Database Develop

[Q] Droid 3 possible brick?

Hi guys, I've been trying to send back my Droid 3 to Verizon, but every time I do the 1_click_SBF.exe the Android guy doesn't respond, and I get a "Master Clear error"-Operation Failed.
I think I may of bricked the phone. I get 0 connection to the network, and I also had failed aborted updates to the newest version multiple times and I don't know what to do.
Sorry if this is the wrong place to post this but I am sincerely at a loss.
any help is appreciated
-Ronen91

Which SBF are you using? If you upgraded to 906 the 890 SBF won't work.

I believe 890 it would not let me update to the new software. I originally flashed from 906, and I'm now stuck on a broken 890 sbf.
Is there another way I can install a working sbf and delete all possible signs of root and get it working again?
System Version: 5.6.890.XT862.Verizon.en.US
Model Number: Droid 3
Android Version: 2.3.4
Baseband Version: Unknown
Kernel Version: 2.6.35.7-g5fa4155 [email protected] #1
Build Number: 5.5.1_84_D3G-55
ERI version: Unknown
PRL version: Unknown
I can't dial 611 I can't do anything I get a "emergency calls" No Network is available. Only emergency calls are allowed.
The activation doesn't occur, it just goes straight to a google account creation
So what are my options to get the phone back into condition to send back to verizon?

Can it flash the radio at least?

Android guy doesn't respond,
Click to expand...
Click to collapse
what android guy? phone needs to be in 'AP Fastboot Flash Mode'
this is android recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is 'AP Fastboot Flash Mode'
hold volume down & power, to boot
---------- Post added at 05:07 PM ---------- Previous post was at 04:59 PM ----------
or is error on pc? when you click on the one click exe
did you rename to 1_CLICK_SBF.exe ?

MrObvious said:
Can it flash the radio at least?
Click to expand...
Click to collapse
I don't exactly know what you mean by that
@sd_shadow
No I simply meant by when you begin to activate a new phone you have to touch the android guy to begin activation, it just doesn't respond, and goes to Google log in settings.
The 1_click_sbf.exe file worked fine the first time I did it from the root. The phone and network was working. Once I tried to update the phone to 906 the update failed, and I've been stuck in limbo

http://forum.xda-developers.com/showthread.php?t=1406812

@Shadow
I'm sorry but what exactly am I supposed to follow after the link?
I'm very bad with directions =(

it was a response to
Originally Posted by MrObvious
Can it flash the radio at least?
Click to expand...
Click to collapse
Originally Posted by Ronen91
I don't exactly know what you mean by that
Click to expand...
Click to collapse
instructions on how to flash radio.img are in first post
http://forum.xda-developers.com/showthread.php?t=1406812
and you have tried one click again,
you are wiping data and cache?
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
verifying md5 check sum
---------- Post added at 07:05 PM ---------- Previous post was at 07:04 PM ----------
of one click.exe and update.zip?

@Shadow
Do I need to flash the radio, or are you just telling him you can definitely flash the radio?
Also, I'm currently charging it. How would I go about clearing the cache and wiping the data?
I think I ****ed up big time

if you never wiped data or cache, that is likey your problem or part of the problem
Android system recovery <3a>
with phone off
hold X & power, when you see triangle, !, & Andy, press both volume buttons
then scroll with volume buttons, select with power
---------- Post added at 07:12 PM ---------- Previous post was at 07:10 PM ----------
Ronen91 said:
@Shadow
Do I need to flash the radio, or are you just telling him you can definitely flash the radio?
Click to expand...
Click to collapse
if wiping data, does not help you could try, flashing radio.img
I would verify md5 check sums for one click.exe and update.zip first
---------- Post added at 07:17 PM ---------- Previous post was at 07:12 PM ----------
1_CLICK_SBF.exe?dl=1
md5: 1c6d32e2e54c720daa6bbb3886d15c5c
906 update.zip
MD5 Sum: 8dcb7b93e2b4e4f3f44e99b24faab1ae
it's posted for a reason

