Related
I picked up a SGT from Verizon and am having trouble with bluetooth. It won't pair with either a Jabra or Motorola brand headset. I can get it to pair with my Apple Bluetooth keyboard, but it won't connect. It just says "Paired", but does not function. I'm using Skype and GV on this and would love to be able to use a bluetooth headset. Is this unique to the Verizon model? Has anyone else had better luck with a T-Mobile model?
Thanks!
Apparently vzw left the bluetooth HID out (unlike tmo). So the vzw tab can pair with keyboards and mice, but cannot connect to them. There are hid drivers in the market, but I haven't tried any yet. I have a bt keyboard on order. I tried a mouse,it paired fine but wouldn't connect. There have been many reports of this.
BT headsets haven't had any issues that I have heard. My moto s9hd paired and connected the first time and has been ready whenever I have needed it.
r
I have the T-Mo version and I can connect and pair BUT...
Audio from the other person plays through the BT headset and your voice is via the Tab's microphone... I put the Tab in another room and made a call and all the other person could hear was the TV in the other room.. Once I walked back and picked up the Tab they could hear me...
TMO Profiles?
I have a Sprint Tab and it pairs but refuses to connect. I'm wondering if there's some way to extract the TMO drivers from the device, and stick them elsewhere. Also, I don't know a lot about the bluetooth driver architecture. What exactly is it missing? The kernel drivers for it? Or some other thing?
I had the same trouble with my Jawbone and Think Outside stowaway keyboard.
I called Verizon about this and the tech told me they had no profile for headsets or HID. They have stereo headphone support for music.
Very disappointing that they would do extra work to remove functionality, but I'm certain a good rom will become available that fixes this Verizon blunder.
Sent from my SCH-I800 using XDA App
What I'm reading is that Android doesn't actually support BT HID in this release. I'm still wondering if it could be extracted from TMO or some of the European releases and pushed with ADB.
The other thing I'm wondering is about CyanogenMod. They've had an experimental bluetooth HID thing that's been working decently, or so say the posts, for a few months now. I'm wondering if it's a high enough level of abstraction that it could just be put variously on any device, as long as the processor architecture was the same (or is it up in the java level so that doesn't even matter?)
I know nothing, to be honest, but wanted to just advance a few questions. Not sure how many people are actually interested in BT HID, but for me, it's a dealbreaker for whether or not I hand this device back in.
I've had the same problems with my Verizon SGT. Verizon apparently deleted some Bluetooth drivers. Why? I don't know. This is the only problem I have come across with my tab. If anyone knows of a driver that will connect Bluetooth devices to the SGT please reply. I would greatly appreciate it. Thanks
Nexus 7 Head-unit Install
Hi all, long time reader, first time poster. I'm working on a Nexus 7 Car Head-unit install, and figured I would post my working through the install, hardware, software, and kinda just help all the tons of people I see out there who have the same idea, but just have no idea how to go about it.
This is ment to be half a tutorial (once everything is done) and half a brainstorming to give me idea's for things I haven't thought of or considered. I'll be coming back and updating this OP with pictures, and the build as it gets worked on.
Goals of the Install
I want to be able to run my entire car off the Nexus. I have already set up wifi tethering from my S3 to get internet into the Nexus, and thus open up a realm of possibilities. Necessary features are Nav, and Music. I rarely call from my car, but in car calling would be a nice feature to have as well. I also go out to the track ever now and again, and adding car stats (boost, RPM logging, acceleration, mapping) would be great. The biggest reason to do the install is that one the hardware is configured, you literally have a ultimately customizable setup that will take years to outdate.
The Hardware
1 x 2003 Subaru WRX
1 x Nexus 7
1 x Samsung Galaxy S3 (T-Mobile)
1 x MRX-V60 - Alpine 5-Channel Subwoofer Amplifier
1 x 7 Channel Equalizer
lots of hacked wiring
The Software
This is where I would love some feedback on on what I may be missing, better solutions to what I have suggested, and just some general awesome idea's!
Music:
Pandora, Play Music, DI.fm, Soundcloud, Radio.com
In Car Phone/Text:
Talkatak, Google Voice
OBDII Support: (Future Project)
Right now this is not a nessiacty as the hardware to do this could get very tricky. However I know I can read from the OBDII port with a bluetooth OBDII dongel and an app like Torque Lite. However I do own a tatrix cable, and am considering if it would be possible to go from the USB to the tablet, and find an app/write one what allows for the tablet to control the car in real time.
