What is the best ROM for Z1 - Xperia Z1 Q&A, Help & Troubleshooting

Hello, i have the c6903 and a modded but official 5.01 ROM along with Twin Recovery and Exposed.
The phone works ok until it starts to seriously lag, with icons taking ages to appear on screen (like the HOME screen or APPs screen). Also at points, it fails to recognize any WIFI signals. It is as if there are no signals at all.
The biggest issue is the reboot. In order to restart OS i have to enter recovery and wipe Cache which leads to an approximatelly ~13minutes boot up time.
Now i browsed the ROM section and i've nerver seen so many ROMs available before. It makes it hard to choose which on to install.
I need a rom with Dual Recovery and root. Which is the best offer at the moment with SONY camera software working? I dont care for experimental ROMs but i need something stable, fast and well, fast.
Thanx for reading this.

Hi, installing Xposed Framework will it lead me to bootloops? Was that the cause of my bootloops with the .254(i think) version?

Hi,
First, there is no such thing as "Best ROM", the best to do is search the Development Thread, read some threads, some comments and go for the ROM that interests you. I am running Stock Rooted + Xposed and it has been quite nice to me.
About your question, Xposed is still in alpha version, so maybe it indeed caused bootloops, but latest version has been running fine on my device. I'm running .270 firmware by the way.
All the best,
~Lord

BLiapis said:
Hello, i have the c6903 and a modded but official 5.01 ROM along with Twin Recovery and Exposed.
The phone works ok until it starts to seriously lag, with icons taking ages to appear on screen (like the HOME screen or APPs screen). Also at points, it fails to recognize any WIFI signals. It is as if there are no signals at all.
The biggest issue is the reboot. In order to restart OS i have to enter recovery and wipe Cache which leads to an approximatelly ~13minutes boot up time.
Now i browsed the ROM section and i've nerver seen so many ROMs available before. It makes it hard to choose which on to install.
I need a rom with Dual Recovery and root. Which is the best offer at the moment with SONY camera software working? I dont care for experimental ROMs but i need something stable, fast and well, fast.
Thanx for reading this.
Click to expand...
Click to collapse
I had the same issues as you and I finally found a ROM that is really smooth! However it does not have Sony camera software as it is based on cm12, the ROM is crdroid

Thamx for the reply guys

Related

Which is the proper way to downgrade from cm11 to cm10.2?

