Related
while attempting root on my sprint moto x using the moto x tool kit I decided hey the verizon root might work since theyre both cdma. bad idea. now every time i turn on my phone. com.android.phone force closes and it tells me sim card error. ive already flashed the stock image and I still get the error. any help would be greatly appreciated. thank you.
I attempted the slapmymoto method in the motoxtool kit and selected verizon
bradsinram said:
I attempted the slapmymoto method in the motoxtool kit and selected verizon
Click to expand...
Click to collapse
not sure what you did at all because all the phones are rooted the same way.
i would download the 4.2.2 firmware here
http://sbf.droid-developers.org/download.php?device=0&file=18
then go to this guide
http://forum.xda-developers.com/showthread.php?t=2603358
and follow the guide for returning to stock.
then after you are stock decide if you want to unlock your bootloader or not. then pick the guide based on what you decide and follow it for root
dray_jr said:
not sure what you did at all because all the phones are rooted the same way.
i would download the 4.2.2 firmware here
http://sbf.droid-developers.org/download.php?device=0&file=18
then go to this guide
http://forum.xda-developers.com/showthread.php?t=2603358
and follow the guide for returning to stock.
then after you are stock decide if you want to unlock your bootloader or not. then pick the guide based on what you decide and follow it for root
Click to expand...
Click to collapse
I've my device is 4.4 and ive already returned to stock and am still having the issue?
bradsinram said:
I've my device is 4.4 and ive already returned to stock and am still having the issue?
Click to expand...
Click to collapse
ok but if you did it threw the toolkit you might of still returned to the stock firmware for a different device
i restored completely to stock and am still having the same issue. please help
bradsinram said:
i restored completely to stock and am still having the same issue. please help
Click to expand...
Click to collapse
im going to bump this in hopes someone else takes a look.
can you look under settings/About phone/Status
what dose it way for
Network
signal strength
Mobile netowork type
also do you have a valid imei/meid please dont post this number here just check the number there with the number on the side of the box the phone came in
dray_jr said:
im going to bump this in hopes someone else takes a look.
can you look under settings/About phone/Status
what dose it way for
Network
signal strength
Mobile netowork type
also do you have a valid imei/meid please dont post this number here just check the number there with the number on the side of the box the phone came in
Click to expand...
Click to collapse
it says sprint for network then com.android.phone force closes. then it switches to searching for service. it say no signal strength and mobile network type is unknown. but it seriosuly force closes ever 2 seconds.
bradsinram said:
it says sprint for network then com.android.phone force closes. then it switches to searching for service. it say no signal strength and mobile network type is unknown. but it seriosuly force closes ever 2 seconds.
Click to expand...
Click to collapse
if it keeps force closing then you are not returning the phone to stock. because if you did that would not happen.
so i need you to explain to me what you are using when returning your phone to stock because it is not taking for some reason.
dray_jr said:
if it keeps force closing then you are not returning the phone to stock. because if you did that would not happen.
so i need you to explain to me what you are using when returning your phone to stock because it is not taking for some reason.
Click to expand...
Click to collapse
im using the 4.4 file that the motox toolkit downloads then i extract it to my adb folder and run these commands
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
everything appears to sucessfully flash
bradsinram said:
im using the 4.4 file that the motox toolkit downloads then i extract it to my adb folder and run these commands
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
everything appears to sucessfully flash
Click to expand...
Click to collapse
so what your now telling me 3-4 post later is that you did not listen to me at all so you asked for help and when i gave you the correct answer on what to do you did not listen.
so i will try this one more time the 4.4 firmware package you keep using from the Moto x toolkit is not the Sprint firmware so STOP using it and download the firmware from the link below. and flash it with the above commands like i told you to do in my first post
http://sbf.droid-developers.org/download.php?device=0&file=734
dray_jr said:
so what your now telling me 3-4 post later is that you did not listen to me at all so you asked for help and when i gave you the correct answer on what to do you did not listen.
so i will try this one more time the 4.4 firmware package you keep using from the Moto x toolkit is not the Sprint firmware so STOP using it and download the firmware from the link below. and flash it with the above commands like i told you to do in my first post
http://sbf.droid-developers.org/download.php?device=0&file=734
Click to expand...