Nav:
Google Navigation, Local
Track Apps:
aLapHD
The Two Builds
There are two ways to go about this. The first would be the simple and easy way which is to hack together a charger wired to the power source of the car, and use that to keep the tablet charged. Then run a 3.5mm audio into the amp, and have sound run from there. There are a few issues with that. 1. There will be no volume control, as the Tablet's buttons will be part of the center console. I suppose I can run a controller to the amp, that will let me adjust volume. 2. This will not allow for the possibility of adding OBDII support.
The second option is to purchase a micro USB dock that does audio out. Hack it apart, and run the audio to the amp, and the power to the power. This would be necessary if I want to do a full USB ODBII connection (I believe, please tell me if I'm wrong), and would be much "cleaner" when it comes time to take the tablet out of the car for any reason (hardwire sync, parking in the "ghetto").
What I need Help with
Have any idea's. Tried something similar and have some tips. Have suggestions for apps, hardware configurations I haven't listed, or just generally want to say "sick man". Please let me know. I would love to have some people who are also interested in doing this join in on my build, and we can work together to eliminate any issues to make tablet installs easier. I will be coming back and updating this OP throughout the entire process so please look for updates!
Thanks All!
(reserved for pics)
Check out a half-DIN equalizer or crossover to solve your volume, fading, equalizing concerns... can't post a link because this is first post!
I'd like do do this in the future... I hope someone comes out with a custom set of apps that make this really cool and easy... maybe even a custom ROM.
Basically what I'd want out of this is:
Auto-on with power. Auto off after 10 minutes of no power. FM radio tuner. Maybe the ability to connect a rear-view camera (wifi?). Bluetooth OBDII would be good enough for me.
I'd also appreciate the ability to connect to at least one camera and use it as a DVR, but I think that it would probably be beyond feasibility with the Nexus 7...
What I really want to see is the ability for the Nexus to be a full Bluetooth head unit. I want it to pair with my phone for both internet (already do this, works great) and have it act as a headset essentially. This is the part that appears to not exist anywhere. The ability for the Android Tablet to act as a hands free device. I mean if a car stereo can fully integrate with your phone read your address book, start and answer calls hands free, stream music, everything from your phone then why the heck not the tablet! Someone needs to write the BT stack that can handle that. Apparently it doesn't exist for android. It exists for Windows, but not Android. That is just wrong. Are there any car stereo head units running Android as their OS? If so can someone dump their rom so we can see what all it can do for a project like this?
I really want this!
I have had mine in the dash for a couple weeks now, streaming Bluetooth to the radio which I relocated, also using NFC sticker to turn on WiFi, bluetooth , set audio volume, screen brightness and start playing music. Tasker to put unit into car mode, its sick! I'll be following, really interested to see what you come up with. My car is N 06 altima and the Nexus 7 fits almost like a glove where factory stereo use to be.
Nexus 7 in altima
sneakk said:
I have had mine in the dash for a couple weeks now, streaming Bluetooth to the radio which I relocated, also using NFC sticker to turn on WiFi, bluetooth , set audio volume, screen brightness and start playing music. Tasker to put unit into car mode, its sick! I'll be following, really interested to see what you come up with. My car is N 06 altima and the Nexus 7 fits almost like a glove where factory stereo use to be.
Click to expand...
Click to collapse
Hi!
Can you upload a picture of your install? I own a altima and I am looking to install the Nexus 7 on my dash as well. And also, did your factory stereo have bluetooth? If not, what are you streaming bluetooth to?
Thanks
Just gonna subscribe as I thought of doing something similar
Sent from my LG-E739 using Tapatalk 2
Look into this thread
http://www.mp3car.com/worklogs/152658-nexus-7-android-in-a-2001-audi-s4.html
here's a video also
http://www.youtube.com/watch?v=EdLi9wCFZ7M
timskyline86 said:
Look into this thread
http://www.mp3car.com/worklogs/152658-nexus-7-android-in-a-2001-audi-s4.html
here's a video also
http://www.youtube.com/watch?v=EdLi9wCFZ7M
Click to expand...
Click to collapse
If anyone can post on his site, tell him to connect two middle pins in usb plug, then it will start charging from the lighter socket.