I upgraded my p1000 from cm10.2 to cm11 few weeks ago but the latest cm11 seems to be a bit laggish on my device and I'd like to go back to cm10.2, first of all... is it possible? If so, which is the proper way to do it?
mrfree2ita said:
I upgraded my p1000 from cm10.2 to cm11 few weeks ago but the latest cm11 seems to be a bit laggish on my device and I'd like to go back to cm10.2, first of all... is it possible? If so, which is the proper way to do it?
Click to expand...
Click to collapse
I'd recommend you try OmniROM Its what I'm using on my "P1" and although it has its share of problems. Wired Headsets don't seem to be working. Its no more worse then CM10 was, and on that note why CM10.2 which like CM10.1 was broken beyond use? The only decent CM10 was CM10 from 2013 - 02 - 03. Which AFAIK was the last fully working CM10 Mod for the P1000. As the 10.1 and .2 had the Camera Bugs.
In any case Omni is pretty well supported with near nightly, or at the lest every other night updates. As long as you don't get crazy with it with Live Wallpapers, like my Old man was trying to run on it. (He too has a P1000), its pretty damned responsive. But. Again you ONLY have 512MB of RAM on the P1000. In some rear cases even less then this!
In my Fathers case the same sh-- that was causing his CM11 to lag like heck, was the same crap that was making the fresh install of his CM10 (version as dated above!), lag just as bad. So you might want to first clean up such resource hungry Apps as you have first.
But, on the Latest OmniROM for the P1 (Int't GSM version), as of 06.08.14 (Which is still the the most current at the time I wrote this), just running the Google Now Launcher, and a few widgets. The Tablet doesn't feel any considerably slower then it did back in CM10, and the Google Now Launcher is a KEEPER! I can't imagine wanting to roll back to CM10.
P.s. Did you remember to reset your Firmware + wiping the Cache Partition, and Dalvik Cache? This could also partially explain your problems. If you, had not done this.
P.p.s. Download your ROM, and appropriate GAPPs Package, then reboot your P1000 by pressing both the Volume Up, and Power Button till you see the Galaxy Tab / Samsung Bootloader Screen. Then release the Power Button, while continuint to hold the Volume Up till you fully enter the Recovery Mode.
Once in the Recovery Mode do the following Factory Reset, then Wipe Cache Partition and the Dalvik Cache (Advanced Settings). Then install your CM10.x ROM from where you stored it i.e. the /Download Folder? And when thats though. Your GAPPs Package as well. After which you then boot into your new ROM. Which might take a few moments longer, on the first boot as the Database(s)? have to built from scratch again.
Mmmhh I think I'll follow your suggestion and I'll try OmniROM. Have you used the CWM recovery or the TWRP suggested on their official wiki to flash the omnirom?
mrfree2ita said:
Mmmhh I think I'll follow your suggestion and I'll try OmniROM. Have you used the CWM recovery or the TWRP suggested on their official wiki to flash the omnirom?
Click to expand...
Click to collapse
The way I described it before was for CWM. OmniROM uses TWRP. The ideas the same, in fact its a bit simpler on TWRP, in as far as it simplifies the wipe progress. Just One TIP download and install SuperSU, and run it. Once your rooted, go into your System Settings and click on the SuperSu Setting, (near the bottom), and it should ask you if you want to use a backup script, to keep root! You should run this if you want to... Need to keep Root for say AdAway. As OmniRom does NOT ship out with Root... WHY?! I can't say.
Other then that the only other annoying things I dislike about this ROM is that I have to keep uninstalling the Apollo Player. as well as reinstalling the Xposed Installer reset the "ro.config.low_ram" from true, to false, to re-enable transparencies, as well as other Lock Screen Widgets. After each update. Which again averages about every other day. I use something called ROM Toolbox Lite to do this, as trying to do this manually I always seem to gimp my install to a point of bootlooping.
But, other then these little niggles I actually like this ROM! for the most part.
And we should discourage question thread in development forum.
Sent from my GT-N7100 using XDA Free mobile app

