Related
Hi, I have an hw6515 with a corrupted original Rom (0.92) and that it is imposible to upgrade via USB using the Huu rom upgrade application from HP. Then I´ve tried many things and discover that I can upgrade an entire image. I tried a hw6515c image, bigrom, Ipaqdisk from file farmer and everything works. Except my radio rom that is not recognized when I use the HP asset application.
So, how can I upgrade the original NBF files from HP not using activesync connection and not using HUU rom update utility from HP? How can I use the Romupdate utility (mtty) to update only Rom radio OS and Radio File system? Is there any command in DOS, Windows or Linux. How can I map the entire rom?
this cant be done with a corrupted rom i think the only thing can you do is reboot the device in bootloader mode and try it
enjoy it!!!!
***nEuEzIeL***
I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...
ok!!
tk3w said:
I have the same problem.
After flash my 6515d to change from ENG to ITA, the update is go bad.
so I have reset it in engineering mode ( pressed powerON - camera - Joystic -Soft-Reset ) and reflashed with sp33246 downloaded from HP.
When reflash the device, it stop at 0,1% at upgrade Radio Stack.
I have removed radioOS.nbf and radioFS.nbf writing ";" at the beginning of them line in the file hpRUU.ini and reflashed the device.
This time the flashing is go on and my device is good started but the part of radio is off.
I have seen in many forum and the problem seems being that in the servicepack downloaded from HP the files radio are only upgrade and not working if in the device there isn't already a software radio.
So the only way for reset completely the device is to restore an backup,
but I don't have any backup of my device.
Can anyone share the backup of its device?
Tank...
Click to expand...
Click to collapse
Tell me how can you change your language ??(becouse i know this cant be done )
try it with th same language of your device
enjoy it
***nEuEzIeL***
Yes, the change of language dont can be done.
but I did not know it and I have forced the flashing with an crakked program.
The flashing is go bad and now I have no image of old device.
The reflashing of the rom with upgrade of HP fail at %1 and the only way for to return at the old operative system is the restore the OS from the SD.
Please, can you share a backup of 6515d (english ) ?
Tank.
ups
no i dont have the 6515d i have the 6515b and your device are bricked you need to send to hp for a warranty or mailme to [email protected] and the topic need 6515 im from mexico and you can send me your device if you want but your device are briked
I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.
I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..
The Rom dump via d2s : doesn't include the gsm parts
We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.
But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.
I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)
I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.
So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.
dim920 said:
I have the same problem, i need help because i investigate a lot but don't know what to do now exactly...If you go Hp, they ask you for 300$ motherboard.
I Everytime stucked at 0,1% : I Try a lot of HPRompackage,
Modified rom, modified installer Hpruu, etc..
The Rom dump via d2s : doesn't include the gsm parts
We need arguments and specify a adress range :
if you want i have a radiorom dump of the
Adress : d2s 60000000 800000,
and the radiobeetlespatch.
But i don't know exactly how to investigate more the good adress.
I think we have to delete and rewrite manually good adress range.
I can find you a lot of rominstall to change language,
( not the problem just modifications in nbf files with winhex)
I investigate a lot the bootloader, have password pass 1, etc...
Try to listen with Usbmonitor, look dump of ram memory with winhex,
etc... So a lot of way to investigate and a lot of solutions for other device very close to our 6515.
So I send to everybody ask me a complete packages of the tools & rom who can help, and my extended info.
Click to expand...
Click to collapse
Is better Honestly buy a new Morher Card or a New Device SEll That in a Spare pices
Hi, dim920.
I would be pleasing you of to receive material and informations about.
My email is [email protected] but you can share your package of tools also
elsewhere on the web.
Tank
Radio package 6515
For download my package with :
- Radiodump (adress 60000000 800000)
- Special hpruu for incorrect device sku or other error messages
- Beetles Radio Patch
- Bigrom
- Ntrw to write to sd
- Romupdate & mtty
- usb monitor trial
- winhex trial
- Hx 4700 bootloader to modify the header
- At command guide
go here : http://dl.free.fr/TOErXwWr/package6515rom.rar
THE Bootloader PASSWORD level 0 is : "BOOTLOADER"
the level 1 (pass1) is 0000000000000000 (zero x 16)
I exclude all official Hp rom package,
my device is french and a 6515a.
For change Your phone language,
Download special rom & read here :
http://mobilitytoday.com/forum/showthread.php?t=12231
I post in few moments all an short description of what i do
,what i think and what are the solutions for the same problem
on other device.
I try to regroup all i have for tomorrow night if you want to
speak before and have msn :
[email protected]
Tank you for your share.
I am trying to flash the rom from sd card.
I have downloaded a rom image of 6515 and I must put it in the SD card.