I'm so dumb I just did it on my new replacement phone by accident and thought i fixed the issue
/facepalm

[Q]Download recovery.img form androidarmv6

I need the link for download the recovery.img from the site of download.androidarmv6.org. Thanks

Desteroy said:
I need the link for download the recovery.img from the site of download.androidarmv6.org. Thanks
Click to expand...
Click to collapse
CWM 5 is stable and can be used to flash anything other than CM 11 KitKat builds except the KitKat For All while CWM 6 can be used to flash KitKat builds. Here are the links,
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
CWM 6.0.4.6 for Samsung Galaxy Ace S5830
Hope I Helped

mahithm said:
CWM 5 is stable and can be used to flash anything other than CM 11 KitKat builds except the KitKat For All while CWM 6 can be used to flash KitKat builds. Here are the links,
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
CWM 6.0.4.6 for Samsung Galaxy Ace S5830
Hope I Helped
Click to expand...
Click to collapse
I've another problem. http://jenkins.androidarmv6.org/job/cm-ota/265/ i need the link of the recovery in this site

UP

Desteroy said:
UP
Click to expand...
Click to collapse
Which recovery.img need you?... Recovery.img file contains a custom recovery, so do you mean do you need a recovery compatible with android 4.4.x in order to flash CM11??
Maybe this TUTORIAL (POST1 / POST2 Links) help you it contains some Custom Recoveries Android 4.4.x compatible (CWM 6.0.4.7 and TWRP 2.7.0.0), so you can flash CM11 by Androidarmv6 :good:
---------- Post added at 06:46 PM ---------- Previous post was at 06:36 PM ----------
Desteroy said:
I've another problem. http://jenkins.androidarmv6.org/job/cm-ota/265/ i need the link of the recovery in this site
Click to expand...
Click to collapse
Nightly ROMS are constantly updating, so here the links are renewed and stop working from time to time.

Viper The Ripper said:
Which recovery.img need you?... Recovery.img file contains a custom recovery, so do you mean do you need a recovery compatible with android 4.4.x in order to flash CM11??
Maybe this TUTORIAL (POST1 / POST2 Links) help you it contains some Custom Recoveries Android 4.4.x compatible (CWM 6.0.4.7 and TWRP 2.7.0.0), so you can flash CM11 by Androidarmv6 :good:
---------- Post added at 06:46 PM ---------- Previous post was at 06:36 PM ----------
Nightly ROMS are constantly updating, so here the links are renewed and stop working from time to time.
Click to expand...
Click to collapse
I need the recovery of Androidarmv6, because they develop the CWM in their rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Desteroy said:
I need the recovery of Androidarmv6, because they develop the CWM in their rom.
Click to expand...
Click to collapse
Why do you need it?

Viper The Ripper said:
Why do you need it?
Click to expand...
Click to collapse
Because i want try it

Desteroy said:
Because i want try it
Click to expand...
Click to collapse
...

Viper The Ripper said:
...
Click to expand...
Click to collapse
This is the recovery by androidarmv6? I want that because in the update of the rom also the recovery was updated

Desteroy said:
This is the recovery by androidarmv6? I want that because in the update of the rom also the recovery was updated
Click to expand...
Click to collapse
aham!

Viper The Ripper said:
aham!
Click to expand...
Click to collapse
I need the good link please

Help to get back to Stock 4.4.4 Moto G XT1063 !