Problem with lockup / display not turning on across various roms, rooted droid

I successfully rooted my droid (that came with lollipop), using this guide
https://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
installed twrp backed up the stock OS and installed resurrection remix lollipop rom. I did not install any different modems or radios as I planned to stay on lollipop.
Everything worked great yet after a day or two the display/phone would appear to lock up. I can press power, the display doesn't come on and when (usually) moving the the volume up/down I do hear sounds. Sometimes at this point it will reboot by itself, other times I have to reboot it.
When it comes up it goes through the android is upgrading thing, and sometimes works fine after, sometimes not, regardless eventually this problem repeats.
Thinking it was perhaps RR I tried straight Cyanogenmod, and eventually the rooted stock OS, both have this same problem.
I've tried using it with very minimal installed in the way of apps, same issue.
I've tried saving the log to SD to peer at later, but going through it I don't really see anything obvious to show what the problem is.
I"m wondering if there's a problem with the phone itself (it's a refurb) and am considering unrooting it and returning it.
Anyone seen this or thoughts on what might be the issue?
p.s.
if you happen to have a good link handy to an unrooting guide you might shoot it my way thanks.
thanks in advance!
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
There are ways to grab logs after a reboot, but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
thanks for the reply
ChazzMatt said:
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
Click to expand...
Click to collapse
I tried the last released CM lollipop snapshot, as well as the last nightly.
For RR it was last released, "ROM OS Version: 5.1.x Lollipop"
ChazzMatt said:
There are ways to grab logs after a reboot,
Click to expand...
Click to collapse
Yeh I've been saving it to the SD so I can view it after a reboot, I've looked at 4 or 5 of them after the problem occurred and at least to me nothing really stood out
ChazzMatt said:
but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
Click to expand...
Click to collapse
Yeh I expect it might periodically need a reboot but if it's just unpredictiably locking up or rebooting on its own it's not very usable.
I think I'm just going to have to try to unroot and return, maybe I'll go with a LG V20 as I don't want to have pay to re-root another one of these and possibly have same issue. Also the whole pay to have some app do something secret to my phone does leave me a bit uneasy.
Kind of a bummer as I'm actually pretty impressed with this device, fast, good battery, takes nice photos, only drawbacks for me are no removable SD and lack of LED notification, but I was willing to live without those given how good everything else was.
thanks
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Android Version: 7.1.2
Current Rom: AOKP
Kernel: 3.10.107-Stock-bhb27-nougat-kerneL
MrN00b said:
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Click to expand...
Click to collapse
FWIW and in case it helps you or someone else, I seem to have fixed mine finally, here's what I did.
First I installed latest twrp (mod 4) https://androidfilehost.com/?w=files&flid=39562 (there's a thread on this twrp if you want tor read on it). That in itself didn't fix the issue but did finally let me format and got rid of an 'mkfs.f2fs: invalid option -- r, ERROR=1' type error I used to get.
I installed this stock zip from twrp as described in thread:
https://forum.xda-developers.com/droid-turbo/development/rom-su4tl-49-100-stock-t3390041
It would never actually boot it would shut my phone off not long after showing the boot screen, and I'm not sure if doing that was necessary or not.
Taking some suggestions from here:
https://forum.xda-developers.com/droid-turbo/help/help-request-custom-rom-phone-unlocked-t3767070
I dug up the last official CM 13 snapshot:
https://www.google.com/search?q=cm-13.0-20161221-SNAPSHOT-ZNH5YAO3Y5-quark.zip
sha1: 9a219dd487c27e51b0c5c4922812838f394099c5
Wipe and installed with no gapps and voilà it would boot consistently. Without reinstalling I tried installing pico gapps and it would still boot though it took maybe 15 mins initially.
I want Nougat so I wiped and installed lineage-14.1-20180612-UNOFFICIAL-quark.zip from https://forum.xda-developers.com/moto-maxx/development/rom-t3494646 again no gapps and it also booted fine, whereas previously it would hang on booting. Without reinstalling ROM I tried installing opengapps nano and it would just hang.
I could then no longer get it to boot again, so I reinstalled CM13 no gapps, which booted fine, wipe and install lineage-14.1-20180612-UNOFFICIAL-quark.zip no gapps, and now it boots fine though currently it's taking a while.
I should perhaps note I took twrp backups inbetween steps whenever I had a working boot, (ex before installing gapps), but once the phone went back to hanging on boot, those restores didn't help. Only reflashing CM13 seemed to clear things up.
My ultimate goal is a LOS ish Nougat/Oreo ROM with no gapps using microg, and running tmobile, I'll see what I end up with.