After to backup the PDA over SD with romupdate.exe dowloaded from :
http://www.filefarmer.com/2/dmc8742
with d2s, I have put the card ( SD 512 MB ) into card reader and ran
ntrw ( hw6515_bigrom112.zip in the link above ) for write bigrom112.nb1
into SD, but something does not work!!! My SD is blank.
I have an image of rom : IPAQROM.img and I could also try to mount it on the SD but I know that I have to use IPAQDISK.
I have tried to find it for many days on the web but I have not found it!!!!
I think that the single way for to resolve the problem is to make the flash from the SD card.
Makes to know your news me.
The single way that we have to resolve the problem is to work together.
Excuse for my English
Hi.
- For the problem of Dead Radio, nos gsm, and asset info blank,
A Classic Rom dump doesn't take the radio Gsm part.
- Flashing Bigrom or RomDump of a working device can only help you
to have extended memory on External rom, or to change language.
- When you do d2s, Romupdate format the sd in a special format when writing your rom. After copy backuped rom to your pc and finish by copy the new Rom on Sd via Ntrw. Move the sd from pc to pda, Finish via hard reset (1/Power 2/joystick down 3/Reset stay 5 sec, you see bootloader lightly, unpress in good order
1/ Reset 2/ Others. You see bootloader HP v0.21.
After few seconds "press action buttons to flash"
It's normal that the sd is blank, because it's a special formatted via d2s
for the pda can boot so pda os & os pc ask you if you wat to format.
So you can't see the file writed by ntrw, but she is ready for flash, if you follow steps & the bootloader stuck in bootloader and don't propose to flash, it's a problem of rom compatibility.
- So the D2s command don't take the gsm part.
I think we have to specify the good adress range, it's why
the file radiorom in my package is a rom dump d2s 60000000 800000 of a working device. If i copy back on the working device, he says upgrade radio stack and ok so solution is not too far.
Try it but my device don't wan't to take back this rom, stucked on "calculate checksum" on the pda and nothing never happen. If i do checksum command it's ok, but if i do a checksum 60000000 800000 he stuck too on "cal checksum".
So i think we have to erase manually with erase command & wdata, but really not sure to not brick more the devices but it's how they can solve the problem on other device...
Can't access bootloader menu on my hp 6515
How can I access bootloader menu on my hp ipaq hw 6515?
I tried all combinations POWER + Joystick + Camera + Reset
I only get a screen with message: Serial - hp - v0.21
This was because a ROM update went wrong...
Thx,
shaker308
That screen you see with Serial -HP - v0.21 IS the bootloader screen. You need to then connect the ipaq to a computer and use a terminal software to access the bootloader menu
ok... I didn't know that was the bootloader screen. I'll try what you told me.
Thanks cluurk.
shaker308
iPAQDISK.exe
Can anyone tell me where can I find iPAQDISK.exe.
If you can please send it to my e-mail.
[email protected]
Thnx,
Shaker308
shaker308 said:
Can anyone tell me where can I find iPAQDISK.exe.
If you can please send it to my e-mail.
[email protected]
Thnx,
Shaker308
Click to expand...
Click to collapse
http://blogs.unbolt.net/media/blogs/brinley/iPAQDISK.zip
found it just now.. Trying to play around with a H6365.
ipaq hw6515 dead
hi,
please help restore my device(spanish movistar hp),
it doesn't recognize Radio GSM after upgrading to 1.29sp
Radio presente: Si
Version del firmware:
Version protocolo de la radio:
Version de Cargador de inicializacion:
Version del sistema de archivo de la Radio:
Version GDFS predefinida de la radio:
Numero IMEI:
anything i can do please?
i need radio rom file to restore from sd card
I have definitely got the blue angel. It is an O2 Xda 11s.
I have downloaded the how to flash your BA pdf by D-Two, and followed the instructions. It gets through to the stage where it's about load the software onto the phone, and then it quits saying that he phone is not the appropriate model.
device information
Operator version: PDAViet.net
ROM version: 6.01.10 VH
ROM date: 07/08/08
Radio version: 1.06.00
ExtROM: diamond (01)
RAM size: 128 MB
Flashing eyes: 32 MB
Storage size: 60.3 MB
At present I have windows mobile 6.1.
And suggestions please?
for upgrading, you use the MAupgradeut_noID.
that program avoids country id errors but it was originally made for the magician, hence MA, whereas the original BA upgrade utility is called BAupgradeut.
that is why you get that error. you have to put the device into bootloader mode before connecting it to the pc and before starting maupgradeut_noid, that way, you avoid the device id check.
make sure to follow the correct upgrade procedure, found here: http://forum.xda-developers.com/showthread.php?t=630416
These are the instructions I used;
Temporarily remove your SD Card (it may work for you with the SD card still in your BA, but you may not be able to enter USB mode when cradled).