Sent from my HTC Sensation Z710e using Tapatalk 2
Does anyone know of a micro USB dock/cable that then splits to power, usb, and audio? I know of one's that will do 2 of the three, but nothing that does all three. Maybe just a USB and power one, and run the audio straight out of the 3.5mm on the N7.
Amp was ordered, and will be here next week. Prelimanary fitment pics coming soon...
Hello, I'm considering permanently mounting a nexus 7 in my car. It seems like the perfect in car device.
With this in mind I have updated my CarHome Ultra app to better accommodate the Nexus 7 screen. I will be posting a new video soon showing it running on the 7.
I've looked at doing this as well, I've always been prevented by the issue of the FM radio. I use the car a lot in places where I get no or poor connection via the phone, but the radio works fine, so loosing it would not be an option as I use the FM radio quite alot.
I've been trying to figure out away to control an FM radio via the Nexus so if anyone out there has any info it would be greatly appreciated.
Jonnym
Jonnym said:
I've looked at doing this as well, I've always been prevented by the issue of the FM radio. I use the car a lot in places where I get no or poor connection via the phone, but the radio works fine, so loosing it would not be an option as I use the FM radio quite alot.
I've been trying to figure out away to control an FM radio via the Nexus so if anyone out there has any info it would be greatly appreciated.
Jonnym
Click to expand...
Click to collapse
Load a hand full of mp3s on the device. Then use Tasker to switch to switch to your favorite music player when reception is bad
Sent from my LG-E379 running ICSyndicate 2.0
I am actually currently doing a very similar project with a Nexus 7 and my Nissan 350z
I am planning on installing the Nexus 7 inside my dash (to replace sat nav dash)
HOWEVER
what about routing the power button on the tablet? Because If you cant access the power button the tablet will only get power when the car is on and if you dont use the car for a day or two the tablets battery would go flat and next time you turn on the car the tablet would go into charging mode (screen with charging battery only) and not boot up into android jelly bean.
Theres 2 potential solutions:
1. Open the tablet and wire the power button to a custom one, however on opening it I have found the button is actually a physical push press button and cannot be wired.
2. There is potential to change a file on the android system to tell the tablet to boot up when a charger is plugged in, check these threads:
http://forum.xda-developers.com/showthread.php?t=1187631
http://forum.xda-developers.com/showthread.php?t=1815131
Any updates from the OP?
Here's my install. Kept the factory radio intact, if not using the nexus, everything looks totally stock.
http://forum.xda-developers.com/showthread.php?t=1847452
regalpimpin said:
Here's my install. Kept the factory radio intact, if not using the nexus, everything looks totally stock.
http://forum.xda-developers.com/showthread.php?t=1847452
Click to expand...
Click to collapse
What OBD ll connector are you using?
tallyforeman said:
What OBD ll connector are you using?
Click to expand...
Click to collapse
xitech xr7 purchased off amazon over a year ago.
http://www.amazon.com/XiTech-ELM327...TF8&qid=1347466620&sr=1-3&keywords=xitech+xr7
Never had any problems with it.
Despite working in the car industry and loving gadgets and mod-ing...I haven't really seen what people are up to these days in terms of car mods. The Nexus 7 makes so much sense and looks great!
Hey all
Just to add to the discusion;
Radio/DAB
Frontier silicon are the only company that I can find that do an app that can control an external radio and stream it's signal to the tablet as opposed to picking up the signal over the cellular network.
App:
Their page
http://www.frontier-silicon.com/products/software/DOK_App.html
Play store
http://tinyurl.com/d24gwm4
Module:
http://www.frontier-silicon.com/products/modules/briefs/Venice6_PB.pdf
now the problem with this is, aside from building the module in somewhere' the audio out as it feeds out of the module, but I was thinking I could use some form of y split cables near to my amps 'in'.
Media storage and playback
As far as storage for everything video/audio atc and a player to match I was thinking of useing xmbc
http://xbmc.org/
andriod port;
http://forum.xda-developers.com/showthread.php?t=1813089
and pairing this with a WiFi DLNA HDD that I would wire in remoted off (say in the boot)
GPS
For improved gps I was going to use an external bluetooth gps reciver then allow mock locations on the tablet, there are also a few apps that help with this.
This app seems to have good support and a nice help page.
