Related
Hallo,
this is my first post on this forum...so hallo everyone.
I have xperia x1 that do not power up.Battery is fully charged but when i try to turn on the phone it just vibrate side leds blinks and than again it vibraete and so on....but it never show enything on the screen.
The power on and volume down button does nothing...
Please help to reflash it...?!
goran124 said:
Hallo,
this is my first post on this forum...so hallo everyone.
I have xperia x1 that do not power up.Battery is fully charged but when i try to turn on the phone it just vibrate side leds blinks and than again it vibraete and so on....but it never show enything on the screen.
The power on and volume down button does nothing...
Please help to reflash it...?!
Click to expand...
Click to collapse
Maybe it boots but the screen only does not work
May I know what is happening before ur phone like that?
My suggestion:
1. Check if the flexible okay, to test it, try to enter tri color screen by pressing down button + power then connect it to PC find wether the phone is detected or not
2. If your phone is detected, try to flash it with any "Working" ROM, a stock ROM is recommended. Then see how come? If the screen still blank wait for a moment and then try to call the X1 number using other phone.
3. If your phone is not detected, I'm afraid your phone is bricked.
Hello, sorry if this question had been posted before. I just confusing with my Xperia Z1. It's just blank screen, no Sony logo, no boot animation, etc.
I've tried to hold power+vol up but nothing happen. When i put the charge on and i press the power+vol up, it vibrate three times and nothing happen.
What should i do with this?? I hope it's not hardware failure.
Thx for the answer and suggestion.
did you flash anything prior to it going like that?
Sent from my C6903 using Tapatalk
7supreme said:
Hello, sorry if this question had been posted before. I just confusing with my Xperia Z1. It's just blank screen, no Sony logo, no boot animation, etc.
I've tried to hold power+vol up but nothing happen. When i put the charge on and i press the power+vol up, it vibrate three times and nothing happen.
What should i do with this?? I hope it's not hardware failure.
Thx for the answer and suggestion.
Click to expand...
Click to collapse
When you hear the three times vibration then you shutting down your phone and after that the phone is turned off completely, then leave it under wall charger via USB or Dock for minimum 4 hours, if it do not turn on then you have to flash a new Firmware OR Repair via PC Companion. Download Official Sony PC Companion and repair your phone. Other way is to use Flashtool and download the latest FTF from Mega Collection and flash it. Then it should turn on.
hi
i have the same problem with my z1 xperia
the pc companion wont see my phone to preform any kind of repair
any ideas
thanks
if nothing is happening just the LED red blinks even when you put the device in the charge, its hard bricked and will be fixed just with opening the phone and relive it with test point ...
maybe this thread will help you:
http://forum.xda-developers.com/showthread.php?t=2646405
7supreme said:
Hello, sorry if this question had been posted before. I just confusing with my Xperia Z1. It's just blank screen, no Sony logo, no boot animation, etc.
I've tried to hold power+vol up but nothing happen. When i put the charge on and i press the power+vol up, it vibrate three times and nothing happen.
What should i do with this?? I hope it's not hardware failure.
Thx for the answer and suggestion.
Click to expand...
Click to collapse
If it's brick, no prob, let's begin
Requirements:
The latest Flash Tools version, the latest FTF file of your phone, or any FTF file you want
Plug your phone to AC charger for about one or two minutes, and if you see red LED, now your phone is OK
1) If your phone has more than 50 percent charges, you can unplug it
2) If it has less 50 percent, let it charge for about an hour or more till it reaches 70 percent
So, no matter the first way or second, after you unplug it, now you can now connect your phone via USB and flash it
If you do everything correctly and if nothing goes wrong, after flashing, you can use your phone without any problem
If you couldn't do it, inform me to help you more
Look at the micro sd slot. Is there a red stripe? Or white?
If red, it's a water damage
Sent from my C6903 using XDA Free mobile app
I had also a blinking light.. it was a broken accu.
l92 said:
Look at the micro sd slot. Is there a red stripe? Or white?
