find working.What you think about that ? Is it bad idea?Much easily will be just find gpt.bin (I found it and downloaded from Brasil version of KK ) and flash it somehow?
OK here is solution :
From some reason my phone wasn't recognised in fastboot but command line worked well.
OK so I've installed fresh rom(4.1.2 EU) via mfastboot .
Commands :
mfastboot flash gpt.bin from KK version (oryginaly was gpt gpt_signed from4.1.2)
mfastboot flash motoboot motoboot
mfastboot flash boot boot_signed
mfastboot flash recovery recovery_signed
mfastboot flash motobp motobp
mfastboot flash system system_signed
mfastboot flash cdrom cdrom_signed
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
After few minutes starts to flashing again.Even on screen "warning unlocked bootloader"
Phone back to life after installing: [ROM][Kitkat] Unofficial Cyanogenmod 11 via TWRP . Nothing flashes ,no problems,everything works great!
THX HAZOU for your help .
I downloaded Android Marshmallow after reading news about it through settings/about/system updates.
After downloading, the phone restarted but updatation was stuck after flashing TWRP screen (error screen photo attached)
My phone is
bootloader unlocked,
recovery TWRP
rooted
ROM is stock.
It seems the OTA update will be completed once I have stock recovery,
I have following queries
Is it necessary to revert to stock recovery to complete OTA update?
If yes, how to achieve it, what i learnt through search, I need to find Stock ROM zips and extract recovery (boot.img) and then flash it through adb?
where to look for thea stock rom and is there any easier method
It's risky, a lot of users here for some reasons got stuck whit locked/unlocked bootloader unable to boot and flash anything.
Here you can find all the motog stock roms http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=50
You should wait for the complete rom image for your country/model to pop there instead doing that risky thing you want do.
Thanks
Recently stock rom for xt1079 has been added to the list.
But I m trying to download from filefactory since yesterday but due to some reason, it stops in between and resume isn't supported.
Are there any other hosts
Are you sure the region of that xt1079 is right for your phonr ? check the phone box and the info inside settings to know which region/carrier you have, you must use the same identical 100% stock to avoid problems
And, do no relock bootloader !!!
yes i bought this through online retailer in India.
It is xt1079 Asia
I see in xda forum of moto g 2nd gen most of the time ppl are talking about xt1078.
What's the difference between xt1078/1079 and can't I use xt1078 ROM.
Rooting procedure meant for xt1078 worked fine for me
And Sir is relocking bootloader very risky ? suppose something goes wrong wont I be able to unlock or restore nandroid backup.
Thanks to support from Dr.nic I am finally on android 6.0
Although I have relocked my bootloader, but it is recommended to leave as it is.
If anyone stumbles here with same problem like mine i.e. unable to upgrade to android 6.0 just because of custom recovery, then pls download the firmware from filefactory.com link and flash. I'll add flashing commands as well to this post in near future.
if you have already done this rom change etc, the you must already be having fastboot, adb etc.
after connecting in fastboot mode holding VolDown and Power for few secs
run following commands
[this is for android 6.0 firmware]
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
I am not great expert, do this only if you have some idea, I may not be able to help you much if something goes wrong.
I can only say it worked for me
Hi All!
Here is my situation, I have a moto g xt1072 (Jan 2016) which came with a faulty problem, no sound after 5 seconds of been started. I checked everything (Factory reset via recovery), including both speakers, (both working at 7.5 ohms). Do you think a firmware change or a different ROM can help or it's time to let it go?
Base band: M8926_309101.02.03.19R THEA_EMEA_CUST
Kernel: 3.4.42-gef77327 [email protected] #1
System Version: 24.41.34.thea_retes.retesall.en.EU retes
Complation numer: MPB24.65-34
Everything is stock, no changes were made.
Thanks in advance!!!
@lost101
did you look here
http://forum.xda-developers.com/moto-g-lte
sd_shadow said:
did you look here
http://forum.xda-developers.com/moto-g-lte
Click to expand...
Click to collapse
Yep, if you are familliar with this process could you mind writing me a list of steps in order? I'll investigate 1 by 1 later, I've found so much info that's confusing. My phone is unlcock for any cellphone company, but It's not root, it's stock.
I used to install custom ROM's on my old Defy + but I things are very different now for what I'm seening. :S
Fastboot flash the latest full factory firmware image for your model.
mfastboot download: https://www.androidfilehost.com/?fid=24052804347778493
XT1072 Retail Spain Android 6.0 Factory Firmware Image: https://www.androidfilehost.com/?fid=24533103863143791
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219 (See specific fastboot commands below)
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
murrayhawk said:
Yep, if you are familliar with this process could you mind writing me a list of steps in order? I'll investigate 1 by 1 later, I've found so much info that's confusing. My phone is unlcock for any cellphone company, but It's not root, it's stock.
I used to install custom ROM's on my old Defy + but I things are very different now for what I'm seening. :S
Click to expand...