Click to collapse
okay I will do. so i just find it weird they have an almost identical name and both say sprint. but thank you and im download the one you provided now.
dray_jr said:
so what your now telling me 3-4 post later is that you did not listen to me at all so you asked for help and when i gave you the correct answer on what to do you did not listen.
so i will try this one more time the 4.4 firmware package you keep using from the Moto x toolkit is not the Sprint firmware so STOP using it and download the firmware from the link below. and flash it with the above commands like i told you to do in my first post
http://sbf.droid-developers.org/download.php?device=0&file=734
Click to expand...
Click to collapse
so ive used the file you provided me with and am still having the same exact issues. I appreciate your help.
I feel like i need to rewrite the radio partition but which I'm assumung is the NON-HLOS but every time i try to write to it i get permission denied
ok sorry i left out a command i think i know what is going on
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
i know you just did this but do it one more time and make sure you do the erase userdata and cache commands and then reboot.
after wiping everything i am not sure what would be wrong i have a sprint device and i have never had this issue.
dray_jr said:
ok sorry i left out a command i think i know what is going on
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
i know you just did this but do it one more time and make sure you do the erase userdata and cache commands and then reboot.
after wiping everything i am not sure what would be wrong i have a sprint device and i have never had this issue.
Click to expand...
Click to collapse
yeah I've tried it about ten times now and i think theres something else from the verizon root that mustve gotten flashed and is causing this
Well you have to flash the NON-HLOS.bin or it is not going to work.
Why not just download the full Sprint firmware file(I believe you've already done this) download rsdlite, remove the var line from the xml, and with one click your phone will work fine again.
Steve-x said:
Well you have to flash the NON-HLOS.bin or it is not going to work.
Why not just download the full Sprint firmware file(I believe you've already done this) download rsdlite, remove the var line from the xml, and with one click your phone will work fine again.
Click to expand...
Click to collapse
Thank you so much! I was wondering what kept causing rsd lite to fail. Im lead technician at a spring store and could just AE it but really dont want a refurb, especially since this phone is two days old
sorry but how do I remove the var line?
ive got it figured out thank you for your help
So one of my buddies took the OTA update for 4.4.2 while being rooted on 4.4 with TWRP as his recovery. Now he is stuck in an endless bootloop. Any idea what we could do to bring his phone back to life?
By the way, he is on Sprint and has his bootloader unlocked
Any advice would help!
Thanks.
AbstractXart said:
So one of my buddies took the OTA update for 4.4.2 while being rooted on 4.4 with TWRP as his recovery. Now he is stuck in an endless bootloop. Any idea what we could do to bring his phone back to life?
By the way, he is on Sprint and has his bootloader unlocked
Any advice would help!
Thanks.
Click to expand...
Click to collapse
This happened to me too.
Just flash the latest firmware for your device at http://sbf.droid-developers.org/phone.php?device=0
Then accept the OTA.
Re-install TWRP.
Hope this works for you too.
patspdaphone said:
This happened to me too.
Just flash the latest firmware for your device at http://sbf.droid-developers.org/phone.php?device=0
Then accept the OTA.
Re-install TWRP.
Hope this works for you too.
Click to expand...
Click to collapse
So to accept the OTA, did you go through the bootloader/recovery and flash it, or were you able to turn on your phone and accept it? Sorry I don't have his phone on me right now otherwise I would have done it .
Don't flash the full SBF..
boot the phone into fastboot mode... mfastboot erase cache... the reboot the phone. that will remove the OTA zip file from chache and stop the boot loop.
The bootloop is because the phone has TWRP on it rather than stock recovery.
To take the OTA properly, use mfastboot to reflash stock recovery only. Also have him undo any hacks that might have touched system files or the OTA will fail, (mfastboot system will also get /system back to normal)...
