No connecting ,No serivice ,Phone DEAD ,please Help! - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

I'm a beginer but intersted in Rom upgrading.I've been flashing a lot of Rom ,no problem all the time.
Yesterday I went to Clockwordmod,wipe data,davik cache,and formated all option in "mount and storage": including "modem" "preload"....After that,install CM11 and ggapsp
Here's the problems:
1/No network service although reinstall ROM
2/In Setting,Baseband versioin displays in XXXXX(unknown)
3/Check the IMEI is still correct with IMEI was stick in the back of phone(under battery slot)
4/Googled but it is difficult to understand and to follow the instruction.Evenmore,i dont know which is my issue to follow :crying:
PRO,please help me ,the Phone is dead now.THANKS ALL,LOVE YOU GUYS :fingers-crossed::crying:

@therocketeer
Download andoid 2.3.4 stock rom (3 file version) and install it via Odin. This should solve the issue.
#KeepItSlim

MikiGry said:
@therocketeer
Download andoid 2.3.4 stock rom (3 file version) and install it via Odin. This should solve the issue.
#KeepItSlim
Click to expand...
Click to collapse
Thanks pro!a little wondering that the Stock Rom of gti9070 is adroid 2.3.6 .I found out this post has this Rom(alos 3 file ver).Could it work?
http://forum.xda-developers.com/showthread.php?t=2100642

@therocketter
Sorry , I'm using galaxy s II (i used to have janicep) .
This thread should help
http://forum.xda-developers.com/showthread.php?t=2100642
And please make sure , that u have I9070 model (check under the battery).
#KeepItSlim

MikiGry said:
@therocketter
Sorry , I'm using galaxy s II (i used to have janicep) .
This thread should help
http://forum.xda-developers.com/showthread.php?t=2100642
And please make sure , that u have I9070 model (check under the battery).
#KeepItSlim
Click to expand...
Click to collapse
It's not working :crying: Try another ways but...useless!!!

Pro,another ideas please :crying: ?

Related

[Q] Phone Brick pls help!

I flash on my galaxy 9000 whit firmware GT_I9000_XXJVR_XXJVR, firmaware I9003XXKPE.
now the pfone is brick and i want to know if is somthing to do.
i am sory for my bad englesh.
pls help me.
nightmare30 said:
I flash on my galaxy 9000 whit firmware GT_I9000_XXJVR_XXJVR, firmaware I9003XXKPE.
now the pfone is brick and i want to know if is somthing to do.
i am sory for my bad englesh.
pls help me.
Click to expand...
Click to collapse
Reinstall again but without i9003 files only with i9000 files.
Sent from my GT-I9000 using Tapatalk
nightmare30 said:
I flash on my galaxy 9000 whit firmware GT_I9000_XXJVR_XXJVR, firmaware I9003XXKPE.
now the pfone is brick and i want to know if is somthing to do.
i am sory for my bad englesh.
pls help me.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1120784
i wish to update but the phone is death.
nothing works.
i gues is my fould but why the 9003 development is posted in 9000 category?
i am noob and is my fould but i think it must mouve the development for 9003.
nightmare30 said:
i gues is my fould but why the 9003 development is posted in 9000 category?
i am noob and is my fould but i think it must mouve the development for 9003.
Click to expand...
Click to collapse
You have an I9000 or an I9003 SGS?
Sent from my GT-I9000 using Tapatalk
i have a sgs i9000 and i flash i9003 soft.
nightmare30 said:
i have a sgs i9000 and i flash i9003 soft.
Click to expand...
Click to collapse
Ok. The phone charge while your sgs is off and plugged in electricity?
Sent from my GT-I9000 using Tapatalk
Is death man.not even charging.nothing works.
Take the battery out for a few minutes and try to get into download mode with 3-button combo.
there is no solution now
becouse i dont this after flashing i9003 firmware yoy will not be able to get in download mode the only solution is samsung service center
i gues is the best solution for now.
if anibody hava the same problem pls reply to my post.
i try to go to service.
done
i just get my phone from service.is back to life.
i have a advice for all nobs.
if you wish to make an update make it via kies from samsung or read the post 100 time and make 1 time flash to your phone.in rest don't fuking doit!!!!!!!
regards!!!

N7000 CameraFirmware ,please help me !!!!!!

now my note cant find my camerafirmware at *#34971539# and when i press check version will error , i don't known why , and i tried to flash ohter rom still at the same , i can't flash official rom , now i am using gb, i so difficult , please help me !!!
please help me !!!XDA !!
Kimlim88 said:
please help me !!!XDA !!
Click to expand...
Click to collapse
Reflash ICS Latest Roms using pc odin...!!!

