Related
Hello guyz,
I m using philz touch recovery and tried aosb, cm 11, etc but each rom had one or the other problem in it.
1.Can I install the 4.1.2 mex retail zip after a wipe and clean or do i have to go back to earlier version of the recovery?
Which are the most stable roms out yet? Where everything works great... like in the mex retail and the ics. Which has some good dev options in it like paranoid android
Well, hate to say this, but every custom (non-stock) rom, regardless of Android version, has some sort of an issue. You either gotta find one that you can live with or stay stock. HoloBlur is probably what you're looking for -- Custom based on Mex Retail. Going back to stock, you're better of just flashing a fastboot with Myth and skipping the recovery flash, boot into recovery and let it root it for you as well as fix the recovery crap in /etc.
swapnil0545 said:
Hello guyz,
I m using philz touch recovery and tried aosb, cm 11, etc but each rom had one or the other problem in it.
1.Can I install the 4.1.2 mex retail zip after a wipe and clean or do i have to go back to earlier version of the recovery?
Which are the most stable roms out yet? Where everything works great... like in the mex retail and the ics. Which has some good dev options in it like paranoid android
Click to expand...
Click to collapse
shouldnt you have a backup of stock so you could restore it and then just wipe data?
and i use cm11 cause the only 2 problems i have is a) the kit kat wifi issue and b) google play music will restart the phone if the screen is off. by cm 11 i mean the "official latest nightly) which was released a month ago and runs ten times faster than slim kat or any other rom ive used so far.
russian392 said:
shouldnt you have a backup of stock so you could restore it and then just wipe data?
and i use cm11 cause the only 2 problems i have is a) the kit kat wifi issue and b) google play music will restart the phone if the screen is off. by cm 11 i mean the "official latest nightly) which was released a month ago and runs ten times faster than slim kat or any other rom ive used so far.
Click to expand...
Click to collapse
Hey whats the kit kat wifi issue and do think it will get sorted out soon? Im also trying to decide what rom to install looking for something stable like op.
I can't seem to find a recovery that will flash a rom for MY phone. I have the MetroPCS version/variant of the sgh-t599n and I really want to be able to flash a custom rom to my phone, but I can't seem to find anyone with (codinMetroPCS) files for it. The only reason I say that is because when I finally got CWM 6.0.3.2 downloaded and working, tried to flash beanstalk rom and it told me "THIS ROM IS FOR CODINALTE PHONES NOT CODINMETROPCS PHONES" Is there a different rom for the Metro phones? Or am I doing something wrong....Im rooted through cydiaimpactor, well, i guess technically through the pre-rooted stock rom I had to flash through Odin...BTW-Over the last two weeks I've learned that flashing a rom on a samsung (at least mine) takes a custom recovery, which needs to be flashed via Odin (something I didn't know how to do at the time)...I almost feel like Im starting to get confused with all these different programs needed to run or flash or download this or that....I'm not sure if the info is even in the correct order in my head......could someone please walk me through this? or call me! lmao...this is giving me a headache. lol....but I REALLY REALLY want to know what Im doing.....ANYONE? PLEASE??
Cdbarron727 said:
I can't seem to find a recovery that will flash a rom for MY phone. I have the MetroPCS version/variant of the sgh-t599n and I really want to be able to flash a custom rom to my phone, but I can't seem to find anyone with (codinMetroPCS) files for it. The only reason I say that is because when I finally got CWM 6.0.3.2 downloaded and working, tried to flash beanstalk rom and it told me "THIS ROM IS FOR CODINALTE PHONES NOT CODINMETROPCS PHONES" Is there a different rom for the Metro phones? Or am I doing something wrong....Im rooted through cydiaimpactor, well, i guess technically through the pre-rooted stock rom I had to flash through Odin...BTW-Over the last two weeks I've learned that flashing a rom on a samsung (at least mine) takes a custom recovery, which needs to be flashed via Odin (something I didn't know how to do at the time)...I almost feel like Im starting to get confused with all these different programs needed to run or flash or download this or that....I'm not sure if the info is even in the correct order in my head......could someone please walk me through this? or call me! lmao...this is giving me a headache. lol....but I REALLY REALLY want to know what Im doing.....ANYONE? PLEASE??
Click to expand...
Click to collapse
Just flash the recovery listed in the BeanStalk thread.
There's 3 variants of the phone; T599, T599N, T599V (codinatmo, codinametropcs/codinanewcotmo, codinavid) they're pretty much the same exact phone, there's just slight differences in proprietary files - so the developers decided to unify the all of them into one (codinalte), as it's easier to build for one phone then three seperate times. The recovery's responsible for the phone; which is why the recovery plays a key-role, basically the recovery you have right now can only accept roms that are specifically 'titled' as codinametropcs, and by flashing that recovery, you'll be able to flash any of the 4.4.x roms (BeanStalk, Vanir, OmniROM, CM, AOKP, and soon pure-vanialla AOSP).
ok so....
