Database Develop

Can't flash to stock. Data wipe failed after flashing with odin one click

Hi, everybody. I have a big problem with my Captivate I897. I bought it on ebay and it appears to be bricked. Just AT&T logo loop.
I have tried a lot of stuf - flashing with odin one click, installing different roms with odin, removing all data in recovery mode. Nothing helps.
Messages that have experienced:
After flashing to stock with odin-one-click: Data wipe failed
After installing custom rom (I897UCJI6-OCD-REV02-Low-designgears_1_.exe): Can't mount SDCARD: copy default media content failed
Removing data in recovery mode completes without errors but nothing changes.
This phone is locked to AT&T, maybe this is the trouble.
I can go to Download mode and recovery mode.
Maybe something wrong with internal sd card. Maybe i can do some hard format or something like that.
Could anybody help?
Thanks

Guys, anybody? i'll appreciate any hints. Please.

I would suggest trying to flash to stock with a non-One-Click Odin version. It's possible that the One-click version doesn't have the right instruction set to get around whatever is causing the issue on the phone (or maybe it just doesn't like the phone).
You could also try this Heimdall-based One-Click to get back to stock. It's possible that ODIN might be incompatible with your current setup.
If that still doesn't work, and you're not averse to trying your hand at soldering, you could give the Unbrickable Mod a try and see if you can go from there.
If you have any questions along the way, just post back here.

I would try flashing I897UCJF6_final_OCD_REV0.zip . That one works great for me every time and it is a one click. You'll find it in DG's stock rom thread in the development section.

I've helped a few people out with their Cappy's and I've noticed that some of the newer ones (model number 1010 and above) don't take too kindly to stock 2.1. You might want to check that. It's written behind the battery.
Have you tried i897UCKB1 (2.2) or maybe even i897UCKH3 (2.3.4)?

Thank all of you for advice. I will try out all that you advised me to.
I found model number it is 1007.
Cheers.

[Q] Phone keeps rebooting to recovery

Hello!
I'm new to posting to this forum, so you can call me a noob. I'm sure I am a noob, I'm sure I did something wrong. I was just a customer for the time when GingerDX development started for Xperia X8, my previous phone. I'm not a dev, but I know know to flash stuff and what to avoid or do with care. If this thread is in the wrong section, then sorry, please move it where it should be.
Three months ago I got my new shiny GT-I9305, version for Poland (distributed by Plus), and as I did with my X8 previously, I decided to root it and dive into flashing many custom ROMs.
I made the EFS backup following lyriquidperfection's thread (http://forum.xda-developers.com/showthread.php?t=1946915), so my IMEI and NV items are safe and secure. I also did a backup of a stock 4.1.2 ROM.
I was using many different ROMs and kernels from XDA, both based on CM10.1 and Official Samsung ROM. I had PhilZ Touch 5 recovery installed. Everything worked fine, until I noticed something strange:
After I flashed an unofficial port of SlimBean to I9305 (http://forum.xda-developers.com/showthread.php?t=2297679), and Yank555 kernel for CM10.1 based ROMs, I noticed that in "About phone" section, my phone is shown as "GT-I9300", but I'm 100% sure I flashed the file that had I9305 in the filename, so it couldn't be my mistake. I didn't buy I9305 for 4G, but for 2 GBs of RAM, so I couldn't test if LTE was working (My carrier is T-Mobile.pl, which doesn't have 4G in Poland yet), but I didn't see the option to even search for LTE networks available. I didn't care much about that, since everything else was working just fine.
I decided to flash the previous ROM I was using - Sentinel Rom, because I found the bug with GPS and I wanted to see if the same happens in that rom. I rebooted to recovery, but... I couldn't install the package. It was all giving the "set_perm some changes failed (status 7)" error all the time. The same happened when I tried to install LiquidSmooth for i9305. I just couldn't flash any 4.2.2 ROM, I was able to flash a kernel just fine.
I decided to flash Ripper Rom instead. It installed with no error, it just said: "Root access is missing, root the device?" so I simply said to root it. But the phone couldn't normally boot. It stayed for a while at the "Samsung Galaxy SIII GT-I9305" splash screen with the little red exclamation mark in the top left corner, then it kept rebooting back to recovery. I had no idea what's going on. Wiping data/cache/dalvik cache/system didn't help at all. The only way to make the phone working again was to recover SlimBean from Nandroid backup I had done previously. Sadly, I had no Sentinel Rom backup. Deleted it. Shame on me.
I successfully restored Stock 4.1.2 rom from the nandroid backup, but I still couldn't install any custom ROM via recovery because of the same error.
After several tries to install different ROMs, redownloading everything and going through a lot of stress I gave up. I installed TriangleAway, reset the flash counter and, through Odin, flashed tar.md5 of the stock ROM delivered by Plus, downloaded from here: http://goo.gl/SMWEha. I installed a version build XXBLL3, which later updated itself to XXBMB4, and baseband updated from XXBLL3 to XXBMA2.
Right now, I have Official, Stock 4.1.2 ROM from Plus, with Baseband version I9305XXBMA2, build number JZO54K.I9305XXBMB4 and stock kernel.
What Download mode says:
Product Name: GT-I9305
Custom binary download: No
Current Binary: Samsung Official
System Status: Official
Now to the questions:
Why this started happening? Was the reason the wrong model of the phone in "About phone", hence installing SlimBean?
When I flashed the stock ROM, does it mean that I'm fully back to stock, with everything removed? Does it mean that my phone is like I got it from the box, with warranty? The recovery seems stock as well.
Can I root it again? If yes, how to do it safely, to not make something like that happen again?
Baseband got updated. Does it mean I have to make an EFS partition backup again?
Sorry if I ask too much, but I'm a very careful person, and I want to know everything before I start doing anything risky with my smartphone.
Thanks in advance.

