Hi,i have rooted my P7 and when i try to install Busybox i obtain "It looks like the installation of BusyBox was not successful. Try installing to a different location,that may resolve the issue"
I tried to flash Busybox via TWRP but when i type the codes into terminal emulator i obtain "permission denied",or trying with "P7-Easy_Update_and_Adjust" the phone wasn't been found.How can i resolve this?I can't delete set_immutable.list (Sorry for my bad english)
Jt1995 said:
Hi,i have rooted my P7 and when i try to install Busybox i obtain "It looks like the installation of BusyBox was not successful. Try installing to a different location,that may resolve the issue"
I tried to flash Busybox via TWRP but when i type the codes into terminal emulator i obtain "permission denied",or trying with "P7-Easy_Update_and_Adjust" the phone wasn't been found.How can i resolve this?I can't delete set_immutable.list (Sorry for my bad english)
Click to expand...
Click to collapse
Flashable BusyBox Flash In TWRP and DONE !!
andromodgod said:
Flash In TWRP and DONE !!
Click to expand...
Click to collapse
It works,but after i delete set_immutable.list i reboot and that file is again here.
Jt1995 said:
It works,but after i delete set_immutable.list i reboot and that file is again here.
Click to expand...
Click to collapse
What OS are you On .... I Mean Like B613 or B619 .... what exactly ?? ..... and Also If You Could Provide me with Your Boot.img
andromodgod said:
What OS are you On .... I Mean Like B613 or B619 .... what exactly ?? ..... and Also If You Could Provide me with Your Boot.img
Click to expand...
Click to collapse
I have B621
Jt1995 said:
I have B621
Click to expand...
Click to collapse
Just Flash B621 Stock Advanced Kernel Provided by Araca from The Android Development Thread
andromodgod said:
Just Flash B621 Stock Advanced Kernel Provided by Araca from The Android Development Thread
Click to expand...
Click to collapse
I flash it,but set_immutable come back after reboot
You have to unlock bootloader.
Kostyan_nsk said:
You have to unlock bootloader.
Click to expand...
Click to collapse
his bootloader is already unlocked because he already flashed twrp.
---------- Post added at 07:14 AM ---------- Previous post was at 07:11 AM ----------
Jt1995 said:
I flash it,but set_immutable come back after reboot
Click to expand...
Click to collapse
go back to 609 then update 621. root your phone with the latest flashable supersu then install busybox.
majcomtech said:
his bootloader is already unlocked because he already flashed twrp.
Click to expand...
Click to collapse
It was, but now his bootloader has relocked again.
We can make sure of this if @ Jt1995 will provide content of /proc/cmdline file.
Kostyan_nsk said:
It was, but now his bootloader has relocked again.
We can make sure of this if @ Jt1995 will provide content of /proc/cmdline file.
Click to expand...
Click to collapse
Goin in fastboot mode there is "Phone Unlocked".It is unlocked since i bought it
Kostyan_nsk said:
It was, but now his bootloader has relocked again.
We can make sure of this if @ Jt1995 will provide content of /proc/cmdline file.
Click to expand...
Click to collapse
he didn't mentioned that his phone was bootloader locked. again, he answered andromodgod that he successfully flashed the TWRP. Remember, you cannot flash anything in bootloader if it is locked.
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
Jt1995 said:
Goin in fastboot mode there is "Phone Unlocked".It is unlocked since i bought it
Click to expand...
Click to collapse
all i can help is to do it again with fresh installation. go back to 609 and so on.
majcomtech said:
he didn't mentioned that his phone was bootloader locked. again, he answered andromodgod that he successfully flashed the TWRP. Remember, you cannot flash anything in bootloader if it is locked.
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
all i can help is to do it again with fresh installation. go back to 609 and so on.
Click to expand...
Click to collapse
majcomtech said:
his bootloader is already unlocked because he already flashed twrp.
---------- Post added at 07:14 AM ---------- Previous post was at 07:11 AM ----------
go back to 609 then update 621. root your phone with the latest flashable supersu then install busybox.
Click to expand...
Click to collapse
So i did this.I did a force update to B609,then i did a local update to B621.Next i installed TWRP and flash Super SU.I tryed to install BusyBox from Playstore but when i tap "install" there is an error,so i flash it with TWRP.So i open the program "P7-Easy_Update_and_Adjust" but it said "Wait for device..." so i installed terminal emulatore and typed:
su
mount -o rw,remount /system
cd system
lsattr
chattr -R -i *
rm –f /system/set_immutable.list
lsattr
The file is eliminated but after reboot is again here,again!
