Well,
Code:
Model number
E15i
Android version
2.3.7
Baseband version
M76XX-TSNCJOLYM-53404015
Mem info
37MB/175MB
Mod version
GingerCruzt
Build number
GC84.246
That's the info on my phone.. It's rooted and all, could someone please explain me like to a 5 year old how to install this rom?
I'm good with computers, still bad with all those phones thingys.
Thanks in advance
i had the cyborgv6 rom its nice. as a cyborg rom to install should be like this:
First if you want make a back up with for ex. Titanium backup or something else.
1. if you dont have xrecovery or CWM recovery search and find them and install one of them. see here:
http://forum.xda-developers.com/showthread.php?t=974527 or
http://forum.xda-developers.com/showthread.php?t=881614
2. download the stock kernel rom and put it on sd card.
3. Reboot to xRecovery (click back button on ericsson logo)/ ClockWorkMod(touch the screen instead of click)
4. Factory Reset (Full wipe) ------> For new users who want to this rom.
5. Install custom zip
6. Choose zip from sdcard
7. Find your zip file, and flash it.
(* If you have any bugs, try full-wipe.) For first time installing CyBorg users, DO FULL WIPE, or you will stuck at the se white logo!!
8. reboot
see his page of previews version, the instructions are from here
http://forum.xda-developers.com/showthread.php?p=17850024#post17850024
if i helped you know...
arikos said:
i had the cyborgv6 rom its nice. as a cyborg rom to install should be like this:
First if you want make a back up with for ex. Titanium backup or something else.
1. if you dont have xrecovery or CWM recovery search and find them and install one of them. see here:
http://forum.xda-developers.com/showthread.php?t=974527 or
http://forum.xda-developers.com/showthread.php?t=881614
2. download the stock kernel rom and put it on sd card.
3. Reboot to xRecovery (click back button on ericsson logo)/ ClockWorkMod(touch the screen instead of click)
4. Factory Reset (Full wipe) ------> For new users who want to this rom.
5. Install custom zip
6. Choose zip from sdcard
7. Find your zip file, and flash it.
(* If you have any bugs, try full-wipe.) For first time installing CyBorg users, DO FULL WIPE, or you will stuck at the se white logo!!
8. reboot
see his page of previews version, the instructions are from here
http://forum.xda-developers.com/showthread.php?p=17850024#post17850024
if i helped you know...
Click to expand...
Click to collapse
oh, wow, seems I accidently a link, this is the right rom I was gonna install
http://forum.xda-developers.com/showthread.php?t=1576968
Are the instructions work the same? cause they have there a whole lot of files (Alfs Kernel Lastest v08a?)
same process! if you are in stock kernel(settings-about phone if its semc) just download only "Stock version rom in Attach Files " and follow the instructions
if i helped press, you know...
arikos said:
same process! if you are in stock kernel(settings-about phone if its semc) just download only "Stock version rom in Attach Files " and follow the instructions
if i helped press, you know...
Click to expand...
Click to collapse
which of the files for download there is the rom? and how do I install the other files?
in the page you gave go to:
{
Downloaded:
LX v.0.11c(Alfs) LX v.0.11(Stock)
LXv0.10-Alfs LXv0.10-Stock
LX V11 GOOGLE APPS LX V11(ALFS)LX V11(STOCK)
LX XG!N V8(Stock)
LX V10(alfs)LX V10 (Stock)
}
LX v.0.11(Stock) THIS is the ROM for stock kernel just download it
the attached files (SensorPatch.zip ...) you can download them IF you want to make it better
by same procedure as to install, "put them on sd card-go to recovery - install custom zip-Find your zip file, and flash it-reboot" but not make Factory Reset (Full wipe) its unnecessary.
By the way on instructions i gave, from the step 4 till 8 are in the recovery. to go there follow the step 3 "Reboot and go to xRecovery by (click back button on ericsson logo) or on ClockWorkMod(touch the screen when you see ericsson logo)" you must have one of them if you already have a custom rom installed "GingerCruzt"
Root Galaxy Note – Safest Method with no loss of data
(reference to cursed4eva-dev)
Tutorial to Safely Root the Galaxy Note:
This is my preferred method to root the Galaxy Note GT-N7000 and here are the reasons why,
Advantages:
1. SAFE
2. Works with the 4.0.4 update
3. Minimal downloads – 3-10mb max
4. Quick – 2-5 Mins Approx
5. No loss of apps or Data
6. Counter does not increase (can unroot and avail warranty if needed)
7. Can be done without a PC
Disadvantages:
1. MicroSD Card Required
2. Works only with ICS (Android 4.0)
Caution:
For 4.0 only.