Exothermic said:
Just flash the recovery listed in the BeanStalk thread.
There's 3 variants of the phone; T599, T599N, T599V (codinatmo, codinametropcs/codinanewcotmo, codinavid) they're pretty much the same exact phone, there's just slight differences in proprietary files - so the developers decided to unify the all of them into one (codinalte), as it's easier to build for one phone then three seperate times. The recovery's responsible for the phone; which is why the recovery plays a key-role, basically the recovery you have right now can only accept roms that are specifically 'titled' as codinametropcs, and by flashing that recovery, you'll be able to flash any of the 4.4.x roms (BeanStalk, Vanir, OmniROM, CM, AOKP, and soon pure-vanialla AOSP).
Click to expand...
Click to collapse
?
When you say flash....you mean through Android System Recovery (stock recovery)? right? ....sry man...back when i was rooting my droid x, I never ran into any issues and it seemed a little easier to flash roms
Cdbarron727 said:
?
When you say flash....you mean through Android System Recovery (stock recovery)? right? ....sry man...back when i was rooting my droid x, I never ran into any issues and it seemed a little easier to flash roms
Click to expand...
Click to collapse
flash it through odin.
Thank you....now....I think I've actually gotten this far already.....had cwm installed...then tried to flash beanstalk with cwm and I got the codin error saying "this is not for codinmetropcs" ...if I get that problem again...is there something conflicting with it in some way? Or where did I go wrong? do i have to have twrp?
sorry to bug bro
Exothermic said:
Just flash the recovery listed in the BeanStalk thread.
There's 3 variants of the phone; T599, T599N, T599V (codinatmo, codinametropcs/codinanewcotmo, codinavid) they're pretty much the same exact phone, there's just slight differences in proprietary files - so the developers decided to unify the all of them into one (codinalte), as it's easier to build for one phone then three seperate times. The recovery's responsible for the phone; which is why the recovery plays a key-role, basically the recovery you have right now can only accept roms that are specifically 'titled' as codinametropcs, and by flashing that recovery, you'll be able to flash any of the 4.4.x roms (BeanStalk, Vanir, OmniROM, CM, AOKP, and soon pure-vanialla AOSP).
Click to expand...
Click to collapse
I just flashed cwm through odin and it passed....I havn't rebooted just yet, but I know it was working before.... But just saw that the cwm I downloaded from the beanstalk thread says its for kitkat builds only. My phone is running 4.1.2..does that matter? or does that mean I just need a 4.4 rom to be flashed with it? Sorry if these are dumb questions
Cdbarron727 said:
I just flashed cwm through odin and it passed....I havn't rebooted just yet, but I know it was working before.... But just saw that the cwm I downloaded from the beanstalk thread says its for kitkat builds only. My phone is running 4.1.2..does that matter? or does that mean I just need a 4.4 rom to be flashed with it? Sorry if these are dumb questions
Click to expand...
Click to collapse
It's cool; it just means you can only flash 4.4 roms, so you cannot flash cm10.1, cm10.2, and pac. It doesn't matter that your phone's running 4.1.2.
I am at a standstill installing CM11 off of the moto_msm8960 unified CM11 builds. Here's what I have accomplished so far:
Root and unlock bootloader with motochopper and motopocalypse
Install CWM Touch v.6.0.4.4 per the CM tutorial here.
Download a nightly CM11 build and remove Status 7 error per the tutorial here.
Backup stock AOSP ROM with CWM to external SD
My issue now is that I cannot install the ROM through CWM because my bootloader is not 4.4. Could someone guide me in updating the kernel to a KK based one so that I can install?
Edit:I realized while reading another thread that my problem it that the CM website has misreported the rom to use and that I have to use the moto_msm8960 jbbl branch, as the bootloader can only be upgraded if Moto releases a (the?) KK upgrade officially.
IanPPK said:
Edit:I realized while reading another thread that my problem it that the CM website has misreported the rom to use and that I have to use the moto_msm8960 jbbl branch, as the bootloader can only be upgraded if Moto releases a (the?) KK upgrade officially.
Click to expand...
Click to collapse
That's right, you can flash the jbbl branch, it works good. Use that until we recieve the KitKat upgrade.
mauchito said:
That's right, you can flash the jbbl branch, it works good. Use that until we recieve the KitKat upgrade.
Click to expand...
Click to collapse
I intend to flash nightlies. Quick question though, do I have to do a nandroid backup in CWMR, factory reset/wipe, and then flash the new nightly, or can the new nightly flash like an update.zip? I am currently doing the process I mentioned above and don't want to risk bricking, if there is any risk.