App:http://tinyurl.com/a9s7gvo
An example of a external GPS receiver
http://tinyurl.com/a339vu7
Hands Free
The only work round I seem to have found atm though far from perfect is this
http://www.scosche.com/consumer-tech/product/1919
it allows you to to 'cut in' the audio stream, but (can't fins the tread now will keep looking) the guy who was playing round with this was having audio issues.
not an idea solution but workable.
before my mind starts melting again;
How I plan to implement the tablet is to use tasker to wake the tablet when power is supplied then shut of down after, if I disable all kinds of connectivity when tablet shuts down then reactivates when it wakes up everything should run smoothly. Power will be cut because I'll wire in the ignition live, like you do in a stereo anyway, an this shouldn't put a drain on my battery to much, an if the dash build is good it shouldn't be too much of an issue extracting the tablet to hard boot anyway.
Volume and Audio
Volume and audio quality is another issue that needs to be addressed.
http://tinyurl.com/d2zbbnf
Seems like an ok work round.
Another way would be to install a direct in-line volume control as suggested in other threads, and put in an external DAC or hardwired EQ.
On a side note I came across this........ http://www.crutchfield.com/p_773AIRDAC/NuForce-Air-DAC-Receiver.html?tp=59282 ........ although you need to use their plug in senders but I'm sure this can be worked round with the knowledge on this forum, an would provide a very nice solution. then again there are quite a few bluetooth devices around. this probably wouldn't allow for in-line controls though.
well thats it for now, hope this helps push this forward to a working system
ben
nice build thread containing alot of theses ideas;
http://www.mp3car.com/worklogs/152658-nexus-7-android-in-a-2001-audi-s4.html
Hi All,
I have an AT&T Nexus 6 and I am trying to stream USB audio out to my car stereo. When doing so I am hearing clicking and popping in the audio. I thought it was possibly a ROM/kernel issue but I am fully back to stock & locked and the problem still exists. Audio via mini stereo jack (aux) works fine of course, as does sound coming out of the phone's speakers, headphones, etc. I have tested 2 other android devices (Nexus 4 and Samsung Nexus 10) and USB audio is working perfectly fine in my car.
If anyone has any guidance on how to troubleshoot this it would be great. This is strange to me as USB audio out was added as a software update, so I find it very odd that it works on my older devices and but not the N6. If I can't get this figured out I will have to schedule an appointment at an AT&T warranty center to likely exchange my 35-day-old phone for a fecking refurb
Thanks for any help guys, cheers!
I RMA'd my Nexus 6 and the replacement behaves the exact same way. Other non-Nexus 6 devices tested work just fine.
Has anyone actually used streaming USB audio other than me?
rbross3030 said:
I RMA'd my Nexus 6 and the replacement behaves the exact same way. Other non-Nexus 6 devices tested work just fine.
Has anyone actually used streaming USB audio other than me?
Click to expand...
Click to collapse
What app are you using to stream? I tried, but do t know if my radio wont accept it or not. I know I can't read movies from my phone or flash drive.
Sent from my Nexus 6
Casper34 said:
What app are you using to stream? I tried, but do t know if my radio wont accept it or not. I know I can't read movies from my phone or flash drive.
Click to expand...
Click to collapse
The idea behind USB audio streaming is that you don't need to use an app. The device streams any and all audio out of the phone via USB rather than out of the speakers. This means that you can use Spotify, Youtube, Pandora, PlayerPro, etc. while connected to your car stereo via USB and have the audio in your phone played through your car speakers in lossless digital. This is a feature that was introduced in Android 4.4 but seemingly is saught out by nobody but me.
Prior to USB audio out, these were common options/solutions, all with drawbacks:
1. Plug into the headphone jack which is an analog signal prone to noise, interference, and muddy EQ.
2. Plug into USB and Android will automatically mount your phones sdcard partition the same way as USB thumb drive. This only works for playing media files that are saved directly to the phone. All other sounds/apps do not work through as the phone's audio hardware is not being used. This means no Pandora, Spotify, etc. and no controlling music from the phone. Casper, your radio is probably trying to mount your N6 this way – most car stereos do and are not expecting have a device connected that is outputting its own hardware-driven digital audio stream.
3. Bluetooth. This was the best solution as it uses the phones audio hardware and thus all audio is output the same way as the new USB out feature. The drawback to this is that bluetooth uses lossy-compression and so is lower fidelity than option #2, though A2DP has made quality far better than it once was.