Hello Everyone here ,
i have Motorola Moto G 2nd 2014 , 8Gb , Single Sim , global GSM XT-1063
its now working on the last Update 5.0.2 Lollipop and i really need to get it back to stock 4.4.4 ?!
its very lag and Format Don't do will too
i need help to find Stock 4.4.4 and how to flash it ! step by step " i'm new with Motorola software"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Its not a good Idea to downgrade ur firmware u can try any easy installer

vaisakmct said:
Its not a good Idea to downgrade ur firmware u can try any easy installer
Click to expand...
Click to collapse
why its not good idea ? (i was do it with Samsung Phones ) but here i want to know how to do it
please try to help me with that :crying: :crying:
i need to get back to 4.4.4

Up Up , any help guys ?

a7med $oft said:
Up Up , any help guys ?
Click to expand...
Click to collapse
USE THE EASY INSTALLER not this firmware
http://www.filefactory.com/file/1d5jrwgq2lzj/RETUGLB_XT1063_4.4.4_KXB21.85-23_cid9_CFC.xml.zip
this is firmware you need - you need to install via fastboot - theres no easy installer made for this (yet)- cant make untill school run done..... approx 2hrs from now
---------- Post added at 08:27 AM ---------- Previous post was at 08:13 AM ----------
vaisakmct said:
Its not a good Idea to downgrade ur firmware u can try any easy installer
Click to expand...
Click to collapse
err no ANY easy installer will break phone -- It needs the correct version for xt1063 -- I normally dont support xt1063 on kitkat but am making it and uploading
---------- Post added at 08:30 AM ---------- Previous post was at 08:27 AM ----------
XT1063 Easy Installer 4.4.4 RETUGLB
download to pc - unzip to pc - READ instructions - run from pc via USB cable in AP FASTBOOT mode
this is NOT a flashable zip for TWRP -- ALL done from PC
---------- Post added at 08:35 AM ---------- Previous post was at 08:30 AM ----------
a7med $oft said:
Up Up , any help guys ?
Click to expand...
Click to collapse
it requires a UNLOCKED BOOTLOADER to downgrade.. this will void any warranty ..... at OWN RISK! - untested as I dont own a xt1063 but should work as commands and file naming / structure the same

reefuge said:
USE THE EASY INSTALLER not this firmware
http://www.filefactory.com/file/1d5jrwgq2lzj/RETUGLB_XT1063_4.4.4_KXB21.85-23_cid9_CFC.xml.zip
this is firmware you need - you need to install via fastboot - theres no easy installer made for this (yet)- cant make untill school run done..... approx 2hrs from now
---------- Post added at 08:27 AM ---------- Previous post was at 08:13 AM ----------
err no ANY easy installer will break phone -- It needs the correct version for xt1063 -- I normally dont support xt1063 on kitkat but am making it and uploading
---------- Post added at 08:30 AM ---------- Previous post was at 08:27 AM ----------
XT1063 Easy Installer 4.4.4 RETUGLB
download to pc - unzip to pc - READ instructions - run from pc via USB cable in AP FASTBOOT mode
this is NOT a flashable zip for TWRP -- ALL done from PC
---------- Post added at 08:35 AM ---------- Previous post was at 08:30 AM ----------
it requires a UNLOCKED BOOTLOADER to downgrade.. this will void any warranty ..... at OWN RISK! - untested as I dont own a xt1063 but should work as commands and file naming / structure the same
Click to expand...
Click to collapse
Sorry i can't gt any point from that ! its for my bad English for sure
but i don't have any Warranty and if something happen to it , no one here can fix it
i use in Samsung phones to Odin and put the Room in Odin and put it in Download mode and Start and Boom its finish and its work fine
i searching alot and get tired from searching and i found that
http://forum.xda-developers.com/moto-g-2014/development/original-motorola-firmware-collection-t3153533
but i found alot of 4.4.4 for my xt1063 i don't know witch one to chose it and how to flash it , and what 's that Fastboot MOD and what's is that easy installer ??
and sorry again i'm not that much good in English and hope to Explain more , thanks guys

Why no one can help me and tell me how to flash stock ROM !!! Up up

a7med $oft said:
Why no one can help me and tell me how to flash stock ROM !!! Up up
Click to expand...
Click to collapse
Why you can't look for topics about flashing the stock firmware???