Zenfone Go Oreo help

Hi someone with an account on 4dpa with 30 posts could please download this rom and share it here? I don't know Russian so it's impossible for me to write 30 posts.
I have a Zenfone Go (Z00VD) and the stock ROM it's terrible (crash in the camera, 1 Gigabyte of app space already full....)
In case you can't, could you provide an alternative ROM with as less bugs as possible?
Thank you
Original Thread 4pda
Translated Google
Guess we're on the same boat buddy. Have you tried the other ROMs on their forum like the nougat ones? They seem nice.
I personally prefer to use the RR 5.5.9 lollipop rom provided by 4pda since for some reason the nougat and marshmallow roms on their site just give me bootloops. It may be different for you though.
JustAnormalGuy said:
Guess we're on the same boat buddy. Have you tried the other ROMs on their forum like the nougat ones? They seem nice.
I personally prefer to use the RR 5.5.9 lollipop rom provided by 4pda since for some reason the nougat and marshmallow roms on their site just give me bootloops. It may be different for you though.
Click to expand...
Click to collapse
Hi, not yet, it's not my phone so I'm searching a stable ROM. I saw the nougat thread here but it's not very clear what works and what not, there seems to be a nougat rom on 4dpa which should work well except the videocamera with the stock app, but the Oreo one seems almost bug free although more complex to install. Unfortunately I can't access it.
Hello,
From what I can tell, both Oreo and Nougat ROMs were unstable and/or sluggish for me, so I'd recommend to stick to Marshmallow based ROMs(for now). My personal preference is ResRemix 5.7.4, but if you decide to try any of them, keep in mind that ROMs with kernel 3.18.19(as far as I've seen most of ROMs in that thread) all have these two issues that I was able to find so far:
Notification LED doesn't work
Bluetooth audio doesn't work either
Other than that, the ROM is super-stable and somehow better than 5.1.1 ROMs from official dev thread there.
And for JustAnormalGuy, bootloops in later ROMs seem to happen because of unwiped internal storage(basicly needs entire /data partition wiped somewhy). Try marking the 'Internal SD' option when wiping partitions for ROM installing.
Good luck!
aurismat said:
Hello,
From what I can tell, both Oreo and Nougat ROMs were unstable and/or sluggish for me, so I'd recommend to stick to Marshmallow based ROMs(for now). My personal preference is ResRemix 5.7.4, but if you decide to try any of them, keep in mind that ROMs with kernel 3.18.19(as far as I've seen most of ROMs in that thread) all have these two issues that I was able to find so far:
Notification LED doesn't work
Bluetooth audio doesn't work either
Other than that, the ROM is super-stable and somehow better than 5.1.1 ROMs from official dev thread there.
And for JustAnormalGuy, bootloops in later ROMs seem to happen because of unwiped internal storage(basicly needs entire /data partition wiped somewhy). Try marking the 'Internal SD' option when wiping partitions for ROM installing.
Good luck!
Click to expand...
Click to collapse
Those 2 bugs are not a deal breaker for me, would you mind linking to the ResRemix 5.7.4 rom that you used?
Sure, buut since I can't post links(thanks XDA for 10 post restriction, love ya!), I'll have to send one another way.
PM me your Discord handle(if you have one) or something else. I should be able to send you the link there.
aurismat, and what version of twrp do you use ?
I use TWRP 3.0 by Jemmini. It's been a *long* time since I installed it though, so if you have something different, I'm afraid I won't be of much help unless I'll be able to pull my recovery .img file.
Actually, i use the same version. Problem is most probably my method of root. The common method of rooting for our device didn't include any flashing with sp flash tool. But for my situation, my bootloader is locked even after downgrading. So i did the other method (also found on the forum) in which includes flashing.
Hmm, it *may* be the root method, may be also the locked bootloader.
If I recall right(and this might be THE common way), I used the fastboot method from XDA, and I knew it'd work cause I rooted more phones that way. I remember downgrading the stock ROM down to version 39(i think that one still had the bootloader check in dev options) and then trying to unlock the bootloader and obviously go through flashing the recovery image.