Follow all steps properly, do not proceed with rooting if u don't understand even one step.
Proceed at your own risk, i am not responsible for any problems.
Step 1. Download SuperSU.zip and transfer it to the root of your Micro SD card.
Step 2: Press Up Volume + Power + Home and hold till the phone reboots and you see Samsung Galaxy Note displayed on screen, at which point you can let the keys go.
Step 3: Now you should be in Android system recovery, select “apply update from external storage” (as shown in the image to the right) and select SuperSU.zip that we transferred earlier.
Step 4: Once Complete hit “reboot system now”
We have ROOT now, we set out the root the Galaxy Note and have done it
If you just want to run Root apps like Titanium Backup you are done here but if you want to flash custom ROMs, Kernels, Mods, Themes and so on continue…
Step 5:. Get Mobile ODIN Pro from the PlayStore or alternatively Mobile ODIN Lite from XDA.
(Id highly recommend the PRO version if you plan on flashing a lot of custom Roms, Kernels and so on)
Step 6: Download the SpeedMod Kernel and transfer it to the Internal/External Sd.
Step 7: Open Mobile ODIN and get through the initial screens (Grant Access, Let it Downloadany files if needed) and then click Kernel and navigate to wherever you have saved SpeedMod Kernel and select it and hit Flash Firmware.
BAM! We now have FULL ROOT with A SAFE Custom Recovery for the Galaxy Note!!!
dude easier one.
Download the philz kernel..boot into recovery, install zip from sd, choose philz, reboot,
BAM! u have root, safe kernel, and clockworkmod latest touch recovery.
nokiamodeln91 said:
dude easier one.
Download the philz kernel..boot into recovery, install zip from sd, choose philz, reboot,
BAM! u have root, safe kernel, and clockworkmod latest touch recovery.
Click to expand...
Click to collapse
im just giving alternatives
The Gionee M2 has a MT6582 Mediatek chipset.
Follow the Gionee guide on their site for upgrading to KitKat, before you start the process, replace the recovery.img file in the ROM file you downloaded and extracted and replace it with a CWM or Carliv touch recovery file that works for the JB versions, this will give you a custom recovery (power button + up key when booting)
The 800Mb+ KitKat ROM update file has about 300mb of pure bloatware, unknown games etc.
ROOT:
Enable USB debugging
Download SuperSU from the playstore (we will use it to replace the chinese SU file later)
Download RootMaster (google it), this is an apk file probably made by the same chinese dev's who made Vroot
Make sure wifi is on, run RootMaster, all text is chinese, but the press to root button is english, it works, if it doesnt the first time try again (dont press anything else, it has a ton of crapware)
It should prompt that your phone is rooted, give it some time, it actually downloads a chinese version of SU
Now run SuperSU, it will replace the chinese version with the familiar english SuperSU ( although the chinese SU app with the lion emblem and chinese text will still be on your phone)
I recommend doing a full factory reset at this stage and using a root uninstaller app to remove all traces of this chinese RootMaster SU
Xposed Framework:
The amigo system resources interferes with Xposed you can still get it to install the framework by first installing the Xposed apk and then going to the settings of the Xposed installer and checking the box "Disable resources API", this will mean GravityBox WILL fail.
-------------------------------------------------------
Framaroot Doesn't work anymore
The best way to root this is to use Framaroot, Barahir exploit.
Although the Framaroot page on XDA does not list this as a compatible device (yet) it works really well.