Jt1995 said:
Goin in fastboot mode there is "Phone Unlocked".It is unlocked since i bought it
Click to expand...
Click to collapse
majcomtech said:
he didn't mentioned that his phone was bootloader locked. again, he answered andromodgod that he successfully flashed the TWRP. Remember, you cannot flash anything in bootloader if it is locked.
Click to expand...
Click to collapse
Guys, believe me, "Phone unlocked" in fastboot mode doesn't mean that it's really so.
@Jt1995, Execute following in terminal emulator:
Code:
su
cat /proc/cmdline > /sdcard/cmdline.txt
Then take cmdline.txt from your internal storage and put its content here.
Kostyan_nsk said:
Guys, believe me, "Phone unlocked" in fastboot mode doesn't mean that it's really so.
@Jt1995, Execute following in terminal emulator:
Code:
su
cat /proc/cmdline > /sdcard/cmdline.txt
Then take cmdline.txt from your internal storage and put its content here.
Click to expand...
Click to collapse
Code:
mmcparts=mmcblk0:p1(mcuimage),p2(teeos),p3(log),p4(round),p5(fastboot2),p6(misc),p7(modemnvbkup),p8(nvme),p9(oeminfo),p10(splash),p11(modemnvm1),p12(modemnvm2),p13(modemimage),p14(dsp),p15(hifi),p16(modemlog),p17(boot),p18(recovery),p19(recovery2),p20(splash2),p21(cache),p22(3rdmodem),p23(hisitest0),p24(hisitest1),p25(hisitest2),p26(system),p27(cust),p28(userdata);mmcblk1:p1(ext_sdcard) mem_size=0x80000000 k3v2mem k3v2_ion=1 vmalloc=448M maxcpus=4 initcall_debug=n boardid=0x48690010,0x00000020,0x00000323 pd_charge=0 boottype=coldreset enter_recovery=0 efuse_status=1 androidboot.swtype=normal fastboot_version=P7-L10V100R001C00B621_FASTBOOT himntn=00000011100000000000000000000000 cma=0 isfullhd=1 density=480 tp_color=225 dsi_clk=486 logcat_enabled=false loglevel=4 bitmapofabnrst=0x00000010 pmu_nv_addr=0x7b205434 boot_slice=0x000177db fblock=locked boot_reason=cold_reset
mmcparts=mmcblk01(mcuimage),p2(teeos),p3(log),p4(round),p5(fastboot2),p6(misc),p7(modemnvbkup),p8(nvme),p9(oeminfo),p10(splash),p11(modemnvm1),p12(modemnvm2),p13(modemimage),p14(dsp),p15(hifi),p16(modemlog),p17(boot),p18(recovery),p19(recovery2),p20(splash2),p21(cache),p22(3rdmodem),p23(hisitest0),p24(hisitest1),p25(hisitest2),p26(system),p27(cust),p28(userdata);mmcblk11(ext_sdcard) mem_size=0x80000000 k3v2mem k3v2_ion=1 vmalloc=448M maxcpus=4 initcall_debug=n boardid=0x48690010,0x00000020,0x00000323 pd_charge=0 boottype=coldreset enter_recovery=0 efuse_status=1 androidboot.swtype=normal fastboot_version=P7-L10V100R001C00B621_FASTBOOT himntn=00000011100000000000000000000000 cma=0 isfullhd=1 density=480 tp_color=225 dsi_clk=486 logcat_enabled=false loglevel=4 bitmapofabnrst=0x00000010 pmu_nv_addr=0x7b205434 boot_slice=0x000177db fblock=locked boot_reason=cold_reset
Click to expand...
Click to collapse
Kostyan_nsk said:
Click to expand...
Click to collapse
So i must contact huawei for having to code to unlock bootloader?
Obviously
No...
You have to downgrade your phone to b133 or another emui 2.3 Rom.
Than use rootgenius and root your phone. After that you have an realy unlocked bootloader.
And after this you can update to the Rom of your chooise.
My tool easy update and adjust cant delete a file without busybox or full filesystem rights. I know that the error messages are ****. But its only a tool for fast flashing. I kept everything reenter any loss of hand.
Jt1995 said:
So i must contact huawei for having to code to unlock bootloader?
Click to expand...