Put your device into Bootloader mode by pressing and holding the "Power" & "Record" buttons, and then press the Reset Button. Help me with this step
Connect the phone to the sync cable/cradle. sarcasm ahead Note: Did you see a sign out in front of this point that said: "You can flash using BlueTooth connection?" You know why you didn't see that sign? Because you can NOT FLASH using BlueTooth!
Now you can execute the installer file. (something like "MaUpgradeUt_noID")<--------------- Used This
Here is the screen just before boarding the software.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba1.png
And here is the error message.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba2.png
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Chef_Tony said:
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Click to expand...
Click to collapse
yep, you were right,,,,,,, BUT same error message;
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/xda4.png
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Chef_Tony said:
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Click to expand...
Click to collapse
Okay yes, I should have said this. I am using windows seven on a Lenovo N500 4233 32g. The problem is, trying to get hold of an XP machine. Have you tried running this programme in compatibility mode? I will have a look at your instructions and see where I get to.
Thanks for your help,
Is d-two's manual, the HTC service manual in you sig?
no, it is to be found here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
compatibility has nothing to do with it, neither has the xp mode or any virtual machine, because there must be suitable windows 7 drivers present. but i cannot help you with his tutorial, since i use windows xp for flashing and have never successfully used windows 7 for flashing.
the htc service manual in my sig is the official htc manual for hardware repairs, you can learn to disassemble the device there and have a list of spare parts
Q&A for [ROM] HUAWEI Ascend W1-U00 | v1.00
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
DerSchorsch1 said:
It seems that in this video it's described, how the sdcard-problem can be permanently solved, so that we don't have to put the card out and in after a shutdown. Is this right?
Can this be implemented in the rom?
I don't understand the steps to do in the video. I can only recognize that i has something to do with visual studio. Can someone describe it more detailed?
---------- Post added at 07:25 PM ---------- Previous post was at 07:22 PM ----------
Everyone please donate, so he can buy a new gorilla glas display!
Click to expand...
Click to collapse
You did notice that this is an emulated device I hope? Rules for an emulator and for a live device are usually different.. just because a fix works in the emulator it doesn't have to work with the device.. and as far as I'm aware it doesn't.
Carrier Lock
Hi there,
Thanks for the ROM dev work!
I have a W1 which was O2 branded, after the procedure of installing the ROM, my phone has become carrier locked..
Is there an option I missed during install?
Regards,
Ed
I need help
Hello, I also use the HUAWEI Ascend W1 I come from China, I would like to know about the method of making the rom, and I open the app file will get a mbn file and do not know how to proceed, and I'm very interested in this, you can explain under it? (My English is not very good, but please forgive me use google) If you teach me, would be extremely grateful!
Hello,
thanks WojtasXda for the effort!
---------- Post added at 08:19 AM ---------- Previous post was at 08:13 AM ----------
It will be possible to install the rom from Osx or linux?
Registry tweaks from russian forum (4pda)
Here, guys, tweaks for our HUAWEI W1.
Go to \Windows\Packages\RegistryFiles and place OEMSettings.reg here.
First bootup will be ~2 minites.
Tweak list:
-Camera sound on/off in sound settings;
-Wi-Fi connection sound on/off;
-3g/Wi-Fi arrows in status bar switched on;
-Activated PfD (don't install program);
-Jailbreak(interop unlock,capabilities unlock)
-Can be installed hacked appx's from wp-seven
-SDK registered
-Search button opens google
-Any app can be placed to camera's button (e.g. OneShot)
-Now you have Nokia Lumia 920 (doesn't really work).
To make your phone 'NL920', you must mount in regedit 'SYSTEM' and install 2nd (zip). After that, you can easily install all Nokia Exclusives via SysApp Pusher (also, more apps in store!).
I think you've got a typo in the OEMSettings.reg file (inside the same-named archive), on one of the tweaks that's supposed to give file system via USB:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvn]
should be
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvc]
unless it's supposed to control the Media Transfer Protocol Subversion
Will this work with Huawei Ascend W1-U00 from Globe PH plan?
Hi.
My phone was given to me by my mother who received it with her Globe (a Philippine mobile network service provider) postpaid plan (which unusually uses prepaid services). I've been frustrated with this phone's storage becoming full very easily even though I only have very few apps (except for Spider-Man Unlimited which downloaded a 200-MB DLC) installed and I don't put any files in the phone storage. Since Huawei seemingly abandoned their Windows phones, there's no hope of us getting any update so we're stuck with the stock WP8 update 1. Will this custom ROM work with this particular W1-U00? Does anyone know where I can get a stock ROM for this particular phone?