If red, it's a water damage
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
It happened exactly the same with mine. I was on stock rom, and went to the swimming pool with it. But the stripe is white.
I cannot turn it on and only get the red light blinking when is plugged into the charger...
Help...
Miguel Pereira said:
It happened exactly the same with mine. I was on stock rom, and went to the swimming pool with it. But the stripe is white.
I cannot turn it on and only get the red light blinking when is plugged into the charger...
Help...
Click to expand...
Click to collapse
Try the hard brick fix (if you have warranty send to Sony instead). I doubt it'll do anything because it seems by your decription the hardware is damaged physically, but its worth a shot.
kentexcitebot said:
Try the hard brick fix (if you have warranty send to Sony instead). I doubt it'll do anything because it seems by your decription the hardware is damaged physically, but its worth a shot.
Click to expand...
Click to collapse
I already sent it to the warranty. Now we play the waiting game...
zony xperia z1 bricked
I have the same problem !! PLS HELP !! THE PHONE IS DEAD !! My pc don`t recognize the phone !! no led... the phone not charging! what to do?? help please my z1 bricked today while updating Monster'$ Rom my Phone is entirely lifeless ... no LED light, NOTHING
When connect to PC... nothing at all happens, doesn't even pick up the phone!
Have tried VOL + and power
VOL - + power
VOL - and power
Still NOTHING... phone is DEAD
Please help me friends
Please Help any Dev!!
Please i need help, i hard bricked my z1 c6903 ,restoring a backup with unlocked bootloader , this time the pone is totally dead. When in plugg in it blinks a red light.Im reading all about this and im a bit confused ,can anyone help me please?I really appreciate if u can.Best regards
SANTUMIL said:
Please i need help, i hard bricked my z1 c6903 ,restoring a backup with unlocked bootloader , this time the pone is totally dead. When in plugg in it blinks a red light.Im reading all about this and im a bit confused ,can anyone help me please?I really appreciate if u can.Best regards
Click to expand...
Click to collapse
srichinu said:
I have the same problem !! PLS HELP !! THE PHONE IS DEAD !! My pc don`t recognize the phone !! no led... the phone not charging! what to do?? help please my z1 bricked today while updating Monster'$ Rom my Phone is entirely lifeless ... no LED light, NOTHING
When connect to PC... nothing at all happens, doesn't even pick up the phone!
Have tried VOL + and power
VOL - + power
VOL - and power
Still NOTHING... phone is DEAD
Please help me friends
Click to expand...
Click to collapse
7supreme said:
Hello, sorry if this question had been posted before. I just confusing with my Xperia Z1. It's just blank screen, no Sony logo, no boot animation, etc.
I've tried to hold power+vol up but nothing happen. When i put the charge on and i press the power+vol up, it vibrate three times and nothing happen.
What should i do with this?? I hope it's not hardware failure.
Thx for the answer and suggestion.
Click to expand...
Click to collapse
ali_assaf said:
hi
i have the same problem with my z1 xperia
the pc companion wont see my phone to preform any kind of repair
any ideas
thanks
Click to expand...
Click to collapse
NiM72NiK said:
if nothing is happening just the LED red blinks even when you put the device in the charge, its hard bricked and will be fixed just with opening the phone and relive it with test point ...
maybe this thread will help you:
http://forum.xda-developers.com/showthread.php?t=2646405
Click to expand...
Click to collapse
Drain your battery completely
By Pressing and holding volume up and power button for 15 second, no vibration dont worry just hold it for 15 seconds and forget your phone for 1-2 days
Get working charger and usb cable check it then connect charger to phone there should be red light
Leave your phone for 3-4 hours
Now disconnect your phone from charger
Again check usb cable and drivers in pc
Open flashtool and get stock ftf ready for flashing
Once the dialog box appears with phone's animation
press and hold just volume down button and connect your phone with pc and immediately Release volume down button as soon as dialogue box disappears
Then disconnect phone when instructed in flashtool and wait for 4-5 minutes
Now try to turn on the phone.