Click to collapse
Just flash kernel unlocked. as i was said go back. if possible to the lower version or EMUI 2.3. there many kernel version totally unlocked. you don't need to contact huawei coz your phone bootloader is already unlocked.
Related
Files are in this link http://forum.turkdevs.com/konu-root-android-6-0-6-0-1-calisan-root-yontemi.html?pid=62642#pid62642
This method will work on 6.0 and 6.0.1
Extract files in adb folder
Enable usb debugging and oem lock
Open adb on your PC and execute "adb reboot bootloader"
Execute "fastboot flash boot newboot.img"
Execute "fastboot boot recovery-twrp.img"
Flash supersu via twrp and reboot system.
Thanks t_sasak for editing boot.img in TurkDevs Forums
nhmanas said:
Files are in this link http://forum.turkdevs.com/konu-root-android-6-0-6-0-1-calisan-root-yontemi.html?pid=62642#pid62642
This method will work on 6.0 and 6.0.1
Extract files in adb folder
Enable usb debugging and oem lock
Open adb on your PC and execute "adb reboot bootloader"
Execute "fastboot flash boot newboot.img"
Execute "fastboot boot recovery-twrp.img"
Flash supersu via twrp and reboot system.
Thanks t_sasak for editing boot.img in TurkDevs Forums
Click to expand...
Click to collapse
I thought i was able to successfully root my phone but after flashing SuperSU using TWRP i get a bootloop. HELP please!
Phone: Cherry Mobile One G1
OS: Android 6.0 Marshmallow
Build No: MRA58Y
Its working. THANKS!
PineappleOwl said:
Its working. THANKS!
Click to expand...
Click to collapse
what's your mobile phone?
kiksilog said:
what's your mobile phone?
Click to expand...
Click to collapse
Cherry Mobile G1 of Philippines
I haven't tried yet. I'm going to flash this today. People in TurkDevs developed and they're successful
Tengri biz menen
ricosuavehhh said:
I thought i was able to successfully root my phone but after flashing SuperSU using TWRP i get a bootloop. HELP please!
Phone: Cherry Mobile One G1
OS: Android 6.0 Marshmallow
Build No: MRA58Y
Click to expand...
Click to collapse
Did you unlock bootloader ? It has to be unlocked.
Yes i did enable OEM unlock bootloader in Developer Options
Choose correct boot file
ricosuavehhh said:
Yes i did enable OEM unlock bootloader in Developer Options
Click to expand...
Click to collapse
enable OEM unlock bootloader in Developer Options
enable USB Debugging Mode in Developer Options
unlock bootloder with "fastboot oem unlock-go" command
choose correct boot file (6.0.1 MMB29K or 6.0.0 MRA58Y)
you can find that files on first post link
---------- Post added at 08:17 PM ---------- Previous post was at 07:50 PM ----------
ricosuavehhh said:
Yes i did enable OEM unlock bootloader in Developer Options
Click to expand...
Click to collapse
what happend ?
cgtylpr said:
enable OEM unlock bootloader in Developer Options
enable USB Debugging Mode in Developer Options
unlock bootloder with "fastboot oem unlock-go" command
choose correct boot file (6.0.1 MMB29K or 6.0.0 MRA58Y)
you can find that files on first post link
---------- Post added at 08:17 PM ---------- Previous post was at 07:50 PM ----------
what happend ?
Click to expand...
Click to collapse
Thanks! i'll check if i did download the correct boot file
ricosuavehhh said:
Thanks! i'll check if i did download the correct boot file
Click to expand...
Click to collapse
Careful! Oem-unlock go command will wipe everything on your device including internal sd
Tengri biz menen
nhmanas said:
Careful! Oem-unlock go command will wipe everything on your device including internal sd
Tengri biz menen
Click to expand...
Click to collapse
You're right.
ricosuavehhh said:
You're right.
Click to expand...
Click to collapse
Problem solved ?
cgtylpr said:
Problem solved ?
Click to expand...
Click to collapse
I'm currently flashing boot.img, recovery.img... will update you later.
I flashed yesterday. It works like charm. And Xposed is working flawless
Tengri biz menen
nhmanas said:
I flashed yesterday. It works like charm. And Xposed is working flawless
Tengri biz menen
Click to expand...
Click to collapse
Nice
Thanks. Successfully flashed boot and superSU, running Xposed too, trying out modules. Thank you very much, OP.
