Related
Hi All,
I tried to discuss my problem in a different topic, but i think in this topic i'll get solution to my problem.
Here is the case:
"Hi All,
I have some problem with the smartflash thing.
I installed the driver on my win7. I started the smartflash app, picked the battery, power, and volume down at the same time, put the cable on, and the smartflash cannot recognize the COM port...
The thing is, i did this procedure 2 mounth ago, and it worked. Yesterday i want to update my phone, but it didnt worked, except the factory reset
I did the LG PC Sync too, and it says, my phone is up to date... (my baseband is 0405)
Thank You in advance, and sry for my bad english
Originally Posted by shpapy
Hey you need to in install all you're drivers and reinstall them. You should first install the latest unified drivers from lg
Make sure you get to this step and everything is working also vervify under the device manger that there are no errors specially under "USB devices"
Afterwards do the procedure with the phone
Take bat out plug in cable put bat in press the button Don't open smartflash and it should still be closed..
Check if the phone is in se mode and check the device manager again u should have a device named lg usb serial port on a high com port it should be under usb devices. If you get and error on the driver or conflict goto the 1st post on this thered and download smartflash driver and update only the new lg usb device with him while the phone is still connected cz otherwise the device will desapear
That's about it if all is o.k open smartflash select on the right the driver and on the left the com port and you're done.
Good luck
Sent from my LG-P990 using XDA App
Hi,
Sry for disturb U again with my problem.
I did all of the things what you wrote, but if i plug the cable to my phone with power and vol-, The LG logo show for a few seconds, the touch leds blink for a half second, and after that the phone is shuting down, and nothing happens.
I have to reinstall my windows 7???
Thanks in advance!
Geza"
Thanks in advance!
Geza
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
Check if you have the latest drivers, connect the phone in recovery (vol- and connect to PC), flash with LGFlash Tool.
RuedasLocas said:
Check if you have the latest drivers, connect the phone in recovery (vol- and connect to PC), flash with LGFlash Tool.
Click to expand...
Click to collapse
I cant flash my LG with LG Flash because tihs program dont reconized my phone.. "Phone is not found"
croluka4789 said:
I cant flash my LG with LG Flash because tihs program dont reconized my phone.. "Phone is not found"
Click to expand...
Click to collapse
palalos81 said:
hi. i woould like to downgrade from v20a to v10h and the lgflashtool doesn't work.some times stuck on ready and some others on 10%i have tried almost everything from installing the drivers once more until change pc and ports.is there any option to downgrade with another way?
Click to expand...
Click to collapse
There is no other way...
Did you follow the tutorial? Did you remained calm and gave time for windows recognise your device?
Did you uninstall and re-install the drivers? You're able to reboot in SW mode (vol- pressed while connecting to PC)?
Here you have all files needed:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Delete your old files, download new ones and follow the tutorial.
Remember to remain calm and give time to system recognise and install everything needed.
Good luck :fingers-crossed:
RuedasLocas said:
There is no other way...
Did you follow the tutorial? Did you remained calm and gave time for windows recognise your device?
Did you uninstall and re-install the drivers? You're able to reboot in SW mode (vol- pressed while connecting to PC)?
Here you have all files needed:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Delete your old files, download new ones and follow the tutorial.
Remember to remain calm and give time to system recognise and install everything needed.
Good luck :fingers-crossed:
Click to expand...
Click to collapse
TNQ...I fix my LG...and know work perfect I put 20A kdz. 4.1.2. and phone work perfect
Same problem here
I have the same problem. I think the stupid thing I did was to install V20a without rooting the phone. Now I cant root it. IS11LG_SystemBackupTest.signed.ap would not run and when I try to recover either with LGflashboot or LG firmware recovery I get the same error message "morning call is empty" (very strange error message). I can go back to v20a but since I am not completely happy with it I would like to resolve it. Is there any chance to fix it? I am not very confident to format bootload or installing custom ROM.
Thanks
sgiedrius said:
I have the same problem. I think the stupid thing I did was to install V20a without rooting the phone. Now I cant root it. IS11LG_SystemBackupTest.signed.ap would not run and when I try to recover either with LGflashboot or LG firmware recovery I get the same error message "morning call is empty" (very strange error message). I can go back to v20a but since I am not completely happy with it I would like to resolve it. Is there any chance to fix it? I am not very confident to format bootload or installing custom ROM.
Thanks
Click to expand...
Click to collapse
You cannot root the phone on V20a using IS11LG_SystemBackupTest.signed.apk, since that file is used for versions V10x. Check out this link for rooting V20a: http://forum.xda-developers.com/showthread.php?t=2180688
croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
Same problem here!
xavierleonelbr said:
Same problem here!
Click to expand...
Click to collapse
Uninstall all drivers and folders like "LG United Mobile Driver" and "LG USB Modem Driver".
Re-install the drivers:
http://www.4shared.com/file/rPpP2btT/LGUnitedMobileDriver_S4981MAN3.html
http://www.4shared.com/file/ZSMf2x6n/LGUSBModemDriver_Eng_WHQL_Ver_.html
Take out the battery, press "Power Button" (just to discharge all phone components), put the battery back on the phone.
Press "Vol-" and connect to PC. Wait while windows detect the device and search in windows update for possible new drivers.
Windows won't find a thing but will take some time while trying...
After that you should be OK.
Just did similar to my phone and followed the advice in this thread - now sorted. Thanks guys you rock!
if u epic fail to manually force the drivers in just install android jdk open it and update it.
croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
I had the same problem, after running several recovery procedures and kdz files, I finally was able to restore the phone to it's original ICS rom.
Download the files in the description and follow up the video.
http: www youtube com watch?v=12v5A3pArJQ
hope it helps.
I tried to update my LG P880 with LGMobile support tool yesterday.
After connecting the phone, I clicked on Start updating. A window popped up, telling me that it was downloading.
When it came to the update part, it lost connection with the phone. I did exactly as it said I should do (unplug, take out battery and put in in again, turn on the phone and connect it to the pc), and it restarted with the updating.
On about the same point as last time, the pc lost the connection with the phone. I did the same as last time, but now, the phone just doesn't boots into the S/W update screen.
The phone is NOT booting, NOT working to flash kdz, and it is NOT detectet as a phone, neither by the pc nor the LGMobile support tool, but my pc detects a device called APX when I connect the phone to the pc.
What can I do? And what is wrong?
Do this http://forum.xda-developers.com/showthread.php?t=2069723
erst said:
I tried to update my LG P880 with LGMobile support tool yesterday.
After connecting the phone, I clicked on Start updating. A window popped up, telling me that it was downloading.
When it came to the update part, it lost connection with the phone. I did exactly as it said I should do (unplug, take out battery and put in in again, turn on the phone and connect it to the pc), and it restarted with the updating.
On about the same point as last time, the pc lost the connection with the phone. I did the same as last time, but now, the phone just doesn't boots into the S/W update screen.
My pc detects a device called APX when I connect it to the pc, but the LGMobile support tool doesn't recognize the phone.
What can I do? And what is wrong?
Click to expand...
Click to collapse
LGMobile support tool needs the phone to be in normal mode (generaly...).
No SW or other, just turn ON your phone and connect it to PC.
Stanley- said:
Do this http://forum.xda-developers.com/showthread.php?t=2069723
Click to expand...
Click to collapse
When I try to connect the phone, by pressing vol down, I am not getting the S/W Upgrade screen.
erst said:
When I try to connect the phone, by pressing vol down, I am not getting the S/W Upgrade screen.
Click to expand...
Click to collapse
Take out the battery, wait 30 sec. and put it back, press vol- and connect to PC while pressing.
Nothing is working
I don't get the SW upgrade screen when connecting to PC, the phone is an "Unknown device" og named APX under device manager, and the KDZ program cannot find the device.
Is it any other tings I can try?
so if its apx, you can simple flash it via APX mode with nvflash, right ?
(i remember when i rooting my Optimus 2X via APX , that flashed prerooted system.img... so you can try this method)
erst said:
Nothing is working
I don't get the SW upgrade screen when connecting to PC, the phone is an "Unknown device" og named APX under device manager, and the KDZ program cannot find the device.
Is it any other tings I can try?
Click to expand...
Click to collapse
Out of ideas... you can try to use the official lgmobile tool and use the emergency mode to recover it...
mmm273 said:
so if its apx, you can simple flash it via APX mode with nvflash, right ?
(i remember when i rooting my Optimus 2X via APX , that flashed prerooted system.img... so you can try this method)
Click to expand...
Click to collapse
Do you have a link to a guide or something?
RuedasLocas said:
Out of ideas... you can try to use the official lgmobile tool and use the emergency mode to recover it...
Click to expand...
Click to collapse
No. That just leads me to the LG Mobile Support tool, and it can't do anything.
Did you try to get SW upgrade with battery in? (I had the same problem)
Yes.
I have tried both with the battry in the phone and taken it out
erst said:
Yes.
I have tried both with the battry in the phone and taken it out
Click to expand...
Click to collapse
So what happened with your phone- do u get lg icon and charging indicator when u connect phone?
did u try lg flash tool - i know it needs usb serial port but just try and after all ports ready disconnect phone for 3-5 sec and reconnect -maybe the tool will feel it this way - i'm trying to get manual copy of of that lge usb serial port driver but its not working well on win7 64 i think it'll be easier on xp- if so try to update this APX driver to lge cdma usb serial manually and tryflash tool on it
also the flash tool has board dl option u might try
when connecting phone turned off here i can get some adbs drivers one of them is adb anroidnet usb serial port - the problem is when charging note dissapear(display turned off) its gone and i've to repress power button normal press to get it again
future81 said:
So what happened with your phone- do u get lg icon and charging indicator when u connect phone?
Click to expand...
Click to collapse
I got nothing when I plugged it in.
Anyway, I have sent it in to the place I bought it from, to get a new one.
Thanks for all the help you have given me here, but you don't need to try to help me more
hello i would like to know if someone knows how to unbrick the lg g flex ls-995
i can enter to download mode and i know how to flash again the .tot file but unfortunately when i plug the device my pc won't detect and i can't set the device to port com 41.
adb commands don't work and when i power up normally the device it will boot but will restart in less than 2 seconds.
any idea??
Drivers issue?
Clean your usb port...
did you do the master reset by pressing volume+ & power key
hold both the keys when you see the lg logo release the power key and press it again immediately.
try it...
and yes also reinstall all the lg drivers
hope this helps
Your LG Magna(H502) stuck on lg logo or bootlooping follow this guide to fix your device
Requirements:
USB Cable
LG Driver
LG FlashTool
MegaLock.dll
H502F Stock ROM
Let's start
1.Install the LG Driver
2.Install LG FlashTool and don't run it yet
3.Copy MegaLock.dll and replace in the folder LG FlashTool (C:\LG\LGFlashTool)
4.Turn off your device(remove battery and put it back to be sure its off)
5.Press and Hold the Volume UP button,plug in the USB cable and hold until you see "Firmware Update" you are now in download mode
Don't plug into usb 3.0 port and try other ports if getting issues
6.Open Device Manager on your PC
Go on "Ports (COM & LPT)" if the driver is installed properly, you will see "LGE Mobile USB Serial Port (COMxx)"
We need to change the COM port number to 41
Double click on "LGE Mobile USB Serial Port"
Go to Port Settings Tab and click Advanced
Change COM Port Number to COM41 and click OK
Disconnect USB cable,wait a few seconds and reconnect or reboot back in download mode to check if the drivers are working properly
7.Open LG FlashTool as admin
Tick the Select Manual Mode box
Extract LG Magna H502F.rar
Click the DLL "....." button and select the DLL found in the extracted folder(LGH502f_20150416_LGFLASHv190.dll)
Click the S/W add button and select the file with the .tot extension(LGH502fAT-00-V10a-CIS-XX-MAR-16-2015+0.tot)
Don't touch anything else and press ok
Flashing will format the phone all data will be lost
8.Click on the Yellow Arrow Button at the top left and it will start the flashing process
When you see ready in a few seconds you will be asked to disconnect and reconnect the cable and it will start flashing
It will take some time
During the flashing process, the phone will reboot itself and will display "MiniOS Factory Reset Status".Don't worry about it
When you see pass in FlashTool and Factory Reset Status 3 on your phone means the flashing process is completed
Disconnect the cable and remove the battery
Power on your phone and enjoy your working phone again (Don't forget to disconnect USB cable else if you didn't close the FlashTool it will go back in download mode and flash again)
Fixing problems
Factory Reset Status 2 and download fail
Method 1
1.Disconnect the cable and take out the battery after some seconds insert back
2.Press and hold both the power button and the volume down and hold until LG logo appears release the buttons and immediately press and hold both buttons again to go in Factory Reset
3.Choose Yes, then Yes again, the phone will reboot
Method 2
1.In step 7 where we are setting up the FlashTool change the action mode to Board DL instead of Upgrade DL
2.When the flashing is done your phone will reboot to the AAT Screen
3. Hold down power button and press normal boot (+power) your phone will reboot. (dont forget to disconnect usb cable or close the FlashTool)
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Install LG Drivers from here : https://sourceforge.net/projects/avicohh/files/Android/LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe/download
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Try installing the driver when you are in download mode or try other ports in your computer.If it still doesn't work try this driver http://oceanhost.eu/x1b0tjlhzw1z/LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe.htm
May the stock ROM work with h500f ?
Geralt1232 said:
May the stock ROM work with h500f ?
Click to expand...
Click to collapse
Nope
is this v10a? which ROM can be rooted and TWRPed?
xd
as I can install the KDZ I have the LG H502G And not catch any of that model Dll !! Help!!
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
You have to enable "Show hidden devices"
I lost data connection often when playing games or using any app can this problem solved by installing stock rom again? Plzz tell me the solution
Trying to get rid out TWRP
If I ever flash stock firmware, does custom recovery/TWRP be removed ?
yes.it will be replaced with stock...
Sent from Valhalla
Lg magna
My lg magna is not booting.
I tried installing a custom ROM it showed that it was done but its not booting now. Its not even booting to recovery mode. I've not tried flashing the a ock ROM but will it work.will it boot in download mode?
go to view option appear on that window and click on 'show hidden devices'
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Reply::go to view option appear on that window and click on 'show hidden devices'
Hello, I have the following problem. As in every other thing ive done to this phone (root, installing twrp, installing xposed) I always thought my model was LG-H502F. Though, my model is LG-H500F, I bought it from Greece, I recently bought Huawei P8 lite 2017 for myself and I gave my old LG to my father, he tell me that sometimes it lags and he is right. I think it lags because I uninstalled Xposed (flashed the uninstall zip using twrp) and also removed root, because he didnt need those things in his phone. The question is: Is there somewhere I can get the stock LG-H500F zip and what guide should I use? Ive been searching for a while now and can't find many topics related to LG-H500F. Thanks
Aneom7331 said:
Hello, I have the following problem. As in every other thing ive done to this phone (root, installing twrp, installing xposed) I always thought my model was LG-H502F. Though, my model is LG-H500F, I bought it from Greece, I recently bought Huawei P8 lite 2017 for myself and I gave my old LG to my father, he tell me that sometimes it lags and he is right. I think it lags because I uninstalled Xposed (flashed the uninstall zip using twrp) and also removed root, because he didnt need those things in his phone. The question is: Is there somewhere I can get the stock LG-H500F zip and what guide should I use? Ive been searching for a while now and can't find many topics related to LG-H500F. Thanks
Click to expand...
Click to collapse
https://lg-firmwares.com/lg-h500f-firmwares/
just find the country you are in.
I found this page earlier but can you import the kzd file to LG Flash tool? I didn't test this but, I guess it works. Thanks for replying
Aneom7331 said:
I found this page earlier but can you import the kzd file to LG Flash tool? I didn't test this but, I guess it works. Thanks for replying
Click to expand...
Click to collapse
yes. it will )
Hi, I'm in the same situation as Aneom7331, indeed I have a bricked LG Magna H500F and I'm trying to flashing a stock firmware. Where should I put the .kdz file in the lg flash tool 2.0.1.6? Moreover, the .kdz file has not a .dll file together with it, Thanks in advance
Someone have link to stock for h502y?