All credits for Framaroot go to alephzain : here
------------------
This still works
BACKUP ROM WITH MTKTOOLS:
Download the awesome MTK Droid Root & Tools by rua1 from here
There are many detailed tutorials for using the actual tool ( I used v2.5.3) with detailed pictures etc., I wont reproduce them here, but before you read and follow the tutorials, make sure, your phone is rooted, you have the ADB drivers for your MT6582 chipset and the microsd card you put inside your phone is formatted inside the phone otherwise the backup will throw an error
Create & Install CWM:
Dev rua1's MTKTOOLS can also create a CWM image automatically from the boot.img that is created in the above step. There are detailed tutorials already available on many sites that show step by step how to do this. Installing CWM is up to you, either via Mobile Uncle Tools from the playstore (recommended) and the freshly minted CWM image or via SP Flash Tools using the Backup of ROM created with MTKTOOLS
Getting to Recovery - Hardware Keys
Getting directly to CWM when the phone is shutdown requires the following key press combination:
For KitKat:
Power button + UP volume button gets you to a custom recovery (should you have one)
Power button + down volume button gets you into Factory Mode (Gionee Factory Mode)
For JB:
Press Volume Keys UP/DOWN and Power button simultaneously
Let go once you reach a screen that shows 3 options, here choose recovery, it will then boot directly to CWM
Can u provide M2 Stock Rom Link ???
Sent from my M2 using XDA Premium 4 mobile app
---------- Post added at 06:34 PM ---------- Previous post was at 06:10 PM ----------
MTK droid tool 2.5.3
http://www.mediafire.com/?6z9acf5um65cuj2
Sent from my M2 using XDA Premium 4 mobile app
Want rom for m2
i want custom rom for my gionee m2
Xposed Framework & Stock / Custom ROM's
Xposed Framework works fine on the rooted Gionee M2.
While several modules (like Xprivacy) work, GravityBox via Xposed download fc's, use the GravityBox Apk instead
As for M2 Stock ROM, I suggest take a backup of your own phone ROM, there is little chance that Gionee will make stock ROM's available for M2 (a very new device) anytime soon.
For other Gionee ROM's (stock) external sites like androidXDA have a few ROM's for download but none for M2
There are no custom ROM's for M2, if you want a smoother/cleaner experience try uninstalling some bloatware and change the DPI using an Xposed module.
Request
Hey, it would be nice if you could customize the backing up ROM and re flashing tutorials for the for the m2. It would be quite helpful, you know which set of options to choose etc... beginners like me could make a mistakes with regards to those, since you have already done these procedures your experience could prove valuable. also do you know if the bootloader is unlocked on this phone? and how to check that?
rjspark89 said:
Hey, it would be nice if you could customize the backing up ROM and re flashing tutorials for the for the m2. It would be quite helpful, you know which set of options to choose etc... beginners like me could make a mistakes with regards to those, since you have already done these procedures your experience could prove valuable. also do you know if the bootloader is unlocked on this phone? and how to check that?
Click to expand...
Click to collapse
Being a long time lurker on XDA, I've not managed to rack up enough posts to link to external sites, I tend to find most answers by lurking
But here goes (credits go to the original tuts on other sites): Warning, you may brick your device. This will void your warranty. You should know the risks.
Pre-requisite Steps:
Enable debugging mode on your phone. From your homescreen, tap the Menu button > Settings > Development. Tap 'Debug Mode' and make sure it's checked
Root your M2 using Framaroot, use Barahir exploit
Install Busybox from the Playstore on M2
Download MTK Droid Tools v2.5.3 from XDA, chrome tags this as malware (its not), if your AV detects this as malware then dont worry, its a false positive , disable your Anti Virus tool for good measure for the remainder of your backup job, unzip the MTK tools you downloaded
Make sure the microsd card you put inside your phone is formatted inside the phone otherwise the backup will throw an error - this step is impt.
Connect M2 via USB cable to your PC,Download the ADB drivers for M2, use PDANet (google it) and run it, ADB drivers should get automatically installed; this step is critical, so make sure it works
BACKUP ROM WITH MTKTOOLS:
Go into the extracted MTK Droid Tools folder and right-click on 'MTKdroidTools.exe'. Select 'Run as administrator'.