Cherry Mobile One G1
MM 6.0.1
Just out of interest, what do your guys do, when the next OTA-Updates arrive...?
Xposed on mm causes random reboot.. Maybe because of modules I don't know
Tengri biz menen
vel_tins said:
Just out of interest, what do your guys do, when the next OTA-Updates arrive...?
Click to expand...
Click to collapse
Nothing these people who flashed twrp and rooted the phone can do when a new OTA arrives, except whine and hope that somebody is able to capture the OTA file and transform it to a twrp-flashable zip. :crying:
Lenovo K4 Note: Rooted
Recovery: TWRP 3.0.2
Android Version: 6.0
Stock Rom
a7010a48_s219_160810_row
I want to encrypt my phone, but when I do it nothing happens. Screen goes black, I waited for 5hrs .. still black screen.
I rebooted normally & saw in settings that device is not encrypted.
I am guessing this is happening because of TWRP.
Can anyone please upload stock recovery for above mentioned Android version?
Thank You.
Trushant said:
Lenovo K4 Note: Rooted
Recovery: TWRP 3.0.2
Android Version: 6.0
Stock Rom
a7010a48_s219_160810_row
I want to encrypt my phone, but when I do it nothing happens. Screen goes black, I waited for 5hrs .. still black screen.
I rebooted normally & saw in settings that device is not encrypted.
I am guessing this is happening because of TWRP.
Can anyone please upload stock recovery for above mentioned Android version?
Thank You.
Click to expand...
Click to collapse
Here you go. hit thanks if helped you.
iamironman91 said:
Here you go. hit thanks if helped you.
Click to expand...
Click to collapse
Hi. Thanks for replying.
I got following error in cmd while flashing:
writing 'recovery'...
FAILED <remote: image is not a boot image>
finished.
What's the code you put in adb
fastboot flash recovery recovery.img
Is this you used?
iamironman91 said:
What's the code you put in adb
fastboot flash recovery recovery.img
Is this you used?
Click to expand...
Click to collapse
Yes
Trushant said:
Yes
Click to expand...
Click to collapse
try this
iamironman91 said:
try this
Click to expand...
Click to collapse
Not working... same error.
Enable us debugging. Paste these codes in adb
fastboot erase recovery
fastboot flash recovery recovery.img
Let me know if works
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
Before that backup everything if something goes wrong
iamironman91 said:
Enable us debugging. Paste these codes in adb
fastboot erase recovery
fastboot flash recovery recovery.img
Let me know if works
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
Before that backup everything if something goes wrong
Click to expand...
Click to collapse
Same error.
The problem is with the recovery image.
Thank you for trying to help me.
Any senior member out there? Your assistance will be very much appreciated.
:good:
These imgs are from ota of s219, s208, s147 Lollipop.
Or may be you try downloading stock firmware and flash only recovery img via sp tools.
Ofcourse any senior member will have easiest solution
iamironman91 said:
:good:
These imgs are from ota of s219, s208, s147 Lollipop.
Or may be you try downloading stock firmware and flash only recovery img via sp tools.
Ofcourse any senior member will have easiest solution
Click to expand...
Click to collapse
I tried to flash only recovery via SP Tools but it sent my phone in boot loop, had to flash whole rom to get it working again.
Trushant said:
I tried to flash only recovery via SP Tools but it sent my phone in boot loop, had to flash whole rom to get it working again.
Click to expand...
Click to collapse
Flash is ok? What android_n_setup.zip version you have?after flashing,you can boot to stock?i think note the twrp causing this..
i want stock recovery s232
can i delete TWRP after installed
Telegram link for Lenovo k4 note plzz
@k4note
iamironman91 said:
:good:
These imgs are from ota of s219, s208, s147 Lollipop.
Or may be you try downloading stock firmware and flash only recovery img via sp tools.
Ofcourse any senior member will have easiest solution
Click to expand...
Click to collapse
Bro, just ask him to unzip "recovery.zip" and then use the "recovery.img" for flashing!
Simple thing, yet eazy to miss.
Hello,
i'm on Oxygen OS4.0.2, is there any way to root my phone without unlocking the bootloader and flashing twrp then superuser... etc?
bfm.95 said:
Hello,
i'm on Oxygen OS4.0.2, is there any way to root my phone without unlocking the bootloader and flashing twrp then superuser... etc?
Click to expand...
Click to collapse
Nope
the_rooter said:
Nope
Click to expand...
