Database Develop

[Q] [HELP] Galaxy note bricked

I was updating my galaxy note to ICS with ODIN3. And on the final, just stopped on HIDDEN.img and keep this way till my battery runs out. Now the phone only power on with download mode, and I cannot flash any rom with ODIN, I tried to flash the ICS from the chinese link, from the sammobile.com, and I also tried others stock roms. Or the same thing happens or just fail or finish without flashing the rom =/

if you can get into download mode you can flash a stock rom using odin

try flashing a stock kernal...or unsecure one..
Sent from my GT-I9220 using XDA App

by the way dnt panic ur fone is not bricked..try remove battery n flash the cf kernel for the ics leak i9220..
Sent from my GT-I9220 using XDA App

Moved To Q&A​
Please post all questions in the Q&A section​

saif123a said:
by the way dnt panic ur fone is not bricked..try remove battery n flash the cf kernel for the ics leak i9220..
Sent from my GT-I9220 using XDA App
Click to expand...
Click to collapse
In proper terms:
DONT PANIC. You're not bricked, just borked.
Pull the battery and leave it out for 5 minutes.
Put the battery in and plug the phone into a WALL CHARGER.
Allow it to charge for 2 hours MINIMUM. VERY VERY IMPORTANT. Especially if you let the battery die previously.
Put battery in and go into download mode.
Connect Odin to the phone. One you have the yellow box letting you know it's connected flash a STOCK ROM from here.
Profit.

Well, I'm not at home now. But I already tried to flash a stock rom, and nothing happens, it finishes with 0 instals and 0 errors or just stop on HIDDEN.img. And I use a universal battery charger on my battery

conanjf said:
Well, I'm not at home now. But I already tried to flash a stock rom, and nothing happens, it finishes with 0 instals and 0 errors or just stop on HIDDEN.img. And I use a universal battery charger on my battery
Click to expand...
Click to collapse
Then you are doing something wrong...
Swyped from a white note.

If it gets stuck at hidden then most probably you are using the wrong pit file as there are 2.. 1 for the 32gb and 1 for the 16gb..
Sent from my GT-N7000 using xda premium

nuclearmonkeyuk said:
If it gets stuck at hidden then most probably you are using the wrong pit file as there are 2.. 1 for the 32gb and 1 for the 16gb..
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Well, I didn't think about that !!!
On the ICS I downloaded, there was the pit for 32gb, but mine is 16. But I dont remember if I flash the pit. I'll try to flash the 16gb pit again !!!

I'm at almost same position. I have the same screen problem, phone not turning on after Samsung logo.
I'm trying to go into download mode, it says low battery. So, I try to charge it, but it's not charging at all. Tried a battery charger, didn't work as well.

emre1903 said:
I'm at almost same position. I have the same screen problem, phone not turning on after Samsung logo.
I'm trying to go into download mode, it says low battery. So, I try to charge it, but it's not charging at all. Tried a battery charger, didn't work as well.
Click to expand...
Click to collapse
Well, I used a universal battery charge to charge my battery.
I flash the pit 16gb alone, and then I tried do flash the rom and it just get stuck on setupconnection!!!

Well I fixed it.
I removed the sd card and the chip. Downloaded odin3 v.1.83 on 4shared (really easy to find it) because I read this on sammobile.com:
For those user that stuck at hidden.img,kindly proceed with Odin 1.83..100% guaranteed because i’ve try it and it works perfectly..thanks sammobile..
greghart_mirrus
and it work !!! *_*

I installed the ICS, but is full of bugs... So I installed the stock rom again (2.3.6) and its full of errors too =/

did you do a full wipe and cache clearing ?

btyork said:
In proper terms:
DONT PANIC. You're not bricked, just borked.
Pull the battery and leave it out for 5 minutes.
Put the battery in and plug the phone into a WALL CHARGER.
Allow it to charge for 2 hours MINIMUM. VERY VERY IMPORTANT. Especially if you let the battery die previously.
Put battery in and go into download mode.
Connect Odin to the phone. One you have the yellow box letting you know it's connected flash a STOCK ROM from here.
Profit.
Click to expand...
Click to collapse
Hi,
I also encountered this same issue (stuck at hidden.img).
and i also tried to restore the stock rom via odin but it's still stuck at hidden.img
i can only flash the custom rom via CWM but internal SD card is not readable. Do you have any idea to fix this issue, please? thanks for yr help.
Rattna/Zudy