General thread read the basics all stickied .
jje

I read every sticky thread and I can't find the answer to my questions. That's why I'm asking.

When I flashed the stock ROM, does it mean that I'm fully back to stock, with everything removed? Does it mean that my phone is like I got it from the box, with warranty? The recovery seems stock as well.
That is answered in the how to return to stock for warranty thread .
Root again yes follow the instructions .
EFS again that is in the faqs and guides no you dont have to but its safer to do so .
Why this started happening >>> User error who knows where as multiple roms stuff flashed .
jje

I rooted the phone again using the Galaxy S3 toolkit and every time I try to install the custom ROM through TWRP I get the error:
set_perm: some changes failed (status 7)
Then the phone doesn't want to boot (reboots to recovery all the time), only a restore of a Stock 4.1.2 from nandroid backup helps.
Ideas?

Seriously? Anyone?
Flashing 4.1.2 ROM (Ripper Rom) gives the same exact effect. Rom flashes correctly, but the phone cannot boot into system, reboots to recovery.

[Q] I messed up the RADIO on my i8190L and now stuck in bootloop

Let's start with a little background as to how I got into this mess
- I had a perfectly working i8190L running SlimBean 4.3 from Maclaw (and I should've left it alone since its the wife's phone)
- I wanted to try out the new SlimKat 4.4 (http://get.novafusion.pl/?id=955)
- After a clean flash of slimkat, the new ROM was running fine after I completed setup EXCEPT baseband was 'xxxx'
- I rebooted into recovery and flashed GT-I8190_modem.bin-XXAMJ3-update2.zip because it was in my sdcard. I thought flashing a new radio would change the baseband except now I'm stuck in a bootloop with NO ABILITY TO BOOT TO RECOVERY!!!!
- I can only boot into Download mode, so I can still ODIN flash the system
Can someone suggest how/if I can fix this? I'm just kicking myself for turning a fully working phone into a brick with my wife breathing down my shoulders
my working setup was TWRP 2.7, SlimBean 4.3 and I had no idea which radio the i8190L came with default
I created a nandroid before all this mess, but I just need a way to get back into Recovery