Click to collapse
Well, I read somewhere that you can root it without pc and with stock recovery by downloading a zip and renaming it to update.zip then flash it, is that right?
**UPDATE**
i unlocked my bootloader then flash twrp using the toolkit but when i boot to twrp recovery it stuck at logo screen, why?
bfm.95 said:
Well, I read somewhere that you can root it without pc and with stock recovery by downloading a zip and renaming it to update.zip then flash it, is that right?
**UPDATE**
i unlocked my bootloader then flash twrp using the toolkit but when i boot to twrp recovery it stuck at logo screen, why?
Click to expand...
Click to collapse
Learn adb fastboot and try that. 9 out of 10 times toolkits give issues.
the_rooter said:
Learn adb fastboot and try that. 9 out of 10 times toolkits give issues.
Click to expand...
Click to collapse
I think the problem is with this version of twrp because I tried to flash it without the toolkit and I got the same result, probably it's not working on 4.0.2
bfm.95 said:
I think the problem is with this version of twrp because I tried to flash it without the toolkit and I got the same result, probably it's not working on 4.0.2
Click to expand...
Click to collapse
What version did you TWRP flash?
---------- Post added at 09:44 PM ---------- Previous post was at 09:44 PM ----------
the_rooter said:
Learn adb fastboot and try that. 9 out of 10 times toolkits give issues.
Click to expand...
Click to collapse
Why would toolkits give issues!!?
Midomad said:
What version did you TWRP flash?
Click to expand...
Click to collapse
I flashed 3.0.3-1 the one which came with the toolkit
bfm.95 said:
I flashed 3.0.3-1 the one which came with the toolkit
Click to expand...
Click to collapse
How much time did you wait for TWRP to boot?
A device that is 30 gb full could take 10 minutes to boot!
Midomad said:
How much time did you wait for TWRP to boot?
Click to expand...
Click to collapse
I didn't know that I should wait! But I waited like 2-3 mins
bfm.95 said:
I didn't know that I should wait! But I waited like 2-3 mins
Click to expand...
Click to collapse
Just wait a few more time and let me know..
Midomad said:
Just wait a few more time and let me know..
Click to expand...
Click to collapse
Okay I'll try when I'm home
Midomad said:
What version did you TWRP flash?
---------- Post added at 09:44 PM ---------- Previous post was at 09:44 PM ----------
Why would toolkits give issues!!?
Click to expand...
Click to collapse
For your toolkit issue. I seen far too many times toolkit mess up for a user, and not work, and the user comes here looking for help to get their phone fixed, and they didn't take the time to learn adb/fastboot. Toolkits can be a good thing, but at the same time they can give a issue.
Midomad said:
Just wait a few more time and let me know..
Click to expand...
Click to collapse
I flashed twrp 3.0.3.0 and it worked but I couldn't flash supersu from my phone or adb sideload
**UPDATE**
i put the supersu zip in my phone but i can't reach the internal memory in twrp also i couldn't flash using sideload, when i type adb devices i get message (list of devices attached) then i went to enable mtp from twrp and typed adb devices and it recognized now, then i went to flash supersu via sideload and i got this message (error: device not found)
so is there any way to flash supersu?
**update**
i flashed twrp 3.0.3-1 again and i waited more time and it worked and i flashed supersu and everything works , sorry for being annoying and thanks for everything guys
Hello guys,
this is my first thread and I have a serious problem:
First, I unlock the bootloader and flash TWRP on it. It seems working, because every time it's booting there comes a message, that I can't trust this device, cause it's unlocked.
The problem is, when i go in fastboot mode, it says "FRP locked") and in the dev-options I can't change the setting (oem unlock). Now when its connected with PC (fastboot Mode), and I try everytime to flash Data there is this error: "FAILED (remote: Command not allowed)"
So...I format all data with TWRP (no OS anymore). Now I know there is no custom ROM for this device out. I was totally fckd up.
I download the update.zip (Stock Rom update) from another Thread and unpack boot.img, recovery.img and system.img from update.app (cause I don't know how to flash it otherwise).
I tried to flash every 3 img. data with TWRP - only the boot.img and recovery.img was installed. Now my device is Bricked because of Im stupid.
So I can only try to flash data with holding vol+ and vol- and power. I also tried eRecovery, but everytime, I tells me that there was a problem by downloading the package.
The fastboot mode is useless, cause there is this bug (read above).