If you can't already tell, I'm sort of a fidelity nazi and this is why I'm so desperate to find a solution to this issue at hand with the Nexus 6 USB audio out that noone seems to know exists.
Any update on this? I just got my Project Fi Nexus 6 and I am regretting not doing more research on the USB streaming in the car. The iPhone 6 worked flawlessly and I could change songs with my car (I just lacked good service). The car usb won't even recognize my google play albums downloaded to my phone BUT it will pull up my zedge ringtones. Every time I try to fool around with it, it just keeps looping my Mario ringtone through my car speakers lol. But seriously, any suggestions. I am so desperate.
ericajm85 said:
Any update on this? I just got my Project Fi Nexus 6 and I am regretting not doing more research on the USB streaming in the car. The iPhone 6 worked flawlessly and I could change songs with my car (I just lacked good service). The car usb won't even recognize my google play albums downloaded to my phone BUT it will pull up my zedge ringtones. Every time I try to fool around with it, it just keeps looping my Mario ringtone through my car speakers lol. But seriously, any suggestions. I am so desperate.
Click to expand...
Click to collapse
I gave up and went with using bluetooth. Cost me another $120 in bull**** hardware that Grom Audio sells to make this "upgrade" possible. Quality is **** compared to what it could've been as well... sigh... first world problems
I have a Grom USB2 and a Galaxy S4 that I just upgraded from 4.4.1 to 5.0.1 (Goldeneye ROM). I successfully streamed USB with KitKat (Grom has a configure file that enables their unit to do this) but have been unable to do the same thing with Lollipop. I did the *#0808# thing and tried several settings but nothing has worked. Any ideas?
Has anyone else tried using USB audio out on the Note 5, and if so, is it working for you? I've got a Fiio E18 and the audio is slow and garbled when playing out through the Note 5. Works great on Nexus 5 and PC so I'm assuming it's not the Fiio device.
Hi,
There’s no denying the Galaxy Note 5 is a top-quality phone.Unfortunately, like those phones, it lacks a number of features such as a removable battery, USB 3 and, crucially, micro-SD expansion.The other omission is Type-C USB, something the much cheaper 5.5-inch One-plus 2 sports.
Type-C USB has the benefit of being reversible, so you don’t have to guess which way you’re plugging it into the phone. It also has the ability for faster data transfer using USB 3.1 and improved power delivery – something One-plus hasn’t taken advantage of. Apple’s new Mac-book uses it as the main charging port.
TO know more (http://www.trustedreviews.com/samsung-galaxy-note-5-review)
I'm not sure what this post has to do with my question. None of the features you mention are relevant (or for that matter, critical to me). Clearly the Note 5 supports USB audio, but it appears to not work properly.
Still not tested on note 5
TurboniumX said:
Has anyone else tried using USB audio out on the Note 5, and if so, is it working for you? I've got a Fiio E18 and the audio is slow and garbled when playing out through the Note 5. Works great on Nexus 5 and PC so I'm assuming it's not the Fiio device.
Click to expand...
Click to collapse
I am also searching for data on using my Fiio with note 5. I don't have my fiio by hand right now but I want to know if the sound quality is better with Fiio E18, or Note 5`s sound is enough.Once I connected my fiio to my Asus n550 laptop(which has a Realtek audio card), but I couldn't notice any significant difference in sound power and quality. Do the others feel a difference? My headphones are Sennheiser.
PS: have you upgraded your OS to ANDROID 6?
TurboniumX said:
Has anyone else tried using USB audio out on the Note 5, and if so, is it working for you? I've got a Fiio E18 and the audio is slow and garbled when playing out through the Note 5. Works great on Nexus 5 and PC so I'm assuming it's not the Fiio device.
Click to expand...
Click to collapse
My fiio e17 worked great with every galaxy phone from s3 to s6 and note series. E18 should work without any problem with note 5.
Try to find another cable to connect your fiio to note. If this is not helping you try to reset to factory your phone or flash another firmware with odin. Try with other player - I use poweramp and neutron.
BTW. I give up to phone music. My setup now is fiio X1 used only with line out + fiio e12A + sennheiser momentum (over ear, in ear) or HD 598. X1 HAS THE SAME QUALITY AS THE X3K OR X5-2 with line out .