You downloaded the wrong modem file. You need the one for the I8190L, but you flashed one for the I8190.
Sent from Tapatalk on my GT-I8190 running Novafusion's Carbon 4.4.2

chan1628 said:
Let's start with a little background as to how I got into this mess
- I had a perfectly working i8190L running SlimBean 4.3 from Maclaw (and I should've left it alone since its the wife's phone)
- I wanted to try out the new SlimKat 4.4 (http://get.novafusion.pl/?id=955)
- After a clean flash of slimkat, the new ROM was running fine after I completed setup EXCEPT baseband was 'xxxx'
- I rebooted into recovery and flashed GT-I8190_modem.bin-XXAMJ3-update2.zip because it was in my sdcard. I thought flashing a new radio would change the baseband except now I'm stuck in a bootloop with NO ABILITY TO BOOT TO RECOVERY!!!!
- I can only boot into Download mode, so I can still ODIN flash the system
Can someone suggest how/if I can fix this? I'm just kicking myself for turning a fully working phone into a brick with my wife breathing down my shoulders
my working setup was TWRP 2.7, SlimBean 4.3 and I had no idea which radio the i8190L came with default
I created a nandroid before all this mess, but I just need a way to get back into Recovery
Click to expand...
Click to collapse
Sorry but you are going to sleep on the couch tonight I suggest this:
You must download the original rom from SamMobile, install it through Odin and then install again through Odin the Recovery and through Recovery your "old" new Rom. When you are in the new Recovery check for the nandroid backup that you made . If it isnt there look for the couch because the phone is with the "old" new Rom without any of the past data.
Btw if you want you can upgrade your baseband from here:http://forum.xda-developers.com/showthread.php?t=2526831
Good luck

No recovery at all or bootloop in recovery as well?
Sent through time and space from my s3mini/CM11

chan1628 said:
Let's start with a little background as to how I got into this mess
- I had a perfectly working i8190L running SlimBean 4.3 from Maclaw (and I should've left it alone since its the wife's phone)
- I wanted to try out the new SlimKat 4.4 (http://get.novafusion.pl/?id=955)
- After a clean flash of slimkat, the new ROM was running fine after I completed setup EXCEPT baseband was 'xxxx'
- I rebooted into recovery and flashed GT-I8190_modem.bin-XXAMJ3-update2.zip because it was in my sdcard. I thought flashing a new radio would change the baseband except now I'm stuck in a bootloop with NO ABILITY TO BOOT TO RECOVERY!!!!
- I can only boot into Download mode, so I can still ODIN flash the system
Can someone suggest how/if I can fix this? I'm just kicking myself for turning a fully working phone into a brick with my wife breathing down my shoulders
my working setup was TWRP 2.7, SlimBean 4.3 and I had no idea which radio the i8190L came with default
I created a nandroid before all this mess, but I just need a way to get back into Recovery
Click to expand...
Click to collapse
Don't bother trying to flash it if nothing happens, drain the battery, return to seller and get replacement. I got free replacement from Amazon with my bricked rooted S3 mini.

jstath1972 said:
Sorry but you are going to sleep on the couch tonight I suggest this:
You must download the original rom from SamMobile, install it through Odin and then install again through Odin the Recovery and through Recovery your "old" new Rom. When you are in the new Recovery check for the nandroid backup that you made . If it isnt there look for the couch because the phone is with the "old" new Rom without any of the past data.
Btw if you want you can upgrade your baseband from here:http://forum.xda-developers.com/showthread.php?t=2526831
Good luck
Click to expand...
Click to collapse
just to clarify... what is consider "the original rom from SamMobile"? There are plenty of versions and country codes to choose from... I just wanted to make sure I'm downloading the correct one.... i've done enough of using the wrong files already

KoolKid98189 said:
Don't bother trying to flash it if nothing happens, drain the battery, return to seller and get replacement. I got free replacement from Amazon with my bricked rooted S3 mini.
Click to expand...
Click to collapse
its not going to be that easy for me... i've had this phone for almost 2yrs already
tys0n said:
No recovery at all or bootloop in recovery as well?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
no recovery at all... it bootloops if i power on normally

chan1628 said:
just to clarify... what is consider "the original rom from SamMobile"? There are plenty of versions and country codes to choose from... I just wanted to make sure I'm downloading the correct one.... i've done enough of using the wrong files already
Click to expand...
Click to collapse
It depends on what country you're in and if the phone is locked to any specific carrier.
If it's not locked then I believe any i8190L firmware will do, just to get the phone running again.