Can you tell me, is there a method to flash update.zip, or another way, or is this device totally broken?
Thanks!!:crying:
Which firmware you had before brick?
MobileTechArena said:
Which firmware you had before brick?
Click to expand...
Click to collapse
I think it was the EMUI 5.0.1 Version (newest) with Android 7.0
70X1C said:
I think it was the EMUI 5.0.1 Version (newest) with Android 7.0
Click to expand...
Click to collapse
PRA-LX1?
MobileTechArena said:
PRA-LX1?
Click to expand...
Click to collapse
Exacly
70X1C said:
Exacly
Click to expand...
Click to collapse
Download here rescue system file, restore that in TWRP. Then flash stock.boot.img via fastboot flash boot boot.stock.img command , then you can update to B110 OTA.
---------- Post added at 04:18 PM ---------- Previous post was at 04:15 PM ----------
To make TWRP to find rescue files, first backup recovery or something in TWRP, then TWRP will make new folder with backup files that you can raplace with files from rescue system.
MobileTechArena said:
Download here rescue system file, restore that in TWRP. Then flash stock.boot.img via fastboot flash boot boot.stock.img command , then you can update to B110 OTA.
---------- Post added at 04:18 PM ---------- Previous post was at 04:15 PM ----------
To make TWRP to find rescue files, first backup recovery or something in TWRP, then TWRP will make new folder with backup files that you can raplace with files from rescue system.
Click to expand...
Click to collapse
The problem is, that I flash the stock recovery on the device (I have no TWRP anymore)
And there is this problem with fastboot..(read above)
70X1C said:
The problem is, that I flash the stock recovery on the device (I have no TWRP anymore)
And there is this problem with fastboot..(read above)
Click to expand...
Click to collapse
Then try to put UPDATE.APP into dload and do Force update.
70X1C said:
The problem is, that I flash the stock recovery on the device (I have no TWRP anymore)
And there is this problem with fastboot..(read above)
Click to expand...
Click to collapse
Is you FRP locked? Try to unlock bootloader again, fastboot oem unlock "your unlock code". Then try to flash TWRP again. Don't bother with Dload and forced update as that doesn't work.
MobileTechArena said:
Is you FRP locked? Try to unlock bootloader again, fastboot oem unlock "your unlock code". Then try to flash TWRP again. Don't bother with Dload and forced update as that doesn't work.
Click to expand...
Click to collapse
I have no idea of the cause, but dload never worked for me too.
This only works if you can boot to Android and Developer Options menu opens for you (if they don't you'll end up with bricked device).
Boot into the Fastboot mode and relock your device (Command: "fastboot oem relock (unlock code)" ).
Then you'll be able to unlock the OEM Lock from the Developer Options menu. (And after it you can go back to Fastboot and unlock the bootloader again to reinstall the TWRP).
You still need help?
MobileTechArena said:
Download here rescue system file, restore that in TWRP. Then flash stock.boot.img via fastboot flash boot boot.stock.img command , then you can update to B110 OTA.
---------- Post added at 04:18 PM ---------- Previous post was at 04:15 PM ----------
To make TWRP to find rescue files, first backup recovery or something in TWRP, then TWRP will make new folder with backup files that you can raplace with files from rescue system.
Click to expand...
Click to collapse
Where exactly is the rescue system file? I can't seem to find it
theholycutu said:
Where exactly is the rescue system file? I can't seem to find it
Click to expand...
Click to collapse
Looks like they removed it from that site. If i find it somewhere i will share it.
.
MobileTechArena said:
Looks like they removed it from that site. If i find it somewhere i will share it.
.
Click to expand...
Click to collapse
Thanks a lot
theholycutu said:
Where exactly is the rescue system file? I can't seem to find it
Click to expand...
Click to collapse
https://mega.nz/#!k0MzQL5T!yHj-2n9DuGvb-ZdsemOgw4k3vQTMy7CJXIGFAhJlplo
Sorry I have seen the thread just before.
Please let me know when you downloaded it. I'll take it out again.
ChinHon said:
https://mega.nz/#!k0MzQL5T!yHj-2n9DuGvb-ZdsemOgw4k3vQTMy7CJXIGFAhJlplo
Sorry I have seen the thread just before.
Please let me know when you downloaded it. I'll take it out again.
Click to expand...