Dunno what might be the issue with your way of flashing, though. AFAIK might be anything from leftover files to bootloader giving the finger.
@aurismat i think the problem might be that i used the "format all + download" option on sp flash tool. Does that affect the phone in any way that deprives my phone from using 6.0 - 7.0 roms? (Besides the "null" imei effect)
@JustAnormalGuy I don't think it should be a problem, because the ROM .zips install their own stuff to the partitions AFAIK, so even if Flashtool wipes everything, it should still be fine. Try doing one of them ROMs(previously said ResRemix worked for me), but remember to wipe the Internal Storage partition if you can.
Oh and remember to take a backup of your current ROM, should it bootloop again at least you won't have to do the hassle of reinstalling everything back(learned that the hard eay haha).
EDIT: was it just Nougat ROMs that you were trying or was it both Nougat and Marshmallow? Not sure what might be the cause, but the ROMs developed under the same kernel from ska-vova in 4PDA worked for me. Just a thought.
well actually i already tried various roms from Marshmallow to Nougat all of which gave me bootloops. I've already followed the steps of installation as written. However, i tried once installing a Marshmallow rom from the facebook group named "ASUS Zenfone Go Indonesia" and it surpisingly worked for me (numerous bugs present however), as well as most of the marshmallow (and only marshamallow roms) on their group.
The thing is I also might think one of the reasons why i get the bootloops in the roms from the 4pda forum is the kernel used in them. (just speculation) Should it be correct to assume that ?
As I recall:
Working rom shows "kernel version > [email protected]"
Not working rom - "kernel version > [email protected]"
Hmm, I'm using [email protected] kernel version 3.18.19.
All the ROMs there seem to be by mosly nik-kst's kernel. ska-vova seems to just build ROMs with the kernel.
Besides, take note from the working ROM - it's also from 4PDA.
Only thing I can speculate is that your device is somewhat different(maybe different hardware, not sure) and hence why it gives you BLs.
Dunno, this case is a tough cookie to be honest - only thing I can recommend at this point is to flash literally EVERYTHING back to stock and try using fastboot method to get recovery and root back.
Hey @Darkorn,
Over the span of a few days, I've tried installing 4PDA's Oreo ROM.
It took me a good couple of headaches to make out what translated Russian meant in the instructions, but I've managed to repartition the entire device to the guide.
Seems to work properly so far, hell even Bluetooth and Notification LED issues from older ROMs seem to be fixed!
Though one thing that annoys me *personally* is that it's impossible to install SuperSU, so you're stuck with Magisk. It's not the end of the world, though, as long as you don't care about SafetyNet's BS.
Oh and @JustAnormalGuy, try repartitioning your device according to the Oreo instructions in 4PDA, that might be the solution for ya.
If I ever get up to 10 posts I'll ask those guys permission to let me post the tutorial here with all the links(hopefully).
Until then, good luck to both of ya!
aurismat said:
Hey @Darkorn,
Over the span of a few days, I've tried installing 4PDA's Oreo ROM.
It took me a good couple of headaches to make out what translated Russian meant in the instructions, but I've managed to repartition the entire device to the guide.
Seems to work properly so far, hell even Bluetooth and Notification LED issues from older ROMs seem to be fixed!
Though one thing that annoys me *personally* is that it's impossible to install SuperSU, so you're stuck with Magisk. It's not the end of the world, though, as long as you don't care about SafetyNet's BS.
Oh and @JustAnormalGuy, try repartitioning your device according to the Oreo instructions in 4PDA, that might be the solution for ya.
If I ever get up to 10 posts I'll ask those guys permission to let me post the tutorial here with all the links(hopefully).
Until then, good luck to both of ya!
Click to expand...
Click to collapse
Nice! Resurrection Remix is working too well to bother, but who knows in a few months!
That would be great man, thanks !!