I use the Oppo HA-2 and it works perfectly with Google Play Music. Although, I don't store lossless files on my phone since they're big and you won't hear the difference b/w that and 256kbps+ mp3s out and about.
Just to open with this - I really like this phone and have been enjoying using it. Aside from the fairly poor WiFi range and the flaky NFC it is otherwise a really nice phone. There's just one other issue I have which is extremely frustrating:
I can't use it with my Airpods. Or at least, I can connect it but at some point the sound will crackle and cut off. If I wait it will occasionally crackle and come back on again but will cut in and out in a way that would drive anyone mad. I've tried fiddling with Bluetooth settings in developer options but it doesn't seem to make any difference. I've even tried a factory reset.
The Airpods work absolutely perfectly with every other device - no issues with the iPhone (expectedly) nor the S8, G6 or even my laptop. I can't 100% rule out a fault with the Airpods but given these facts it seems highly unlikely.
I wondered if anyone else used Airpods and had experienced issues and found a solution.
Not too interested if you've had no issues with your device, nor what you think of Airpods - I just want to see if I can get to the bottom of this, or the Nokia will have to go back.
Many thanks
Similar problem
Got a similar problem with my apt-x receiver.
Every few minutes the connection drops for a very short time.
The airpods don't support apt-x, but maybe it's the same problem.
My receiver shows a connection via apt-x, , but you can't find any apt-x support in the Nokia 8 specs.
But I had no problems with a friends portable speaker (non-apt-x).
I went back to cables
damian101 said:
Got a similar problem with my apt-x receiver.
Every few minutes the connection drops for a very short time.
The airpods don't support apt-x, but maybe it's the same problem.
My receiver shows a connection via apt-x, , but you can't find any apt-x support in the Nokia 8 specs.
But I had no problems with a friends portable speaker (non-apt-x).
I went back to cables
Click to expand...
Click to collapse
I’m wondering if the Nokia 8 just has rubbish connectivity, generally. If the Bluetooth chip is part of the WiFi chip then this would figure as it has the worst WiFi connectivity I’ve seen in recent years
Are you running Nougat or Oreo? From what I've heard, a lot of the bluetooth issues have been fixed in Oreo.
leoni1980 said:
Just to open with this - I really like this phone and have been enjoying using it. Aside from the fairly poor WiFi range and the flaky NFC it is otherwise a really nice phone. There's just one other issue I have which is extremely frustrating:
I can't use it with my Airpods. Or at least, I can connect it but at some point the sound will crackle and cut off. If I wait it will occasionally crackle and come back on again but will cut in and out in a way that would drive anyone mad. I've tried fiddling with Bluetooth settings in developer options but it doesn't seem to make any difference. I've even tried a factory reset.
The Airpods work absolutely perfectly with every other device - no issues with the iPhone (expectedly) nor the S8, G6 or even my laptop. I can't 100% rule out a fault with the Airpods but given these facts it seems highly unlikely.
I wondered if anyone else used Airpods and had experienced issues and found a solution.
Not too interested if you've had no issues with your device, nor what you think of Airpods - I just want to see if I can get to the bottom of this, or the Nokia will have to go back.
Many thanks
Click to expand...
Click to collapse
I wonder if yours is wonky, my Wi-Fi is excellent and i get get 75Mbit down 19Mbit up over 5Ghz through 2 brick walls, a floor up and at the opposite end of the house, i have not missed any payments using contactless via NFC and Bluetooth works fine via an Anker Bluetooth speaker and my JBL Bluetooth headphones.
Sorry for digging an old thread, but I still have the same problem even after a bunch of software updates.
My issue with the AirPods is that they do not work after they connect. I take them out of the case, they connect (as expected), but as soon as I start playing something the music/video pauses and the sound switches to speaker (if I press play again it plays out loud). To make them work I need to go to bluetooth settings, disconnect them and connect them again. Then they will work almost flawlessy (minor intrerruption from time to time).
I have no issue with other BT speakers. I also use the AirPods with an iPad and laptop and no issues there.
My Nokia 8 software is up to date. AirPods firmware the same (checked on the iPad).
I tried re-pairing after each software update. I tried changin BT settings (absolute volume - dev settings; contact sharing and HD Audio: AAC) but no improvements.
Any ideas what else can I try?
Search for Oreo and Bluetooth problems. It seams to be a general issue for this Android Version. I have problems connecting my Phone with the car, too.