Name: Windows Phone
Model: HUAWEI W1-U00
Software: Windows Phone 8.0
Screen Resolution: 480x800
OS version: 8.0.10211.204
Firmware revision number: 1030.5614.29400.20500
Hardware revision number: HD1U8835M Ver.B
Chip SOC version: 8230
WojtasXda said:
Hello everyone !
I have new W1, but this is U34 version. Anyone tried flashign this model? Acctually QPST shows error "Cookie (if present) not received.
Click to expand...
Click to collapse
I have the U34 and I've not been able to flash it. I always get the same cookie error in QPST, and handshake failure error in WP8 Flash Tool.
I hope you will be able to find the way to flash the U34.
You need install Windows 7, Use Qemu or Vmware. Drivers from package with QPST doesnt works in W8.
Click to expand...
Click to collapse
That's not true at all. QPST works perfectly fine on Windows 8. The only issue is if you're running a x64 OS, in which case you need to run the QPST programs as admin.
Is this ROM only in English language?
Problems with Flashing
Hello!
At First thanks for the good work. I will donate it, if i getting it work for me.
I got some Problems with flashing.
1) With Flash Tool:
Diag Setting is on, Phone is resetted and with the Flashtool i get the "Firmware Handshake Fail"-Error.
2) With QPST i can get into Download Mode (Qualcomm ... 9008) but then it shows me a "Cookie not received"-Error.
I tried the Flashtool in Downloadmode but that doesnt recognize my device.
My PC-Config:
Windows 7 Ultimate 64-Bit
Intel i5 Notebook
My Handy-FW:
Huawei W1-U00 Simlock Free
OS Version: 8.10.14203.306 Developer Preview
Thank you very much!
Edit:
I got the Problem. It only works for me without Diag Settings and only with QPST.
The folder from the Repair Bootloader was: W1-U00 Repair bootloader/flashing/
and i only copied the "flashing" folder. Now no "Cookie"-Error.
Hope this helps someone....
Step 2 error
I finish step 1. Flash custom ROM with QPST (Windows 8.1 x64).
Phone in mass-storage mode (all disk available).
Qualcomm MMC Storage USB Device present in Device manager.
When run WP8CRUU get error: Cannot open device "Qualcomm MMC Storage USB Device" Error 5 .
Whats wrong?
Problem solved:
With phone connected as mass storage reinstall Qualcomm USB drivers!
Lag issue on the scroll
Hi @WojtasXda, I installed this wonderful ROM yesterday and everything is working perfectly THANK YOU SO MUCH <3
but when I scroll something with the finger always placed in the screen it lags a bit.
Huawei Ascend W1-U00
If you could help me to find a fix I thank
Error 109 on WP8CRUU.exe
Does v1.10 require v1.00 flashed first? I'm getting an error 109 (Cannot open device Qualcomm MMC Storage USB Device) when I run WP8CRUU.exe. My phone's (W1-U00) already in mass storage mode.
Now, I'm getting an error 5 (Cannot open device Qualcomm MMC Storage USB Device).
Can anyone please help me with this? I was able to flash the ROM with mass storage mode capability and set my phone to mass storage mode. Now, I can't flash the custom ROM because of this error. I don't think I missed anything. I'm running this on a Windows 7 Ultimate 64-bit. I didn't install MS Visual Studio 2013 since it requires Windows 8.1. I did install the Qualcomm USB drivers, simpleio, and QPST. I have MS Visual C++ 2005, 2008, and 2012 (all 32-bit) installed.
Arhy's workaround didn't work for me, by the way.
personal settings/data
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...
blonder_andi said:
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...
Click to expand...
Click to collapse
Try going to Settings -> backup.
tempname said:
Try going to Settings -> backup.
Click to expand...
Click to collapse
Thanks for the reply...
As far as is can see you just can backup fotos, messages, and IE-settings.
(no contacts, calender-information, certificates,...)
Is there another way to get at least my contacts from WP8 to WP8.1?
An additional question:
Is it possible to get back to WP8 after flashing the WP8.1 rom?
Any hints welcome
best regards
andi
install HUAWEI Ascend W1-U00 | v1.10
Hi, i try to install these rom.
To install that i do this steps:
1) Enter Qualcomm emergency mode
2) Click Start>All Application>QPST>QPST Configuration and configure phone
3) Start>All Application>QPST>eMMC Software Download，Click “Load Build Contents…” Select contents.xml in unrared W1-U00(C00)Repair bootloader.rar，Check "Program Boot Loaders",UnCheck "Program MMC device", Click Download
4) After complete, the port will change into Qualcomm HS-USB Diagnostics 9006
5) UnCheck Program boot loaders，Check Program MMC device，Select Qualcomm MMC port，Click Download again.
