Database Develop

[Q] Galaxy Tab not booting, stuck at boot screen, download mode working

My Tab is stuck at GalaxyTab Samsung" boot screen after i try to flash Roto-JMI-v2, before i was running Overcome v1.1.2 rom and [Kernel] [EURO] [1.4ghz OC/UV] MCR EXT4 v12 and it work like a charm. But becurse i deside to sell my TAB i flash back to Roto JMI.
I flash with Odin 1.7 with success, but now it stuck at boot logo.
After that I try many other ROM and flash with Heimdal but no lock.
I have no problem to get download mode, and flash with odin and Heimdal. But I can't get into recovery mode (power+vol up)
I have try almost every solution in the Forum...
What to do next...??

Have you tried flashing kernel only? like the overcome kernel v1.0?
Perhaps that will get you ClockWorkMod Recovery back...and you can go from there.

I try it now, shall i use odin or Helmdall to flash kernel only

With overcome kernel v1.0 it fail in Odin

That's odd. Odin should flash the kernel fine.
Does it give an error? or it just says successful, but you still cannot get into CWM?

It give a error, and I still cannot get into CWM, shall i use a pit to flash

And I have try this....
1.Get a stock rom package (any of Rotohammer's firmwares will work)
2.Get P1_add_hidden.zip attached to this post and extract the P1_add_hidden.pit file
3.Using Odin 1.7, put stock rom (Roto-JME-Full-v4.tar for example) in PDA slot.
4.Put P1_add_hidden.pit in Pit slot
5.Check repartition box
6.Put Tab in download mode by holding Volume Down and Power, connect to the computer, and press start.
7.After this, the Tab will reboot normally. Shut it down and return to download mode.
8.Open Odin 1.7 and reconnect the Tab.
9.In the PDA slot, choose the Overcome Kernel v2.0 tar file for use with Odin. Press start
10.It will flash the kernel then reboot. Upon reboot, you should hear the sexy robot voices informing you of the status of the EXT4 conversion.
11.Once done, the Tab will boot normally. At this point you can load Overcome v1.2.2 rom (or any other Rom of your choosing)
12.NOTE - Overcome 1.2.2 includes v2.0 of the kernel, so no reflashing is required after install.

Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge. Can i only upgrade to kernel 2 when i have a JM* (Rotohammer rom?)

This is very weerd, other with some god solution

NN1123 said:
This is very weerd, other with some god solution
Click to expand...
Click to collapse
You are correct - he needs to repartition the sd card, using the .pit file because it was formatted to ext4.
Your steps are great! I do them one at a time with a reboot between each one.

sreins said:
Hi,
I try this from Samsung stock ROM P1000JK5 and i stuck on the Samsung boot imge.
Click to expand...
Click to collapse
Oops - if you got your rom from samsung you have a locked bootloader. You can continue to flash those updates, or you can use a patch to remove the lock, then you can continue on.
Can someone please paste the link to the patch?

how about the Verizon gtab...
same thing is happening to me on the galaxy tab from verizon... samsung says to send it.. but i dont want to wait two weeks without my tab... thanks..

Stuck in Bootup Screen
I also have same problem,
I flashed a Rom from "samfirmware" and after it finished it stuck on bootup screen, unable to do recovery mode.
only goes to bootup screen or Dawnload .
can you guys help ?

You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.

Stuck in Bootup Screen
thanks
but I can not get the tab to load in order to run any app. it is stuck in boot screen. any suggestion ?

You cannot get into download mode? That is power + volume down.
Do you know of the adb program?

stuck on bootup screen
I havent used ADB before.
any other solution?

rangercaptain said:
You gentlemen have a locked bootloader. If you search the tab development forum you will find the solution. A member named Chainfire developed an app you download to your sd card, then install it, then run it, and it will move the offending bootloader. I can't get the link here - google "locked bootloader patch" or posts by Chainfire.
When it is removed, don't flash roms with the samsung kies - all those roms have the locked bootloader.
Click to expand...
Click to collapse
how install apk boot pacth phone only samsung logo or only enter download mode how install boot patch ?

newbie comes here to learn how to flash kernel.

Problem with the original ROM ?

Hello,
my tablet is "rooted" and the kernel is modified by cyanogen (9) and the android version is 4.04.
i come from BELGIUM
I download the original SamMobile rom "P7310XXLPP_P7310XEFLP1_HOME.tar.md5"
I used ODIN 3.04 in download mode, load the file in PDA
Everything is ok, no error message. but the tablet displays rows of glittering colors at the end of flash
It restarts normally original video startup samsung samsung + original logo. the problem is that it remains frozen on the logo!!
I tried again the same operation with the same result.
I can still access the "download mode."
What should I do? Reinstall another rom?
thks you for your help

jfsyl said:
Hello,
my tablet is "rooted" and the kernel is modified by cyanogen (9) and the android version is 4.04.
i come from BELGIUM
I download the original SamMobile rom "P7310XXLPP_P7310XEFLP1_HOME.tar.md5"
I used ODIN 3.04 in download mode, load the file in PDA
Everything is ok, no error message. but the tablet displays rows of glittering colors at the end of flash
It restarts normally original video startup samsung samsung + original logo. the problem is that it remains frozen on the logo!!
I tried again the same operation with the same result.
I can still access the "download mode."
What should I do? Reinstall another rom?
thks you for your help
Click to expand...
Click to collapse
wipe data and cache

safariking said:
wipe data and cache
Click to expand...
Click to collapse
thank you for your quick response
I do not have recovery, but I still have the download, I flash a stock or modified recovery with odin ?