Main thing is to have patience
This should work as i have my phone in same hardbricked state twice and this brought life in my phone back..!
This fixed mine
https://www.youtube.com/watch?v=GelRGJrL08s
sony z1 red light blinking problem
i have sony z1 with red light blinking problem while charging or powering on i tried flashtool with ftf and pc companion my pc not recognice it please help me
I've had exactly the same problem, nothing but the blinking red light. I replaced the battery (around $6 on aliexpress) and the phone worked again!
Berenpak02 said:
I've had exactly the same problem, nothing but the blinking red light. I replaced the battery (around $6 on aliexpress) and the phone worked again!
Click to expand...
Click to collapse
I hope, your solution works for me too. I ordered a battery and waiting for delivering it. If it won't work, I'll write here to help someone like us who wants to order a new battery.
Edit:
After battery changing, the phone worked. I don't know why, but it had been locked and rebooted repeatedly. Then I resetted to the factory settings. After that, it has been started to run well.
Hello everybody!
I'm new in this forum, I'm also new in Android "tuning", so I don't actually know, what to do in this situation. Ok, I've read other topics about this, but every other seems lighter than my problem.
Firstofall, I wanted to apologize for my english, but I hope, you could understand me. :fingers-crossed:
So, there is an Xperia T LT30p which has been owned by my girlfriend. She donated it to her mother and so on, so long story short, one day there appeared a key and exclamation mark in a yellow triangle (if I understood it right, I really don't know) and after that it was dead. I plugged it in wall charger - nothing, no vibration, no led, nothing, then waited for some time, nothing changed. Ok, removed the back cover, tested voltage on battery - 3,83V, not so dead, I guess... Then I started to read topics in here, sounds like a hard brick, but how to solve it..? I tried to power it up, nothing (as you expected), also tried every possible key combination (power + vol up, power + vol down, vol up/vol down + USB cable) - nothing at all, no vibration, no leds, nothing on the screen. Yesterday I downloaded PC companion, downloaded Flashtool, tried to connect it to PC, of course no drivers, but got the QHSUSB_DLOAD, so I guess, it's not that dead.
Oh yes, the only way how this phone is responding somehow is when I plug in the USB cable/wall charger with removed battery, then it does one red blink and that's all, nothing else. And that doesn't matter if there is any button pressed.
The main question is - what can I try to do in this situation? Is it fully dead?
I really hope for your answers and suggestions, otherwise, I don't really know what to do with that electronic mess on the table... :fingers-crossed:
Remove the battery and press and hold power and volume up buttons simultaneously. Then plug your phone to computer.
You'll be able to flash a kernel with Fastboot mode in Flashtool that way.
If you have the kernel the phone should boot past sony logo. You may then install whatever ftf you like via Flashtool.
Btw, I have read somewhere that the computer recognizing the phone as qhusb_dload is the result of a broken motherboard. Would make most sense anyway, as the phone was not rooted or anything.
I suggest trying above steps anyway.
Good luck!
The phone is not rooted or something, just a stock Xperia...
Just tried as you said, with removed battery pressed power + vol up simultaneously + USB - nothing, I got one red blink and nothing more, computer makes that ''no driver'' sound and that's all, flashtool doesn't find my device...
No wonder about defective motherboard, but the phone is bought in the summer 13', not so old for a phone... And what could had happened with this phone in just everyday use..?
Maybe overhearing or just bad luck with the motherboard.. Sometimes there is no explanation. :/
Is your phone still under warranty ?
Well, technically yes, but warranty card is hiding somewhere, and the phone is bought in an e-shop, i'm not sure if this shop won't send me a few doors further with my phone and I don't even know if this shop still exists..