Did u try to flash the rom with odin3 v1.83??? I did this and didnt stuck on the hidden.img. I flashed this rom http://www.mirorii.com/fichier/3/501208/I9220LP1-N7000-ICS-REPACK-tar.html

I am still stuck at same point. Trying to charge the battery with battery charger, and put it back, the phone says low battery can't get in download mode. I plug it into to wall charger it doesn't seem it's charging at all. I don't know what I'm supposed to do ? Should I buy new battery

Hi! I noticed you guys were having problems with ICS. CLICK HERE to check out my guide to get ICS working easily. You can flash the chainfire repack with the attached 16gb pit file (unzip it first) to get ICS. But I suggest you start with step 1 from the guide to get a stable baseband for your ICS.
PS. I have also attached ODIN v1.85.

emre1903 said:
I am still stuck at same point. Trying to charge the battery with battery charger, and put it back, the phone says low battery can't get in download mode. I plug it into to wall charger it doesn't seem it's charging at all. I don't know what I'm supposed to do ? Should I buy new battery
Click to expand...
Click to collapse
U'd use someone like this one >> http://www.1001sites.co.uk/BCH_UNI.JPG
to charger the battery.

[Q] Is there anyway to flash stock rom via cwm

Im on ics rom right now and im stuck on it. My computer wont recognize my phone, i tried installing drivers and many other things but it just wont work... Can someone tell me what to do??? (i tried connecting to other computers but it doesnt work) If not can someone suggest custom rom that doesnt drain 1% of battery in 2 minutes.

xXcRazycRackeRXx said:
Im on ics rom right now and im stuck on it. My computer wont recognize my phone, i tried installing drivers and many other things but it just wont work... Can someone tell me what to do??? (i tried connecting to other computers but it doesnt work) If not can someone suggest custom rom that doesnt drain 1% of battery in 2 minutes.
Click to expand...
Click to collapse
Did you try a other computer? Sometimes the computer fails to identify you device, happend to me 1 time.
Or try Blazr rom, fast stable and very long battery life!
Just put the zip file on your sdcard and copy it to your phone (since your computer doesnt let you connect via usb)
Then go into recovery mode en update via zip file.
See this link for the rom: http://forum.xda-developers.com/showthread.php?t=1628639
Everything you need is posted there.
Greetings

CybertekDj said:
Did you try a other computer? Sometimes the computer fails to identify you device, happend to me 1 time.
Or try Blazr rom, fast stable and very long battery life!
Just put the zip file on your sdcard and copy it to your phone (since your computer doesnt let you connect via usb)
Then go into recovery mode en update via zip file.
See this link for the rom: http://forum.xda-developers.com/showthread.php?t=1628639
Everything you need is posted there.
Greetings
Click to expand...
Click to collapse
I tried it on friends computer.
And i need i9000 roms.

xXcRazycRackeRXx said:
I tried it on friends computer.
And i need i9000 roms.
Click to expand...
Click to collapse
Odin or Heimdall is the only way, but try flashing another ics Rom to see if it fixes the phone not being recognised

slaphead20 said:
Odin or Heimdall is the only way, but try flashing another ics Rom to see if it fixes the phone not being recognised
Click to expand...
Click to collapse
I tried almost every ics rom but it didnt work. I guess i will have to buy new usb cable and check if there is something wrong with the phone.

I had the same problem, I uninstalled the usb drivers and installed them again and it seemed too work fine
Sent from my potato using xda app-developers app

xXcRazycRackeRXx said:
I tried almost every ics rom but it didnt work. I guess i will have to buy new usb cable and check if there is something wrong with the phone.
Click to expand...
Click to collapse
yep, the cable is likely the common cause and problem but not all cables are compatible, best to get original or bring phone and test data mode before buying as charging mode works on all
on the other hand, just examine your usb slot too..a slight misalignment can also cause this problem

xsenman said:
yep, the cable is likely the common cause and problem but not all cables are compatible, best to get original or bring phone and test data mode before buying as charging mode works on all
on the other hand, just examine your usb slot too..a slight misalignment can also cause this problem
Click to expand...
Click to collapse
Will Sgs 2 cable work?

xXcRazycRackeRXx said:
Will Sgs 2 cable work?
Click to expand...
Click to collapse
give it a try, it should

[Q] Help Needed in Unbricking Samsung Galaxy Pop (GT S5570)

Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...

what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick

nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...

yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium

It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....

yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.

tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one

1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin

Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.

dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...

yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung

Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.

chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...

yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center

Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.

yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium

Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....