jfsyl said:
thank you for your quick response
I do not have recovery, but I still have the download, I flash a stock or modified recovery with odin ?
Click to expand...
Click to collapse
flash 5.5.0.4 from alterbridge86 make sure you flash the correct one!

THIS ONE ?
http://forum.xda-developers.com/showthread.php?t=1312218
1) Download the attached ClockworkMod_Recovery_v5.5.0.4.tar
2) Reboot the tab into download mode
3) Fire up Odin 1.85 and put the ClockworkMod_Recovery_v5.5.0.4.tar in the PDA field.
4) Flash!
5) Reboot into ClockworkMod Recovery
only the TAR on Download mode with odin i think...
please confirm ? thks you

jfsyl said:
THIS ONE ?
http://forum.xda-developers.com/showthread.php?t=1312218
1) Download the attached ClockworkMod_Recovery_v5.5.0.4.tar
2) Reboot the tab into download mode
3) Fire up Odin 1.85 and put the ClockworkMod_Recovery_v5.5.0.4.tar in the PDA field.
4) Flash!
5) Reboot into ClockworkMod Recovery
only the TAR on Download mode with odin i think...
please confirm ? thks you
Click to expand...
Click to collapse
Yes that´s right after booting in to recovery wipe data cache and dalvik cache and tablet will boot up just fine this is normal with stock samsung rom´s

[Q] i9070 16gb Stuck at boot logo, not booting to recovery (getting buffer logo)

Galaxy s Advance i9070 16gb Stuck at boot logo, not booting to recovery (getting buffer logo), going to download mode.
Things i performed.
1.Service center guys told no hardware issue. Tried Jtag.
2.Tried odin Jellybean Stock (single pda file, tried twice with and without pit file),flash successful still stuck at boot logo and not booting to recovery.
3.Tried Flashing Diffrent Jellybean Bootloader via odin. Dint work.
3.Tried downgrading to Gingerbread through odin(single pda file,tried twice with and without pit file),flash successful still stuck at boot logo and not booting to recovery.
4.After downgrading to GB tried flashing Twrp kernel.tar through odin. Flash successful only counter got raised, problem still exist.
Only thing that's working is download mode, Recovery doesn't work (getting buffer logo) And Phone Doesn't boot not even boot animation , Its stuck at boot logo that says galaxy s advance.
When connected to charger or usb getting that buffer symbol,Doesn't shows battery charging icon.
May be separate pda files that has bootloader,phone,modem&csc will work? Cause i tried single pda file and was unable to find separate files.
Please Help.

Hello,
Go here and download PIT for your device. Go in SamMobile and download a package for your device (I suggest I9070XXLQL baseband) doesn't matter if you already own it, download a new one. Extract .tar.md5 from downloaded package, open Odin and press PDA (AP in Odin versions after 3.07) button choosing extracted .tar.md5 file, press PIT button and choose PIT file extracted from ZIP package of that thread, tick "Repartition" option in Odin and flash
Inviato dal mio GT-I9505

AntaresOne said:
Hello,
Go here and download PIT for your device. Go in SamMobile and download a package for your device (I suggest I9070XXLQL baseband) doesn't matter if you already own it, download a new one. Extract .tar.md5 from downloaded package, open Odin and press PDA (AP in Odin versions after 3.07) button choosing extracted .tar.md5 file, press PIT button and choose PIT file extracted from ZIP package of that thread, tick "Repartition" option in Odin and flash
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
Tried Dint help. :crying:

pp_prathap said:
Tried Dint help. :crying:
Click to expand...
Click to collapse
Does Odin recognise your device? Did it flash the firmware or did the process fail?
Sent from Italy using Tapatalk

Toni5830 said:
Does Odin recognise your device? Did it flash the firmware or did the process fail?
Sent from Italy using Tapatalk
Click to expand...
Click to collapse
Yes NO Download Mode Works And Detects .Flashing also completes successfully. But Doesnt Boot.

i9070 hang on boot
Hey every body....I'm in a situation that I cannot boot in recovery but my phone can still goes into download mode using USB jig.....I had flashed my phone more than 3 times but m still in a boot loop.
Any reply will be appreciated.....