Andrams said:
Well, technically yes, but warranty card is hiding somewhere, and the phone is bought in an e-shop, i'm not sure if this shop won't send me a few doors further with my phone and I don't even know if this shop still exists..
Click to expand...
Click to collapse
Hi, solved your problem with this method.?
xmontix said:
Hi, solved your problem with this method.?
Click to expand...
Click to collapse
Hi.
Not yet and I think I won't. I got an information about that sad day when this happened. Sony was upgrading an Android version but this process was interrupted somehow, so, I guess, it's quite dead...
HELP! My Xperia SP is dead after unlocking bootloader with official way!
It won't turn on even when I tried to boot it up by connecting via usb to laptop.
I tried to charge it, but it's useless
I also tried to force restart it from restart button but it doesn't wake up
HELPP! :crying:
#UPDATE: By some miracle, the phone boots itself up and get working again. All apps are gone (like factory reset). It shut down about 2 hours then suddenly it came back to life. Still don't get it why this can be happening though. But thank God!
reynaldi3 said:
HELP! My Xperia SP is dead after unlocking bootloader with official way!
It won't turn on even when I tried to boot it up by connecting via usb to laptop.
I tried to charge it, but it's useless
I also tried to force restart it from restart button but it doesn't wake up
HELPP! :crying:
Click to expand...
Click to collapse
Have you tried the OFF button on the back?
You should try to connect your phone to pc, press volume button and keep it pressed. Then without releasing the volume button, press the restart button on the back until you see the led (blue or green depending on the volume you pressed). This means you have at the same time : usb + volume + reset button on the back.
You should keep it pressed during 3 to 15 seconds. If this doesn't work, put your phone to charge (on wall charger and preferably with stock charger) during 1-2 hours and try again.
Try reflash a stock ftf
Please provide more information to the things you did. Did you use EMMA or FLASHTOOL?
TLDGames said:
Have you tried the OFF button on the back?
Click to expand...
Click to collapse
Yes, I tried but it still doesn't work, the phone heats up while there is no sign of life. But after 2 hours it turns back on! Weird
pec0ra said:
You should try to connect your phone to pc, press volume button and keep it pressed. Then without releasing the volume button, press the restart button on the back until you see the led (blue or green depending on the volume you pressed). This means you have at the same time : usb + volume + reset button on the back.
You should keep it pressed during 3 to 15 seconds. If this doesn't work, put your phone to charge (on wall charger and preferably with stock charger) during 1-2 hours and try again.
Click to expand...
Click to collapse
I did that multiple times but there was no sign of life. No led pulse, dead screen, but only warm phone. But it came back on after 2 hours
lucasgta95 said:
Try reflash a stock ftf
Click to expand...
Click to collapse
I can't since it won't connect to anything (wall charger, usb, etc). But thank God it has come to life !
Furrydaus said:
Please provide more information to the things you did. Did you use EMMA or FLASHTOOL?
Click to expand...
Click to collapse
I use cmd since flashtool won't recognize my phone even I have install the correct driver. I read all the instructions from Sony web about unlocking bootloader and I suffer this situation. But after 2 hours it turns back on...
reynaldi3 said:
I use cmd since flashtool won't recognize my phone even I have install the correct driver. I read all the instructions from Sony web about unlocking bootloader and I suffer this situation. But after 2 hours it turns back on...
Click to expand...
Click to collapse
You should have followed the unofficiall methods and not sony
reynaldi3 said:
I did that multiple times but there was no sign of life. No led pulse, dead screen, but only warm phone. But it came back on after 2 hours
Click to expand...
Click to collapse
I have the same problem now and you made my hopes up. I was on PAC rom, normally working, but when i picked up my phone, it wasn't responding, OFF button isn't doing anything and my PC even doesn't recognize the phone over USB. So i hope it will be working again later. :fingers-crossed:
Edit: 12 hours later and still no signs of life, so im' doiwnloading ftf and i'm going to try flashing it...