zman01 said:
Why you can't look for topics about flashing the stock firmware???
Click to expand...
Click to collapse
i really do this man ,, i keep searching but i can't understand things
"""
Instructions 4.4.4:
1. Download 4.4.4 and Extract it to a folder
2. Download mfastboot-v2 and Extract it into the same folder [mfastboot Download: http://goo.gl/lTYq4F]
3. Reboot the phone into Bootloader
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one
"""
i'm now have the firmware of XT1063 and this Pic of it
but
i can't find mfastboot cuz the link do not work
and i can't understand what have to do in point number 4 its about commands ?
so please anyone help me with that and explain it more to me
WHAT TO DO NEXT !!

You just have to install the correct usb drivers for the phone and run the easy installer .bat file and it will flash the driver automatically.

[ROM] [7.1.2] [UNOFFICIAL] SlimROM Beta 0.21

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Our main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems. The entire team work together to bring you this tailor-made beauty straight from AOSP source code.
Download : https://goo.gl/QnWwzZ
Bugs
GPS && FM
Root Access (working on it)
No Theme Support ( It is in progress)
Installation Instructions:
- Download the ROM
- Put the downloaded zip files on your SDCard
- Reboot in Recovery
- Wipe System, Cache, Dalvik Cache, Internal and Data Partition
- Flash rom
- Flash Gapps
- Reboot system
Contributors
@flex1911
ROM OS Version: 7.1.2
ROM Kernel: Linux 3.4.x
Version Information
Status: beta
Last Updated 2017-05-30

Reserved
-- For Root Try Magisk
Flash ROM
FLash Gapps
Flash Magisk v12
Flash Slimrom Magisk Kernel
Reboot

thanks @rkj911 gonna try this one since im using slimrom on my old samsung S2 haha!

Keep is mind magisk might give bootloop so just wait for some other root options

rkj911 said:
Keep is mind magisk might give bootloop so just wait for some other root options
Click to expand...
Click to collapse
so the 2nd post is not sure if it will give root access?

Its for testing

oh well i already downloaded all recipes i will try and reply here
---------- Post added at 07:50 PM ---------- Previous post was at 07:41 PM ----------
incompatible device when installing gapps 7.1 pico
---------- Post added at 08:45 PM ---------- Previous post was at 07:50 PM ----------
made it work but stucked in checking updates
---------- Post added at 09:22 PM ---------- Previous post was at 08:45 PM ----------
bootloop when using magisk zips

mavz31 said:
oh well i already downloaded all recipes i will try and reply here
---------- Post added at 07:50 PM ---------- Previous post was at 07:41 PM ----------
incompatible device when installing gapps 7.1 pico
---------- Post added at 08:45 PM ---------- Previous post was at 07:50 PM ----------
made it work but stucked in checking updates
---------- Post added at 09:22 PM ---------- Previous post was at 08:45 PM ----------
bootloop when using magisk zips
Click to expand...
Click to collapse
Yeah Gapps did work without issue when someone else tried maybe try updating.

screenshot please!

nheolinkin said:
screenshot please!
Click to expand...
Click to collapse
There you go .

No music app no msg app no root

ultimatevishukmr said:
No music app no msg app no root
Click to expand...
Click to collapse
You flash gapps install which ever music app and msging app from play store.

rkj911 said:
You flash gapps install which ever music app and msging app from play store.
Click to expand...
Click to collapse
If i don't wnt gapps then ?

ultimatevishukmr said:
If i don't wnt gapps then ?
Click to expand...
Click to collapse
Don't flash gapps then

ultimatevishukmr said:
If i don't wnt gapps then ?
Click to expand...
Click to collapse
Download apk and install
Sent from my ASUS_T00F using Tapatalk

ultimatevishukmr said:
No music app no msg app no root
Click to expand...
Click to collapse
This is not foulf of developer, Slim roms just doesnt contain it.