KidJoe said:
Don't flash the full SBF..
boot the phone into fastboot mode... mfastboot erase cache... the reboot the phone. that will remove the OTA zip file from chache and stop the boot loop.
The bootloop is because the phone has TWRP on it rather than stock recovery.
To take the OTA properly, use mfastboot to reflash stock recovery only. Also have him undo any hacks that might have touched system files or the OTA will fail, (mfastboot system will also get /system back to normal)...
Click to expand...
Click to collapse
We actually just ended up clearing the system cache and that seemed to do the trick .
I incredibly appreciate all the info! If anyone makes this silly mistake, all you need to do is clear the cache and everything works as intended.
AbstractXart said:
We actually just ended up clearing the system cache and that seemed to do the trick .
I incredibly appreciate all the info! If anyone makes this silly mistake, all you need to do is clear the cache and everything works as intended.
Click to expand...
Click to collapse
until the next time the OTA downloads and tries to install
I am having this very same problem. My phone just today went into boot loop. Running KangKat on unlocked 1053 with Faux kernel. No boot logo or anything. The phone just vibrates then after 30 seconds or so, it vibrates again. It does this non-stop.
I can plug my phone into USB and the phone's contents come up on my computer, but I can't get the screen to turn on!! Any ideas?
Globalrebel said:
I am having this very same problem. My phone just today went into boot loop. Running KangKat on unlocked 1053 with Faux kernel. No boot logo or anything. The phone just vibrates then after 30 seconds or so, it vibrates again. It does this non-stop.
I can plug my phone into USB and the phone's contents come up on my computer, but I can't get the screen to turn on!! Any ideas?
Click to expand...
Click to collapse
KangKat wtih Faux kernel? So you are not running the stock rom? I'm suprised the actually OTA installed.
I don't know anything about that rom, or kernel to begin to tell you how to fix this situation, short of reflashing your rom
KidJoe said:
KangKat wtih Faux kernel? So you are not running the stock rom? I'm suprised the actually OTA installed.
I don't know anything about that rom, or kernel to begin to tell you how to fix this situation, short of reflashing your rom
Click to expand...
Click to collapse
He probably flashed the "Flashable 4.4.2 ZIP" that is flashable through TWRP.
@Globalrebel :
You need to try to get into bootloader (AP Fastboot) mode. Try holding the VOL DOWN while the phone reboots (vibrates). Make sure the phone is unplugged from USB. If you can access fastboot, your best best would probably to flash the entire SBF back to stock.
Always check here first before you do something like trying to flash a stock update on a custom rom. We would have quickly informed you that this is ill-advised.
Good Luck
Ok, so I have held down the power button, and then when vibrating starts, I hold down vol down button. Then, it vibrates 2 times. What now? (Sorry, I'm freaked out as this is my only phones )
How can i check to see if it is actually in Fastboot mode? Since my screen doesn't show ANYTHING at all?
I started up an ADB server and connected my phone and tried "adb devices" but my phone isn't listed.
---------- Post added at 08:49 AM ---------- Previous post was at 08:40 AM ----------
samwathegreat said:
He probably flashed the "Flashable 4.4.2 ZIP" that is flashable through TWRP.
@Globalrebel :
You need to try to get into bootloader (AP Fastboot) mode. Try holding the VOL DOWN while the phone reboots (vibrates). Make sure the phone is unplugged from USB. If you can access fastboot, your best best would probably to flash the entire SBF back to stock.
Always check here first before you do something like trying to flash a stock update on a custom rom. We would have quickly informed you that this is ill-advised.
Good Luck
Click to expand...
Click to collapse
any ideas?
I just checked device manager and it shows "ADB Interface" and then MOT Single ADB Interface.
But its not showing up under devices when running command "ADB Devices" in CMD
Globalrebel said:
Ok, so I have held down the power button, and then when vibrating starts, I hold down vol down button. Then, it vibrates 2 times. What now? (Sorry, I'm freaked out as this is my only phones )
How can i check to see if it is actually in Fastboot mode? Since my screen doesn't show ANYTHING at all?