Make sure you have the driver installed for your phone.
1. Download, install and run the driver update utility. Here's the link where you can download it.
http://www.driverscape.com/download/xperia-sp
2. If it doesn't detect your phone, download flashtool from here:
http://www.flashtool.net/downloads.php
Make sure you have the latest ftf image in order to flash to your phone. You can download from here.
http://forum.xda-developers.com/showthread.php?t=2311964
3. Make sure your phone is off by force shut down (clicking the OFF hard key in the back)
4. Open flashtool. Press and hold the volume down key and then connect your phone to the computer by USB.
5. The notification bar will light green indicating that it is connected in flash mode.
You can then follow instructions on how to flash through Google search. If you are able to reach step 5 and don't know how to flash, let me know.
daubh said:
Make sure you have the driver installed for your phone.
1. Download, install and run the driver update utility. Here's the link where you can download it.
http://www.driverscape.com/download/xperia-sp
2. If it doesn't detect your phone, download flashtool from here:
http://www.flashtool.net/downloads.php
Make sure you have the latest ftf image in order to flash to your phone. You can download from here.
http://forum.xda-developers.com/showthread.php?t=2311964
3. Make sure your phone is off by force shut down (clicking the OFF hard key in the back)
4. Open flashtool. Press and hold the volume down key and then connect your phone to the computer by USB.
5. The notification bar will light green indicating that it is connected in flash mode.
You can then follow instructions on how to flash through Google search. If you are able to reach step 5 and don't know how to flash, let me know.
Click to expand...
Click to collapse
Thanks, i know how to flash ftf, but my phone shows no signs of life, when plugged to charger, the LED doesn't light up and i can't go to flash mode aswell. So now it seems that the only thing i can do is to take my phone to repair, as it seems there is some hardware problem...
Dead Xperia SP Also
I have same situation since 21st of December.. I left my Phone on. When I was going to bed. I woke Up and saw this fuzzy blank grey screen, then I pressed the reset button at the back of the phone thinking all will be fine, But since then I've been battling with it. First, No sign of life after plugging, then a day later after I left it connected to my PC, The LED LIGHT turned red, but dead screen. About 15MINS later it goes off, Then comes up again (LED LIGHT) I've tried connecting to PC, it recognises it for about 4seconds and it disconnects automatically, I've tried practically all the method I saw on here.. Rubber band trick,leaving it to charge all night connected to wall charger / PC..All proved abortive, I have been trying to get the MAGIC green LED LIGHT (FLASHMODE) but it never works.. I took it to a repair shop (NOT SONY) He said he only deals with HARDWARE that it wasn't hardware problem, and they then went ahead to flash it.. (I'm out of warranty) STILL NO LUCK.. I'll be glad if anyone can guide me through or come up with a Plausible SOLUTION, 'cause my BREAK has been horrible since my PHONE went M.I.A..... Thank you GUYS
So, finally I'm going to pick up my repaired SP :fingers-crossed:. They thought it was a problem caused by the reset button pushed too hard, but since they've informed me they've changed whole motherboard, the problem must have been somwhere else, maybe they'll tell me where.
(And it seems that despite the fact i've unlocked the bootloader and flashed ROM on it, they will accept it as a warranty repair, because i think they weren't able to get to know that )
My XSP must really hate me. After less than a week since i've picked it up from the repair, it's dead again (everything tried - reset button, leaving it to charge, usb) with no signs of life ... I guess there must be a much bigger problem than just motherboard That means another two weeks with my old slow LG OO. I'm gonna die without it, i've maintained almost a month without it back then, but i had a tablet borrowed for a review. Now it's worse...
Maybe they should give me another XSP instead of trying to repair this one again...
have you considered about the battery?
the battery might be dead for all we know
That may be the problem, but i must also keep in mind that it had its motherboard changed a week ago. Anyway, i took it to the service again, they also said that charger may be causing it, but battery seems more logical to me as there were no problems with charging.
