Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
dai123 said:
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
Click to expand...
Click to collapse
Is it possible you flashed the wrong FW? After flashing was the tab able to reboot?
Try wiping cache and do a factory reset. Volume-up+powerbutton. You will see in the middle of the screen a little triangle. Then push the volume-up button again. Then you will be in the recovery-mode. There choose wipe/cache and the wipe-data/factoryreset.
If that not helps try flashing another FW. The Rot-hammer i.e.
Fixed it!
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Question
dai123 said:
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Click to expand...
Click to collapse
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
unanony said:
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
Click to expand...
Click to collapse
please tell me what firmware you flashed...please im stuck and depending on what firmware i flash i can hear it start but still blank screen
Same black screen
I can get Odin to recognize my tab, windows 7 can see it and I can flash to it, but the screen is black all the time.
Has anyone had any luck?
What do samsung use to fix this? I've seen a repair/service program from ZTE for some of their devices that I believe was procured from an employee of ZTE. Maybe there is something like that around?
<edit>
I also flashed a rom from samfirmware, so I guess the issue is a locked bootloader from a stock rom. Anyone know how to fix this?
I too am having this issue with sawfiremware image.
i can can tell i am in download mode but i am unable to flash the EA24 firmware.
Anything that can be done?
Thank you!!
My Tab's screen won't turn on at all, even when plug-in, even that Odin said that flash was successful. But after connecting it to PC with Odin opened (Odin recognized it), loaded all files needed for flash in Odin, I pressed HOME+Volume Down + Power, the device auto-dismounted from PC, and reconnected again, I pressed start in Odin and after finishing updating firmware, the screen was working again.
Good luck to everybody! I'm happy now
what firmware did you use? thx
HELP
hello guys i have the same problem can you please help me out on how to fix it?? my screen is black and i only have the 4 white buttons up, please i need some serious assistence
Blank Screen after installing firmware same firmware
hey guys, could you lend me some help here , my tablet is samsung galaxy tab 7.0 Plus , i installed android 4.12 jelly bean , but it was 3.2 honeycomb before i upgraded to 4.12 jelly bean ,well , i'm proud of it , its smoother then the honeycomb but after a few months , my tablet suddenly just displaying a samsung logo for .... forever .. i downloaded the firmware from samsungupdate.com and i probably understand it's because the rom , i flashed the rom using Odin 3,07 with 4.12 jelly bean firmware that for indonesia region , here's the version of the firmware that i flashed to my tablet "P6200XXMD6_P6200OLBMD5_P6200XXMC3_HOME.TAR.MD5 " please note that my tablet can't open/show the recovery system , it just went black when i went to recovery system , soo i just flashed the rom again , it's because the tablet just showing samsung logo forever , never goes to window , and i flashed the rom with similar firmware but not for the indonesia region , the international one , andd after i flashed , it successfully install the same firmware ( 4.12 jelly bean ) well , it's fix the frozen samsung logo , but after it's showed the samsung logo , it just showed a blank screen of dead , the installazation is success but not fixed my tablet , well i still cant open the recovery mode, it's just showed a blank screen just like before i flashed the same firmware , PLEASE help
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
priyana said:
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
wut ?? isn't this the galaxy tab forum ... it thought i can ask a question here , but thanx anyway
Yeah. Galaxy Tab. You know, the 7" original. GT-P1000. Not at galaxy tab.
Sent from my GT-N7100 using XDA Free mobile app
Hello Everyone, I'm from Nepal. I have also same problem after few days. I search in google and YouTube also but not solve my problem. then i use my technical ideas on SM T561 tab, and I'm Shocked its open and working properly. if you also want to do that plz download Miracle Thunder 2.82 and Odin. install Miracle thunder and open, connect your Samsung tab with pc or laptop, on Miracle Thunder choose Samsung button, scan you Samsung port, model> Auto detect, mode > download, then select factory reset and click Go and wait. now your tab download mode then go to Odin and flashing your Samsung tab original firmware from website and flashing your tab. 100% its work. Thank you and sorry for my poor English.
https://www.facebook.com/softktm
Hello All mastah....
anyway, sory before my english is very bad and I know, may be i was wrong section post in this room....but i really need help.
I have galaxy ace plus GT S7500 going dead brick n not detec to PC after instal ATOMIC rom and OC (over Clock)
I've been trying to fix it with box flasher RIFF JTAG to unbrick.....
Now my device already detec on PC n want tobe ON....but the problem is a blank screen and vibrating always when i was try to download mode and cannot to flash with ODIN
Please mastah...help me.....:crying::crying:
The pc detects your device, but does odin recognize your phone?
ompew said:
Hello All mastah....
anyway, sory before my english is very bad and I know, may be i was wrong section post in this room....but i really need help.
I have galaxy ace plus GT S7500 going dead brick n not detec to PC after instal ATOMIC rom and OC (over Clock)
I've been trying to fix it with box flasher RIFF JTAG to unbrick.....