Congratulations!
I really enjoyed the project. Is it still in development? I want to test but it would be good to know if it will continue...

supporting !
magisk not working

the.password said:
Congratulations!
I really enjoyed the project. Is it still in development? I want to test but it would be good to know if it will continue...
Click to expand...
Click to collapse
I will continue if I find a way to root the rom.

aymanz said:
supporting !
magisk not working
Click to expand...
Click to collapse
I know thats why root access is in the bug list.

[Beta_P8_Lite_Alice_tools_pack] - Tools Pack to mod your P8 Lite

Hi!
This is not new, had done it before but this one is a bit updated.
This are the tools i use in my mods, etc!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can download from here:
Mega
MediaFire
Download and extract the folder from inside then execute Beta_P8_Lite_Alice_tools_pack.exe, just follow what is write on tool!
Any issue please tell me!!!

Persona78, I want to Install B618 stock firmware, But my phone is Asian not European, Can u tell me how to Install Stock image and that B618 stock firmware?

MohmmadUzairKhan said:
Persona78, I want to Install B618 stock firmware, But my phone is Asian not European, Can u tell me how to Install Stock image and that B618 stock firmware?
Click to expand...
Click to collapse
Flash twrp and localization europe file and b618 rom
That's all
Sent from my Moto G5S using XDA Labs

Adi5 said:
Flash twrp and localization europe file and b618 rom
That's all
Sent from my Moto G5S using XDA Labs
Click to expand...
Click to collapse
How to Flash Localization europe file and b618 stock rom using twrp?

MohmmadUzairKhan said:
How to Flash Localization europe file and b618 stock rom using twrp?
Click to expand...
Click to collapse
Before flash EU location you should backup your own.

But My Point is
How to Flash a Stock rom B618?
Click to expand...
Click to collapse
Currently using B618 MOD by persona78
---------- Post added at 08:27 PM ---------- Previous post was at 08:25 PM ----------
How to Flash a Stock rom B618? in Asian P8 lite ALE l21?
Click to expand...
Click to collapse
persona please elaborate all steps

MohmmadUzairKhan said:
But My Point is
Currently using B618 MOD by persona78
---------- Post added at 08:27 PM ---------- Previous post was at 08:25 PM ----------
persona please elaborate all steps
Click to expand...
Click to collapse
Find Your stock ROM because full flash replace all...
Try HWFF...
Now the Steps!
Step 1 - download ROM ( update.zip)
Setp 2 - copy to sd card or to internal ROM
Step 3 - use twrp to install it!

persona78 said:
Find Your stock ROM because full flash replace all...
Try HWFF...
Now the Steps!
Step 1 - download ROM ( update.zip)
Setp 2 - copy to sd card or to internal ROM
Step 3 - use twrp to install it!
Click to expand...
Click to collapse
HWFF meanz?
---------- Post added at 04:33 AM ---------- Previous post was at 04:22 AM ----------
persona78 said:
Find Your stock ROM because full flash replace all...
Try HWFF...
Now the Steps!
Step 1 - download ROM ( update.zip)
Setp 2 - copy to sd card or to internal ROM
Step 3 - use twrp to install it!
Click to expand...
Click to collapse
Europena Stock Rom is B618 which i want to install , What are you trying to say i Found my Country Stock Rom?
---------- Post added at 04:36 AM ---------- Previous post was at 04:33 AM ----------
My country Rom is
C185B525
Click to expand...
Click to collapse

MohmmadUzairKhan said:
HWFF meanz?
---------- Post added at 04:33 AM ---------- Previous post was at 04:22 AM ----------
Europena Stock Rom is B618 which i want to install , What are you trying to say i Found my Country Stock Rom?
---------- Post added at 04:36 AM ---------- Previous post was at 04:33 AM ----------
My country Rom is
Click to expand...
Click to collapse
HWFF means - > Huawei Firmware Finder
But you can go to their site
http://pro-teammt.ru/firmware-database/?firmware_model=ALE-L&firmware_page=0