Hi,
I Have had issues with the micro usb charge port on my HTC Raider.
I have resoldered the jack to the pcb and in the process I managed to break the flex cable that attaches to the motherboard.
I was wondering if anyone has information on the pinout of the flex cable?
I only need the vss and gnd just to get the unit charging again.
I have searched all over the net and no luck.
I plan on ordering a new connector but in the meantime I need a working phone.
tia.
I think... @repairsuniverse might be able to help
Related
hi
i lost my USB for PC cable for jabra bt 8010.
please help me, show me what cable i can buy to replace it,
it seems that it can use some other cable to replace.
could you help me
so thanks
could i use the USB for PC cable for BT330/BT500/BT800/JX10/BT 8040 for BT8010.
or could i use universal usb cable which has the same size for this one?
because I tried to find out cable but failed, no one sells that.
please help me to answer this question.
thanks so much
hi, just like you i also need usb cable for my 8010. ive googled high & low but to no avaiL? especially as im in the Philippines . . maybe by this time you have new info? pls help & thanks
Its just a usb-to-micro-usb cable.
thanks, but the micro usb's available on ebay are for motorola & looking at the pics -> - > they look different . .
Micro usb is micro usb. Its a standard.
usb may be a standard, but ...
... apparently the cable ends are not. I've have three different Jabra headsets in the past several years, all of which used a usb charging cable and none of the usb cable ends on the headset side were compatible with each other. I made the mistake of ordering off ebay and the cables I received did not fit my 8010. My advice: Don't buy a usb cable unless the seller can confirm that the cable works with your particular headset.
@kihoalu
thanks very much. if you get wind of a supplier, pls post. im sure there are others who also need this cable
I wish I knew why yours are all different, my 8010 came with a standard micro-USB port. The charger and the computer sync cable are quite normal.
Ok Guys and Gals,
I had a topic going on for a while about windows not detecting my Tablet.
we went round and round about drivers, Novacom, and even formatted my system.
But here what it was My micro usb cable.
My dog had eaten my Hp one. so I bought a generic one through EBAY
I my son took my cable for whatever reason so I grabbed the one that cae with my phone and it fixed everything
So heres my question
what is the right Micro usb cable to buy that will give optimum power abnd data transfer
A micro usb 2.0?
anybody that can help would be great
Any decent microUSB cable will work, its just 4 wires inside linking your Touchpad to your computer. I have used a Motorola, Blackberry, etc branded cables with no issues. Its not uncommon for cheap generic cables to have issues if they shipped with a defect.
Since it almost impossible to find a PDMI Port, I retrofited a MicroUSB port.
I even contracted FOXXCON, got a reply contract DELL for replacement part.
I have Charging and Data + / - (Detected by PC) working fine.
Only Issue is that the device shows it's not charging when Power ON and connected to PC (Hardware Charging LED is lit).
-Maybe this is Normal??
It does show charging when power on and connected to Charging Adapter.
I will post pictures when I get home today.
Last Pic:
Basically Gutted bad PDMI Socket and Shove MicroUSB port in PDMI frame.
Looked up Pin out for PDMI and Micro usb for data +-.
DJ_MiX said:
Since it almost impossible to find a PDMI Port, I retrofited a MicroUSB port.
I even contracted FOXXCON, got a reply contract DELL for replacement part.
I have Charging and Data + / - (Detected by PC) working fine.
Only Issue is that the device shows it's not charging when Power ON and connected to PC (Hardware Charging LED is lit).
-Maybe this is Normal??
It does show charging when power on and connected to Charging Adapter.
I will post pictures when I get home today.
Click to expand...
Click to collapse
Are you able to reach Fastboot with this mod?
PDMI connector to mini usb connector
Hello man. My name is Mario. I come from Italy. I'm a psychologist,but on the spare time I like to play with linux & mobile & tablet & technology in general. I was searching for a OTG adapter that was able to recharge my nexus 10 and at the same time that accepts an external sd card and someone has suggests this to me :
eKit 4 in 1 Data Sync Connection Kit For Samsung Galaxy Tab 2 10.1 & Note 10.1
you can read the full story here :
http://android.stackexchange.com/qu...ard-and-recharge-the-battery-at-the-same-time
the problem is that I haven't read very well what he says and I haven't understood that it is not good for the nexus 10. For this reason I have tried to search a way to convert the PDMI connector to a mini usb connector and I have found this thread. I would like to ask you if I can make the same thing that you have done and if you can tell me which electric modification I have to make to the board of this connector to convert it as a mini usb connector. Thanks.
Anyone had to replace usb charging flex cable? Are the different revisions compatible with each other, like mine is REV11A.
Hi,
I replaced my broken backglass and somehow managed to cut the wifi cable.
Does any of you guys know where to order the right cable?
Surely Huawei are your first port of call? It should at least be OEM.