I started up an ADB server and connected my phone and tried "adb devices" but my phone isn't listed.
---------- Post added at 08:49 AM ---------- Previous post was at 08:40 AM ----------
any ideas?
Click to expand...
Click to collapse
Fastboot getvar all
If you get a response with that, proceed with the entire Sbf manual method as listed in the return to stock thread.
samwathegreat said:
Fastboot getvar all
If you get a response with that, proceed with the entire Sbf manual method as listed in the return to stock thread.
Click to expand...
Click to collapse
I got it to show some info after running the command. Now, I have the following guide open . .
[GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
But I don't see anything in RSDLite after running it and clicking "Show Device"
Can I just to the manual method?
For manual method, should I copy all the files into the same folder as my mfastboot.exe?
Globalrebel said:
I got it to show some info after running the command. Now, I have the following guide open . .
[GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
But I don't see anything in RSDLite after running it and clicking "Show Device"
Can I just to the manual method?
For manual method, should I copy all the files into the same folder as my mfastboot.exe?
Click to expand...
Click to collapse
Yes,I suggested manual method in last post. Faster and easier.
Yes extract the sbf to the folder containing mfastboot and fastboot.
The only thing you will do differently is one of the last lines that says carrier vzw, change it to carrier sprint.
Make sure u are using the 4.4.2 sprint sbf.
Good luck
samwathegreat said:
Yes,I suggested manual method in last post. Faster and easier.
Yes extract the sbf to the folder containing mfastboot and fastboot.
The only thing you will do differently is one of the last lines that says carrier vzw, change it to carrier sprint.
Make sure u are using the 4.4.2 sprint sbf.
Good luck
Click to expand...
Click to collapse
I am using Tmobile so I put tmo
But, after doing EVERYTHING, the phone reboots and I see it in PC, but screen is still not working?!?!?!
I did everything...
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier tmo
fastboot oem fb_mode_clear
then
fastboot reboot
The phone boots and the phone is seen by my computer, but the screen is not working AT ALL
No water damage, and the phone was literally working perfectly fine 15 minutes ago. Just all of a sudden stopped showing the screen
Globalrebel said:
I am using Tmobile so I put tmo
But, after doing EVERYTHING, the phone reboots and I see it in PC, but screen is still not working?!?!?!
I did everything...
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier tmo
fastboot oem fb_mode_clear
then
fastboot reboot
The phone boots and the phone is seen by my computer, but the screen is not working AT ALL
Click to expand...
Click to collapse
Bummer. You appear to have used the correct procedure.
This looks to be a hardware failure :/
Sorry, I don't have any further troubleshooting techniques for you...
Its all good. I think the screen just decided to die on me?!?! Which REALLY SUCKS! I'm still in my 1 year warranty policy. After fastbooting the original 4.4.2, will motorola know I did anything to the phone? IE, can they know I flashed anything?
Globalrebel said:
Its all good. I think the screen just decided to die on me?!?! Which REALLY SUCKS! I'm still in my 1 year warranty policy. After fastbooting the original 4.4.2, will motorola know I did anything to the phone? IE, can they know I flashed anything?
Click to expand...
Click to collapse
If you unlocked the bootloader they know it. Technically your warranty is void... But they might replace/fix it anyways. Don't mention it and see what happens. Let us know.
Hello need help tracking down stock turbo firmware. The Motofirmware website (http://motofirmware.center/files/category/23-droid-turbo/downloads) are corrupted. The links in this thread are all dead: http://forum.xda-developers.com/moto-maxx/general/quark-stock-firmware-moto-maxx-droid-t3063470. Does anyone know of another source for stock 5.1?
http://motofirmware.center/
Stanleywinthrop said:
Hello need help tracking down stock turbo firmware. Does anyone know of another source for stock 5.1?
Click to expand...