[Q] Is my GT_i9000 dead?

Hi, I need some advice. I dropped my Galaxy S in a puddle. It was submerged for the just a second, but when I fished it out, the screen had gone 'weird', so I got the battery out as quickly as possible, then dried it out for a few days in the airing cupboard. I then tried it and it started up okay, then when I swiped to unlock the screen, it froze. since then I have been unable to boot the phone. It shows the Galaxy logo, then restarts and continues that loop.
I wondered if maybe the software has just been corrupted during its bath, so I thought i might try flashing a ROM onto it to see if that would recover. I found that I could not enter recovery mode but download mode opened okay. I have tried flashing a few ROMS using Odin. I am completely new to this and have never flashed my phone before, so steep learning curve. I have so far tried - I9000XWJW5 which I believe is normally used before installing Cyanogen mod. I also downloaded the T-Mobile Stock ROM and one with this filename - CF-Root-XX_OXA_JW4-v4.4-CWM3RFS. All of these successfully downloaded to the phone and I could see the progress bar on the phone. Unfortunately I still cannot get the phone into recovery mode.
So, whats your opinion? is my phone screwed? Is there anything else I can try which may help, like formatting or anything like that.
Any help would be very much appreciated.

try search for value pack 2.3.6 and flash it then root it after that I believe you should get the recovery option.

erpurohit said:
try search for value pack 2.3.6 and flash it then root it after that I believe you should get the recovery option.
Click to expand...
Click to collapse
Unfortunately I think that was the file - I9000XWJW5 I had already tried.

did you rooted your phone after flashing

erpurohit said:
did you rooted your phone after flashing
Click to expand...
Click to collapse
Can I do that without being able to get into recovery mode?
I've just been reading that I can use a PIT file to repartition during flashing. Is it worth trying? I noticed in the Value pack TAR file it does not have a PIT file. I got one downloaded from somewhere else called - s1_odin_20100512.pit worth a shot?

I tried including the pit file as well. Odin reported success but phone is still continuous boot loop and I cannot get recovery mode up. Do you think one of those USB things that get you into download mode would help? I'm beginning to think the internal SD is knackered, or something like that.

I think the memory is brocken but i don't realy know. Send it to Samsung for a check
Sent from my GT-I9001 using xda app-developers app

I'll try them, will they still help me after I've tried reinstalling ROM etc?

Yes they will repair it if you pay for
Sent from my GT-I9001 using xda app-developers app

Stuck at bootscreen, no recovery mode, download mode works, Odin3 stops at kernel

Hi to everyone who's reading this.
I have got stuck with an Note GT-N7000 from a friend. It was running the original Samsung firmware and never flashed before. Now the device is stuck at the bootscreen.
If I press the Home+VolUp+Power, it just flashes the bootscreen (see IMG_20131006_212031.jpg) then the screen is black again and shortly after that the boot screen shows again. For comparison if I just press power then this short flash doesn't happen. But the same bootscreen is shown.
I have tried to flash PhilZ-cwm6 recovery, but Odin3 stops at "NAND Write Start" no error line or anything (see Odin3.jpg). After an reboot there was that yellow triangle indicating a modification of the firmware. But no change to the problem.
To provide as much info as possible I also attached a photo of the label below the battery (see IMG_20131006_211932.jpg).
The device is older than 2 years now, so there is now warranty.
The behavior is somehow similar to:
http://forum.xda-developers.com/showthread.php?t=2466339
I'm a little bit afraind i could brick it even while trying to repartition the phone.
http://forum.xda-developers.com/showthread.php?t=1667886
Another thread discribing pit, but i'm not stuck at factoryfs. May this apply to me too?
http://forum.xda-developers.com/showthread.php?p=26285877
Thanks in advance for any help.
Regards Marco

Stuck at flashing kernel? Hmmm. Try a different USB cable, front port, kill all kies processes is any, try a different PC.

Friendly word of advice, blank out your imei from the second image.
Sent from my C6833 using XDA Premium 4 mobile app

nokiamodeln91 said:
Stuck at flashing kernel? Hmmm. Try a different USB cable, front port, kill all kies processes is any, try a different PC.
Click to expand...
Click to collapse
Ok, I tried the same procedure on my notebook using the cable from my Wonder with the same result. As I'm using the drivers that came with Windows Update, I have no kies installed anyways. I Tried to install the drivers from this thread http://forum.xda-developers.com/showthread.php?t=1424997. But I think my system isn't using them.
Could that Microsoft provided drivers be the problem?
As the battery only has 3.1 volts with no change over several hours of charging and the phone doesn't enter the download mode anymore with a battery low error. I'll first try to replace it with a new one. Maybe that's that cause after all. I just hope the charging circuits aren't broken.
SpyderTracks said:
Friendly word of advice, blank out your imei from the second image.
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks, for that advice! Didn't know that the IMEI can be used to blacklist stolen devices (Wikipedia). Someone might do a prank with it.

para756 said:
Ok, I tried the same procedure on my notebook using the cable from my Wonder with the same result. As I'm using the drivers that came with Windows Update, I have no kies installed anyways. I Tried to install the drivers from this thread http://forum.xda-developers.com/showthread.php?t=1424997. But I think my system isn't using them.
Could that Microsoft provided drivers be the problem?
As the battery only has 3.1 volts with no change over several hours of charging and the phone doesn't enter the download mode anymore with a battery low error. I'll first try to replace it with a new one. Maybe that's that cause after all. I just hope the charging circuits aren't broken.
Thanks, for that advice! Didn't know that the IMEI can be used to blacklist stolen devices (Wikipedia). Someone might do a prank with it.
Click to expand...
Click to collapse
Don't think the ms drivers work at all for proper connection.
Sent from my C6833 using XDA Premium 4 mobile app

SpyderTracks said:
Don't think the ms drivers work at all for proper connection.
Sent from my C6833 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, i got the new battery and I've got the windows drivers working. But still with the same result. Any other ideas?
Should i try a different Flash file?
I allready downloaded the an original firmware but i'm afraid to do even more damage, if I don't wipe data and cache. So I wanted to flash the recovery first.
Are there any other steps that i have to do first? Maybe i'm missing something.

Have you installed kies? If not, install that first. It will install all three required drivers. Then go to task manager and kill all process that relates to kies. Then reboot the phone into download mode and flash again. You can also try the firmware you downloaded using original Pit file with repartition.

nokiamodeln91 said:
Have you installed kies? If not, install that first. It will install all three required drivers. Then go to task manager and kill all process that relates to kies. Then reboot the phone into download mode and flash again. You can also try the firmware you downloaded using original Pit file with repartition.
Click to expand...
Click to collapse
I had no keys installed, but I did now. Unfortunately I think the drivers in mentioned before seam to be the same.
Meanwhile I also tried to flash the original firmware and a Gingerbread Firmware form that brick safe install thread. In comparison to the CWM there is no progress on the green bar, just 2 pixel. I thought that I might have not waited long enough, but for that CWM flash the bar was completed for at least 10 minutes.
As I Installed Kies now I saw that option that allows a firmware update through kies. But it doesn't seam to initialize the update, quite similar to the behavior Odin shows.
I don't' like messing around without a way to identify that I have the right set of drivers installed. I tried to find some information about the drivers through the forum search and Google, but so far with no result.
I attached the drivers I use. If you (or someone else) did this before and got a working configuration, would you be so kind and make some screenshots of the drivers you use?
The same game with the the USB-Cable, has someone a correct wiremap, that I could check? (obviously not easy for the mini-USB connector)
By PIT-File you mean the "Pit file for 16GB model" from this thread? http://forum.xda-developers.com/showthread.php?t=1424997 or just the checkbox Re-Partition? That's really the last thing I want to try now, because I know to less about internal structure of the device. If Re-Partition fails and the downloader (Power+VolDown+Home) is on that partition I might kill the last point I can modify this Note ATM.
Just something more i want to add: Odin doesn't show that blue progress bar. I never used Odin before, but i searched for the process on YouTube and i just guess that Odon mode on the Galaxy Note it should show that bar too.
Meanwhile I also tried to flash a Krenel zImage with heimdall (The Kernel zImage is linked from the recovery CM tells to use in the installation process with heimdall). As Heimdall brings it's own drivers and behaves similar, I would guess, that the drivers at not the problem anyways.