6) Wait for it to complete, disconnect phone.
7) Press and hold "vol -" then also press and hold Power button and connect the phone to the computer, now the device manager will display WP8 UEFI USB SimpleI/O Port.
8) Run Flash Tool , select ROM file / Config XML and click "Scan && Download".
9) When phone displays 100%, and the inscription OK. The process of flashing rom is complete. Now you need Reset the phone (press power button on 15 sec or remove battery). Flash tool displays information about the bad file FFU, just ignore it
10) Run device in mass storage mode
11) Run WP8CRUU.exe... BUT
No instrunction, only black console. when i close the console the copy begin.. but stop at 45% with "Error: cannot write 5 file. Error 5"
Suggestion?
SOLVED: must be waiting on the black console
I can not find Data\\PROGRAMS\\WINDOWSAPP directory，how can I get full FS access ？
Hey guys. Sorry to bother you in the X98 section, but since there's no section for the X80 yet and maybe the devices have some similarities, I hope it's ok.
The tablet worked fine, but to remove any possible bloatware under Windows or Android, I reset Windows. Somehow the device must have crashed (low battery?) and now I can't boot to Windows anymore (black screen and / or boot loop). Of course I made no backup / recovery disk. Android still works fine and I still get into BIOS / UEFI.
I tried reinstalling Windows via OTG with USB stick. I got to the point where I can choose a partition. Problem is, there are lots of partitions (Android, recovery, System and so on). I located the Windows partition, formatted / deleted it and tried to reinstall Windows on this partition. Just the exact way I would do it on a PC. Somehow it won't install on this partition. The error message says something about "the partitions are not in the recommended order. Further information for installation on GPT-volumes..." (I don't know the exact English phrasing because everything is in German). I chose "continue anyway". Then I get the message that "the EFI-system is not formatted in NTFS. Format the partition to FAT32 and start install procedure again". I press ok and get back to Windows Setup (Install now).
I also tried different repair and recovery options. One time I got error code 0xC0000034. Funny thing is, Windows still seems to be there because while trying to repair / recover I tried to load some drivers and could see the hard drives and folders under Windows.
I tried downloading the original roms here: http://pan.baidu.com/s/1qYEa8gc
You need a Baidu account for the larger files and after days and days I gave up to create such an account as it seems to work only with a mainland China number. There's an option for oversea mobiles but that's not working. I tried a QQ-account, but Baidu wants to link with it and you need that telephone number again. So apparently there's no way to get the original files that way.
I found some stuff here: http://www.needrom.com/download/teclast-x80-pro-dualboot/ but that's only a tutorial file in Chinese and some flash programms / drivers (also got them from Baidu - smaller files are possible to download without an account).
Long story short: I guess recovering Windows 10 is too much effort, so I want to make the tablet Android only and of course want to use the whole capacity for Android. I found a thread on reddit about removing Windows on the X98: https://www.reddit.com/r/teclast/comments/479eua/teclast_x89_how_to_remove_windows_10/
But I have no idea which partitions are definitely needed for Android and which ones I can safely delete. I found a partition map here: http://wheresmykeyboard.com/2015/08/teclast-x98-air-64gb-dual-boot-default-partition-map/ but that doesn't help me that much because they look different.
Attached you will find a photo of all the partitions on my device. I guess there are some which were created during the failed Windows installation because I had about 20 GB free space and now only 17.7 GB.
So is there anybody out there who knows if it's possible to remove Windows completely and which partitions I have to delete?
Did you ever figure this out? I just bought an X80 Pro and was thinking of doing something similar since I plan on making it an android-only tablet.
Deathgazer said:
Did you ever figure this out? I just bought an X80 Pro and was thinking of doing something similar since I plan on making it an android-only tablet.
Click to expand...
Click to collapse
Hi. Sorry for the late replay. Yes, I figured it out and my X80 Pro is now running Android-only with 32 GB. In the end, it wasn't that hard but a long way to success.
metalaxi said:
Hi. Sorry for the late replay. Yes, I figured it out and my X80 Pro is now running Android-only with 32 GB. In the end, it wasn't that hard but a long way to success.
Click to expand...
Click to collapse
Please do describe how you achieved Android-only with 32 GB memory
Cheers
metalaxi said:
Hi. Sorry for the late replay. Yes, I figured it out and my X80 Pro is now running Android-only with 32 GB. In the end, it wasn't that hard but a long way to success.
Click to expand...