Click to collapse
Here is the file download link for the latest xt1254 droid turbo 5.1 lollipop firmware:
https://www.androidfilehost.com/?fid=24052804347843637
Thanks, jala, but if you had bothered to fully read you'd see that the files on that website are corrupted.
jalal-jap said:
http://motofirmware.center/
Click to expand...
Click to collapse
Thanks, classic, i'll give this a try.
classic757 said:
Here is the file download link for the latest xt1254 droid turbo 5.1 lollipop firmware:
https://www.androidfilehost.com/?fid=24052804347843637
Click to expand...
Click to collapse
Stanleywinthrop said:
Thanks, classic, i'll give this a try.
Click to expand...
Click to collapse
No problem. Please let me know how it turns out.
Stanleywinthrop said:
Thanks, jala, but if you had bothered to fully read you'd see that the files on that website are corrupted.
Click to expand...
Click to collapse
i have same problem. extract it whit "7ZIP" and no corrupted for me.
http://www.rootjunkysdl.com/getdown...o/Firmware/VRZ_XT1254_SU4TL-44_44_CFC.xml.zip -> Full firmware (not OTA) of the most recent version of 5.1
TheSt33v said:
http://www.rootjunkysdl.com/getdown...o/Firmware/VRZ_XT1254_SU4TL-44_44_CFC.xml.zip -> Full firmware (not OTA) of the most recent version of 5.1
Click to expand...
Click to collapse
I get this error:
http://i.imgur.com/EOPsxnB.png
dmginc said:
I get this error:
http://i.imgur.com/EOPsxnB.png
Click to expand...
Click to collapse
Are you using RSDlite? If so, you're getting this error (I think) because the PRODUCT_CONFIGURATION.xml file has instructions for other phone models besides the Turbo in it. If I remember correctly, I got around this by deleting the info for everything not labeled QUARK_VERIZON in this file. However, since RSDlite basically just automates fastboot, a better option is to use fastboot to flash this firmware, in my opinion.
If you decide to flash the firmware this way, place all of the files from the full firmware into the directory that you installed fastboot, and enter the following commands after your phone is plugged into your computer in bootloader mode:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
<repeat until all sparsechunks are flashed>
fastboot erase ddr
fastboot erase cache
fastboot erase userdata (NOTE: this command effectively performs a factory reset, and will erase all of your data)
Then boot, and you will have done everything that RSDlite would have done.
Oh thanks. Good info. Is there a write up on using fastboot anywhere? These forums are pretty poorly maintained and no good stickies anywhere
Edit: Oh, you edited your post. Awesome. Thanks.
The root junky fxz is that for rsd lite when I look at the contents the system image is in several sections and says system.img sparsechunk and has 10 sections. I have never seen this in an fxz. Is this a new way of flashing the system image.
TheSt33v said:
Are you using RSDlite? If so, you're getting this error (I think) because the PRODUCT_CONFIGURATION.xml file has instructions for other phone models besides the Turbo in it. If I remember correctly, I got around this by deleting the info for everything not labeled QUARK_VERIZON in this file. However, since RSDlite basically just automates fastboot, a better option is to use fastboot to flash this firmware, in my opinion.
If you decide to flash the firmware this way, place all of the files from the full firmware into the directory that you installed fastboot, and enter the following commands after your phone is plugged into your computer in bootloader mode:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
<repeat until all sparsechunks are flashed>
fastboot erase ddr
fastboot erase cache
fastboot erase userdata (NOTE: this command effectively performs a factory reset, and will erase all of your data)
Then boot, and you will have done everything that RSDlite would have done.
Click to expand...
Click to collapse
Is it possible for me to relock my bootloader using adb fastboot? I don't want to do it accidentally while messing around with different roms and wiping my way back to stock.
When in fastboot, type "fastboot oem lock" (without the quotations"
Btrusa said:
When in fastboot, type "fastboot oem lock" (without the quotations"
Click to expand...
Click to collapse
Wouldn't that lock the bootloader?
Is it even possible to re-lock?