IanPPK said:
I intend to flash nightlies. Quick question though, do I have to do a nandroid backup in CWMR, factory reset/wipe, and then flash the new nightly, or can the new nightly flash like an update.zip? I am currently doing the process I mentioned above and don't want to risk bricking, if there is any risk.
Click to expand...
Click to collapse
It is optional to do a nandroid backup, I would usually do this when I am still running stock ROM but it is up to you. You can either clean flash or dirty flash, I don't believe it'll brick your device. I usually clean flash, it is just me. Good luck!
IanPPK said:
I intend to flash nightlies. Quick question though, do I have to do a nandroid backup in CWMR, factory reset/wipe, and then flash the new nightly, or can the new nightly flash like an update.zip? I am currently doing the process I mentioned above and don't want to risk bricking, if there is any risk.
Click to expand...
Click to collapse
Just a little reminder: You can OTA nightly to nightly and snapshot to snapshot without almost any risk of bricking your device, but when you change from nighty to snapshot or viceversa, you forcefully need to wipe everything. Or you'll get a nasty bootloop.
So I finally got me a sweet deal and got a second hand XT1053.
Unlocked its bootloader, then flashed T-Mobile´s 4.4.3 and finally the OTA to 4.4.4, because here in Mexico all I was able to get was 4.4.2.
Now, I want to try custom ROMs, and Ive been reading about the procedure.
As any sane person would, I want a nandroid backup before messing around. Im guessing flashing TWRP will take care of this, like it did with my LG L9, right?
Is it wise to do this on the verge of Android L being ported to our Moto X?
How difficult is it to get the phone to a fully stock state (minus the bootlader, of course)? As far as I know, I only need to flash my nandroid backup then flash the stock recovery. Is it as simple as that?
I read somewhere that flashing custom ROMs messed up with Motorola´s active display/voice control, and I assumed they meant that custom ROMs lacked these features because of their proprietary nature. Am I correct? Or does some kind of unrepairable damage will forever afflict these features, even if I get back to stock?
And lastly, what ROM do you recommend? I´d like the active display feature if possible, guess I can do without it. CM theme chooser would be nice too.
Thanks in advance, eagerly awaiting some answers before I take a step forwards.
Attached a screenshot of my phone´s info.
You are right about everything you've mentioned. Good research done for sure! ?
Do a backup with twrp. And yes, you can restore it and flash the stock recovery and you're good for the OTA.
Aosp/cm roms don't have the Moto features. But yes, you can return to stock and have them again. There's a few stick based custom roms that of course still have the features. The other roms, unless something changed, do come with some bugs unfortunately as well.
Most use stock, with gravity box for customizing.
And in case you missed it.... Never try to downgrade from 4.4.4....or you risk your device bricking. You can flash lower version custom roms, cause they won't try to change the bootloader. But don't downgrade stock firmware. Ever. ?
Enjoy!
Thank you very much!
As soon as I read this I rooted my phone, I´ll check a ROM or two before settling on one for daily use, have heard nice things about krypto´s one.
And yeah, there can never be enough warnings, I´ll treat the T-Mobile stock ROM as if it were my very first one.
One question though, the latest version of T-Mobile firmware is 4.4.3 under http://sbf.droid-developers.org/phone.php?device=0 so Im gussing I should only use my nandroid backup, right?
Thanks in advance!
no_un_bot said:
Thank you very much!
As soon as I read this I rooted my phone, I´ll check a ROM or two before settling on one for daily use, have heard nice things about krypto´s one.
And yeah, there can never be enough warnings, I´ll treat the T-Mobile stock ROM as if it were my very first one.
One question though, the latest version of T-Mobile firmware is 4.4.3 under http://sbf.droid-developers.org/phone.php?device=0 so Im gussing I should only use my nandroid backup, right?
Thanks in advance!
Click to expand...
Click to collapse
Until there's a 4.4.4 SBF, yes. That's the safest bet.
newbie needs details
no_un_bot said:
So I finally got me a sweet deal and got a second hand XT1053.
Unlocked its bootloader, then flashed T-Mobile´s 4.4.3 and finally the OTA to 4.4.4, because here in Mexico all I was able to get was 4.4.2.
Now, I want to try custom ROMs, and Ive been reading about the procedure.
As any sane person would, I want a nandroid backup before messing around. Im guessing flashing TWRP will take care of this, like it did with my LG L9, right?
Is it wise to do this on the verge of Android L being ported to our Moto X?
How difficult is it to get the phone to a fully stock state (minus the bootlader, of course)? As far as I know, I only need to flash my nandroid backup then flash the stock recovery. Is it as simple as that?
I read somewhere that flashing custom ROMs messed up with Motorola´s active display/voice control, and I assumed they meant that custom ROMs lacked these features because of their proprietary nature. Am I correct? Or does some kind of unrepairable damage will forever afflict these features, even if I get back to stock?
And lastly, what ROM do you recommend? I´d like the active display feature if possible, guess I can do without it. CM theme chooser would be nice too.
Thanks in advance, eagerly awaiting some answers before I take a step forwards.
Attached a screenshot of my phone´s info.
Click to expand...
Click to collapse
hello, i a newbie to all of this
i have the same device as yours, how did you do that? details if it not much trouble
sherif2015 said:
hello, i a newbie to all of this
i have the same device as yours, how did you do that? details if it not much trouble
Click to expand...
Click to collapse
Hi there, Im at work and cannot explain in much detail, but when I get home i will help you out.
You can send me a private message if you want me to explain in español.
no_un_bot said:
Thank you very much!
As soon as I read this I rooted my phone, I´ll check a ROM or two before settling on one for daily use, have heard nice things about krypto´s one.
And yeah, there can never be enough warnings, I´ll treat the T-Mobile stock ROM as if it were my very first one.
One question though, the latest version of T-Mobile firmware is 4.4.3 under http://sbf.droid-developers.org/phone.php?device=0 so Im gussing I should only use my nandroid backup, right?
Thanks in advance!
Click to expand...
Click to collapse
SBF.Droid-Developers.org hasn't been updated in a while, at least as far as the X (2013 or 1st Gen edition) Roms.
Another possible source is -> http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1 however, they don't have a 4.4.4 SBF for the XT1053 either.
And you can keep an eye on https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images since Moto should post the 4.4.4 SBF for the Developer Editions. Eventually an XT1053 (GSM) and an XT1060(VZW) 4.4.4 should pop up there, whenever Moto finally gets around to it.
no_un_bot said:
Hi there, Im at work and cannot explain in much detail, but when I get home i will help you out.
You can send me a private message if you want me to explain in español.
Click to expand...
Click to collapse
Hi sorry for bothering you but i really need your help.
English will be fine .
other users might get here so it will be nice to help them as well
thanks for your time
sherif2015 said:
Hi sorry for bothering you but i really need your help.
English will be fine .
other users might get here so it will be nice to help them as well
thanks for your time
Click to expand...
Click to collapse
Alright, guess everything is out there but I don´t mind.
Can you tell me what system version have you got?
Its displayed under Settings > About phone
reply
no_un_bot said:
Alright, guess everything is out there but I don´t mind.
Can you tell me what system version have you got?
Its displayed under Settings > About phone
Click to expand...
Click to collapse
Kitkat 4.4.2 xt1053
same phone, problems loading roms
I have the same phone, I also recently got second hand.
Moto x xt1053 (gsm) carrier unlocked, currently in kitkat4.4.2, running Kangakat 2 rom (came with it), unlocked bootloader, rooted and using SuperSU, newest version of twrp like 2.8 or something like that.
I want to load a custom rom but am having problems, downloaded P.A.C. and AOKP (two i have tried to use) for the device msm8960 using there stable versions not the nightlies. Went into twrp, created backup, factory wiped, flashed rom and g-apps, was "successful" no errors but on reboot of phone it gets stuck in boot loop and won't start up. for the P.A.C i was able to get into twrp and reflash my back up, for the AOKP twrp kept getting stuck on that teamwin image and i could only finally access it by having the usb cable plugged into my computer. I am not a noob, but definately not an expert.
So did you have any luck flashing a new rom to your phone? Does anyone have any advice for me? I really would like to try some different roms.
Thanks
[emoji15]
I hate Tapatalk for all the time spent writing a quick reply and its gone.
Anyways, first of all, make sure you have the latest recovery available, I remember back with my old phone, funky installations happened if you weren't on the latest recovery. I recommend philz one, has support for some pesky partitions that sometimes get messed and other recoveries won't back up.
Now, in my particular case, I first upgraded my 4.4.2 Nextel stock to 4.4.3 T-Mobile stock using RSDLite, then took the OTA to 4.4.4, and until then I figured I'd play with ROMs. Have had no issues other than something I've addressed on another thread and I ultimately fixed.
My suggestion is going back to full stock then doing everything yourself so you know what's actually going on.
You'll have to flash a custom recovery and then root it again but with an unlocked bootloader that's ezpz.
Remember never to downgrade (that is, flashing a lower android version than what you currently run) stock official images (such as the ones from sbf-developers) because you WILL brick your phone. People say you can downgrade when flashing custom ROMs but I wouldn't risk it, and I don't really see why I'd want that.
Double check whatever file you'll try to flash, always use stuff intended for your model, and when that's not possible verify if other users with your model have reported it works for them. As per the version thing, I believe the most recent development unified models under the GHOST parameter but take my words for what they are, that is, my view on things, you should always make one for yourself.
Ask if you don't completely understand a step BEFORE doing it, there's good people willing to help you out.
Best of luck.
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.