How did you flash the gb rom? You need to try a rom flash using odin. Yes I mean the 16 gb pit if you have the 16 gb note.
Do you have access to Cwm recovery?
---------- Post added at 02:55 AM ---------- Previous post was at 02:52 AM ----------
Odin 3+ has a blue progress bar and old odin has green. When flashing firmware the download mode on phone also shows a green progress bar which is the indication of write.
When you connect the phone in download mode does your phone screen say "downloading"?

nokiamodeln91 said:
How did you flash the gb rom? You need to try a rom flash using odin. Yes I mean the 16 gb pit if you have the 16 gb note.
Do you have access to Cwm recovery?
Click to expand...
Click to collapse
To flash GB I followed this thread http://forum.xda-developers.com/showthread.php?t=1763151 to step 10.
The Phone was stock before it broke. I just hope i didn't confuse you. I tried several aproaches now.
All the roms i tried so far have been single file roms.
The 1st thing i did was trying to flash PhilZ-cwm6 recovery.
Then I replaced the battery, because odin download mode stated the battery is beeing low.
I repated the process with different versions of the drivers provided in this forum and by kies.
After that i tried different Firmware versions.
And finally i tried heimdall because it seams to be a good alternative to Odin.

Yes I am a bit confused. May be not because of your steps but too much to read..
Is recovery mode accessible? As your last post say Cwm recovery flash.
When the phone is in download mode, what's displayed on the screen?

nokiamodeln91 said:
Yes I am a bit confused. May be not because of your steps but too much to read..
Is recovery mode accessible? As your last post say Cwm recovery flash.
When the phone is in download mode, what's displayed on the screen?
Click to expand...
Click to collapse
OK i'll try it short
Recovery never was accessible. Download mode ist shown by the screenshot in the 1st post. Only the counter went up to 9.

There is no download mode screenshot in the first post. Could you post again.

nokiamodeln91 said:
There is no download mode screenshot in the first post. Could you post again.
Click to expand...
Click to collapse
I'm verry sorry, that was my fault. I added it to the 1st post. It's getting late for me.

Yeah. Just saw it. All looks fine. I cannot find a reason why odin is not flashing even the kernel. If bricked, it's usually in the system partition, then also kernel should be flashed successfully.
Tried changing the use cable?

nokiamodeln91 said:
Yeah. Just saw it. All looks fine. I cannot find a reason why odin is not flashing even the kernel. If bricked, it's usually in the system partition, then also kernel should be flashed successfully.
Tried changing the use cable?
Click to expand...
Click to collapse
Yeah, tried 2 cabels and 2 PCs so far...
I will report the result's here when I tried the repartitioning. So have a good day/night and thanks for your time.

I'm sorry if this was already covered. If you flash JUST philz with Odin, can you get into recovery?
Sent from my GT-N7000 using Tapatalk 2

AndroidSlave said:
I'm sorry if this was already covered. If you flash JUST philz with Odin, can you get into recovery?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Yep, that was the 1st thing I was trying. But I cant flash philz or anything else. Thats all the problem.
I'm thankfull for anyone who gives it a try.

para756 said:
Yep, that was the 1st thing I was trying. But I cant flash philz or anything else. Thats all the problem.
I'm thankfull for anyone who gives it a try.
Click to expand...
Click to collapse
Just throwing ideas out and sorry if you're already doing it...
I always run Odin as administrator.
I would personally start from scratch regarding drivers, delete kies and Samsung drivers, then go into device manager and check there aren't any remaining ms drivers. Reboot and reinstall kies, then shut down kies processes.
I always put the Odin folder on root of c.
The symptoms point to driver issues I think, that's where you usually see this kind of behaviour.
Sent from my C6833 using XDA Premium 4 mobile app

OK, I SuperBricked (no ODIN) it now. For others with the same symptomes, don't use Re-Partition. As I won't try it with JTAG maybe the device goes to eBay. Thanks to everyone and don't worry, it would have been broken anyways.
Maybe if someone is in the same situatuon: Try harder on different cable/drivers/os before using a Pit file.