Wait while MTK Droid Tools communicates with your phone. You'll eventually see the main screen come up with all of your phone's information. Look in the bottom left hand corner of the main window, you should see a green square (if it's yellow, click the 'root' button in MTK Droid Tools, this may trigger SuperSU on your phone to ask you for granting it root, grant it)
In the main menu of MTK Droid Tools select the 'Root, Backup, Recovery' tab
Click the 'Backup' button. MTK Droid Tools will start to read all the data from your phone - this takes a long long time, the log is shown on screen, (if it hangs for very very long time (>45mins) on some step (like backup of system.img) you can pull the USB cable out of the phone and restart it)
After it's finished reading back the ROM, another window will pop up asking you if you'd like to compress the image. Select 'Yes'. This will pack it up into a zip and then let you know it's finished.
CREATE YOUR CWM & INSTALL:
Go to the playstore and download Mobileuncle MTK Tools
Connect the phone to PC via USB (if not connected already) and run the MTKDroidTool as administrator
Go to 'root, backup, recovery' tab
Tick the 'To choose the boot.img file' option - the boot.img got created when you took the backup of your ROM, all files from the ROM backup process are saved inside the MTK Tools folder
Click the 'Recovery and Boot' button
Look for the 'boot.img' file and then open it
You will be asked whether to create the CWM recovery automatically, select 'yes'
MTKDroidTools will prompt you whether to install patched files to the phone, say 'No, then it will prompt you if you want to install the CWM recovery that was created, say "No" - we will use MobileUncle Tools for this, its much cleaner
The process fill be finished, and you can now quit MTKDroidTools
In MTKDroidTools folder, you will see a new folder named 'recovery', and in the folder, you will see two .img files; one with the prefix 'boot' in it, and another one with the prefix 'recovery' in it, copy just the .img file with the prefix 'recovery' to the root of your microSD card
Start MobileUncle Tools in your phone, give it root, its a chinese app, but has english title names as well, select the 'Recovery Update' option, select the recovery .img file you have copied to the root of your microSD card, it will prompt you if you really want this, say 'OK'
The flashing process will run, and then you will be asked whether to boot into recovery mode, say yes and you will boot to CWM, you can now take a nandroid backup as well
Like I mentioned earlier, I'm a lurker on XDA, not a dev, so I may not be able to help beyond this
I have problem in CWM whenever I tried to mount Usb storage it gives error as :
"E:unable to open ums lunfile(no such file or directory)"
I have tried to port Cannibal Open touch recovery as well as Carliv but I think in our phone mout points are conflicting with default CWM mount points. If anyone have any solution most welcome for solution I am ready with Custom Roms for our Phone Gionee M2 but strucked in CWM ,if CWM will not work than we will be not able to flash any ROM.
Re:EDIT
ALL PROBLEM SOLVED!!!!!!
New Touch Based Carliv Recovery
Click HERE
NEW ROM LINKS ADDED
CLICK HERE
OR
CLICK HERE
Shivam Bhalla said:
New Touch Based Carliv Recovery
Click HERE
Click to expand...
Click to collapse
Successfully flashed this Carliv recovery img, in my Gionee m2. want to try new OS:laugh:
Guys check out Miui ported by Arnab
http://forum.xda-developers.com/showthread.php?t=2711816
OP plz mention these 3 roms in the first post! i hope more development is seen for Gionee M2
very good
very good thread helped me alot
rishiandri said:
Guys check out Miui ported by Arnab
http://forum.xda-developers.com/showthread.php?t=2711816
OP plz mention these 3 roms in the first post! i hope more development is seen for Gionee M2
Click to expand...
Click to collapse
installed today but reverted back to ASOP Rom, this rom needs some updates and bugfixs,
Scatter File of Gionee M2
Can anyone please give me scatter file of Gionee M2...
Kalpesh Sharma said:
Can anyone please give me scatter file of Gionee M2...
Click to expand...
Click to collapse
enjoy
Thanks for the scatter file.....
Anyone plz. port SamFlare V5 to gionee m2
Here is the link for the ROM
http://forum.xda-developers.com/showthread.php?t=2530755
Error with borohir with frama 1.9.2 su
Sent from my M2 using XDA Premium 4 mobile app
Try with Framaroot 1.9.0 "barahir".. I rooted my phone with this version and also rooted 3 more with same.
Sent from my Gionee M2.
Use Framaroot 1.9.2 And Click Barahir to root your gionee m2....
Hit THANKS if i helped u....
Hey everyone!
When I had purchased my Note 4 (SM-N9108v) in China, I had not realized that it would not include GAPPS. When I had received the phone, I had felt helpless because I was not able to find any threads anywhere which helped solve my problem. Recently, I figured out how to do this and successfully installed GAPPS. I thought I could help others with this problem.
Alright lets start!
Step 1: Rooting your device and installing CWM
Root your device! - This wont work without root. Don't expect to get GAPPS without root.
You must also install CWM - CWM will flash the GAPPS to your phone.
Here is a video tutorial on how to do both of these: https://www.youtube.com/watch?v=MC2iUtm6oVQ
Step 2: Installing the GAPPS
Now the easy part!
Download the GAPPS which correspond to your version -
4.4.4 Kitkat: http://highonandroid.com/android-apps/download-android-4-4-4-gapps/
5.x.x Lollipop: http://forum.xda-developers.com/android/software/reborn-gapps-5-t3074660
DO NOT EXTRACT THE FILE
Put the unextracted file into your phone in a directory you can navigate to.
After this, boot your phone into recovery mode. To do this, you press and hold the home button, power button and volume button at the same time.
You will be presented with the CWM menu. Navigate to "Install zip from sd card". Select it and locate your GAPPS that you had previously put into your phone. Follow through within this menu and select install and press yes. After this, CWM will start to flash these GAPPS onto your phone. Once this is done, navigate to back on the CWM menu and return to the main CWM screen. Then select reboot phone. Your phone will now reboot and start optimizing apps. After this, the GAPPS should be installed!
---
I hope this guide helped you! If you were confused by the above, feel free to drop a reply
which cwm recovery for a true chinese note 4 sm-n9100 ?
Hi, thanks for the great post.
I got to the root stage. but now I do not know which CWM recovery to download on my pc and use for the recovery on the note 4. Do you recommend any?
Thanks
kr57 said:
Hi, thanks for the great post.
I got to the root stage. but now I do not know which CWM recovery to download on my pc and use for the recovery on the note 4. Do you recommend any?
Thanks
Click to expand...
Click to collapse
Yes, I have phone model xm-n9100, which is not listed in the sight that was linked in the video. any one know? btw, I used the following sight tutorial to root my phone which had 5.1.1 installed.
h t t p : / / w w w . gadgetstroop .com / 2015 /04/root- samsung- galaxy-note- 4-duos-sm- n9100 .html
edit: I found it here:
https : // forum.xda - developers . com / note - 4 / snapdragon - dev / trltexx - philz - touch - t2927930
Hi guys, I have seen many requesting for a CyanogenMod based rom for Micromax A177, so here it is..
Code:
I am responsible for any bricked devices try it on your own. Though its tested in Micromax Juice A177.
Name : CyanoX
ScreenShots In the attachments
Requirements:
(i) Micromax A177 rooted & CWM recovery installed
(ii) CyanoX.zip
Procedure:
1. Download the CyanoX invinity_By_Surajit,zip file
link : Mod edit: Malicious content removed.
2. Copy the zip file to ur external sd card root folder
3. Switch Off your mobile
4. Enter recovery mode (By pressing Volume Up+Power Button)
5. Wipe data
6. Wipe cache
7. Wipe dlvik cache
8. Install zip form sd card
9. Chose zip from sd card
10. Browse to the location you saved the file
11. Select the "CyanoX invinity_By_Surajit.zip" file
12. Select Yes
Now wait for the installation to finish.
After installation is complete the device will reboot automatically .. It can take upto 10 mins to complete the boot.
Note : I didn't made this rom, I just made few changes to make it compatible with Micromax A177. So thank the guys who made this rom... Enjoy
If anyone have any issues plz let me know...
Everything was done perfectly and the phone restarted...After that ASUS logo came and it was loading for more than 1 hour and nothing happens. What am i supposed to do ?
Threat Warning: android.gemda.a
I downloaded the file from the given link but the Quickheal's free Antivirus in my device said that the file is infected win threat android.gemda.a . Please help, I can't install a infected ROM in my device.
Thread closed and link removed.
Download contained 3 threats.
One high severity virus and two PUPs.