chan1628 said:
its not going to be that easy for me... i've had this phone for almost 2yrs already
no recovery at all... it bootloops if i power on normally
Click to expand...
Click to collapse
It was a tough decision for me, it was either stick to a ****ty BlackBerry or get a free replacement and sacrifice the data. Some of it should be synced to your Google account

tys0n said:
It depends on what country you're in and if the phone is locked to any specific carrier.
If it's not locked then I believe any i8190L firmware will do, just to get the phone running again.
Click to expand...
Click to collapse
ok, i will give all this a try and hope for the best
thanks everyone for the quick responses :good:

You could also try to reflash just recovery thru Odin and see if it works.
Sent through time and space from my s3mini/CM11

chan1628 said:
just to clarify... what is consider "the original rom from SamMobile"? There are plenty of versions and country codes to choose from... I just wanted to make sure I'm downloading the correct one.... i've done enough of using the wrong files already
Click to expand...
Click to collapse
You are in Canada but the L version is for the Latin America countries. So the firmware must be from one of that countries. Which one i can't tell you. You should ask your seller.

[problem solved]
Ok, I was able to restore the phone with /u/jstath1972's suggestion
1. I went to http://www.sammobile.com/firmwares/ and downloaded the latest 'L' firmware
2. I used ODIN to flash the firmware
3. the phone REBOOTED!!!
(once the phone rebooted, the rest was easy)
4. powered off and ODIN flashed the lastest TWRP
5. powered off and booted into recovery
6. RESTORED NANDROID so wife would stop giving me the look
7. updated baseband as suggested: http://forum.xda-developers.com/show....php?t=2526831
THANK YOU THANK YOU :good:
side note: i wish my work was this effective in resolving technical issues (just my 2 cents)

chan1628 said:
Ok, I was able to restore the phone with /u/jstath1972's suggestion
1. I went to http://www.sammobile.com/firmwares/ and downloaded the latest 'L' firmware
2. I used ODIN to flash the firmware
3. the phone REBOOTED!!!
(once the phone rebooted, the rest was easy)
4. powered off and ODIN flashed the lastest TWRP
5. powered off and booted into recovery
6. RESTORED NANDROID so wife would stop giving me the look
7. updated baseband as suggested: http://forum.xda-developers.com/show....php?t=2526831
THANK YOU THANK YOU :good:
side note: i wish my work was this effective in resolving technical issues (just my 2 cents)
Click to expand...
Click to collapse
Good sleep tonight, my friend ! :good:

Aye Aye Aye, I CAN NOT get the finger print scanner to work...+

Long story shorter. Phone stolen. Phone had nandroid stored on my computer. Phone replaced by another Note 4 (PS, thief go pound sand). Didn't mess around, stock rom to Note 4 (ANK). Root. Recovery. Old image from lost phone used as recovery. (Yeah I didn't make a backup of original from new phone). Flashed over. Everything works fine. Now ready to put finger prints in. Error page pops up saying fingerprint scanner error. 72 hours of scouring this forum, internet, MULTIPLE stock rom flashes from the oldest to NJK to ANK and COG6. Clean flash, dirty flash NOTHING works. Makes no difference what I do, cannot get the fingerprint scanner to perform. Common problem, complaints all over the internet about it but NO SOLUTIONS. I have tried everything down to deleting directories and I cannot get the damn thing to work. Seriously doubt hardware issue. *#0*# sensor heading shows finger print scanner as Null and 0.0.0.0. Deleted cache. Deleted data from TIBU and now after three days I give up. Seems everyone has the problem but nobody knows why and when they do you get a half assed or worse answer as to how to fix it. Does anybody know how to get this thing working again. Do I need to flash an apk. Where can I find it. Do I need to rebuild. ? Can anyone flash that section fingerprint free and send it to me. I am just guessing. I know crap about how stuff works, I just know how to follow directions but this one has got me stumped.
Any help would be GREATLY APPRECIATED!
Regards,
Freddie did not get fingered but he needs it.