[Discussion] Resurrection Remix 7 for Hammerhead (Android 9 Pie)

Hello everyone. I am opening this thread for the sake of convenience of us users of this ROM so that we stop hijacking the Oreo version thread and have a "clean" place where we can discuss about our experience with this great ROM. So I suggest anything regarding this ROM to be posted here!
You can find the official builds here: https://get.resurrectionremix.com/?dir=hammerhead
DISCLAIMER: I am by no means a developer or maintainer of this ROM, so this cannot be considered an official support thread, just conversation, plain and simple! Moderators can close this thread as soon as an official support thread opens.
Cheers!
I just installed the rom,came from stock. My first impressions are:
-It took 2 reboots to get the camera working. Installed google camera app since the integrated one doesnt show up on app drawer(you can access it from lockscreen though) and it seems to work kinda bad(picture goes black on it sometimes).
-It runs a bit hotter than stock rom. It might be just me though,I have opened the phone a few times to fix the power button which seems to get stuck for me once in a while.
-The default DPI doesn't seem right,everything looks a little bit smaller than it does on stock rom. There is an option to change it though, I set mine to 380 and it looks about right.
I haven't found any other issues yet.
Another note,I think the rom fixed my notification led lol. It didn't work for me on stock rom for some reason.
Pretty good rom overall,I haven't faced any stability issues yet.
edit: Is there any way to lower the resolution?
I upgraded from RR's Oreo build. Before flashing I repartitioned the phone using the method described here and the even more detailed instructions posted by douguluskaien on page 12 of that thread. The flash went very smoothly and although the phone initially ran hot it cooled back to normal after a few hours of what was probably background processing. With the 1.5G system partition I was able to install the micro version of GAPPS. I've had that experience after flashing new ROMs on other phones as well. I also discovered the bundled camera doesn't work and installed Google Camera. After starting up Google Camera, the original camera worked also. I tried connecting bluetooth headphones, and even though I could pair the headset I couldn't get the phone to send audio - it just kept playing through the phone speaker. I also found the default font size a little small, but changing it to Large in the Font Size menu got it back to what seems like normal.
I have one major issue which I realize is not directly related to the ROM. A custom version of TWRP is required to support the non-standard partitions, and that version is based on TWRP 3.2.3 and doesn't support device encryption. Does anyone know if an updated TWRP will be available that will allow me to encrypt the phone and still do recovery-related stuff?
In summary, this is impressively well along for a build that's only been live for a couple of weeks. This isn't my daily driver so I don't need absolute stability, so this is plenty for me for now. I just won't leave the house with it until I can encrypt.
I've been using this ROM for about a month now as a daily driver, so here's my feedback:
ROM is very nice and smooth and feature rich (as expected for RR). I installed it with Opengapps nano, rooted with Magisk. It works very well with the Pixel launcher I grabbed from here.
Some drawbacks I noticed:
Battery life is rather bad. I get 1h30m SOT at best with very mild usage (mostly site browsing and a little bit of social apps and YT video watching) . Then again I am still using the 5yr old battery that came with the phone...
The phone runs very hot (too hot to hold!) after using it for some time. It cools down rather fast if you let it be for a while, though.
Sometimes the camera is crashing (the notorious "can't connect to camera" error). usually a reboot fixes this.
Sometimes it takes a while for the device to wake up after pressing the power button.
I got some soft reboots under device heavy load. Mostly I get them when using the Rocket player music app, and it tries to load a large music folder. Phone freezes, then soft reboots.
SElinux is set to permissive and the build is signed with test keys. Maybe the first thing is caused by the latter, I don't know really....
Overall, it is a good ROM with room for improvement. However, I am concerned about its maintenance status. No update since May 14, so I keep my fingers crossed.
New build (28/07) uploaded!
hammerheadache said:
New build (28/07) uploaded!
Click to expand...
Click to collapse
I am not able to install it giving me ERROR 7
hammerheadache said:
New build (28/07) uploaded!
Click to expand...
Click to collapse
Do you know about change log??
What features added?
I want to update it tonight
As I state at the first post, I am not a developer, neither I have any involvement in this project and the people behind it. So I can't provide any support apart from my experience as a user.
sacmat said:
I am not able to install it giving me ERROR 7
Click to expand...
Click to collapse
I didn't flash this build so I don't know if it works or not. I have switched to a different ROM. However, could you elaborate? Do you come from another ROM? Did you dirty flash? Is your device repartitioned? Usually error 7 in TWRP means there's not enough system space...
m.morcielago said:
Do you know about change log??
What features added?
I want to update it tonight
Click to expand...
Click to collapse
I do not see any changelog file on the download page. Unfortunately with no official support thread, there are no official answers as well...
I flashed this build this morning by dirty way
Unfortunately Bluetooth is not working
It can find the other devices but can not connect to them
1- How can I fix it?
2-How can I downgrade to previous build?
hammerheadache said:
As I state at the first post, I am not a developer, neither I have any involvement in this project and the people behind it. So I can't provide any support apart from my experience as a user.
I didn't flash this build so I don't know if it works or not. I have switched to a different ROM. However, could you elaborate? Do you come from another ROM? Did you dirty flash? Is your device repartitioned? Usually error 7 in TWRP means there's not enough system space...
I do not see any changelog file on the download page. Unfortunately with no official support thread, there are no official answers as well...
Click to expand...
Click to collapse
Thanks for the idea, I had just repartitioned, so I had format my entire phone, (before that i had taken the backup ), and I had successfully installed the rom, I got an strange issue of WIFI connectivity, as I am not able to connect to my wifi which is having Hidden SSID, but i am successfully connected with the hotspot from my another primary phone. i haven't tested the bluetooth yet.
I dirty flashed the new build this morning. Haven't tried bluetooth or camera yet, but Wifi is working fine. As usual, the phone heated up for about a half hour after the flash and then the temp dropped and stabilized. Battery life is not great, like the May build, and there is often a long delay responding to the power button, especially shortly after power-up, but the build seems pretty solid.
Casting isn't finding anything to cast to in the most recent build. Camera worked fine.
New build available (Aug 4) as seen at ROM's dl page.
Bluetooth pairing now working for me on last release
Hi installed this ROM in clean maner but i got intermitent issue with sim card. Not sure if it is only sim issue or reboot but phone ask my pin code.
Looks like @voidz777 is the maintainer for RR Pie as well:
https://github.com/ResurrectionRemix-Devices/api/commit/8388c5df5069cf04df04facbdc22a2bfd8890185
New build (09/08) in case someone missed it... Link in OP
sacmat said:
I am not able to install it giving me ERROR 7
Click to expand...
Click to collapse
okay so to fix this you will have to repartition your system.
This thread will help you. https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Repartitioning is the fix to error 70 while flashing gapps as well as error 7.
New build (Sep 16) available! Link in OP.
princeknockouts said:
okay so to fix this you will have to repartition your system.
This thread will help you. https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Repartitioning is the fix to error 70 while flashing gapps as well as error 7.
Click to expand...
Click to collapse
Thank you for the tip, I followed the thread and was able to install RR 7 without any trouble. This might not be the right place to ask, but would you have any info on how to install SuperSU on RR 7, or is there perhaps another root method that we must use? Thanks in advance, I can't seem to find information on it anywhere and rather than continuing to bang my head against the wall I thought I'd ask.