Click to collapse
Yes please tell us how metalaxi , it'll be much appreciated.:good:
Ok, guys. Since some of you are asking how I did it, I'm going to try to explain it. It's kinda embarrassing that I don't remember the exact way but I hope it helps somehow. I used the tutorial from this site: http://techtablets.com/forum/topic/x80-plus-android-os-only/#login
Even though it's supposed to be for the Plus model, it also worked on the Pro. Btw, the guy Alex in that thread is me .
You can download all the files from my Google Drive here: https://drive.google.com/open?id=0BxEFqy4Rt9w_cnh3VG9ySk5sOHM
You need
- Android5.1 Upgrade Tool.rar
- X80 Pro (E3E6)- Dual OS - Android5.1-V1.04 Firmware.rar
- gpt.rar (Credit goes to Allember @techtablets-forum; hope it's ok to spread the file)
First you have to install the flash tool. Unrar the firmware and replace the gpt.bin. Then flash the firmware by checking BLANK.
Problem is that when I did all that, my Windows was already crushed and wasn't working anymore. I can't remember anymore if I erased the Windows partitions or any others beforehand. If you're not interested in Windows anymore, just flash it without changing or erasing any of the partitions. I guess by replacing the gpt-file, you do all that automatically.
I hope this somehow helps you. Feel free to ask for more help.
Have a good night!
metalaxi said:
Ok, guys. Since some of you are asking how I did it, I'm going to try to explain it. It's kinda embarrassing that I don't remember the exact way but I hope it helps somehow. I used the tutorial from this site: http://techtablets.com/forum/topic/x80-plus-android-os-only/#login
Even though it's supposed to be for the Plus model, it also worked on the Pro. Btw, the guy Alex in that thread is me .
You can download all the files from my Google Drive here: https://drive.google.com/open?id=0BxEFqy4Rt9w_cnh3VG9ySk5sOHM
You need
- Android5.1 Upgrade Tool.rar
- X80 Pro (E3E6)- Dual OS - Android5.1-V1.04 Firmware.rar
- gpt.rar (Credit goes to Allember @techtablets-forum; hope it's ok to spread the file)
First you have to install the flash tool. Unrar the firmware and replace the gpt.bin. Then flash the firmware by checking BLANK.
Problem is that when I did all that, my Windows was already crushed and wasn't working anymore. I can't remember anymore if I erased the Windows partitions or any others beforehand. If you're not interested in Windows anymore, just flash it without changing or erasing any of the partitions. I guess by replacing the gpt-file, you do all that automatically.
I hope this somehow helps you. Feel free to ask for more help.
Have a good night!
Click to expand...
Click to collapse
Hi @metalaxi. Do you think its possible to like "reverse" and use the same files to remove Android instead and maintain the Windows 10? Appreciate to hear from you. Thanks!
Do we have to change the gpt before doing what you said in your PDF? Or I have just to follow your PDF?
Hi guys, got mine a few months and want to get rid of the Windows part, but the instructions are insufficient for a joker like me.....
1. Download the firmware, its 4 parts of rar being zipped together
2. flash the firmware HOW?!?!?! I have no Idea...... please give us some closer instructions.
reycharlesconrad said:
Hi @metalaxi. Do you think its possible to like "reverse" and use the same files to remove Android instead and maintain the Windows 10? Appreciate to hear from you. Thanks!
Click to expand...
Click to collapse
Sorry, I can't answer that sufficent enough. As far as I know, you can just delete all partitions except the ones from Windows. Then format the unallocated space and merge it with the one from Windows. No guarantee!
dirkzelf said:
Hi guys, got mine a few months and want to get rid of the Windows part, but the instructions are insufficient for a joker like me.....
1. Download the firmware, its 4 parts of rar being zipped together
2. flash the firmware HOW?!?!?! I have no Idea...... please give us some closer instructions.
Click to expand...
Click to collapse
1. Which 4 parts do you mean?
2. To flash any firmware, you need to install all the upgrade tools:
IntelAndroidDrvSetup1.5.0
iSocUSB-Driver-Setup-1.2.0
PhoneFlashTool_5.3.4.0_internal_win32
metalaxi said:
1. Which 4 parts do you mean?
2. To flash any firmware, you need to install all the upgrade tools:
IntelAndroidDrvSetup1.5.0
iSocUSB-Driver-Setup-1.2.0
PhoneFlashTool_5.3.4.0_internal_win32
Click to expand...
Click to collapse
it's too long ago, so I don't know what I exactly did there, but since there was no reply for a long time, I just took a shot and worked out well, now I have an Android only tablet.
I just got lucky I guess....
partition help
Hi, please help.
I have x80pro e3e8
I managed to erase a complete disk partition.