You need to flash stock firmware and verify that all is stock, sometimes after returning to stock you may have a miss matching error like bootloader or modem.
After running stock run smartswitch.
Pp.

PanchoPlanet said:
You need to flash stock firmware and verify that all is stock, sometimes after returning to stock you may have a miss matching error like bootloader or modem.
After running stock run smartswitch.
Pp.
Click to expand...
Click to collapse
Ok forgive me for my ignorance but if I run a stock firmware straight from Sammy shouldn't the bootloader and modem be part of the rom? It seems to me that doing a wipe should be like reinstalling windows, you format the drive and install the OS. There is nothing left and a complete rebuild of the file system occurs. Is this not what happens when you do a wipe in the recovery and then Odin the stock firmware? How can I be sure that when I install a stock rom everything is wiped and there is no hangers and the OS on the phone is rebuilt completely? When you say smartswitch I assume you mean the Sammy program.

jackler1 said:
Ok forgive me for my ignorance but if I run a stock firmware straight from Sammy shouldn't the bootloader and modem be part of the rom? It seems to me that doing a wipe should be like reinstalling windows, you format the drive and install the OS. There is nothing left and a complete rebuild of the file system occurs. Is this not what happens when you do a wipe in the recovery and then Odin the stock firmware? How can I be sure that when I install a stock rom everything is wiped and there is no hangers and the OS on the phone is rebuilt completely? When you say smartswitch I assume you mean the Sammy program.
Click to expand...
Click to collapse
Ok, I think I have found it but now I need to know how to fix it. Currently I have as follows in the about device screen:
Model SN-N910T
AHHA ------!!!!! - ANDROID VERSION 5.0
Baseband - N910TU1ANK4
Kernal version - 3.10.0-2796035 [email protected] #1 Thu Nov 13 18:01:07 KST 2014
Build number - KTU84P.N910TUVU1ANK4
So it seems the android version is wrong. Again forgive my stupidity but what exactly IS the android version. Meaning is that the baseband, the modem, what part of the stock rom is flashed wrong and where do I find that part to flash it correctly. I think I am making some progress just need input. Thanks Pp for getting me on track, now I just need a little shove to get this train rolling and maybe learn something in the process. If I fix it I then intend to write a proper write up for those lost souls out there who don't have to spend days....
So why does it say my android version is 5.0 when it should say 4.4.4?
Thank,
Freddy is getting nervous

First verify what version of the note 4 you have, Sm-N910T or Sm-N910T3 and flash proper firmware. Look under your battery.
Once you root you jumble up the phones ability to install firmware properly, and flashing stock firmware once with odin does not always secure components thus leaving you with unofficial status, "custom" and you think you went back to stock with no root but not official yet.
You need to make sure everything flashes and sticks, Model nunber, Android version, Basedand version, Kernel version, Build number.
Any of the modified components can stick and not be overwritten by stock odin flash.
Sometimes multiple flashes, or individual component flashes are required to go back to "official" stock form.
At this point you can verify that your fingerprint scanner works properly and leave it alone or proceed cautiously if root is really required ??? .
I only run stock and save myself all the headaches, I used to root back when Samsung phones where simple and less complicated without kernel security from Samsung.
I suggest latest 5.1.1 lollipop update, kitkat is primitive and outdated, you will be amazed at how well your note will run with latest firmware (with junk apps disabled).
Pp.

Here's a sample of my stock Note 4 running latest update.
Pp.

PanchoPlanet said:
Here's a sample of my stock Note 4 running latest update.
Pp.
Click to expand...
Click to collapse
Nope, I have wiped this phone a million times, reinstalled factory rom over the top of itself a dozen times, installed the baseband and bootloader separately after that and NOTHING changes it still will not work. I have read the complete internet from front to back and it seems nobody knows but the shadow.....Thanks for taking the time for trying to help me out though...