Just ordered razer phone 2 looking for custom os instructions.

So from what i gathered TWRP doesnt work yet on the razer phone 2 and lineage os doesnt have a build for this phone yet i gotta ask what is available for modding razer and what is the step by step to make that happen. i seen some instructions but other than root there isnt much to do.
SynGreis said:
So from what i gathered TWRP doesnt work yet on the razer phone 2 and lineage os doesnt have a build for this phone yet i gotta ask what is available for modding razer and what is the step by step to make that happen. i seen some instructions but other than root there isnt much to do.
Click to expand...
Click to collapse
TWRP works just fine on this device. It's installed when you fastboot flash arter97 kernel and it works perfect. He just updated it to r10. Good luck!!
Edit: as far as ROMs look around in this forum you'll find a couple of different ones in the same section as arter97 :good:
which one do you suggest? i dont see much of a selection.
SynGreis said:
which one do you suggest? i dont see much of a selection.
Click to expand...
Click to collapse
Right now there really aren't any, although there are a few in development, such as AOSP. I think the initial high price, specialized hardware & relative unpopularity has not helped attract any serious development.
I've noticed that ROM development has decreased significantly in the last few years. I remember the days of the Samsung Galaxy Nexus & the HTC Evo 4G where it seemed as if there was a new ROM released every week. I think its because (a) recent Android operating systems are offering greater customization out of the box, & (b) with the new A/B partitioning scheme, it makes ROM development more difficult.
Cancel your order. Get your money back. This phone while it is awesome at gaming and has a great screen. The OS is ****ty to say the least. I have had more issues with it freezing up. Not wanting to download apps from the play store. Not allowing me to install apps that I have already downloaded on my device. Now it's showing up as the Asus Rog II. This phone is the biggest heaviest piece of **** I've ever had. I promise you if everyone knew the issues this phone has you couldn't give it away free.
mattwheat said:
Cancel your order. Get your money back. This phone while it is awesome at gaming and has a great screen. The OS is ****ty to say the least. I have had more issues with it freezing up. Not wanting to download apps from the play store. Not allowing me to install apps that I have already downloaded on my device. Now it's showing up as the Asus Rog II. This phone is the biggest heaviest piece of **** I've ever had. I promise you if everyone knew the issues this phone has you couldn't give it away free.
Click to expand...
Click to collapse
Mine showed as in rog 2 the last time I reloaded the OS. It's because it searches for "phone 2" and randomly guesses. No biggie, just fix it in the settings. No issues here from playstore, if you do it's common on every Android phone and fixable by clearing the data from the app. Maybe you should reflash the stock firmware? I don't see why you would call this phone ****ty. It's basically running AOSP stock except some theming from Razer. I fixed some freezing issues by reseating the Sim and SD card that I have. This thing rocks, just saying.
I've cleared the play stores cache, data, and dalvic in every method imaginable. Even google play services. I've restored backups, flashed stock .imgs, and flashed the stock odex Ron and the deodexed rom. It doesn't start failing to install play store apps till after I initially install most the apps I normally use then a while later when I think of one I forgot I'll go and try to install. That's when it starts messing up. If I watch a video threw some websites built in player on the webpage I'm viewing... about 15 to 20 seconds into the video everything but sound freezes. And will not correct itself. I have to hold the power button till it reboots. Only videos I can watch without issue is from the YouTube app. It's ridiculous. I've unlocked, rooted, and crack flashed tons of roms on all of my pixel and Nexus devices without any issue besides the random freeze. Which can be quickly fixed by toggling the screen on and off. This **** is ridiculous. So over this phone.
matt that might be just you i havent experienced any issues with this phone whatsoever.
"I think its because (a) recent Android operating systems are offering greater customization out of the box, & (b) with the new A/B partitioning scheme, it makes ROM development more difficult."
can you provide more info on this A/B partition? id love to see what customizable stuff i can do with this.
mattwheat said:
I've cleared the play stores cache, data, and dalvic in every method imaginable. Even google play services. I've restored backups, flashed stock .imgs, and flashed the stock odex Ron and the deodexed rom. It doesn't start failing to install play store apps till after I initially install most the apps I normally use then a while later when I think of one I forgot I'll go and try to install. That's when it starts messing up. If I watch a video threw some websites built in player on the webpage I'm viewing... about 15 to 20 seconds into the video everything but sound freezes. And will not correct itself. I have to hold the power button till it reboots. Only videos I can watch without issue is from the YouTube app. It's ridiculous. I've unlocked, rooted, and crack flashed tons of roms on all of my pixel and Nexus devices without any issue besides the random freeze. Which can be quickly fixed by toggling the screen on and off. This **** is ridiculous. So over this phone.
Click to expand...
Click to collapse
The freezing is due to a bug in Google Chrome. All you have to do to fix this issue is roll back the app version to 72 because version 76 doesn't work on our RP2.
Edit: uncheck auto update
Only freeze I had so far was with the infamous switch switch to the tele lens. Not a single other issue with software.
Other question, if you put the display at 120hz, and you scroll something, does it 'feel' like your finger sticks to text/icons?
I mean, is there no delay like you normally would have at 60hz?
On the Oneplus 7 Pro the 90hz is already a big improvement (less delay) but 120 should really be kickass... anyone?
MasterThiefGarrett said:
Other question, if you put the display at 120hz, and you scroll something, does it 'feel' like your finger sticks to text/icons?
I mean, is there no delay like you normally would have at 60hz?
On the Oneplus 7 Pro the 90hz is already a big improvement (less delay) but 120 should really be kickass... anyone?
Click to expand...
Click to collapse
Take this with a grain of salt, as I just got the RP2, but its the most responsive, "sticky" feeling Android phone I've used. 120hz is like night and day to me.
On a related note, Firefox Fenix with webrender enabled feels significantly more responsive than Chromium atm, as it seemingly renders the whole page instead of stuttering as you scroll like Chrome.
JDBarlow said:
TWRP works just fine on this device. It's installed when you fastboot flash arter97 kernel and it works perfect. He just updated it to r10. Good luck!!
Edit: as far as ROMs look around in this forum you'll find a couple of different ones in the same section as arter97 :good:
Click to expand...
Click to collapse
how can you get twrp in? Everytime i try to flash twrp in i get stuck at powered by android logo.
SynGreis said:
how can you get twrp in? Everytime i try to flash twrp in i get stuck at powered by android logo.
Click to expand...
Click to collapse
Which version of Android are you running currently?
MR1 will be arter97 r11
MR2 will be arter97 r12
http://arter97.com/browse/aura/kernel/
duplicate post
JDBarlow said:
Which version of Android are you running currently?
MR1 will be arter97 r11
MR2 will be arter97 r12
http://arter97.com/browse/aura/kernel/
Click to expand...
Click to collapse
i havent flashed either of those arter because im worried that its gonna screw things up again.
Im sitting on the 9.0 MR1 stock image from razer.
https://developer.razer.com/razer-ph...actory-images/
SynGreis said:
i havent flashed either of those arter because im worried that its gonna screw things up again.
Im sitting on the 9.0 MR1 stock image from razer.
https://developer.razer.com/razer-ph...actory-images/
Click to expand...
Click to collapse
So are you on the global version? If so let it update to MR2 and fastboot flash boot arter97 r12 and you'll be just fine.
Which version are you running then to get stuck on boot logo?
Edit: if you want to stay on MR1 then flash arter97 r11
i tried updating to mr2 but says installation failed.
all i do is
faatboot flash boot kernal.img?
I just rooted MR2 to show you. It took me less than 5 minutes to do the whole process of fastboot flashing kernel booting straight into TWRP recovery which is included then installing magisk immediately rebooting into system and updated magisk. Done
JDBarlow said:
I just rooted MR2 to show you. It took me less than 5 minutes to do the whole process of fastboot flashing kernel booting straight into TWRP recovery which is included then installing magisk immediately rebooting into system and updated magisk. Done
Click to expand...
Click to collapse
My only question is, which version zip of magisk did you use in TWRP to flash? 20 or the latest beta? I'm rooted now with a modded boot.img that someone else used the canary/latest beta. Just don't want to screw myself and end up having to flash mr1 again then taking the update.

Categories

Resources