So i have to wait another two long weeks and then i'll know what was it...
My sony xperia z1 is not turning on...it's power button was broken last month so i used fastboot to boot into system.. but suddenly it powered itself off and now i can't power it on using fastboot mode..my pc plays the sound when i connect the phone but sony flashtool doesn't recognize it..when i connect the phone to the pc red led lights up..sometimes while z1 is connected to a charger it turns it self on but after turning on it suddenly dies..please help me to fix this...sorry for bad english
Try pressing vol up +power button if it vibrates thats good means you might be in a soft brick and also if your not rooted or bl is unlockd go to sony xperia support
Sent from my C6902 using XDA Free mobile app
Konan- said:
Try pressing vol up +power button if it vibrates thats good means you might be in a soft brick and also if your not rooted or bl is unlockd go to sony xperia support
Sent from my C6902 using XDA Free mobile app
Click to expand...
Click to collapse
As i said before my power button does not work...but when i charge the phone pushing the red button near the sim card makes the phone vibrate..i cant afford to get sony support ...but i'm rooted and have locked bootloader(yep,, not so sure about the TA backup).so is there anything i can do???? thanks for trying to help btw..
ZEUZ THE ATOM said:
As i said before my power button does not work...but when i charge the phone pushing the red button near the sim card makes the phone vibrate..i cant afford to get sony support ...but i'm rooted and have locked bootloader(yep,, not so sure about the TA backup).so is there anything i can do???? thanks for trying to help btw..
Click to expand...
Click to collapse
Red LED = dead battery. If you can't get it to charge in fastboot mode (just leave it plugged in for a day or two), then you'll need to disassemble the phone to either replace the battery or force it to charge - the latter of which is only if you know what you're doing (Li-ons like to catch fire and explode). You should obviously fix the power button while you're in there.
There is nothing else to be said about it.
Thanx xasbo...i already figured that out my self and opened up my phone and disconnected the battery from the motherboard and kept it away for sometime and went on for the power button...i tried everything but power button seems okay..it's not a hardware issue...so i reconnected the battery and left it charge for the whole evening and voila it turned itself on with56% of battery... ..anyway thank you all for supporting me... you guys are awesome..:thumbup:
ZEUZ THE ATOM said:
Thanx xasbo...i already figured that out my self and opened up my phone and disconnected the battery from the motherboard and kept it away for sometime and went on for the power button...i tried everything but power button seems okay..it's not a hardware issue...so i reconnected the battery and left it charge for the whole evening and voila it turned itself on with56% of battery... ..anyway thank you all for supporting me... you guys are awesome..:thumbup:
Click to expand...
Click to collapse
:good: good deal.
iirc, the power button is run through one of the flex cables, they can tear very easily and sometimes it is difficult to see. the replacement flex is cheap, just a few bucks, might be worth trying.
Okay...i'll try replacing the ribbon...thanx bro...:thumbup::thumbup::thumbup:u are awesome...
@xasbo
Dude plz help me my z1 turns off when it finishes the boot animation..already flashed ftfs..at kitkat the phone keeps restarting..on jellybean still the same..it only finishes the boot animation only in 5.0.2...any advice????
ZEUZ THE ATOM said:
@xasbo
Dude plz help me my z1 turns off when it finishes the boot animation..already flashed ftfs..at kitkat the phone keeps restarting..on jellybean still the same..it only finishes the boot animation only in 5.0.2...any advice????
Click to expand...
Click to collapse
Sounds like a pretty normal bootloop. Make sure you're flashing the right FTF for your specific C690x device. Start with a completely stock FTF and work up from there.
xasbo said:
Sounds like a pretty normal bootloop. Make sure you're flashing the right FTF for your specific C690x device. Start with a completely stock FTF and work up from there.
Click to expand...
Click to collapse
Already tried like 20 times but same result...i'm soo fed up with this phone..is there anyway i could bring it back like the old times???