[Q] Galaxy Ace GT S5830 - Wifi & Bluetooth not working

Hi All,
Problem is my Wifi & BT not working on my phone.
Model No : GT-S5830
Android Version : 4.0.4
Baseband Ver : S5830XWKPA
Earlier this phone was Ace M240 Korean version (on which Wifi & BT was working fine). On which i flashed the originial S5830XWKPA stock rom & then mclaw cyanogen mod version 9.
Please help me on this how to get it solved.
lostmink said:
Hi All,
Problem is my Wifi & BT not working on my phone.
Model No : GT-S5830
Android Version : 4.0.4
Baseband Ver : S5830XWKPA
Earlier this phone was Ace M240 Korean version (on which Wifi & BT was working fine). On which i flashed the originial S5830XWKPA stock rom & then mclaw cyanogen mod version 9.
Please help me on this how to get it solved.
Click to expand...
Click to collapse
Check if the ROM u flashed has wifi and Bt working if not try a factory reset for a formal sake and check if workin :good:
Check
wilfredcool007 said:
Check if the ROM u flashed has wifi and Bt working if not try a factory reset for a formal sake and check if workin :good:
Click to expand...
Click to collapse
Hey thanks for the reply. I tried installing couple of stock ROMs but its not working on any one.
is there any other way to check before installing ?
Please help me in this...
lostmink said:
Hey thanks for the reply. I tried installing couple of stock ROMs but its not working on any one.
is there any other way to check before installing ?
Please help me in this...
Click to expand...
Click to collapse
Nop.... Looks like u've been held up with a hardware problem but hardware failures is a rare phenomena try a factory rest nd check else give it to the service centre
Sent from my GT-S5670 using XDA

[Q] Jelly Bean 4.1.2

Hey guys
First I really want to thank you for the nice tips and support.
Now I want to install Jelly Bean 4.1.2 on my Galaxy S Advance.
I have watched this vid: /watch?v=2W2NVfGJ0Cc
And many people had problems with it. (I saw it in the comments)
I will use Odin 3 as showed in the video
Do you have any Tips for me?
What could go wrong?
Greetings from Switzerland!
camtista said:
Hey guys
First I really want to thank you for the nice tips and support.
Now I want to install Jelly Bean 4.1.2 on my Galaxy S Advance.
I have watched this vid: /watch?v=2W2NVfGJ0Cc
And many people had problems with it. (I saw it in the comments)
I will use Odin 3 as showed in the video
Do you have any Tips for me?
What could go wrong?
Greetings from Switzerland!
Click to expand...
Click to collapse
Only thing that could go wrong is that you get some powercut in the middle of flashing firmware. And in time when part where files for download mode is being installed. As I know. All other is fixable.
About one question there:
dear sir i have download firmware home i9070 347mb file first i swith off my mob after i vol+home +power and download mode i open odi3 and connect my usb port my lappy and select pda but one also prblm i m facing i select pda but there arr no select firmware file.fimware is a winrar file .sir plz help me how to select firmware in my documnet bcoz i tried many time but there are no firmware file in pda option plz help me last 2 days i did try my best but i can't do sir hope u given me suggestion
Click to expand...
Click to collapse
He only needed to unpack it. It should be about 700MB.
camtista said:
Hey guys
First I really want to thank you for the nice tips and support.
Now I want to install Jelly Bean 4.1.2 on my Galaxy S Advance.
I have watched this vid: /watch?v=2W2NVfGJ0Cc
And many people had problems with it. (I saw it in the comments)
I will use Odin 3 as showed in the video
Do you have any Tips for me?
What could go wrong?
Greetings from Switzerland!
Click to expand...
Click to collapse
I have flsahed sgsa with JB pz version with odin 3, and it works perfect. All installed apps that i had in gb were taken over in JB.
After that i rooted my phone. Im only looking now for triangle to update so i can reset my counter to 0.
Phoneboot said:
I have flsahed sgsa with JB pz version with odin 3, and it works perfect. All installed apps that i had in gb were taken over in JB.
After that i rooted my phone. Im only looking now for triangle to update so i can reset my counter to 0.
Click to expand...
Click to collapse
Well,I'm also using the JB pz ROM and rooted my phone and also using TZ kernel(thanks to varun great work)
but,mine binary counter still 0.
What i mean is,my SGSA doesn't need any to reset the counter.
How do you flash yours?

showing no service after flashing cyanogenmod 11 kitkat rom

i recently flash cyanogen 11 kitkat rom on my galaxy s advance having baseband ddlk2...
after installing rom all working good except radio service.
it showing radio service off on about phone section and no service on status bar.i cant use network.so plz help...
How to overcome this bug? Plz help thanks in advance...
????????????????
DDLK2 ???. But that is the baseband of gingerbread 2.3.6 Indian Firmware. I recommend flashing latest jellybean ROM/baseband of your country.
Hopefully that should solve it. Good Luck.
ronaxdevil said:
i recently flash cyanogen 11 kitkat rom on my galaxy s advance having baseband ddlk2...
after installing rom all working good except radio service.
it showing radio service off on about phone section and no service on status bar.i cant use network.so plz help...
How to overcome this bug? Plz help thanks in advance...
Click to expand...
Click to collapse
You MUST be on JellyBean before you install CM11.
thanks for help I will try jb... can u give any link of jb rom....
ronaxdevil said:
thanks for help I will try jb... can u give any link of jb rom....
Click to expand...
Click to collapse
IMPORTANT: do not install I9070 firmware on I9070P phone, do not install I9070P firmware on I9070 phone. Firmware is not the same as ROM, you can install ROM, but if you miss firmware - YOU WILL HARDBRICK PHONE.
Look for firmware here: http://www.samfirmware.com/ and http://samsung-updates.com/
After that follow this guide: http://forum.xda-developers.com/showthread.php?t=1985398
Rest of your reading is here: http://forum.xda-developers.com/showthread.php?t=2094318
Tip: Search is very usefull thing.
ronaxdevil said:
thanks for help I will try jb... can u give any link of jb rom....
Click to expand...
Click to collapse
Search and read carefully this forum.
You can find JB firmware on www.samsung-updates.com or on www.sammobile.com.

Categories

Resources