You are trying to revive again, fail.
installed here:
iSocUSB-Driver-Setup-1.2.0
IntelAndroidDrvSetup1.5.0
PhoneFlashTool_5.3.4.0_internal_win32
downloaded here:
Firmware (20161020_SZ)
Tablet joined and tried to flash.
* failed - failed loadet.efi
Please help. I can not download from Baidu
* If I use phoneFlasTool and flash a blank disc - Create Flash partition and dual boot and replace recovery?
What to do with an empty disc?
Thanks for any advice
It is not so hard. By mine it was only trial and error. Installiert all drivers an go in the bootloader with three Finger method. Go two levels up and go into bootloader. Then connect to PC and look in Intel flashing tool if connection is reconiced correctly. Select the downloaded file and select flash. Thats it. Device will reboot and you are ready to go.
theone0987654321 said:
It is not so hard. By mine it was only trial and error. Installiert all drivers an go in the bootloader with three Finger method. Go two levels up and go into bootloader. Then connect to PC and look in Intel flashing tool if connection is reconiced correctly. Select the downloaded file and select flash. Thats it. Device will reboot and you are ready to go.
Click to expand...
Click to collapse
Thank you for the advice. That's right, I did it was marked. I found a reason. rom file was saved on desktop, and had a long name (as I downloaded it) It must copy the file to C've renamed the firmware. Everything went alright. I downloaded and used the GPT files for resizing disk and now goes all right. Thank you for responding to my question.
hi, I have problem while flashing.
Phone flash tool always gives ERROR
Automatic reboot is not supported on this device, please reboot the device manually
ERROR : [Port 0/1/4] Failed to reboot the device
Click to expand...
Click to collapse
Any idea what to do? I followed all the steps, tried many times, still same problem. And it's not possible to reboot device manually, because then it lose connection with PC
Restock OS Without Android
Hi there.
I have to restock my Device, but the Intel Flash Tool does not recognize my Device.
I cannot boot into Android to turn on USB-Debugging or go into fastboot mode
How do i flash my device without any OS installed?
---------- Post added at 04:03 PM ---------- Previous post was at 03:52 PM ----------
affe2000 said:
Hi there.
I have to restock my Device, but the Intel Flash Tool does not recognize my Device.
I cannot boot into Android to turn on USB-Debugging or go into fastboot mode
How do i flash my device without any OS installed?
Click to expand...
Click to collapse
Ok, got it working... dnx fastboot mode is there
....
hello guys by accident i deleted windows 10, how can i reinstall them? i dont have the windows 10 icon in the dual boot select i only see the android icon
mike mike baby said:
hello guys by accident i deleted windows 10, how can i reinstall them? i dont have the windows 10 icon in the dual boot select i only see the android icon
Click to expand...
Click to collapse
Straightforward if you can obtain a USB stick capable of storing over 7GB (some 8GB sticks may not); USB hub (ideally a powered hub); USB keyboard; OTG cable.
1) Obtain the Windows files of the correct firmware. The procedure outlined here is for E6E9 firmware, but other firmware will be similar. Download the circa 6.5GB E6E9 firmware Windows files from https://yadi.sk/d/XEvRsoiD3Q4vKX or https://mega.nz/#F!I0AXGR5C!YiNFkZL9DIvzepH28qAjEQ (or from appropriate source for your firmware version).
Decompress the downloads as required to obtain six folders and two files.
2) Format the stick to FAT32.
3) Name the stick WINPE (five uppercase characters).
4) Copy the previously mentioned folders and files to the USB stick.
5) Plug USB stick and USB keyboard into hub; plug hub into OTG cable; plug OTG cable into tablet whilst the tablet is off.
6) Turn on tablet and immediately start tapping << Delete >> key on USB keyboard. This should open the UEFI config section prior to Android boot option. If the tablet displays the Android boot option, turn off the tablet, wait a few seconds, then turn on and start tapping << Delete >> key on USB keyboard again.
7) When in UEFI, touch the title menu option of << Save and Exit >> and look in the << Boot Override >> section for the name of your USB stick, then touch the name of your USB stick. The screen will immediately go blank as the tablet starts to boot from the USB stick.
8) After a few minutes, a numerically display of progress will be displayed in a CMD window.
9) After reaching 100% and nearing completion of the overall installation, the tablet will prompt for acceptance, so accept that prompt.
10) The setup will run a few final operations for a few seconds, then automatically reboot.
11) Done.
You will be prompted to complete the OOBE on each Windows boot until you complete OOBE.