recovery bootloop with N910T

Hello all developers
the problem start when my friend ask me to fix his mobile
the first look to the mobile is
when i click power on it's show Samsung logo with this word at the left top( recovery booting ... )then reboot after 2 seconds at-least
i have download the latest official Rom 5.1.1 from sammobile
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME
after flash with odin i remember that is must complete the installation after first reboot with android logo but there is nothing happened !! its always reboot with the same word ( recovery rebooting )
I have tired to flash many Roms
Many BL
Many Modem
try to flash PIT File and the same
try Emergency with Kies and nothing changed
Kies give me this information when i put the model
PDA : OK2 / CSC : OK2 / PHONE : OK2 (TMB)
the all info about this mobile :
Model : SM-N910T
S/N : RF8FC131QYY 14.12
IMEI : 356095064430028
when i enter Odin Mode thats appear
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-910t
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
KNOX WARRANTY VOID : 0x1 (4)
QUALCOMM SECUREBOOT : ENABLE (CBS)
RP SWREV : S1, T1 , R1 , A2 , P1
SECURE DOWNLOAD : ENABLE
UDC START
please help me to fix it with any rom ... I can't go recovery mode but i can go download mode with ODIN

Any help please

i have the same issue but im on verizon. Also kies doesnt recognize my phone and I can't get to recovery. Any help would be appreciated. otherwise i just have an expensive paperweight.

Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0

Had the same issue i tried all kinds of roms stock and custom nothing seemed to work bought a new battery didnt make a diff now my phone is dead

noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Can you share PIT file for 910t? My phone is just keep bootcycle no matter what I do with ODIN, and try to flash ROM after ODIN, it bombs out, and boot cycle...
Thanks.

I am stuck with the same thing
any help would be great I am some what of a noob to this

Anyone had luck solving this problem?

noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Link plz

waleedy said:
Link plz
Click to expand...
Click to collapse
I'm having the same problem. I'm not getting any errors, and I found and flashed the PIT file with the stock firmware. Still no boot. It just sits on the boot up screen. No recovery, no battery icon...no nothing.

After flashing custom rom/recovery, everything back to stock

Hello
im searching thru the forum for 2 days and i dont find the solution...
i have working device but somehow system got buggy ...
every time i restart i must re-check developer options and usb debug ...
after uninstaling app the came back after restar
i have tried to flash almost every recovery and rom (stock or custom, its the same) i found with odin and Samsung Galaxy S3 Mini ToolKit
and on both says that the flash went good but nothing is happening ...
i flash the param_I8190, still nothing...
i dont have stock recovery, i only can go into download mode
im using win 10 64
what am i missing ?
thank you

Did you ever boot into recovery? Power off after flashing twrp recovery. Press vol+ home power at once.

kurtn said:
Did you ever boot into recovery? Power off after flashing twrp recovery. Press vol+ home power at once.
Click to expand...
Click to collapse
i`ve never manage to enter to recovery...
i flashed the recovery ( either stock or twrp) hit the 3 button combo but no recovery, just a samsung logo

i also tried with flashing param
param file
goldenxx PIT file
WIPE_I8190.tar.md5,
los14.1_golden.nova.20171215.ODIN_TWRP.tar.md5
stock rom
and nothing is changing... every time it boots into ****ty buggy rom...
i cant even perform nand erase...

Grnchar said:
i also tried with flashing param
param file
goldenxx PIT file
WIPE_I8190.tar.md5,
los14.1_golden.nova.20171215.ODIN_TWRP.tar.md5
stock rom
and nothing is changing... every time it boots into ****ty buggy rom...
i cant even perform nand erase...
Click to expand...
Click to collapse
You are flashing md5 files? What size?

kurtn said:
You are flashing md5 files? What size?
Click to expand...
Click to collapse
some of the files
(stock firmware) I8190XXANR6_I8190DTMANE3_HOME.tar.md5 -> 1.18 GB
los14.1_golden.nova.20171215.ODIN_TWRP.tar.md5 -> 575 MB
I8190_stock-recovery.tar.md5 -> 6.75 MB
twrp2.8_golden.nova.20140911.tar.md5 -> 7.90 MB

also flashed
i8190_buttonenable_cwm6.0.2.7.tar
i8190_buttonenable_cwm6.0.2.7.tar.md5
still no effect

Grnchar said:
also flashed
i8190_buttonenable_cwm6.0.2.7.tar
i8190_buttonenable_cwm6.0.2.7.tar.md5
still no effect
Click to expand...
Click to collapse
Can you power off directly after flashing twrp? Any error messages?

kurtn said:
Can you power off directly after flashing twrp? Any error messages?
Click to expand...
Click to collapse
After flashing, odin says pass
If auto restart is checked on odin, phone restarts and boot to rom
After flashing, using power button can be powered off
But when I try to boot into recovery using 3 button combination, it gets stuck at the boot logo

Hi!
Could the model of the device be anything else?
Did you open the cover and look at the model of the device?
Sometimes the firmware and the actual model of the device are not the same.
-Crazy