ZEUZ THE ATOM said:
Already tried like 20 times but same result...i'm soo fed up with this stupid phone..is there anyway i could bring it back like the old times???
Click to expand...
Click to collapse
Are you trying to flash from recovery or fastboot? If the former, try the latter.
Or you can just send it into Sony for repair.
Don't blame the phone, though - you're the one that broke it. :good:
Red LED doesn't automatically mean dead battery. Reading the whole thread, You said (before opening the phone) that it would turn on own it's own, and turn back off. Your phone is soft bricked. It kept trying to boot up but since it's on a boot loop it would power on, get stuck, power off, then powers on again - hence called a boot loop. Boot loops can drain the battery which is why pressing the PWR+VOL UP was advised so you can power off the phone completely. By powering it off, you can then charge the phone up to 100% so you can work out the boot loop that you are on. I have no knowledge about actual hardware stuff like that of opening the phone, so I cannot comment on the power button that is broke. But one thing I can say is, it's easy to revive a soft bricked phone that doesn't have a broken power button. So this comment is basically me threading all the symptoms you have mentioned and explain it in the best manner I can. I have experienced lots of boot loops myself and have managed to revive my nasty Z1 which is why I am a little familiar with it's symptoms. I do hope you get the power button fixed so reviving your phone would be easy.
Deathschythe33 said:
Red LED doesn't automatically mean dead battery. Reading the whole thread, You said (before opening the phone) that it would turn on own it's own, and turn back off. Your phone is soft bricked. It kept trying to boot up but since it's on a boot loop it would power on, get stuck, power off, then powers on again - hence called a boot loop. Boot loops can drain the battery which is why pressing the PWR+VOL UP was advised so you can power off the phone completely. By powering it off, you can then charge the phone up to 100% so you can work out the boot loop that you are on. I have no knowledge about actual hardware stuff like that of opening the phone, so I cannot comment on the power button that is broke. But one thing I can say is, it's easy to revive a soft bricked phone that doesn't have a broken power button. So this comment is basically me threading all the symptoms you have mentioned and explain it in the best manner I can. I have experienced lots of boot loops myself and have managed to revive my nasty Z1 which is why I am a little familiar with it's symptoms. I do hope you get the power button fixed so reviving your phone would be easy.
Click to expand...
Click to collapse
Thanx dude....best reply ever!!!!!!!
Deathschythe33 said:
Red LED doesn't automatically mean dead battery. Reading the whole thread, You said (before opening the phone) that it would turn on own it's own, and turn back off. Your phone is soft bricked. It kept trying to boot up but since it's on a boot loop it would power on, get stuck, power off, then powers on again - hence called a boot loop. Boot loops can drain the battery which is why pressing the PWR+VOL UP was advised so you can power off the phone completely. By powering it off, you can then charge the phone up to 100% so you can work out the boot loop that you are on. I have no knowledge about actual hardware stuff like that of opening the phone, so I cannot comment on the power button that is broke. But one thing I can say is, it's easy to revive a soft bricked phone that doesn't have a broken power button. So this comment is basically me threading all the symptoms you have mentioned and explain it in the best manner I can. I have experienced lots of boot loops myself and have managed to revive my nasty Z1 which is why I am a little familiar with it's symptoms. I do hope you get the power button fixed so reviving your phone would be easy.
Click to expand...
Click to collapse
How ever i have managed to turn my z1 on but after the purple boot animation thing white box popup saying "finishing boot" but after few seconds device turn off...even with 100% battery..no matter how much i flash ftfs every time this happens..any advice???
ZEUZ THE ATOM said:
How ever i have managed to turn my z1 on but after the purple boot animation thing white box popup saying "finishing boot" but after few seconds device turn off...even with 100% battery..no matter how much i flash ftfs every time this happens..any advice???
Click to expand...
Click to collapse
The device turns off - like turns off completely or it still reboots as if you are still stuck in a boot loop?