View attachment 5357205
oneplus 6/6t 都可用
警告！不当操作可能会导致手机变砖！
-
20210822 updata
-
project address : https://github.com/edk2-porting
and
Tool download :https://drive.google.com/drive/folders/1GrX9JTVpKwo3WNshqIljPRc9Q6dPJDJJ?usp=sharing
boot download : https://github.com/edk2-porting/edk2-sdm845/releases
drives download : https://github.com/edk2-porting/WOA-Drivers/archive/refs/heads/main.zip
-
Installation tutorial
new tutorial!(English) https://forum.renegade-project.org/t/faq/95
-
article(Chinese) : https://forum.renegade-project.org/t/6-windows/194
-
Device support status
Renegade Project
Renegade Project
renegade-project.org
-
The drive is gradually improving
有问题我会不定期来看的，欢迎提问。
Questions are welcome
It seems better to be merged with the post https://forum.xda-developers.com/t/os-windows-on-arm-polaris.4325377/
la0pe0Ue said:
It seems better to be merged with the post https://forum.xda-developers.com/t/os-windows-on-arm-polaris.4325377/
Click to expand...
Click to collapse
and that thread is locked-moment someone comes up with something groundbreaking or unique it gets shut down-no wonder so much less now on xda (x stands for cut or reduced)
I installed Windows according to this guide and it works.
Mazoch said:
I installed Windows according to this guide and it works.
Click to expand...
Click to collapse
hiow did u do it im keep getting stuck at were u have to enable test mode for divers but the uefi drive dose not let me acces it and help would be greatful thanks my phone is mix2s
Chris3445 said:
hiow did u do it im keep getting stuck at were u have to enable test mode for divers but the uefi drive dose not let me acces it and help would be greatful thanks my phone is mix2s
Click to expand...
Click to collapse
It's been a while since my installation, and frankly I don't remember much about it. Describe your problem in more detail. Rather, you've definitely made a mistake.
Mazoch said:
It's been a while since my installation, and frankly I don't remember much about it. Describe your problem in more detail. Rather, you've definitely made a mistake.
Click to expand...
Click to collapse
So my problem is i do all the steps in the guide were I get stuck is at the part were u have to do the bcdedit for the test mode to trun its one of the last steps be for u can boot up windows like i made the esp partition correctly like I use parted on the computer format both like resized the partition the user data partition made the windows partition and then the ESP partition and then after that part I do the Windows installation where you you know do the install that when thing then the drivers and then before the drivers you have to do that BCD edit for the for the boot files and then like every time I try to open the EFI partition like double click on it with a mouse it says something about security that I don't have permissions and then I try to left click go to properties and then there's no security Tab the uefi partition just wont let me acces it at all I just dint now what step im doing wrong thanks for the reply
Did touch screen work on mi mix 2s cuz i got windows to load but touch dose not work I installed all the divers i dont if its cuz i didnt flash that devcfg file i just did now im redeploying window's and its drivers
I was able to get it I have it fully working
Chris3445 said:
I was able to get it I have it fully working
Click to expand...
Click to collapse
Cool, sorry I didn't help, but I completely forgot about your problem. I'm glad it worked out for you
Mazoch said:
Cool, sorry I didn't help, but I completely forgot about your problem. I'm glad it worked out for you
Click to expand...
Click to collapse
Thanks man the only thing I have a issues with is pluging usb mouse and key bord do u now if there is any way to fix that. Its ok it tought me alot wen trying to install windows on it tho
Chris3445 said:
Thanks man the only thing I have a issues with is pluging usb mouse and key bord do u now if there is any way to fix that. Its ok it tought me alot wen trying to install windows on it tho
Click to expand...
Click to collapse
Unfortunately there is no OTG support for our phone, for the time being you can forget about it. It's also impossible to transfer video with a USB-C cable. Currently, this Windows is such more of a curiosity than a useful system
Do u have usb working I think i was useing tue wrong boot loader or something cuz the newer bootloader works really well with usb there is a way to get usb c to displayed to a monitor i seen. It on telegram and I did fet usb to work its pretty usable for now just not sound yet this project is really dope tho u have to say
I also was wondering if there was a way to flash the boatloader to the phone so i dont have to keep pluging it in the computer
Question,
When trying to reboot to Windows it will eventually blue screen with the message : Stop Code: Driver PNP WATCHDOG. I read thats because I have not flashed the file : http://files.renegade-project.org/devcfg-polaris_FixTS.img
When I try I get the below:
Warning: skip copying devcfg_ab image avb footer (devcfg_ab partition size: 0, devcfg_ab image size: 38444).
Sending 'devcfg_ab' (37 KB) OKAY [ 0.008s]
Writing 'devcfg_ab' OKAY [ 0.004s]
Finished. Total time: 0.031s
Assume the Warning is the problem, I tried resetting everything to stock with the mi flash tool. This was great for my Chinese language skills but the warning still shows when I try to flash.
other laptop, different cable, same thing.
Any advice ?