Is it possible to tell the Diamond to stay locked with the screen off until unlocked manually while a handsfree is connected? I keep my phone in my pocket while driving and it unlocks itself when a call is in progress and then locks itself again, when the call finishes. But if anything is pressed, and it does if I even move a centimetre, it won't lock back again and will in most cases call back the person I've just had a conversation with.
Is there a setting I'm missing or would an application have to be used?
IceBone said:
Is it possible to tell the Diamond to stay locked with the screen off until unlocked manually while a handsfree is connected? I keep my phone in my pocket while driving and it unlocks itself when a call is in progress and then locks itself again, when the call finishes. But if anything is pressed, and it does if I even move a centimetre, it won't lock back again and will in most cases call back the person I've just had a conversation with.
Is there a setting I'm missing or would an application have to be used?
Click to expand...
Click to collapse
Use TouchLockPro
I have the same need and tried plenty of solutions, no good so far.
One of them was actually an early version of TouchLockPro, however it lacked an important functionality of treating locking as a mode. It has a "lock on incoming call" feature, but that's not what I need because most of the time my phone is on the desk and shouldn't lock on every incoming call. What I need (and I guess IceBone is with me on that) is just a way to make sure that when the phone is locked - it just stays this way till instructed otherwise...
erezshermer said:
I have the same need and tried plenty of solutions, no good so far.
One of them was actually an early version of TouchLockPro, however it lacked an important functionality of treating locking as a mode. It has a "lock on incoming call" feature, but that's not what I need because most of the time my phone is on the desk and shouldn't lock on every incoming call. What I need (and I guess IceBone is with me on that) is just a way to make sure that when the phone is locked - it just stays this way till instructed otherwise...
Click to expand...
Click to collapse
TouchLockPro can be tuned to your needs, just disable autolockonpoweron and you are in control...
I will check it out.
EDIT: Sorry, but that's completely useless to me. There's a thousand other options that I had to disable, it didn't unlock itself with the power button, it also didn't stay locked on incoming call, even though I double checked I had that enabled, it also puts an annoying white square in the windows status bar, which covers the clock.
All I want is for the phone to stay locked on incoming and outgoing calls. If it can be set to only stay locked only while a handsfree set is connected (the phone does know the difference, it shows a nice little headset icon), it would be perfect.
This is the biggest issue with my TD...
Because of this issue BT headset is totaly useless (if device in your pocket or case).. After incoming or outgoing call need to check device for unwanted actions..
Well, if we get more people requesting this, maybe one of the devs could cook up a quick fix.
IceBone said:
I will check it out.
EDIT: Sorry, but that's completely useless to me. There's a thousand other options that I had to disable, it didn't unlock itself with the power button, it also didn't stay locked on incoming call, even though I double checked I had that enabled, it also puts an annoying white square in the windows status bar, which covers the clock.
All I want is for the phone to stay locked on incoming and outgoing calls. If it can be set to only stay locked only while a handsfree set is connected (the phone does know the difference, it shows a nice little headset icon), it would be perfect.
Click to expand...
Click to collapse
The white square is the inidcator that it is locked. The configured foreground and background color are reversed when locked.
I will put a convenience setting (Bluetooth) in the action screen on the wish list, so it will never unlock/lock when that mode is activated by te other unlocking methods. But there must also be way to unlock then. Maybe the Stylus still unlocks, so you can disable Bluetooth mode?
Reason4444 said:
This is the biggest issue with my TD...
Because of this issue BT headset is totaly useless (if device in your pocket or case).. After incoming or outgoing call need to check device for unwanted actions..
Click to expand...
Click to collapse
I will add this to the next version of TouchLockPro, a way to enable/disable bluetooth lock mode
Could you possibly release a cab that does only that? It would be perfect, it's the only functionality I want.
IceBone said:
Could you possibly release a cab that does only that? It would be perfect, it's the only functionality I want.
Click to expand...
Click to collapse
You can use StylusLock, which makes it possible to lock/unlock only using the stylus sensor. This can be used in combination with Bluetooth.
Also TouchLockPro can be used in combination with Bluetooth, but then you need to change more settings, but this is easy too, via the TouchLockAction settings screens:
- Light Sensor: Uncheck "Use Light Sensor"
- G Sensor: Uncheck "Use G Sensor"
- Nav Sensor: Uncheck "Use Capacitive Nav Sensor"
- TAPI: Uncheck "Use TAPI"
- Other Settings: Uncheck "AutoLockOnPowerOn"
Thereafter you can lock the phone by taking the Stylus Out and putting back in within 1 second and use Bluetooth for picking up the phone. If you take out the Stylus, it will also unlock.
But I would still have to take the stylus out if someone called and I wasn't connected to the bluetooth. Or is only the screen locked?
IceBone said:
But I would still have to take the stylus out if someone called and I wasn't connected to the bluetooth. Or is only the screen locked?
Click to expand...
Click to collapse
With the settings I gave, you are in control of locking. So if you did not lock the phone via the Stylus Out/In, it will not be locked, also when a call comes in or you power on (or external event) the phone.
From your response, I understood you only wanted locking with Bluetooth:
IceBone said:
Could you possibly release a cab that does only that? It would be perfect, it's the only functionality I want.
Click to expand...
Click to collapse
But of course, you can also use the capacitive touch area for unlocking and configure power on also as a locking means.
Other Settings: Check "AutoLockOnPowerOn"
Nav Sensor: Check "Use Capacitive Nav Sensor"
In the Nav Sensor screen you can fine tune your capacitive unlocking methods.....
Yes, the only thing I want is for it to stay locked until I unlock it manually when BT is connected.
IceBone said:
Yes, the only thing I want is for it to stay locked until I unlock it manually when BT is connected.
Click to expand...
Click to collapse
Ok, so the settings I gave you will do that.
But will those settings be disabled when bt is disconnected and the phone will unlock on an incoming call?
IceBone said:
But will those settings be disabled when bt is disconnected and the phone will unlock on an incoming call?
Click to expand...
Click to collapse
With the settings I gave, you are in control of locking. So if you did not lock the phone via the Stylus Out/In, it will not be locked, also when a call comes in or you power on (or external event) the phone.
The only thing you need to do, is lock it manually via the Stylus Out/In, when you want it locked (e.g. when using bluetooth).
Hmm i have the same problem , this sound very interesting. I did tried everything too. Nothing yet. The only solution is that "ZuinigeRijder" will find a fix or an addon. That would be really helpfull !!
ZuinigeRijder said:
With the settings I gave, you are in control of locking. So if you did not lock the phone via the Stylus Out/In, it will not be locked, also when a call comes in or you power on (or external event) the phone.
The only thing you need to do, is lock it manually via the Stylus Out/In, when you want it locked (e.g. when using bluetooth).
Click to expand...
Click to collapse
It would still require me to fiddle with it when I connect or disconnect. I've been thinking and the light sensor could also be used, lock the screen/keys permanently when in the dark (pocket) and switch to normal when out. I suspect your program can do that as well, but it's just too fiddly with all the other unneeded options. Can't you delete a few lines and make just a simple locker like that? Wouldn't even need to have a status icon like it does now.
I'm trying to set it up on my NC so that the WiFi turns off when the screen turns off. I'm following directions I've found on the net, but I can't seem to find the right condition.
I set up a WiFi off profile, and set it to turn wifi off, and under conditions, I have the following options,
Add Condition
Time Period
Calendar Keywords
Location
Incoming Call
Missed Call
Unread Text/SMS
Battery
Wired Headset Attached
Connected BT device
Connected to WiFi
Docking State
Profile status
I'm trying to get it to quit rebooting after the screen shuts off. It's becoming quite an annoyance, but not being able to find this setting is driving me more crazy.
Any one have this running and working?
there should be a screen status condition. you have to click inverse logic after selecting it. unsure why you're not seeing it :-\ but it also looks like you're missing some other conditions too. i have many more than that on the free version. screen status is at the bottom for me.
