Related
hi friend i have xiaomi redmi 4x i have unlocked bootloader OK
I have install twrp 3110 OK
when i install this xiaomi.eu rom latest beta everything is OK
when i want install back latest stable global 9.110 by xiaomi i download normal recovery rom from xiaomi site and put it on phone storage then i normal go twrp wipe (factory reset) install 9110 install is ok
when i click reboot system i see on boot only mi logo and no this .... powered by android
also same when i choose in twrp wife all data system etc expect storage where is this downloaded rom.
could any explain me why it stuck at boot if installation via twrp is ok ?
but when i install back this xiaomi.eu rom boot works OK
tubabuyukustun said:
hi friend ....
could any explain me why it stuck at boot if installation via twrp is ok ?
Click to expand...
Click to collapse
Hello, this happens because official MIUI boot.img verifies if recovery.img is also official/original.
You have 2 options to resolve the boot problem:
1. If you want to keep TWRP then modify boot.img... http://en.miui.com/thread-249666-1-1.html (with R4X image of course)
and flash it from TWRP or fastboot: fastboot flash boot boot.img
2. If you want original recovery, get "recovery.img" from the exact TGZ image as your MIUI ZIP
and flash it: fastboot flash recovery recovery.img
:good:
Stock Firmware for Redmi S2:
MIUI- 9.5.6 android 8.1
type- fastboot & Recovery
China Stable
Global Version QCN & twrp Will be added Soon When it available.
Download Links:
Recovery ROM: http://bigota.d.miui.com/V9.5.6.0.OEFCNFA/miui_HMS2_V9.5.6.0.OEFCNFA_c715106721_8.1.zip
fastboot ROM:
http://bigota.d.miui.com/V9.5.6.0.O...EFCNFA_20180510.0000.00_8.1_cn_c791145450.tgz
Flashing Guide:
https://romprovider.com/2018/01/flashing-guide-xiaomi/
Rooting:
Not testes Sharing only My ideas:
First unlock With MI unlock tool
then take boot.img File From Downloaded Firmware and move it to Phone
Install magisk manager Open Click update/Install magisk. Chose patch boot.img Point Download boot.img File
wait For success.
then Reboot to bootloader and Flash with this code
Code:
fastboot flash boot boot.img
Have a Good Luck:good::laugh::laugh::laugh:
please help me for the boot.img file that has been tested thanks
mark332 said:
Stock Firmware for Redmi S2:
MIUI- 9.5.6 android 8.1
type- fastboot & Recovery
China Stable
Global Version QCN & twrp Will be added Soon When it available.
Download Links:
Recovery ROM: http://bigota.d.miui.com/V9.5.6.0.OEFCNFA/miui_HMS2_V9.5.6.0.OEFCNFA_c715106721_8.1.zip
fastboot ROM:
http://bigota.d.miui.com/V9.5.6.0.O...EFCNFA_20180510.0000.00_8.1_cn_c791145450.tgz
Flashing Guide:
https://romprovider.com/2018/01/flashing-guide-xiaomi/
Rooting:
Not testes Sharing only My ideas:
First unlock With MI unlock tool
then take boot.img File From Downloaded Firmware and move it to Phone
Install magisk manager Open Click update/Install magisk. Chose patch boot.img Point Download boot.img File
wait For success.
then Reboot to bootloader and Flash with this code
Code:
fastboot flash boot boot.img
Have a Good Luck:good::laugh::laugh::laugh:
Click to expand...
Click to collapse
Only for device with Unlock Bootloader.... Not work for Locked Bootloader.
Woy kampank hp gua bejat anjeng
please help me for the boot.img file .. my device got stuck in bootloop and not able to download entire rom zip
Urgent, please sent me stock boot.img for redmi s2
Can anyone help me with the stock recovery image please?
Which rom are you using? Stock but version number?
You can get full factory images from Xiaomi website. For example, here is the link for Global EEA:
https://c.mi.com/thread-2459743-1-0.html
You will have 2 versions: the ".zip" and the ".tar.gz" (which is often bigger)
Take the ".tar.gz" version and uncompress it: you will find inside a "recovery.img" file which can be flashed by fastboot or TWRP.
However, like nakulp means, you should take care. In my case, I wanted to apply recent OTA update Global EEA 10.3.4 for 10.3.3. As I had TWRP recovery, I needed to replace it by original recovery and the image I got was from 10.3.1: it resulted in a black screen on recovery start. Only the "recovery.img" from 10.3.3 worked fine. This image seems to work fine also on 10.3.4.
Thanks man appreciate your help now i am on MiUi 11.0.2.0 stable based on android 10 which is really good and bloatware free
Its working smoothly
Hi, my recovery doesn't boot up, I only have fastboot mode, can someone publish the stock recovery image if you have it, i don't find it... it would be so cool, thank you everyone
HardZikk said:
Hi, my recovery doesn't boot up, I only have fastboot mode, can someone publish the stock recovery image if you have it, i don't find it... it would be so cool, thank you everyone
Click to expand...
Click to collapse
Download a fastboot ROM and extract the recovery.img file. There's lots of links to fastboot ROMs on these forums.
Robbo.5000 said:
Download a fastboot ROM and extract the recovery.img file. There's lots of links to fastboot ROMs on these forums.
Click to expand...
Click to collapse
Yes thank you, but download are so slow, it's the reason i asked for a stock recovery directly. If I finish my download one day, I would post the stock image if I can, but not beforce tomorrow for sure...
I need this too, someone please upload
I need miui stock recovery for Redmi K20 pro/MI 9T pro. Because i am on miui 12.0.3 and i want to update it to miui 12.0.4 and my custom recovery is outdated
Minato216 said:
I need miui stock recovery for Redmi K20 pro/MI 9T pro. Because i am on miui 12.0.3 and i want to update it to miui 12.0.4 and my custom recovery is outdated
Click to expand...
Click to collapse
Download recovery/zip or fastboot/tgz firmware and extract recovery.img
tgz = tar, gzip hence must be un-gzipped and un-tarred.
7-zip on PC or MiXPlorer on the phone
zgfg said:
Download recovery/zip or fastboot/tgz firmware and extract recovery.img
tgz = tar, gzip hence must be un-gzipped and un-tarred.
7-zip on PC or MiXPlorer on the phone
Click to expand...
Click to collapse
Actually the size of fastboot rom is 3GB and i was looking for some data efficient way. I only need recovery.img so what's the point in downloading whole rom .
Deleted (wrong thread)
Minato216 said:
I need miui stock recovery for Redmi K20 pro/MI 9T pro. Because i am on miui 12.0.3 and i want to update it to miui 12.0.4 and my custom recovery is outdated
Click to expand...
Click to collapse
You can just update your custom recovery in that case and then flash MIUI 12.0.4.0
zgfg said:
Download recovery/zip or fastboot/tgz firmware and extract recovery.img
tgz = tar, gzip hence must be un-gzipped and un-tarred.
7-zip on PC or MiXPlorer on the phone
Click to expand...
Click to collapse
Can you please provide me a link for recovery zip for my device (REDMI K20 PRO indian variant)
Minato216 said:
Can you please provide me a link for recovery zip for my device (REDMI K20 PRO indian variant)
Click to expand...
Click to collapse
You can find all firmeares on Xiaomi Firmware Updater - search per device, erc:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
zgfg said:
You can find all firmeares on Xiaomi Firmware Updater - search per device, erc:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Click to expand...
Click to collapse
I need recovery.zip which one should i download
Minato216 said:
I need recovery.zip which one should i download
Click to expand...
Click to collapse
Pls instead of asking take your own time to browse, study and learn how to use their repository
- First you must know what is the version you are looking for, is it e.g. v12.0.4.0 QFKINXM or which one
- Use their Search box to find it
- Look for the type Recovery, not Fastboot (you were asking for recovery)
- Click to Download (what else), and on the new screen download either Full ROM (full OTA) or Incremental update (incremental OTA from the previous version) - again Recovery/zip file
Screenshots below
zgfg said:
Pls instead of asking take your own time to browse, study and learn how to use their repository
- First you must know what is the version you are looking for, is it e.g. v12.0.4.0 QFKINXM or which one
- Use their Search box to find it
- Look for the type Recovery, not Fastboot (you were asking for recovery)
- Click to Download (what else), and on the new screen download either Full ROM (full OTA) or Incremental update (incremental OTA for previous version) - again Recovery/zip file
Screenshots below
Click to expand...
Click to collapse
I downloaded the firmware but recovery.img was not included in that so i asked whick one should i download
Minato216 said:
I downloaded the firmware but recovery.img was not included in that so i asked whick one should i download
Click to expand...
Click to collapse
OMG - please try things yourself or use your froend google to learn things
If not in recovery/zip firmware then download fastboot/tgz, extract (un-gzip, un-tar) to tind recovery.img there
I am using Redmi Note 10S and in my device's fastboot rom file, there is no any recovery.img file. I have done the extraction process of .tgz file lots of time, but after all I did not get any recovery.img file in fastboot rom file. So can anyone help me that how can I get my stock recovery image file?? My device is not rooted.
I have a redmi note 9 on miui 12.0.10.0.QJOEUXM and i want to root it. Do you guys know how to do it ?
Thanks..
Same as any other miui version.
Flashing the magisk patched boot.img.
VD171 said:
Same as any other miui version.
Flashing the magisk patched boot.img.
Click to expand...
Click to collapse
Yes but where i can find this magisk patched boot.img?
You can patch that manually, using the magisk app.
Just extract the boot.img from the stock miui and then patch it using the magisk app.
VD171 said:
You can patch that manually, using the magisk app.
Just extract the boot.img from the stock miui and then patch it using the magisk app.
Click to expand...
Click to collapse
Ooo thanks youu
I also want to root my Note 9(QJOEUXM at 12.0.10.0). But I've read contradicting information here in the forum regarding the approach. E.g. the VBMETA.IMG. Do I need the patched version or do I have to flash the originals with the command fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img?
I'm a little cautious because I already wrecked the Note 9 with the original xiaomi flash tool when trying to downgrade.
Or can I easy use the XiaoMiTool V2?
Meik2 said:
I also want to root my Note 9(QJOEUXM at 12.0.10.0). But I've read contradicting information here in the forum regarding the approach. E.g. the VBMETA.IMG. Do I need the patched version or do I have to flash the originals with the command fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img?
I'm a little cautious because I already wrecked the Note 9 with the original xiaomi flash tool when trying to downgrade.
Click to expand...
Click to collapse
The patched vbmeta and the stock vbmeta flashed with "disable-verity and disable-verification" are exactly same.
Any patched vbmeta from any miui version will works perfectly.
OK. Here you wrote that the RECOVERY.IMG is needed. But this File is not part of the stock Fastboot Image. Do i need the recovery.img or just
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched.img
and the Device has root.
As far as I understand, I still have to flash the recovery to get the TWRP recovery.
Meik2 said:
OK. Here you wrote that the RECOVERY.IMG is needed. But this File is not part of the stock Fastboot Image. Do i need the recovery.img or just
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched.img
and the Device has root.
As far as I understand, I still have to flash the recovery to get the TWRP recovery.
Click to expand...
Click to collapse
Recovery.img is not needed.
You can avoid recovery safely.
If you want to have the original recovery, just flash the stock recovery.img.
If you want to have twrp, just flash the twrp recovery.img.
[RECOVERY PROJECT] Collection of TWRP & PBRP & SHRP & ORANGEFOX for MERLIN (Redmi Note 9 / Redmi 10X 4G)
Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Warnings: - This is not a development thread. This is a help thread. - I didn't build any of them. Use at your own risk. - I don't have the source code for any of them. Use at your own...
forum.xda-developers.com
OK. The i will start rooting my device now. Where can I get the TWRP-recovery.img and the stock recovery for 12.0.10.0? How i said, the recovery.img is not part of the official stock zip File
Will SPFlash Tool still work with this Android Version? Then I could do a backup for the recovery Partition. BTW. Root was successfull. Thanks for your support.
Meik2 said:
OK. The i will start rooting my device now. Where can I get the TWRP-recovery.img and the stock recovery for 12.0.10.0? How i said, the recovery.img is not part of the official stock zip File
Click to expand...
Click to collapse
TWRP for V12.0.6.0 will works perfectly.
The zip file is the recovery mode rom.
The tgz file is the fastboot mode rom.
The zip file doesn't come with the recovery.img file.
The tgz file comes with the recovery.img file.
Here, you can find many TWRP versions:
[RECOVERY PROJECT] Collection of TWRP & PBRP & SHRP & ORANGEFOX for MERLIN (Redmi Note 9 / Redmi 10X 4G)
Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Warnings: - This is not a development thread. This is a help thread. - I didn't build any of them. Use at your own risk. - I don't have the source code for any of them. Use at your own...
forum.xda-developers.com
Here, you can find the stock recovery.img file:
[IMG][STOCK][PATCHED] Boot, Vbmeta and Recovery: Images Partitions for MERLIN (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
Original Stock BOOT.IMG for MERLIN + Magisk Patched BOOT.IMG for MERLIN + Original Stock VBMETA.IMG for MERLIN + Original Stock RECOVERY.IMG for MERLIN Works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Firmware Versions: - (Engineering)...
forum.xda-developers.com
Meik2 said:
Will SPFlash Tool still work with this Android Version? Then I could do a backup for the recovery Partition. BTW. Root was successfull. Thanks for your support.
Click to expand...
Click to collapse
Yes, but you need to bypass the EDL authentication.
Or, you can just enter in fastboot and flash the preloader of V12.0.4.0 and you will can skip bypass the EDL authentication.
Perfect. That's all i wanted to know. -- Nearly all. What happens if my Note 9 starts an OTA Update? I've seen there is one available few minutes ago. 12.0.1.0 RJOEUXM
Meik2 said:
Perfect. That's all i wanted to know. -- Nearly all. What happens if my Note 9 starts an OTA Update? I've seen there is one available few minutes ago. 12.0.1.0 RJOEUXM
Click to expand...
Click to collapse
If you root the device and flash it using OTA Update, probably the device will got a bootloop.
You can flash updates using fastboot safely and securely.
Just use the "flash_except_data" file.
OK. Thanks for this great support.
best regards
Meik2 said:
OK. Thanks for this great support.
best regards
Click to expand...
Click to collapse
You are welcome, my friend.
Enjoy.
Regards
Hi guys, i just flashed (with a light wipe) the last rom for my Xiaomi Mi 11 Ultra (obtained on the update section of parameters) and i first lost all my config.
So, i decided to restore the backup i made just before flashing and here is the drama, it boot directly into TWRP and i can't seem to find my storage anymore (tried file manager)
TWRP also tells me that no OS is installed, please help, i'm desperate
I think the first step is to recover access to internal sdcard, and maybe then i can restore a backup
Thank you !
simply, Fastboot and install official rom using mi flash tool.
thats one of the penalties you'd pay of installing eu rom.
hassanaliyeh said:
simply, Fastboot and install official rom using mi flash tool.
thats one of the penalties you'd pay of installing eu rom.
Click to expand...
Click to collapse
Ok, will try this tomorrow, thank you !
Is it this one : https://www.xiaomiflash.com/ ?
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
This is the official one. Use the newest version
hassanaliyeh said:
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
This is the official one. Use the newest version
Click to expand...
Click to collapse
Thank you very much, sir !
Will try this and post the result, maybe with a little tuto if it's not already everywhere ^^
So, tried 5 times and not once a good result, the better i can obtain is 12.5.7.0 global working, flashed with xiaomitool. TWRP ok, and i will try Magisk next.
Every other tries solded by an sdcard/os/data loss T_T
That's a mystery. I ran on 12.5.17.0 all fine before this incident and i cannot get it work anymore :/
I obtained rom from https://androidfilehost.com/?w=files&flid=321331
TWRP from https://androidfilehost.com/?fid=14943124697586336381
Also tried this method again (this was my first method and it worked like a charm till this 12.5.20.0... )
[ROM][MIUI][star/mars] Xiaomi.eu ROM for Xiaomi MI 11 Pro / Ultra
How to install Xiaomi.eu ROM for Xiaomi MI 11 Pro / Ultra We will release fastboot ROM versions until TWRP for star/mars is released TWRP RELEASED Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on...
forum.xda-developers.com
The problem with global is it seems to be greatly outdated (patch from 2021.09, that's a huge security risk to be months backward nowadays, let aside bug correction, new functionnality, etc)
I can't seem to find a more recent global version (updater within settings tells me there's no more up to date version).
Do someone have an idea, please ? :/
What i'm doing :
1. put device on fastboot mode
2. launch xiaomitool and flash 12.5.7.0 global rom
3. reboot into fastboot
4. launch xiaomi unlock and unlock device
5. boot TWRP with fastboot boot twrp.img in cmd (command returned all ok)
6. into "soft" TWRP, One Key Inject TWRP
7. into "hard" TWRP > install and give it the .zip rom file
8. after the rom installed, all broken again :/
Hi,
there is no TWRP-ROM available for the Ultra - it's still in fastboot-ROM phase.
Flash via fastboot. Unlocking is just needed once until relocking with orig. ROM.
(Optionally) Copy boot.img from ROM-folder to phone.
Use Magisk to patch boot.img
Flash patched boot.img to boot_a and boot_b via fastboot.
Wait until TWRP-compatible-zip's for the Ultra to begin to appear.
cya
gammelobst said:
Hi,
there is no TWRP-ROM available for the Ultra - it's still in fastboot-ROM phase.
Flash via fastboot. Unlocking is just needed once until relocking with orig. ROM.
(Optionally) Copy boot.img from ROM-folder to phone.
Use Magisk to patch boot.img
Flash patched boot.img to boot_a and boot_b via fastboot.
Wait until TWRP-compatible-zip's for the Ultra to begin to appear.
cya
Click to expand...
Click to collapse
Thanks for that ! ^^
That sure seem a simple task
You're telling me that i can, from my 12.5.7.0 global, patch the boot.img (90mb) from the 12.5.20.0 eu with magisk, flash this with fastboot and that it will work ?
Seems too wonderfull to be true XD
EDIT:
My bad, you said "optionnally", not "alternatively"
So, i'm stuck here, i don't know and can't seem to find the fastboot cmd to install the xiaomi eu rom in .zip format
Do you know it please ?
In all the 11 Ultra A12 weekly EU ROMs, the format is fastboot only. Just extract the .zip file to a folder on your desktop, connect your phone in fastboot mode, power on and vol down and then click on the update bat file. If your coming from a different branch, click on the update and format bat file ( the bat files will be in the upper most extracted folder). It is a simple as that .
Sathelp said:
In all the 11 Ultra A12 weekly EU ROMs, the format is fastboot only. Just extract the .zip file to a folder on your desktop, connect your phone in fastboot mode, power on and vol down and then click on the update bat file. If your coming from a different branch, click on the update and format bat file ( the bat files will be in the upper most extracted folder). It is a simple as that .
Click to expand...
Click to collapse
Hi Sathelp !
An ultra big thank you !! The flash worked wonderfuly it seems
That's awesome how simple it is, in fact, and to say that i lost hours and hours without being able to approach this, i'm so noob :/
much kudos :x
I'm now on the way to root and finally, can reuse my mi11 ^^