Now my device already detec on PC n want tobe ON....but the problem is a blank screen and vibrating always when i was try to download mode and cannot to flash with ODIN
Please mastah...help me.....:crying::crying:
Click to expand...
Click to collapse
I'm not sure if you already tried this:
Remove batery
connect phone to pc
put phone in Download mode (while the battery is still removed.))
Flash with ODIN.
Are you able to get into recovery mode ?
ompew said:
Hello All mastah....
anyway, sory before my english is very bad and I know, may be i was wrong section post in this room....but i really need help.
I have galaxy ace plus GT S7500 going dead brick n not detec to PC after instal ATOMIC rom and OC (over Clock)
I've been trying to fix it with box flasher RIFF JTAG to unbrick.....
Now my device already detec on PC n want tobe ON....but the problem is a blank screen and vibrating always when i was try to download mode and cannot to flash with ODIN
Please mastah...help me.....:crying::crying:
Click to expand...
Click to collapse
Sorry bro, your Ace+ is now RIP. I used Smniller (or someone spelled equivalent to this ) no my Mini and Ace before. Theyre still dead
Sent from my GT-P1000 using xda app-developers app
The Ace+ is a lot more sensitive to ROM flashes, and it bricks easily.
Yes, your phone is now dead. You can send it off to Samsung for repair - just say it died whilst it was charging. DO NOT TELL THEM YOU WERE FLASHING WITH ODIN.
I just bricked my Samsung Galaxy Ace Plus after installing http://forum.xda-developers.com/showthread.php?t=1764341
The phone wont turn on, wont charge, wont do anything anymore. My samsung has died...
hello, my phone is bricked too...
its just vibrating..
i tried removing battery n connecting to pc while holding buttons for download/ recovery mode but both modes appear for few seconds..
say only for 10 seconds n then odin dsnt detect my phone..
can you help plz???
Hello people. I have galaxy mini and it is brick.
My problem is same with this www . youtube.com/watch?v=VppXy6_1sAw&feature=related
can any one help me ?
When i flash with odin the problem is still here ?
Thank you !
lichky said:
Hello people. I have galaxy mini and it is brick.
My problem is same with this www . youtube.com/watch?v=VppXy6_1sAw&feature=related
can any one help me ?
When i flash with odin the problem is still here ?
Thank you !
Click to expand...
Click to collapse
This is probably caused by you flashing a rom that is not meant for Galaxy Mini. Since you can get into download mode (as shown in video), you can just plug your phone into the computer while in download mode, flash stock firmware for Galaxy Mini via ODIN.
Here is a list of stock firmwares:
http://yagyagaire.blogspot.sg/2012/01/official-samsung-firmwares.html#.UGqOuU3MiSo
Also, note that since your phone can be turned on, it's not a brick. It's only a brick when it doesn't get turned on.
hi, i cant find solution anywhere so I came here to hear the experts opinion , I get a samsung galaxy s3 mini GT-i8200L and after some time get the boot loop problem , when the samsung and model shows , the cellphone vibrate and restart , but now i tried to install the stock rom and them the cellphone says "firmware upgrade encountered an issue. please select recovery mode in kies and try again dont stay in download" :crying: but the download mode doesn't last even a SEC to load another firmware with odin , so if someone could help me It would be great , thanks and sorry for my bad grammar...
Madness_logic said:
hi, i cant find solution anywhere so I came here to hear the experts opinion , I get a samsung galaxy s3 mini GT-i8200L and after some time get the boot loop problem , when the samsung and model shows , the cellphone vibrate and restart , but now i tried to install the stock rom and them the cellphone says "firmware upgrade encountered an issue. please select recovery mode in kies and try again dont stay in download" :crying: but the download mode doesn't last even a SEC to load another firmware with odin , so if someone could help me It would be great , thanks and sorry for my bad grammar...
Click to expand...
Click to collapse
sounds like a faulty power button. change that and you will win.
Madness_logic said:
hi, i cant find solution anywhere so I came here to hear the experts opinion , I get a samsung galaxy s3 mini GT-i8200L and after some time get the boot loop problem , when the samsung and model shows , the cellphone vibrate and restart , but now i tried to install the stock rom and them the cellphone says "firmware upgrade encountered an issue. please select recovery mode in kies and try again dont stay in download" :crying: but the download mode doesn't last even a SEC to load another firmware with odin , so if someone could help me It would be great , thanks and sorry for my bad grammar...
Click to expand...
Click to collapse
Is it rooted? If not then send it to Samsung for repairs
hello guys i wish u respond me and help the fast u can sorry for my bad english .
so i got samsung ace gt-5830 and i tried a custom rom called clockworkmod recovery then i cant go to recovry mode because its blue screen so i tried to flash it i lost the os so i used odin to flash it but i cant because it says driver uninstalled but when its stuck in loading screen i can find the driver and odin add it so guys pls help me to find out a solution cause its my brothers phone and i just bought it for him