Sent from my SCH-I500 using XDA App
Yeah, Screen Status is the last condition on the list for me too, on the Lite version.
Silly me, I have been working in landscape and had to scroll down. Thanks guys
Does none of the smart lock tools actually work with this phone? The trusted places option worked perfectly on my OPO, but with this phone, I'm always asked to input my pattern or fingerprint when I'm at home. It's not an issue if I'm just turning on the phone because the fingerprint is super fast, but sometimes I like to open a notification right from the lock screen, but I can't do that if the smart lock isn't working...
I am running OOS 4.0.3 and I an confirm that Smart Lock is working.
I have set a trusted device via Bluetooth, in this particular case my Bluetooth module in my car.
Here's what happens and hopefully this is what you expect.
When I am outside of my house and walking to my car, my phone is locked and requires my fingerprint.
I turn on my car and my phone pairs with my car, which then enables the Smart Lock feature.
I then turn on my screen on my phone and I see a Lock Screen but it is slightly different. The lock symbol located at the bottom has a circle around it indicating that the phone only requires a swipe to go to my home screen. It does not require my fingerprint or pin/pattern.
No matter what you do the Lock Screen is present when Smart Lock is functioning. So far I am ok with this.
If you are looking to never see the Lock Screen when Smart Lock is functioning then I am not sure if you can do that.
There could be a way using Tasker for example IF Bluetooth is Connected to Car, set Screen Lock timeout to never and that might prevent the Lock Screen from appearing.
WE would have to test this and I am not sure if Tasker can change the Lock Screen timeout.
I hope this helps.
MysticGolem said:
I am running OOS 4.0.3 and I an confirm that Smart Lock is working.
I have set a trusted device via Bluetooth, in this particular case my Bluetooth module in my car.
Here's what happens and hopefully this is what you expect.
When I am outside of my house and walking to my car, my phone is locked and requires my fingerprint.
I turn on my car and my phone pairs with my car, which then enables the Smart Lock feature.
I then turn on my screen on my phone and I see a Lock Screen but it is slightly different. The lock symbol located at the bottom has a circle around it indicating that the phone only requires a swipe to go to my home screen. It does not require my fingerprint or pin/pattern.
No matter what you do the Lock Screen is present when Smart Lock is functioning. So far I am ok with this.
If you are looking to never see the Lock Screen when Smart Lock is functioning then I am not sure if you can do that.
There could be a way using Tasker for example IF Bluetooth is Connected to Car, set Screen Lock timeout to never and that might prevent the Lock Screen from appearing.
WE would have to test this and I am not sure if Tasker can change the Lock Screen timeout.
I hope this helps.
Click to expand...
Click to collapse
It seems the trusted location is very spotty for me at the moment. Sometimes it works and others it doesn't.
I've got a similar problem. The phone never unlocks when I'm at a trusted location. It unlocks when I'm connected to a trusted Bluetooth though. I've set the location using both my address and by using the Google Maps screen. Nothing works.
I'm using a OnePlus 3T with the regular operating system.
Same here. Trusted location only seems to work for a few hours after adding/resetting a location. After that, it is no longer recognized. I did see an issue brought up in the Pixel forums about this issue, but clearly it's not confined to that device. Here's a few threads about it:
https://productforums.google.com/forum/#!topic/phone-by-google/KNrSoHOhb_Q
http://forums.androidcentral.com/go...art-lock-trusted-places-doesnt-seem-work.html
Hopefully they are still looking into the issue and will release a fix as part of Android O whenever that comes to the 3/3T. Or maybe it's something that OP could look into, but I doubt we'll get that fixed in a timely manner either way...
I have the opposite problem. Phone will always unlock without prompting for fingerprint or code, regardless of being in a trusted location or not. It's pretty annoying.
Sendt fra min ONEPLUS A3003 med Tapatalk
Screen lock doesn't work.
Hi! My problem kinda different. My OP3T screen lock doesn't work. I tried to turn off smart lock. Changing the screen lock type, still doesn't work. Even with fingerprints. So anybody can open my phone by swiping it up. Did somebody have the same problem? Should i upload the video of it and link it?
i suffer from security issue
while in lock screen and try to scroll down the above bar that contains Wifi and data and so on icons it work normally while screen is locked
i use secure lock screen by fingerprint and password this issue not found in Huawei and samsung
the problem in this issue if any body take the phone he could easy turn it off and or using Airplane mode so i couldn't find the phone
Ghost_in_love said:
i suffer from security issue
while in lock screen and try to scroll down the above bar that contains Wifi and data and so on icons it work normally while screen is locked
i use secure lock screen by fingerprint and password this issue not found in Huawei and samsung
the problem in this issue if any body take the phone he could easy turn it off and or using Airplane mode so i couldn't find the phone
Click to expand...
Click to collapse
Accessing that area can be done on Samsung devices aswell. This is not a security flaw, that area is meant to be accessible from lock screen so if you need to turn flashlight on or similar things without needing to unlock your device.
But if you pick some of the buttons it will request you to unlock the device to do the action. Only some of the buttons can be used while on lock screen.
On Samsung if you touch WiFi, Bluetooth, mobile data and position tracking on lock screen it will then request you to unlock the device to be able to turn them off or on.
After checking my Asus Rog phone 2 I see what you mean now. It seems Asus didn't add such security, which they should.
Jake.S said:
Accessing that area can be done on Samsung devices aswell. This is not a security flaw, that area is meant to be accessible from lock screen so if you need to turn flashlight on or similar things without needing to unlock your device.
But if you pick some of the buttons it will request you to unlock the device to do the action. Only some of the buttons can be used while on lock screen.
On Samsung if you touch WiFi, Bluetooth, mobile data and position tracking on lock screen it will then request you to unlock the device to be able to turn them off or on.
After checking my Asus Rog phone 2 I see what you mean now. It seems Asus didn't add such security, which they should.
Click to expand...
Click to collapse
yes asus keep every things accessible so if someone stole ur phone in 3 sec the phone will be in offline mode and lost for ever
in my Huawei they totally block using the above scroll bar and add some useful shortcuts on lock screen for flash and so on
You need to enter password to disable the data connection from the lock screen ...
ÉlevenBavᜊ said:
You need to enter password to disable the data connection from the lock screen ...
Click to expand...
Click to collapse
but its easily to activate Airplane mode
My old thread was about pre-sale questions but now I have the phone and things got a bit messy and disorganized so I'm hoping to make it simpler and cleaner here.
If root is required for any of these, please specify... because I'm considering not rooting this phone.
1. Is there anything like CarrierIQ I need to remove?
2. Is there a way to customize the recent apps that appear at the bottom of the screen when I open the app drawer?
3. Is there a way to stop the phone from requiring pin/pass/print/face/etc when paired with a specific device? For example, while phone is paired with car I can double tap the screen at any time to unlock it without any kind of authentication needed. I had this on my last phone and loved it.
4. Is there a way, in general, to make it so if I double tap or press the side button to turn the screen off, it won't lock right away. For example, I tap the side button to turn screen off and 15 seconds later I don't have to authenticate at all to access phone. If I would have waited 31 seconds or longer, I would have to authenticate again. I also had this on my last phone.
5. Is there a way to instead of having icon and/or percentage for battery to have a number inside of a circle (preferably a dashed circle), where the circle also represents the corresponding percentage?
6. Is there a way to make a press of the home button in the center bottom of the screen do a full drag down of the upper menu....allowing me to toggle all of my quick toggles?
Thanks!
3. Yes, either use smart lock or set up a Bixby routine to keep phone unlocked device when connected to Bluetooth device (also works for WiFi)
mtm1401 said:
3. Yes, either use smart lock or set up a Bixby routine to keep phone unlocked device when connected to Bluetooth device (also works for WiFi)
Click to expand...
Click to collapse
Wow, I never saw that anywhere and I went through all the options. Now I searched for it and it's there. That's exactly what I wanted. I was using that on my old phone (Smart Lock). Thank you.
I also found the setting for automatic locking when screen turns off as well as disabling the "suggested apps".