From what I understand he wants to avoid locking the bootloader...
Edit: nevermind I looked it up... Should have just done that the first time... ("I have seen quite of few people screw up their devices by not knowing what they are doing. So I am making this thread to simply tell people not familiar with fastboot what they should and should not do.
Fastboot oem unlock will unlock your bootloader and do a complete wipe of your device. As far as I know the only way for something to go wrong here is if you're device is low on battery and shuts off during the process. Either plug it in or have a "good" amount of juice left in your battery. To be 100 percent sure plug it in.
Before I get into oem lock IMHO you should only use this command for one thing only. Getting the device ready to send into motorola for the LGT upgrade or a another warranty repair or some sort. When done properly it is completely safe but there is no reason to do to go back to "stock".
Fastboot oem lock. Do not issue this command unless you are absolutely sure you have the correct software on your device. The correct software is what you get from the motodev site for your device. You need the official sofware images for your specific device AND REGION. If it is not released then DO NOT re-lock the device. If you have a OTA installed you will need to flash back to the motodev images first.")
dmginc said:
Is it possible for me to relock my bootloader using adb fastboot? I don't want to do it accidentally while messing around with different roms and wiping my way back to stock.
Click to expand...
Click to collapse
Nope
So is the fastboot flash motoboot bootloader.img just the Motorola "M" splash screen?
Sent from my XT1254 using Tapatalk
dmginc said:
So is the fastboot flash motoboot bootloader.img just the Motorola "M" splash screen?
Click to expand...
Click to collapse
No, that is the actual bootloader. The code that manages device startup, takes fastboot commands, and prohibits unsigned images from booting (when locked).
The splash screen is flashed with:
fastboot flash logo logo.bin
unhappybirthday said:
No, that is the actual bootloader. The code that manages device startup, takes fastboot commands, and prohibits unsigned images from booting (when locked).
The splash screen is flashed with:
fastboot flash logo logo.bin
Click to expand...
Click to collapse
So, back to my original question. When flashing back to stock with adb, but wanting to keep my bootloader unlocked, what should I do?
dmginc said:
So, back to my original question. When flashing back to stock with adb, but wanting to keep my bootloader unlocked, what should I do?
Click to expand...
Click to collapse
I can only speak from my experience. I was on the KitKat bootloader and used mofo to flash lollipop. I unlocked with sunshine and installed twrp. Then I flashed the lollipop bootloader with the fastboot command . Still unlocked.
Sent from my DROID Turbo using Tapatalk.
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
If your phone is defined in the device manager as COM port 9008, you can restore it according to this instruction.
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
The file 'blank-flash.bat' can be taken in the folder "mbm-ci", the cat will be in the unpacked firmware.
https://mirrors.lolinet.com/firmware/moto/chef/official/RETAIL/fastboot_chef_oem_user_9_PPT29.74-25_64be_release-keys-cid50_oem.tar.gz
After installing this file, the phone will be able to boot into fastboot.
After that, you can restore the phone by flashing the same downloaded firmware using the method described here.
https://web.telegram.org/#/[email protected]
[1:27:03 PM]
smyaknti.tar.gz
:
admin
Set your device in fastboot mode do the following and skip the
fastboot -w
step if you don't want to format everything :
fastboot oem fb_mode_set
fastboot -w
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
(If you have more or less sparsechunk files then continue or terminate beforehand accorfingly)
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot oem fb_mode_clear
fastboot reboot
Just yesterday, I so restored my phone from a brick, obtained after installing an unofficial TWRP and firmware RR.
Good luck.
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This is the January Patch Stock ROM
NitrodiumSK said:
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
Click to expand...
Click to collapse
You did not "Brick" your device per se. Probably some improper file was flashed. If you have not wiped your phone, you can just simple try to fastboot flash the stock boot image. It may solve the issue. If not then do a clean flash to either the stock ROM or any custom ROM from this AFH link.
Note that the Custom ROMs are still in beta due to a VoLTE issue and thus are not released on XDA Dev DB yet. They are safe to flash though and are stable if you do not need VoLTE.