Click to collapse
I downloaded it thanks a lot
:good:
please help me. i also have a bricked p8 lite 2017. but i can boot into. TWRP,fastboot,system upgrade
---------- Post added at 10:15 PM ---------- Previous post was at 10:08 PM ----------
man i also have a bricked p8 lite 2017, did you solve your problem? help me please
EXE bahotin said:
please help me. i also have a bricked p8 lite 2017. but i can boot into. TWRP,fastboot,system upgrade
---------- Post added at 10:15 PM ---------- Previous post was at 10:08 PM ----------
man i also have a bricked p8 lite 2017, did you solve your problem? help me please
Click to expand...
Click to collapse
I get ERROR: 255 and I have tried a lot of options and still haven't got to any solutions.. still attempting to solve it, too
I have unlocked bootloader and TWRP recovery downloaded.
I can't root with any app.
Except maybe One Click root
(It takes 3h)
But I don't trust this app.
How I can root and flash my TWRP in my NEM-L21 with Android 7.0?
AND FOR FREE AND WITH FAST METHOD.
CIMT666LOL said:
I have unlocked bootloader and TWRP recovery downloaded.
I can't root with any app.
Except maybe One Click root
(It takes 3h)
But I don't trust this app.
How I can root and flash my TWRP in my NEM-L21 with Android 7.0?
AND FOR FREE AND WITH FAST METHOD.
Click to expand...
Click to collapse
are you able to boot into TWRP?
Have you flashed the TWRP for Nougat or MM?
use SuperSU v 2.78 and it should work.
I have Huawei's official EMUI 5.0 with Android Nougat.
And how I can root with SuperSU zip file without PC?
And where I find the zip file.
CIMT666LOL said:
I have Huawei's official EMUI 5.0 with Android Nougat.
And how I can root with SuperSU zip file without PC?
And where I find the zip file.
Click to expand...
Click to collapse
https://download.chainfire.eu/1001/S…perSU-v2.78-20
Make sure you have TWRP installed for Nougat.
I am not installed TWRP recovery only downloaded.
I downloaded that SuperSU zip file.
What I need to do now?
I can't install package via download mode
CIMT666LOL said:
I am not installed TWRP recovery only downloaded.
I downloaded that SuperSU zip file.
What I need to do now?
I can't install package via download mode
Click to expand...
Click to collapse
You can't. You need pc for it. Flash twrp and then flash zip
shashank1320 said:
You can't. You need pc for it. Flash twrp and then flash zip
Click to expand...
Click to collapse
Okay. But can I just root without any other things.
CIMT666LOL said:
Okay. But can I just root without any other things.
Click to expand...
Click to collapse
Yes. Flash twrp n then zip for root.
So I can't install this without twrp
CIMT666LOL said:
So I can't install this without twrp
Click to expand...
Click to collapse
You can't. Not liking one click tool?
And this app works?
http://adgilapps2011.store.aptoide.com/app/market/bitbot.root.click.one.el/3/21804722/One-Click+Root
And how I flash TWRP?
With ADB and Fastboot or ...?
CIMT666LOL said:
And this app works?
http://adgilapps2011.store.aptoide.com/app/market/bitbot.root.click.one.el/3/21804722/One-Click+Root
And how I flash TWRP?
With ADB and Fastboot or ...?
Click to expand...
Click to collapse
Haven't used this app so cant comment.
You can flash twrp via fastboot.
Commands-
Adb boot bootloader
Fastboot flash recovery <recovery_name.img>
Fastboot reboot
Adb reboot recovery
And you are in twrp.
---------- Post added at 06:36 PM ---------- Previous post was at 06:27 PM ----------
CIMT666LOL said:
And this app works?
http://adgilapps2011.store.aptoide.com/app/market/bitbot.root.click.one.el/3/21804722/One-Click+Root
And how I flash TWRP?
With ADB and Fastboot or ...?
Click to expand...
Click to collapse
Dont use the tool. Got some reviews that its not good amd install some apps which may not be good.
shashank1320 said:
Haven't used this app so cant comment.
You can flash twrp via fastboot.
Commands-
Adb boot bootloader
Fastboot flash recovery <recovery_name.img>
Fastboot reboot
Adb reboot recovery
And you are in twrp.
---------- Post added at 06:36 PM ---------- Previous post was at 06:27 PM ----------
Dont use the tool. Got some reviews that its not good amd install some apps which may not be good.
Click to expand...
Click to collapse
Okay.
I flash TWRP with ADB if I can. :laugh: