Have any custom rom for this model guys?
Bootloader crashed / formated
Recently I formatted my Flash with bootloader with SP flash tools. now my phone is not stating while trying with Volumn +/- + Power button. No flash light on while charging phone. No response.
Looking for help.
Related
My device is rooted and the bootloader is unlocked, it was working until today. The phone won't turn on and none of the buttons work (including the reset button and and other combination) When I plug it into the wall the red light doesn't appear, so I don't know if its charging, I can't boot to CWM or flash mode, my PC won't recognize it. I believe this is because I loaded a touch version of CWM via .zip with a non-touch version of CWM.
Warranty Void, service center isn't an option.
Is there a fix or do I have a fancy paperweight?
Try going to bootloader mode manually by pressing volume+ while connecting your phone to the USB. Then since you're on stock ROM, you may flash DoomLorD's kernel.
Tapatalked from my Xperia P
bricked too? qhsusb_mode driver?
Hello
I recently purchased a lenovo k3 note, but it came without any internet browser or gapps. I decided to root the phone and to change the rom. I did both, using the official thread for rooting and i choose the official Lenovo K50-T5 update 1536 (found it on needrom)
Unfortunately, when the phone boot up, i have an error message wich says : unfortunalety, WLAN has stopped. And i can't go any further. I wanted to change the rom again but my recovery changed too, as CWM has been replaced by Lenovo-Recovery. I tried to root the phone again but it doesn't work (i supposed the USB debugging is off and i can't change it)
Any solutions ? Thx
Help
Hi,
I have the same issue - could you find a solution?
Thanks in advance!
I do have a complete command over K3 Note .
Contact me for help [email protected]
K3 Note in Meta Mode not able to root
Hello Experts,
My Lenovo K3 Note went suddenly into Meta mode after my battery completely drained out. When I tried to restart, the only message I get is "Have been in meta mode, long press the power button and the normal boot".
I tried all the possible options with power button and volume keys. Also removed the battery cards, sim. But only message I get is Meta mode. Phone is charging when I plug in the charger. However It is not getting detected in my laptop.
I installed the drivers from the below link http://forum.xda-developers.com/android/general/root-lenovo-k3-note-india-k50a40-t3200875. Still phone is not being detected in my laptop.
Can you please suggest what can I do ?
paliwalb said:
Hello Experts,
My Lenovo K3 Note went suddenly into Meta mode after my battery completely drained out. When I tried to restart, the only message I get is "Have been in meta mode, long press the power button and the normal boot".
Can you please suggest what can I do ?
Click to expand...
Click to collapse
Remove battery, put it back, hold volume up + power button. You will boot into recovery (mine was Chinese).
First option should be reboot to system I think, use that.
Recovery boot loop
Hi can anbody please help with this problem. Heres The link to a short video i made. Thanks in advance. Looks like i can't post link till 10 posts
My lenovo k3 note switching on flash light automatically for incoming messages how to stop it
hello,
I flashed my gionee m2 using SP_Flash_Tool_v5.1524 ( format all + download, also tried firmware upgrade)
Gionee M2 JB 4G 0101 T5163
it showed success.
when I connect my gionee m2 (4gb) to a computer using usb, it is in boot loop.
it shows the gionee logo and restarts itself.
when I remove the usb, it still continues the boot loop.
I remove the battery and the power goes off.
Then, I click the power button and it doesn't power up.
I click volume down + power button, it doesn't power up.
I click volume up + power button, it doesn't power up.
I charged it for more than an hour. So, I think there is charging in the battery.
I replaced the recovery.img with carliv recovery
http://forum.xda-developers.com/showthread.php?t=2703141
and flashed again using sp flash tools (format all + download)
it showed green ring.
I tried again to power on, no response.
when I connect to USB, it powers on and starts boot loop
please suggest how to recover from the boot loop and make the phone working again.
Thanks
ravikum said:
hello,
I flashed my gionee m2 using
Gionee M2 JB 4G 0101 T5163
it showed success.
when I connect my gionee m2 (4gb) to a computer using usb, it is in boot loop.
it shows the gionee logo and restarts itself.
when I remove the usb, it still continues the boot loop.
I remove the battery and the power goes off.
Then, I click the power button and it doesn't power up.
I click volume down + power button, it doesn't power up.
I click volume up + power button, it doesn't power up.
I charged it for more than an hour. So, I think there is charging in the battery.
please suggest how to recover from the boot loop and make the phone working again.
Thanks
Click to expand...
Click to collapse
try flashing another stock ROM (there are many versions)
Replace the recovery.img in the stock ROM folder with the CTR (carliv recovery)
then use SP Flash Tool v3.1344.212 and flash ur phone
obviously you''ll lose all the the /system and /data partitions (any existing data)
there are various tutorials in the gionee m2 sections to see how to flash stock rom
http://firmwarefile.com/gionee-m2 -> get firmware from here
http://forum.xda-developers.com/showthread.php?t=2703141 -> carliv recovery
https://www.youtube.com/watch?v=5CxDF2pkdCQ -> fllashing from SP
Hi, thanks for your reply.
can I use latest sp flash tools instead of SP Flash Tool v3.1344.212 ?
you can use the latest version, when i flashed my M2 (8gb, stock rom) with it, it worked perfectly, but its HIGHLY recommended that you use SP 3.1344
Hello,
While trying to unlock and root, I bricked the phone - as in its just staying at the Sony Xperia boot screen. Its still responding to Vol up+Power button to restart. The notification light turns red then green when using Vol down + attach USB.
This is what happened
1) Unlocked and Rooted the device, installed TWRP
2) Took back-up with TWRP
3) While wiping cache, system, etc. to prepare for installing custom ROM, also selected Internal Storage: and chose wipe and restart
Now phone is stuck at the Boot screen, tried the following
- Flashtool: Can install new kernel, but giving error when trying to install stock firmware
- ADB: Doesnt show up in the list with "adb Devices" command
- Sony Companion: Get stuck during software repair on the boot screen. On pressing Vol up+Power, the notification light turns on and stays blue.
- Sony EMMA: Recognises IMEI but says the phone is locked
Is there anyway to sideload TWRP or any other options of flashing stock firmware?
Many thanks in advance.
With Flashtool, Are you try to flash 4.4.4 stock firmware?
Thanks. It worked. Also realized that had to unlock again using flashtool
Hello,
I wanted to flash TWRP into my Z1 C6903 so I downloaded latest TWRP img with official TWRP app and tried flashing it with RASH - Flash tool for Android. The tool stated that the flash was successful so I proceeded to reboot into recovery with the same app. The phone immediately shut down and wouldn't boot back up to neither Android or recovery. It would vibrate once when holding the power button, holding power + volume up would do nothing and phone would not be recognized by PC and even plunging it into wall would do nothing. I tried disconnecting the batter, plunging it to wall and connecting the battery back on which only made LED blink red and device still be not recognized by PC. Can someone help me how to unbrick my phone?
Thank you.
UnsuccessfulScreenRepair said:
Hello,
I wanted to flash TWRP into my Z1 C6903 so I downloaded latest TWRP img with official TWRP app and tried flashing it with RASH - Flash tool for Android. The tool stated that the flash was successful so I proceeded to reboot into recovery with the same app. The phone immediately shut down and wouldn't boot back up to neither Android or recovery. It would vibrate once when holding the power button, holding power + volume up would do nothing and phone would not be recognized by PC and even plunging it into wall would do nothing. I tried disconnecting the batter, plunging it to wall and connecting the battery back on which only made LED blink red and device still be not recognized by PC. Can someone help me how to unbrick my phone?
Thank you.
Click to expand...
Click to collapse
Magic keys for booting to recovery are either:
Hold Vol down and power
release Power when device vibrates, keep holding Vol down
hold Vol down until in recovery
Or:
Power on
if LED blinks press Vol up
If that shouldn't work there's fastboot (only with bootloader unlocked before) or sony flashtool. Just flash latest sony firmware and you should be fine.
There are enough threads concerning this
115ek said:
Magic keys for booting to recovery are either:
Hold Vol down and power
release Power when device vibrates, keep holding Vol down
hold Vol down until in recovery
Or:
Power on
if LED blinks press Vol up
If that shouldn't work there's fastboot (only with bootloader unlocked before) or sony flashtool. Just flash latest sony firmware and you should be fine.
There are enough threads concerning this
Click to expand...
Click to collapse
That doesn't work, the phone doesn't respond to any inputs from buttons.
UnsuccessfulScreenRepair said:
That doesn't work, the phone doesn't respond to any inputs from buttons.
Click to expand...
Click to collapse
Then Flashtool is your friend. You have to reflash the Sony Software.
https://developer.sony.com/develop/open-devices/get-started/flash-tool/