When you say wipe, do you mean factory reset?
Several resets in a row should wipe it clean. Something is stuck, could be the kernel, that will prevent a clean install.
You need to find a way to wipe partitions individually using ADB on the PC, that should allow for a clean install.
Pp.

jackler1 said:
Long story shorter. Phone stolen. Phone had nandroid stored on my computer. Phone replaced by another Note 4 (PS, thief go pound sand). Didn't mess around, stock rom to Note 4 (ANK). Root. Recovery. Old image from lost phone used as recovery. (Yeah I didn't make a backup of original from new phone). Flashed over. Everything works fine. Now ready to put finger prints in. Error page pops up saying fingerprint scanner error. 72 hours of scouring this forum, internet, MULTIPLE stock rom flashes from the oldest to NJK to ANK and COG6. Clean flash, dirty flash NOTHING works. Makes no difference what I do, cannot get the fingerprint scanner to perform. Common problem, complaints all over the internet about it but NO SOLUTIONS. I have tried everything down to deleting directories and I cannot get the damn thing to work. Seriously doubt hardware issue. *#0*# sensor heading shows finger print scanner as Null and 0.0.0.0. Deleted cache. Deleted data from TIBU and now after three days I give up. Seems everyone has the problem but nobody knows why and when they do you get a half assed or worse answer as to how to fix it. Does anybody know how to get this thing working again. Do I need to flash an apk. Where can I find it. Do I need to rebuild. ? Can anyone flash that section fingerprint free and send it to me. I am just guessing. I know crap about how stuff works, I just know how to follow directions but this one has got me stumped.
Any help would be GREATLY APPRECIATED!
Regards,
Freddie did not get fingered but he needs it.
Click to expand...
Click to collapse
try doing this...
1st - run chainfire triangle away v3.26
2nd - boot into recovery and wipe everything 3 times except external sdcard.. especially data...
3rd - boot in download mode and ODIN whatever firmware u wanna use... 2 times...
happened to me when the note 4 first came out... I had to exchange to a new note 4...
also whenever u do a nandroid.. U MUST REMOVE ANY SAVED FINGERPRINTS... so u can use that backup again..
if u restore a nandroid with a saved frintprints, it won't work, u must delete data and start fresh..
I don't know if u messed it up by restoring a nandroid from a previous phone and with saved fingerprints stored...

will do thanks for the advice will advise

Nope, nothing I do including stock or otherwise works. When you hit +#0*# it says null and 0.0.0.0 unless someone knows something I don't, it's borked. The thing is even if I used a nandroid and it overwrote my fingerprints where the ones in the nandroid so you would think it would work. Chalk it up to who knows....thanks anyway. Still looking if anyone finds solution....

Bootloader fails in Odin, not sure what went wrong

Hello I'm not really that good with mobile tech so excuse my noobness but i decided to dive in and try to root my samsung s6. Here is step by step what i've done so far
Following a few tuts after backups i rooted my phone and verified it with root checker.
Next I downloaded a few popular root apps and removed a bunch of bloatware on the phone
Today I decided to try to install a custom ROM for my phone, after finding a suitable one for my model I proceeded with his guide:
http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-0-t3094423
Next I downloaded all the correct files (I'm confident I double checked)
Now I'm not sure if this is where I went wrong but I installed TWRP custom recovery first
Then I proceeded to install modem with Odin and that went fine it passed and phone restarted
But when I go to install bootloader under BL in Odin it just fails, tried 3 times same result
Can anyone suggest another step in troubleshooting this? If it helps I was running stock samsung os never tinkered with the phone before this
Any advice is appreciated and please let me know if there is any more info i can provide
Thanks
EDIT:
Ok so I posted this late last night after trying to figure it out for a while. This morning I left for work to discover I had no mobile capabilities at all. No data, call, text nothing. Last night I was connected to my wifi at home so I guess I didn't notice. This has been obviously brutal with no communication all day. I tried tinkering a bit with it (did a factory reset through TWRP, tried flashing everything through TWRP) and nothing really helped.
Now I'm not really sure how to proceed so any advice would help as I don't want to brick my phone. What I'm planning on doing next that is the only thing that makes sense to me (again I have very little experience with phones) is to:
1. Re-flash everything through TWRP
2. Re-flash using stock rom, stock bl, and stock modem using Odin
My questions are is there any particular order I need to do this in and also will I have to re-root the phone again after or will this just be the stock rom but still rooted?
Thanks again literally ANY ideas u can throw out here go a long way as I've opened myself a can of worms