Database Develop

[Aroma][Boot Animation Pack] Android Boot Animation Installer | Pack of 15 Animations

15 Android Boot Animations with Aroma Installer.
»»»»» All-in-one bootanimation installer with aroma installer support. «««««
Click to expand...
Click to collapse
Things you will need:
1. A rooted phone.
2. Custom Recovery (TWRP, CWM)
Note: If you are on Cyanogen Mod rom or any theme related rom, just change your bootanimation to systems one.
If you are using cm rom change your boot animation to android pack.
Click to expand...
Click to collapse
How to use:
1. Boot to recovery (TWRP OR CWM)
2. Select Install.
3. Choose IND_TechNitiUm Boot Animation Pack.
4. The Aroma Installer will start, so just choose the preferred boot animation and hit next.
5. Your Bootanimation will be installled.
6. ENJOY
Well these boot animation are tested and they are awesome but i dont hold any guarantee for them to work on your device. And i am not responible for Bricked phones. Also my phone is a Lenovo A536 with a 5 inch screen so they work perfectly on it , but they may not be scaled on your device.
Click to expand...
Click to collapse
DOWNLOADS:
IND_TechNitiUm Boot Animation Pack

Bootlogo Maker Tool for CherryMobile G1 / GeneralMobile 4g/ i Mobile iQ II by Kalvin

Last time i share my Generated Bootlogos
Today i Will share my BootLogo Maker Tool
Kalvin Bootlogo Maker Tool CherryMobile G1 / GeneralMobile 4g / i-mobile IQ II (Seed) (QCOMM)
Instructions :
1. First download the tool from the link provided
2. Extract the installer from the zip,then run it check the license agreement first,
it will run on 32 bit & 64 bit Windows system,
after installation run the ReadMe file,
3. The default location of the folder after installation is
C:\Kalvin BootLogo Maker (SEED)\
,its on you where you want to install the tool
4. After installation go to the folder you will see the application
BootLogo Maker Tool.exe ,put your logo.png in the folder you can drag your logo.png
to BootLogo Maker Tool.exe or you can just run the BootLogo Maker Tool.exe
Dont forget to put your logo.png in the folder,image is not exceeding 200kb
if the image exceeds to 200kb , you have to compress your image first
5. After you Drag the logo .png or you just run the app, the splash.img will be generated
6. Now you can flash the generated splash.img via fastboot
Code : fastboot flash splash splash.img
or zip it to flash via twrp ,i will provide the empty zip,just put the generated splash
on zip and flash via TWRP,
Download Link :
https://www.androidfilehost.com/?fid=24665542585483396
Video Tutorial : - just follow the link , i cant wrap the link theres an error
https://youtu.be/t28MWNDrZDg
https://www.youtube.com/watch?v=t28MWNDrZDg
Zip Link:
https://www.androidfilehost.com/?fid=24651430732235650 - This is empty zip with updater script that will work via flashing using TWRP. You can drag your generated splash.img on this zip and flash via TWRP
Credits :
Kalvin Kennon Rasgo
Arvin Quilao
M1cha
Eldrik Escueta Manangkil - for beta Testing
MY page : https://www.facebook.com/djkalvinn.kennon
https://kshenroms.wordpress.com​

Thank you so much for this tool! For a long time I've been trying to change my splash screen.
Really, thank you!

your always welcome brother
Typhus_ said:
Thank you so much for this tool! For a long time I've been trying to change my splash screen.
Really, thank you!
Click to expand...
Click to collapse
your always welcome brother , hope it helps you a lot , i think this will also work for other qualcomm/snapdragon devices

Hi can i use this tool for Mi A2 Lite ?
Thx

kalvin026 said:
Last time i share my Generated Bootlogos
Today i Will share my BootLogo Maker Tool
Kalvin Bootlogo Maker Tool CherryMobile G1 / GeneralMobile 4g / i-mobile IQ II (Seed) (QCOMM)
Instructions :
1. First download the tool from the link provided
2. Extract the installer from the zip,then run it check the license agreement first,
it will run on 32 bit & 64 bit Windows system,
after installation run the ReadMe file,
3. The default location of the folder after installation is
C:\Kalvin BootLogo Maker (SEED)\
,its on you where you want to install the tool
4. After installation go to the folder you will see the application
BootLogo Maker Tool.exe ,put your logo.png in the folder you can drag your logo.png
to BootLogo Maker Tool.exe or you can just run the BootLogo Maker Tool.exe
Dont forget to put your logo.png in the folder,image is not exceeding 200kb
if the image exceeds to 200kb , you have to compress your image first
5. After you Drag the logo .png or you just run the app, the splash.img will be generated
6. Now you can flash the generated splash.img via fastboot
Code : fastboot flash splash splash.img
or zip it to flash via twrp ,i will provide the empty zip,just put the generated splash
on zip and flash via TWRP,
Download Link :
https://www.androidfilehost.com/?fid=24665542585483396
Video Tutorial : - just follow the link , i cant wrap the link theres an error
Zip Link:
https://www.androidfilehost.com/?fid=24651430732235650 - This is empty zip with updater script that will work via flashing using TWRP. You can drag your generated splash.img on this zip and flash via TWRP
Credits :
Kalvin Kennon Rasgo
Arvin Quilao
M1cha
Eldrik Escueta Manangkil - for beta Testing
MY page : https://www.facebook.com/djkalvinn.kennon
https://kshenroms.wordpress.com
Click to expand...
Click to collapse
Can I use this for mi a3??

[BOOT ANIMATION][MARVEL NEW LOGO] for any android device

Heyy Guyss ,Here is the boot animation of Marvel's New Logo ,Just follow my steps ahead
NOTE
I M NOT RESPONSIBLE IF UR PHONE GOES IN BOOTLOOP OR IT GETS BRICKED..
THIS IS NOT A FLASHABLE ZIP SO DON'T TRY TO FLASH IT....FOLLOW MY STEPS TO FLASH IT MANUALLY
STEPS:-
1.Download the zip file
2.Move it to internal storage
3.Download & Install Boot animation app (Jrummy) from play store
4.Select install from local storage
5.select Marvel.zip
6.Click on + button ..& enjoy:laugh:
https://drive.google.com/file/d/0B1TcWYeF3Nj3VTI1MkVPTWJrRlE/view?usp=drivesdk

Resurrection Remix(8.1) GSI Treble Project

Resurrection Remix
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Requirements:
Honor 9i (RNE- L22)
I don't know if this will work on the other variants like RNE-L21, L23.
[/LIST]
[*]Your device MUST have an unlockable bootloader.
[*] Your device MUST be Project Treble compatible. That means your device meets one of the following criteria:
[*] Your device LAUNCHED with Android 8.0 Oreo or a newer version (eg. Android 8.1 Oreo) AND is Google Play certified. (If you rooted your device/flashed another custom ROM and somehow ended up with your device being listed as uncertified in Google Play, then don’t worry. We’re only concerned about the status of the device as it was shipped.)
[*] Your device UPGRADED to Android 8.0 Oreo or a newer version AND was made Project Treble compatible by the manufacturer. See this article for a list of such devices.
[*] For honor 9i(RNE-L22) u need to be in EMUI 8.0 otherwise u wont be able to flash this rom.
[*]
[/LIST]
ROM link - https://mega.nz/#!BDJCBC4Y!doc877HCYLDeZD_xF2Rx0xKxH69YbTcOOBW6FytvCGo
Recovery for EMUI 8.0 - https://mega.nz/#!lGYwFSpZ!5otUYH4q8Vgwm7dmVImHmJmLY9CkPzCWJnjzpggxOi8
Guide How to flash recovery -
Boot into fastboot( Power off> connect to pc> Hold volume down+Power button)
Now extract the recovery zip in desktop
Go to the extracted folder there u will find a folder named data enter the data folder now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot flash recovery_ramdisk recovery.img
(this will flash the twrp in ur system)
type - fastboot reboot.
How to flash GSI system image? -
copy the downloaded rom image file to the extracted recovery folder
now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot -w
(this will wipe everything from your phone so before doing this take backup)
type - fastboot flash system RROS.img
(this will flash the rom)
when flash is finished
type - fastboot reboot.
now press & hold power button + volume up to go to recovery
once u r in twrp select wipe> do normal factory reset(no advance)
then go back twrp home select mount de-select mount partitions read-only and tick every partition
now go back to twrp home select Install> select gapps zip file> swipe to install
after installing gapps do a normal factory reset and reboot
HERE IS THE TRICKY PART
AFTER REBOOTING SYSTEM HUWAIE eRECOVERY WILL ASK TO FORMAT THE DATA PARTITION , DO THAT, AFTER THAT IT MAY AGAIN TAKE YOU TO TWRP DO A SIMPLE FACTORY RESET AND REBOOT SYSTEM
NOW GIVE IT SOME TIME TO BOOT UP
To gain root access in this rom follow this process-
Download the Magisk flashable zip from here- https://mega.nz/#!VTIk2KYb!1GiyvrJsaovscKH2j3Jb2ySPowcxzSy3h--4MaJJv60
Flash this via TWRP and reboot
Then install this magisk manager apk - https://mega.nz/#!ZDQgQAJa!fzi8TjfAxsLTSQYD_zRqdxhUKNSy6ylhX_ZF5tyyGQ8
Open magisk manager
there click on install > select direct install(recomended)
Voila u r rooted now.
Note: all the credit goes to the GSI image developer @phh
A big thanks to @KingofMezi for the recovery.
Please hit the thanks button for me.
XDA:DevDB Information
Resurrection Remix(8.1) GSI Treble Project, ROM for the Honor 9i
Contributors
sknoman1, phh
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Stable
Created 2018-06-21
Last Updated 2018-06-21

sknoman1 said:
Resurrection Remix
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Requirements:
Honor 9i (RNE- L22)
I don't know if this will work on the other variants like RNE-L21, L23.
[/LIST]
[*]Your device MUST have an unlockable bootloader.
[*] Your device MUST be Project Treble compatible. That means your device meets one of the following criteria:
[*] Your device LAUNCHED with Android 8.0 Oreo or a newer version (eg. Android 8.1 Oreo) AND is Google Play certified. (If you rooted your device/flashed another custom ROM and somehow ended up with your device being listed as uncertified in Google Play, then don’t worry. We’re only concerned about the status of the device as it was shipped.)
[*] Your device UPGRADED to Android 8.0 Oreo or a newer version AND was made Project Treble compatible by the manufacturer. See this article for a list of such devices.
[*] For honor 9i(RNE-L22) u need to be in EMUI 8.0 otherwise u wont be able to flash this rom.
[*]
[/LIST]
ROM link - https://mega.nz/#!BDJCBC4Y!doc877HCYLDeZD_xF2Rx0xKxH69YbTcOOBW6FytvCGo
Recovery for EMUI 8.0 - https://mega.nz/#!lGYwFSpZ!5otUYH4q8Vgwm7dmVImHmJmLY9CkPzCWJnjzpggxOi8
Guide How to flash recovery -
Boot into fastboot( Power off> connect to pc> Hold volume down+Power button)
Now extract the recovery zip in desktop
Go to the extracted folder there u will find a folder named data enter the data folder now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot flash recovery_ramdisk recovery.img
(this will flash the twrp in ur system)
type - fastboot reboot.
How to flash GSI system image? -
copy the downloaded rom image file to the extracted recovery folder
now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot -w
(this will wipe everything from your phone so before doing this take backup)
type - fastboot flash system RROS.img
(this will flash the rom)
when flash is finished
type - fastboot reboot.
now press & hold power button + volume up to go to recovery
once u r in twrp select wipe> do normal factory reset(no advance)
then go back twrp home select mount de-select mount partitions read-only and tick every partition
now go back to twrp home select Install> select gapps zip file> swipe to install
after installing gapps do a normal factory reset and reboot
HERE IS THE TRICKY PART
AFTER REBOOTING SYSTEM HUWAIE eRECOVERY WILL ASK TO FORMAT THE DATA PARTITION , DO THAT, AFTER THAT IT MAY AGAIN TAKE YOU TO TWRP DO A SIMPLE FACTORY RESET AND REBOOT SYSTEM
NOW GIVE IT SOME TIME TO BOOT UP
To gain root access in this rom follow this process-
Download the Magisk flashable zip from here- https://mega.nz/#!VTIk2KYb!1GiyvrJsaovscKH2j3Jb2ySPowcxzSy3h--4MaJJv60
Flash this via TWRP and reboot
Then install this magisk manager apk - https://mega.nz/#!ZDQgQAJa!fzi8TjfAxsLTSQYD_zRqdxhUKNSy6ylhX_ZF5tyyGQ8
Open magisk manager
there click on install > select direct install(recomended)
Voila u r rooted now.
Note: all the credit goes to the GSI image developer @phh
A big thanks to @KingofMezi for the recovery.
Please hit the thanks button for me.
XDA:DevDB Information
Resurrection Remix(8.1) GSI Treble Project, ROM for the Honor 9i
Contributors
sknoman1, phh
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Stable
Created 2018-06-21
Last Updated 2018-06-21
Click to expand...
Click to collapse
Your download link is not working. There is an error:
The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user.

Hey guys could you help me with any Android pie gsi ROMs with VOLTE support for my Honor 9i RNE L22? I have been searching a lot but didn't come across any suitable one.

Yureka Black Change Bootanimation

Yureka black phone change boot animaiton . Bootanimation link
Yureka black os Boot Animation:
Yureka Black OS Bootanimaiton
Google Pixel Boot Animation
Google Pixel BootAnimation
StagOS Boot Animation
Stag OS Boot Animation
Titanium Boot Animation
TitaniumBootanimation
LineageOS Boot Animation
Lineage OS Bootanimation
REQUIREMENTS
TWRP or Root explorer
Bootanimation.zip
GUIDE
Yureka Black OS
If you are using yureka black os, click mount via twrp, click system and then click advanced click on file manager and then go to system/system/media section and delete the bootanimation zip file and then discard the bootanimation file you want and reboot. This is only for yureka black os.
Android 11
If you are using android 11 rom, go to file manager via twrp, go to system/system/media section and delete the boot animation zip file from there and throw the new boot animation file.
Android 10
If you are using android 10 rom, go to file manager via twrp, go to system/system/product/media section and delete the boot animation zip file from there and throw the new boot animation file.