You can also ask for more help at the official telegram channel for the device.
smyaknti said:
You did not "Brick" your device per se. Probably some improper file was flashed. If you have not wiped your phone, you can just simple try to fastboot flash the stock boot image. It may solve the issue. If not then do a clean flash to either the stock ROM or any custom ROM from this AFH link.
Note that the Custom ROMs are still in beta due to a VoLTE issue and thus are not released on XDA Dev DB yet. They are safe to flash though and are stable if you do not need VoLTE.
You can also ask for more help at the official telegram channel for the device.
Click to expand...
Click to collapse
I thank you very much for your help. I was able to successfully flash the stock firmware from the link you provided. I only have a small question. The stock ROM zip, is it updated after every security patch OTA update?
NitrodiumSK said:
I thank you very much for your help. I was able to successfully flash the stock firmware from the link you provided. I only have a small question. The stock ROM zip, is it updated after every security patch OTA update?
Click to expand...
Click to collapse
Yes, the complete firmware file is different with every new build released. You can install OTA with the current fastboot flashed stock ROM but provided it has to be "FULLY STOCK". Else the update will fail.
smyaknti said:
Yes, the complete firmware file is different with every new build released. You can install OTA with the current fastboot flashed stock ROM but provided it has to be "FULLY STOCK". Else the update will fail.
Click to expand...
Click to collapse
Alright gotcha! Thanks a lot for your help
Hello dear Mates!
I purchased a cellphone yesterday Motorola Power One. its working fine, but I want to ask n know two things,
1. It has unlocked "bootloader" and on all restart it says to relock it to secure it. If I relock it, will still work or stop working?
2. It has Android 8.1.0 SKU XT1942-1 BUILD NUMBER OPT28.81-45 When I click update it shows Your Device is up-to-date
Android version 8.1.0
Current Version OPT28.81-45
Security Patch level September 1, 2018
But today I saw this update
XT1942-2_CHEF_RETAIL_9.0_PPTS29.74-29-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I want to know can I update this version and how to?
Please help me as quickly as possible
Thanks and regards
azhar
No issue downgrade
You can downgrade one power there is no issue of you downgrade it don't worry
NitrodiumSK said:
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
Click to expand...
Click to collapse
Any how can anybody provide stock rom oem fastboot mode with March update???
azhar63 said:
Hello dear Mates!
I purchased a cellphone yesterday Motorola Power One. its working fine, but I want to ask n know two things,
1. It has unlocked "bootloader" and on all restart it says to relock it to secure it. If I relock it, will still work or stop working?
2. It has Android 8.1.0 SKU XT1942-1 BUILD NUMBER OPT28.81-45 When I click update it shows Your Device is up-to-date
Android version 8.1.0
Current Version OPT28.81-45
Security Patch level September 1, 2018
But today I saw this update
XT1942-2_CHEF_RETAIL_9.0_PPTS29.74-29-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I want to know can I update this version and how to?
Please help me as quickly as possible
Thanks and regards
azhar
Click to expand...
Click to collapse
Yeah bro flash this room via fastboot commands
motorola one power
my moto one power starts freezing and when i restart its touch stop working....i flashed stock rom using twrp but still same problem and also try to flash rom using fastboot but still its system ui not responding and phone freezes and touch not working after reboot...please help please!!!:crying:
aum25 said:
Yeah bro flash this room via fastboot commands
Click to expand...
Click to collapse
Did you flash that rom in 1942- 1 ??? I have the same model num and running oreo... Want to update pie??? Were you successful in doing that ? Because that firmware file was for 1942-2 ? Plz share experience.
rudranshrajput said:
my moto one power starts freezing and when i restart its touch stop working....i flashed stock rom using twrp but still same problem and also try to flash rom using fastboot but still its system ui not responding and phone freezes and touch not working after reboot...please help please!!!:crying:
Click to expand...