Click to collapse
please dont mess up the flash.. because then you're pretty much ****ed.. as far ive seen and read and heard and tried, there will be no fix..
lost101 said:
Fastboot flash the latest full factory firmware image for your model.
mfastboot download: https://www.androidfilehost.com/?fid=24052804347778493
XT1072 Retail Spain Android 6.0 Factory Firmware Image: https://www.androidfilehost.com/?fid=24533103863143791
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219 (See specific fastboot commands below)
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Click to expand...
Click to collapse
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
ora69 said:
please dont mess up the flash.. because then you're pretty much ****ed.. as far ive seen and read and heard and tried, there will be no fix..
Click to expand...
Click to collapse
I don't have anything to lose, this phone is rebooting itselft every 2 minutes.
murrayhawk said:
I don't have anything to lose, this phone is rebooting itselft every 2 minutes.
Click to expand...
Click to collapse
please, if anything gives a fail, post it on the thread! I myself have hard bricked this device, and now im trying to find the testpoint for it, ive already invested hours into this.. and i have no progress!, its worth it to post it on a thread
murrayhawk said:
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
Click to expand...
Click to collapse
The guide I linked to is not about downgrading. Ignore references to Android 4.3 - it still applies to Android 6.0. It sounds like you have not installed the usb drivers for your phone in Windows. This is a prerequisite. These Moto G drivers will also work for your phone:
Moto G USB Drivers (WinXP/7/8/10 32Bit-64Bit)
Test Fastboot is working by typing: fastboot devices
You may also be able to use RSD Lite - but this again will require you have installed USB drivers for your phone.
murrayhawk said:
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
Click to expand...
Click to collapse
my opinion is use RSD lite first, unless there is not a specific firmware file for your carrier/region...
or there is a high rate of flashing failure with the firmware available.
if RSD lite fails, best to post errors from pc and phone here
before try again, if there's not an obvious fix
then try mfastboot.exe
fastboot.exe is generic android, mfastboot.exe is Motorola specific, for moto's unique system.img...
avoid usb 3.0 ports
make sure the firmware downloaded is correct size, verified MD5 is best.
verify drivers are correct when the device is in fastboot mode
I have generic moto instructions in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
sd_shadow said:
my opinion is use RSD lite first, unless there is not a specific firmware file for your carrier/region...
or there is a high rate of flashing failure with the firmware available.
if RSD lite fails, best to post errors from pc and phone here
before try again, if there's not an obvious fix
then try mfastboot.exe
fastboot.exe is generic android, mfastboot.exe is Motorola specific, for moto's unique system.img...
avoid usb 3.0 ports
make sure the firmware downloaded is correct size, verified MD5 is best.
verify drivers are correct when the device is in fastboot mode
I have generic moto instructions in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
i think the tip you gave to avoid usb 3.0 ports will really help, didnt realize i was using the usb 3.0 port
Ok, this is what I did so far: (I'm running Windows 7 64b).
1. RSD Lite 6.2.4: Installed
2. Motorola Mobile Drivers Installation 6.4.0: Installed
3. Motorola Device Manager: Installed
1. I started the mobile into the recovery mode
2. Connected the moto cable to the pc
3. Opened RSD Lite, loaded the new firmware and hit start boton
4. The process reached a "please reboot manually...."
5. The phone starts but with the old firmware in it.
More Updates: I ran mfastboot sequence and every command returned OKAY. The issue still remains intact, sound works for 5 seconds, and the firmware has not been updated.
Any thoughts?
murrayhawk said:
More Updates: I ran mfastboot sequence and every command returned OKAY. The issue still remains intact, sound works for 5 seconds, and the firmware has not been updated.
Any thoughts?
Click to expand...
Click to collapse
I want to see a full and complete log of the fastboot flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
lost101 said:
I want to see a full and complete log of the fastboot flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Click to expand...
Click to collapse
Ok, please check the attachment.
It looks increasingly like your issue is hardware, not software related. The only remaining software option I can suggest is via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22
lost101 said:
It looks increasingly like your issue is hardware, not software related. The only remaining software option I can suggest is via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22
Click to expand...
Click to collapse
Can you explain why does it retain the original firmware after mfastboot commandas ran well?
Just a quick reminder. This moto g XT1702 Jan2016, is not rooted, bootloader is locked and has everything stock, it came with Android 6.0 installed.
murrayhawk said:
Can you explain why does it retain the original firmware after mfastboot command as ran well?
Click to expand...
Click to collapse
How do you mean original Firmware? You are flashing a Stock Android 6.0 firmware image.
lost101 said:
How do you mean original Firmware? You are flashing a Stock Android 6.0 firmware image.
Click to expand...
Click to collapse
What I have right now is : System Version: 24.41.34.thea_retes.retesall.en.EU retes and after flashing to XT1072_THEA_RETES_6.0_MPB24.65-34_cid7_subsidy-DEFAULT_CFC.xml. I'm still having 24.41.34.thea_retes.retesall.en.EU retes.