Click to collapse
Did you install any third party app or it happens by itself? I had the same problem but i was messing around with the moto app launcher. Anyhow, try flashing this stock rom with latest june security patch. Don't use TWRP, it is a full rom. Use Fastboot mode. Also backup your device, if you want your files back. This will do a clean install of the rom.
Here is the link: https://drive.google.com/file/d/1lLmDvX4R4o2Jqrhp1RQflap27jxe4hXS/view
Steps:
1) Boot your device into fastboot mode
2) Open flashall.bat and wait for flashing
3) Reboot
colorist said:
If your phone is defined in the device manager as COM port 9008, you can restore it according to this instruction.
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
The file 'blank-flash.bat' can be taken in the folder "mbm-ci", the cat will be in the unpacked firmware.
https://mirrors.lolinet.com/firmware/moto/chef/official/RETAIL/fastboot_chef_oem_user_9_PPT29.74-25_64be_release-keys-cid50_oem.tar.gz
After installing this file, the phone will be able to boot into fastboot.
After that, you can restore the phone by flashing the same downloaded firmware using the method described here.
https://web.telegram.org/#/[email protected]
[1:27:03 PM]
smyaknti.tar.gz
:
admin
Set your device in fastboot mode do the following and skip the
fastboot -w
step if you don't want to format everything :
fastboot oem fb_mode_set
fastboot -w
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
(If you have more or less sparsechunk files then continue or terminate beforehand accorfingly)
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot oem fb_mode_clear
fastboot reboot
Just yesterday, I so restored my phone from a brick, obtained after installing an unofficial TWRP and firmware RR.
Good luck.
Click to expand...
Click to collapse
thanks by you my device just boot up in fastboot mod
thank you very much
best regard
Need help with phone bricked.
I was installing the Arrows OS in Motorola one power and after rebooting, the set is in the bricked mode now it's not responding to anything. Can anyone please guide how can I fix it?
I got similar problem.when I'm flashing arrows or others custom ROMs(1custom ROM,2twrp installer)and restart my phone no restarting only bricked.help only blankflash
Phone bricked after installing arrow is on p30 note xt1942-1
I tried the blankflash method but not working, I'm getting I/O error
Any ideas?
Can't even fastboot flash boot recovery system...and thats all folks...waste of money.
Failed attempt to unlock the bootloader and instal TWRP ?
Hi guys, visit this link. We had similar problems and we could solved that.
Read all and you would get the solution
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
roadworker said:
Failed attempt to unlock the bootloader and instal TWRP ?
Click to expand...
Click to collapse
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.
Just flash the ROM again..It will be back lm
mhex said:
Just flash the ROM again..It will be back lm
Click to expand...
Click to collapse
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked
SuperDroidMe said:
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked
Click to expand...
Click to collapse
Every time you restart back to the bootloader you need to do: "fastboot oem nubia_unlock NUBIA_NX629J" first
SuperDroidMe said:
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.
Click to expand...
Click to collapse
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.
xphyle1971 said:
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.
Click to expand...
Click to collapse
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.
SuperDroidMe said:
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.
Click to expand...
Click to collapse
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot
mswl04 said:
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.
SuperDroidMe said:
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.
Click to expand...
Click to collapse
btw did you rooted the phone?
mswl04 said:
btw did you rooted the phone?
Click to expand...
Click to collapse
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.
SuperDroidMe said:
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.
Click to expand...
Click to collapse
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick
mswl04 said:
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick
Click to expand...
Click to collapse
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?
SuperDroidMe said:
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?
Click to expand...
Click to collapse
all you need to do is to fix the corrupt image so later once you finish the first step of booting to the phone then you can flash to global rom. if you have the cn version 2.27 boot.img then you can download the adb and use the command to fix the phone
Shouldn't have messed with something that wasn't broken. Now you have a nice brick to use as a paperweight. Hope you get it fixed tho. Good luck.
Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.
SuperDroidMe said:
Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.
Click to expand...
Click to collapse
Congrat you finally fix it
Hows your phone?..Did it work.